Home

٢٠١٣ ٤/ دﻋوة ﻟﻟﺗﻘدم ﻟﻟﻣﻧﺎﻗﺻﺔ اﻟﻌﺎﻣﺔ اﻟدوﻟﯾﺔ رﻗم

Contents

1. Evaluator 1 Evaluator 2 Annex to the tender opening report LIST OF TENDERERS REPRESENTATIVES g Declaration Name Representing g Signature if any Italian Egyptian Integrated Technical Education Cluster Date Italian Egyptian Integrated Technical Education Cluster Annex to tender opening report SUMMARY OF TENDERS Tender envelope number Tenderer s name When received Number of packages inside Within deadline Y N Tender package s duly sealed Y N Overall decision Accept Reject 10 11 12 13 14 15 Italian Egyptian Integrated Technical Education Cluster XI 1 ANNEX ADMINISTRATIVE COMPLIANCE ASSESSMENT GRID f Supply of electrical laboratory equipment Tender Tenderers Contract Title services and digital learning resources for envelope Hame the ITEC in Fayoum number Reference Document description type sa a Notes comments I tenderer identification Il contact person for this tender Ill economic and financial capacity 3 6 a IV staff resources V experience list of main references VI list of lots submitted VII tenderer s declaration Tenderer s place of establishment 3 6 b Il Representative off
2. Contracting Authority based on the technical and financial evaluation report done by the Evaluation Committee concerning the supplies of this tender will confirm the selection of the Tenderer to whom the supply contract will be awarded In this case and before the expiry of the tender validity period the Contracting Authority shall notify the Tenderer in written form that its tender resulted to be the most qualified and the chosen one for providing the supplies 20 2 Unless otherwise provided as soon as the Tenderer has provided the Performance Guarantee according to the Article 23 2 the Contracting Authority will promptly notify the other Tenderers that their tenders haven t been successful and return their Tender Guarantee to them A 21 Drawing up of the supply contract 21 1 After receiving the notice concerning the result of the tender by the Evaluation Committee the Contracting Authority shall draw up the Supply Contract which will be submitted to the Tenderer for signing 21 2 Itwill contain at least a The list of the documents forming the Supply Contract showing the order of importance of the documents b Any enclosure and derogation to the over mentioned documents duly approved c Price of the Supply Contract d Decisions made by the Contracting Authority A 22 Signing of the supply contract 22 1 Unless otherwise provided the Contractor as Supplier and the Contracting Authority as Purchaser will sign the Sup
3. 37 6 If circumstances of force majeure have occurred and continue for a period of 180 days then notwithstanding any extension of time for completion of the contract that the Contractor may by reason thereof have been granted either Party shall be entitled to serve the other with 30 days notice to terminate the contract If on the expiry of the period of 30 days the situation of force majeure still applies the contract shall be terminated and by virtue of the law governing the contract the Parties shall be released from further performance of the contract Italian Egyptian Integrated Technical Education Cluster Article 38 Death 38 1 Where the Contractor is a natural person the contract shall be automatically terminated if that person dies However the Contracting Authority shall examine any proposal made by the heirs or beneficiaries if they have notified their wish to continue the contract The decision of the Contracting Authority shall be notified to those concerned within 30 days of receipt of such proposal 38 2 Where the Contractor consists of a number of natural persons and one or more of them die a report shall be agreed between the Parties on the progress of the contract and the Contracting Authority shall decide whether to terminate or continue the contract in accordance with the undertaking given by the survivors and by the heirs or beneficiaries as the case may be 38 3 In the cases provided for in Articles 38 1 and 38
4. Certificate of Conformity at final destination and of delivery The Inspection and Monitoring activities as per Financial Protocol will be carried out by the Contracting Authority ARTICLE 10 ARBITRATION Arbitration ruling is excluded and any dispute arising from the performance or and interpretation and or execution of this contract shall be settled through the Egyptian courts ARTICLE 11 LAW and JURISDICTION The Egyptian law is governing this contract The jurisdiction for any controversy arising from the interpretation or application of this contract is the Egyptian one The contract shall be automatically terminated without prior notice if the contractors are the subject of proceedings for a declaration of bankruptcy for winding up for administration by the courts for an arrangement with creditors or for any similar procedure provided for in national legislation or regulations ARTICLE 12 CORRESPONDENCE Any written communication relating to this Contract between the Contracting Authority and the Contractor shall be in Arabic and or English and shall state the Contract title and identification number ARTICLE 13 AMICABLE SETTLEMENT OF DISPUTES The contracting parties shall make every effort to settle amicably any dispute which may arise between them The procedures applicable are set out in the Special and General Conditions ARTICLE 14 DELIVERY The delivery period shall run from the date of the Contract effectiveness A
5. Integrated Technical Education Cluster 5 X 4 Final recommendations The Evaluation Committee recommends the Contracting Authority to award the lots to the tenderers scoring first in the ranking of the offers Tender PE List of the lots i dc Tenderer s name corrected financial offer EGP Lot 1 language lab Lot 2 CAD CAE lab Lot 3 chemistry lab Lot 4 electrical residential installations Lot 5 electrical installation materials Lot 6 electrical equipment Lot 7 electronic motor drivers Lot 8 electrical industrial installations Lot 9 home building automation kit Lot 10 photovoltaic kit Lot 11 discrete electronic components Lot 12 learning resources Italian Egyptian Integrated Technical Education Cluster X 5 Signatures The members of the Evaluation Committee declare that they are not in a position of conflict of interest and will conduct the evaluation at their best knowledge and experience Evaluation Committee Name Signature Chairman Secretary Evaluator 1 Evaluator 2 Observers Organisation Name Signature Observer 1 Observer 2 Observer 3 Italian Egyptian Integrated Technical Education Cluster XI ANNEX TENDER OPENING REPORT Contract title Supply of electrical laboratory equipment services and digital
6. SN agli Syria C laian asipo Education Development Fund DD odr rl Ye VW ph Aud gall alal aliali ail 5 gen coe de pas ja IL BEDES oli YY GIU ely jal Gules dub al ada gli ga Gli essi JalSial om gl Lill anaill gazal de gite eles deja VY die uy gil Ya YW f ai Ad pall dalai Asta resi LS Aaja USI pali duialli ila cali 3 ae au is e894 Agia GAY 3 pic Vayees calli lane dio GAY dad ees CAD CAE dee aia ili og hey aed TOs ees sall Lora Y dia Call vg pie i Aaa 4a gS OLS JI Jane agin ili og hey os YO Anel LAS gl alge f O Agia GAY b pic Jepte Au Sbeag laa 1 azia Call y Ai Peyias Assi daii ilga Y Asia GY 3 pe Veyeee eua das Sl Clas sill eee A Asia Call Gy 5 pic Ya esa ipc ila di rali deja 4 Azio GY due Opera Photovoltaic Glaze deja 1 Agia CY Ai Opan dui g S GL Ss VA Asia GY 3 pe Veyees Aradeo ga VY Call Agia Yee lo sha lds ode Srall pl gialli alial gall g Ls pill iu S le Spall Lug Chi iii GAL de ga ALS Ya V V Vaal gall dati agi iuda dani eb VY Acad Va VPI VV ail gall plea WI agi Anall i ali i iala ill ag rali il sand ac gall s lethal qual ac ge Al Viel Aree Coli gall g Lag pill Aut Sg Arti day 9 Colas pally abaid GLa AA Abu AY cy gilall ore www edf edu eg As SY gi gall He dial galls Ly pill Au Sy GeV Integrated Technical Education Cluster at Fayoum Page 1 of 2 aM agli Syria C laia
7. h parameters for the calculation of the coupled amplifiers e Differential amplifier features specific characteristics of this circuit such as CMRRR differential gain etc Applications of this circuit e Amplifiers Class A gain and power efficiency e Class B single ended circuit single and double power supplies circuits push pull configuration power efficiency and cross distortion conditions e Complementary symmetry amplifiers with single and double power supply e Class C amplifiers the Q point R load Distortion of the signal Typical applications for this amplifier 11 2 4 6 Oscillator kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Classical sinusoidal phase shift oscillators RC Wien e Classical sinusoidal LC oscillators Colpitts Hartley e Classical sinusoidal oscillator the Meissner oscillator e Classical sinusoidal Quartz oscillator frequency stability according to power supply The BJT used in these oscillators e The Schmitt trigger circuit parameters VTH and VTL trigger limits commutation speed response to sinwaves square and triangle waves e Non sinusoidal oscillators the Astable multivibrators e Non sinusoidal oscillators Monostable multivibrators control circuit square weave input operation synchronization frequency output pulse duration
8. the Contracting Authority shall notify the Contractor If the Contractor fails to remedy a defect or damage within the time limit stipulated in the notification the Contracting Authority may a remedy the defect or the damage itself or employ someone else to carry out the work at the Contractor s risk and cost in which case the costs incurred by the Contracting Authority shall be deducted from monies due to or guarantees held against the Contractor or from both or b terminate the contract 31 5 In emergencies where the Contractor cannot be reached immediately or having been reached is unable to take the measures required the Contracting Authority may have the work carried out at the expense of the Contractor The Contracting Authority shall as soon as practicable inform the Contractor of the action taken 31 6 The maintenance obligations shall be stipulated in the Special Conditions and technical specifications If the duration of the warranty period is not specified it shall be 365 days The warranty period shall commence on the date of provisional acceptance and may recommence in accordance with Article 31 3 Article 32 After sales service An after sales service if required by the contract shall be provided in accordance with the details stipulated in the Special Conditions The Contractor shall undertake to carry out or have carried out the maintenance and repair of supplies and to provide a rapid supply of spare parts The S
9. Connect a lamp controlled from 3 points Assemble a system with 2 socket and a group of lamps controlled from 4 points Connect a switch controlling a socket Connect lamps controlled from various points by relay Connect a group of lamps controlled from various points by switch relay Connect a timed lighting of stairwell Connect a lamp controlled by a motion sensor Connect a lamp controlled by a light sensor Assemble and connect a fluorescent lamp Assemble and connect a lamp holder for low voltage DC lamps Technical Requirements experimental panel painted steel experimental panel with hinges to be installed in the STUDENT VERTICAL PANEL The size should be fully compatible with the vertical working positions of the a m unit Equipped with 10 or more rectangular holes for electrical embedded boxes derivations boxes required for the practical exercises rear part of the panel components connected with plastic tubes Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 11 of 48 support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panel 2 switches single phase 4 switches two phases lamp holder Philips lamp holder halogen lamp lamp holder low voltage halogen lamp one way switches t
10. Core i7 2600 8MB Cache Memory RAM 8GB DDR3 1333MHz SDRAM Hard Drive 1 5 TB 7200rpm SATA hard drive Graphics 2GB DDR3 graphic card HDMI DVI VGA via adapter Optical drive Blu ray writer amp SuperMulti DVD burner Audios 5 1 audio board line in line out mic in mic out Networking Ethernet card 10 100 1000 Mbps Inputs Keyboard English and Arabic layout optical mouse 3 buttons Ports USB2 0 USB3 0 15 in 1 memory card reader Cooling system to operate in ambient temperature up to 45 Celsius Operating System Windows 7 Professional Linux OSX Preinstalled software Internet Security Suite 30 W 2 ways and Subwoofer loudspeakers system 10 meters cables Burglar alarm anti theft system Monitors LCD 27 Minimum Requirements e Colour LCD display 27 LED e Resolution 1920x1080 native e Proportion 16 9 Interactive whiteboard with projector and software Modern learning device for the use of digital resources Minimum Requirements whiteboard e Compatible with dry erase markers and easily cleanable e Digital pens and eraser Minimum Requirements projector e Diagonal size 65 e Wall mount bracket included and completed with support for projector e Projector resolution 1024x768 e Video compatibility NTSC PAL and SECAM e Image synchronization Auto e Input output interface HDMI Composite S video VESA RGB e Remote control e e M Connection cables Burglar alarm ant
11. See Annex C General Requirements e The KITs for practical exercises must be compatible with the vertical benches in the PLC and Automation LAB Lot 09 or installed in a suitable vertical structure to be positioned and fixed on the benches e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical Domestic Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD SO OSX and or Linux and or Windows in English and or Italian and or Arabic in three copies 4 hours demo to teachers demonstrating most of the functionalities of the equipment o ooo 10 1 Qty KITS for PRACTICAL EXERCISE General Requirements for each kit 7 Box with equipment to carry out the practical exercises 8 Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered 9 Vertical panel to wire practical exercises 10 Commercial datasheet for each component and material included in the box 11 List of practical exercises title and description that can be carried out 12 Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exer
12. as above listed sufficient for the Tender compilation and for the successive widening of the requested supply in respect of each prescription described in those documents e we accept the delivery and payment terms indicated in the Special Conditions e our prices include everything indicated in the Tender Documents consequently our offer includes also what is not expressly described in the Tender Documents but will result necessary to have a complete supply We agree to abide by the ethics clauses in Article 26 of the Instructions to Tenderers and in particular have no conflict of interests or any equivalent relation in that respect with other Tenderers or other parties in the tender procedure at the time of the submission of this application We will inform the Contracting Authority immediately if there is any change in the above circumstances at any stage during the implementation of the tasks We also fully recognise and accept that any inaccurate or incomplete information deliberately provided in this application may result in our exclusion from this and other contracts funded by EDF We authorise the Contracting Authority to request information about the references provided to the person appointed in Annex VII 2 We note that the Contracting Authority is not bound to proceed with this invitation to tender and that it reserves the right to award only part of the contract or to cancel the tender procedure It will incur no liabilit
13. contract contract Permanent Other staff Total VII 5 Experience Please complete a table using the format below to summarise the major relevant supplies carried out in the course of the past 3 years by the legal entity making this tender The number of references to be provided must not exceed 15 for the entire tender Ref ___ Project title e Overall supply value EUR e Country of delivery e Client legal entity e Contact person at the client e Detailed description of supply max 300 words e Detailed description of services provided max 200 words Italian Egyptian Integrated Technical Education Cluster VII 6 Lots submitted In response to your letter of invitation to tender for the above contract we submit our offer for the following lots List of the lots Lots offered Lot 1 language lab Lot 2 CAD CAE lab Lot 3 chemistry lab Lot 4 electrical residential installations Lot 5 electrical installation materials Lot 6 electrical equipment Lot 7 electronic motor drivers Lot 8 electrical industrial installations Lot 9 home building automation kit Lot 10 photovoltaic kit Lot 11 discrete electronic components Lot 12 learning resources insert the sentence not offered for the lots not offered by the tenderer insert YES for the lots offered by the tenderer Italian Egyptian Integrated Technical Education Clus
14. envelopes of any tender have been opened the unopened and sealed envelopes will be returned to the Tenderers 27 2 a Cancellation may occur when the tender procedure has been unsuccessful i e no qualitatively or financially worthwhile tender has been received or there is no response at all the economic or technical data of the project have been fundamentally altered exceptional circumstances or force majeure render normal performance of the contract impossible all technically compliant tenders exceed the financial resources available there have been irregularities in the procedure in particular where these have prevented fair competition After cancelling a tender procedure the Contracting Authority may decide to launch a new tender procedure to open negotiations with one or more Tenderers who comply with the selection criteria and have submitted technically compliant tenders provided that the original terms of the contract have not been substantially altered not to award the contract Whatever the case the final decision is taken by the Contracting Authority Italian Egyptian Integrated Technical Education Cluster SIE gpl gigi eall pa Bsn Education Development Fund al nasviluppo A Gude auld B GENERAL CONDITIONS datati Jeg p ll Reference Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt f
15. il potenziale e la capacit la corrente elettrica la conduzione elettrica il magnetismo l induzione elettromagnetica le onde elettromagnetiche 12 1 4 Italian language for foreigners Digital Learning Resources Topics covered e la fonetica l ortografia il nome l articolo l aggettivo Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 39 of 48 il pronome il verbo l avverbio la preposizione la congiunzione la proposizione i complementi il periodo le proposizioni sostantive le proposizioni relative le proposizioni complementari indirette leggere scrivere parlare in un contesto lavorativo la formazione delle parole lessico di base lessico tecnico 12 1 5 Italian literature Digital Learning Resources Topics covered Carry out not less than 50 of the following examples of topics Verga La lupa Vita dei campi Verga Libert Novelle rusticane Verga Prefazione a I Malavoglia Verga Il naufragio della Provvidenza I Malavoglia Verga La morte di mastro don Gesualdo Mastro don Gesualdo V 4 Pirandello Il sentimento del contrario L umorismo II Pirandello La carriola Novelle per un anno Pirandello Nel limbo della vita Il fu Mattia Pascal XVIII Pirandello Mattia Pascal cambia nome Il fu Mattia Pascal Pirandello L ingresso dei personaggi Sei personag
16. or c suspends the delivery of the supplies or any part thereof for more than 180 days for reasons not specified in the contract or not attributable to the Contractor 36 3 Termination shall be without prejudice to any other rights or powers under the Italian Egyptian Integrated Technical Education Cluster contract of the Contracting Authority and the Contractor 36 4 In the event of such termination the Contracting Authority shall pay the Contractor for any loss or damage the Contractor may have suffered Article 37 Force majeure 37 1 Neither Party shall be considered to be in default or in breach of its obligations under the contract if the performance of such obligations is prevented by any event of force majeure arising after the date of notification of award or the date when the contract becomes effective whichever is the earlier 37 2 For the purposes of this Article the term force majeure means acts of God strikes lock outs or other industrial disturbances acts of the public enemy wars whether declared or not blockades insurrection riots epidemics landslides earthquakes storms lightning floods washouts civil disturbances explosions and any other similar unforeseeable events which are beyond the Parties control and cannot be overcome by due diligence 37 3 Notwithstanding the provisions of Articles 21 and 35 the Contractor shall not be liable to forfeiture of his performance guarantee liquidated dama
17. tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico 12 2 8 20 ELECTRONICS copies Tonics covered each Carry out not less than 50 of the following examples of topics Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe dell istituto professionale tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico 12 2 9 20 MECHANICS copies Tonics covered each Carry out not less than 50 of the following examples of topics e Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe dell istituto professionale tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 44 of 48 Annexes Annex A TEACHER PC and SMART BOARD Desktop computer Minimum Requirements Processor Second generation Intel
18. 180Hx60Wx95L cm Lockable Heavy duty type Sliding door 4 2 Qty KITS FOR PRACTICAL EXERCISE General Requirements for each kit e Box with equipment to carry out the practical exercises vertical interchangeable panel Commercial datasheet for each component and material included in the box List of practical exercises title and description that can be carried out with the kit Documentation in Arabic and or Italian and or English for each practical exercise including Safety recommendations during the preparation and execution of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit 4 2 1 12 Electrical protective measures kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises the RCB types and applications the thermomagnetic switches types and applications fuses types and applications overvoltage protection devices Energy counter installation contact voltage in different situations Technical Requirements experimental panel painted steel expe
19. 2 CAD CAE lab 60 calendar days Lot 3 Chemistry lab 120 calendar days Lot 4 Electrical residential installations 60 calendar days Lot 5 Electrical installation materials 60 calendar days Lot 6 Electrical equipment 120 calendar days Lot 7 Electronic motor drivers 120 calendar days Lot 8 Electrical industrial installations 120 calendar days Lot 9 Home building automation kit 120 calendar days Lot 10 Photovoltaic kit 120 calendar days Lot 11 Discrete electronic components 120 calendar days Lot 12 Learning resources 120 calendar days calendar days from the signing of the contract insert the sentence not offered for the lots not offered by the tenderer Date lt gg mm 2012 gt Signature lt name of the Tenderer s representative gt Stamp of the Tenderer Italian Egyptian Integrated Technical Education Cluster III ANNEX PERFORMANCE BANK GUARANTEE FORMAT lt To be completed on letterhead paper of the financial institution gt For the attention of Education Development Fund 13 Haroun St Dokki Giza Egypt referred to below as the Contracting Authority Subject Guarantee No Performance Guarantee for the full and proper execution of the contract Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian De
20. 2 persons offering to continue to perform the contract shall notify the Contracting Authority thereof within 15 days of the date of decease 38 4 Such persons shall be jointly and severally liable for the proper performance of the contract to the same extent as the original Contractor Continuation of the contract shall be subject to the rules relating to establishment of the guarantee provided for in Article 11 DISPUTE SETTLEMENT Article 39 Amicable dispute settlement The Parties shall make every effort to settle amicably any dispute which may arise between them Once a dispute has arisen the Parties shall notify each other in writing of their positions on the dispute and any solution which they consider possible If either Party deems it useful the Parties shall meet try and settle the dispute A Party shall respond to a request for amicable settlement within 30 days of such a request The maximum period laid down for reaching such a settlement shall be 120 days from the commencement of the procedure Should the attempt to reach an amicable settlement fail or a Party fail to respond in time to requests for a settlement either Party shall be free to proceed to the next stage of the dispute settlement procedure by notifying the other Article 40 Dispute settlement by litigation If no settlement is reached within 120 days of the start of the amicable dispute settlement procedure each Party may seek a ruling from a national court in
21. 2 Without the Contracting Authority s prior written authorization a Supplier and its staff or any other company with which the Supplier is associated or linked may not even on an ancillary or subcontracting basis supply other services carry out work or supply equipment for the project This prohibition also applies to any other projects that could by the nature of the contract give rise to a conflict of interest on the part of the Supplier 26 3 When putting forward a candidacy or tender the candidate or Tenderer must declare that he is not in a situation affected by potential conflict of interest and that it has no particular link with other Tenderers or parties involved in the project Should such a situation arise during performance of the contract the Supplier must immediately inform the Contracting Authority 26 4 The Supplier must at all time act honourably and impartially in accordance with the code of conduct of its profession It must refrain from making public statements Italian Egyptian Integrated Technical Education Cluster about the project or services without the Contracting Authority s prior approval It may not commit the Contracting Authority in any way without its prior written consent 26 5 For the duration of the contract the Supplier and its staff must respect human rights and undertake not to violate the political cultural and religious mores of the recipient state 26 6 The Supplier shall not accept an
22. 9 2 The Contractor shall comply with administrative orders given by the Contracting Authority Where the Contractor considers that the requirement of an administrative order goes beyond the scope of the contract he shall facing a contract s breach notify the Contracting Authority thereof giving his reasons within thirty 30 days of receipt of the order Execution of the administrative order shall not be suspended because of this notice 9 3 The Contractor shall follow and respect all laws and regulations in force in the State of the Contracting Authority as stipulated in Article 2 and shall ensure that his personnel their dependants and his local employees also respect and attend by all such laws and regulations The Contractor shall indemnify the Contracting Authority against any claims and proceedings arising from any infringement by the Contractor his employees and their dependants of such laws and regulations 9 4 The Contractor shall treat all documents and information received in connection with the contract as private and confidential He shall not save in so far as may be necessary for the purposes of the contract s execution publish or disclose any particulars of the contract without the prior consent in writing of the Contracting Authority If any disagreement arises as to the necessity for any publication or disclosure for the purpose of the contract the decision of the Contracting Authority shall be final 9 5 If the Contract
23. Domestic Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment 8 1 Qty WORKBENCHS 8 1 1 6 Student vertical workbench The unit should be the support and should include boards panels and tools common to all the educational kits to develop a set of practical exercises referred to the following subjects e practical exercises to practice with contactors e practical exercises to practice with cabinets for industrial applications Technical requirements Structure e to be built in structural steel and welded sheet steel e the work plane made of strong chipboard covered with plastic laminate e the upright frame will support vertical interchangeable exercise panels boards e should accommodate on the same side two students working at the same time ensuring comfortable and safe operations with No 2 metal drawers key locked per position total 4 drawers per bench e the student workbench can be positioned against a wall Technical requirements Electrical e 1 AC main line 3 x 230 or 3 x 400 V 16 A and 230 V single phase line 16 A with MCB RCB 30 mA sensitivity and 4 mm safety terminals This main line should include EPB Emergency Push Button with mechanical lock
24. Education Cluster Article 20 After ssales SErViCG vee eee ER EEN Bs NI 7 Article 21 Final ACCODtAN Ce isinsi eiere eei rea epe EAEE EE EREE eben 7 Article 22 Amicable settlement of disputes 7 Article 23 Dispute settlement by legal action 2 cece cette ee eeeeeeneeeeeeeeetteeee 8 Article1 Applicable Law For all matters not covered by the provisions of the contract the jurisdiction for any controversy arising from the interpretation or application of this contract is the Egyptian one Article2 Assignment The Contractor may not assign the contract or any part thereof or any benefit or interest Article3 Subcontracting The Contractor may not subcontract any part of the contract Article4 Assistance with local regulation The Contracting Authority will make every effort possible to help the Contractor obtaining visas and permits required but not the residence permits for their families In any case the responsibility sits in the hand of the Contractor Article5 General obligations The Contractor can be in the form an alliance with one or more companies operating in the scope of work of this tender as per the provision of article 3 4 of the Instructions to Tenderers and 9 5 of the General Conditions Article 6 Origin In case that some items are not available with the origin required in the General Condition the Contractor can replace with items of different origin In such case the Contractor sh
25. SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 6 of 48 3 1 5 2 Double door storage unit fire resistant Double door storage unit for dangerous chemicals Minimum Requirements e Dimension about 180Hx60Wx95L cm e Lockable e Heavy duty type e Tempered transparent glass doors safety glasses 3 1 6 4 Double door storage unit Double door storage unit of experimental kits Minimum Requirements e Dimension about 180Hx60Wx95L cm e Lockable e Heavy duty type e Tempered transparent glass doors safety glasses 3 2 Qty KITS for PRACTICAL EXERCISE in CHEMISTRY General Requirements for each kit 1 Box with equipment to carry out the practical exercises 2 Box with materials and components consumable to carry out a minimum of 30 times the practical exercises of the kit 3 List of practical exercises title and description that can be carried out 4 Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 3 2 1 12 Education Kit for Inorganic Chemistry Minimum Requirements Carry out not less than 50 of th
26. agree on payment in instalments Bank charges incurred by the repayment of amounts due to the Contracting Authority shall be borne entirely by the Contractor Article27 Delayed payments 27 1 The Contracting Authority shall pay the Contractor the sums due within forty five 45 days of the date on which an admissible payment is registered in accordance with Article 26 of these General Conditions This period shall begin to run from the approval of these documents by the competent department referred to in Article 26 of the Special Conditions These documents shall be approved either expressly or tacitly in the absence of any written reaction in the forty five 45 days following their receipt accompanied by the requisite documents 27 2 Once the deadline laid down in Article 27 1 has expired the Contractor may within two 2 months of late payment claim late payment interest at the rediscount rate applied by the issuing institution of the country of the Contracting Authority where payments are in national currency The late payment interest shall apply to the time that elapses between the date of the payment deadline exclusive and the date on which the Contracting Authority s account is debited inclusive 27 3 Any default in payment of more than ninety 90 days from the expiry of the period laid down in Article 27 1 shall entitle the Contractor to terminate it with thirty 30 days prior notice to the Contracting Authority ACCEPTAN
27. and 4 turn to unlock key switch and min voltage coil protection e 1 AC low voltage line 12 24 V 4 A single phase line overload and short circuit protection e 1 DC voltage line 12 0 12 VDC 2 A e Operating and maintenance manuals Technical requirements TRMS Digital multimeter 22000 counts Auto Manual Ranging 46 segments analogue bar True RMS measures DC voltage 220 mV to 1000 V AC Voltage 220 mV to 750 V DC Current 220 microA to 10 A AC Current 220 microA to 10 A Fuse protection Resistance 220 ohm to 220 Mohn 7 ranges Capacitance 25 nF to 220 mF Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 26 of 48 e Frequency 10 Hz to 220 MHz e Special Functions diode test Continuity Temperature Duty Cycle Transistor hFE test Data Hold Peak Hold RS 232C Stool for Students ae se Ergonomic and comfortable stool without arms and according to the height of the benches Minimum Requirements Rigid without rotation wheels and adjustable elements Heavy duty strong and secure construction 8 1 3 4 Sliding door storage unit Sliding door storage unit of coordinated design with the workbench to accommodate panels with practical exercises under completion Minimum Requirements e Dimension about 180Hx60Wx95L cm e Lockable e Heavy duty type e Sliding door 8 2 Qty KITS for PRACTIC
28. and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet e Online e catalogue of electrical products and materials with updates Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 10 2 1 1 Renewable Energy Systems evolution dimensioning computing Minimum Requirements e Selection of the technology according to the needs e Dimension a photovoltaic system e Installation and positioning of a photovoltaic system Digital resources in Renewable Energy System for technical and professional schools Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 33 of 48 Lot 11 DISCRETE ELECTONIC COMPONENTS General Requirements e Manuals guidelines technical documentation demos and tutorials in digital format CD or DVD SO OSX and or Linux and or Windows O O o in English and or Italian and or Arabic o in three copies o 4hours demo to teachers demonstrating most of the functionalities of the equipment 11 1 Qty WORKBENCHS 11 1 1 6 __ Student vertical workbench The unit should be the support and should include boards panels and tools common to all the educational kits to develop a set of practical exercises referred to the following subjects e practical exercises i
29. any Tenderers otherwise delete the entire paragraph included the table Italian Egyptian Integrated Technical Education Cluster On the basis of the Evaluation the Committee decided that the following tenders did not reach the minimum threshold score and should not be considered further Tender envelope Tenderer s name Reason No X 3 5 Financial evaluation The Evaluation Committee checked the technically compliant tenders for arithmetic errors If any arithmetic errors were found As stated in the Instructions to Tenderers arithmetic errors were corrected on the following basis e Where there was a discrepancy between amounts in figures and in words the amount in words prevailed e Where there was a discrepancy between a unit price and the total amount derived from arithmetic calculation the maximum value prevails except where the Evaluation Committee agreed that there was an obvious error in which case the total amount as quoted prevails The following arithmetic corrections were made Tender Stated Arithmetically n corrected envelope Tenderer s name Lot No and name financial offer i financial offer No EGP EGP The arithmetically corrected financial offers were compared to identify the technically Italian Egyptian Integrated Technical Education Cluster compliant tender with the lowest price The tender submitted by lt Tende
30. circumstance that after a new testing defects faults or imperfections are pointed out even if successfully tested in a previous assessment such materials or items to be supplied or to be used for manufacturing other equipment can be refused and shall be immediately replaced by the Contractor The Contractor might be given the possibility to repair or replace the refused materials or items and on their turn they might be used for other supplies only in case the Technical Committee decides they have been repaired or replaced in a satisfactory way Article 25 Inspection and testing 25 1 The Contractor shall ensure that the supplies are delivered to the testing place in time in order to allow to the Technical Committee to perform the test 25 2 By means of the Technical Committee the Contracting Authority has the right to control examine and check periodically items used materials and execution as well as to control the going on of planning manufacturing or assembly of what has been planned manufactured or assembled for delivery according to the Supply Contract Such control aims to check whether quality and quantity of items and used materials are those required by the Supply Contract The above mentioned operations can be carried out at the planning manufacturing or assembly site or at the testing site or elsewhere provided it is stated in the Supply Contract 25 3 With reference to the above mentioned inspection and testing the Contra
31. dell istituto professionale tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 43 of 48 12 2 6 20 MATHEMATICS copies Tonics covered each Carry out not less than 50 of the following examples of topics e Libro di testo con esercizi per la 1 classe della media inferiore Libro di testo con esercizi per la 2 classe della media inferiore Libro di testo con esercizi per la 3 classe della media inferiore Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe dell istituto professionale tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico 12 2 7 20 ELECTROTECNICS copies Topics covered each Carry out not less than 50 of the following examples of topics e Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe dell istituto professionale
32. digital resources title and description e Online e catalogue of electrical products and materials with updates e Documentation in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 7 3 1 1 Electrical machines principles and measures Minimum Requirements Carry out not less than 50 of the following topics e Basic principles of electrical machines static and rotating Different motor types AC and DC Mechanical principles Electrical principles Parallel connection of generators Single phase and three phase AC motor Load characteristics Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 25 of 48 ITEM Qty 7 DESCRIPTION AND REQUIREMENTS Lot 8 ELECTRICAL INDUSTRIAL INSTALLATIONS e Dimensions of the Electrical Industrial Installation Workshop are about 12m w x 11 5m I layout can be requested to the contracting authority e Computer for the teacher and intelligent board will be provided by the Contracting Authority see Annex A General Requirements e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical
33. e Non sinusoidal oscillators the Bistable multivibrator control circuit maximum commutation frequency etc 11 2 5 6 Semiconductor kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Semiconductors theory the PN junction and the diode e The junction direct and inverse polarization e The avalanche and the Zener phenomena e Semiconductors Devices and its characteristics o diodes diodes inverse and direct current related to the applied voltages other diodes parameters o UJT transistors Zener diodes PUT SCR DIAC and TRIAC o The V I curves of the semiconductors plus the control 8rd Contact as a parameter e Specific applications circuits using these devices o Rectifying circuits half and full wave rectifiers with central transformer tap the Graetz circuit Ripple filters the L and the PI configurations using R C L components The voltage doubler The clipper and clamping circuits UJT as waves generator Voltage stabilization by using Zener diodes o ooo 11 2 6 6 Transistors kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e BJT Transistors NPN and PNP types e Basic BJT equations e The Q point bias and st
34. has suffered The Contractor shall forfeit this right unless he exercises it within thirty 30 days of the expiry of the ninety 90 day period Article 19 Period of execution of tasks 19 1 The period of execution of tasks shall commence on the date fixed in accordance with Article 18 and shall be as stated in the contract without prejudice to extensions of the period which may be granted under Article 20 19 2 If provision is made for separate periods of performance for separate lots such periods shall not be aggregated in cases where one Contractor is allocated more than one lot Article 20 Extension of period of execution 20 1 The Contractor may request an extension to the period of execution if his performance of the contract is delayed or expected to be delayed for any of the Italian Egyptian Integrated Technical Education Cluster following reasons a extra or additional supplies ordered by the Contracting Authority b exceptional weather conditions in the country of the Contracting Authority which may affect installation or erection of the supplies c physical obstructions or conditions which may affect delivery of the supplies which could not reasonably have been foreseen by a competent contractor d administrative orders affecting the date of completion other than those arising from the Contractor s default e failure of the Contracting Authority to fulfil its obligations under the contract f any suspension of
35. in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models e Teaching support software to be used on smart boards with projector Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 47 of 48 GRAFCET language Digital resources in GRAFCET Language for technical and professional schools Minimum Requirements Set of 24 licenses Differences between various modes of programming a PLC Configuring a GRAFCET Graphic representation of the language elements Graphic representation of sequential structures Case studies PLC Programming Digital resources in PLC Programming for technical and professional schools Minimum Requirements Set of 24 licenses Programmable logic controllers Project organization Programming languages in accordance with IEC 61131 Link orientated programming languages Sequential function chart Structured text Sequence programming project Sensors Digital resources in Sensors for technical and professional schools covering Minimum Requirements Set of 24 licenses Simple motion control encoder on cylinders Use of pressure sensors to improve safety in pneumatic systems Use of flow sensors to improve safety output signals from sensors Technology of NO NC connection Switching
36. in favour of the Agent Bank The official date of entering into force of the contract will be the date of notification of the letter of Credit by the Agent Bank to the Contractor s bank ARTICLE 7 CARRIERS TRANSPORT Transport may be carried out combined by sea railway and road To be noticed that the ship used to transport to Egypt the goods object of this Supply Contract must be Italian or Egyptian namely must fly Italian or Egyptian flag only ARTICLE 8 ACCEPTANCE AND TAKING OVER OF THE GOODS 8 1 The commodities are delivered and therefore at the date of the issuing of the Certificate of Conformity at final destination and of delivery by the Contracting Authority 8 2 Starting from the date of the Certificate of Conformity at final destination and of delivery the warranty period of 36 months will start ARTICLE 9 MONITORING AND INSPECTIONS The inspections and monitoring activities will be carried out by the Contracting Authority as follows 9 1 Quantity and quality inspection of the commodities i e verification of the number of pallets inspection of the packing certification concerning shipping at the Contractor s factory loading and discharging port 9 2 For the operations mentioned in this article point 9 1 the following certificates shall Italian Egyptian Integrated Technical Education Cluster be issued from the Technical Committee Certificate of Conformity at loading Certificate of Discharge
37. into account everything which is required for the full and proper performance of the contract and to have included in his rates and prices all costs related to the supplies in particular a the costs of transport the costs of handling packing loading unloading transit delivery unpacking checking insurance and other administrative costs in connection with the supplies The packaging shall be the property of the Contracting Authority unless otherwise provided in the Special Conditions C the cost of documents relating to the supplies where such documents are required by the Contracting Authority d performance and supervision of on site assembly and or commissioning of the delivered supplies e furnishing of tools required for assembly and or maintenance of the delivered supplies f furnishing of detailed operation and maintenance manuals for each unit of the delivered supplies as specified in the contract g supervision or maintenance and or repair of the supplies for a period of time stated in the contract with the stipulation that this service shall not release the Contractor from any warranty obligations under the contract Italian Egyptian Integrated Technical Education Cluster h training of the Contracting Authority s personnel at the Contractor s factory and or elsewhere as specified in the contract 15 2 Since the Contractor is deemed to have determined his prices based on his own calculations operation
38. kit should include an industrial type DC motor of about 500W with separate windings and connections for armature and field and with coil thermal protection and its driver Easy mechanical coupling with tachogenerators Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Explore electrical features of the DC motor Explore mechanical features of the DC motor Explore the functioning of a DC motor drive Explore the functioning of a current loops in a AC DC converter Explore the functioning of a control and power circuits ina 2Q AC DC converter Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 24 of 48 e Explore the functioning of a control and power circuits in a 4Q AC DC converter 7 2 6 3 AC AC inverters with 3 phases asynchronous motor kit about 0 5 kW The kit should include an industrial type AC induction motor of about 500W with star delta connections and with coil thermal protection and its driver Easy mechanical coupling with tachogenerators Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Explore electrical features of the AC motor e Explore mechanical features of the AC motor e Explore the functioning of an AC motor drive e Explore the functioning of a V Hz scalar drive e Explore the functioning of a 220V start configura
39. learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program Annexes List of Tenderers representatives Summary of tenders received 1 Timetable Date Time Venue Publication of procurement notice Deadline for submission of tenders Tender opening session 2 Observers Name Representing 3 Minutes The tender opening session was based on the register of tenders received which was prepared using the information on the envelopes Each tender envelope had been given a sequential number by the Contracting Authority upon receipt The Chairperson and Secretary completed the attached Summary of tenders received during the tender opening session Only tenders contained in envelopes received by the deadline for submission of tenders were opened The following Tenderers withdrew their tenders Tender envelope Tenderer s name Reason if known number Italian Egyptian Integrated Technical Education Cluster The tender envelope number was marked on all copies of the tenders The Chairperson and the Secretary write their initials in the front page of each original 4 Conclusion The following tenders were considered to be suitable for further evaluation Tender envelope number Tenderer s name 5 Signatures Name Signature Chairman Secretary
40. meetings will be published on the official board in the same way the Tender Documents have been distributed A 3 Participation 3 1 Participation is open on equal terms to all legal and natural persons The applicable law for the purpose of this tender is the Egyptian one 3 2 The participants must have a representative office or a central administration or a principal place of business in Egypt Tenderers must provide evidence of their status 3 3 The participants must be registered at a Chamber of Commerce in their country of origin They must be duly authorized to perform the commercial activities related to the supply for which the tenders are submitted 3 4 A local agent can form an alliance with one or more companies operating in the scope of work of this tender and whom he acts as a local representative The local agent must provide proof that the company s forming the alliance are operating in fields provided in this tender However Alliances formed form companies competing in this tender will not be accepted by the Contracting Authority 3 5 Natural or legal persons are not entitled to participate to competitive tendering or to be awarded contracts if a They are bankrupt or being wound up or are having their affairs administered by the courts or have entered into an arrangement with creditors or have suspended their business activities or are in any analogous situation arising from a similar procedure provided for in nat
41. or contracts terminated if it emerges that the award or execution of a contract has given rise to unusual commercial expense Such unusual commercial expense are commissions not mentioned in the main contract or not stemming from a properly concluded contract referring to the main contract commissions not paid in return for any actual and legitimate service commission paid to a place with a favourable tax and bank secrecy policy commissions paid to a recipient who is not clearly identified commissions paid to a company which has every appearance of being a front company 26 12 The Supplier undertakes to supply the Contracting Authority with supporting evidence regarding the conditions in which the contract is being executed The Contracting Authority may carry out whatever documentary or on the spot checks it deems necessary to find evidence in cases of suspected unusual commercial expenses 26 13 Failure to comply with one or more of the ethics clauses may result in the exclusion of the candidate Tenderer or Supplier from other contracts by the Contracting Authority and in penalties The individual or company in question must be informed of the fact in written form Italian Egyptian Integrated Technical Education Cluster A 27 Cancellation of the tender procedure 27 1 In the event of cancellation of the tender procedure the Contracting Authority will notify Tenderers of the cancellation If the tender procedure is cancelled before
42. practical exercises to study other classical power semiconductors e practical exercises to study the PWM technique to control the power devices Technical requirements Structure e tobe built in structural steel and welded sheet steel e the work plane made of strong chipboard covered with plastic laminate e the upright frame will support vertical interchangeable exercise panels boards e should accommodate on the same side two students working at the same time ensuring comfortable and safe operations with No 2 metal drawers key locked per position total 4 drawers per bench e the student workbench can be positioned against a wall Technical requirements Electrical e AC main line 3 x 230 or 3 x 400 V 25 A and 230 V single phase line 25 A with MCB RCB 30 mA sensitivity and 4 mm safety terminals This main line should include EPB Emergency Push Button with mechanical lock and 4 turn to unlock key switch and min voltage coil protection AC output single phase 400V 10A AC variable output single phase 0 400V 5A DC output 600V 10A DC variable output 0 600V 10A Operating and maintenance manuals Technical requirements TRMS Digital multimeter e 22000 counts e __Auto Manual Ranging Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 22 of 48 46 segments analogue bar True RMS measures DC voltage 220 mV
43. the expiry of the contractual period and the actual date of completion to liquidated damages equal to 5 1000 of the value of the undelivered supplies to a maximum of fifteen percent 15 of the total value of the contract 21 2 If the non delivery of any of the goods prevents the normal use of the supplies as a whole the liquidated damages provided for in paragraph 21 1 shall be calculated based on the total contract value 21 3 If the Contracting Authority has become entitled to claim at least fifteen percent 15 of the contract value it may after giving written notice to the Contractor a seize the performance guarantee Italian Egyptian Integrated Technical Education Cluster b terminate the contract in which case the Contractor will have no right to compensation and c enter into a contract with a third party for the provision of the balance of the supplies The Contractor shall not be paid for this part of the contract The Contractor shall also be liable for the additional costs and damages caused by his failure Article 22 Alterations 22 1 The Contracting Authority reserves the right at the time of contracting to alter the quantities as stated in the Special Conditions As a result of the alteration the total value of the supplies per lot may not rise or fall in the quantities by more than twenty five per cent 25 of the contract price The unit prices used in the tender shall be applicable to the quantities pr
44. the Contracting Authority premises will test the supply at the presence of the qualified personnel appointed by the Contracting Authority The Contracting Authority after checking the correct performance of the goods as specified in the tender terms will issue the Certificate of Provisional Acceptance Starting from the date of such Certificate the Warranty Period of 36 months will start Article 19 Warranty 19 1 The supplies must have a full technical warranty for a period of 36 thirty six Italian Egyptian Integrated Technical Education Cluster months from the date of the Certificate of Provisional Acceptance issued by the Contracting Authority 19 2 The Supplier shall warrant that the supplies are new unused of the most recent models and incorporate all recent improvements in design and materials The Supplier shall further warrant that all commodities have no defects arising from design materials or manufactory Article 20 After sales service 20 1 The Tenderer if he does not already have one shall appoint a local Agent and Service Centre in Egypt for post sale assistance and availability of consumables spare parts materials and will provide their name and address informing also about Their experience organization and reliability to carry out the post sale assistance Post sale assistance s intervention time Spare part s availability time 20 2 If a local Agent or Service Centre in Egypt in ch
45. the Contractor that the payment request cannot be fulfilled because the sum is not due because appropriate substantiating documents have not been provided or because there is evidence that the expenditure might not be eligible In the latter case an inspection may be carried out on the spot for the purpose of further checks The Contractor shall provide clarifications modifications or further information within thirty 30 days of being asked to do so The payment period shall continue to run from the date on which a properly drawn up payment request is registered Italian Egyptian Integrated Technical Education Cluster 26 5 The Supplier shall have the right to receive and advance payment if desired In such circumstance the payments shall be made as follows a Twenty five percent 25 of the contract price after the signing of the contract against provision of the performance guarantee and a security guaranteeing repayment in full of this pre financing b Sixty five percent 65 of the contract price following provisional acceptance of the supplies c Ten percent 10 of the contract price as payment of the balance outstanding following final acceptance of the supplies However this payment of ten percent 10 may if the Contractor so wishes be made at the same time as the sixty five percent 65 instalment referred to in paragraph 26 5 b if the Contractor provides a security guaranteeing repayment of the full amount of the
46. the delivery and or installation of the supplies which is not due to the Contractor s default 9 force majeure h any other causes referred to in these General Conditions which are not due to the Contractor s default 20 2 Within fifteen 15 days from the moment he realizes that a delay might occur the Contractor shall notify the Contracting Authority of his intention to make a request of extension of the contract s period to which he considers himself entitled Except when otherwise agreed between the Contractor and the Contracting Authority the Contractor within thirty 30 days provides the Contracting Authority with comprehensive details so that the request can be examined 20 3 Within thirty 30 days the Contracting Authority shall grant by written notice after due consultation if appropriate the Contractor with the extension of the performance period if needed with retroactive effect or inform the Contractor that he is not entitled to an extension Elapsed the above mentioned term the silence of the Contracting Authority shall be interpreted as denial Article 21 Delays in execution 21 1 If the Contractor fails under his own responsibility to deliver any or all of the goods or perform the services within the time limit s specified in the contract the Contracting Authority shall be entitled without formal notice and without prejudice to other remedies under the contract and for every day which shall elapse between
47. the requirements stated in the Technical Specifications Annex E and assess the number and type of practical exercises offered by the tenderer The tenderer should include the documentation instruction for teachers and students assessment grid background theory pictures guidelines manufacturers manuals etc associated to one of the practical exercises offered as an example of typical documentation of practical exercises e the Annex XI 5 Digital Learning Resources Evaluation grid and all the documents and the information required to comply with the requirements stated in the Technical Specifications Annex E and assess the language and the content of the Resources offered by the tenderer The tenderer should include an example of digital resource as a typical resource offered and the complete list of similar digital resources offered The tenderer at his discretion can add other examples in order to provide a better view of the resources that can be provided with this tender A demo will be highly appreciated e a CD with a spread sheet containing the information included in the grids XI 2 XI 3 Italian Egyptian Integrated Technical Education Cluster X1 4 and XI 5 and a scanned copy of the documents submitted In case of a difference between the spread sheet and the printed and signed grid the second the Evaluation Committee will decide if these differences will constitute justified reason for rejecting the tender In any case th
48. to the addresses designated by the Parties for that purpose 4 2 If the person sending a communication requires acknowledgement of receipt he shall indicate this in his communication Whenever there is a deadline for the receipt of a written communication the sender should ask for an acknowledgement of receipt of his communication In any event the sender shall take all necessary measures to ensure receipt of his communication 4 3 Wherever the contract requires giving or issuing any notice consent approval certificate or decision unless otherwise specified such notice consent approval certificate or decision shall be in written form and the words notify certify approve or decide shall be construed accordingly Any of such consent approval certificate or decision shall not be unreasonably withheld or delayed Article5 Assignment The Contractor may not assign the contract or any part thereof or any benefit or interest Italian Egyptian Integrated Technical Education Cluster Article6 Subcontracting The Contractor may not subcontract any part of the contract OBLIGATIONS OF THE CONTRACTING AUTHORITY Article 7 Supply of documents 7 1 If necessary within thirty 30 days from contract signing the Contracting Authority shall provide the Contractor free of charge with a copy of the drawings prepared for implementing the con
49. vertically in the students workbench to be used for installing the components 8 2 2 12 Wired Industrial installations 220Vac up to 25A kit Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Direct starting and reverse of single phase and 3 phase asynchronous motors Star delta starters reversers Controlling a contactor from one point Impulse control of a contactor Separate control of two contactors Remote control starter for 3 phase asynchronous cage motor with thermal relay and fuses or with magneto thermal overload cut out breaker Remote control reverser for 3 phase asynchronous cage motor Remote control reverser for 3 phase asynchronous cage motor with block on the pushbuttons Remote control reverser for 3 phase asynchronous cage motor with limit switches Remote control reverser for 3 phase asynchronous cage motor with delay Star delta starter for 3 phase asynchronous cage motor Remote control reverser star delta starter for 3 phase asynchronous cage motor Starting with rotor resistances for 3 phase asynchronous cage motor Starting with autotransformer for 3 phase asynchronous cage motor Starting with rotor resistances for 3 phase asynchronous wound rotor motor Remote controlled pole change switch for 2 winding 3 phase asynchronous cage motor Remote controlled pole change switch for 3 phase asynchronous Dahlander motor Reverse current braking for 3 phase asynchronous
50. year period shall not be less than 3 000 000 EGP or 300 000 euro times the number of lots for which the Tenderer is presenting the offer with a maximum value of 12 000 000 EGP or 1 200 000 euro iv Staff resources Annex VII 4 List of the key staff of the Tenderer with their Italian Egyptian Integrated Technical Education Cluster qualifications and years of experience The average number of permanent staff of the Tenderer in the last 3 years period shall not be less than 10 times the number of lots for which the Tenderer is presenting the offer with a maximum of 30 permanent staff v Experience Annex VII 5 List of not more than 10 references specifying amount and the Customers name especially those concerning past performance in supply contracts relevant to similar field and carried out preferably in Middle East countries in the last five years and the list of all the references in Egypt regardless of the performance specifying amount and the Customer s name All the references should indicate the contact person with whom the Contracting Authority can verify the reference vi List of lots submitted Annex VII 6 vii Tenderer s declaration Annex VII 7 that includes the sworn statement that the Tenderer is not in one of the conditions listed in art 3 5 and the Tenderer authorisation to request information to Tenderer s references listed in Annex VII 5 b Copy of the original documents attesting the provisions of t
51. 1 6 English language for foreigners Digital Learning Resources Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 40 of 48 Topics covered Carry out not less than 50 of the following examples of topics Phonetics Present Simple Present Continuous Past Simple Past Continuous Used to Present Perfect Past Simple o Present Perfect Past Perfect Be going to Future Imperative Question tags Mode verbs Passive Going to If Hypothetic sentence Indirect sentence Phrasal verbs Nouns Pronouns Articles Questions Quantity Adjective Comparison Pronouns Adverbs Prepositions Read Write Communicate in a working environment 12 1 7 English Glossary Digital Learning Resources Topics covered Carry out not less than 50 of the following examples of topics Glossary foundations Technical and chemistry glossary Introducing Chemistry Atomic Structure Bonding Introducing Materials Properties of Materials Using Materials The Cell Human Anatomy Food and Health Earth Ecosystems Energy and Environment Genes and DNA Biotechnology and Genetic Engineering Genetic Engineering and Ethical Concerns Glossary of IT communications Information Society Computers Get Smaller and Smaller Computer Issues The Brain of the Computer Storage Input amp Output Operating Systems Languages Software Applicatio
52. 10 Photovoltaic kit 5 000 Lot 11 Discrete electronic components 5 000 Lot 12 Learning resources 10 000 Italian Egyptian Integrated Technical Education Cluster VI ANNEX RETENTION MONEY BANK GUARANTEE FORMAT lt To be completed on letterhead paper of the financial institution gt Education Development Fund 13 Haroun St Dokki Giza Egypt We ING nai ae daga hereinafter referred to as the Guarantor have been informed that A The Contracting Authority represented by the Education Development Fund hereinafter referred to as the Purchaser intends to sign a contract with hereinafter referred to as the Supplier B The Supplier has undertaken in pursuance of the Contract No signed on to supply with spare parts and services hereinafter called the Contract C It has been stipulated in the said Contract that the Supplier shall furnish you with a Bank Guarantee by a first class Bank for a sum specified therein as security for compliance with the Supplier performance obligations in accordance with the Contract D The Supplier has committed himself in case of necessity for any prorogation due to the repairing of defects pointed out by the Purchaser within the warranty period to instruct the Bank to extend the validity of the bond and the relevant expiry date THEREFORE WE hereby irrevocably undertake to be Guarantors and responsible to you on behalf of the Supplier up to a total amount of EGP e
53. 2 CAlteratioNs Lu lla 11 AMIGIE ZS SUSPENSION sla 12 Article 24 Quallv otsUpplies ulLerei onlus aa eae 14 Article 25 Inspection and testing sato nelle 14 Article 26 General principles ele aiar 15 Article 27 Delayed PavinemS 2 ane dale hee ten oa de nd eek can aca 17 Article 28 Developer 17 Article 29 Verification operations 18 Article 30 Provisional acceptan 6 ir aaa 19 Article 31 Warranty Obligation Ssns girata 21 Article 32 AMNCrEsales SOMVIGe irciil ille 22 Article 33 Final acceptance xine ses bai dal ate erbucnedaldlsatesei aiar 22 Article 34 Breach 0fGOnttaelia alireli iatale 23 Article 35 Termination by the Contracting Authority 23 Article 36 Termination by the Contractor i 25 Article 37 Forc Majeure ci E EREE E EREA E leet eters 26 Article 38 Death csrl 27 Article 39 Amicable dispute settlement ii 27 Article 40 Dispute settlement by litigation eee ceeeeeee tere eeeeeteneeeeeeeeeeteeee 27 PRELIMINARY PROVISIONS Article 1 Definitions 1 1 The headings and titles in these General Conditions are only meant to guide and shall not be taken as part thereof or be taken into consideration in the interpretation of the contract 1 2 Where the context so permits words in the singular shall be deemed to include the plural and vice versa and words in the masculine shall be deemed to include the feminine and vice versa 1 3 Words designa
54. 2 1 4 1 Consumables for 2 years For the network colour plotter 2 1 3 Minimum Requirements e Cartridges for printing 300 m of paper of normal quality e 3rolls 50m paper 2 1 5 1 Flatbed Scanner A3 Minimum Requirements e Optical resolution 1200dpi Colour depth 24bit Black and white depth 16bit Bundled software text recognition and image retouching OS Microsoft Windows and Mac OS X 2 2 Qty SOFTWARE Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 4 of 48 2 2 1 1 Set of Multi license Electrical Electronic CAD CAE for 1 teacher and 24 students Software for controls designers to create and modify electrical control drawing systems Minimum Requirements comprehensive symbol libraries ISO IEC CEI automated tasks to speed up the designing process import and export drawing from other suites facilitate collaboration configurability 2 2 2 1 Set of Multi license Mechanical CAD CAE for 1 teacher and 24 students Software for controls designers to create and modify electrical control drawing systems Minimum Requirements e comprehensive symbol libraries ISO IEC CEI automated tasks to speed up the designing process import and export drawing from other suites facilitate collaboration configurability Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC Internati
55. 3 digital multi meter resolution 4 000 Digits e Measurement classification CATII 1000V e Voltage and current measuring ranges 400mV 1000V DC 400mV 1000V AC 40pA 10A DC 40uA 10A AC Measurement ranges 100mohm 40Mohm Capacitance measuring range 1pF to 200pF Frequency measuring range 0 001Hz to 500kHz Duty cycle measurements Continuity diode and transistor testing e Automatic range selection and battery shut off min max and data hold function e Installation user and maintenance manual Stool for Students Ergonomic and comfortable stool without arms and according to the height of the benches Minimum Requirements Rigid without rotation wheels and adjustable elements Heavy duty strong and secure construction Sliding door storage unit Sliding door storage unit of coordinated design with the workbench to accommodate panels with practical exercises under completion Minimum Requirements e Dimension about 180Hx60Wx95L cm e Lockable e Heavy duty type e __ Sliding door Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 46 of 48 KITS for PRACTICAL EXERCISE General Requirements for each kit 5 Box with equipment to carry out the practical exercises 6 Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered Vertical panel to wire practical exercises Com
56. AL EXERCISE General Requirements for each kit 1 Box with equipment to carry out the practical exercises 2 Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered 3 Vertical panel 4 Commercial datasheet for each component and material included in the box 5 List of practical exercises title and description that can be carried out 6 Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit 8 2 1 42 Circuits with contactors 220Vac up to 25A kit Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Installing and cabling buttons and pushbuttons of different colours with 1 NO contact 1 NC 10 A set of three fuse holders with fuses NO and NC contacts Installing and cabling multi function timers delayed closing delayed opening Installing and cabling Jog mode Installing and cabling Self latchin
57. CE AND MAINTENANCE Article 28 Delivery 28 1 The Contractor shall deliver the supplies in conformity to the conditions specified in the Supply Contract The Contractor shall pack the goods such as to protect them from damages or deterioration during their transport to final destination Packaging shall be such to withstand with no limits rough handling extreme temperatures saltiness and precipitation during outdoor transport and storage Packaging size and weight shall be suited if necessary to the distance of the goods final destination and to the possible lacking of facilities for handling heavy loads during transport 28 2 Packaging marking and documents inside and outside packages shall meet the Italian Egyptian Integrated Technical Education Cluster particular requirements stated in the Supply Contract except for any modification due to new instructions of the Contracting Authority 28 3 The Contractor is responsible for the goods delivery to the place stated in the Supply Contract 28 4 A special list filled by the Contractor shall accompany each supply Such list shall particularly state Date of delivery Reference to the Supply Contract The Contractor s name and address Goods specifications 28 5 Each package shall be clearly marked with the serial number corresponding to the same number in the list mentioned in Article 28 4 and the package shall contain the list of its relevant content 29 6 The
58. E TO 768 2008 EC EVALUATION GRID Supply of electrical laborat i t Tender Contract SPP tes Sa a er AA Tenderer s Lot No services and digital learning resources for envelope Title name and title the ITEC in Fayoum number Origin 768 2008 Notes Descriptions Features List of components materials Tenderer s Ref to Annex E N O yes no of the tenderer Name Authorized signature Date Stamp of the tenderer the Tenderer should include here the list of items indicated in the Technical Specifications Annex E the Tenderer should indicate E for Egypt or European origin N for USA Canada Japan Korea Taiwan origin and O for other countries the Tenderer should indicate here if the item is yes or not no in compliance with the Directive 768 2008 EC the Tenderer should indicate the annex where origin is certified and compliance to the Directive 768 2008 EC is documented Italian Egyptian Integrated Technical Education Cluster XI 4 ANNEX PRACTICAL EXERCISES EVALUATION GRID Supply of electrical laboratory equipment Tender Contract PP 4 aa AS Tenderer s Lot No services and digital learning resources for envelope 3 Title name and title the ITEC in Fayoum number f og Tenderer s Ref to Practical exercises Yes No Notes Descriptions Features of the te
59. ES5 EXPeron6o ss ona atalanta 11 MIG Lots submilted s ara ratto atea tail 12 VII 7 Teniderers declaratioit sica erette 13 VIII ANNEX GLOSSARY OF TERMS iii 15 IX ANNEX LIST OF INCOTERMS i 18 X ANNEX EVALUATION REPORT i 19 Kel Tmetable i aaa 19 X 2 ODSEIVers uiu iaia 19 Kes EVA oe cise illa eli 19 X 4 Final recommendations serieta haben aa ite 24 Feit SigNAtU ES een a E aa ngi 24 XI ANNEX TENDER OPENING REPORT sctcccrietuctccste made rela i 26 XI 1 ANNEX ADMINISTRATIVE COMPLIANCE ASSESSMENT GRID 30 XI 2 ANNEX TECHNICAL COMPLIANCE ASSESSMENT GRID 31 XI 3 ANNEX ORIGIN AND COMPLIANCE TO 768 2008 EC EVALUATION GRID 32 XI 4 ANNEX PRACTICAL EXERCISES EVALUATION GRID 33 XI 5 ANNEX DIGITAL LEARNING RESOURCES EVALUATION GRID 34 Italian Egyptian Integrated Technical Education Cluster I ANNEX PRICE LIST Contract title Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program Contract Authority Education Development Fund 13 Haroun St Dokki Giza Egypt To the Attention of Dr Mohammad Megahed Tenderer lt denomination name of the tenderer gt The offered DAP price should include the manufacture the assembling the delivery the installation the trai
60. Education Cluster VII 2 Contact person for this tender Name Position in the tenderer organisation Address Telephone land line Fax Telephone mobile e mail VII 3 Economic and financial capacity Please complete the following table of financial data based on your annual accounts and your latest projections If annual accounts are not yet available for this year or last year please provide your latest estimates clearly identifying estimated figures in italics Figures in all columns must be on the same basis to allow a direct year on year comparison to be made or if the basis has changed an explanation of the change must be provided as a footnote to the table Any clarification or explanation which is judged necessary may also be provided 2 years 1 year before Financial data before last y Last year This year Vea last year Annual turnover excluding this contract Cash and cash equivalents at the beginning of the year Short term liabilities at the beginning of the year Italian Egyptian Integrated Technical Education Cluster VII 4 Staff resources Please provide the following personnel statistics for the current year and the two previous years Year before last year Last year This year Average 7 Total for Total for Total for fields k A manpower j fields related fields related Overall related to this Overall al Overall a to this to this contract
61. Emergency Push Button with mechanical lock and 4 turn to unlock key switch and min voltage coil protection e AC low voltage line 12 24 V 4 A single phase line overload and short circuit protection e DC voltage line 12 0 12 VDC 2 2 A e DC voltage line 5 VDC 2 A e Variable output 1 Vdc 24 Vdc 2 A regulated and electronically protected e Operating and maintenance manuals 11 2 Qty KITS for PRACTICAL EXERCISE General Requirements for each kit 1 Box with equipment to carry out the practical exercises Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 34 of 48 N Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered Vertical panel to wire practical exercises Commercial datasheet for each component and material included in the box List of practical exercises title and description that can be carried out Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with p
62. ION AND REQUIREMENTS Lot 9 HOME BUILDING AUTOMATION KIT e TheKITs will be installed in the PLC and Automation LAB See Annex C General Requirements e The KITs for practical exercises must be compatible with the vertical benches in the PLC and Automation LAB Lot 09 or installed in a suitable vertical structure to be positioned and fixed on the benches e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical Domestic Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD SO OSX and or Linux and or Windows in English and or Italian and or Arabic in three copies 4 hours demo to teachers demonstrating most of the functionalities of the equipment 9 1 Qty KITS for PRACTICAL EXERCISE General Requirements for each kit 1 Box with equipment to carry out the practical exercises 2 Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered Vertical panel to wire practical exercises Commercial datasheet for each component and material included in the box List of practical exercises title and description that can be carried out Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and clo
63. LS e Components and tools should comply with decision No 768 2008 EC and should have the EC European mark 5 1 Qty Electrical installation materials 5 1 1 12 Ampere metric clamp Suited to measuring discharge currents leakage currents and differential currents to BGV A3 In addition to the current clamp function this current clamp also includes the most common multi meter functions via measuring connectors such as voltage measurement resistance and continuity Minimum Requirements e Voltage AC 0 1 400 V e Current AC 0 01 mA 60 A e Resistance 0 1 400 Q e Frequency range 40 Hz 1 kHz e Tested with 600 V CAT IV e Installation user and maintenance manual 5 1 2 12 Voltage phase continuity tester with field direction indicator Max 400V Minimum Requirements e Power supplied by a durable solar cell and rechargeable lithium battery e Voltage insulation strength 5 kV e Nominal voltage range 12 400 V e Frequency range 0 2000 Hz e Continuity testing 0 500KQ 5 1 3 24 TRMS Digital multimeter Minimum requirements e 22000 counts e Auto Manual Ranging e 46 segments analogue bar e True RMS measures e DC voltage 220 mV to 1000 V AC Voltage 220 mV to 750 V e DC Current 220 microA to 10 A AC Current 220 microA to 10 A Fuse protection e Resistance 220 ohm to 220 Mohn 7 ranges e Capacitance 25 nF to 220 mF e Frequency 10 Hz to 220 MHz 5 1 4 100 Set of tools for
64. NT CONDITIONS Payments shall be made in accordance with the Special and General Conditions Payments shall be made by means of irrevocable and confirmed Letter of Credit which currency shall be EGP and issued by an Egyptian Bank as Agent Bank within 30 days from the date of receiving of the Contract from the Contracting Authority according to the following terms and conditions The contract is made up of the following documents listed according to precedence this Contract agreement Italian Egyptian Integrated Technical Education Cluster the Instructions to Tenderers as per Section A the Special Conditions as per Section C including the technical annex Section E Technical Specifications including clarifications before the deadline for submission of tenders the Contractor s tender including annexes the Price List as per Annex ll the General Conditions as per Section B The different documents making up the contract shall be deemed to be mutually explanatory in case of ambiguity or divergence they should be read in the order in which they appear above For all matters not covered by the above provisions reference shall be made to the Egyptian Law ARTICLE 5 COMING INTO FORCE The coming into force of the contract is subject to the fulfilment of the following conditions a Issuing and validity of the Performance Guarantee as per Article 2 b Issuing of a Letter of Credit by the Egyptian Bank
65. Payment shall be made without objection or legal proceedings of any kind upon receipt of your first written claim sent by registered letter with confirmation of receipt if the Tenderer does not fulfil all obligations stated in its tender We shall not delay the payment nor shall we oppose it for any reason whatsoever We shall inform you in written form as soon as the payment has been made The law applicable to this guarantee shall be that of Egypt Any dispute arising out of or in connection with this guarantee shall be referred to the courts of Egypt The guarantee will enter into force and take effect from the submission deadline of the tender and will have a duration of lt number of days gt calendar days from this date as for articles 25 of the Instructions to Tenderer Namers aa Position Signature Date lt Date gt Italian Egyptian Integrated Technical Education Cluster Amount of the tender guarantee for each lot offered Value of the tender List of the lots guarantee EGP for each Lot Lot 1 Language lab 10 000 Lot 2 CAD CAE lab 5 000 Lot 3 Chemistry lab 25 000 Lot 4 Electrical residential installations 20 000 Lot 5 Electrical installation materials 25 000 Lot 6 Electrical equipment 10 000 Lot 7 Electronic motor drivers 30 000 Lot 8 Electrical industrial installations 10 000 Lot 9 Home building automation kit 20 000 Lot
66. Qty 1 DESCRIPTION AND REQUIREMENTS Lot 1 LANGUAGE LAB e Dimensions of the Language Laboratory are about 11m w x 5 25m I layout can be requested to the contracting authority e Computers for teacher see Annex A and students see Annex B and intelligent board will be provided by the Contracting Authority General Requirements e The items of this lot should be delivered installed connect in a network and functionally operational in the Language Laboratory e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment 1 1 Qty FURNITURES 1 1 1 24 Students Language Laboratory furniture Language laboratory single desks with separators panels or boxes to allow increased privacy and separation of students Minimum Requirements e Dimensions about Height 85 cm width 60 cm e Strong and secure construction e Rounded corners for added safety 1 2 Qty HARDWARE 1 2 1 1 Teacher Language Laboratory Auxiliary Equipment Auxiliary teachers equipment to support students during classes Minimum Requirements e Audio quality professional handset with unidirectional dynamic microphone e External speakers for teacher s desk 1 2 2 1 Class Satellite TV Satellite receiver to record and disp
67. RMS EXW FCA CPT CIP FAS FOB CFR CIF DAT DAP DDP EX WORKS named place FREE CARRIER named place CARRIAGE PAID TO named place of destination CARRIAGE AND INSURANCE PAID to named place of destination FREE ALONGSIDE SHIP named port of shipment FREE ON BOARD named port of shipment COST AND FREIGHT named port of destination COST INSURANCE AND FREIGHT named port of destination DELIVERED AT TERMINAL type of terminal city and country DELIVERED AT PLACE named place of destination DELIVERED DUTY PAID named place of destination Italian Egyptian Integrated Technical Education Cluster X ANNEX EVALUATION REPORT Contract title Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program Annexes A Tender opening report and its annexes B Administrative compliance grid C Technical compliance grid and evaluation grids X 1 Timetable Date Time Venue Preparatory session Deadline for the submission of tenders Tender opening session lt Meeting 1 gt lt Meeting 2 gt lt Meeting gt X 2 Observers Name Representing X 3 Evaluation X 3 1 Preparatory session The Chairperson informed the Evaluation Committee of the scope of the proposed contract identified the organisations responsible for prepa
68. RTICLE 15 SUPPLIER S BANK ACCOUNT The bank account of the Supplier into which payments shall be made is Account number Account name Bank name amp address Corresponding bank if any Italian Egyptian Integrated Technical Education Cluster Written in English in eight originals of equal legitimacy and value THE CONTRACTOR The legal Representative Place Date signature THE CONTRACTING AUTHORITY The Education Development Fund 13 Haroun St Dokki Giza Egypt Represented by the Secretary General Place Date signature Italian Egyptian Integrated Technical Education Cluster Leal Led S083 i IRA lop Ta Fund C ka naSvilippo sd qui du E Technical Specifications A ii cali gall e Lot 1 language lab e Lot 2 CAD CAE lab e Lot 3 chemistry lab e Lot 4 electrical residential installations e Lot 5 electrical installation materials e Lot 6 electrical equipment e Lot 7 electronic motor drivers e Lot 8 electrical industrial installations e Lot 9 home building automation kit e Lot 10 photovoltaic kit e Lot 11 discrete electronic components e Lot 12 learning resources e Annex A Teachers equipment e Annex B Students equipment e Annex C PLC and Automation LAB Integrated Technical Education Cluster Project at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 1 of 48 ITEM
69. Up to 75 of maximum number of points allocated e Atleast 70 of the items are in compliance Up to 50 of maximum number of points allocated e Atleast 50 of the items are in compliance Up to 25 of maximum number of points allocated Compliance to Technical 70 50 25 Specification Italian Egyptian Integrated Technical Education Cluster Criteria for evaluation Maximum Allocated Points per Criterion Scoring Criteria Offer Score according to its degree of Compliance with set Criteria Less than 50 of the items are in compliance Zero Points Origin of Goods Egypt or Italy Maximum number of points EU country USA Canada Japan Korea Taiwan 50 of maximum allocated points Others or without a specified origin or local customization of foreign goods zero points Compliance to European Parliament and Council decision N 768 2008 E C At least 90 of the items are market CE Up to 100 of maximum number of points allocated At least 80 of the items are market CE Up to 75 of maximum number of points allocated At least 70 of the items are market CE Up to 50 of maximum number of points allocated At least 60 of the items are market CE Up to 25 of maximum number of points allocated Less than 50 of the items are market CE Zero Points Number and content of practical exercises Language of Digital Learning Resources At least 90 of th
70. abilization circuits The feedback concept and the required components Determining the Q point analytical and graphical methods BJT operation zones over the Ic f VCE diagram e Main parameters of the BUT VBE gain Zin Zout e Classical basic configuration circuits CE common emitter CC common collector Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 36 of 48 CB common base Characteristics and comparisons among the different configurations current gain voltage gain power gain Zin Zout FET transistors J FET and MOSFET the JFET amplifier Comparison among J FET and MOSFET The J FET amplifier the constant current generator circuit The A B C class amplifiers the discriminating criteria The fundamental equations Optoelectronics components photorresistor photodiode phototransistor The curves current vs luminosity e Temperature transducers and their characteristics The R f T curve Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 37 of 48 ITEM Qty 10 DESCRIPTION AND REQUIREMENTS Lot 12 LEARNING RESOURCES Digital resources to be used in technical and professional schools students age 15 18 12 1 Qty ITALIAN DIGITAL LEARNING RESOURCES General Requirements e Digital resources to b
71. accordance with the Special Conditions of this contract Italian Egyptian Integrated Technical Education Cluster cala J gli 3 giri Education Development Fund C Dad nasviluppo AL le dali C SPECIAL CONDITIONS aliti Jeg pil Reference Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program Contracting Authority Education Development Fund 13 Haroun St Dokki Giza Egypt Place of destination Demo Technical Secondary School Fayoum Egypt Table of content Article t Applicable LAW lcieeaa 2 Article 2 cASSIGNMENI araldica 2 Article 3 SUDCONISGIN A iii 2 Article 4 Assistance with local regulation 2 Article 5 General obligations ii 2 Aricle 6 Vigilia 2 Article 7 Performance guarantee ii 2 ANICIG S Insurancss sacrale ia 3 Article 9 Performance programme time table 3 Article 10 Supplier s Wings aiee 3 Article 11 COMMonccnenrodelen lilla 3 Article 12 Delays in execution and penalties i 3 Article 13 Alteration seats 3 Article 14 Inspection aNcigsi caalnnaire 4 Article 15 Payments proG dures ra ili 4 Article 16 Packaging for delivery rl 6 Article 17 Verification Pertini ira 6 Article 18 Provisional Acceptance siii 6 Ariigie 19 Waranty eccepire iii 6 Italian Egyptian Integrated Technical
72. active whiteboards theory simulations exercises and self evaluation tests e List of digital resources title and description Online e catalogue of electrical products and materials with updates e Documentation in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 43 1 1 Fundamentals on electrical components Minimum Requirements Carry out not less than 50 of the following topics e Protection against direct and indirect contacts CEI 64 8 The electric circuit concept Electrical conductivity Units of measure and symbols Ohm s Law Measures in a circuit Voltage generators Resistance of a component Serial connection of resistors Parallel connection of resistors Resistance of a sensor Temperature controlled heating Electrical charge Condenser A condenser in a DC circuit A condenser in an AC circuit Condenser applications Variable condenser Inductance in DC and AC circuits Inductance applications Delayed shut off light Energy production and transmission Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 16 of 48 ITEM Qty 5 DESCRIPTION AND REQUIREMENTS Lot 5 ELECTRICAL INSTALLATION MATERIA
73. all attach a declaration attesting that such items are deemed necessary for the overall supply and are not available with an origin as required motivating such statement with solid evidences different from mere economic justification Article 7 Performance guarantee The amount of the performance guarantee shall be five percent 5 of the contract price inclusive of the Tender Guarantee including any amounts stipulated in riders to the contract The performance guarantee or what remains shall be released within seven 7 days of the issue of the final acceptance certificate Italian Egyptian Integrated Technical Education Cluster Such Performance guarantee shall be delivered to the Contracting Authority prior the Supply Contract signature In case of changes for whatsoever reason in the delivery scheduled the Supplier commits itself to instruct the Bank to extend the validity of the guarantee and the relevant expiring date Article8 Insurances The Supplier shall also provide an All risks policy for the 110 of the contract value Insurance shall be made in the name of the Contracting Authority Article9 Performance programme time table The time limit for delivery is set according to article 1 of Section A Instructions to Tenderers The Supplier must provide a project time schedule indicating the delivery and if required of the installation of all goods Article 10 Supplier s drawings The Contracting Authority will esta
74. ance with Articles 22 3 and 22 5 shall be ascertained in accordance with the following principles a where the task is of similar character and executed under similar conditions to an item priced in the bill of quantities or budget breakdown it shall be valued at such rates and prices contained therein b where the task is not of similar character or is not executed under similar conditions the rates and prices in the contract shall be used as the basis for valuation in so far as is reasonable failing which a fair valuation shall be made by the Contracting Authority c where a variation is necessitated by a default or breach of contract by the Contractor any additional cost attributable to such variation shall be borne by the Contractor 22 7 On receipt of the administrative order requesting the variation the Contractor shall proceed to carry out the variation and he is bounded by that order as if such variation were stated in the contract The supplies shall not be delayed pending the granting of any extension of time for completion or adjustment to the contract price Where the order for a variation precedes the adjustment to the contract price the Contractor shall keep records of the costs of undertaking the variation and of the time expended thereon Such records shall be open to inspection by the Technical Committee at all reasonable times 22 8 Contractual variations not covered by an administrative order must be formalised thro
75. arantee and the relevant expiry date in case of changes for whatsoever reason in the delivery schedule 2 2 The Performance Guarantee is kept to reimburse the Purchaser for any damage caused by the fact that the Supplier has not completely and properly fulfilled his obligations as laid down the Contract 2 3 The Performance Guarantee or what s left of it shall be released within 7 days from the date of the final acceptance by the Contracting Authority It will become automatically null and void after 30 thirty days from the date of the Certificate of Conformity at final destination and of delivery issued by the Control and Surveillance Company ARTICLE 3 PRICE OF THE CONTRACT The total price of the supply delivered as per Incoterms 2010 Annex IX with destination is of EGP EGP only The price of the supplies shall be the same shown on the financial offer specified in Annex Il and shall be the sole remuneration owed by the Contracting Authority to the Supplier under the contract It shall be firm and not subject of any revision The Contractor undertakes that the above mentioned prices are fixed and cannot vary for the entire period of the Contract Any taxes custom duties and expenses relevant to the importation of goods into the Arab Republic of Egypt including commission to be paid to the Egyptian Bank for the issue of the letters of credit as per next Article 4 are at the Contracting Authority charge ARTICLE 4 PAYME
76. arge of the after sales and maintenance service does not provide its services by the deadline established in the Technical Specifications the Contracting Authority shall be entitled to claim a delay charge In such circumstance the Contracting Authority shall be entitled to charge and deduct for every day of delay the 0 001 of the contract price up to a 5 of the same contract price 20 3 The amount corresponding of the total delays will be deducted from the Performance Guarantee Article 21 Final Acceptance After 36 months of warranty period starting from the Certificate Provisional Acceptance date without reserve about the Supplier s performance made from the Contracting Authority the commodities will be finally accepted and the retention Money Bond released In order to proceed as above mentioned a Certificate of Final Testing stating the date when the Supplier has fulfilled his supply contract s obligations shall be issued and signed by the Contracting Authority and signed for confirmation by the Contracting Authority within 90 ninety days from the date of expiry of the 36 months warranty period see clause no 31 of the General Conditions Article 22 Amicable settlement of disputes The contracting parties shall make every effort to settle amicably any dispute which may arise between them as per Article 39 of the General Conditions If an agreement is not reached within 120 days of the start of the amicable dis
77. arties to the other for any specific breach identified in the contract Most economically advantageous tender the tender deemed to be the best by the criteria laid down for the contract in question e g quality technical properties aesthetic and functional qualities after sales service and technical assistance delivery date or performance period the price or lowest price These criteria must be published in the procurement notice or stated in the tender dossier Purchaser is a Government or a juridical or natural person that concludes the Supply Contract or in whose behalf the Supply Contract is concluded by the Contracting Authority In this Tender procedure the Purchaser is the Education Development Fund Public Company is a company normally owned by many shareholders which is entitled to raise funds and capital by issuing Securities as stock or bonds for sale to the general public in an open market it has normally permission to offer its Securities through the Stock Exchange where it is registered Special Conditions the Special Conditions issued by the Contracting Authority as part of the invitation to tender comprising amendments to the general conditions special contractual clauses and a technical annex setting out the technical specifications State Company State owned Company Government owned Corporation is a company created by a Government State to perform commercial activities under control of a governmental Ent
78. ast three appointed by the Contracting Authority and possessing the technical linguistic and administrative capacities necessary to give an informed opinion on tenders The Committee is in charge to perform the Tender s examination evaluation and provisional awarding A representative of the Donor the Italian Expert may be invited to sit on the Italian Egyptian Integrated Technical Education Cluster committee as a non voting member observer Final test certificate the certificate or the certificates are issued by the Contracting Authority to the Contractor upon the expiring of the technical warranty period and they certify that the contract obligations have been fulfilled by the Contractor General Conditions the general conditions comprising clauses of an administrative financial legal and technical nature relating to the performance of contracts General damages the sum not stated beforehand in the contract which is awarded by a court or agreed between the parties as compensation payable to an injured party for a breach of the contract by the other party In writing this includes any hand written typewritten or printed communication including telex cable and facsimile transmissions Liquidated damages the sum stated in the contract as compensation payable by the Supplier to the Contracting Authority for failure to complete the contract or part thereof within the periods under the contract or as payable by either p
79. ation testing commissioning provision of expertise supervision maintenance repair training and other such obligations connected with the items to be provided under the contract Conflict of interest any event influencing the capacity of a candidate Tenderer or Supplier to give an objective and impartial professional opinion or preventing him at any moment from giving priority to the interests of the Contracting Authority Any consideration related to possible contracts in the future or conflict with other commitments past or present of a candidate Tenderer or Supplier or any conflict with his own interests These restrictions also apply to subcontractors and employees of the candidate Tenderer or Supplier Contract value the sum stated in the contract representing the initial estimate payable for carrying out the supplies or such other sum as ascertained at the end of the contract as due under the contract Contracting Authority the party which concludes the contract for and on behalf of the recipient purchaser It can be a Governmental Department a juridical or a natural person appointed by the Purchaser according to the Law of his Government who is responsible for the management and or monitoring of the fulfilment of the Supply Contract In this Tender procedure the Contracting Authority is the Education Development Fund Day calendar day Evaluation committee a committee made up of an odd number of voting members at le
80. ation in the limit of 50 A4 pages for each envelope 11 2 Additional information can be included exclusively in digital form providing a CD DVD with a table of content and a guide for accessing the documentation provided The digital information should be compatible with OSX Linux and Windows operating systems The tenderer should also assure that the digital material is free from viruses and bugs 11 3 The tenderer should fill date sign with a blue pen stamp and include in the proper envelope all the pages of the grids requested in this article These grids will be included in the contract if awarded to the tenderer 11 4 The Envelope A Administrative Compliance should include the Annex XI 1 Administrative Compliance Assessment grid and the documents and information required in article 3 6 of these instructions 11 5 The Envelope B Technical Offer Lot No and title should include e the Annex XI 2 Technical Compliance Assessment grid and all the documents and information required to comply with the general and minimum requirements indicated in Annex E Technical Specifications e the Annex XI 3 Origin and Compliance to 768 2008 EC Evaluation grid and all the documents and information required to comply with requirements indicated in article 4 1 and 4 2 of these instructions e the Annex XI 4 Practical Exercises Evaluation grid and all the documents and information required to comply with
81. ay provide the assistance requested to the Contractor at the Contractor s cost 8 2 If necessary the Contractor shall duly notify the Contracting Authority of details of the supplies so that the Contracting Authority can obtain the requisite permits or import licences 8 3 If necessary the Contracting Authority will undertake to obtain in accordance with the Special Conditions the requisite permits or import licences within a reasonable period taking account of the performance dates for the contract 8 4 Subject to the provisions of the laws and regulations on foreign labour of the State in which the supplies have to be delivered the Contracting Authority shall make every effort to help the Contractor obtaining all the visas and permits required With reference to the personnel whose services the Contractor and the Contracting Authority consider necessary and residence permits for their families Italian Egyptian Integrated Technical Education Cluster OBLIGATIONS OF THE CONTRACTOR Article9 General Obligations 9 1 The Contractor shall perform the contract with due care and diligence including where specified the design manufacture delivery to site erecting testing and commissioning of the supplies and carrying out of any other work including the remedying of any defects in the supplies The Contractor shall also provide all necessary equipment supervision labour and facilities required for the performance of the contract
82. be forwarded to the Contracting Authority and their results are final The counter test s expenses are at charge of whom the counter test results were unfavourable 25 7 Carrying out their tasks the Technical Committee and the personnel entrusted with the job by the same Committee shall not disclose to anybody except for those who have the right to know them information obtained during the inspection and testing performance and concerning manufacturing procedures and enterprise running PAYMENTS Article 26 General principles 26 1 Payments shall be made in EGP The Special Conditions shall lay down the administrative or technical conditions governing payments of pre financing interim and or final payments made in accordance with the General Conditions 26 2 Payments due by the Contracting Authority shall be made to the bank account mentioned on the financial identification form completed by the Contractor The same form annexed to the payment request must be used to report changes of bank account 26 3 Sums due shall be paid within no more than forty five 45 days from the date on which an admissible payment request is registered by the competent department specified in the Special Conditions The date of payment shall be the date on which the institution s account is debited The payment request shall not be admissible if one or more essential requirements are not met 26 4 The forty five 45 day period may be suspended by notifying
83. blish if considered necessary a Technical Committee to examine the drawings submitted by the Supplier Article 11 Commencement order The commencement order will be issued within the contract signature Article 12 Delays in execution and penalties For each day of delay in the delivery on site of the goods as indicated in the agreed time schedule the Contracting Authority shall apply a penalty equal to 0 03 and up to a maximum of 10 of the contract price and up to a 30 days of delay Delays in execution exceeding 30 days may result in breach of the contract in accordance to Articles 34 and 35 of the General Conditions Article 13 Alterations 13 1 The contract may only be modified in the following cases a modifications of applicable laws and regulations b unforeseen and unforeseeable circumstances including the implementation of new materials components or technology not existing when the award procedure was commenced provided that the modifications may only ameliorate the quality of the performance without increasing the contract total amount and without quality of other goods inside the Supply c events related to the nature or the quality of the goods or places where the contract activities take place which occur during the contract execution and were unforeseeable when the contract was made d when the need arises the Contracting Authority has the right to increase or decrease the quantity of the requested items per
84. bt for development SWAP program We the undersigned lt name and address of financial institution gt hereby irrevocably declare that we guarantee as primary obligor and not merely as a surety on behalf of lt Contractor s name and address gt hereinafter referred to as the Contractor the payment to the Contracting Authority of lt amount of the performance guarantee gt representing the Performance Guarantee mentioned in the General Conditions of the contract Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program concluded between the Contractor and the Contracting Authority hereinafter referred to as the Contract Payment shall be made without objection or legal proceedings of any kind upon receipt of your first written claim sent by registered letter with confirmation of receipt stating that the Contractor has failed to perform its contractual obligations fully and properly and that the Contract has been terminated We shall not delay the payment nor shall we oppose it for any reason whatsoever We shall inform you in writing as soon as the payment has been made We accept notably that no amendment to the terms of the Contract can release us from our obligation under this guarantee We waive the right to be informed of any change addition or amendment to the Contract We note that the guaran
85. cage motor Sequence starting of 3 3 phase asynchronous motors Contactor starter for single phase asynchronous motor Remote control reverser for single phase asynchronous motor 8 3 Qty DIGITAL LEARNING RESOURCE for INDUSTRIAL INSTALLATIONS Digital resources for Electrical Lab in technical and professional schools students age 15 18 General Requirements e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e List of digital resources title and description e Online e catalogue of electrical products and materials with updates e Documentation in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 8 3 1 Electrical Panels Power distribution enclosure and cabinets Minimum Requirements Carry out the following topics e Assembling procedures Security Technical features Maintenance Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 28 of 48 Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 29 of 48 ITEM Qty 8 DESCRIPT
86. cancellation is not caused by the Contractor s actions or omissions the Contractor himself has the right to demand not only the amount due for the already supplied goods as well as a compensation for the suffered damages Article 36 Termination by the Contractor 36 1 The Contractor upon a 14 days notice to the Contracting Authority may cancel the Supply Contract in case the Contracting Authority a Omits to effect the payments due to the Contractor b Keeps on failing to fulfil the obligations laid down in this Supply Contract despite repeated reminders c Stops goods delivery or part of them for more than 180 one hundred and eighty days for reason not mentioned in the Supply Contract or not due to the Contractor Such cancellation does not compromise any other right the Supply Contract grants the Contracting Authority or the Contractor In case of cancellation the Contracting Authority shall compensate the Contractor for any possible loss or damage he has suffered Such additional payments must not exceed a maximum fixed in the Supply Contract 36 2 The Contractor may after giving 14 days notice to the Contracting Authority terminate the contract if the Contracting Authority a fails to pay the Contractor the amounts due under any certificate issued by the Technical Committee after the expiry of the deadline stated in the Special Conditions b consistently fails to meet its obligations after repeated reminders
87. chnical Offer e the number and the title of the lot offered 10 6 The Envelope A must contain three envelopes identified as per 10 3 and marked respectively as follows e ORIGINAL Envelope A Administrative Compliance e First COPY Envelope A Administrative Compliance e Second COPY Envelope A Administrative Compliance 10 7 Each technical offer envelope for each lot offered must contain three envelopes identified as per 10 5 and marked respectively as follows e ORIGINAL Envelope B Technical Offer Lot No title e First COPY Envelope B Technical Offer Lot No title e Second COPY Envelope B Technical Offer Lot No title 10 8 The Envelope C must contain three envelopes identified as per 10 3 and marked respectively as follows e ORIGINAL Envelope C Financial Offer e First COPY Envelope C Financial Offer e Second COPY Envelope C Financial Offer 10 9 Any tender submitted without providing the requested copies will be excluded without appeal Italian Egyptian Integrated Technical Education Cluster A 11 Content of tenders 11 1 The envelopes should include all the documents and information justifying the compliance to the requirements stated in these instructions to tenderer In particular the annexes provided by the tenderer should be numbered progressively and the number should be included in the appropriate line of the corresponding grid The Tenderer should provide only relevant and appropriate document
88. cise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit 10 1 2 6 Photovoltaic kit General Requirements photovoltaic panel 40W 100 W solar charge controller 12 24V 10 A input 60V lead battery 12V 100Ah monitor unit with large display showing data during electricity production inverter 12 24Vdc 220Vac 300W 50Hz charge controller e solar radiation photometer Minimum Requirements Carry out not the following examples of practical exercises Assemble a simple photovoltaic circuit with inverter charge controller and battery Install and control a group of lights Measure the efficiency of the system Assess the cost of energy produced and consumed 10 2 Qty DIGITAL LEARNING RESOURCES for HOME and BUILDING AUTOMATION and RENEWABLE ENERGY General Requirements e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e List of digital resources title and description Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 32 of 48 e Documentation in Arabic
89. city hamper the Supply Contract s performance h In case a corporate structure modification causes a change in the Contractor s legal status i In case the Contractor fails to submit the required bond or insurance or a new bond or insurance if the person who gave the previous bond or insurance cannot fulfil the undertaken obligations 35 3 The cancellation of the Supply Contract does not compromise any other right the Supply Contract grants the Contracting Authority and the Contractor Afterwards the Contracting Authority may sign other purchase contracts with a third party The Contractor responsibility concerning any delays in the Supply Contract performance ceases to exist immediately after the Supply Contract s cancellation but any other previous responsibility linked to the Supply Contract stands 35 4 After having notified that the Supply Contract has been cancelled the Contracting Authority shall order the Contractor to take immediate measures to settle in a prompt and correct way the Supply Contract at minimum cost 35 5 The Contracting Authority shall certify as soon as the Supply Contract cancellation is occurred the value of the goods and all the amounts due to the Contractor at the cancellation date 35 6 Incase of cancellation a In the Contractor s presence or of his representatives or after due convocation of all of them the Contracting Authority shall write out as soon as possible a report on the delivered go
90. cting Authority 33 2 The contract shall not be considered to have been performed in full until the final acceptance certificate has been signed or is deemed to have been signed by the Contracting Authority 33 3 Notwithstanding the issue of the final acceptance certificate the Contractor and the Contracting Authority shall remain liable for the fulfilment of any obligation incurred under the contract prior to the issue of the final acceptance certificate which remains unperformed at the time that final acceptance certificate is issued The nature and extent of any such obligation shall be determined by reference to the provisions of the contract BREACH OF CONTRACT AND TERMINATION Article 34 Breach of contract 34 1 A Party shall be in a breach of contract if it fails to discharge any of its obligations under the contract 34 2 Where a breach of contract occurs the injured Party shall be entitled to the following remedies a damages and or b termination of the contract 34 3 In addition to the above mentioned measures damages may be awarded They may be either a general damages or b liquidated damages The amount and procedures for these damages shall be laid down in the Special Conditions 34 4 Recovery of damages disbursements or expenses resulting from the application of measures provided for in this Article shall be carried out by deduction from the sums due to the Contractor from the deposit or by payment under
91. ctor shall a Provide the Technical Committee provisionally and free of charge with assistance samples or items machines equipment tools manpower materials drawings and manufacturing data usually required for inspection and testing b Decide together with the Technical Committee date and place for testing c Assure the Technical Committee free access to the testing site at any reasonable time Italian Egyptian Integrated Technical Education Cluster 25 4 In case the Technical Committee fails to attend the testing at the agreed date the Contractor unless different instructions can carry out the aforesaid testing being the Technical Committee considered as present The Technical Committee shall immediately send copies of the testing results duly certified to the Contracting Authority 25 5 In case items and materials get successfully through the testing mentioned in the present article the Technical Committee shall notify it to the Contractor and shall sign the relevant certificate 25 6 In case of disagreement between the Technical Committee and the Contractor concerning the testing results each Party shall notify to the other its own opinion within fifteen 15 days from the disagreement admission Either the Technical Committee or the Contractor may ask for a new testing to be carried out at the previous conditions or at of one of the Parties request by an expert chosen by mutual consent All testing reports shall
92. ctor for approval 14 4 The Contractor shall supply additional copies of approved drawings in the form and numbers stated in the contract or in subsequent administrative orders 14 5 The approval of the drawings documents samples or models by the Contracting Authority shall not relieve the Contractor from any of his obligations under the contract 14 6 The Contracting Authority through the Technical Committee shall have the right to inspect all drawings documents samples or models relating to the contract at the Contractor s premises at all reasonable times 14 7 Before provisional acceptance of the supplies the Contractor shall supply operation and maintenance manuals together with drawings which shall be in such detail that shall enable the Contracting Authority to operate maintain adjust and repair all parts of the supplies Unless otherwise stated in the Special Conditions the manuals and drawings shall be in the language of the contract and in such forms and numbers as stated in the contract The supplies shall not be considered completed for the purpose of provisional acceptance until such manuals and drawings have been supplied to the Contracting Authority Article 15 Sufficiency of tender prices 15 1 Beneath any provisions which may be laid down in the Special Conditions the Contractor shall be deemed to have satisfied himself before submitting his tender as to the correctness and sufficiency of the tender and to have taken
93. ctrical distribution board with bus bar system incoming MCB or MCCB up to 250A outgoing MCBs up to 63A e Electrical distribution boards with bus bar system incoming MCCB up to 250A outgoing 1 2 3 P MCCBs up to 63A 5 1 19 Power distribution enclosures from 250A to 1600A Minimum Requirements e Electrical power distribution enclosure using MCCBs working on standard distribution system with horizontal splitting combs single phase and three phase up to 63A and vertical power combs 2 3 or 4 rows with 125 or 150 spacing terminal blocks splitters up to 400A bus bar supports up to 1600A e Electrical power distribution enclosure using MCCBs working on optimized distribution system with column chassis active rear panels row splitters and MCCB support bases rapid cabling system 5 1 20 Distribution enclosures and cabinets up to 4000A Minimum Requirements e Electrical distribution enclosure with 2 columns and 2 ACBs 4P 2000A one for the main power line and one for the generator line with 4 MCCBs 630A drawout system with motor operator Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 19 of 48 Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 20 of 48 ITEM Qty DESCRIPTION AND REQUIREMENTS Lot 6 ELECTRICAL EQUIPMENT e C
94. d e Envelope A Administrative Compliance e Envelope B Technical Offer e Envelope C Financial Offer and having clearly printed on the front the following identifications e the title of the tender Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum e the name of the Tenderer Italian Egyptian Integrated Technical Education Cluster 10 4 These three envelopes shall be submitted in a single main envelope package This main envelope package should be sealed with adhesive band stamped signed on the closing strips and identified with e the address Education Development Fund 13 Haroun St Dokki Giza Egypt To the Attention of Dr Mohammad Megahed Fayoum ITEC Project Director e the title of the tender Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum e the name of the Tenderer e the sentence in a form equal or equivalent to a 16 Arial capital letter bold font Not to be opened before the tender opening session 10 5 The Envelope B with the Technical Offer should contain inside one separate technical offer envelope for each lot offered These separate envelopes should be sealed and identified with e the title of the tender Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum e name of the Tenderer e Envelope B Te
95. d admitted to the technical evaluation e the Lots that reach a threshold of 70 of the points as indicated in the following article 19 regarding the Scoring System are considered suitable and admitted to the financial evaluation 18 5 The tenders which have been considered suitable for technical evaluation will be assessed from a technical point of view to verify their conformity to the Tender dossier and will be scored based on their relevant technical qualities The criteria for assessment and scoring adopted by the Evaluation Committee will be the following e the technical compliance will be based on the declarations provided by the Tenderer in the technical compliance grid e the origin will be based on the declaration provided by the Tenderer and Italian Egyptian Integrated Technical Education Cluster considering and weighting the items of different origin from the one declared e the compliance to the decision No 768 2008 EC will be based on the declaration provided by the Tenderer and considering and weighting the items that will not be in compliance to such decision e the number of practical exercises considered for the scoring will be based on the declaration provided by the Tenderer and considering and weighting the items included excluded from the list provided in the Technical Specifications Annex E and the ones eventually added by the tenderer e the language of the digital learning resources will be based on the i
96. delivery shall be considered completed when the relevant certificate issued by the Technical Committee and attesting that the goods have been supplied according to the Supply Contract and the invoice s and all documents listed in the Special Conditions have been given to the Contracting Authority or to the Contracting Authority is at both Parties disposal With reference to the goods delivered at the Contracting Authority s factory he shall assume the Consignee s responsibility in the period between the goods storage and the testing 28 7 Materials and goods supplied according to the Supply Contract are totally insured in favour of the Contracting Authority against losses or accidental damages due to manufacturing or acquisition transport storage and delivery as laid down in the Special Conditions Article 29 Verification operations 29 1 Goods can be tested only after prescribed inspections and preliminary tests have been carried out Inspections and tests can be carried out at the delivery place and or at the goods final destination 29 2 During goods delivery and before they are taken over the Technical Committee can a Within injunction terms order the removal from the testing place of the goods that in its opinion are not in conformity with the Supply Contract b Order to replace such goods with new proper equipment c Apart from any proceeding testing or advance payment order to undo and correctly r
97. derers for an extension of this period for 60 days Tenderers agreeing to the request shall not be permitted to modify their tenders and they are bound to extend the validity of their tender guarantee for the revised period of validity of the tender If they refuse without forfeiture of their tender guarantees their participation in the tender procedure will be terminated 7 3 The successful Tenderer shall remain bound by its tender for a further period of 60 days following receipt of the notification of its selection A 8 Language of offers 8 1 The offers all correspondence and documents related to the tender exchanged by the Tenderer and the Contracting Authority must be written in the language of the procedure which is English 8 2 If the supporting documents are not written in Arabic or English a sworn translation into English language must be attached Italian Egyptian Integrated Technical Education Cluster A 9 Information Clarification meeting site visit 9 1 An information clarification meeting will be held on the date stated in Article 2 of these instructions to tenderers in the premises of the Contracting Authority to answer any questions on the tender dossier which have been forwarded in writing or are raised at the meeting Minutes will be taken during the meeting and these will be published on the Contracting Authority web site together with any clarifications in response to written requests which are not addressed dur
98. e Install and check the functioning of sensors to measure position optical encoders proximity sensors angular position sensors steering angle and angle sensor velocity transducers dynamo tachometric alternator tachometric rotational speed sensor angular potentiometer Hall soeed sensor acceleration sensors piezoelectric accelerometer force transducers resistance strain gages load cells pressure sensors differential pressure absolute pressure high pressure level flow magneto inductive microwave calorimeter transducers temperature transducers thermistors thermocouples o air and liquid temperatures Install and check the functioning of actuator system o AC and DC motors o Servo Machine Brushless and stepper control axis o Electro valves o _Electro pneumatic valves o Lights buzzer and other loads Programming the PLC in order to manage the industrial automation systems using different languages LDR STL FCH Read and interpret practical guides e 0000000 0 DIGITAL LEARNING RESOURCES for PLC LAB Digital resources for PLC Lab in technical and professional schools students age 15 18 General Requirements e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e List of digital resources title and description Online e catalogue of electrical products and materials with updates e Documentation
99. e any non substantial modification that the Contracting Authority may see fit provided that the nature of the activity is not fundamentally altered and no additional costs are imposed A 25 Tender Guarantee 25 1 The tender guarantee referred to in Article 3 6 c above must be presented in the form specified in the Annex V and shall remain valid for 120 days after the period of validity of the tender 25 2 Tender guarantees provided by Tenderers who have not been selected will be released not later than 60 days after the signing of the Supply Contract The tender guarantee of the successful Tenderer shall be released on the signing of the Supply Contract once the Performance Guarantee has been submitted 25 3 The Guarantor that provides the Tender guarantee shall commit itself in case of successful selection of the supplier to issue the Performance Guarantee according to the requirements of this Instruction to Tenderers The supplier can provide a commitment letter also issued by another Guarantor different respect the Guarantor who issued the Tender Guarantee A 26 Ethics clauses 26 1 Any attempt by a candidate or Tenderer to obtain confidential information enter into unlawful agreements with competitors or influence the committee or the Contracting Authority during the process of examining clarifying evaluating and comparing tenders will lead to the rejection of its candidacy or tender and may result in administrative penalties 26
100. e default of the Contractor or d necessary for the safety or the proper execution of the contract or any part thereof insofar as such necessity does not arise from any act or default by the Contracting Authority 23 4 The Contractor shall not be entitled to such additions to the contract price unless he notifies the Contracting Authority within thirty 30 days of receiving the order to suspend progress of delivery of his intention to make a claim for them 23 5 The Contracting Authority after consultation with the Contractor shall determine such extra payment and or extension of the period of performance to be made to the Contractor in respect of such claim as it shall be in the opinion of the Contracting Authority fair and reasonable 23 6 If the period of suspension exceeds one hundred and eighty 180 days and the suspension is not due to the Contractor s default the Contractor may by notice to the Contracting Authority request to proceed with the supplies within thirty 30 days or terminate the contract 23 7 Where the award procedure or performance of the contract is vitiated by substantial errors or irregularities or by fraud the Contracting Authority shall suspend performance of the contract Where such errors irregularities or fraud are attributable to the Contractor the Contracting Authority may also refuse to make payments or may recover monies already paid in proportion to the seriousness of the errors irregularitie
101. e following examples of practical exercises e Basic methods separation processes e Air gases and their properties e Acids bases and salts e Metals and non metals e Chemical activity and reactions e Crystallization from aqueous solutions e Acid base titration e Chemical analysis of environmental water 3 2 2 12 Education Kit for Physical Chemistry Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Electrochemical processes e Particle motion and energy e Water dissociation e Conductivity in liquids 3 2 3 6 Education Kit for Chemistry of Soap and Detergents Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Surface tension and surfactants e Hydrophobic and hydrophilic effects e Washing and cleaning effects e Washing agents and environment 3 2 4 3 Education Kit for Lubricant Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Friction Fluid lubricant Viscosity and viscosity index Lubricants flow and properties Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 7 of 48 3 2 5 3 Education Kit for data acquisition system Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e acquisition and display of voltage current e acqui
102. e information on signed grids will prevail 11 6 The Envelope C Financial Offer should include the Annex Price List only A 12 Pricing 12 1 Tenderers must quote prices for delivery installation training and after sales services to the place of destination in accordance with the conditions stated in these instructions to tenderers excluding all duties and taxes applicable to their importation and VAT but including all duties taxes and other burden generated outside the country of the Contracting Authority In case the Contracting Authority will not be able to provide in due time means of exemptions from duties and taxes applicable to their importation into the country the Contracting Authority will add these costs to the price of the contract 12 2 The prices for the contract are fixed and not subject to revision they include all the supplies with all the accessory charges even if not specifically mentioned in the Contract necessary to complete the activities in terms of both quality and quantity 12 3 Tenderers shall be deemed to have satisfied themselves before submitting their tender as to their correctness and sufficiency to have taken account of all that is required for the full and proper performance of the contract and to have included all costs in their rates and prices A 13 Additional information 13 1 The tender dossier should be clear enough to avoid tenderers from having to request additional information du
103. e practical exercises requested Up to 100 of maximum number of points allocated At least 80 of the practical exercises requested Up to 75 of maximum number of points allocated At least 70 of the practical exercises requested Up to 50 of maximum number of points allocated At least 60 of the practical exercises requested Up to 25 of maximum number of points allocated Less than 50 of the practical exercises requested Zero Points Scores will depend upon offered languages as per the following weight In Arabic 40 Italian 40 English 20 of maximum allocated points Content of Digital Learning Resources The maximum score will be assigned to the tender with the content that matches the practical exercises Scores of other tenders are scored proportionally according to a descending order of match 19 1 The total points gained by each Tenderer for each lot are calculated based on Technical Evaluation The tendered lots achieving less than 70 points will be rejected and will not enter into the financial evaluation 19 2 The Financial Technical Indicator for each tendered lot is calculated as the price offered by a Tenderer divided by the total points acquired in the technical evaluation Italian Egyptian Integrated Technical Education Cluster EGP per point The least value for the Financial Technical Indicator will determine the winning Tenderer A 20 Award notice 20 1 The
104. e used in ITALIAN technical and professional schools students age 15 18 e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e Documentation in Italian Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 12 1 1 Chemistry Digital Learning Resources Topics covered Carry out not less than 50 of the following examples of topics e Trasformazioni fisiche e chimiche della materia Le leggi fondamentali della chimica Modelli atomici Gli stati della materia Formule chimiche Massa atomica e mole Soluzioni Configurazione elettronica La tavola periodica legami chimici Struttura delle molecole VSEPR Stati della materia e legami chimici Classificazione e nomenclatura dei composti inorganici Le reazioni chimiche Stechiometria Equilibrio chimico Acidi e basi Ossidoriduzioni Fondamenti di elettrochimica Fondamenti di chimica organica composti organici gruppi funzionali Materiali di interesse tecnologico e applicativo Nuovi materiali e biomateriali Chimica ambientale 12 1 2 Mathematics Digital Learning Resources Topics covered le operazioni rapporti e proporzioni numeri interi razionali e irrazionali I
105. earning resources is documented Italian Egyptian Integrated Technical Education Cluster
106. electrical installations Complete kit with the most essential tools for electrical electronic with handles covered in insulating material insulation 1000V and for heavy duty operations Minimum Requirements e Set of 4 different screwdrivers for cross head Philips screws ISO 8764 e Set of 4 different screwdrivers for slotted head screws ISO 2380 e Wire cutter for 2 5 and 4 mmq insulated cables e Crimper for terminal and connectors on 2 5 and 4 mmq cables e Long nose plier small size e Set of 8 5 6 7 8 9 10 11 and 12 size combination wrenches e Scissor for electrician 5 1 5 10 Setofcables 2 5 mmq Electrical cables compliant with IEC 60502 Minimum Requirements e 300m yellow green Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 17 of 48 300m blue 100m red 100m black e 100m brown 5 1 6 5 Set of cables 4 mmq Electrical cables compliant with IEC 60502 Minimum Requirements e 300m yellow green e 300m blue e 100m red e 100m black e 100m brown 5 1 7 20 Setoflugs for 2 5 mmq electrical cables Lugs for electrical cables coated with tin or copper Minimum Requirements e 200 ring terminal e 200 spade terminals e 200 pin insulated connector e 200 female disconnects open barrel e 200 male disconnect plate 5 1 8 10 Setoflugs for 4 mmq electrical cables Lugs for electrical cables coa
107. elivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical Domestic Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment WORKBENCHES for PLC Student vertical workbench for PLC The student workbench will have on the side a PCs desk The student workbench should accommodate two students working at the same time ensuring comfortable and safe operations The student workbench should be equipped with AC and DC cockpit digital multi meter with cables and terminals and other instruments devices and connections as required by the exercises Minimum Requirements e Rigid and solid structure in metal tubular profile Top made of highly compressed multi layer fine chipboard and resistant to scratches Vertical frame to fix panels for practical exercises with easy assembling and removal 4 drawers with lock under the top Power supply cockpit with safety and control element should include at least e Safety and control element 400V AC 230V AC 24V DC e Key switch e On Off switches e Emergency stop e Circuit Breaker 3x16A disconnection current 30mA earth protection e Power supply cockpit with digital multi meter e
108. ender in our own right We confirm that we are not tendering for the same contract in any other form We are not in any of the situations excluding us from participating in contracts which are listed in Article 3 5 of the Instructions to Tenderers In the event that our tender is successful we undertake if required to provide the proof under the law of the country in which we are established that we do not fall into these exclusion situations The date on the evidence or documents provided will be no earlier than 1 year before the date of submission of the tender and in addition we will provide a statement that our situation has not altered in the period which has elapsed since the evidence in question was drawn up We also undertake if required to provide evidence of the financial and economic standing and the technical and professional capacity according to the selection criteria for this call for tender specified in the Instruction to Tenderers We also understand that if we fail to provide the proof evidence required within 30 calendar Italian Egyptian Integrated Technical Education Cluster days after receiving the notification of award or if the information provided is proved false the award may be considered null and void We also declare that e we have well examined the Special Conditions the General Conditions the Technical Specifications and any other documents corresponding to the Offer and we consider these documents
109. enter the Tender The deadline for receiving queries from tenderers is Sunday 17 3 2013 Bids will be opened on Wednesday 27 3 2013 at 12 00 noon and all bids have to be submitted in sealed envelopes to the above EDF office not later than this date and time Egyptian Law 89 for year 98 on bids and tenders and its executive regulations terms and conditions together with the document of this tender complement this announcement Bidding documents and further details can be found at www edf edu eg Integrated Technical Education Cluster at Fayoum Page 2 of 2 mi eall paghi 3 gaina Education Development Fund C nasviluppo AL Gud duly A INSTRUCTIONS TO TENDERERS plal paia Gales Reference Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum within the framework of the Italian Egyptian Debt for development SWAP program Contracting Authority Education Development Fund 13 Haroun St Dokki Giza Egypt website www edf edu eg Contact person Dr Mohamed Megahed Fayoum ITEC Project Director Place of destination Demo Technical Secondary School Fayoum Egypt In submitting its tender the Tenderer accepts in full and without restriction the special and general conditions governing this Tender as the sole basis of this tendering procedure whatever its own conditions of sale may be which it hereby waives Tenderers are expected to ca
110. epeat any work which is judged not in compliance with the Supply Contract as far as materials manufacturing or engineering are concerned and for which the Contractor is responsible d Decide that a delivered item or the materials used by the Contractor is or are not Italian Egyptian Integrated Technical Education Cluster in line with the Supply Contract or that the goods or part of them do not satisfy the requirements stated in the Supply Contract 29 3 The Contractor shall immediately repair the indicated defects at his own charge In case of default the Contracting Authority has the right to engage or pay other people for repairing such defects and claim back to the Contractor all the relevant expenses or deduct such expenses from the amounts due to the Contractor 29 4 Goods that do not comply with the required quality are refused and can be marked with a special sign The sign shall be such not to damage and change their commercial value The Technical Committee shall fix a date and settle that within that same date the refused goods shall be removed from the testing place at the Contractor care on the contrary goods will be officially removed at the Contractor charge and risk Goods manufactured with refused materials will be refused 29 5 What stated in this article does not compromise the Contracting Authority s capacity to claim his rights according to Article 21 of these General Conditions nor does it free in any way the Con
111. er this Contract shall cease at most eighteen 18 months after the end of the period of execution of the tasks unless the Contract is terminated in accordance with these General Conditions 26 9 Unless otherwise stipulated in the Special Conditions contracts shall be at fixed prices which shall not be revised 26 10 The Contractor undertakes to repay any amount paid in excess of the final amount due to the Contracting Authority within forty five 45 days of receiving a request to do so Should the Contractor fail to make repayment within the deadline set by the Contracting Authority the Contracting Authority may unless the Contractor is a Italian Egyptian Integrated Technical Education Cluster government department or public body of a Member State of the Community increase the amounts due by adding interest 26 11 At the rediscount rate applied by the European Central Bank to member banks On the first day of the month in which the time limit expired plus three and a half percentage 3 5 points The default interest shall be incurred over the time which elapses between the date of the payment deadline set by the Contracting Authority exclusive and the date on which payment is actually made inclusive Any partial payments shall first cover the interest thus established Amounts to be repaid to the Contracting Authority may be offset against amounts of any kind due to the Contractor This shall not affect the Parties right to
112. eramic epoxy resin Self supporting fume extractor arm for chemical application Integrated taps and control valves for all utilities Equipped for fume extraction connected to a central fume extraction system e Proper ventilation for the fume hoods and general lab areas 3 1 2 24 Laboratory stool for Students Ergonomic and comfortable laboratory stool Minimum Requirements e Rigid without rotation wheels and adjustable elements e Heavy duty strong and secure construction 3 1 3 2 Double door chemical reaction unit Unit to be used to implement reactions producing vapours or thermal reactions Minimum Requirements Dimension about 180Hx60Lx95W cm Heavy duty and of strong and secure construction Resistant to fire and chemicals Lockable Equipped for fume extraction connected to a central fume extraction system 3 1 4 1 Central fume extraction system for chemistry lab All the extractor arms integrated on the special desk for chemistry item 3 1 1 and the double door ventilated chemical storage units item 3 1 3 should be connected to the central fume extraction system Minimum Requirements e Maximum noise level as required by International Standards Maximum face velocity as required by International Standards Dimensions as required by the layout of the Lab proposed by the bidder e __ Filters as required by chemical substances provided by the bidder Integrated Technical Education Cluster at Fayoum A62 E Technical
113. ercises e Op Amp Operational Amplifier main data sheet characteristics feedback and non feedback gain Zin Zout slew rate CMRR bandwidth vs frequency Classical linear configurations e Inverting Non inverting amplifiers e Adder e Substractor Classical non linear configurations e Integrator e Differentiator e Comparator e Sinusoidal oscillators Wave forms generators e Monostable Astable multivibrators e Filters with Op Amp e active LPF BPF HPF filters 11 2 3 Amplifier with transistor kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Transistors the small signal parameters mathematical model and the n parameters model e The CE amplifier and the main parameters bias circuit and required components Zin Zout and Vgain and Igain The strain capacities and their effects on the amplification Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 35 of 48 bandwidth e Study of the classical circuits configurations emitter follower Darlington Cascode and Bootstrap connections The h parameters of the connections e Amplifiers coupling methods direct coupling RC net transformer coupling Determining the required coupled stages for a total amplification gain Use of the
114. ercom and the phone system Technical Requirements experimental panel PANEL The size should be fully compatible with the vertical working positions of the a m unit Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 13 of 48 Equipped with sockets for components of the antitheft system rear part of the panel components connected with plastic tubes with holes in correspondence of components to be installed support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panel e 1 BW CCD outdoor 2 wire video camera with IR lighting 2 calling buttons e 1 BW screen wall type video intercom indoor 2 wire with lock opening screen mode switching pushbuttons e 1 3 5 color display wall type video intercom 2 wire including lock opening screen mode switching pushbuttons 1 2 wire video adapter 1 indoor CCD sensor color camera 2 wire digital systems 1 4 Inputs 4 outputs audio video node 1 PABX 1 external public network line 8 outputs indoor extensions complete with interface between the PABX and the 2 wire video intercom systems and network terminator with 9 jacks RJ 11 for quick connections Including not less than 4 impulse multi frequency phone sets with RJ 11 a 12 V light for s
115. fety terminals This main line should include EPB Emergency Push Button with mechanical lock and 1 4 turn to unlock key switch and min voltage coil protection e 1 AC low voltage line 12 24 V 4 A single phase line overload and short circuit protection e 1 DC voltage line 12 0 12 VDC 2 A e Operating and maintenance manuals Technical requirements TRMS Digital multimeter e 22000 counts Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 9 of 48 Auto Manual Ranging 46 segments analogue bar True RMS measures DC voltage 220 mV to 1000 V AC Voltage 220 mV to 750 V DC Current 220 microA to 10 A AC Current 220 microA to 10 A Fuse protection Resistance 220 ohm to 220 Mohn 7 ranges Capacitance 25 nF to 220 mF Frequency 10 Hz to 220 MHz Special Functions diode test Continuity Temperature Duty Cycle Transistor hFE test Data Hold Peak Hold RS 232C 24 Stool for Students Ergonomic and comfortable stool without arms and according to the height of the benches Technical requirements Rigid without rotation wheels and adjustable elements Heavy duty strong and secure construction Sliding door storage unit Sliding door storage unit of coordinated design with the workbench to accommodate about 12 panels with practical exercises under completion Technical Requirements Dimension about
116. functions Sensors for detecting final position Sensors for pressure measurement Sensors for flow measurement Detection of objects in industrial practice Switching characteristics of proximity sensors hysteresis Connection technology two wire three wire and four wire Inductive sensors Construction and manner of functioning Optical Capacitive Ultrasound sensors Servo machine brushless and stepper control axis Digital resources in Servo controllers for technical and professional schools Minimum Requirements e Setof 24 licenses e Cabling and control electrical motors e Cabling and control servo machines e Cabling and control step motors Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 48 of 48 F ANNEXES al ANNEX PRICE LISTE e i ante 2 Il ANNEX DELIVERY SCHEDULE gi ccactcctcpactcet ceaeent aaa 3 Ill ANNEX PERFORMANCE BANK GUARANTEE FORMAT 4 IV ANNEX ADVANCE BANK GUARANTEE FORMAT i 5 V ANNEX TENDER BANK GUARANTEE FORMAT i 6 VI ANNEX RETENTION MONEY BANK GUARANTEE FORMAT 8 VII ANNEX TENDER SUBMISSION FORM 9 VII 1 Tenderer s identification i 9 VII 2 Contact person for this tender 10 VII 3 Economic and financial Gapacity so edera 10 VIA Staff resours renen era aa 11 NI
117. g circuit Installing and cabling auxiliary relay 2 auxiliary NO contacts 2 NC Installing and cabling lamp socket for warning lights with diameter of 22 mm of different colours Installing and cabling pushbutton lock Installing and cabling multiple control points Installing and cabling electronic time relays Installing and cabling overcurrent release and motor protection switch Installing and cabling three phase socket Installing and cabling main and control circuit Installing and cabling protective interlocking Installing and cabling reversing contactor circuit Installing and cabling reversing contactor circuit with automatic star delta starting Installing and cabling wire boxes for 4 button operators lamp socket Installing and cabling a contactor and separate control of two contactors Installing and cabling a remote control reverser with block on pushbuttons and with timer e Installing and cabling impulse control of a contactor and separate control of two contactors Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 27 of 48 Technical Requirements experimental panels e painted or galvanized steel frame experimental panel with metal strips and hinges to be installed vertically in the students workbench to be used for installing the components e Painted or galvanized steel pierced panel with metal strips and hinges to be installed
118. gainst presentation of the following documents e Certificate of full receipt of the above mentioned sum signed by the Supplier e Retention Money Guarantee as per Annex VI for the same amount in favour of the Contracting Authority The 10 Retention Money Guarantee will be released upon presentation of the Certificate of Final Testing issued and signed by the Contracting Authority after the expiring of the Warranty Period In case the Certificate of Final Testing is not issued for reasons not due to the Contractor the Retention Money Bond shall be considered implicitly released after a number of days from the date of Certificate of Conformity at final destination and of delivery calculated as follows date of Certificate of Conformity at Final Destination and of Delivery 730 warranty days 90 days for the issuing of Certificate of Final Testing 90 banking days and after proper notice to the Contracting Authority All Bank commissions and fees charged outside the Egyptian boundaries shall be borne by the Contractor The expiring date of validity of the letter of credit shall consent the Contractor to be able Italian Egyptian Integrated Technical Education Cluster to present all documents for the payment of the balance Article 16 Packaging for delivery 16 1 The Supplier shall bear all risks concerning the goods until provisional acceptance at destination according to the IncoTerms clause agreed in this contrac
119. ges or termination for default if and to the extent that his delay in performance or other failure to perform his obligations under the contract is the result of an event of force majeure Nor notwithstanding the provisions of Articles 27 and 36 shall the Contracting Authority be liable for the payment of interest on delayed payments for non performance or for termination by the Contractor for default if and to the extent that the Contracting Authority s delay or other failure to perform its obligations is the result of force majeure 37 4 If either Party considers that any circumstances of force majeure have occurred which may affect performance of its obligations it shall promptly notify the other Party giving details of the nature the probable duration and the likely effect of the circumstances Unless otherwise directed by the Contracting Authority in writing the Contractor shall continue to perform his obligations under the contract as far as is reasonably practicable and shall employ every reasonable alternative means to perform any obligations that the event of force majeure does not prevent him from performing The Contractor shall not employ such alternative means unless directed to do so by the Contracting Authority 37 5 If the Contractor incurs additional costs in complying with the Contracting Authority s directions or using alternative means under Article 37 4 the amount thereof shall be certified by the Contracting Authority
120. get breakdown were too high or too low 22 4 Save where Article 22 2 provides otherwise prior to issuing an administrative order for a variation the Contracting Authority shall notify the Contractor of the nature and form of that variation As soon as possible after receiving such notice the Contractor shall submit to the Contracting Authority a proposal containing a a description of the tasks if any to be performed or the measures to be taken and a performance programme b any necessary modifications to the performance programme or to any of the Italian Egyptian Integrated Technical Education Cluster Contractor s obligations under the contract c any adjustment to the contract price in accordance with the rules set out in Article 22 22 5 Following the receipt of the Contractor s submission referred to in Article 22 4 and providing that the variation has not exceeded twenty five percent 25 the Contractor is expected to carry out the required variation within the deadlines provided by the Contracting Authority If the Contracting Authority decides that the variation is to be carried out he shall issue an administrative order stating that the variation is to be made at the prices and under the conditions given in the Contractor s submission referred to in Article 22 4 or as modified by the Contracting Authority in accordance with Article 22 6 22 6 The prices for all variations ordered by the Contracting Authority in accord
121. gi in cerca d autore Pirandello La verit Cos se vi pare III 7 9 Pirandello Il treno ha fischiato Novelle per un anno Svevo Il fumo La coscienza di Zeno III Svevo La morte del padre La coscienza di Zeno IV Svevo Il funerale sbagliato La coscienza di Zeno VII Svevo La catastrofe finale La coscienza di Zeno VIII Saba La capra Saba A mia moglie Saba Trieste Ungaretti Veglia L Allegria Ungaretti In memoria L Allegria Ungaretti fiumi L Allegria Ungaretti San Martino del Carso L Allegria Ungaretti Soldati L Allegria Ungaretti Natale L Allegria Fenoglio La spia Il partigiano Johnny Quasimodo Alle fronde dei salici Montale Non chiederci la parola Ossi di seppia Montale Meriggiare pallido e assorto Ossi di seppia Montale Spesso il male di vivere ho incontrato Ossi di seppia Montale Ti libero la fronte dai ghiaccioli Le occasioni Montale La casa dei doganieri Le occasioni Calvino Sotto le rosse mura di Parigi Il cavaliere inesistente Calvino Non scender pi Il barone rampante Calvino Isaura e Smeraldina Le citt invisibili e IV Calvino In una rete di linee che si allacciano Se una notte d inverno un viaggiatore Sciascia Western di cose nostre Il mare colore del vino Tabucchi La scelta del coraggio Sostiene Pereira Camilleri Il patto Un mese con Montalbano 12
122. gress of the performance of the contract does not conform to the programme the Contracting Authority may instruct the Contractor to revise the programme and submit the revised programme for approval Article 14 Contractor s drawings 14 1 If the Special Conditions so provide the Contractor shall submit to the Contracting Authority for approval a the drawings documents samples and or models according to the time limits and procedures laid down in the Special Conditions b such drawings as the Contracting Authority may reasonably require for the performance of the contract 14 2 If the Contracting Authority fails to notify his decision of approval referred to in Article 14 1 within the deadlines referred to in the contract or the approved programme of performance such drawings documents samples or models shall be deemed to be approved on expiry of the deadlines If no deadline is specified they shall be deemed to be approved thirty 30 days after receipt 14 3 Approved drawings documents samples and models shall be signed or otherwise identified by the Contracting Authority and may only be departed from on the Contracting Authority s instructions Any of the Contractor s drawings documents Italian Egyptian Integrated Technical Education Cluster samples or models which the Contracting Authority fails to approve shall immediately be modified to meet the requirements of the Contracting Authority and resubmitted by the Contra
123. harge After or normally jointly the Certificate of conformity at final destination and of delivery has been issued the Consignee produces a Declaration of Delivery location Suitability attesting that the delivery location agreed in the Contract is ready to receive the commodities and for having them assembled and installed on site This last certificate allows the Contractor to assemble and install the goods and obtaining the subsequent Certificate of Provisional Acceptance The Contractor shall pay attention to respect the timing for shipment amp delivery to the selected Egyptian seaport Upon arrival to the Egyptian territory any delay from the arrival date at the seaport to the delivery date at the final destination due to custom administrative and governmental procedures shall be borne by the Contracting Authority The importation shall be considered duty free and any taxes custom duties and expenses relevant to the import of goods within the Commodity Aid Programme into the Arab Republic of Egypt as per Article 3 of the Contract are at Contracting Authority s charge After delivery and onsite installation the Contractor receives the Certificate of Provisional Acceptance by the Consignee through the Contracting Authority Article 31 Warranty obligations 31 1 The Contractor shall warrant that the supplies are new unused of the most recent models and incorporate all recent improvements in design and materials unless otherwise
124. he clauses 3 1 3 2 and 3 3 i Tenderer s place of establishment Statement issued from a Chamber of Commerce ii Representative office or place of establishment in Egypt Statement issued from a Chamber of Commerce iii Authorisation to perform activities related to the supply for which the tenders are submitted Statement issued from a Chamber of Commerce c Tender guarantee Annex V for a value not less than the sum of the value requested for each lot the Tenderer is submitting in his offer d Authorized signature certificate An official document statutes power of attorney notary statement etc proving that the person who signs on behalf of the Tenderer is duly authorized to do so e Bank account Bank letter stating all the information of the Tenderers bank account into which payments should be made f Letter of reference issued by a primary Bank or Financial Institution in the state of the Tenderer attesting the creditable conduct of the Tenderer g UNI EN ISO 9001 2000 updated certification of the Tenderer h Statement regarding any information about any legal proceedings or disputes involving the Tenderer at the present time such information will be limited to the questions directly concerned with the award or the realization of the Supply Contract Italian Egyptian Integrated Technical Education Cluster A 4 Origin of the supplies to be provided 4 1 The supplies should preferably be manufactured i
125. hnical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 30 of 48 interactive whiteboards theory simulations exercises and self evaluation tests e List of digital resources title and description Online e catalogue of electrical products and materials with updates Documentation in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 9 2 1 Supervision solution hardware and software Application for the integration of data monitoring and control of all the systems Minimum Requirements e Web based software for the monitoring of the electrical management system from internet Security access password protection from Internet both local and remote e The photovoltaic monitoring system has to work both stand alone and integrated in the home building automation web based supervisor management of the loads and logic control of the energy produced e Redundant configuration to ensure highly reliability Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 31 of 48 ITEM Qty 9 DESCRIPTION AND REQUIREMENTS Lot 10 PHOTOVOLTAIC KIT e The KITs will be installed in the PLC and Automation LAB
126. i theft system inimum Requirements software Upload applications Capture save and print select entire window on the board OS Microsoft Windows and Mac OS X Manuals guidelines technical documentation demos and tutorials Annex B STUDENT PCS Set of 24 Desktop computer Minimum Requirements Processor Second generation Intel Core i5 2400 6MB Cache Memory RAM 8GB DDR3 1333MHz SDRAM Hard Drive 1 TB 7200rpm SATA hard drive Graphics 2GB DDR3 graphic card HDMI DVI VGA via adapter Optical drive Blu ray player amp SuperMulti DVD burner Audios 5 1 audio board line in line out mic in mic out Networking Ethernet card 10 100 1000 Mbps Inputs Keyboard English and Arabic layout optical mouse 3 buttons Ports USB2 0 USB3 0 15 in 1 memory card reader Operating System Windows 7 Professional Linux Preinstalled software Internet Security Suite Burglar alarm anti theft system Set of 24 Monitors LCD 21 5 Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 45 of 48 Minimum Requirements e Colour LCD display 21 5 LED e Resolution 1920x1080 native e Proportion 16 9 Annex C PLC and AUTOMATION WORKSHOP e Dimensions of the PLC and Automation Workshop are about 12m w x 11 5m I layout can be requested to the contracting authority General Requirements e The items of this lot should be d
127. ice or place of establishment in Egypt Ill Authorisation to perform activities related to the supply 3 6 c Tender guarantee Annex V 3 6 d Authorized signature certificate 3 6 e Bank account 3 6 f Credible conduct of the Tenderer 3 6 g UNI EN ISO 9001 2000 3 6 h On going legal proceeding and disputes Name Authorized signature Date Stamp of the tenderer Italian Egyptian Integrated Technical Education Cluster XI 2 ANNEX TECHNICAL COMPLIANCE ASSESSMENT GRID Supply of electrical laboratory equipment Tender Contract BE 4 ae TRIEP Tenderer s Lot No 3 services and digital learning resources for envelope Title name and title the ITEC in Fayoum number n sci Tenderer s Ref to Minimum requirements Yes No Notes Descriptions Features of the tenderer innate Name Authorized signature Date Stamp of the tenderer the Tenderer should include here the list of the minimum requirements indicated in the Technical Specifications Annex E the Tenderer should indicate for each requirement if he complies Yes or not No the Tenderer should provide some key information in case of non compliance to the requirement the Tenderer should indicate the annex where characteristics data and information of the supply are described Italian Egyptian Integrated Technical Education Cluster X1 3 ANNEX ORIGIN AND COMPLIANC
128. imulating electric lock 230 Vac self protected electronic power supply for 2 wire digital video interphone systems 4 2 7 Fire fighting alarm kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises Install set up and detect faults for sensors used in fire fighting control rate of rise temperature sensor optical smoke and gas leakage sensors Install set up and detect faults for actuators used in fire fighting control manual ON pushbuttons blinkers sirens and cut fire doors firewalls Install set up and detect faults for the centralized fire fighting programmable boards functions carried out by the electronic control units Typical programming according to the building house distribution Install set up and detect faults for a circuit combining the above mentioned sensors Technical Requirements experimental panel PANEL The size should be fully compatible with the vertical working positions of the a m unit Equipped with sockets for components of the antitheft system rear part of the panel components connected with plastic tubes with holes in correspondence of components to be installed support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panel e 1 electronic control board
129. ing the meeting at the latest 5 calendar days before the deadline for submission of tenders All costs of attending this meeting must be met by the tenderers 9 2 No site visit is foreseen A 10 Submission of tenders 10 1 Tenders must be received before the deadline indicated in the timetable as per article 2 of the Instructions to Tenderers local time of the Contracting Authority They must include all the documents specified in these Instructions and they shall be submitted to the following address Education Development Fund 13 Haroun St Dokki Giza Egypt to the Attention of Dr Mohammad Megahed Fayoum ITEC Project Director and the envelope shall have the following sentence in bold and highly visible font DO NOT OPEN UNTIL THE TENDER OPENING MEETING 10 2 All tenders must be received by international registered letter with acknowledgement of receipt or hand delivered with a signed in exchange receipt by the protocol Officer of the Contracting Authority The legitimate receipt in order to be valid as tender evidence shall contain the name and address of the Sender the name and address of the Receiver the references of the Tender the date the time the protocol number and the readable signature of the receiver 10 3 All tenders including annexes and all supporting documents must be submitted in three separate sealed envelopes packages signed and stamped on the closing strips and sealed with adhesive band name
130. ing to the following terms and conditions An Advance Payment for an amount up to 25 of the contract price may be recognised against the following documents e Advance Payment Guarantee as per Annex IV only issued by a first bank and not by an insurance company nor by a minor bank for the same amount in favour of Contracting Authority Such guarantee shall be released within 45 forty five days from the date of the Certificate of Conformity at final destination and of delivery issued by the Contracting Authority In case of failure in issuing the Certificate of Conformity at final destination and of delivery the Contracting Authority shall have the right to have extended the advance payment guarantee for a period of minimum six months to allow the provider to remedy In case such request is not fulfilled by the Provider passed 30 additional days from the date of such request the Person in Charge shall have the right to ask the Guarantor Bank to pay on behalf of the Provider the amount requested In this last circumstance the Contracting Authority shall have the right to decide to wait for a new Advance Payment Guarantee from the same provider or to claim the rightful withdraw from the contract and proceed by contracting a new Tenderer according to the scoring list or launching a new Tender It is understood that the Advance Payment Guarantee shall remain valid for a period Italian Egyptian Integrated Technical Education Cluster
131. into lots together with the number of copies specified in the Instruction to Tenderers The attachments to this submission form i e declarations statements proofs may be in original or copy If copies are submitted the originals must be dispatched to the Contracting Authority upon request For economical and ecological reasons we strongly recommend that you submit your files on paper based materials no plastic folder or divider We also suggest you use double sided print outs as much as possible An economic operator may where appropriate and for a particular contract rely on the capacities of other entities regardless of the legal nature of the links which it has with them It must in that case prove to the Contracting Authority that it will have at its disposal the resources necessary for the performance of the contract for example by producing an undertaking on the part of those entities to place those resources at its disposal Such entities for instance the parent company of the economic operator must respect the same rules of eligibility and notability that of nationality as the economic operator VII 1 Tenderer s identification Name Denomination of Tenderer Country of registration Address Telephone land line Fax Telephone mobile e mail Name Denomination of the representative in Eqypt Address Telephone land line Fax Telephone mobile e mail Italian Egyptian Integrated Technical
132. ional legislation or regulations b They are the subject of proceedings for a declaration of bankruptcy for winding up for administration by the courts for an arrangement with creditors or for any similar procedure provided for in national legislation or regulations Italian Egyptian Integrated Technical Education Cluster c They or their directors or partners have been convicted of an offence concerning professional conduct by a judgement which has the force of res judicata d They are guilty of grave professional misconduct proven by any means that the Contracting Authority can justify e They have not fulfilled obligations related to the payment of social security contributions in accordance with the legal provisions of the country where they are established f They have not fulfilled obligations related to the payment of taxes in accordance with the legal provisions of the country where they are established g They are guilty of serious misrepresentation in supplying the information required by the Contracting Authority as a condition of participation in a tender procedure or contract h They are in one of the situations allowing exclusion referred to in the Ethics Clauses article 27 in connection with the tender or contract Tenderers must provide joint to their applications a sworn statement that they do not fall in any of the categories above listed Tenderers who have been guilty of making false declarations wi
133. ions were requested for the submissions from any Tenderers otherwise delete the entire paragraph included the table Italian Egyptian Integrated Technical Education Cluster X 3 4 Technical evaluation The Evaluation Committee used the Technical evaluation grids included in the tender dossier a technical compliance b origin of the goods c compliance to decision 768 2008 EC d practical activities e learning resources to assess evaluate and score each items of the lots offered by the Tenderers with the technical requirements of the tender dossier The completed Technical evaluation grids are attached With the agreement of the other Evaluation Committee members the Chairperson wrote to the following Tenderers whose tenders required clarification offering them the possibility to respond by lt within a reasonable time limit fixed by the evaluation committee gt all correspondence is attached in the Annex indicated Tender envelope Tenderer s name Summary of exchange of correspondence No After discussing the individual conclusions of the Evaluators the Evaluation Committee concluded that the following tenders were technically compliant and scored as following Lot No and title Points scored Tender envelope No Tenderer s name a b c d e total Keep the paragraph if clarifications were requested for the submissions from
134. is liable under the guarantee due to the Contractor s default under the contract in accordance with the terms of the guarantee and up to the value thereof The guarantor shall without delay pay those sums upon demand of the Contracting Authority and may not raise any objection for any reason whatsoever Before making any claim under the performance guarantee the Contracting Authority shall notify the Contractor stating the nature of the default in respect of which the claim is to be made 11 7 Except for such part as may be specified in the Special Conditions in respect of after sales service the performance guarantee or what remains shall be released within seven 7 working days of the issue of the final acceptance certificate Such Performance Bond shall be delivered to the Contracting Authority prior the Contract signature Article 12 Insurance 12 1 An insurance policy may be required to cover the carriage of supplies the conditions of this insurance policy may be specified in Article XII of the Special Conditions which may also specify other types of insurance to be taken out by the Contractor 12 2 Notwithstanding the Contractor s insurance obligations under Article 12 1 the Contractor shall bear sole liability for and indemnify the Contracting Authority against any claims by third parties for damage to property or personal injuries arising from the Italian Egyptian Integrated Technical Education Cluster execution of the cont
135. ity or Authority which has power of decisions Successful Tenderer the Tenderer selected following a contract award procedure Supplier Contractor the successful Tenderer once the contract has been signed by all parties concerned Supply contract a contract between a Supplier and the Contracting Authority for the purchase lease hire or hire purchase with or without an option to buy of goods It may also cover such tasks as installation servicing repairs training and after sales service etc Italian Egyptian Integrated Technical Education Cluster Technical Committee the Committee Gempany in charge to certify the conformity of services rendered with regard to the shipment transport and the final delivery of supplies and the due compliance with the purchasing procedures managed by the Contracting Authority Tender price the sum stated by the Tenderer in his tender for carrying out the contract Tenderer any natural or legal person or group of such persons submitting a tender with a view to concluding a contract Time limits the periods which shall begin to run from the day following the act or event which serves as their starting point Should the last day of the period fall upon a non working day in the country of the Contracting Authority the period shall expire at the end of the first working day following the last day of the period Italian Egyptian Integrated Technical Education Cluster IX ANNEX LIST OF INCOTE
136. ixed expiry term will be taken into consideration On receiving the tenders the bundle will be registered according to the order of arrival in the relevant register see Annex XI summary of tenders Registration number date and time of arrival will be hand written on the bundle The bundle will remain sealed and will be kept in a safe place until the opening session 17 3 During the public opening of the Tenders the Tender Opening Committee after verification that the bundles are in conformity to the above Article 10 will proceed to the opening of the bundles reading the Tenderer s name and drawing up the tender opening report see Annex XI For all the tenders the following procedure shall be followed 1 Bring the tenders to the opening session venue 2 Record the withdrawal notices and keep them closed and stored in a safe location the corresponding tenders 3 Record tender alteration communications and mark such tenders in order to include consider the alterations 4 Announce any detail information that the Tender Opening Committee deems necessary for the opening section 5 Verify the existence of 3 three different separate and sealed envelopes inside the bundle named Envelope A Administrative Compliance Envelope B Technical offer Envelope C Financial offer and record the status of envelopes 17 4 The Evaluation Committee will arrange meeting s separate from the opening session t
137. l delivery schedule Any delivery date offered by the Tenderer which postpones the above mentioned delivery date shall be considered void by the Contracting Authority and the offer will be accepted within the maximum terms allowed by this article 1 3 The supplies must comply with the technical specifications set out in the tender Italian Egyptian Integrated Technical Education Cluster dossier Section E technical specifications and conform with the plans quantities models samples measurements and other instructions Tenderers are not authorized to tender for a variant in addition to the present A 2 Timetable DATE TIME Tender publication date 23 02 2013 Deadline for submission of tenders 27 03 2013 12 00 Information Clarification meeting 17 03 2013 12 00 Deadline for request for any clarifications from the Contracting Authority TASSO ee Last date on which clarifications are issued by the Contracting Authority 2003 2013 Tender opening session 27 03 2013 12 00 Notification of award to the successful At most 30 days after 7 Tenderer deadline for tenders At most 60 days after Contract signature deadline for tenders All times are in the time zone of the country of the Contracting Authority The Tenderers shall be represented by a legal representative with a power of attorney for each public opening of the envelope A B and C The opening date and the other
138. l Tender 4 2013 Integrated Technical Education Cluster at Fayoum Page 21 of 48 ITEM Qty 6 DESCRIPTION AND REQUIREMENTS Lot 7 ELECTRONIC MOTOR DRIVERS e Dimensions of the Electrical Industrial Installation Workshop are about 12m w x 11 5m I layout can be requested to the contracting authority e Computer for the teacher and intelligent board will be provided by the Contracting Authority see Annex A General Requirements e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical Industrial Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment 7 1 Qty WORKBENCHS 7 1 1 6 Student vertical workbench The unit should be the support and should include boards panels and tools common to all the educational kits to develop a set of practical exercises referred to the following subjects e practical exercises to study diodes configurations e practical exercises to study SCR configurations e practical exercises to study MOSFET drive configurations e practical exercises to study all the classical SCR controlled rectifier configuration circuits
139. lay Italian and English national programmes on the smartboard and a TV set Minimum Requirements e Satellite dish 1500mm e Decoder with 2 smart card slots 2 USBs e Digital recorder 500Gb with CD DVD recorder 2 USB e Smart TV LED 42 107 cm Panel resolution 1920x1080p Aspect ratio 16 9 Digital TV DVB C MPEG2 DVB C MPEG4 DVB T MPEG2 DVB T MPEG4 Video Playback NTSC PAL SECAM HDMI connections 3 Component in YPbPr 1 Scarts RGB CVBS 1 AV connections 1 USBs 2 Wireless LAN ready 1 2 3 24 Students Language Laboratory Equipment Equipment to be connected to the PC Lot 2 and other auxiliary equipment necessary to realise a modern language laboratory Minimum Requirements e _ Audio quality professional handset with unidirectional dynamic microphone 1 3 Qty SOFTWARE 1 3 1 1 Language Lab Management License Computer Assisted Language Laboratory CALL and Web Assisted Language Laboratories WALL applications for a class up to 24 students Minimum Requirements Basic Admin Software with Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 2 of 48 Quiz test module 5 audio video group managing from PAL DVD tapes files etc Up to 16 Audio group Pairing Management of all Classroom AAC File Manager Group Chat Control software for Internet Access of students Teach Protect CALL icon f
140. les of practical exercises e Explore the functioning of a single pulse converter direct polarization e Explore the functioning of a single pulse converter inverse polarization e Explore the functioning of a two pulse midpoint converter cathodes connected e Explore the functioning of a two pulse midpoint converter anodes connected e Explore the functioning of a three pulse midpoint converter cathodes connected e Explore the functioning of a three pulse midpoint converter anodes connected e Explore the functioning of a half controlled bridge e Explore the functioning of a fully controlled bridge e Explore the functioning of a three phase half controlled bridge e Explore the functioning of a three phase fully controlled bridge e Explore the functioning of a current limiting circuit for a 220V AC DC converter 7 2 4 AC AC inverters kit about 1 kW Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Explore the functioning of a PWM control card for a 380V AC AC inverter e Explore the functioning of a 380V AC AC inverter for power drive e Explore the functioning of a 380V AC AC inverter with active load e Explore the functioning of a 380V AC AC inverter with reactive load e Explore the functioning of a 380V AC AC inverter under over current conditions e Explore the functioning of a 380V AC AC inverter under short circuit conditions 7 2 5 AC DC converters with DC motor kit about 0 5 kW The
141. lica Le Guerre Puniche e la conquista dell Oriente La Repubblica romana dal Il al secolo a C La fine della Repubblica Dalla Repubblica all Impero l et di Augusto primi due secoli dell Impero Le antiche civilt del lontano Oriente India e Cina Il cristianesimo e le origini della Chiesa La crisi del III secolo d C Da Diocleziano alla fine dell Impero d Occidente regni romano barbarici e l Impero bizantino Longobardi e l ascesa del papato La civilt araba e l et dell oro dell Impero bizantino L impero carolingio Gli albori di un mondo nuovo La rinascita del Basso Medioevo Il papato e l Impero Il Trecento e le sue crisi Il Quattrocento Le grandi scoperte geografiche Il Cinquecento L et delle guerre di religione Il Seicento Il Settecento e l assolutismo Il Settecento e le rivoluzioni Il Risorgimento L imperialismo e la seconda rivoluzione industriale L inizio del XX secolo L et dei nazionalismi La Prima Guerra Mondiale L et dei totalitarisimi La Seconda Guerra Mondiale La Guerra fredda La decolonizzazione Dal mondo bipolare al mondo unipolare L Italia in Europa Il mondo contemporaneo 12 2 Qty ITALIAN PAPER LEARNING RESOURCES General Requirements e Learning resources used in Italian technical and vocational schools students age 15 18 12 2 1 20 ITALIAN LANGUAGE FOR FOREIGNERS COPIES Topics covered each Carry out not less than 50 of the followi
142. ll incur exclusion 3 6 To be eligible for the participation in this tender procedure Tenderers must provide satisfactory proof to the Contracting Authority of compliance with the necessary administrative technical and financial requirements and of their capability and adequacy of resources to carry out the contract effectively In this regard the Tenderers will supply the Contracting Authority with proper evidence of their eligibility according to the required administrative technical and financial qualifications and evidence of having the capacity and the means compulsory for a proper fulfilment of the Supply Contract Therefore all the tenders will contain the following attachments a Tenderer s submission form Annex VII including i Tenderer s identification Annex VII 1 Data of the Tenderer and a company presentation and its profile description maximum 5 pages No other promotional material should be included ii Contact person for this tender Annex VII 2 iii Economic and financial capacity Annex VII 3 Official reports concerning accounting and financial situation of the Tenderer i e official profit and loss balance sheet cash flow and auditors reports of the last 3 years issued according International Accounting Standards IAS The statement should attest the amount of the total sales turnover regarding the last 3 business years prior to the tender The average sales turnover of the Tenderer in the last 3
143. lot within the limit of twenty five per cent 25 of total items per lot with the same price and quality provided in Italian Egyptian Integrated Technical Education Cluster the tender 13 2 Contractors cannot refuse the above mentioned modifications and the Contracting Authority has the right to be such modifications executed at the same contractual conditions 13 3 Contractors shall execute any non substantial modification that the Contracting Authority may see fit provided that the nature of the activity is not fundamentally altered and no additional costs are imposed Article 14 Inspection and testing The Inspections and Monitoring activities will be carried out by the Contracting Authority as follows Quantity and quality inspections of the supply inspection of the palling and packing certifications concerning shipping at the Supplier s factory loading and discharging port For the above mentioned operations will be issued the following certificates by the Contracting Authority Certificate of Conformity at loading Certificate of Discharge Certificate of Conformity at final destination and of delivery Article 15 Payments procedures Payments shall be made by means of irrevocable confirmed Letters of Credit in currency EGP to be issued by an Egyptian Bank through the Agent Bank indicated by the Contractor within thirty 30 days from the receiving date of the Contract from the Contracting Authority accord
144. mercial datasheet for each component and material included in the box List of practical exercises title and description that can be carried out 0 Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit Si DAS Industrial PLC training kit General Requirements AS Interface power supply AS Interface I O connection unit 8 Input amp 8 Output AS Interface control unit STEP 7 training package or equivalent PLC Siemens Series S7 300 or equivalent Interactive Training Software Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Cabling the PLC system and components to realize a networking app with AS Interface e Connect communication cables between PC and PLC and between PLCs e Realize demo systems to simulate 4 industrial automation systems examples food production line water distillation stations marble and granite polishing machine packaging machine etc
145. n Annex IIl and may be provided in the form of a bank guarantee a banker s draft a certified cheque a bond provided by an insurance and or bonding company or an irrevocable letter of credit If the performance guarantee is to be provided in the form of a bank guarantee a banker s draft a certified cheque or a bond it shall be issued by a bank or insurance and or bonding company in accordance with the eligibility criteria applicable for the award of the contract 11 4 The performance guarantee shall be denominated in EGP No payments shall be made in favour of the Contractor prior to the provision of the guarantee The guarantee shall continue to remain valid until the contract has been fully and properly performed 11 5 During the performance of the contract if the natural or legal person providing the guarantee is not able to attend by his commitments the guarantee shall cease to be valid The Contracting Authority shall give formal notice to the Contractor to provide a new guarantee on the same terms as the previous one Should the Contractor fail to provide a new guarantee the Contracting Authority may terminate the contract Before so doing the Contracting Authority shall send a registered letter with acknowledgement of receipt which shall set a new deadline of no less than fifteen 15 days from the day of delivery of the letter 11 6 The Contracting Authority shall demand payment from the guarantee of all sums for which the guarantor
146. n Egypt or in Italy The Tenderers under their own responsibility shall declare for each lot the origin of the supply offered including a list of the items that will not have the origin declared All the items will be considered without a specified origin if the list is not submitted The awarded Tenderer should confirm the origin with a Certificate of Origin issued by a Chamber of Commerce 4 2 The supplies should comply with decision No 768 2008 EC CE marking directive The Tenderers under their own responsibility shall declare for each lot the compliance to the decision No 768 2008 EC including a list of the items that will not comply with such decision All the items will be considered not to be compliant with such decision if the list is not submitted The awarded Tenderer should confirm the compliance to decision No 768 2008 EC of the delivered items A 5 Contract characteristic 5 1 The Contract is a multiple lots supply contract Tenderers can submit their offers for one or more lots in the same tender Contract will be assigned lot by lot on the basis of the best technical and economical performance A 6 Currency 6 1 Tenders must be presented in EGP A 7 Period of validity 7 1 Tenderers shall be bound by their tenders for a period of 120 days from the deadline for the submission of tenders 7 2 In exceptional circumstances and prior to the expiry of the original tender validity period the Contracting Authority may ask Ten
147. n aSiuppo J 9 Education Development Fund Invitation to Participate in the International Open Tender 4 2013 The Education Development Fund EDF Cabinet of Ministers at 13 Haroun St Dokki Giza Egypt invites all Tenderers to submit their proposal for the supply installation of 12 lots of laboratory equipment services and digital learning resources for the Integrated Technical Education Cluster ITEC at Fayoum Tenderers must provide a tender guarantee per lot in Egyptian Pounds as per the following table Value of the tender guarantee EGP List of the lots for each Lot In Figures In Letters Lot 1 Language lab 10 000 Ten Thousands Lot 2 CAD CAE lab 5 000 Five Thousands Lot 3 Chemistry lab 25 000 Twenty Five Thousands Lot 4 Electrical residential installations 20 000 Twenty Thousands Lot 5 Electrical installation materials 25 000 Twenty Five Thousands Lot 6 Electrical equipment 10 000 Ten Thousands Lot 7 Electrical motor drivers 30 000 Thirty Thousands Lot 8 Electrical industrial installations 10 000 Ten Thousands Lot 9 Home building automation kit 20 000 Twenty Thousands Lot 10 Photovoltaic kit 5 000 Five Thousands Lot 11 Discrete electronic components 5 000 Five Thousands Lot 12 Learning resources 10 000 Ten Thousands Bidding documents are available from EDF s at the above address against the payment of EGP 2000 Only Two Thousand EGP as a pre requisite to
148. n discrete electronics Technical requirements Structure e tobe built in structural steel and welded sheet steel e the work plane made of strong chipboard covered with plastic laminate e should accommodate on the same side two students working at the same time ensuring comfortable and safe operations e with No 2 metal drawers key locked per position total 4 drawers per bench e the student workbench can be positioned against a wall Technical requirements support with electronic development module e Metallic Support for housing the experiment modules The modules can be fixed to the frame of the support by using a Plug in system The electronic development module should include on board e function generator pulse sine triangle square 0 1 to 100 khz in 6 steps a fine frequency control included e TTL generator TTL voltage generator output range 1 hz to 100 khz e logic inputs 8 lever switches and 2 pushbuttons e analog inputs 4 potentiometers with 3 available terminals terminals can be used in the breadboards e display 4 digit display e logic indicators 10 leds available to be connected ttl logical level e thumbwheel switches 4 decimal bcd switches e loudspeaker e breadboard 2000 total connection points Technical requirements Electrical e AC main line 3 x 230 or 3 x 400 V 16 A and 230 V single phase line 16 A with MCB RCB 30 mA sensitivity and 4 mm safety terminals This main line should include EPB
149. nder procedure 15 2 Any notifications of alteration or withdrawal shall be prepared and submitted in accordance with the Tender Instructions contained in this document The outer envelope must be marked other then with the other indications according to the provisions in Article 10 with the word Alteration or Withdrawal as appropriate 15 3 No tender may be withdrawn in the period between the deadline for submission of tenders referred to in Article 10 and the expiry of the tender validity period The withdrawal of a tender during this interval may result in forfeiture of the tender guarantee A 16 Costs for preparing tenders and ownership of tenders 16 1 No costs incurred by the Tenderer in preparing and submitting the tender shall be reimbursable All costs incurred by the Tenderer in preparing and submitting the tender shall be borne by the Tenderer Italian Egyptian Integrated Technical Education Cluster 16 2 The Contracting Authority retains ownership in all tenders received under this tender procedure Consequently Tenderers have no right to have their tenders returned to them A 17 Opening of the tenders 17 1 Tenders shall be opened at the Contracting Authority premises in a public session by the Tender Opening Committee according to the timing indicated in the timetable paragraph 2 of the Instructions to Tenderers local time of the Contracting Authority 17 2 Only the tenders which have been received within the f
150. nderer Annate Name Authorized signature Date Stamp of the tenderer the Tenderer should include here the list of the practical exercises indicated in the Technical Specifications Annex E the Tenderer should indicate for each practical exercise if he complies Yes or not No minimum 50 of the exercise per each kit the Tenderer should provide some key information in case of an alternative is proposed the Tenderer should indicate the annex where characteristics data and information of the exercises are described Italian Egyptian Integrated Technical Education Cluster XI 5 ANNEX DIGITAL LEARNING RESOURCES EVALUATION GRID Supply of electrical laborator Tender Contract PP 4 7 Tenderer s Lot No x equipment services and digital learning envelope i Title name and title resources for the ITEC in Fayoum number mu Language Notes Descriptions Features List of Digital resources requested Content Tenderer s Ref to Annex I E A of the tenderer Name Authorized signature Date Stamp of the tenderer the Tenderer should include here the list of items for digital learning resources indicated in the Technical Specifications Annex E the Tenderer should indicate for Italian E for English and A for Arabic the Tenderer should not fill this field the Tenderer should indicate the annex where digital l
151. ndicate the date of payment of the advance balance We note that you will release the guarantee and notify us of the fact at the latest within sixty days of provisional final acceptance of the goods within thirty days of receipt of the final statement Any dispute concerning this guarantee shall be governed by the Egyptian law and fall within the competence of the courts of Egypt Name aa ia Position Signature Date lt Date gt Italian Egyptian Integrated Technical Education Cluster V ANNEX TENDER BANK GUARANTEE FORMAT lt To be completed on letterhead paper of the financial institution gt For the attention of Education Development Fund 13 Haroun St Dokki Giza Egypt referred to below as the Contracting Authority lt Date gt Contract title Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program We the undersigned lt name and address of financial institution gt hereby irrevocably declare that we will guarantee as primary obligor and not merely as a surety on behalf of lt Tenderer s name and address gt the payment to the Contracting Authority of lt amount of the tender guarantee according the following table gt this amount representing the guarantee referred to in article 3 6 c of the Instructions to Tenderers
152. nex II to be provided according to the Technical Specifications detailed in Section E e Packing e Transport from ex work to port of embarking e Sea freight to the selected sea Port handling loading and unloading e The seller bears the costs and risks associated with the import clearance unloading and subsequent delivery beyond the place of final destination e All risk insurance policy for the 110 of the contract value e Warranty for 36 months e Assembling and training course in Egypt as listed by the Contractor into the Pro forma Invoice no dated with annexes all herewith enclosed and to be considered integral part of this contract and it will be Annex no X Italian Egyptian Integrated Technical Education Cluster 1 2 The Contractor hereby undertakes that the supply and the conditions of supply described into the Pro forma Invoice no dated and annexes are absolutely the same as specified into the technical offer no and financial offer no dated and indicated in the Letter of Award protocol no dated ARTICLE 2 PERFORMANCE GUARANTEE 2 1 The Supplier shall issue a Performance Guarantee as per Annex III in favour of the Purchaser according to the provisions of the Tender s documents delivered to the Person in Charge together with the Contract duly signed for acceptance not later than 20 days from the date of receipt of its date The Supplier commits himself to instruct the Bank to extend the validity of the gu
153. nex XI For all the tenders will be performed the following steps 1 The Offer s price for each lot for each qualified Tenderer will be recorded 2 The tenders will be also verified in order to find out any sort of mistake in calculations and additions The Tender Opening Committee will amend miscalculations as follows a If there is a difference between the amounts in figures and the ones in words the last ones will be considered valid b If there is a difference in the calculations the operation is calculated with the provided numbers and compared with the result provided in the tender the highest result is considered valid except if in the Committee s opinion there is an evident mistake in the number provided In this case the total amount shown will be considered valid and the Committee will amend the value 3 The Evaluation Committee will complete the scoring of the lots considering technical and financial evaluations and will announce the ranking of each lot 17 6 Any tender amount amended by the Tender Opening Committee according to Article 17 5 2 shall be considered binding for the Tenderer If the Tenderer does not accept the amended tender amount his tender will be rejected 17 7 After the opening of the tenders no information concerning examination specification evaluation and comparison of the tenders as well as no recommendation for the award of the Supply Contract will be provided to the Tenderers or to any o
154. nformation provided by the Tenderer and considering the balance between the learning resources provided e the content of the digital resources will be based assessing the examples provided by the tenderer 18 6 After the technical assessment and scoring the tenders will be admitted to the financial evaluation phase In the assessment and scoring the Evaluation Committee will take in consideration only the price offered by the Tenderer 18 7 The awarding criteria will be the price and other quality criteria as indicated in the following article 19 Scoring System The contract will be awarded to the best tender according to the assigned score 18 8 The Tenderer which deems himself damaged because of a mistake or any irregularity occurred during the evaluation procedure or the supply s award shall submit the claim directly to the Contracting Authority The Person in Charge at the Contracting Authority The Contracting Authority has thirty 30 working days to reply starting from the receiving date of the complaint After such time elapses without answer the claim shall be considered rejected A 19 Evaluation and Scoring Criteria Maximum Allocated Points per Criterion Scoring Criteria Criteria for evaluation Offer Score according to its degree of Compliance with set Criteria e Atleast 90 of the items are in compliance Up to 100 of maximum number of points allocated e Atleast 80 of the items are in compliance
155. ng examples of topics Libro di testo per la 1 classe della media inferiore Libro di testo per la 2 classe della media inferiore Libro di testo per la 3 classe della media inferiore Libro di testo per la 1 classe dell istituto professionale tecnico Libro di testo per la 2 classe dell istituto professionale tecnico Libro di testo per la 3 classe dell istituto professionale tecnico Libro di testo per la 4 classe dell istituto professionale tecnico Libro di testo per la 5 classe dell istituto professionale tecnico Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 42 of 48 Libro di lettura per la 1 classe della media inferiore Libro di lettura per la 2 classe della media inferiore Libro di lettura per la 3 classe della media inferiore Libro di lettura per la 1 classe dell istituto professionale tecnico Libro di lettura per la 2 classe dell istituto professionale tecnico Libro di lettura per la 3 classe dell istituto professionale tecnico Libro di lettura per la 4 classe dell istituto professionale tecnico Libro di lettura per la 5 classe dell istituto professionale tecnico 12 2 2 20 copies each ENGLISH LANGUAGE FOR FOREIGNERS Topics covered Carry out not less than 50 of the following examples of topics e Libro di testo per la 1 classe della media inferiore Libro di testo per la 2 classe della media inferiore Lib
156. ning and the after sales services of each lot offered Tenderer s offered DAP List of the lots price in EGP Lot 1 Language lab Lot 2 CAD CAE lab Lot 3 Chemistry lab Lot 4 Electrical residential installations Lot 5 Electrical installation materials Lot 6 Electrical equipment Lot 7 Electronic motor drivers Lot 8 Electrical industrial installations Lot 9 Home building automation kit Lot 10 Photovoltaic kit Lot 11 Discrete electronic components Lot 12 Learning resources insert the sentence not offered for the lots not offered by the tenderer Done at nannan i At by name On behalf of vasti tai tenderer s stamp Italian Egyptian Integrated Technical Education Cluster Il ANNEX DELIVERY SCHEDULE Contract title Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program Contract Authority Education Development Fund 13 Haroun St Dokki Giza Egypt To the Attention of Dr Mohammad Megahed Tenderer lt denomination name of the tenderer gt Maximum length of the delivery period in calendar days for each lot offered List of the lots Contracting Authority expected maximum delivery time Tenderer s offered delivery time Lot 1 Language lab 60 calendar days Lot
157. ns Networking Getting Connected Using The Web Communicating on the Net Multimedia and Entertainment on the Net Shopping and Business Online Glossary of surveying and building Stone Bricks and Mortar Concrete Steel and Reinforced Concrete Timber Ecological Materials Glass and Plastic Insulating Materials Paintings New Materials Foundations Walls Floors and Stairs Roofs The Piping System and Air Conditioning System The Electrical and Heating System The Hydraulic and Sewage System New Sources of Energy House design in the UK and in the USA House Construction Methods Bio architecture Restoration Town Planning Environmental Problems Green Cities Road Design and Construction Public Buildings History of Architecture 12 1 8 History Digital Learning Resources Topics covered Carry out not less than 50 of the following examples of topics Le origini dell umanita Le civilta della Mesopotamia Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 41 of 48 La civilta egizia Le civilta della Palestina antica Alle radici della civilta greca mondo delle poleis e le colonie Sparta e Atene in epoca arcaica Lo scontro fra la Grecia e la Persia Dall apogeo di Atene alla Guerra del Peloponneso Dalla crisi della polis al mondo di Alessandro Magno L Italia antica e le origini di Roma Roma dalla monarchia alla Repubb
158. nsiemi relazioni funzioni Calcolo letterale Esponenziali e logaritmi Equazioni Disequazioni Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 38 of 48 Sistemi lineari di equazioni e disequazioni Sistemi non lineari di equazioni e disequazioni Equazioni e disequazioni di 2 grado Piano cartesiano e rappresentazione grafica di funzioni La retta Le coniche Funzioni Limiti Derivate Integrali Concetti geometrici fondamentali Triangoli Quadrilateri Rette Circonferenza e cerchio Equivalenze Le grandezze e la loro misura Le trasformazioni del piano piani e rette nelle spazio poliedri prisma e piramide solidi di rotazione Distribuzioni di frequenza Indicatori di centralit e di dispersione Distribuzioni di probabilit Rappresentazioni grafiche 12 1 3 Physics Digital Learning Resources Topics covered Carry out not less than 50 of the following examples of topics e Misura ed errore di misura Vettori e scalari Forze e equilibrio Moto rettilineo uniforme Moto rettilineo uniformemente accelerato Moto circolare Moto armonico Forze e leggi di Newton Sistemi inerziali e non inerziali Il lavoro e l energia La quantit di moto Il momento di una forza La gravitazione universale i gas e la teoria cinetica i principi della termodinamica i moti ondulatori il suono la luce carica e campo elettrico
159. nstall plugs and sockets protected against accidental contacts Select and install plugs and sockets protected against ingress of water Install 220 200 110 socket with isolating transformer Technical Requirements experimental panel painted steel experimental panel with hinges to be installed vertically in the students workbench equipped with 10 or more rectangular holes for electrical embedded boxes derivations boxes required for the practical exercises rear part of the panel components connected with plastic tubes support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panel 1 socket 3 phases ground 16 A CEE 3P T 16A 400Va c 1 socket 10 A 16 A Schuko single phase ground 2P T 2 sockets 10 A single phases ground Schuko 1 sockets 10 A single phases ground with child security 1 sockets 10 A single phases ground with minimum protection IP54 1 socket 220 200 110 with isolating transformer 4 2 3 12 Lighting installation kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises Connect a lamp controlled by a switch Connect two lamps controlled by a changeover switch Connect a lamp controlled from two points Connect a group of lamps controlled from two points 1 socket
160. nts e 20 m length 5 1 13 6 Set of MCBs modular circuit breakers To assemble panels and enclosures General Requirements Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 18 of 48 e Thermal magnetic circuit breakers e In 63A e CEI EN 60898 Minimum Requirements q ty polarity Icu kA Earth leakage 20 1P 6 no 10 1P N 6 yes 10 2P 6 yes 5 1P N 10 no 5 2P 10 no 5 1 14 Set of MCCBs moulded case circuit breakers Thermal magnetic To assemble panels and enclosures General Requirements e Thermal magnetic circuit breakers e In 63A e CEI EN 60898 Minimum Requirements q ty polarity Icu kA In A 10 1P 36 100 3 4P 36 160 5 1 15 Set of MCCBs moulded case circuit breakers Thermal magnetic To assemble panels and enclosures Minimum Requirements q ty polarity Icu kA In A 6 4P 36 125 4 4P 70 400 2 4P 100 1600 5 1 16 Set of MCCBs moulded case circuit breakers Electronic Breakers To assemble cabinets Minimum Requirements q ty polarity Icu kA In A 5 4P 100 1200 5 1 17 Set of ACBs air case circuit breakers To assemble cabinets Minimum Requirements q ty polarity Icu kA In A 2 4P 100 2500 5 1 18 Electrical panels up to 250A Minimum Requirements e Electrical switchboard multi board with 2 or more DIN rail lines for MCBs and MCCB up to 250A e Ele
161. o conduct the evaluation process as follows 1 Open the Envelope A Administrative Compliance verify the presence and validity of the required documents see Annex XI 1 and assess the compliance to the requirements using the Administrative Compliance grid included in the Annexes to the evaluation report In case of any missing data notify the tenderer to complete the missing documents within seven 7 calendar days starting from the date of the notification 2 Verify the references provided by the Tenderer 3 Open the envelopes inside the Envelope B Technical Offer verify the presence and validity of the required documents see Annex XI 2 and for each lot assess Italian Egyptian Integrated Technical Education Cluster the compliance to the requirements using the Technical Compliance grid and the Evaluation grids included in the Annexes to the evaluation report Reject the tenders that do not comply with these requirements and store them in a safe location 4 Inform through the Contracting Authority in written form all Tenderers satisfying the Technical Compliance about the public opening date of the envelopes containing the Financial Offer 17 5 During the opening of the Financial offers the Tender Opening Committee after assessing the envelopes are in conformity to the above Article 10 will proceed to the opening of the Envelope C reading the Tenderers name and drawing up the tender opening report see An
162. ocured under the variation 22 2 The Contracting Authority shall have the power to order any variation to any part of the supplies necessary for the proper completion and or functioning of the supplies Such variations may include additions omissions substitutions changes in quality quantity form character kind as well as drawings designs or specifications where the supplies are to be specifically manufactured for the Contracting Authority method of shipment or packing place of delivery and in the specified sequence method or timing of execution of the supplies No order for a variation may result in the invalidation of the contract but the financial effect of any such variation shall be valued in accordance with Article 22 6 22 3 No variation shall be made except by administrative order subject to the following provisions a if for whatever reason the Contracting Authority believes it necessary to give an order orally he shall confirm the order by an administrative order as soon as possible b if the Contractor confirms in writing an oral order given for the purpose of Article 22 3 a and the confirmation is not contradicted in writing forthwith by the Contracting Authority an administrative order shall be deemed to have been issued for the variation c an administrative order for a variation shall not be required when increasing or decreasing the quantity of any work because the estimates in the bill of quantities or bud
163. ods and draw up an inventory of the supplied materials which have not been used Besides it is drawn up a list of the amounts the Contractor shall pay to the Contracting Authority b The Contracting Authority may buy at market price materials and items supplied or ordered by the Contractor and still to be paid by the Contracting Authority himself at the conditions deemed advisable by the Contracting Authority Italian Egyptian Integrated Technical Education Cluster 35 7 The Contracting Authority is not obliged to effect other payments in favour of the Contractor until goods have been entirely delivered The Contracting Authority is neither obliged to effect other payments in favour of the Contractor before the Contractor reimburses to the Contracting Authority the eventual additional expenses due to the supplies execution or else the Contracting Authority shall settle the outstanding to the Contractor before the Supply Contract cancellation 35 8 In case the Contracting Authority cancels the Supply Contract because of the Contractor s default the Contractor shall reimburse him for the suffered damages to a maximum amount fixed in the Supply Contract If no maximum amount has been fixed the Contracting Authority will receive only the share of the Supply Contract s price corresponding to the amount of that part of the goods that because of the Contractor s default do not comply with their intended use 35 9 Where the Supply Contract
164. of 1 teacher and 24 students Minimum Requirements Carry out not less than 50 of the following subjects e Display on time base data acquired via sensors and data loggers e Produce plots and charts in real time with data acquired via sensors and data loggers e Produce historical charts with data acquired via sensors and data loggers e Produce charts correlating different data acquired via sensors and data loggers Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 8 of 48 ITEM Qty 4 DESCRIPTION AND REQUIREMENTS Lot 4 ELECTRICAL RESIDENTIAL INSTALLATIONS e Dimensions of the Electrical Domestic Installation Workshop are about 12m w x 11 5m I layout can be requested to the contracting authority e Computer for the teacher and intelligent board will be provided by the Contracting Authority see Annex A General Requirements e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Electrical Domestic Installation Workshop e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment 4 1 Qty Student vertical w
165. of at least 90 days after delivery e Certificate of full receipt of the above mentioned sum signed by the Supplier e Pro forma invoice in 5 five copies A payment equal to 65 of the contract value which including the above mentioned advance payment covering up to 90 of the contract value will be recognised against the following documents e Certificate of full receipt of the above mentioned sum signed by the Contractor e All risk insurance Policy Certificate for the agreed Incoterm Clause according to what requested and indicated in the Special Conditions e Commercial Invoice in five 5 copies issued by the Supplier e Packing list in five 5 copies e Certificate of Origin issued by the local Chamber of Commerce certifying the origin of the commodities e Supplier declaration of liability stating the origin of the commodities e 2 3 of Bill of Lading issued to the order and blank endorsed clean on board Freight Prepaid The residual value equal to 10 of the total amount of the supply contract shall be paid upon presentation of the Certificate of Final Testing of the supply issued and signed by the Contracting Authority after the expiring of the Warranty Period Alternatively the residual value equal to 10 of the total amount of the supply may be paid to the Supplier after 45 days from the date of the Certificate of Conformity at final destination and of delivery issued by the Technical Committee and a
166. om the Contracting Authority 23 3 If the Successful Tenderer fails to provide the Performance Guarantee the contract signed and the updated delivery schedule within 30 calendar days following the notification of the provisional award or if the successful Tenderer is found to have provided false information the award will be considered null and void In such a case the Contracting Authority may award the tender to another Tenderer or cancel the tender procedure In such event without prejudice to the Contracting Authority s right to seize the guarantee claim compensation or pursue any other remedy in respect of such failure the successful Tenderer will have no claim whatsoever on the Contracting Authority 23 4 Within 60 calendar days but not before 30 calendar days from the final award notification the Contracting Authority and the successful Tenderer shall sign and date the Contract 23 5 In case the supply contract is not signed in Egypt within 30 days from receipt of the performance guarantee and two copies of the contract already signed by the Tenderer the Contracting Authority shall sign and date the contract and return the second original to the Tenderer On signing the contract the successful Tenderer will become the Contractor and the contract will enter into force 23 6 The Performance Guarantee referred to in the General Conditions is set at 5 of the price of the contract inclusive of the Tender Guarantee and must be p
167. omponents and tools should comply with EC directives and should have the EC European mark 6 1 Qty Electrical equipment 6 1 1 3 Set of Transformers Minimum Requirements Metallic trolley heavy duty to store and carry the set of transformers transformer single phase 220 50 VAC 50 VA galvanic separation transformer single phase 220 50 VAC 300 VA galvanic separation transformer single phase 220 50 VAC 1000 VA galvanic separation transformer three phases 500 380 220 500 VA galvanic separation transformer three phases 500 380 220 5000 VA galvanic separation Set of induction motors 3000 turn min Minimum Requirements e Metallic trolley heavy duty to store and carry the set of induction motors e AC motor single phase 300 VA e AC motor three phase 1000 VA with star delta connections e _AC motor three phases 3000 VA with star delta connections Set of electronic drivers inverters for induction motors 100 3000 turn min Minimum Requirements e 220 VAC electronic speed torque controlled driver single phase 300 VA e _ 380 VAC electronic speed torque controlled driver three phase 1000 VA Set of electronic flux and torque control drive for induction motor Minimum Requirements e 220 VAC electronic speed torque controlled driver single phase 300 VA e 380 VAC electronic speed torque controlled driver three phase 1000 VA A62 E Technical SpecificationsEDF Fayoum ITEC Internationa
168. on Install an anti theft circuit for three zones protection Install an anti theft circuit for four zones protection Technical Requirements experimental panel PANEL The size should be fully compatible with the vertical working positions of the a m unit Equipped with sockets for components of the antitheft system rear part of the panel components connected with plastic tubes with holes in correspondence of components to be installed support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements programmable anti theft electronic control board up to 4 programmable protection zones one 24h alarm circuit on board programming keyboard 0 to 20 min programmable alarm time 5 A contacts relay protection fuses outputs for powering detectors charging external batteries and controlling self powered sirens signalling LEDs Supplied with the due resistors balancing the 24h circuit and the alarm lines Power supply 230 Vac 50 60 Hz Battery and charger 12 Vdc 2 Ah Technical Requirements sensors to be installed on the panels 1 IR microwave 75 degrees horizontal coverage over 12 m range 10 GHz 10 mW NC contact for 24h line Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 12 of 48 1 IR passive senso
169. onal Tender 4 2013 Page 5 of 48 ITEM Qty 3 DESCRIPTION AND REQUIREMENTS Lot 3 CHEMISTRY LAB e Dimensions of the Physics and Chemistry Lab are about 14 5m w x 13 5m I and two preparatory rooms of 7 0m w x 6 5m I layout can be requested to the contracting authority e Computer for the teacher and intelligent board will be provided by the Contracting Authority see Annex A General Requirements e The items of this lot should be delivered installed connect to required utilities water sewage electricity gas and functionally operational in the Chemistry Laboratory e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 4 hours demo to teachers demonstrating most of the functionalities of the equipment 3 1 Qty FURNITURES for CHEMISTRY LABORATORY 3 1 1 6 Special desk for chemistry experiments The student desk should accommodate four students working at the same time ensuring comfortable and safe activities Minimum Requirements e Dimension of about 250Wx100Lx90H cm Underneath storage space with lockable sliding doors Heavy duty and of strong and secure construction Very rigid structure in metal tubular profile Top made of highly compressed multi layer fine chipboard and resistant to scratches and to chemicals Integrated cup sink stainless steel c
170. onents necessary to the proper power supply of the circuits are included in the panel front face made of insulating material and provides the support of the devices necessary to carry out the experiment programs includes real and operative electrical devices with their international symbol labeled in the panel Technical Requirements components Grounding simulation 1 set 0 3 Q 10 1 set 20 20 Q 2000 2 k Q 2 ground user simulators 50 KQ 15 kO 5 KQ 1 5 KQ 500 Q Isolating transformer 3 ph 230 400 V 230 400 V 1500 VA RCBs 1 2 poles 1 A C curve AC class 1 2 poles 1 A C curve A class Switching devices 1 switching device 4 x 2A C curve 1 switching device with 4 poles E L C B 25 A 0 3 A A class selectivity S Thermal device 1 4 x 6 A C curve with break coil for low voltage and emergency mechanical push button Power cable supplied complete with socket and plug Safety jumpers and cables 4 mm qty required for the perfect development of all the exercises Power supply 3 x 400 V N PE 50 60 Hz Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 15 of 48 4 3 Qty DIGITAL LEARNING RESOURCE Digital resources for Electrical Lab in technical and professional schools students age 15 18 General Requirements e Operating according a 2 0 educational scheme that includes presentation using inter
171. or development SWAP program Contracting Authority Education Development Fund 13 Haroun St Dokki Giza Egypt Place of destination Demo Technical Secondary School Fayoum Egypt Table of content Article 1 Deimos asian 2 Article 2 Law and language of the Supply Contract 3 Article 3 Order of precedence of contract documents 3 Article 4 GGMmMInNicaloist crcale 3 Alice ASI 3 Article 6 Subcontracting riali 4 Article 7 Supply Of COCUIMONNS crc icetscceccccierescetieretenctesenctdseruiaceionestidareeianstenertedeeneanien 4 Article 8 Assistance with local regulations 4 Article 9 General Obligations lalla 5 Article TO Olin 5 Article 11 Performance Qualafiebsiacn ilaele D Article 12 MPU CNA Eee ghee eg aes ere tee se ee T 6 Article 13 Performance programme i 7 Article 14 Contractor s drawings eter eee teeenneeeeeeeeeeetenncaeeeeeeeeetteea 7 Article 15 Sufficiency of tender prices 8 Article 16 Tax and customs arrangements 9 Article 17 Patents and IGGNeSSs llle rata 9 Article 18 Commencementorder ii 9 Article 19 Period of execution of taskS i 9 Italian Egyptian Integrated Technical Education Cluster Article 20 Extension of period Of execution i 9 Article 21 Delays in execution ii sn chlvessedeceeevvabinestebeteee 10 Article 2
172. or is an alliance of two or more persons as per the provisions of article 3 4 of Instructions to Tenderers all these persons shall be jointly and severally bound to fulfil the terms of the contract according to the law of the State of the Contracting Authority They shall also designate on request of the Contracting Authority one of them to act as leader with the authority to bind the alliance The parts of the alliance shall not be altered without prior written consent of the Contracting Authority Article 10 Origin 10 1 The supplies should preferably be manufactured in Egypt or in Italy The origin should be the one declared in the Contractor s Tender and annexes Article 11 Performance guarantee 11 1 The Contractor shall provide within thirty 30 days of receipt of the notification of the award of contract the Contracting Authority with a guarantee for the full and proper performance of the contract The amount of the guarantee shall be specified in the Special Conditions It shall not exceed the provisions of article 23 6 of the Instructions to Tenderers including any amounts stipulated in addenda to the contract Italian Egyptian Integrated Technical Education Cluster 11 2 The performance guarantee shall be held against payment to the Contracting Authority for any loss resulting from the Contractor s failure to perform his contractual obligations fully and properly 11 3 The performance guarantee shall be in the format given i
173. or the request of support 1 3 2 Arabic as a foreign language Student license for learning Arabic language as a foreign language Minimum Requirements e Extensive tutorial in English and Italian e Programme covering levels from A1 to C1 of CEFR e Programme adopting Content and language integrated learning CLIL on electrical and mechanical subjects are preferred 1 3 3 English as a foreign language Student license for learning Arabic language as a foreign language Minimum Requirements e Extensive tutorials in Arabic and Italian e Programme covering levels from A1 to C1 of CEFR e Programme adopting Content and language integrated learning CLIL on electrical and mechanical subjects are preferred 1 3 4 Italian as a foreign language Student license for Learning Italian language as a foreign language Minimum Requirements e Extensive tutorial in Arabic and English e Programme covering levels from A1 to C1 of CEFR e Programme adopting Content and language integrated learning CLIL on electrical and mechanical subjects are preferred Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 3 of 48 ITEM Qty 2 DESCRIPTION AND REQUIREMENTS Lot 2 2 CAD CAE LAB e Dimensions of the CAD CAE Laboratory are about 11m w x 5 25m I layout can be requested to the contracting authority e Computers fo
174. orkbench 4 1 1 42 Student vertical workbench The unit should be the support the infrastructure to develop a set of practical exercises referred to the following subjects e practical exercises for assembly wiring and testing of protection electrical installations e Practical exercises for assembly wiring and testing electrical domestic installations practical exercises for assembly wiring and testing of lighting electrical installations e practical exercises for wiring and testing of anti theft electrical should include the related electronics devices installations e practical exercises for wiring and testing of video intercom and basics on telephony electrical installations e practical exercises for wiring and testing of fire gas smokes fighting electrical installations Technical requirements Structure e to be built in structural steel and welded sheet steel e the work plane will be made of strong chipboard covered with plastic laminate e the upright frame will support vertical interchangeable panels e should accommodate on the same side two students working at the same time ensuring comfortable and safe operations with No 2 metal drawers key locked per position total 4 drawers per bench e the student workbench can be positioned against a wall Technical requirements Electrical e 1 AC main line 3 x 230 or 3 x 400 V 16 A and 230 V single phase line 16 A with MCB RCB 30 mA sensitivity and 4 mm sa
175. pecial Conditions may specify that the Contractor must provide any or all of the following materials notifications and documents pertaining to spare parts manufactured or distributed by the Contractor a such spare parts as the Contracting Authority may choose to purchase from the Contractor it being understood that this choice shall not release the Contractor from any warranty obligations under the contract b in the event of termination of production of the spare parts advance notification to the Contracting Authority to allow it to procure the parts required and following such termination provision at no cost to the Contracting Authority of the blueprints drawings and specifications of the spare parts if and when requested Article 33 Final acceptance 33 1 Upon expiry of the warranty period or where there is more than one period upon expiry of the latest period and when all defects or damage have been repaired the Contracting Authority shall issue the Contractor a final acceptance certificate stating the date on which the Contractor completed his obligations under the contract with the Contracting Authority s satisfaction The final acceptance certificate shall be issued by the Contracting Authority no later than ninety 90 days from the expiry of the warranty Italian Egyptian Integrated Technical Education Cluster period or as soon as any repairs ordered under Article 31 have been completed to the satisfaction of the Contra
176. ply Contract within thirty 80 working days from the awarding date 22 2 The Contracting Authority will not sign the Supply Contract until the Performance Guarantee has been provided by the Contractor 22 3 In case of withdrawal of the Contractor the Contracting Authority can exercise its rights on the Tender Guarantee Moreover the Contracting Authority can assign the Tender to other Tenderers according to the position of their offers in the classification or a new Tender procedure can be started 22 4 The Supply Contract can be signed by all the signatories in Egypt on the same date at the Contracting Authority premises or it can be signed in different locations by the different signatories In this last case the order for signing the contract by the signatories is the following a The Contractor b The Contracting Authority Italian Egyptian Integrated Technical Education Cluster A 23 Signature of the supply contract and Performance Guarantee 23 1 The Contracting Authority will communicate in written form the provisional award notification to the successful Tenderer and will provide the draft of the contract 23 2 Unless otherwise provided in the tender dossier the successful Tenderer will provide the Performance Guarantee and the documentary proof to show that it does not fall into the non eligible categories listed in this Tender dossier within 20 days starting from the day after the date of receiving of the award notice fr
177. provided in the contract The Contractor shall further warrant that all supplies shall have no defect arising from design materials or workmanship except insofar as the design or materials are required by the specifications or from any act or omission that may develop under use of the supplies in the conditions obtaining in the country of the Contracting Authority This warranty shall remain valid as specified in the Special Conditions 31 2 The Contractor shall be responsible for repair any defect or damage to any part of the supplies which may appear or occur during the warranty period and which a results from the use of defective materials faulty workmanship or design of the Contractor or b results from any act or omission of the Contractor during the warranty period or c appears in the course of an inspection made by or on behalf of the Contracting Authority 31 3 The Contractor shall at his own cost make good the defect or damage as soon as practicable The warranty period for all items replaced or repaired shall recommence from the date on which the replacement or repair was made to the satisfaction of the Italian Egyptian Integrated Technical Education Cluster Contracting Authority If the contract provides for partial acceptance the warranty period shall be extended only for the part of the supplies affected by the replacement or repair 31 4 If any such defect appears or such damage occurs during the warranty period
178. pute settlement procedure all disputes shall be finally settled in accordance to Article 40 of the General Conditions Italian Egyptian Integrated Technical Education Cluster Article 23 Dispute settlement by legal action If no settlement is reached within 120 days from the moment the amicable dispute settlement procedure has started each Party may seek a ruling from the Egyptian court in accordance with the Egyptian Legislation After signing the Contract the international law may be applicable during the shipment Arbitration ruling is excluded Italian Egyptian Integrated Technical Education Cluster a aali 5ga eaill a GB gaina Education Development Fund al nasviluppo A Gude Auld D SUPPLY CONTRACT MODEL aay gil sic giga Reference Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program SUPPLY CONTRACT NO BETWEEN THE CONTRACTING AUTHORITY The Education Development Fund 13 Haroun St Dokki Giza Egypt Represented by the Secretary General hereinafter referred to as EDF AND THE CONTRACTOR SEE hereinafter referred to as the Contractor have agreed as follows Article 1 PURPOSE OF THE CONTRACT 1 1 The supply DDP as per Incoterms 2010 Annex IX Destination Demo Technical Institute Fayoum Governorate Egypt e List of Commodities as per An
179. qual to 10 of the Contract value and to pay you upon your first written demand through Bank channels declaring the Supplier to be in default under the Contract and without cavil or argument any sum or sums within the limits of EGP _ as aforesaid without your need to prove or show grounds or reasons for your demand of the sum specified therein This letter of guarantee will become effective automatically on the date of transferring the sum of EGP to the Suppliers bank account and shall expire upon the date of the Certificate of Final Testing issued and signed by the Purchaser and in any case on N B Not later than the date calculated as follows date of Certificate of conformity at final destination and of delivery 730 warranty days 90 days for the issuing of Certificate of Final Testing 90 days bank s mailing time Should we receive no claim from you by the expiry date of this guarantee our liability will become automatically null and void This undertaking is governed by Egyptian law place of jurisdiction is the courts of Egypt SIGNATURE AND SEAL OF THE GUARANTOR Italian Egyptian Integrated Technical Education Cluster Italian Egyptian Integrated Technical Education Cluster A62 F Annexes EDF 130222 NHA62 F Annexes EDF 130222 NH Fayoum ITEC International Tender 4 2013 Page 9 of 35 Vil ANNEX TENDER SUBMISSION FORM One signed form shall be supplied for each lot if the tender procedure is divided
180. quest the Tenderers for additional information concerning their offers including splitting the prices per unit The requests and the answers will be in written form and may take place by any means as described in the Article 13 The alteration of the tender price technical details of the offer or the content of other information provided will not be allowed with the only exception of alterations needed to confirm an amendment coming from a miscalculation found out by the Committee during the evaluation of the tenders in compliance with Article 17 5 2 18 4 According to the present article a suitable tender means an offer that complies with all the terms conditions and instructions provided by the tender dossier without any considerable deviation or reserve A considerable deviation or reserve means any discrepancy alternative condition or variable able to affect the significance the quality or the execution of the Supply Contract in a substantial way and which does not comply with the tender dossier Or on equal event which limits the Purchaser s rights or the Tenderer s obligations according to the Supply Contract or causes unfair prejudice to the position in the competition of the Tenderers who have submitted suitable tenders In particular e the tenders that comply with all administrative requirements as stated in the previous article 3 6 of these Instructions for tenderers are considered suitable by the Contracting Authority an
181. r 90 degrees horizontal coverage over 12 m range NC contact for 24h line 1 vibration level adjustable detector with NC contact 1 magnetic detector Technical Requirements actuators to be installed on the panels 1 self powered outdoor electronic siren supplied with battery over 100 dB acoustic power 1 two tone indoor siren 80 100 dB with modulated frequency 2 3 Hz 1 remote electronic key 3 state LEDs key reader supplied 1 remote keyboard for controlling and programming the control unit LCD 7 LEDs for signaling and programming 4 2 5 Ringer kit Bell system Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises install set up and detect faults of rings and buzzers with control from 1 point install set up and detect faults of rings and buzzers with control from different points install set up and detect faults of rings buzzers from an apartments and outdoor points install set up and detect faults of apartments signaling and electrical key lock install set up and detect faults of optical acoustical signaling for hotels schools large offices install set up and detect faults of optical acoustical signaling for hospital Technical Requirements experimental panel painted steel experimental panel with hinges to be installed in the STUDENT VERTICAL PANEL The size should be fully compatible with the vertical working po
182. r teacher see Annex A and students see Annex B and intelligent board will be provided by the Contracting Authority General Requirements e The items of this lot should be delivered installed connect in a network and functionally operational in the CAD CAE Laboratory e Manuals guidelines technical documentation demos and tutorials o in digital format CD or DVD o SO OSX and or Linux and or Windows o in English and or Italian and or Arabic o in three copies e 8 hours demo to teachers demonstrating most of the functionalities of the equipment 2 1 Qty HARDWARE 21 1 1 Network Colour Laser Printer A3 Minimum Requirements Loading tray for A4 amp A3 Print speed black 16ppm A4 Print speed colour 16ppm A4 Print quality black and colour 600x600dpi Monthly page volume 4000 pages Duty cycle monthly A4 50000 pages Printer languages PCL PostScript e OS Microsoft Windows and Mac OS X 2 1 2 1 Consumables for 2 years For the network colour laser printer 2 1 1 Minimum Requirements e Black cartridges and drum for printing 10 000 pages in normal quality e Colour cartridges and drum for printing 10 000 pages in normal quality 2 1 3 1 Network Colour Plotter AO Plotter with paper cutter included Minimum Requirements Print resolution black 1200x1200dpi Print resolution colour 1200x1200dpi Ink cartridge 4 Printer languages HP GL HP PCL e OS Microsoft Windows and Mac OS X
183. ract by the Contractor his subcontractors and their employees Article 13 Performance programme 13 1 If the Special Conditions so require the Contractor shall submit a programme of performance of the contract for the approval of the Contracting Authority The programme shall contain at least the following a the order in which the Contractor proposes to perform the contract including design manufacture delivery to place of receipt installation testing and commissioning b the deadlines for submission and approval of the drawings c a general description of the methods which the Contractor proposes to adopt for executing the contract and d such further details and information as the Contracting Authority may reasonably require 13 2 The Special Conditions shall specify the time limit within which the programme of performance must be submitted to the Contracting Authority for approval They may set time limits within which the Contractor must submit all or part of the detailed drawings documents and items They shall also state the deadline for the Contracting Authority s approval or acceptance of the programme of performance detailed drawings documents and items The approval of the programme by the Contracting Authority shall not relieve the Contractor of any of his obligations under the contract 13 3 No material alteration to the programme shall be made without the approval of the Contracting Authority If however the pro
184. refully examine and comply with all instructions forms contract provisions and specifications contained in this tender dossier Failure to submit a tender containing all the required information and documentation within the deadline specified will lead to the rejection of the tender No account can be taken of any reservation in the tender regarding the tender dossier any reservation will result in the immediate rejection of the tender without further evaluation For the purpose of this Tender the Contracting Authority will ensure that the procurement procedure is concluded in a transparent manner based on objective criteria and disregarding any possible external influence A glossary of the terms used here is provided in Annex VIII of this tender dossier Table of content A 1 Supplies to be provided arie 2 Pec Kcal 3 Ad PARVATI cc oe og assiale alare 3 A 4 Origin of the supplies to be provided iii 6 A5 ContracteharacteriStiC upon lele aa 6 RG CU 6 AP Pen dof VID flag 6 Italian Egyptian Integrated Technical Education Cluster AS Language of otfefs rurelaal eee ica 6 A 9 Information Clarification meeting site ViS t i 7 A10 Submission oftenders is rale ie he peed 7 AI Contento tenders nenna a a e a a a ala 9 PAZ Prien aride ale 10 FAS Additional informatio Misiin aiani a aa aa ir iaia 10 A 14 Correspondence with the Contracting Authority ii 11 A 15 Alteration or wi
185. rer name gt appeared to have an abnormally low price in relation to the market for the supplies in question Consequently the Chairperson of the Evaluation Committee wrote to lt Tenderer name gt to obtain a detailed explanation for the low price proposed On the basis of the response of the Tenderer the Evaluation Committee decided to e EITHER accept the tender because the Tenderer used an economic production method the nature of the technical solution used the financial offer reflected exceptionally favourable conditions available to the Tenderer e OR reject the tender as the abnormally low price could not be justified on objective grounds The final score EGP points of the tenders which were not excluded during the evaluation was as follows Lot No and title Tender Stated or Arithmeticall se N y Technical Final envelope Tenderer s name corrected financial offer points Score No EGP X 3 6 Ranking The Evaluation Committee on the base of the technical and financial evaluation ranked the tenders that are compliance administratively and technically being the first with the lowest score Lot No and title Rank Tender envelope No Tenderer s name Final Score 3 keep the paragraph if a tender appears to have an abnormally low price in relation to the market for the supplies in question otherwise delete the entire paragraph included the table Italian Egyptian
186. resented in the form specified in the Annex III to the tender dossier The Contracting Authority will release the Performance Guarantee or what remains of it within seven 7 days of the date of the final acceptance A 24 Contract modification 24 1 The contract may only be modified in the following cases a modifications of applicable laws and regulations b unforeseen and unforeseeable circumstances including the implementation of new materials components or technology not existing when the award procedure was commenced provided that the modifications may only ameliorate the quality of the performance without increasing the contract total amount and without affecting the quality of other goods inside the Supply c events related to the nature or the quality of the goods or places where the contract activities take place which occur during the contract execution and were unforeseeable when the contract was made d when the need arises the Contracting Authority has the right to increase or Italian Egyptian Integrated Technical Education Cluster decrease the quantity of the requested items per lot within the limit of twenty five per cent 25 of total items per lot with the same price and quality provided in the tender 24 2 Contractors cannot refuse the above mentioned modifications and the Contracting Authority has the right to have such modifications executed at the same contractual conditions 24 3 Contractors shall execut
187. rification will be published on the Contracting Authority web site at the latest 5 calendar days before the deadline for submission of tenders The requests shall be submitted by post to the following address Education Development Fund 13 Haroun St Dokki Giza Egypt To the Attention of Dr Mohammad Megahed Fayoum ITEC Project Director 13 4 The requests arrived in a different form with respect to the above mentioned one or if they arrive after the submission deadline will not be considered 13 5 Any prospective Tenderer seeking to arrange individual meetings with the representative of the Contracting Authority during the tender period may incur in exclusion from the tender procedure A 14 Correspondence with the Contracting Authority 14 1 After submitting the tenders to the Contracting Authority any sort of correspondence between the Tenderers and the Contracting Authority shall take place by contacting directly the Contracting Authority at the following address Education Development Fund 13 Haroun St Dokki Giza Egypt to the Attention of Dr Mohammad Megahed Fayoum ITEC Project Director A 15 Alteration or withdrawal of tenders 15 1 Tenderers may alter or withdraw their tenders by written notification prior to the deadline for submission of tenders referred to in Article 10 No tender may be altered after this deadline Withdrawals shall be unconditional and shall end all participation in the te
188. rimental panel with hinges to be installed vertically in the students workbench equipped with rectangular holes for electrical embedded boxes hole for the main box of a house modular units hole for 8 modular units derivations boxes required for the practical exercises rear part of the panel components connected with plastic tubes support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panel Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 10 of 48 2 bipolar RCB Idn 30 mA A and AC types 1 bipolar RCB 25A 0 3 A AC class 3 bipolar thermomagnetic switches curve C 6 10 and 16 A 1 complete fuse holder fuses 10 A 1 single ph energy counter 40 A able to visualize active reactive energies Power Factor voltage current service hours and active power 4 2 2 12 Electrical installation kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises Select cables for residential installations Connect a flexible cable to fixed point Connect two flexible cables Select and install sockets for electrical appliances Install sockets with protection mechanism Install security socket and plug Select and i
189. ring the procedure The Contracting Authority has no obligation to provide clarifications or additional information and its silence does not represent a positive or negative answer nor an answer of any sort Not under any circumstances the silence of the Contracting Authority regarding a request of clarification may represent a rightful element on which basis the Tenderers can claim any sort of prejudice if such clarification has not been made available for anybody However the Contracting Authority in order to facilitate the tendering of the supplies undertakes the duty of receiving and analysing requests for clarification from the Tenderers 13 2 If the Contracting Authority either on its own initiative or in response to a request from a prospective Tenderer provides additional information on the tender dossier it shall make available such information to all the other prospective Tenderers at the same time by using adequate ways of communication such as the Contracting Authority Web site 13 3 Tenderers may submit request for clarification in written form before the Clarification session as indicated in Article 2 of these instructions to tenderers specifying the publication reference and the contract title The requests shall arrive to the Contracting Authority no later than the date stipulated in Article 2 of these Instructions to Italian Egyptian Integrated Technical Education Cluster tenderers The replies to the requests of cla
190. ring the tender dossier and summarised the essential features of the tender procedure to date including the evaluation grid published as part of the tender dossier X 3 2 Tender opening session The Tender opening report is attached to this report The Evaluation Committee only considered those tenders which were found to be suitable for further evaluation following Italian Egyptian Integrated Technical Education Cluster the tender opening session X 3 3 Administrative compliance The Evaluation Committee used the administrative compliance grid included in the tender dossier to assess the compliance of each of the tenders with the administrative requirements of the tender dossier With the agreement of the other Evaluation Committee members the Chairperson wrote to the following Tenderers whose tenders required clarification offering them the possibility to respond by lt within a reasonable time limit fixed by the evaluation committee gt all correspondence is attached in the Annex indicated Tender envelope Tenderer s name Summary of exchange of correspondence No The completed Administrative compliance grid is attached On the basis of this the Evaluation Committee decided that the following tenders were administratively non compliant and should not be considered further Tender envelope Tenderer s name Reason No Keep the paragraph if clarificat
191. ro di testo per la 3 classe della media inferiore Libro di testo per la 1 classe dell istituto professionale tecnico Libro di testo per la 2 classe dell istituto professionale tecnico Libro di testo per la 3 classe dell istituto professionale tecnico Libro di testo per la 4 classe dell istituto professionale tecnico Libro di testo per la 5 classe dell istituto professionale tecnico Libro di lettura per la 1 classe della media inferiore Libro di lettura per la 2 classe della media inferiore Libro di lettura per la 3 classe della media inferiore Libro di lettura per la 1 classe dell istituto professionale tecnico Libro di lettura per la 2 classe dell istituto professionale tecnico Libro di lettura per la 3 classe dell istituto professionale tecnico Libro di lettura per la 4 classe dell istituto professionale tecnico Libro di lettura per la 5 classe dell istituto professionale tecnico 12 2 3 20 copies each HISTORY Topics covered Carry out not less than 50 of the following examples of topics e Libro di testo per la 1 classe della media inferiore Libro di testo per la 2 classe della media inferiore Libro di testo per la 3 classe della media inferiore Libro di testo per la 1 classe dell istituto professionale tecnico Libro di testo per la 2 classe dell istituto professionale tecnico Libro di testo per la 3 classe dell istituto professionale tecnico Libro di testo per la 4 classe dell istituto p
192. rofessionale tecnico Libro di testo per la 5 classe dell istituto professionale tecnico 12 2 4 20 copies each CHEMISTRY Topics covered Carry out not less than 50 of the following examples of topics e Libro di testo con esercizi per la 1 classe della media inferiore Libro di testo con esercizi per la 2 classe della media inferiore Libro di testo con esercizi per la 3 classe della media inferiore Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe dell istituto professionale tecnico Libro di testo con esercizi per la 5 classe dell istituto professionale tecnico 12 2 5 20 copies each PHYSICS Topics covered Carry out not less than 50 of the following examples of topics e Libro di testo con esercizi per la 1 classe della media inferiore Libro di testo con esercizi per la 2 classe della media inferiore Libro di testo con esercizi per la 3 classe della media inferiore Libro di testo con esercizi per la 1 classe dell istituto professionale tecnico Libro di testo con esercizi per la 2 classe dell istituto professionale tecnico Libro di testo con esercizi per la 3 classe dell istituto professionale tecnico Libro di testo con esercizi per la 4 classe
193. rojector Commercial and technical documentation different brands suppliers of the components and materials included in the kit ON O pD ES 11 2 1 Electronic development kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical exercises Analog Electronics circuits e Half and full wave rectifiers e Regulated power supplies with discrete components and integrated circuits e Amplifiers different types and configurations wide band selective class C complementary symmetry etc e Sinusoidal oscillators Meissner Hartley and Colpitts e Non sinusoidal oscillators astable monostable and bistable multivibrators and Schmitt trigger e Voltage regulators with UJT SCR DIAC and TRIAC e Circuits with operational amplifiers different configurations and filters and waveform generators Digital Electronics circuits e OR AND NOR NAND NOT ports with discrete components and IC e Combinatory logic circuits e Flip flop RS D JK JK Master Slave and Latch e Sequential logic circuits e 4 bit shift registers binary and decade counters decoders 7 segment drive multiplexer and demultiplexer etc 11 2 2 Operational Amplifier kit The electronic development kit should be installed on to the support as above mentioned Minimum Requirements Carry out not less than 50 of the following examples of practical ex
194. s or fraud 23 8 The purpose of suspending the contract shall be to verify whether presumed substantial errors and irregularities or fraud have actually occurred If they are not confirmed performance of the contract shall resume as soon as possible A substantial error or irregularity shall be any infringement of a contract or regulatory provision resulting from an act or an omission that causes or might cause a loss to the Community Italian Egyptian Integrated Technical Education Cluster budget MATERIALS AND WORKMANSHIP Article 24 Quality of supplies 24 1 The commodities to be supplied shall match the technical specifications laid down in the Special Conditions and shall totally suit drawings models samples and other requirements stated in the Supply Contract Such drawings models samples and other requirements shall be at disposal of the Technical Committee the Contracting Authority for identification and for the entire period of the Supply Contract execution 24 2 The Technical Committee shall give notice to the Contractor of the date and other details of the case for the preliminary technical test Such communication shall specify materials items and samples to be tested according to the Supply Contract the lot number and the testing place case by case Materials items and samples mentioned in the aforesaid notice shall be identified in accordance with the testing requirements before their installation 24 3 In the
195. s and estimates he shall carry out at no additional charge any work that is the subject of any item in his tender for which he indicates neither a unit price nor a lump sum Article 16 Tax and customs arrangements 16 1 For supplies to be imported into the country of the Contracting Authority all duties and taxes applicable to their importation shall be excluded 16 2 Whatever the origin of the supplies the contract shall be exempt from stamp and registration duties Article 17 Patents and licences Save where otherwise provided in the Special Conditions the Contractor shall indemnify the Contracting Authority against any claim resulting from the use as specified in the contract of patents licences drawings models or brand or trademarks unless such infringement results from compliance with the design or specification provided by the Contracting Authority COMMENCEMENT OF EXECUTION AND DELAYS Article 18 Commencement order 18 1 The Contracting Authority shall fix the date on which performance of the contract is to commence and advise the Contractor thereof either in the notice of award of the contract or by administrative order issued 18 2 Save where the Parties agree otherwise performance of the contract shall begin no later than ninety 90 days after notification of award of contract After that date the Contractor shall be entitled not to perform the contract and to obtain its termination or compensation for the damage he
196. sition and display of temperature e acquisition and display of gas pressure e acquisition and display of conductivity e acquisition and display of redox potential e acquisition and display of pH e acquisition and display of carbon dioxide concentration e acquisition and display of oxygen concentration in a gas e acquisition and display of concentration of solutions 33 Qty DIGITAL LEARNING RESOURCES for CHEMISTRY LAB Digital resources for Chemistry Lab in technical and professional schools students age 15 18 as a supporting learning tool of the Kit for practical exercises such as the simulation of the exercises supporting videos etc General Requirements e List of digital resources title and description e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e Documentation in Arabic and or Italian and or English Student practical guide with self evaluation Teacher support guide with evaluation sheet Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector 3 3 1 1 Chemistry Digital Learning Resources Set of 1 teacher and 24 students Minimum Requirements Carry out not less than 50 of the following subjects e Inorganic and organic chemistry e Analytical chemistry e Physical chemistry e _ Chemical processes 3 3 2 1 Data display application Set
197. sitions of the a m unit Equipped with 10 or more rectangular holes for electrical embedded boxes derivations boxes required for the practical exercises rear part of the panel components connected with plastic tubes support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described Technical Requirements components to be installed on the panels 1electrical key lock 1 unit for visualizing the calls 6 pushbuttons 250 V 10 A two of them with spy lamps 1 setof 6 A fuses with fuse holders 2 rings 1 buzzer 1 control transformer 230 12 24 V support plates and covers and all the required accessories for a complete and perfect installation of all the components in the panel above described 4 2 6 Video Telephone Intercom kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises Install set up and detect faults Video intercom links 2 wires system for 1 outdoor position 1 indoor position Install set up and detect faults Video intercom links 2 wires system for 1 outdoor position 2 indoor positions Install set up and detect faults of a video surveillance video camera Install set up and detect faults for Telephony electronic board for indoor system up to 6 extensions Install set up and detect faults of a combined use of indoor video int
198. sure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit 9 1 1 6 Building automation panel using a bus system kit Realize a simple home building automation system and control it General Requirements e Complete kit of components to design configure and assembly of a BUS electrical system KNX HBAC SCS KNX EIB e Wired and Wi Fi configuration of the circuit e User Manual and app notes Minimum Requirements Carry out the following examples of practical exercises e Control Lights resistive electronic loads RGB dimmer lights Control Motors for rolling shutters Control Air conditioning control Control Energy management system Control Socket Control Video surveillance Realize remote control from Internet for the supervision of the full system 9 2 Qty DIGITAL LEARNING RESOURCES for HOME and BUILDING AUTOMATION and RENEWABLE ENERGY General Requirements e Operating according a 2 0 educational scheme that includes presentation using o ooo en Gal 5 Integrated Technical Education Cluster at Fayoum A62 E Tec
199. t The supplies shall be packaged so as to prevent their damage or deterioration in transit to their destination 16 2 The packaging shall become the property of the recipient subject to respect for the environment 16 3 Sticker with the Logo of the Donor dim 12x9 cm must be placed on each of the equipment described in Article 1 1 of the Instructions to the Tenderers The colours are precisely defined with RGB palette R G B Green 0 128 1 White 255 255 255 Red 255 0 1 The Supplier shall mail to the Contracting Authority with a copy to the Insurance Company all the documents necessary to the delivery of the goods the list of these documents will be defined at the moment of the contract signature Article 17 Verification operations Training in Egypt The Supplier will organize at his own total cost a week training course in Egypt in the location of the destination on the use and general maintenance of the commodities provided Article 18 Provisional Acceptance 18 1 A Certificate of Conformity at final destination and of delivery shall be issued by the Contracting Authority upon correct delivery of the supply at final destination according to the Incoterm clause agreed 18 2 Starting from the date of such Certificate of Conformity at final destination and of delivery the commodities shall be considered delivered to the Contracting Authority which will be responsible of its good care 18 3 The Supplier at
200. t less than 50 of the following examples of practical exercises e Explore the functioning of a diode e Explore the functioning of a SCR e Explore the functioning of a Triac e Explore the functioning of a PWM MOSFET Chopper e Explore the functioning of a PWM IGBT Chopper e Explore the functioning of a linear PWM BJT Chopper e Explore the functioning of a semi controlled SCR single phase bridge e Explore the functioning of a power control with BUT e Explore the functioning of a power control with IGBT e Explore the functioning of a power control with MOSFET 7 2 2 AC DC non controlled diodes rectifiers kit 1 kW Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Explore the functioning of a single pulse rectifier direct polarization e Explore the functioning of a single pulse rectifier inverse polarization e Explore the functioning of a two pulse rectifiers cathodes connected e Explore the functioning of a two pulse rectifiers anodes connected e Explore the functioning of a three pulse rectifiers cathodes connected e Explore the functioning of a three pulse rectifier anodes connected e Explore the functioning of a six pulse rectifier cathodes connected e Explore the functioning of a two pulse bridge rectifier e Explore the functioning of a six pulse bridge rectifier 7 2 3 AC DC controlled SCR rectifiers kit 1 kW Minimum Requirements Carry out not less than 50 of the following examp
201. tation where possible with the Contractor The certificate of acceptance or rejection shall be drawn up within 30 days following the date on which such impossibility ceases to exist The Contractor shall not invoke these circumstances in order to avoid the obligation of presenting the supplies in a state suitable for acceptance 30 4 If the Contracting Authority fails either to issue the certificate of provisional acceptance or to reject the supplies within the period of thirty 30 days it shall be Italian Egyptian Integrated Technical Education Cluster deemed to have issued the certificate on the last day of that period except where the certificate of provisional acceptance is deemed to constitute a certificate of final acceptance In this case Article 30 5 below does not apply If the supplies are divided by the contract into lots the Contractor shall be entitled to apply for a separate certificate for each lot 30 5 In case of partial delivery the Contracting Authority reserves the right to give partial provisional acceptance 30 6 Upon provisional acceptance of the supplies the Contractor shall dismantle and remove temporary structures and materials no longer required for use in connection with the performance of the contract He shall also remove any litter or obstruction and redress any change in the condition of the place of acceptance as required by the contract 30 7 Goods are taken over by the Contracting Authority after the
202. ted with tin or copper Minimum Requirements e 200 ring terminal e 200 spade terminals 5 1 9 25 Setofwire nuts Wire nuts coated with tin or copper Minimum Requirements e 200 Wire nuts for 3x2 5 mmq cables e 200 Wire nuts for 3X4 mmq cables e 200 Wire nuts with screw for 3x2 5 mmq cables e 200 Wire nuts with screw for 3X4 mmq cables 5 1 10 20 Set of different electrical connectors and terminals Set with different type of connectors Minimum Requirements Including not less than 50 of the following types of terminals for a total of 000 terminals e 100 Terminals with screw clamp e 100 Terminals with spring clamp e 100 Terminals with insulation piercing e 100 Terminals for grounding e 100 Terminals sectionable e 100 Terminals with fuse holder e 100 Terminals with diode holder e 100 Terminals with fixtures e 100 Terminals with hook for profile DIN guide e 100 Terminals with direct fixing to the panel e 100 Guide terminal e 100 Terminals used in environments with a danger of explosion Ex e 100 Flying terminals in installations for residential use 5 1 11 24 Industrial marking system Printing systems for the industrial marking and their auxiliaries with a set of cards and pipes for cables Minimum Requirements e 1 000 Cards of different numbers and letters e 1 000 Pipes of different numbers and letters for 2 5 mmq cables e 1 000 Pipes of different numbers and letters for 4 mmq cables 5 1 12 25 Polyester conduit snakes Minimum Requireme
203. tee or what remains of it will be released within 7 days of the issue of the final acceptance certificate except for such part as may be specified in the Special Conditions in respect of after sales service The law applicable to this guarantee shall be that of Egypt Any dispute arising out of or in connection with this guarantee shall be referred to the courts of Egypt This guarantee shall enter into force and take effect upon its signature Name ssi sobre Position 0 Signature Date lt Date gt Italian Egyptian Integrated Technical Education Cluster IV ANNEX ADVANCE BANK GUARANTEE FORMAT On letterhead paper of the financial institution providing the guarantee Contract title Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program The undersigned name financial institution name address hereby declare that we will guarantee not merely jointly and severally but as principal debtor to Education Development Fund 13 Haroun St Dokki Giza Egypt on behalf of Supplier s name and address the payment of indicate the amount of the advance balance corresponding to the advance balance as mentioned in the Special Conditions without dispute on receipt of a first written request from the recipient The guarantee will enter into force and take effect from the i
204. ten percent 10 balance The security shall be released within sixty 60 days of the final acceptance of the supplies In case the Supplier does not request an advance payment the payments shall be made as follows respecting the provisions of the Special Conditions a Ninety percent 90 of the contract price following provisional acceptance of the supplies b Ten percent 10 of the contract price as payment of the balance outstanding following final acceptance of the supplies However this payment of ten percent 10 may if the Contractor so wishes can be carried out at the same time as the sixty five percent 65 instalment referred in previous clause 26 5 b if the Contractor provides a bank guaranteeing repayment of the full amount of the ten percent 10 balance The security shall be released within sixty 60 days of the final acceptance of the supplies 26 6 Where only part of the supplies has been delivered the sixty five percent 65 payment due following partial provisional acceptance shall be calculated on the value of the supplies which have actually been accepted and the security shall be released accordingly 26 7 For supplies not covered by a warranty period the payments listed above shall be aggregated The conditions to which the payments of pre financing interim and or final payments are subject shall be as stated in the Special Conditions 26 8 The payment obligations of the Contracting Authority und
205. ter VII 7 Tenderer s declaration lt To be completed on letterhead paper of the Tenderer gt Education Development Fund 13 Haroun St Dokki Giza Egypt Place and date In response to the invitation to tender for the Supply of electrical laboratory equipment services and digital learning resources for the ITEC in Fayoum in the frame of the Italian Egyptian Debt for development SWAP program we the undersigned hereby declare that e We have examined and accept in full the contents of the dossier for Invitation to Tender for the Supply of electrical laboratory equipment services and digital learning resources We hereby accept its provisions in their entirety without reservation or restriction In particular we have carefully read and we accept the assessment and evaluation of the Tenders as well as the scoring system of the tenders Articles 18 and 19 of the Instruction to Tenderers considering economic the DAP price and technical criteria Origin Compliance to decision N 768 2008 EC number of practical exercises Language and Content of digital resources e This tender is valid for a period of 120 calendar days from the final date for submission of tenders i e until 2013 e lf our tender is accepted we undertake to provide a performance guarantee of 5 as required by the Special Conditions e Our company has the following nationality eeann neen nnrrnnn nenne We are making this t
206. thdrawal of tenders 0 00 2 ee eeceeeeeeeeeeeeeeeeeeennaaeeeeeeeeeeeeennaeeeeeeeeees 11 A 16 Costs for preparing tenders and ownership of tenders 11 A 17 Opening of the fendefs claala ina 12 A 18 Assessment and Evaluation of the TENdErS ii 13 A 19 Evaluation and Scoring CHIerna tai ala 15 A20 Award NOCE e eee E eee A 17 A 21 Drawing up of the supply Contrai illa ati 17 A 22 Signing Of the supply COMMACE zii ear 17 A 23 Signature of the supply contract and Performance Guarantee 18 A 24 Contract MOUdIiGalioni rita 18 A 25 Tender Guarantee Esei naaa araea alal 19 A 26 Ethies clauses r ciaticteie iaia 19 A 27 Cancellation of the tender procedure i 21 A 1 Supplies to be provided 1 1 The subject of the contract is the supply delivery installation training after sales service by the Contractor of the List of Supplies to be provided according to the Technical Specifications detailed in Section E 1 2 The Tenderers which apply to this Tender commit themselves to deliver electrical laboratory equipment to ITEC in Demo Fayoum Governorate within 30 days from the date of coming into force of the Supply Contract and within 60 days from the date of signing the contract for selected lots and within 60 days from the date of coming into force of the Supply Contract and within 120 days from the date of signing the contract for the others as specified in Annex I
207. the guarantee Article 35 Termination by the Contracting Authority 35 1 The Contracting Authority or the Contracting Authority can at any time and with immediate effect cancel the Supply Contract remaining valid what stated in clause no 35 2 35 2 If not rules instructions are established the Contracting Authority or the Contracting Authority may cancel the Supply Contract notifying it to the Contractor upon a 7 days notice a In case the Contractor does not supply the goods in perfect compliance with the Supply Contract Italian Egyptian Integrated Technical Education Cluster b In case the Contractor does not comply within a reasonable time with the Technical Committee s injunction to remedy negligence or defaults in the Supply Contract s performance within the prescribed terms c In case the Contractor refuses or disregards to carry out the Person s in Charge s instructions d In case the Contractor transfers or sub supplies the Supply Contract or part of it e In case the Contractor goes bankrupt or becomes insolvent or is the object of a precautionary attachment or is entering into a composition with creditors or keeps on carrying out his activity under the direction of a receiver a trustee or an officer acting on behalf of creditors or goes into liquidation f In case a final sentence has been passed for an offence concerning the Contractor professional behaviour 9 In case other kinds of legal incapa
208. ther person not officially involved in this procedure 17 8 Any attempt by a Tenderer to affect the Evaluation Committee in the procedure of examination specification evaluation and comparison of the tenders and in the decisions concerning the identification of the most suitable tenders will cause the rejection of his tender 17 9 If a tender does not comply with the tender dossier the Evaluation Committee will reject it and it cannot be made suitable any more by any sort of amendment A 18 Assessment and Evaluation of the Tenders 18 1 The criteria for the technical and financial assessment and evaluation to be Italian Egyptian Integrated Technical Education Cluster carried out by the Committee are detailed in these instructions to Tenderers 18 2 The Evaluation Committee will carry out the assessment and evaluation concerning the compliance of tenders to the general requirements for qualification and eligibility criteria a the analysis and evaluation of the technical documentation in order to assess its wide correspondence with the technical specifications b the analysis of the financial proposal and its evaluation in comparison with the other tenders c the provisional awarding For the above mentioned exercises the Evaluation Committee will draw up the relevant minutes of meeting signed by all members 18 3 In order to proceed examining evaluating and comparing the tenders the Contracting Authority shall be able to re
209. ting Authority does not issue the certificate of provisional testing or does not reject the supplies within a period of thirty 30 days it is considered that he has issued the certificate on the deadline of the period and the certification of the Technical Committee will be valid The certificate of provisional testing is not the acknowledgement of the whole delivery of the supplies If the Supply Contract states that the supplies must be divided in lots the Contractor has the right to ask for single certificates for every lot 30 11 After the certificate s of provisional testing issue the Contractor shall dismantle and restore temporary plants and materials that are no more necessary for the Supply Italian Egyptian Integrated Technical Education Cluster Contract s execution He shall remove all obstacles and changes to the testing place In case the commodities are delivered according to IncoTerms clause DAP only they shall be transported from the selected Egyptian seaport to the location indicated in the Tender Document and taken over by the final beneficiary Consignee or a representative designated by the Contracting Authority After the commodities have been delivered according to Contract s clauses assembled and installed if the case a proper certificate of conformity is issued by the Technical Committee which survey the overall shipping procedures and also issues a Certificate of Conformity at loading and a Certificate of Disc
210. ting persons or parties shall include firms and companies and any organization having legal capacity Italian Egyptian Integrated Technical Education Cluster Article2 Law and language of the Supply Contract 2 1 The Special Conditions shall specify the law governing all matters not covered by the contract 2 2 The contract and all written communications between the parties will be drafted in the language of the procedure Article3 Order of precedence of contract documents 3 1 Save where otherwise provided in the special conditions the contract is made up of the following documents in order of precedence a the contract agreement b the Special Conditions with the Technical Annex c the Contractor s tender including annexes d the financial tender e the General Conditions Section B f the minutes of the information meeting site visit Addenda have the order of precedence of the document they are modifying 3 2 The different documents constituting the contract shall be deemed mutually explanatory in case of ambiguity or divergence they should be read in the order in which they appear above Article 4 Communications 4 1 Communications between the Contracting Authority and the Contractor shall be exclusively in writing Unless otherwise specified in the Special Conditions communications between the Contracting Authority and the Contractor shall be sent by post cable telex fax transmission or delivered by hand
211. tion powered with 380V 85Hz e Explore the functioning of a Field Oriented Drive e Explore the functioning of acceleration deceleration ramps e Explore the functioning of a torque control with different mechanical loads 7 2 7 3 Electrical machines education kit about 0 5 kW each machine General Requirements e Industrial type and performances e All parts equipped with quick action mounting system e All parts easily to align e All machine equipped with over temperature protection e All machine equipped with one shaft end with coupling piece suitable for the servo brake and drive unit e All connections on safety socket Minimum Requirements Carry out not less than 50 of the following examples of practical exercises e Connect and control a DC motor generator shunt machine e Connect and control a DC motor series machine e Connect and control a Universal motor e Connect and control single phase capacitor motor e Connect and control a three phase asynchronous motor 3 x 230 400V e Connect and control a three phase asynchronous motor 3 x 400 690V e Connect and control a synchronous machine 7 3 Qty DIGITAL LEARNING RESOURCE for INDUSTRIAL INSTALLATIONS Digital resources for Electrical Lab in technical and professional schools students age 15 18 General Requirements e Operating according a 2 0 educational scheme that includes presentation using interactive whiteboards theory simulations exercises and self evaluation tests e List of
212. to 1000 V AC Voltage 220 mV to 750 V DC Current 220 microA to 10 A AC Current 220 microA to 10 A Fuse protection Resistance 220 ohm to 220 Mohn 7 ranges Capacitance 25 nF to 220 mF Frequency 10 Hz to 220 MHz Special Functions diode test Continuity Temperature Duty Cycle Transistor hFE test Data Hold Peak Hold RS 232C Technical requirements digital oscilloscope 5 7 inches TFT LCD Color display two channels 100 MHz BW 250 MSa s real time and 25 GSa s equivalent time sampling rate Rise time 3 5 ns approx sensitivity 2 mV div to 10 V div Input coupling AC DC amp ground max 300 V DC AC peak Time 1 ns div to 50 s div 4 K memory per channel Save recall of settings and waveforms XY mode Pwr Supply 100 240 V 48 63 Hz Operating and maintenance manual Technical requirements instruments and tools required and common to different educational kit Generators and power supplies Set of RLC loads Set of brakes and mechanical loads Set of starts and shunt rheostats Control Measure boards panels connectors Sensors and actuators Stool for Students 7 1 2 12 Ergonomic and comfortable stool without arms and according to the height of the benches Minimum Requirements Rigid without rotation wheels and adjustable elements Heavy duty strong and secure construction 7 1 3 4 Sliding door storage unit Sliding door storage unit of coordinated design with the
213. tract a copy of the specifications and any other contractual document The Contractor may purchase additional copies of these drawings specifications and other documents according to availability Upon issuing the warranty certificate or upon final acceptance the Contractor shall return to the Contracting Authority all drawings specifications and other contract documents 7 2 Unless it is necessary for the purposes of the contract the drawings specifications and other documents provided by the Contracting Authority shall not be used or communicated to a third party by the Contractor without the prior consent of the Contracting Authority 7 3 The Contracting Authority shall have authority to issue to the Contractor administrative orders incorporating such supplementary documents and instructions as are necessary for the proper execution of the contract and the remedying of any defects therein 7 4 The special conditions must indicate the procedure used if necessary by the Contracting Authority to approve drawings and other documents provided by the Contractor Article8 Assistance with local regulations 8 1 The Contractor may request the assistance of the Contracting Authority in obtaining copies of laws regulations and information on local customs orders or byelaws of the country where the supplies are to be delivered which may affect the Contractor in the performance of his obligations under the contract The Contracting Authority m
214. tractor from the warranty or from any other obligation stated in the Supply Contract Article 30 Provisional acceptance 30 1 The supplies shall be taken over by the Contracting Authority when they have been delivered in accordance with the contract and they have satisfactorily passed the required tests or they have been commissioned as the case may be and when a certificate of provisional acceptance has been issued or it is deemed to have been issued 30 2 The Contractor may apply by notice to the Contracting Authority for a certificate of provisional acceptance when supplies are ready for provisional acceptance The Contracting Authority shall within thirty 30 days of receipt of the Contractor s application either a issue the certificate of provisional acceptance to the Contractor with a copy to the Contracting Authority stating where appropriate his reservations and inter alia the date on which in his opinion the supplies were completed in accordance with the contract and ready for provisional acceptance or b reject the application giving his reasons and specifying the action which in his opinion is required of the Contractor for the certificate to be issued 30 3 Should exceptional circumstances make it impossible to proceed with the acceptance of the supplies during the period fixed for provisional or final acceptance a statement certifying such impossibility shall be drawn up by the Contracting Authority after consul
215. ugh an addendum to the contract signed by all parties Changes of address or bank account may simply be notified in writing by the Contractor to the Contracting Authority Article 23 Suspension 23 1 The Contracting Authority may instruct by administrative order at any time the Contractor to suspend a the manufacture of the supplies or b the delivery of supplies to the place of acceptance at the time specified for Italian Egyptian Integrated Technical Education Cluster delivery in the performance programme or if no time specified at the time appropriate for it to be delivered or c the installation of the supplies which have been delivered to the place of acceptance 23 2 The Contractor shall protect and secure during suspensions the concerned supplies at the Contractor s warehouse or elsewhere against any deterioration loss or damage to the extent possible and as instructed by the Contracting Authority So even if the supplies have been delivered to the place of acceptance in accordance with the contract but their installation has been suspended by the Contracting Authority 23 3 Additional expenses incurred in connection with such protective measure shall be added to the contract price The Contractor shall not be paid any additional expenses if the suspension is a dealt with differently in the contract or b necessary by reason of normal climatic conditions at the place of acceptance or c necessary owing to som
216. with 2 alarm lines and manual alarms self powered by internal batteries 2 x 12 Vdc Power supply 230 Vac and outputs for the sensors and the actuators e Sensors 1 pushbutton glass encapsulated 1 24 Vdc optical smoke sensor 1 24 Vdc electronic temperature sensor 1 extinguisher surveillance contact e Actuators 1 24 Vdc 2 tones siren over 90 dB 1 m 1 3 W blinker 24 Vdc 1 24 Vdc firewall doors 4 2 8 Electrical risks and protection simulation panel Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises e Simulation of an Electrical power distribution systems Simulation of the most important protection devices Simulation of safety and protection methods and grounding Simulation of TT TN IT distribution systems RCB principle Advantages and trip times and current tests Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 14 of 48 Simulation of Protection systems grounding RCB Selectivity and hierarchy of the protection devices insulation resistance measurement ground resistance measurement continuity test on protection wires Resistance impedance measure on the faulty loop Technical Requirements simulation panel with installed components steel structure epoxy painted with a robust long anti tilting legs with rubber feet electrical comp
217. wo way switches reversing switches switch with motion sensor passive infrared switch with light sensor possibility of exclusion timing circuit for adjustable off delay ex from 30 seconds to 10 minutes 4 2 4 Anti theft control kit Technical Requirements practical exercises Carry out not less than 50 of the following examples of practical exercises anti theft circuits topology performance levels of the anti theft systems Installation set up and fault identification of sensors specifically used in anti theft systems IR microwave technology presence sensor Installation set up and fault identification of sensors specifically used in anti theft systems passive infrared presence IR sensor Installation set up and fault detection of sensors specifically used in anti theft systems magnetic detector Installation set up and fault detection of sensors specifically used in anti theft systems vibration detector Installation set up and fault detection of actuators specifically used in anti theft systems indoor and outdoor sirens Installation set up and fault detection of actuators specifically used in anti theft systems Self powered sirens Installation set up and fault detection of electronic control boards Setting lines protected zones remote keyboards and magnetic switches Install an anti theft circuit for one zone protection Install an anti theft circuit for two zones protecti
218. workbench to accommodate panels with practical exercises under completion Minimum Requirements e Dimension about 180Hx60Wx95L cm e Lockable e Heavy duty type e Sliding door 72 Qty KITS for PRACTICAL EXERCISE General Requirements for each kit 1 Box with equipment to carry out the practical exercises 2 Box with spare parts to repeat the practical exercises of the kit a minimum of 30 times only wear and tear should be considered Vertical panel Commercial datasheet for each component and material included in the box List of practical exercises title and description that can be carried out Documentation in Arabic and or Italian and or English for each practical exercise Safety recommendations during the preparation execution and closure of practical exercises Student practical guide with self evaluation for each practical exercise Teacher support guide with evaluation sheet for each practical exercise Teaching support documentation including simulations and models CD Cnt ges CS Integrated Technical Education Cluster at Fayoum A62 E Technical SpecificationsEDF Fayoum ITEC International Tender 4 2013 Page 23 of 48 Teaching support software to be used on smart boards with projector Commercial and technical documentation different brands suppliers of the components and materials included in the kit 7 2 1 Power devices kit 0 5 kW Minimum Requirements Carry out no
219. y have been delivered in compliance with the Supply Contract have successfully passed the required tests have been assembled if the case and a certificate of provisional testing has been issued 30 8 The Contractor shall be able to ask the Contracting Authority in writing a certificate of provisional testing with a maximum advance of fifteen 15 days from the date when according to the Contractor the goods will be ready for provisional testing Within thirty 30 days from the receipt of the Contractor s request the Contracting Authority shall a Send to the Contractor and copy to the Contracting Authority the certificate of provisional testing pointing out any possible reservations and the date when in its opinion goods were ready for provisional testing in compliance with the Supply Contract or b Refuse the request justifying the decision and stating what in its opinion the Contractor shall do for the certificate release 30 9 In case unpredictable circumstances hamper the testing of goods in the period chosen for provisional or final testing the Contracting Authority by mutual consent if possible with the Contractor writes down a report about such circumstances The testing or the refusal certificate shall be issued within thirty 80 days from the date obstacles to goods testing cease to exist The Contractor shall not refer to the aforesaid circumstances to avoid goods availability for testing 30 10 If the Contrac
220. y payment connected with the contract other than that provided for therein The Supplier and its staff must not exercise any activity or receive any advantage inconsistent with their obligations to the Contracting Authority 26 7 The Supplier and its staff are obliged to maintain professional secrecy for the entire duration of the contract and after its completion All reports and documents drawn up or received by the Supplier are confidential 26 8 The contract shall govern the contracting parties use of all reports and documents drawn up received or presented by them during the execution of the contract 26 9 The Supplier shall refrain from any relationship likely to compromise its independence or that of its staff If the Supplier ceases to be independent the Contracting Authority may regardless of any collateral cost terminate the contract without further notice and without the Supplier having any claim of compensation 26 10 The Contracting Authority reserves the right to suspend or cancel the contract if corrupt practices of any kind are discovered at any stage of the award process For the purposes of this provision corrupt practices are the offer of a bribe gift gratuity or commission to any person as an inducement or reward for performing or refraining from any act relating to the award of a contract or implementation of a contract already concluded with the Contracting Authority 26 11 Tenders will be rejected
221. y towards us should it do so Yours faithfully Name and first name lt cece cece eee e cece eee eeaeeeenaeeeenaeennaeetenaeetnnaeengs gt Duly authorised to sign this tender on behalf of Place and dale sic sorsero rato dedita ER gt Stamp of the firm company This tender includes the following annexes lt list of annexes provided by the tenderer gt Italian Egyptian Integrated Technical Education Cluster Vill ANNEX GLOSSARY OF TERMS Administrative order any instruction or order issued by the Contracting Authority to the Supplier in writing regarding the provision of the supplies Agent Bank the Bank to which the Education Development Fund conferred a mandate to execute the payments Bill of quantities the document containing an itemized breakdown of the items and tasks to be carried out in a unit priced contract indicating a quantity for each item and the corresponding unit price Bond Guarantee for the terms of this Tender is the guarantee for a debt or an advance received in which an issuer a bank or a bonding company guarantees to honour the debt of a supplier and it is obliged to pay the creditor at a later date if so requested A bond is a formal contract to repay borrowed money by a third guarantor in case of failure by the original debtor Supplies goods supplies all items which the Supplier is required to supply to the Contracting Authority including where necessary service such as install

Download Pdf Manuals

Related Search

Related Contents

MOVITRAC® B Safe Disconnection - Conditions - SEW    Scellant pénétrant pour maçonnerie TVIS  ÄKTApurifier 10 to ÄKTApurifier 100 Upgrade kit  national radio astronomy observatory pci  SIGEM – MODE D`EMPLOI CONCOURS 2014 Procédure  

Copyright © All rights reserved. Failed to retrieve file