TSA-6000 Feature Summary
Contents
1. Bit inversion Stuffed Mark Bits Checksum errors FSK Signal To Noise Ratio SNR Interference tones FSK delay for Type 2 Caller ID All decoded FSK data bytes can be displayed as HEX ASCII or as the named decoded Message Types Parameters Types and Data e g Calling Name Parameter e Decoded data is also displayed in a easy to read format as would be seen on a Caller ID CPE display e Out Of Spec signaling parameters are highlighted in RED In addition to the FSK signaling parameters the base TSA 6000 software provides analysis of e CAS CPE Alerting Signal parameters duration frequencies amplitude twist noise e DTMF ACK parameters duration frequencies amplitude twist noise e Ringing parameters voltage max min RMS frequency duration DC 3 3 SMS Software Module ETSI Protocol 1 Short Messaging Services SMS protocols are defined by ETSI for land line SMS services The TSA 6000 SMS Software Module P1 supports decoding of ETSI Protocol 1 messages and parameters and all decoded data is displayed in an easy to read format The FSK signaling analysis described for the Caller ID Software Module is also provided in the SMS Software Module AS I gt J K Embedded Systems Roducts D TSA 6000 System Features Summary 3 4 SMS Software Module ETSI Protocol 2 Short Messaging Services SMS protocols are defined by ETSI for land line SMS services The TSA 6000 SMS Software Module P2 supports decoding of ETS2. Duration ms Generate 60 Amp High dB Amp Low dB Freq High Hz Freg Low Hz SFI Freq Hz SFI Amp dB Poo eoo e e e TSA 6000 Terminal Adapter Test Interface AS TD Embedded Systems Products Ann Labs 10
3. to an excel readable CSV file All DTMF parameters are measured and recorded including Frequencies Amplitudes Total power Twist Duration Inter digit timing Distortion note DTMF distortion measurements are only available with this software module Dial Pulse signals will also be automatically analyzed with the relevant timing make time break time inter digit timing output into a exportable data file 3 8 Wave Exporter Module This module is used to export the AC component of captured files into wave files AS T gt J Embedded Systems Products TSA 6000 System Features Summary 3 9 P 56 Speech Level Module This module is used to measure active speech levels of recorded files Uses the ITU P 56 method B algorithm ASTD Embedded Systems pe TSA 6000 System Features Summary 3 10 Terminal Adaptor Module This module is used to test the analog portion of Terminal Adaptors This includes ADSL and set top box VoIP terminals adapters There are many issues with compatibility of terminal adaptor devices when connecting to the existing installation of analog telephones CPE equipment The following tests are provided e DTMF Generation single digit O 0 0006 Control of individual parameters of Tone frequencies Tone amplitudes and twist Duration Single frequency interference e Pre configured DTMF Test Suites O Q 00000006 Group 1 Nominal parameters Group 2 All parameters at 100 of
4. Embedded ae ae TSA 6000 System Features Summary 3 TSA 6000 Software The TSA 6000 software runs on a PC based system running Windows 95 or later supported The TSA 6000 software provides the following capabilities Connection to the TSA 6000 hardware for signal file upload Analysis of captured signals using the powerful TSA 6000 analysis Software Modules Playback of captured signals on the PC speakers Playback of recorded Voice Notes on the PC speakers 3 1 Network CPE Signal Analysis Software Module The TSA 6000 Base System includes the powerful Network CPE Signal Analysis Software Module which has the following features e Zooming vertical voltage and horizontal time of any captured signal Browser like controls for back forward to previous zoom views Accurate timing measurements using cursors Time synchronization of AC coupled and DC coupled signal capture buffers FFT Analysis of any selected signal segment Filtering of captured signals before analysis lowpass highpass bandpass Automatic detection display and analysis of telephony signals All signal detection parameters can be redefined by the user or the system defaults can be used The following signals are automatically detected by the TSA 6000 Network CPE Signal Analysis Software Module When a signal is detected it is displayed on the screen and the signaling parameters are shown with the detected signal The criteria used to automatically
5. detect each signal is controllable by the user e Dialtone level and frequency Stutter Dialtone level frequency and cadence Busy Tone level frequency and cadence Ringback Tone level frequency and cadence FAX CNG and CED Tones level frequency and duration Single Frequency Tones level frequency and duration any frequency tone DTMF frequency amplitude twist duration CAS frequency amplitude twist duration SAS frequency amplitude duration Noise single frequency interference tones Ringing level and cadences Power Line Harmonics DC level changes for Extension In Use On hook Extension In Use EIU checks for Type 2 CID Flash signal timing Open Switching Interval OSI timing level Line Reversals Voltage Message Waiting Signals AS I gt J K Embedded Systems Roducts D TSA 6000 System Features Summary 3 2 Caller ID Software Module The TSA 6000 Caller ID Software Module supports detection of signals and decoding data for Caller ID signaling for the TIA 777A Bellcore SR 3004 and the ETSI EN 300 659 signaling and data formats Both Type 1 On Hook and Type 2 Off Hook Caller ID are supported The following parameters are automatically detected and the signaling parameters and data displayed e FSK Mark and Space amplitude and frequency FSK Twist FSK Baud Rate Channel Seizure delay Channel Seizure length Channel Seizure dropout Mark preamble length Mark preamble dropout Start Stop framing errors
6. simple non triggered signal capturing Line Termination to terminate line and decode Type 2 Off Hook Caller ID Monitor mode Listen to telephone signals on speaker play back recorded signal files Rugged and lightweight case 2 1 Signal Capture Capture and record signaling at the customer premise or anywhere on the customer loop Simple to use one button recording Add Voice Notes to any data file for playback locally or with TSA 6000 PC based Analysis Software Upload recorded signal files to TSA 6000 Analysis Software via modem or serial port Line Termination switch hook to terminate line and decode Type 2 Off Hook Caller ID Monitor mode Listen to telephone signals on speaker and play back recorded data files Separate AC and DC coupled signal capture channels AS I gt J K Embedded Systems Roducts D TSA 6000 System Features Summary 2 2 Hardware Specifications AC Coupled Channel DC Coupled Channel Telephone Interface e Dynamic Range e Dynamic Range e On hook Off hook Control 4 Vpp 400VDC e 1 Mohm DC min On Hook e Sample Rate e Sample Rate e 200 ohm DC 5 Off Hook 16 k samples sec 1K samples sec e 200 k ohm AC min On Hook e 100Hz 7KHz 1dB e DC 150Hz 0 5dB e 600 ohm AC 5 Off Hook e Sensitivity 60dBm 2 3 Approvals for Use The following regulatory approvals have been obtained for the TSA 6000 Signal Recording Unit FCC Part 15 Class A e CSA 60950 e CE Mark ASTD
7. I Protocol 2 messages and parameters and all decoded data is displayed in an easy to read format The FSK signaling analysis described for the Caller ID Software Module is also provided in the SMS Software Module 3 5 ADSI Software Module The Analog Display Services Interface is defined in Bellcore TR 1273 and SR 2461 ADSI signaling is similar to Caller ID signaling using FSK and DTMF ADSI signaling is more complex including handshaking error detection acknowledgment signals and a longer list of data parameter types defined The ADSI Software Module will automatically decode all ADSI parameters and display the data in an easy to read format The FSK signaling analysis described for the Caller ID Software Module is also provided in the ADSI Software Module 3 6 Russian Caller ID Software Module Russian Caller ID uses a unique signaling method whereby a sequence of concatenated dual tone signals similar to DTMF are sent by the CO switch after a signaling handshake is completed The Russian Caller ID Software Module displays all signaling parameters for the digits decoded and also shows the decoded meaning of each digit sequence 3 7 DTMF and Dial Pulse Analysis Software Module This module is used for convenient analysis of DTMF signals The features are used by activating this module and capturing DTMF signals and then selecting the Automatic Analysis option The TSA software then displays a formatted text display which can be saved exported
8. Protocol 1 SMS Software Module ETSI Protocol 2 ADSI Software Module Russian Caller ID Software Module Additional software modules may become available as development continues due to customer requests 1 4 TSA 6000 Hardware Options The TSA 6000 has the following optional items that may be purchased separately e Padded carrying case e AC adapters specify country voltage and frequency AS T gt 2 Embedded Systems Products TSA 6000 System Features Summary 2 TSA 6000 Hardware The TSA 6000 hardware is a stand alone unit which is lightweight and portable used to connect to a telephone line to capture telephony signaling Field Upgradeable Firmware via the RS 232 port Serial port 115200 baud for direct connection to a computer Modem V 90 56k for remote file upload to a TSA 6000 host computer LCD with backlight for control and local display of Type 1 and Type 2 Caller ID RJ 11 jacks for easy connection to the line Battery 7 2V NiMH 2700 mAH or AC adapter 12V 1A class 2 operation Auto switch to battery mode if power loss and battery fault protection Large non volatile Flash memory 256 Mbit up to 20 minutes of signal capture Automatic naming and time stamping of each captured signal file up to 256 files Simultaneous signal recording using AC coupling and DC coupling with time synchronization Signal Capture Trigger Options FSK Ringing Off Hook and several others Start Stop button for
9. TIA 470 C allowable tolerance individual parameters Group 3 All parameters at 100 of TIA 470 C allowable tolerance all combinations Single Frequency Interference SFI All digits with SFI from low to high level Amplitude variation Duration variation Twist variation Inter digit delay variation Frequency only variation e Flash Signal Generation O Test Suite with Flash duration varied from 300 ms to 1500 ms e Extension In Use Generation O O Test Suite with duration varied from 3 ms to 20 ms Test Suite with ACK Delay varied from 0 ms to 150 ms e Ringing Signals O Can be tested with the base TSA 6000 software ringing analysis capabilities e DC voltage Characteristics O Can be tested with the base TSA 6000 software analysis capabilities 3 Embedded Systems Products TSA 6000 System Features Summary 2 TSA6000 Device 0421593095 E m Status AC Vpeak 0 00 DC V 0 1 Idle Offhook Record E stop Co Hookswitch Speaker Triggers Phone Functions Tone Generator SDT Detection ATA ATA Log Auto DTMF Tests Test Digit s ALL X MV Groupi IV Sensitivity dBm IV Inter Digit Pause ms IV Group 2 IV Twist dB IV Frequency Hz IV Group3 IV Duration ms v SFI dBm m Flash Tests EIU Checks Duration ms I Duration ms I Ack Delay ms Total Test 1216 Estimated Time 44 32 Start Manual Test DTMF v
10. TSA 6000 System Features Summary 2006 03 01 1 TSA 6000 Introduction EE ncaa dastceantanpecetongacencasind testi danyatcanebdesdnedeasenceneoiebene 2 1 1 TSA 6000 VEVEN use kinnene 2 1 2 TEA 6000 Base SEN een 2 1 3 TSA 6000 Software Options vvauvesesrme send snadaandannten 2 1 4 TSA 6000 Hardware Options sia ctsccesccecicesescsecedsehdaadesesbeauideieoeberese cde cavasctteresdateennaueass 2 gt TN 3 2l Signal Capture EE RR AE Ea a a t A EE a aE ESE aE i 3 2 2 Hardware Specifications GAS 4 2 3 Approvals for ISG Lasse caagyvete tadssseGeetacadenceareicncevenapectenecanseede 4 3 TSA 6000 Software EE EE ace saceebs csghn ceubeectbeaaatetecmeectetent 5 3 1 Network CPE Signal Analysis Software Module rarrrrrnrnrnnnrnnnrnnnvrnnnnrvrrrrnnnrrrrrnnnnnnrnnnnnn 5 3 2 Caller ID Software Module rnnnrnnnnnnnvnnnnnnnvnnnnnnnavnnnnnnnnnnnnnnnnnnennennnnnnnnennnnennnnrnnnennnnnnanennnnne 6 32 SMS Software Module ETSI Protocol Lassvatarsuneaaraanu passes 6 3 4 SMS Software Module ETSI Protocol 2 uLansasaremmsenanvmuaneerjesvvinnvuenn 7 3 5 ADS Software MOG Esisi a E E E A aa Ae E E manke 7 3 6 Russian Caller ID Software Module rrnnnvnnnnnnnnvennnnnnnnnnnnnnnnnennannnnnnnnensnnnnnnernnnennnnnnanennnnne 7 3 7 DTMF and Dial Pulse Analysis Software Module rrrrrrrnnnonnrrrnnnnnnrrnnnnnnnnnnnnnnnnnrnnnrnnnrnnnennn 7 3 8 Wave Exporter Module 2 cae ence cas ciccesstl ase cceeseaces tanh stein dans scatinndscesdensn
11. vesseetedhccesteanencesavecneass 7 3 9 P56 Speech Level Modul ruuvmusrasimisuenisntkindeminineemivmidenmemidumetdde 8 3 10 Terminal Adaptor MODE cxhcssatdecancixeact tonnes ecdesat anegeaseninoad wedoateanecennaramsesteratdienemecen 9 AS TD Embedded Systems Products Ben Labs Coire TSA 6000 System Features Summary 1 TSA 6000 Introduction 1 1 TSA 6000 Overview The TSA 6000 Telephone Signal Analysis system includes hardware and software for capturing and analyzing telephony signals including Caller ID and other telephony related data signals on any analog telephone line The TSA 6000 Base System includes the hardware and the Network CPE Signal Analysis Software Module capable of Tone Ringing Timing FFT analysis and more Additional software modules are available for specific decoding or protocol analysis see below More information regarding the system capabilities specifications and demonstration software may be obtained by visiting www TSA6000 com 1 2 TSA 6000 Base System The TSA 6000 Base System includes the following 1 TSA 6000 Telephone Signal Recorder hardware 1 6 RS232 cable Network CPE Signal Analysis Software Module User Guide for hardware operation Software user s manual is provided in the software 1 3 TSA 6000 Software Options The TSA 6000 has the following software modules that may be purchased separately Caller ID Software Module SMS Software Module ETSI
Download Pdf Manuals
Related Search