User Manual for SCILOGEX MS7-H550-S Hotplate-Stirrer
Contents
1. 500 Four Rod Road Suite 122 Berlin CT 06037 USA Tel 1 860 828 5614 Fax 1 860 828 5389 E mail info scilogex com Website Http www scilogex com Please provide the customer care representative with the following information Serial number on the rear panel Certification Description of problem i e hardware or software Methods and procedures adopted to resolve the problems Your contact information Warranty This instrument is warranted to be free from defects in materials and workmanship under normal use and service for a period of 24 months from the date of invoice The warranty is extended only to the original purchaser It shall not apply to any product or parts which have been damaged on account of improper installation improper connections misuse accident or abnormal conditions of operation For claims under the warranty please contact your local supplier You may also send the instrument directly to manufacturer enclosing the invoice copy and by giving reasons for the claim 1 Safety Instructions Warning e Read the operating instructions carefully before use Ensure that only trained staff works with the instrument Risk of burn e Caution when touch the housing parts and PB the hotplate which can reach temperature of 550 C Pay attention to the residual heat after switching off Protective ground contact sa e protective ground contact before use2. and to be inserted in the media before heating The heating function will be stopped automatically under abnormal conditions Please operate follow the instructions below e Switch OFF the instrument Ensure the external temperature sensors is inserted in the media heated e Switch ON the instrument and run heating function If the heating function did not work please contact manufacturer supplier for technical support Warning A Forbid to plug in pull out external temperature sensor in heating 7 Faults Instruments can not be power ON If Check whether the power cable is plugged in Check whether the fuse is broken or loose these faults are not resolved please contact manufacturer supplier 8 Maintenance and Cleaning Proper maintenance can keep instruments working properly and lengthen its lifetime Do not spray cleanser into the instrument when cleaning Unplug the power line when cleaning Only use recommended cleansers Dyes Isopropyl alcohol Construction materials Water containing tenside Isopropyl alcohol Cosmetics Water containing tenside Isopropyl alcohol Foodstuffs Water containing tenside Fuels Water containing tenside Wear the proper protective gloves during cleaning of LED Digital 7 Square Hotplate Stirrer the instrument Before using other method for cleaning or decontamination the user must ascertain with the manufactu
3. pole Motor 15 1 5 0 1500 Scale Glass ceramic 184x184 1000 RT 550 LED 1 he safety temperature of the hotplate C Temperature sensor in medium Control accuracy of heating temperature with temperature sensor C Residual heat warning Dimensions mm Weight kg Permitted ambient temperature C Permitted relative humidity Protection class acc to DIN 60529 580 PT1000 0 5 50 C 215x360x112 4 5 3 8 5 40 8096 IP21 Hotplate model Table 3 10 LED Digital 7 Square Hotplate Stirrer 11 Ordering information Cat No Descriptions 813221009999 813221019999 813221029999 813221039999 813211009999 813211019999 813211029999 MS7 H550 S LED Digital 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate USA plug 110V 50Hz 60Hz MS7 H550 S LED Digital 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate Cn plug 220V 50Hz 60Hz MS7 H550 S LED Digital 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate Euro plug 220V 50Hz 60Hz MS7 H550 S LED Digital 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate UK plug 220V 50Hz 60Hz MS7 S Classic 7 Square Plate Magnetic Stirrer glass ceramics plate USA plug 110V 50Hz 60Hz MS7 S Classic 7 Square Plate Magnetic Stirrer glass ceramics plate Cn plug 220V 50Hz 60Hz MS7 S Classic 7 Square Plate Magnetic Stirrer glass
4. LED Digital 7 Square Hotplate Stirrer User Manual MS7 S Classic 7 Square Plate Stirrer MS7 H550 S LED Digital 7 Square Hotplate Stirrer Please read the User Manual carefully before use and follow all operating and safety instructions www scilogex com SCILOGEX 12300085 Contents Pretacez aiti ettet eade 1 DEMVICE RE 1 Warranty alieni alici eee P al dali 1 1 Safety Instructions i 2 2 JProper USC ab see eR 3 Seo JBSpectOns ine rei ee eie eei 4 3 1 Receiving Inspection eese 4 3 2 Tasting of Items eene Renta 4 4 Control iiic mns 4 4 1 Control elements eee 4 4 2 Display Hotplate Model 6 De Eriabf n eoe Hp etre ees 6 6 Working with external temperature sensor Hotplate Model i5 itenik etti e rr trt etd 7 Teo Eaultez onore Eee et aret o Ns 8 8 Maintenance and Cleaning eee 8 9 Associated standards and regulations 9 10 3T chnical data int tet rettet 9 11 LED Digital 7 Square Hotplate Stirrer Preface Welcome to the LED Digital 7 Square Hotplate Stirrer Users should read this Manual carefully follow the instructions and procedures and be aware of all the cautions when using this instrument Service When help needed you can always contact the Service Department of manufacturer for technical support in the following ways SCILOGEX LLC
5. Make sure that socket must be grounded When working wear personal safety guards to avoid the risk from Splashing and evaporation of liquids Release of toxic or combustible gases Set up the instrument in a spacious are on a stable clean non slip dry and fireproof surface Do not operate the instrument in explosive atmospheres with hazardous LED Digital 7 Square Hotplate Stirrer substances or under water Gradually increase the speed reduce the speed if Stirring bar breaks away due to high speed The instrument is not running smoothly or container moves on the base plate Temperature must always be set to at least 50 C lower than the fire point of the media used Be aware of hazards due to Flammable materials or media with a low boiling temperature Overfilling of media Unsafe container Process pathogenic materials only in closed vessels Check the instrument and accessories prior to each use Do not use damaged components Safe operation is only guaranteed with the accessories described in the Accessories chapter Accessories must be securely attached to the device and can not come off by themselves Always disconnect the plug before fitting accessories When the external temperature sensor needed the tip of the measuring sensor must be at least 5 10mm from vessel bottom and wall LED Digital 7 Square Hotplate Stirrer The instrument can only be disconnected from the main
6. al 7 Square Hotplate Stirrer LConnecllon PT1000 chee Hotplate model OSSE Figure 5 E MGR Items Descriptions eret LED Stir Speed control Knob The stirring function is switched ON or OFF by rotating the knob Figure 3 Temperature control The heating function is switched knob Hotplate ON or OFF by rotating the knob If rotate the heating knob LED displays the temperature setting LED Hotplate value and shift to real value in the duration of 5 seconds Power Switch When the heating function is LED Heat Hotplate switched ON the LED Heat flash Figure 4 When the instrument is LED Stir switched ON the LED Stir is lit eh SICA ON or OFF the instrument Table 2 4 2 Display Hotplate Model LILILI LLLELI Figure 6 lt Display area Display Descriptions When the heating function is switched ON and rotate the stirring knob LED displays the Dicey temperature setting value and shifts to real value in 5 seconds When the heating function is switched OFF and area the hotplate temperature is still above 50 C LED displays Hot otherwise LED displays 0 LED Digital 7 Square Hotplate Stirrer 5 Trial run Make sure the required operating voltage and power supply voltage match Ensure the socket must be properly grounded Plug in the power cable ensure the power is on and begin initializing Add the medium in
7. ceramics plate LED Digital 7 Square Hotplate Stirrer Cat No Descriptions Cat No Descriptions Euro plug 220V 50Hz 60Hz reaction vessel 017 75mm 26mm MS7 S Classic 7 Square Plate depth 813211039999 Magnetic Stirrer glass ceramics plate MS135 7 Golden quarter pie 4 holes UK plug 220V 50Hz 60Hz 18900049 16ml reaction vessel 021 6mm 31 7mm Accessories depth PT1000 Temperature sensor for digital Table 4 18900016 hotplate model used for Pro MS7 H550 Pro amp MS7 H550 S 230mm PT1000 Temperature sensor for digital 18900084 hotplate model used for Pro MS7 H550 Pro amp MS7 H550 S 100mm 18900017 Support clamp of PT1000 MS135 2 Red quarter pie 11 holes 4 ml 18900002 i reaction vessel 415 2mm 20mm depth MS135 3 Purple quarter pie 4 holes 20 18900003 ml reaction vessel 28mm 24mm depth MS135 4 Blue quarter pie 4 holes 30 ml 18900004 reaction vessel 028mm 30mm depth MS135 5 Black quarter pie 4 holes 40 18900005 ml reaction vessel 28mm 43mm depth 18900048 MS135 6 Green quarter pie 6 holes 8ml 11 SCILOGEX LLC 500 Four Rod Road Suite 122 Berlin CT 06037 USA Tel 1 860 828 5289 Fax 1 860 828 5389 E mail info dragonlabusa com Website Http www scilogex com
8. power supply by pulling out the main or the connector plug The voltage stated on the label must correspond to the main power supply Ensure that the main power supply cable does not touch the hotplate Do not cover the device Forbid to put pressure and over heat media on the surface of glass ceramic that can be caused surface broken The instrument may only be opened by experts Keep away from high magnetic field 2 Proper use The instrument is designed for mixing and or heating liquids in schools laboratories or factories Observe the minimum distances between the devices between the device and the wall and above the assembly min 100 mm Figure 1 This device is not suitable for using in residential areas or other constraints mentioned in Chapter 1 3 Inspection 3 1 Receiving Inspection Unpack the equipment carefully and check for any damages which may have arisen during transport Please contact manufacturer supplier for technical support Note AN If there is any apparent damage to the system please do not plug it into the power line 3 2 Listing of Items The package includes the following items Items Qty Main unit 1 Power cable 1 User Manual 1 Table 1 LED Digital 7 Square Hotplate Stirrer 4 Control 4 1 Control elements LED heat Hotplate model LED Heating Knob Hotplate model Stirring Knob LED Stir Hotplate model Figure 2 LED Digit
9. rer that this method will not harm the instrument Send in the case of service the instrument back in the packaging carton Storage packing is not sufficient for the back dispatch Use additionally a suitable transportation packing The enamel makes the hotplate easier to care for and more resistant to acids and bases Because of it however the hotplate is also more susceptible to extreme fluctuations in temperature and the force of impact This can result in cracks forming or the coating flaking off Warning Cut off power when maintenance and cleaning LED Digital 7 Square Hotplate Stirrer 9 Associated standards regulations and Construction in accordance with the following safety standards EN 61010 1 UL 3101 1 CAN CSA C22 2 1010 1 EN 61010 2 10 Construction in accordance with the following EMC standards EN 61326 1 Associated EU guidelines EMC guidelines 89 336 EWG Instrument guidelines 73 023 EWG 10 Technical data Voltage VAC Frequency Hz Power W Stirring point position quantity Max stirring quantity H20 1 Max magnetic bar Lx mm Motor type Max power input of motor W Max power output of motor W Speed range rpm Rotary speed display Plate material Dimensions of workplate mm Heating power W Temperature range C Temperature display C Temperature display accuracy C 100 120 200 240 50 60 1030 30 1 10 80x10 Shaded
10. to the vessel with an appropriate stirring bar Place vessel on the work plate Clockwise rotate the stirring knob slowly to set the rated rotary speed in the safe speed range from 0 to 1500rpm and start stirring function Clockwise rotate the heating knob slowly to set the rated temperature in the safe range from room temperature to 550 C and start heating function hotplate model Begin the heating and stirring functions If these operations above are normal the device is ready to operate If these operations are not normal the device may be damaged during transportation please contact manufacturer supplier for technical support LED Digital 7 Square Hotplate Stirrer Warning Forbid to transfer the vessel when the instrument working 6 Working with external temperature sensor Hotplate Model Figure 7 The external temperature sensor PT1000 is the Manufacture s standard accessory If the sensor is plugged in and rotate the heating knob LED displays the temperature setting value and shifts to real value in 5 seconds Safe circuit controls hotplate temperature Comparing with the temperature control of the hotplate the external temperature sensor can control the medium s temperature more precisely If external temperature sensors needed it must be plugged in before the device is switched ON Ensure the external temperature sensors connecting firmly
Download Pdf Manuals
Related Search