user manual mikapack... - ADB Lighting Technologies
Contents
1. Enter Enter Enter 3 times enter within 2s will open de preferences Menu The menu allows to setup 1 Custom law 2 If DMX Fails time 3 Display on off 4 Time fade memories User Manual page 17 Issue 1 0 www adblighting com ADB Lighting Technologies MIKAPACK 30 USER MANUAL Preferences are only deleted by resetting to factory defaults Clear ALL option 5 13 1 Custom Law Press Up or Down until C US L A W Press Enter D M X 0 0 L A W 0 0 Press Up or Down to change the DMX VALUE 00 255 Press Enter to confirm Press Up or Down to change LAW VALUE 00 FF Press Enter to confirm Press at any moment Escape to exit the custom law function Factory default LIN law 5 13 2 If DMX Fails time Time if keep is set in the IF DMX FAILS menu Press Up or Down until Press Enter F AD E W A T Press Up or Down to change the fade time 00 99 Press Enter to confirm Press Up or Down to change the wait time 00 99 Press Enter to confirm Press at any moment Escape to go to the main Menu Factory Fade default 60s Factory Wait default 60s 5 13 3 Display on off Press Up or Down until User Manual page 18 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press Enter Press Up or Down to change 1 On 2 Off If off display will turn to black mode after time 30s different time2. PIN 13 19 connected to PE Harting 16 connection NEUTRALS oe 2 ON OO 0 b o Ww esch PHASES CH1 7 CH2 8 CH3 9 CHA 10 CH5 11 CH6 12 RE PE PE PROTECT EARTH User Manual page 24 Issue 1 0 MIKAPACK 30 USER MANUAL CH5 11 ADB Lighting Technologies MAUUNA 1106 Di 043 ADB Your Partner for Light Belgium N V ADB TTV Technologies S A Group Headquarters Leuvensesteenweg 585 B 1930 Zaventem Tel 32 2 709 32 11 Fax 32 2 709 32 80 E Mail adb adblighting com France ADB S A S Sales Office 92 Avenue Jean Jaur s F 92120 Montrouge Tel 33 1 41 17 48 50 Fax 33 1 42 53 54 76 E Mail adb fr adblighting com Factory amp Group Logistics Centre Zone industrielle Rouvroy F 02100 Saint Quentin Tel 33 3 23 06 35 70 Fax 33 3 23 67 66 56 E Mail adb fr adblighting com Hong Kong ADB Lighting Asia Ltd Suite 2414 Level 24 Two Pacific Place 88 Queensway A A Tel 852 903 232 27 E mail adb adblighting com Lighting Technologies www adblighting com M 3043 E 09p Subject to modifications
3. User Manual page 7 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 3 3 5 2x Harting CAUTION OUTPUT 7 12 OUTPUT 1 6 3 4 Power Supply with screw on terminal strip Terminal strip 3 phase N PE EARTH PE NEUTRAL 3 LINE 1 LINE 2 LINE OUTPUTS _ OUTPUTS MAINS IN UserManual page8 www adblightingcom ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 4 RCM Recall Cue Mode Connection on DB9 Cues Memories 1 through 4 may be recalled by dry closing contacts connected to the DB9 connector on the front side of the MIKAPACK30 ATTENTION do not apply any voltage to the DB9 contacts as these may damage the electronic circuits The connection and pin layout to the DB9 connector is as follows Pint Memi Pin2 Mem2 Pin3 Mem Pin4 Mem4 Pin5 Grand Zero all channels are off Pin6 9 GND To activate the RCM mode just connect for a short time the circuit associated to Pin1 through 4 these are corresponding to Mem1 4 to the ground GND pin Now the dimmer enters to RCM mode On the display you can see the activated memory number which now starts to fade in with the selected Fade In time preset in the preference section If you want to activate another memory just close the circuit between Pin1 4 and GND as described above and the actual memory starts to fade out with the selected Fade Out time After fade out the new memory starts to fade in
4. 0 0 1 Press Up or Down to change the dimmer number 1 12 Press Enter to confirm Press Up or Down to change the dimmer number 1 512 Press Enter to confirm Press Up or Down to change the dimmer number Press at any moment Escape the dimmer ask back ENABLE the PATCH function Press Enter to enable press Escape to disable At both selections the edited parameters are stored into the E7PROM Factory default No patch 1 to 1 5 7 Dimmer Law Press Enter press Up or Down until D M L A W Press Enter D M 1 LA W L N Press Up or Down to change the dimmer number 1 12 Press Enter to confirm Press Up or Down to change the law Lin linear rms voltage Lin linear rms to 120 V 120V fluorescent lighting Fluo square law Sqr TV TV BBC BBC non dim on at 15 96 off at 12 OnOf Customer defined law Cust ONDARON Press Enter to confirm Press Up or Down to change the dimmer number Press at any moment Escape to exit the dimmer law function To setup the custom law see preference menu Factory default Lin 5 8 Dimmer Preheat Press Enter press Up or Down until User Manual page 13 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press Enter D M PR EH 0 0 Press Up or Down to change the dimmer number 1 12 Press Enter to confirm Press Up or Down to change lev
5. 5 10 1 e EE 15 5 10 2 OEP M 15 5 10 3 Record DMX NUT D 15 5 10 4 PRIORIN ads onni leden 16 SEM MUSEUM 16 5 11 1 Memo 16 5 12 Factory Default Sins mwn A A Aid 16 5 12 1 Factory Defaulls imita A 17 5 13 Preferences NN 17 5 13 1 Custom LAW ici il medad ated Saa Aknad Dada ic aaa kuda a 18 5 13 2 If DMX Fails UME isis ii ii iia a n adde 18 5 13 3 O 18 5 13 4 Time fade MEMOMES siii ic cau tana sen nao reet dai nda n ana ned bn s 19 User Manual page 1 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 6 Maintenance cia di 20 6 1 Warning E 20 6 2 OE 20 6 3 List of Accessories and Spare Parts 20 6 3 1 Spare Parts Li Mumia ari A AA ida 20 T Wiring Ee Ts EC E 21 7 1 High voltage wiring dagram nennen nennen nnne 21 7 2 Low voltage wiring diagram nnen eee eee 22 8 Data Cal orna 23 8 1 Standard DMX interconnection or extension cabl sese eee eee eee eee 23 8 2 Termination rESISLOT 2 kuta hdas kaia aded ta oor ER nde nae COE TRE kk utaha akadeemiat dd Aaa 23 8 3 DMX Data Connectons ne tragn eoa oaoa aga nass sisi anna a iinan ena 23 8 4 RCM Connectloh eterne dat A 23 User Manual page 2 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 1 Generalities 1 1 Delivery Unpacking Upon delivery of
6. To switch off the existing cue just make a close the circuit between pin5 and GND the actual memory starts to fade out with the selected Fade Out time In case DMX512 signals are present the highest value of incoming DMX signal shall control the signal if the HTP mode is enabled in the MEMORIES menu section By pressing the ESC button on the dimmer when the RCM mode is active the actual cue is immediately disabled and the dimmer goes back to the normal operation mode User Manual page 9 www adblighting com ADB Issue 1 D Lighting Technologies MIKAPACK 30 USER MANUAL 5 Menu Structure 5 1 MENU Structure MIKAPACK dimmer has a rolling menu structure A SS MO ON OD OR MN 3 1 2 Navigation buttons Enter allows to go inside a chosen menu item and the confirm the selections Escape goes always one level to the top menu Up and Down allows to page in the menus and to select the data items in each menu Top Menu items Start Address Test Dimmer e EE Chaser Patch Dimmer Law Dimmer Preheat Page direction for rolling Menu Dimmer Maximum levels Memories If DMX Fails Factory Defaults gt Down Preferences Generalities To enter the Menu press Enter before navigating If a change is done inside the menus an asterix will indicate that you are doing modification s when pressed enter the asterix will disappear and you change s are saved By starting up the MIKAPAC
7. K the software version is shown for a short 5 2 Timeout display DM 3 2 1 KA PA CK X 0 0 7 Description First line ADB MIKAPACK Second line text changing 1s DMX 007 PATCHED if Patched PREH SET LAW SET MAX SET Second line only change if a preheat or and a law is assigned to a dimmer If more than one from above every second the texts are changing User Manual page 10 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 5 2 2 Appears After a start up the MIKAPACK dimmer will display the timeout display Possibility that the display turn to black mode off back light after 30 s see Preference Menu 5 3 Start Address Press Enter press Up or Down until Sj TART A T DM X 0 o 1 Press Enter S T AR T A T DM X 0 0 1 Press Up or Down to change the DMX address 1 512 Press Enter to confirm the new address Press at any moment Escape to undo the change If a patch was programmed previously START ADDRESS Menu will display P A T CHE D ERSA STE 2 Press Enter to erase and entering a global address Press at any moment Escape to undo the change Factory default DMX address 1 5 4 Test Dimmer Press Enter press Up or Down until TEST Press Enter B L I N K ING Press Up or Down to select test mode e Steady dimmer will be steady on in test e Blinking dimmer will blink 1s on 1s off in test Press Ente
8. MIKAPACK 30 User Manual Issue 1 0 T idi VTT mikapack ADB ghting Technologies Ug m y to P ADB Lighting Technologies ME 3043 1106 03 043 MIKAPACK 30 USER MANUAL CONTENT CONTENT viscosa iii 1 1 Generales eR 3 1 1 Deliver Pse T raid eeen bata 3 1 2 ricum EL 3 1 3 DSSCHPUOM EE 4 1 3 1 Weight and dimensions A 4 132 Maim EE 4 1 33 Technical SpecificatiONS coin eter aken taeva atakk Tasas RR RP ds kadaka 4 HA Supplied Witt LED 5 155 SOPUONS trito a esie eee 5 1 4 PrecauONS M ETE 5 2 Pront Pannell PEE A 6 3 Power Supply Connection and Outlet Panels eese enne 7 3 1 Mains Supply EE 7 3 2 Power SUPPIY miii a Da 7 3 3 Outlet Ta HT 7 3 3 1 NF Cebec and Gchuko Rro ener enne Aaaa 7 332 GEE 16 Pei id paa 7 E WEE H 334 MWK TD ER 7 B35 rue 8 3 36 2X SOCADOX rine 8 3 4 Power Supply with screw on terminal stripe 8 RCM Recall Cue Mode Connection on DB9 annen ennn ensen enanenenanenensennsnanenanenensneeennenn 9 Menu Structure n 10 5 1 MENU e 10 SHEER 10 SE CTI NR 10 5 2 B i eg Ee Em 10 32 1 DESCNPUOM mem 10 O22 ce cum 11 5 3 Elle 11 5 4 BIBIT 11 5 5 OEE M 12 5 6 PALGM M egen 12 5 7 Bungb aandeel 13 5 8 Dimmer WV EE 13 5 9 Dimmer Maximum BET 14 5 10 MeITIOIIGS SE Ad 14
9. can be set inside this menu Press Enter to confirm p d S le F TIME 3 0 Press Up or Down to change the wait time 00 99 Press Enter to confirm Press at any moment Escape to go to the main Menu Wait default 30s Display default ON 5 13 4 Time fade memories e For all memories e Also time if used in IF DMX FAILS MENU Press Up or Down until mola F M EM T Press Enter Press Up or Down to change the IN time 00 99 Press Enter to confirm Press Up or Down to change the OUT time 00 99 Press Enter to confirm Press at any moment Escape to go to the main Menu IN default 5s OUT default 5s User Manual page 19 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 6 Maintenance 6 1 Warning Lethal voltages are used in this equipment Refer servicing to trained personnel Power must be disconnected before the cover is removed 6 2 Fuses The internal fuses are accessible by opening the MIKAPACK Always disconnect the power before you open the dimmer unit or replace a fuse Switch power off by means of the supply isolator supply MCB or supply RCD Then disconnect the supply plug Always use fuses of the same type size current rating fusing value and fault current rating as the originals Contact your supplier for spare parts 6 3 List of Accessories and Spare Parts Always use original spare parts do not use substitutes T
10. e user s responsibility to use it for its intended purpose and to check the equipment connected to it The MIKAPACK 30 is professional equipment developed with the simplicity of use in mind However to obtain full benefits of the safety measures the equipment shall be installed and serviced by skilled and trained personnel exclusively Important Notice for Power Cables Power supply cables and connectors are an important part of your equipment and contribute to its safety Always use an isolator or main circuit breaker or RCD use the TEST button or main fuses to interrupt the link never pull on the cable Do not damage the cable nor the connectors in any way check them at each installation or at regular intervals in a permanent installation Do not tie together power supply cables and signal cables User Manual page 3 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 1 3 Description 12 x 3 kW all digital dimmer pack in 19 combining high quality with economic and above average performance for general purpose applications in stage and architectural lighting whenever space cost and reliability are the prime considerations mikapack20 1 3 1 Weight and dimensions Dimensions mm 440 x 355 x 132 Net Weight kg 15 Packing mm 620 x 620 x 230 Gross Weight kg 16 1 3 2 Main Features e 4 control buttons 2 x 8 character LCD display and user friendly menu for easy access to al
11. ed with a forced ventilation system with a low noise high performance fan This allows continuous use at full rated load For MIKAPACK air intake apertures are on the right side panel and the exhaust aperture is on the left side panel Do never obstruct these apertures Keep side apertures clear for ventilation Keep minimum 5 cm open space for ventilation al d d 12 mi 2 A sl e 3 8 ka uua gks uan ADB mikapack3o User Manual page 5 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 2 Front Pannel mikapack 0 e 3 red LED indicators for the supply phases L1 L2 L3 e 2green LED indicators for control signals Run and DMX e 12green LED indicators for the dimmer channels e 4 control buttons e 2x 8 character LCD display e DMX IN XLR 5 F and DMX OUT XRL 5 M connector e DB9 connector for Cue Recall User Manual page 6 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 3 Power Supply Connection and Outlet Panels 3 1 Mains Supply Mains supply 3NPE TN S 400 V 50 60 Hz Single phase operation possible single pole protected 3 2 Power Supply Power supply cable 1 5 m 5 x 10 mm except for the MIKAPACK with screw on terminal strip 3 3 Outlet Panels 3 3 4 NF Cebec and Schuko MADE IN EU 3 3 3 Swiss Picture not available during writing manual 3 34 UK15A Picture not available during writing manual
12. el value 00 FF Press Enter to confirm Press Up or Down to change the dimmer number Press at any moment Escape to exit the dimmer preheat function Factory default 00 for all channels 5 9 Dimmer Maximum Levels Press Enter press Up or Down until Press Enter DI M 1 M A X FF Press Up or Down to change the dimmer number 1 12 Press Enter to confirm Press Up or Down to change level value 00 FF Output input x level eg Input 240 V level 90 Maximum output 216 V Press Enter to confirm Press Up or Down to change the dimmer number Press at any moment Escape to exit the dimmer maximum levels function Factory default FF 5 10Memories The MIKAPACK has 16 Memories with fade in and fade out time Press Enter press Up or Down until Press Enter PLA Y User Manual page 14 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press Up or Down to change 1 PLAY allows to play memory 2 EDIT allows to create a memory 3 RECORD allows to record the input for the 12 channels 4 PRIORIRY HTP memory and DMX input No DMX Play memory disconnect DMX input 5 10 1 PLAY Press Enter PLA Y 0 1 Press Up or Down to select the memory Press Enter to start playing the memory fade in xx s On the display FADE IN appears to inform that the dimmer just fade to the selected memory Escape will
13. he original components were selected to achieve the performance and reliability you expect of your equipment 6 3 1 Spare Parts List Code Description 5021 05 010 Thyristor board 5021 05 020 Control board 5021 05 030 Interface board 5021 04 040 DMX connector board 5021 04 050 ATMEL driver board 5021 04 060 IC main software 5021 04 070 DC DC converter 5021 04 080 Line driver 5021 04 090 Optocopler 5021 04 100 CEBEC socket 5021 04 110 SCHUKO socket 5021 04 120 SWISS socket 5021 04 130 UK socket 5021 04 140 CEE socket 5021 04 150 Circuit breaker 5021 05 160 Front handle 5021 05 170 Front plate User Manual page 20 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL 7 Wiring digarams 7 1 High voltage wiring diagram 3 x 400 230v TN S 50Hz 60Hz In 53A L3 L1 T T e Y 1 C13A L C134 C134 E A e KA Me On Ka My De i era i H 1P N S O 9 Q9 T El ef el E i E E x I Q i Q Q l ol N i i i PE j i Product i E En ADB TTV ADB Mikapack 30 2010 12 02 i ame Total pages 1 High Voltage Wiring Diagram casas Sheet 1 User Manual page 21 www adblighting com ADB Issu e 1 x 0 Lighting Technologies MIKAPACK 30 USER MANUAL 7 2 Low voltage wiring diagram L
14. ighting Technologies RES ULA 9 qeo JE DT mdul WON LL e od p SS PEE 7 ndul 4TX 0 ULA Te 1 497 EE vr er er Zr 8 8 9LA peog 013409 UIEN o9 e qeo pjeius wd sr sr 6f E PM e qeo e E ajod OL ajod O 3 e qeo jeu ejod o et er er LOLA VELA LOLA SA 3 E 3 S SA 606001 OLA ozo ozv eo E S juowwog uBis aeg Ady 2 za v M 2 e a L Cen Y eM S 0 MOVdVMIW Sav ses d 58 KES Ro P Sy en a ee E 4 e e S weaBbeip Bum sjeuBis oDeyjoA MOT o o o 52 S MIKAPACK 30 USER MANUAL 8 Data Cable 8 1 Standard DMX interconnection or extension cable XLRS MX XLRS FX Cable Length maximum 250 m Size 2 x 2 x 0 34 mm 0 34 mm shielded Standard DMX interconnection or extension cable 8 2 Termination resistor The terminating resistor must be placed on the output connector of the last unit on the DMX line 120 A 0 33 W LAS 8 3 DMX Data Connections Pin Signal Pin Signal Ka 4 GND 1 GND 2 DMX data 2 DMX data 3 DMX data 3 DMX data 4 Spare remote programming 4 Spare remote programming e 5 Spare remote programming ER 5 Spare remote programming XLR5 F XLR5 M 8 4 RCM Connection Pint Mem1 Pin2 Mem Pin3 Mem3 Pind Mem4 Pin5 GrandZero all channels are off Pin6 9 GND User Manual page 23 www adblighting com ADB Issue 1 0 Lighting Technologies Socapex 19 connection CH1 7 CH2 8 CH3 9 CH6 12 CH4 10
15. l dimmer functions e DB9 connector for Cue Recall e First dimmer address selection e Local test of a dimmer steady or chaser e 6 pre programmed chasers with 6 intensity levels e Patch selectable per dimmer e 9 dimmer laws selectable per dimmer 1 user programmable law e Preheat selectable per dimmer e Dimmer maximum levels selectable per dimmer e Storage of 16 lighting cues e Last lighting maintained in case of DMX signal interruption or loss cue last DMX values or fading out e Return to factory defaults values e User customization of menu items 1 3 3 Technical Specifications e Power supply 230 V 400 V Star 3NPE 50 60 Hz e Consumption 53 A per phase e Power supply cable 1 5 m 5 x 10 mm except for the MIKAPACK with screw on terminal strip e Dimmer protection with MCB s 1P N e Suitable for continuous duty at 12 x 3kW 35 C e TRIACS BTA41 600 40 Amps e Professional filtering User Manual page 4 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL e Control protocol DMX512A 1 3 4 Supplied with e instruction manual e 2 brackets for 19 rack mounting e 4 rubber feeds to fix on the MIKAPACK possible to fix at bottom side or right side e Additional plate to fix both rear sides of the MIKAPACK for rack mounting 1 3 5 Options 1 3 5 1 Carrying handle Carry handle to make the MIKAPACK easy portable 1 4 Precautions Your dimmer is equipp
16. r D M VAL 70 Dimmer is at stage at chosen value Press Up or Down to change the dimmer number 1 12 User Manual page 11 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press Enter to confirm Press Up or Down to change value 1 FF default value 70 Press Enter to confirm Up next dimmer on stage same value Down previous dimmer on stage same value Press at any moment Escape to exit the test function Re entering Menu values always at default value 70 Note test function includes the dimmer assignments dimmer laws dimmer preheats and the dimmer maximum level 5 5 Chaser Press Enter press Up or Down until C HA SER Press Enter S C ANNER Press Up or Down to select chaser e Fixed 30 e Fixed 50 e Fixed FF e Scanner 1 e Scanner 2 e Scanner X e Build up 1 e Build up 2 e KnightRider Pressing the ENTER the selected chaser starts to play CH A S E R VAL 7 0 Press Up or Down to change level value 1 FF default value 70 Press Enter to go back one level up to select different chaser Chaser will always disable the incoming DMX Press at any moment Escape to exit the chaser function 5 6 Patch Press Enter press Up or Down until P A T C H User Manual page 12 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press Enter D I M 1 D M X
17. stop the playing or fading memory and fade back to DMX in xx s till the dimmer fade back to zero level FADE OUT appears on the display Time to fade in out memories which marked now xx s see the preferences menu 5 10 2 Edit If memory exits no warning to overwrite Press Enter IS ONA ou Press Up or Down to select the memory Press Enter to edit the memory 1 VAL 0 0 Press Up or Down to change the dimmer number 1 6 Press Enter to confirm Press Up or Down to change level value 00 FF Press Enter to confirm Press Up or Down to change the dimmer number Press at any moment Escape to go to edit function 5 10 3 Record DMX Input If memory exits no warning to overwrite Press Enter RE C 0 1 Press Up or Down to select the memory Press Enter to record the memory On the display appears done text User Manual page 15 www adblighting com ADB Issue 1 0 Lighting Technologies MIKAPACK 30 USER MANUAL Press at any moment Escape to go to the record DMX input function 5 10 4 PRIORITY For all memories Press Enter PRI ORI T Y H T P Press Up or Down to change 1 2 NODMX Press Enter to confirm selection Press at any moment Escape to go to priority function 5 111f DMX Fails Press Enter press Up or Down until I F D M X FAILS Press Enter Press Up or Down to change 1 KEEP last DMX values 2 FADE OUT Wai
18. t 60s and fade out in 60s possibility to change in preferences menu 3 MEMORY Play memory Press Enter to confirm selection Press at any moment Escape to go to if dmx fails function 5 11 1 Memory Memory will open submenu Press Up or Down to select the memory Press Enter to select the memory Press at any moment Escape to go to the memory function Default value KEEP 5 12Factory Defaults Press Enter press Up or Down until User Manual page 16 www adblighting com ADB Issue 1 0 Lighting Technologies Press Enter CLEAR MIKAPACK 30 USER MANUAL Press Up or Down to change the dimmer number CLEAR 1 CLEAR Factory default without deleting preferences and Memories 2 CLEAR MEM Deleting All Memories 3 CLEAR ALL Factory default with deleting preferences and Memories Press ENTER C L E A R CO NF I RM Press ENTER to confirm Clear operation Press at any moment Escape to go to the clear function 5 12 1 Factory Defaults Global Address 1 Test Dimmer Value 7096 Chaser Value 70 Patch 1 to 1 Dimmer Law LIN custom LIN Dimmer Preheat No Preheat 0095 Dimmer Maximum levels FF IF DMX FAILS KEEP FADE wait 60s fade 60s Memories Fade out 5s Fade in 5s No HTP Display Timeout 30s ON Custom LAW LIN 5 13Preferences Press Enter press Up or Down until Phil lp ls int la e Press
19. your equipment open the packaging carefully and examine the dimmer unit If you observe any damage contact the shipping company immediately and have your complaint duly recorded You may rest assured that your equipment left the factory in perfect condition Check whether what you have received is in conformity with the delivery notice and whether the notice is in conformity with your order In the event of any error contact your shipper immediately to clarify the situation and receive full satisfaction If you find nothing wrong replace the material in the packing and store it in a warm place away from dust and humidity while awaiting final installation Never leave the material on the worksite under any circumstance 1 2 Safety The MIKAPACK 30 is professional fully digital dimmers built in accordance with European safety standards EN 60950 and EN 60204 It is a Class equipment designed and manufactured to EN 60950 and requires imperatively a safety earth connection in compliance with local regulations To prevent any risk of electric shock do not remove any cover or part of the enclosure Access to internal parts is not required for normal operation Refer servicing to skilled and trained service personnel exclusively Disconnect from the power supply prior to opening for inspection or service WARNING LETHAL VOLTAGES ARE PRESENT INSIDE Connection to an inappropriate power source may irreversibly damage the dimmer unit it is th
Download Pdf Manuals
Related Search