Oparation Manual
Contents
1. Connect Monitor Power The monitor has a rechargeable battery Plug in the AC adaptor and connect the cable to the DC5V socket on the monitor The power indicator will light in red or the battery capacity icon on LCD of monitor will blink indicating that it is charging and will turn off after a full charge Connect the camera and flexible tube Connect the camera tube to the instrument body ensure that the keyed ends are properly aligned Once aligned tighten the knurled knob to hold the connection firmly in place 4 BR200 V3 0 6 09 Inserting the micro SD card Insert card with arrow pointing toward slot Gently apply pressure until card locks into the spring loaded slot To remove from unit gently push the card inward and then release to eject it from the card slot Installing the accessory tools The included accessories mirror hook and magnet all attach to the camera in the same manner Refer to the diagrams below Attaching the Monitor to the instrument body 5 BR200 V3 0 6 09 Connect the USB Cable Use the USB cable to connect the monitor to a PC The USB online icon will appear on the PC Open My Computer on the PC and locate the Mobile Disk The Mobile disk can be used and accessed in the same manner as any external hard drive Video Output Insert the video cable into the VIDEO OUT socket on the monitor Insert the other end of the cable into the VI2. O Q e ANOnARWN 2009 02 11 00 05 4 2009 02 11 50 00 6 7 7 BR200 V3 0 6 09 Viewing a Photo or Video 1 7 8 In the Real Time Monitoring mode press to display a list of dated playback folders Use the Y A keys to select the desired folder 2009 05 14 Press OK to open the selected folder and view 2009 05 21 a list of photo or video files 2009 06 10 Files are listed by time followed by VID for photos or VID for videos Use the Y A keys to select a file Press OK to display the selected photo or 2009 06 10 0001 0004 video For video files Press OK to pause while playing Press again to resume A Fast Forwards the video Y Rewinds the video 0001 0003 Press e to stop video Press e to return to menu Press e again to exit Note Video automatically saves to file every 30 minutes When the SD card is filled to capacity the SD card icon changes to F The SD card icon may also show F if there is no card installed No video will be recorded if the SD card is not inserted in the slot Delete a Single Video Or Photo 1 0001 0003 PLAYBACK In the Real Time Monitoring mode press e to display a list of dated playback folders 2009 05 14 2009 05 21 Use the Y A keys to select the desired folder 2009 06 10 Press OK to open the selected folder and view a list of photo or video files Files are listed by time followed by VID for photos or VID
3. Press OK to call up the SYSTEM icon list Use the arrow keys to highlight the Language icon globe Press OK and the Language icon list will appear flags Use the arrow keys to highlight the desired language 6 Press OK to select the highlighted language and exit oP ON Video System Settings 1 In Settings Mode use the arrow keys to select SYSTEM SETTING green icon Press OK to call up the SYSTEM icon list Use the arrow keys to highlight the Video System icon yellow Press OK and the Video format selections will appear NTSC PAL Use the arrow keys to highlight the desired format 6 Press OK to select the highlighted format and exit g Ew O Format and Erase Media In Settings Mode use the arrow keys to select SYSTEM SETTING green icon Press OK to call up the SYSTEM icon list Use the arrow keys to highlight the FORMAT icon blue Press OK and the FORMAT selection screen will appear YES NO Use the arrow keys to highlight the desired response Press OK to accept the selection and exit DO BO Oia Restoring Factory Default Settings 1 In Settings Mode use the arrow keys to select SYSTEM SETTING green icon Press OK to call up the SYSTEM icon list Use the arrow keys to highlight the DEFAULT icon red Press OK and the DEFAULT selection screen will appear YES NO Use the arrow keys to highlight the desired response Press OK to accept the selection and exit O01 e ON 9 BR200 V3 0 6 09 View Version In Settings Mo
4. A FLIR COMPANY warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment a six month limited warranty applies to sensors and cables If it should become necessary to return the instrument for service during or beyond the warranty period contact the Customer Service Department at 781 890 7440 ext 210 for authorization or visit our website www extech com for contact information A Return Authorization RA number must be issued before any product is returned to Extech The sender is responsible for shipping charges freight insurance and proper packaging to prevent damage in transit This warranty does not apply to defects resulting from action of the user such as misuse improper wiring operation outside of specification improper maintenance or repair or unauthorized modification Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct indirect incidental or consequential damages Extech s total liability is limited to repair or replacement of the product The warranty set forth above is inclusive and no other warranty whether written or oral is expressed or implied 3 BR200 V3 0 6 09 Installation Install the batteries into the instrument body charge the monitor battery connect the camera and flexible tube to the body insert the micro SD card Install any accessory as needed Battery Installation
5. DEO IN jack of a TV or other monitor The LCD Monitor will output a high quality video image Installing the Magnetic bracket The magnetic bracket slides onto the rear of the monitor for convenient placement and viewing 6 BR200 V3 0 6 09 Operation Basic Operation 1 Turn the ON OFF dial switch to power the camera The power indicator will switch on The switch then acts as a dimmer for the two LEDs on the imager head of the camera 2 Press and hold the monitor power switch for at least 2 seconds and the power indicator will illuminate green and a Welcome screen will appear 3 Press the down arrow button to select channel 4 The real time image will appear on the display LCD monitor EP or pho F Use the up arrow to select video 3 or photo O mode Turn the ON OFF dial to adjust the LED light intensity as desired The tube can be easily maneuvered into position The tube can be bent into the shape of the area to be examined 7 Use the supplied accessories to help retrieve small items Taking a Picture E In Photo LO mode press OK to take a picture The photo will automatically save to the SD card Recording a Video In Real Time Monitoring video mode press OK to begin recording refer to the following diagram for display icon definitions Battery capacity Function icon video or photo Recording in progress Channel Date Time Stamp REC Time remaining SD card UN
6. User s Guide EXTECH INSTRUMENTS A FLIR COMPANY Video Borescope Model BR200 Introduction Congratulations on your purchase of this Extech BR200 Video Borescope This instrument was designed for use as a remote inspection device It can be used to peer into tight spots and then supply real time video and images that can be recorded Typical applications include HVAC inspection automotive inspection cable routing and automotive boat aircraft inspection This meter is shipped fully tested and with proper use will provide years of reliable service Features 3 5 TFT LCD palm LCD monitor with high resolution e The image head and the cable are water resistant when the unit is fully assembled the monitor and the camera are not water resistant e Wireless and hard wired functionality e The monitor records video and images SD card capacity 16G Supplied Equipment 1 Camera LCD Monitor Monitor Adaptor Adaptor cable i A LY 4 5 6 Accessory Magnet Hook Mirror DO e N Magnetic mount 2 BR200 V3 0 6 09 Description 1 Signal output 2 Power Indicator 3 Power On Off Dimmer 4 Flexible tube 5 Camera and LED s 6 OK 7 Up video or jpg 8 Menu 9 Down Channel select 4 10 Power On Off 11 Power Indicator 12 USB Socket 13 Video output 14 SD card socket 15 Power supply socket 16 Reset 17 Signal input 16 17 Warranty EXTECH INSTRUMENTS CORPORATION
7. curacy 11 BR200 V3 0 6 09 Support line 781 890 7440 Technical Support Extension 200 E mail support extech com Repair amp Returns Extension 210 E mail repair extech com Product specifications subject to change without notice For the latest version of this User Guide Software updates and other up to the minute product information visit our website www extech com Extech Instruments Corporation 285 Bear Hill Road Waltham MA 02451 Copyright O 2009 Extech Instruments Corporation a FLIR company All rights reserved including the right of reproduction in whole or in part in any form 12 BR200 V3 0 6 09
8. de use the arrow keys to select SYSTEM SETTING green icon Press OK to call up the SYSTEM icon list Use the arrow keys to highlight the VERSION icon green Press OK to view the version Press OK again to exit Frame Rate Setting 1 2 3 4 5 6 In Settings Mode use the arrow keys to select RECORDER SETTING red icon Press OK to call up the RECORDER options Use the arrow keys to highlight the FPS frames per second icon Press OK to open the FPS parameter Use the arrows to select the frame rate 10 15 20 25 or 30 Press OK to confirm Time Stamp ON OFF Setting la 2 3 4 5 6 In Settings Mode use the arrow keys to select RECORDER SETTING red icon Press OK to call up the RECORDER options Use the arrow keys to highlight the Time Stamp icon purple Press OK to open the parameter Use the arrows to select ON or OFF Press OK to confirm Date Time Setting ie OB 910 In Settings Mode use the arrow keys to select DATE TIME SETTING yellow icon Press OK to call up Date and Time Settings window Use OK to tab through the fields Use the arrow keys to change a field setting Press the e button to exit Safety Do not expose instrument to moisture Shut off the instrument when not in use Remove the batteries when cleaning the instrument Replace all batteries at the same time 10 BR200 V3 0 6 09 Specifications CAMERA Imaging Sensor Total Pixels Horizontal View Angle Transmission Freque
9. for videos Use the Y A keys to select a file Press and HOLD the e button the display will show DELETE CURRENT FILE Use the arrow keys to select YES or NO Press OK to accept selection 0001 0004 2009 06 10 Press e twice to exit the Delete screen Delete a File Folder To delete a folder use the same instructions for deleting a single video or photo The only additional concern is that if a folder is not empty it cannot be deleted Delete all of the files in a folder before deleting the folder If the user attempts to delete a folder that is not empty the following message will appear FOLDER NOT EMPTY 8 BR200 V3 0 6 09 Video Display on a PC Several methods are available to playback or to copy video files on a PC When connected the files will become available as new drives on the PC 1 SD card adaptor Insert the mini SD card into the SD adaptor and then insert the adaptor into the PC SD slot if available 2 USB adaptor Insert the mini SD card into a USB adaptor and plug into a USB port 3 USB cable Connect the USB cable from the camera to the PC Note If the avi video files will not play on any installed media software a software plug in is available on the supplied CD which will allow compatibility with Media Player Settings Mode Press and hold e for at least two seconds to enter the Settings Mode Language Settings 1 In Settings Mode use the arrow keys to select SYSTEM SETTING green icon
10. ncy Minimum Illumination Modulation Type Bandwidth Power Supply Unobstructed Effective Range Waterproof Capacity Dimensions W D H Weight approx MONITOR LCD Screen Type Effective Pixels Video System Transmission Frequency Exterior Supply Voltage Consumption Current Max Charge Time Work Time Video Output Level Receiving Sensitivity Dimensions W x D x H Weight Approx Operating Temperature Operating Humidity Max FCC Information CMOS 704 576 PAL 712 486 NTSC 50 degree 2468MHz 0 Lux FM 18MHz 4 x AA batteries 10m IP67 imager head only 186 x 145 x 41 mm Exclude 530g Flexible Tube 3 5 TFT LCD 320 R G B x 240 PAL NTSC 2414 2432 2450 2468MHz 5VDC 680mA 3 hours 1 5 hours 0 9 1 3VP P 750 85dBm 100 x 70 x 25 mm 140g 10 C 50 C 14 F 122 F 15 85 RH This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Calibration and Repair Services Extech offers repair and calibration services for the products we sell Extech also provides NIST certification for most products Call the Customer Care Department for information on calibration services available for this product Extech recommends that annual calibrations be performed to verify meter performance and ac
Download Pdf Manuals
Related Search