User Manual - US Cellular
Contents
1. Do not use excessive force to insert the plug e Make sure the plug is facing the right way and lined up correctly Insert it gently Installing the Battery and SIM Card 1 Slide the back cover and remove it 10 2 Install the battery IMPORTANT Your device only supports the 4G LTE SIM card To avoid damaging the device please use the card that comes installed or included in the box of the router 11 Indicators Indicator State Description Power Green steady AC power present Off No AC power Voicemail Green blinking New voicemail waiting ao Off No new voicemail Green steady More than 50 discharging charger not present or fully charged Green blinking More than 50 charging charger present Battery Yellow steady 20 50 discharging charger not present Yellow blinking 20 50 charging charger present Less than 20 discharging Red steady charger not present 7 Red blinking Less than 20 Charging charger present Off Battery not present 12 Wi Fi Green steady Wi Fi on i Fi S Blinking Active data connection Off Wi Fi off Connected to the LTE Green steady network Dat Yellow stead Connected to CDMA 1x or w ma Y EVDO Network Birk R inkin oamin Dual g 2 No service limited service Red steady searching no 4GLTE SIM card or other abnormal status Green stead2. For Wireless Broadband mode Please select the Wireless Broadband Mode and click Apply On this mode you need to use your 4G LTE SIM card to connect to your Internet service You can change dial up settings network selection and APN Current mode Wireless Groadbens ESS Logout eo a Dial up Settings WAN Connection mooe Automate gt Am Check here you can comet ontamet in Dwa roaming status WI FI Settings O Manual Device semngs rema sees Router Stings 31 Settings Do not modify any settings unless instructed by your service provider Network Settings e Dial up Settings After the client is connected to your router successfully you can access the Internet in the Automatic or Manual mode The default mode is Automatic Mode Operations Your device is automatically connected to Automatic the Internet and you can surf the Internet through the client Log in the Web Portal Configuration Page and select Settings gt Network Settings Manual gt Dial up Settings gt Manual To change the current setting please disconnect from network then Apply 32 e Network Selection Select Settings gt Network Settings gt Network Selection you can change the network selection mode as follows Network Selection era m Device Settings maan sas gt LTE CDMA mode Default 4G LTE preferred network gt 3G auto CDMA EVDO 1X Hybrid mode 33 APN To connect to the Inter
3. Warranty Period This warranty is not transferable Should a defect appear during the Warranty Period U S Cellular will send a replacement 4G LTE SIM Card to Your address within the United States without charge provided that you request the replacement 4G LTE SIM Card during or within thirty 30 days following the Warranty Period by calling U S Cellular Customer Service at 1 888 944 9400 or dialing 611 on Your U S Cellular handset or by visiting a U S Cellular retail store REPLACEMENT OF THE 4G LTE SIM CARD AS PROVIDED HEREIN IS YOUR EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF TITLE FITNESS FOR A PARTICULAR PURPOSE MERCHANTABILITY NON INFRINGEMENT OR ARISING FROM COURSE OF DEALING OR USAGE OF TRADE NEITHER U S CELLULAR NOR ANY OF ITS AFFILIATES OR RETAILERS SHALL BE LIABLE TO YOU FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL ECONOMIC EXEMPLARY PUNITIVE OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF DATA LOSS OF REVENUE OR PROFITS DAMAGE TO PROPERTY OR LOSS OF USE IN NO EVENT SHALL U S CELLULAR S ITS AFFILIATES OR RETAILERS LIABILITY TO YOU OR ANY THIRD PARTY WITH RESPECT TO THE 4G LTE SIM CARD EXCEED THE COST OF REPLACING THE 4G LTE SIM CARD THIS LIMITED WARRANTY SHALL BE CONSTRUED UNDER THE LAWS OF THE STATE OF ILLINOIS EXCLUDING ITS CONFLICTS OF LAW PROVISIONS 4 SOME S
4. Settings gt Wi Fi Settings gt Black List to enable or disable black list You can enable the black list so that the devices in the black list are not allowed to connect to this router Meton Settings Black List 2 4GHz Black List Switch Enable Disable gt 50 GHz Bus No Host Name MAC Address Device Settings Firewall Device Information Router Settings SS SS No Host Name MAC Address 39 WPS Select Settings gt Wi Fi Settings gt WPS You can enable Wi Fi Protected Setup WPS by PIN PIN code or PBC push button mode the two modes are described below WPS 2 4GHz SSID SSID USCC MF275U 0888 WPS OPIN OPEC Device Settings Frewat WPS 5 0GHz SSID Router Steps SSID USCC MF275U 0888 WPS OPIN Pec gt PIN Set the client s PIN code in client PIN field gt PBC Press the WPS button of the router or select PBC and then click Apply Press the WPS button on the client wireless adapter within two minutes and the negotiation process will be established 40 Device Settings Voice Capability Set to enable voice capability switch Web Portal i Set the login password Passwords Set all the settings to their factory Reset default values and then the router will restart automatically Restart Restart the router Set the Wi Fi range and device sleep Power Save time to save your router s battery power Set the time by auto or configure SNTP manu
5. battery cover 18 5 The client will connect to your device Choose a wireless network dan tam net boom to canto a rls natah in ranae or to a raroa a to omt more Via Ethernet port 1 Connect the Ethernet cable to the LAN port and your computer 19 2 Your computer will acquire network connection via Router with Voice and get connected to the internet automatically WPS Functionality Your device supports WPS functionality You can use this function to connect the client to your device 1 Power on your device and enable the Wi Fi function on your device 2 Press the WPS button on your device to start Wi Fi Protected Setup authentication process 3 Enable the WPS function on your client to respond to this authentication process 4 Follow the system prompts on your client to finish the connection 20 Voice Function Making a Call To make a call 1 Pick up the handset 2 Key in the telephone number 3 You can either press the key on the telephone to send the call or wait 4 8 seconds for the call to be connected automatically 4 The call will be connected NOTE If there is no signal indication the radio signal is unavailable Change the location of the router and make sure that nothing is blocking it Answering a Call When the phone rings pick up the handset to answer it If the telephone has hands free functionality you can also answer the call by pressing the Hands fr
6. 4G LTE Router with Voice User Manual U S Cellular Customer Service 1 888 944 9400 ZTE LEGAL INFORMATION Copyright 2014 ZTE CORPORATION All rights reserved No part of this publication may be excerpted reproduced translated or utilized in any form or by any means electronic or mechanical including photocopying and microfilm without the prior written permission of ZTE Corporation Notice The manual is published by ZTE Corporation We reserve the right to make modifications on print errors or update specifications without prior notice Disclaimer 4G LTE is not available in all areas See uscellular com 4G for complete coverage details 4G LTE service provided through King Street Wireless a partner of U S Cellular LTE is a trademark of ETSI ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software Images and screenshots used in this manual may differ from the actual product Content in this manual may differ from the actual product or software SIM Card Limited Warranty Subject to the exclusions contained below United States Cellular Corporation U S Cellular warrants to the original purchaser You or Your of the handset with which the 4G LTE SIM Card was provided that the 4G LTE SIM Card will be free from defects in material and workmanship for a period of one 1 year from the date You purchased the handset the
7. FESEWNGS crisan aaia adie 36 Device Setting Si rranoiiro snina 41 Firewall csccsccstesceveecssneeseves Eaa ar A 42 Router Settings cccecceceeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeas 49 Warning and Notice saesesneeenneennnnnnsennrrennnrnnnnena 50 Radio Frequency RF Exposure cccsseeee 53 FCC Compliance cecceseeesseneeeeeeeeseeeeenesneeeees 54 Troubleshooting ccccesceeesseeeseeeesseeeeeeeneneseeees 56 Getting to Know Your Device Appearance 4G LTE SIM card slot Insert your 4G LTE SIM Card 2 Reset button Reset your router External antenna connector To get strength signal WPS button This button is used to start end the Wi Fi Protected Setup authentication process and enable disable the Wi Fi function e Hold it for 3 seconds to activate the WPS Function e When the WPS function is available press it to deactivate the WPS function Press it to enable disable the Wi Fi WPS function Phone Standard RJ11 connector for the telephone LAN Ethernet connector to computer Power Socket Connector to the external power supply Power Switch Turn your router on or off IN Indicators Indicate the status of your router Device Installation Before You Begin You can charge your router by using an adapter Insert the charger lead carefully with the plug arrow facing the bottom of the router
8. Put the phone on hook and try again If you are connected to the Internet using the CDMA network please disconnect this first After dialing the last digit hear silence When you have finished dialing you can press the key or wait 4 8 seconds to connect the call Cannot make or receive a call when surfing on the Internet If you are connected using the CDMA network then you cannot surf the net and make a phone call simultaneously Please disconnected the internet and wait 30 seconds to 1 minute before making a call 57 Internet Related Problems Symptoms Possible Problems Solutions Cannot access the Internet at all e Please check your configuration settings e Please wait 1 2 minutes for the router to initialize e Check your service indicator LED s The download or upload speeds are very slow e The speed is dependent on signal strength Check your signal strength and network type Cannot visit the Web Portal configuration page e Enter the correct address The default address is http 192 168 1 1 or http uscc router Only use one network adapter in your PC e Do not use any proxy server 58 Symptoms Possible Problems Solutions Cannot establish the Wi Fi connection between your router and client e Make sure the Wi Fi function is active Press the WPS button to enable the Wi Fi WPS function e Re
9. Set the destination IP address that will be filtered gt Protocol Set which protocol will be used for filtering gt Action Set how to handle the packet if it matches with the rule gt Comment Type comment for the filter settings NOTE Filtering rules are matched one by one If this provision is met it will not continue to match the rules listed below To add a new rule 1 Input the detail information in the Mac IP Port Filtering area 2 Click Apply in the Mac IP Port Filtering area To delete a rule Select the rule in the Current Mac IP Port Filtering rules in the system area then Click Delete 44 e Port Forwarding You can setup virtual servers to provide services on the Internet Select Firewall gt Port Forwarding the virtual server settings is shown in the following figure ooo e ee o aoe eee Port Forwarding WAF Settings Device Settings Virtual Server Settings Enable Disabie 45 If you select Enable then Apply the Virtual Server Settings will appear Port Forwarding Settings IP Address e g 192 168 0 101 Port Range 1 65535 Protocol TCP UDP x Comment Current Virtual Servers in system IP Address Port Range Protocol Comment IP Address Set IP address for the virtual server gt Port Range Set port numbers for the virtual server gt Protocol Set protocol for the virtual server gt Comment Type comments for the virtual server settings 46 Click Apply
10. Seti OnCP Sener gt IP Address IP address for LAN interface gt Subnet Mask Subnet mask for the IP address gt DHCP Server Enable or disable DHCP server function gt DHCP IP Pool Allocate begin and end IP address for IP pool gt DHCP Lease Time Define how long the leased IP address will be expired and will relocate new IP address Click Apply to confirm your configuration 49 Warning and Notice Safety Precautions Some electronic routers may be susceptible to electromagnetic interference Locate the router away from the TV radio and other electronic equipment to avoid electromagnetic interference The router may interfere with medical routers like hearing aids and pacemakers Consult a physician or the manufacturer of the medical router before using the router Please keep yourself at least 20 centimeters away from router Do not use your router in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed Please use original accessories or accessories that are authorized by ZTE Unauthorized accessories may affect the router performance damage the router or cause danger to you 50 Do not attempt to dismantle the router There are no user serviceable parts Do not allow the router or accessories to come into contact with liquid or moisture at any time Do not immerse the router in any liquid Do not place o
11. TATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU No agent employee dealer retailer representative or reseller is authorized to modify or extend the terms of this Limited Warranty Version No R1 0 Edition Time June 31 2014 Contents Getting to Know Your Device eseeeeee 8 AD POARANCC isa merienenn i mies 8 Device Installation ccseecssee sees eeeeennsenenes 10 Before You Begin cccccceeeeeeeeceeeeeeeeeneeeeeneeeeneas 10 Installing the Battery and SIM Card c eeeee 10 NING C ALORS ereenn ENE EEE sean TERTE 12 Switching on Your Router assesoires 15 POWER SUPPLY araneses or erena a Ea eaS 16 About 4G LTE SIM Card sicrie 16 Accessing the Internet 2 c cesseeeeeeeeees 16 Connecting to Your DeViCe c cceecceeeeeteeeeeteeees 17 WPS Functionality issis 20 Voice FUNCOM ssiseisisrisonriressraunurindninianisansnnnins 21 Makingia Callisia nsona esane aa e 21 Answering a Call Call Forwarding reserve pneri Call Walling evcsrac cues sser smear n 24 Three Way Calling sesccavecevccceciieeeecccaiaieetes 24 Emergency Callasin isina diate 25 VOCE MAlika arcae niaidne 25 Web Portal Configuration cccccseeeeeeeeeeees 26 o a E A T 32 Network SettingS msnssuragisigdiassgen ra 32 WE
12. ally Click Update Now button to update Software update software manually NOTE Make sure you have correctly inserted the 4G LTE SIM card 41 Firewall You may setup firewall rules to protect your network from viruses worms and malicious activity on the Internet NOTE You can set the maximum to 10 filtering items for MAC IP Port Filtering URL Filtering and Port Forwarding e MACI IP Port Filtering Select Settings gt Firewall gt Port Filtering the Mac IP Port Filtering is shown in the following figure Pci tome Port Filtering Wi Fi Settings Deve Settings MACAP Pon Feng Enable Disable a EA AN e Router senings 42 Only Port Filtering is Enable then Apply the filter settings will appear Port Filtering MACAP Port Filtering Enable Disable Default Policy Accepted Dropped Default Policy Set how to handle the packet if none of the rules matches MAC IP Port Filtering Settings IP Settings IPV4 OIPY6 MAC Address g 00 1E 90 FF FF FF Source IP Address Dest IP Address Protocol ALL M Action Accept Drop Current MAC IP Port filtering rules in system MAC Address IP Type Source IPAddress Dest IP Address Protocol Source gi gt 43 gt IP Settings Select the Internet Protocol version MAC address Set the MAC address that will be filtered gt Source IP Address Set the source IP address that will be filtered gt Dest IP Address
13. an 32 characters as the name 36 for your wireless local area network WLAN Broadcast Network Name SSID Disable or Enable Default this function If Enable is selected the router broadcasts the SSID and other devices can detect and connect to it If Disable is selected the other devices cannot detect the router You can only connect to the router by manual setting AP Isolation When Enable is selected each of your wireless clients will not be able to communicate with each other When Disable is selected each of your wireless clients will be able to communicate with each other Security Mode The security modes are described below OPEN You can authenticate successfully with a SSID whether it is valid or empty WPA PSK WPA2 PSK Apply both the WPA PSK and WPA2 PSK scheme WPA2 AES PSK This is the more secure version of WPA with implementation of the 802 11i standard 37 If the authentication type is WPA2 AES PSK or WPA PSK WPA2 PSK the bottom part of the configuration page displays WPA parameters Max Station Number Set the maximum number of wireless networks connecting to the router e Advanced settings Select Settings gt Wi Fi Settings gt 2 4GHz 5 0GHz and you can set the band selection network mode channel bandwidth and etc Advanced Settings Network Mode 802 11 bigin Channel Bandwidth 20MHz x Country Region Code UNITED STATES Frequency Channel Auto x 38 e Black List Select
14. bjects on top of the router This may lead to overheating of the router The router must be placed in a ventilated environment for use Do not expose the router to direct sunlight or store it in hot areas High temperatures can shorten the life of electronic routers Do not allow children to play with the router or charger Keep the length of the cable between the router and the phone less than 10 meters The router is for indoor use only Do not use the router outside Do not connect telephone extensions which run outside of the building These can result in lightning damage to your unit 51 Cleaning and Maintaining Use an antistatic cloth to clean the router Do not use chemical or abrasive cleanser as these could damage the plastic case Turn off your router before you clean it Use the router within the temperature range of 10 C to 55 C and the storage temperature range is 20 C to 65 C The humidity range is between 5 and 95 Do not use your router during a thunderstorm Remove the main power pack from the wall socket Do not take out your 4G LTE SIM card unnecessarily The 4G LTE SIM card may be easily lost or it can be damaged by static electricity 52 Radio Frequency RF Exposure Your device contains a transmitter and a receiver When it is ON it receives and transmits RF energy When you communicate with your device the system handling your connection controls the power level at which your device t
15. e other two modes you need manually set your PC client a fixed IP address like 192 168 1 X then log in the Web Portal Configuration Page via http 192 168 1 1 to change it 28 Internet Protocol TCP IP Properties Genera Atemate Configuration Tet can Gi ais BONOA SACCA I PONE ea Sse this capability Othervase you need to ask your network administrate for the appropriate IP settings Use the following IP address IP addes Detank gateway O Unt DNS esate For Cable Broadband mode Please select PPPoE set the PPPoE parameters and then click Connect NOTE Your service provider gives you the User Name and Password 29 SE ia up Settings WAI Semngs Devce Settings WAN Connecton Mode pon PPPoE Router Semings User Name Password WAN Connection mode PPPoE poeuser sessssess Omno Connect Manual Connect Please select Static input all the parameters and then click Apply NOTE Your service provider gives you the static address information EZEN Dia up Settings WAPI Settings Deve semngs WAN Connection Mose Static Router Setings Paone Subnet Mask Detaut Gateway Primary ONS Server Secomtery ONS Sorar 0000 0000 0000 9000 0000 Please select DHCP and then click Apply 30 NOTE Your service provider does not give you any parameters Dial up Settings Soa Device Settings WAN Connecton Moce Frewat Router Setings
16. ee button Press the Hands free button again to end the call 21 Call Forwarding With Call Forwarding you can forward the calls to another phone number Immediate Call Forwarding To enable Immediate Call Forwarding e Pick up the handset and press 72 phone number Tip Enter the phone number where you want calls to be forwarded e g 721234567890 You will hear a confirmation tone Hang up your telephone or return the phone to its base To deactivate Immediate Call Forwarding e Pick up the handset and press 720 You will hear a confirmation tone Hang up your telephone or return the phone to its base Busy Call Forwarding To enable Busy Call Forwarding e Pick up the handset and press 90 phone number Tip Enter the phone number where you want calls to be forwarded e g 901234567890 You will hear a confirmation tone 22 Hang up your telephone or return the phone to its base To deactivate Busy Call Forwarding e Pick up the handset and press 900 You will hear a confirmation tone Hang up your telephone or return the phone to its base No Answer Call Forwarding To enable No Answer Call Forwarding e Pick up the handset and press 92 phone number Tip Enter the phone number where you want calls to be forwarded e g 921234567890 You will hear a confirmation tone Hang up your telephone or return the phone to its base To deactivate No Answer Cal
17. fresh the network list and select the correct SSID Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol TCP IP properties e Type the correct network key Wi Fi password when you connect to the router 59 Others Symptoms Possible Problems Solutions The voice signal indicator is always blinking or does not light This indicates poor reception Try moving the router to another location near the window About the password For the default password of the Web Portal configuration page and Wi Fi connection password please check the label on the router If you changed the password and forgot the new password you need to restore the router to the factory default settings For more assistance please Sending an E mail to devicesupport zteusa com e Visiting www zteusa com e Calling the service hotline 877 817 1759 60
18. l Forwarding e Pick up the handset and press 920 e You will hear a confirmation tone Hang up your telephone or return the phone to its base 23 Call Waiting If you subscribe the call waiting service with your local telephone service provider you will hear a beep tone if someone calls while you are already on a call Press FLASH on the handset to put your current call on hold and take the new call You can press FLASH any time to switch back and forth between calls Press the Flash key lightly to switch back to the first call e Press the Flash key again to switch between two calls Three Way Calling While on an existing call first press FLASH key then dial the second phone number when the second party answers press the Flash key again to complete the three way connection If the second party does not answer press the Flash key to end the connection and return to the first party NOTE If your phone does not have a Flash key use the off hook mechanism supported by your phone instead 24 Emergency Call When making an emergency call keep the device and phone power on and in service area Pick up the phone receiver and key in the emergency number wait for 3 seconds to send automatically Voicemail The new voicemail indicator will light up when there is a new voicemail Dial the voicemail number by the phone to listen to the voicemail following the guide prompt NOTE Before using the v
19. net you can use the default Access Point Names APNs in Auto Manual mode Select Settings gt Network Settings gt APN IPVAONS Mode Auto C Manual 1Pv4 User Name IPv4 Password Auto The device will configure automatically according to MCC MNC Manual Default You can set APN by yourself 34 Create a new APN by selecting the Manual mode then Add New E a gt Datup Stings gt Network Selection Current APN eas ode WiFi Settings Device Settings i POP Type Router Settings Protie Name IPVA APN Pv4 ONS Mode IPv4 Authentcaton Pv4 User Name Poa Password 35 Wi Fi Settings e Basic settings Select Settings gt Wi Fi Settings gt 2 4GHz 5 0GHz and the wireless network s basic parameters are shown in the following figure Network Settings 2 4GHz SSID 2 4GHz 33D Switch Enable Disable gt Black List WPS Basic Settings Device Setings aay Network Name SSID _Usce MF27EU D888 Router setings Broadcast Nemork Name SSID Enable O Disable AP Isolation Enable Disable Security Mode WPA PSKIWPA2 PSK 1 WLFIPassword sesseeee Display Password Max Staton Number 20 x panam Advanced Settings Network Mode 80211 bion Channel Bandwoth 20MHz Country Region Code UNITED STATES TOIL Frequency Channe Auto 2 4GHz SSID Switch Enable or disable 2 4GHz SSID function Network Name SSID Service Set Identifier SSID Enter a string less th
20. oicemail function please consult with your network provider to confirm that the voicemail feature has been activated The function needs network support 25 Web Portal Configuration To access Web Portal Login to the Web Portal Configuration Page 1 Launch an Internet browser and enter http 192 168 1 1 or http uscc router in the address bar The login page appears Fuscatwlar 26 2 Input the password for the default password please check the label on your router and then click Login to access the Web Portal Configuration Page Now you can customize your 4G LTE Router with Voice such as the configuration on Internet network selection password and security settings data usage etc Changing the operation mode 1 Select Change to choose the operation mode Operation Mode Bridge Cable Broadband Wireless Broadband Please remove the WAN cable when in Wireless Broadband mode NOTE If you change the operation mode the device will be restarted automatically 27 2 Set the detailed parameters for the operation mode For Bridge mode You can use Wi Fi to connect to your router and you need to connect the WAN to the LAN port via Ethernet cable and set your PC or other Wi Fi clients to obtain the IP address automatically Your clients can obtain the IP address from the WAN DHCP host and connect to the Internet directly NOTE If you want to change the operation mode to th
21. pletely before using About 4G LTE SIM Card Avoid handling the 4G LTE SIM card unnecessarily Hold the card by the edges to prevent static damage Keep the 4G LTE SIM card away from electrical and magnetic appliances If you cannot get service make sure that You are in an area which has network coverage You are using the correct 4G LTE SIM card Accessing the Internet Before accessing the Internet please make sure that the following operations are finished e Your device is connected via a network cable or Wi Fi e Your PC is configured 16 Connecting to Your Device Via Wi Fi 1 Power on your device It will take 1 2 minutes to initialize Use your Wi Fi application on the client to search for the available wireless networks Rpa Bridge Connections Disable S view Available Wireless Networks 17 3 Select the SSID of your device and then click Connect Choose a wireless network Cian ta th et blot crc arn atin ge r 1o ni a tane ot mere NOTE SSID is printed on the device label beneath the battery door 4 Input the password and then click Connect Wireless Network Connection network USCC MF27SU XXX requires a network key aleo cele a WED kay or WEA ey A naart ey bebe per urona ros peb from connecting to Network key 1 Confirm network key NOTE The password for the Wi Fi connection is on the label of your device located under the
22. ransmits Important safety information regarding radio frequency radiation RF exposure To ensure compliance with RF exposure guidelines the device must be used with a separation from the body Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits The maxim permissible exposure is defined in 47 CFR 1 1310 with 1mW cm cm The transmitter is using external antenna that operate at 20cm or more from nearby persons The maxim power density is 0 157mW cm cm The FCC grant can be found under the Display Grant section of http Awww fcc gov oet fccid after searching on FCC ID SRQ MF275U 53 FCC Compliance This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with
23. the instructions may cause harmful interference to radio communications 54 However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 55 Troubleshooting Voice Related Problems Symptoms Possible Problems Solutions e Please wait for 1 2 minutes after the router is turned on Ifthe signal LED light is blinking you have poor RF reception Change the location of the router No dial tone There is a prompt phone alert e Make sure you have announcement inserted the 4G LTE SIM as soon as lift the card correctly phone off the hook e Remove any electrical The line is noisy appliance that is too close to distorted when lift the the phone or router phone off the hook e The cable or phone set might be faulty 56 Symptoms Possible Problems Solutions hear a rapid tone as soon as lift the phone off the hook
24. to confirm your configuration To delete a virtual server Select the virtual server in the Current Virtual Servers in the system area then Click Delete e URL Filtering You can set up content filter to restrict the improper content access Select Firewall gt URL Filtering the URL Filtering is shown in the following figure ee eee URL Filtering Wi Fi Settings Device Settings URL Ee Current URL Filtering Type a URL address and then click Apply to add the URL address into the filtering list The new URL filtering item will be shown in the Current URL Filtering field To delete a URL filtering item select the URL in the Current URL Filtering area then click Delete 47 e UPnP It allows the router to advertise its UPnP capabilities Select Firewall gt UPnP select Enable UPnP Settings UPnP Settings Enable Ossadie Router Settings e DMZ You can set up a De militarized Zone DMZ to separate internal network with the Internet Select Firewall gt DMZ the DMZ setting is shown in the following figure oe ier psec ee coe DNZ Settings DMZ Settings Enable Disable IP Address 48 If you select Enable set the DMZ IP Address and then click Apply to confirm your configuration Router Settings Select Settings gt Router settings the router information is shown in the following figure panoun Router Settings WAPI Semngs Device Settings Pacoress 1 Go Subnet Mask it
25. y Strong 3 4 amp 5 bars signal Voi ae Yellow steady Weak 1 amp 2 bars signal igna Strength Blinking Roaming No service limited service Val Red steady i searching NOTE The phone function needs network support 13 Connecting to your 4G LTE Router with Voice Please refer to the following picture for connecting to your 4G LTE Router with Voice If you want to use the mobile network to connect to the Internet or use your land line phone you need to insert your 4G LTE SIM card first 14 Switching on Your Router 1 Press and hold the Power Key to get started Make sure that the power indicator is on NOTE Do not put anything on top of the router Do not lay two routers on top of each other during usage 2 Wait 1 2 minutes after turning the router on before you use the service The data network indicator should be lit on NOTE When the router is turned off an incoming caller will hear the following prompt The number you have dialed is currently unavailable Ifthe data network indicator is red blinking constantly try to move the router to another location The router takes 1 2 minutes to initialize attach to the network and obtain an IP address 15 Power Supply For normal operation connect the router to the external power adapter When there is no available external power supply the router can still work with the battery installed NOTE Please charge battery com
Download Pdf Manuals
Related Search