Q-MIX3 2 Channel Compact Mixer
Contents
1. ck output device gain control and volume control is not set too high low No input output Check Line2 3 level control is turned up Errors and omissions excepted Copyright 2014 AVSL Group Ltd 172 801UK User Manual2. high to avoid damage to output unit and unwanted distortion Channel 1 level control a rotary control to adjust the level of channel 1 input Ensure switch is pointed at MIN when set up and gradually increase to desired level Channel 2 3 level control a rotary control to adjust the level of channel 2 3 input Ensure switch is pointed at MIN when set up and gradually increase to desired level Channel 1 EQ with two sliders for High and Low frequency level control also a separate slider for left right pan control Channel 2 3 EQ with two sliders for High and Low frequency level control also a separate slider for left right balance control Connecting up To power up the unit a USB A to USB B lead will be required Plug USB B to the back of the unit and USB A to laptop PC Mac or any other USB power supply When connecting to laptop PC or Mac Q MIX3 should be auto recognised as external USB sound device that allow sound to play into the mixer through USB If no response please check USB diver is up to date and USB sound device is enabled on your operating system 172 801UK User Manual ion Citronic To use Q MIX3 as an output to computer via USB digital audio recording software that can accept a digital audio input from USB will be needed To connect any active monitors or amplifiers to the mixer always ensure the monitors or amps are turned FULLY down before making connection or disconnection This is to avoid possible di
3. it Citronic Q MIX3 Item ref 172 801UK 2 Channel Compact Mixer User Manual This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life The goods must be disposed of according to your local council guidelines cltromicavsl con n ere ibh Citronic Thank you for choosing this Citronic Q MIX3 mini mixer It is designed for multi purpose mixing such as home studio and podcast with USB interface allowing digital recording and play back from a computer Q MIX3 is a small powerful unit which is capable of mixing up to 6 inputs at the same time Powered via USB or from the built in rechargeable battery this compact mixer is ideal for users that are always on the move Q MIX3 also features 18Vdc phantom power supply to the XLR input Together with its internal battery this makes Q MiIX3 an ultimate portable power supplier for most condenser microphones Caution 13 14 18 15 To avoid damage to the unit do not expose unit to rain or moisture In the event of a spillage stop use immediately and allow it to dry out Get the unit checked by qualified personnel before carrying on use Avoid impact extreme pressure or heavy vibration to the unit There are no user serviceable parts inside the mixer refer all servicing to qualified personnel Keep out of direct sunlight and away from heat Keep away from damp and dus
4. ost master fader main mix output on L R RCA connectors 2TK input assign button allows the 2TK in signal to be mixed to monitor output and main output Main output clip indicators 2 green LEDs indicate the presence of a signal on left and right channels of the main output When the output signal reaches the maximum output level of the mixer the LEDs will light red to indicate clipping level To avoid damage to any connected equipment please reduce the channel and master level controls to keep clipping to a minimum USB input output switch USB operates as an output normally press down to switch USB to an input and assign the signal to channel 2 3 USB operation requires compatible computer hardware and minimum operating system of Windows 2000 XP Vista 7 or Mac OS X Master level control a rotary control to adjust the level of main output Ensure the switch is pointed at MIN when set up and gradually increase to the desired level Monitor level control a rotary control to control the level of monitor output Ensure the switch is point at MIN when set up and gradually increase to desired level to avoid damage to monitor unit Channel 1 pre amp level control for high impedance input increase the pre amp gain to appropriate level to provide a good signal to noise ratio Channel 1 signal peak indicator red LED lights when the signal hits maximum level lower channel 1 level control and check channel 1 pre amp gain level is not set too
5. stortion and damage to the output devices Maintenance Use a soft cloth with a neutral detergent to clean the casing as required Use a soft brush to clear debris from the control surface Do not use strong solvents for cleaning the unit Specifications Power USB2 0 5Vdc 500mA Impedance Mic in 1 2kQ Battery Li Ion 3 7V 800mA Line in 33kQ Battery op time 4 hours 2TK in 22kQ Phantom power supply 18Vdc Main out 6800 Gain OdB 50dB Monitor out 1000 Frequency response 15Hz 20kHz 2TK out 1kQ THD 0 05 4dBu 1kHz Dimensions 136 x 98 x 34mm Signal to noise ratio 89dB Weight 480g Troubleshooting Ensure unit is connected to an active USB port or power supply No Power and power switch is on Check signal source is playing and volume is turned up Check condition of the input and output lead to ensure both leads and connectors are No signal from in working condition channel inputs Check channel level and master level control are turned up Check output device power is on and volume is turned up Ensure USB assign button is correctly selected from USB Check mixer is recognized by the computer Check volume control in computer software is turned up Check phantom power is switched on for condenser mic input Check input level is not set too high low Output is very loud distorted Check channel 1 pre amp gain level is correctly adjusted or very low Check channel level and master level control is not set too high low Che
6. ty environments Power charge indicator Power switch Main output Monitor output Channel 1 input Channel 2 3 input 2TK input 2TK output 2TK input assign Main output clip indicator USB input output switch Main output level control Monitor output level control Channel 1 pre amp gain Channel 1 peak indicator Channel 1 level control Channel 2 3 level control Channel 1 EQ Channel 2 3 EQ Q MIX3 ei citronic USB POWER 1 OFF Wren RECHARGE PHONES ON MONITOR ee SS a a ASSIGN ASSIGN TOMAIN TO MONITOR e e e NHO 10 a Ww 11 e NDN 12 2 MIN MAX MIC LEVEL USB LINE LEVEL CH1 fe PIE MIN MASTER MAX 16 17 19 172 801UK User Manual ae a gt 10 11 12 13 14 15 16 17 18 19 ibh citronic LED indicator to show red when charging and green when switched on Both lit when used while charging Power switch to turn power on and off Main output by 3 5mm stereo jack to recorder PC amplifier etc Monitor output by 3 5mm stereo jack suitable for headphone or desktop monitor Input for channel 1 XLR 6 3mm jack combo connector for balanced mono input 18Vdc phantom power is constantly present on the XLR input Input for channel 2 3 2 x AUX input can be used for stereo left right input or 2 x mono input 2TK Input 2 x AUX input can be used for stereo left right input or 2 x mono to input signal to the mixer 2TK output a p
Download Pdf Manuals
Related Search