High Definition VideoScope
Contents
1. x 2 HDV600 EU EN V2 0 5 11 Description Monitor NO Ot BQ Nis co 10 11 12 13 14 Probe connector Camera button Video button Rotate image button Display Zoom buttons Light intensity buttons Power Button Scroll buttons Selection buttons USB connector Microphone SD card slot Video output jack 15 16 Reset button AC adaptor connector Articulating Probe q1 me OF oe oN Articulation knob Articulation tension knob Articulating camera Light intensity buttons Power button AC Adaptor and extension cable sockets Carrying strap Wireless Transmitter 1 oP OS Probe Connector Light Intensity buttons Power button AC Adaptor and extension cable sockets Carrying strap Probe accessories 1 Anti snag tip Magnet 45 Mirror Camera Shaft Monitor connector TA 11 12 13 14 1516 HDV600 EU EN V2 0 5 11 Setup Connect the AC adaptor and charge the monitor for 2 hours before use Insert the SD card into the bottom SD slot Press the Power button to turn the monitor on The battery icon will briefly appear indicating the battery condition Press OK to open the setup MENU Press the A or Y button to scroll through the IA MENU selections AAA DATE TIME SETUP Press OK to open the highlighted selection LANGUAGE Press the A or Y button to scroll through the VIDEO FORMAT items in an open menu item AUTO POWER OFF Press the A or Y buttons t2. Recording a Video REC Press the button to start recording a video The 2g icons will appear on the display when a video is being recorded Press the button to stop the recording Audio will be recorded on the video via the microphone on the bottom of the monitor Note The bottom access cover must be removed for audio recording A The IP67 waterproof rating does not apply when the bottom panel access cover is removed Display Rotation Press the button to rotate the display 90 degrees Installing probe accessories Three accessories mirror anti snag tip and magnet are supplied with each probe Attach the accessory by unscrewing the probe ring and screwing on the attachment P ee ee 5 HDV600 EU EN V2 0 5 11 Articulating probe The articulating probe with adjustable tip angle is used for improved viewing angles and optimum inspection when the probe is inserted into the inspection location The articulating probe is available in a direct wired or A wireless version Wireless version Note The battery must be fully charged for wireless operation A weak battery may result in meter shut down 1 Connect the AC adaptor to the transmitter and charge the battery 2 Press and hold the Power button for 4 seconds to turn the monitor on then select WIRELESS under the INPUT SOURCE selection in the MENU screen 3 Press and hold the Power button
3. All rights reserved including the right of reproduction in whole or in part in any form www extech com HDV600 EU EN V2 0 5 11
4. for 4 seconds to turn the transmitter on The camera video will be transmitted j y to the monitor display y me Insert the probe into the area to be inspected 5 Turn the probe outer knob to adjust the camera tip to the viewing angle needed 6 Turn the upper knob to increase or decrease the outer knob tension Direct version 1 Connect the probe to the monitor using the supplied patch cable 2 Press and hold the Power buttons for 4 seconds to turn the probe and the monitor on 3 Insert the probe into the area to be inspected 4 Turn the probe outer knob to adjust the camera tip to the viewing angle needed 5 Turn the upper knob to increase or decrease the outer knob tension 6 In this mode light intensity is controlled by the buttons on the monitor not by the buttons on the transmitter 6 HDV600 EU EN V2 0 5 11 Wireless transmitter The wireless transmitter is intended for use in areas that are difficult to access or in situations when is hard to maneuver the probe with the display attached The probe can also be connected directly to the monitor using the patch cord Note The battery must be fully charged for wireless operation A weak battery may result in meter shut down Wireless Mode 1 Connect the AC adaptor to the transmitter and charge the battery 2 Attach the probe to the transmitter Press and hold the Power button for 4 seconds to turn the monitor on then select WIRE
5. the monitor and insert it into the SD reader in the pc 2 Connect the monitor to the pc with a USB cable Images are saved in JPG format and videos saved in AVI format de 10005cim de msc Deleting stored Images or Videos 1 Press the A button to access the pictures or videos in memory 2 When the file to be deleted appears press the OK button and the DELETE YES NO box will appear 3 Press the A button to highlight YES and then press the OK button to delete the file 4 Press the ESC button to exit at any time without deleteing the file Video Output 1 Turn the monitor on and select PAL or NTSC to match the video monitor to be used under the VIDEO OUTPUT selection in the MENU screen 2 Insert the video cable into the VIDEO OUT socket on the bottom of the monitor Connect the other end of the cable into the VIDEO IN jack of a TV or other monitor 3 The unit will output a high quality video image Reset button If the monitor becomes unresponsive due to an EMI field or other magnetic event use a paper clip or other pointed object to press the RESET button located on the bottom panel Rear stand The rear stand can be set to three positions Lower stored middle position for bench viewing and upper position for hanging FCC Information This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This devi
6. LESS under the INPUT SOURCE selection in the MENU screen 4 Press and hold the Power button for 4 seconds to turn the transmitter on The camera video will be transmitter to the monitor display Direct Mode 1 Connect the AC adaptor to the transmitter and charge the battery 2 Attach the probe to the transmitter Connect the patch cord between the transmitter and the monitor probe input connector Press and hold the Power button for 4 seconds to turn the transmitter on 5 Press and hold the Power button for 4 seconds to turn the monitor on then select DIRECT under the INPUT SOURCE selection in the MENU screen 6 In the direct mode light intensity is controled by the buttons on the monitor not by the buttons on the transmitter 4 nnn Viewing a Stored Photo or Video in the Display 1 Press the A button to access the pictures or videos in memory Each button press will step through the files with the file number appearing on the screen i e IMG00005 2 Pictures will appear with the photo icon on the display 3 Videos will appear with the film icon on the display 4 To play a video select a video file and press the C button The gt play icon will appear during playback Press the O button again to pause playback The m pause icon will appear 7 HDV600 EU EN V2 0 5 11 Viewing an Image or Video on a PC There are two methods to transfer stored files to a pc 1 Remove the SD card from
7. User Guide EXTECH INSTRUMENTS A FLIR COMPANY High Definition VideoScope Model HDV600 g High Definition MZA 77 HDV600 E A Introduction Congratulations on your purchase of this Extech HDV600 series Video Borescope This instrument is designed for use as a remote inspection device It can be used to peer into tight spots record and playback real time video and images Typical applications include HVAC inspection automotive inspection cable routing and automotive boat aircraft inspection The monitor is designed with dual left or right handed controls for maximum flexibility and is available with a full line of accessories This meter is shipped fully tested and with proper use will provide years of reliable service Models and Descriptions HDV600 HDV610 HDV620 HDV640 HDV640W VideoScope Monitor only VideoScope w 1m flexible cable 5 5mm diameter VideoScope w 1m semi rigid cable 5 8mm diameter VideoScope w 1m Articulating semi rigid cable 6mm diameter VideoScope w 1m Wireless Articulating semi rigid cable 6mm diameter Note Additional probe lengths and configurations are available A list is available at the end of this guide A Cautions A The IP67 waterproof rating does not apply when the bottom panel access cover is removed A For the Articulating Probe do not operate the articulation knob with the probe in a coiled configuration This will damage the articulation controls
8. ce must accept any interference received including interference that may cause undesired operation 8 HDV600 EU EN V2 0 5 11 Specifications Monitor LCD Screen Power Interface Battery Recording medium Compression format Still image format Video Recording Format Video output Format Receiver Frequency Receiver Sensitivity Video System Data Audio type Tripod mount Battery Power adaptor Operating Storage Temperature Operating Humidity Max Dimensions W x D x H Weight Transmitter Frequency Data Video System Battery Power adaptor Unobstructed Effective Range Operating Storage Temperature Dimensions W D H Weight approx 14 2cm 5 6 active matrix 640x480 pixels 5VDC Mini USB 1 1 and AV out 3 7V rechargeable Li Polymer SD Card MPGE4 JPEG 640x480 AVI 640x480 NTSC and PAL 2 4GHz 87dBm SNR 42dB Fmod 15kHz NTSC PAL Video Audio Stereo On rear Accepts standard tripod screw 3 7V rechargeable Li Polymer 100 to 240V input 5VDC output 10 to 60 C 14 to 140 F 40 to 80 C 40 to 176 F 80 24 1 x 17 8 x 7 0cm 9 5 x7 x2 75 1474g 3 25lb 2 4GHz Video Audio NTSC PAL 3 7V rechargeable Li Polymer 100 to 240V input 9VDC output 10m 10 to 60 C 14 to 140 F 40 to 80 C 40 to 176 F 7 5 x 2 75 x 2 5 19 x 7 x 6 35cm 0 95lb 431g 9 HDV600 EU EN V2 0 5 11 Camera Imaging Sensor Total Pixels Video Format Depth of Field Field of Vi
9. ew Number of lamps Brightness Control Lamp Type Lamp Output Lamp Life Interface Housing Waterproof Capacity Operating Temperature Probes and Cameras Articulation CMOS See probe and camera chart NTSC See probe and camera chart 55 4 Manual LED 4200 Lux at 20mm 10000 hours median Composite Video Copper with nickel coating IP57 10 C to 50 C 14 F to 122 F 240 20 manual tip articulation Part Number Description OD Length Camera Focus Distance HDV TX1 Articulating Semi Rigid 6mm 1m 640x480 2 to 6cm HDV WTX1 Wireless Articulating Semi Rigid 6mm 1m 640x480 2 to 6cm HDV TX2 Articulating Semi Rigid Cable 6mm 2m 640x480 2 to 6cm HDV WTX2 Wireless Articulating Semi Rigid 6mm 2m 640x480 2 to 6cm HDV 4CAM 1FM Macro lens Flexible 4mm 1m 320x240 2 to 6cm HDV 5CAM 1FM Macro lens Flexible 5 5mm 1m 640x480 2 to 6cm HDV 5CAM 3F Long depth of field Flexible 5 5mm 3m 640x480 6 cm to eo HDV 5CAM 3FM Macro lens Flexible 5 5mm 3m 640x480 2 to 6cm HDV 5CAM 10F Long depth of field Flexible 5 5mm 10m 640x480 6 cm to o HDV 5CAM 1RM Macro lens Rigid 5 5mm 1m 640x480 2 to 6cm HDV 5CAM 3R Long depth of field Rigid 5 5mm 3m 640x480 6 cm to o HDV 5CAM 3RM Macro lens Rigid 5 5mm 3m 640x480 6 cm to HDV 25CAM 10G Fiberglass 25mm 10m 640x480 6 cm to eo HDV 25CAM 30G Fiberglass 25mm 30m 640x480 6 cm to eo Copyright O 2011 Extech Instruments Corporation a FLIR company
10. o increase or INPUT SOURCE decrease the selected value After there has been a change press the OK button to save the change or the ESC button to exit without the change Note After 10 seconds of inactivity the Setup menu will exit without storing changes MENU Description DELETE ALL Erase all stored pictures and videos DATE TIME SETUP Set the date year month day time hour minute second and display on off LANGUAGE Set the menu display to any one of 21 languages VIDEO FORMAT Set the video output to NTSC or PAL format AUTO POWER OFF Set the APO to 5 10 15 30 minutes or DISABLE INPUT SOURCE Set Direct or Wireless 4 HDV600 EU EN V2 0 5 11 Operation Connect the probe to the monitor Press the Power button to turn the monitor on 3 Maneuvere the probe into position to view the area to be examined The probe can be bent into the shape of the area to be examined Optimum focus distance is 2 to 6cm 0 79 to 2 3 4 Optimum focus distance is probe dependent but the typical range is 2 to 6cm Zoom Press the a or a zoom buttons to increase or decrease the display resolution from 1X to 2X Light Intensity Press and release the a or 3 buttons to increase or decrease the camera LED light intensity Note the camera LEDs become warm when set to maximum intensity Taking a Picture Press the Es button to take and store a picture into memory The icon will appear on the display when a picture is taken
Download Pdf Manuals
Related Search