User Manual
Contents
1. Connectors Communication ports 1 x SPHD 18 Female Yellow External mouse 1 x USB Type A Female Black Firmware upgrade port 1x RJ 11 Power 1 x 3 prong AC socket USB 1 1 hub 1 x USB Type A Female USB 1 1 pass through 1 x USB Type B Female Switches Reset 1 x semi recessed pushbutton Power 1 x rocker switch Firmware upgrade 1 x switch LCD adjust 4 x pushbutton LCD on off power 1 x LED pushbutton orange LEDs LCD on off power 1 orange Power 1 blue Num lock 1 Green Caps lock 1 Green Scroll lock 1 Green Emulation Keyboard mouse PS 2 USB Video Maximum Resolution 1280 x 1024 75 Hz DDC2B 1280 x 1024 60 Hz 1024 x 768 75 Hz 1024 x 768 70 Hz 1024 x 768 65 Hz 800 x 600 75 Hz 800 x 600 72 Hz 800 x 600 60 Hz 720 x 400 60 Hz 640 x 480 75 Hz 640 x 480 72 Hz Minimum Resolution 640 x 480 60 Hz UP rating 100 240 VAC 50 60 Hz 1 A Power consumption 29 6W 32 2W Environment Operating temperature 32 F 104 F 0 40 C Storage temperature 4 F 140 F 20 C to 60 C Humidity 0 80 RH Noncondensing Physical Housing Metal and plastic Properties Weight 15 90 kg 17 40 kg Dimensions L x W x H 61 40 x 48 20 x 4 40 cm 66 50 x 48 20 x 4 40 cm Rack LCD Console User Manual 15 Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible A for compliance could void the user s authority to operate this equipment US2. For information on how to obtain local customer support contact the APC representative or other distributors from whom you purchased your APC product 2010 APC by Schneider Electric APC and the APC logo are owned by Schneider Electric Industries S A S American Power Conversion Corporation or their affiliated companies All other trademarks are property of their respective owners 990 3863 001 3 2010
3. Upgrade succeeded After the upgrade has completed an UPGRADE SUCCEEDED screen appears to inform you that the procedure was successful Click Finish to close the firmware upgrade utility Upgrade failed 12 The UPGRADE FAILED screen appears if the upgrade fails to complete successfully Rack LCD Console User Manual Exit firmware upgrade mode 1 Slide the Firmware Upgrade Recovery Switch to the Normal position 2 Remove the Firmware Upgrade cable from the Firmware Upgrade Port of the Rack LCD 3 Console Turn the power to the Rack LCD Console OFF and then turn the power ON Firmware upgrade recovery There are three conditions that call for firmware upgrade recovery Ifthe Rack LCD Console s firmware becomes corrupted and is unable to operate When a firmware upgrade is interrupted When a firmware upgrade fails To perform a firmware upgrade recovery 1 Shut off power to the Rack LCD Console Disconnect the Rack LCD Console from the target device Connect the Firmware Upgrade Cable to the Firmware Upgrade Port and to a COM port of a computer not connected to your installation Slide the Firmware Upgrade Recovery Switch to the Recover position See FW UPGRADE NORMAL RECOVERY on page 5 for the switch location Apply power to the Rack LCD Console and repeat the upgrade procedure See Start the upgrade on page 12 for more information Once the upgrade is successful sh
4. American Power Conversion Corporation However no representation is made or warranty given either express or implied as to the completeness or accuracy of the information this Publication contains IN NO EVENT SHALL AMERICAN POWER CONVERSION CORPORATION OR ANY PAR ENT AFFILIATE OR SUBSIDIARY COMPANY OF AMERICAN POWER CONVERSION CORPORATION OR THEIR RESPECTIVE OFFICERS DIRECTORS OR EMPLOYEES BE LIABLE FOR ANY DIRECT INDIRECT CONSEQUENTIAL PUNITIVE SPECIAL OR INCIDENTAL DAMAGES INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS CONTRACT REVENUE DATA INFORMATION OR BUSINESS INTER RUPTION RESULTING FROM ARISING OUT OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THIS PUBLICATION OR THE CONTENT EVEN IF AMERICAN POWER CONVERSION CORPORATION HAS BEEN EXPRESSLY ADVISED OF THE POS SIBILITY OF SUCH DAMAGES AMERICAN POWER CONVERSION CORPORATION RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES WITH RESPECT TO OR IN THE CONTENT OF THE PUBLICATION OR THE FORMAT THEREOF AT ANY TIME WITHOUT NOTICE Copyright intellectual and all other proprietary rights in the content including but not limited to soft ware audio video text and photographs rests with American Power Conversion Corporation or its licensors All rights in the content not expressly granted herein are reserved No rights of any kind are licensed or assigned or shall otherwise pass to persons accessing this information This Publication shall not be for resale
5. in whole or in part Contents General Information c c ccececcccccececcscsceccncsceaencseeaeaee 1 OVGIVIEW tee ee 1 Symbols used in this manual s e x x e x K 1 Safely s eh ee eres b nei eee ees ee eee eee ss 2 Taking Delivery ran ee 3 Inventory 2 3 LA aie a A an ee 3 Components ar 2 2 iii ie ee 4 Front VieW t ala ee 4 Rear View 2 2H2ee euren nn 6 Installation scene Brackets ss sud ee bees ee ra kaga d 7 Rack LCD Console Installation 0 000 eee eee eens 9 Cable installation aaasiuanannananannnnnnananna 9 Power On the Rack LCD console a 9 B si Functions v Dn ss suas eee eh r ae 10 Opening the Rack LCD console 22ssssssraara a 10 Closing the Rack LCD console 22222sssssanara n 10 Powering off and restarting xes xe e x x e x x n 10 standby mode isise 013 m s l e eRe ee a ee ales 10 Seas te TT 21 24 sdn l ad ee aa Maa aa Gidea De het 10 LCD OSD On Screen Display configuration 10 Monitor settings 2sssnvssnsssanakaaaanaranna aaa 11 USB Peripheral Devices sssnsnsnsssnnan aan anna 11 Firmware Upgrade Mode 22sssssssana aranan 12 Start the Upgrade ie ee acess 2 2 24H 22 sa 12 Upgrade succeeded 2002 200 een eee eee eee 12 Upgrade failed sx lm suasana TRN ee 12 Exit firmware upgrade mode 2ss2sssrsara aaa 13 Firmware upgrade recovery x e e
6. A FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with this user manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference The user will bear sole responsibility for correcting such interference Canada ICES This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme a la norme NMB 003 du Canada APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways e Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests www apc com Corporate Headquarters Connect to localized APC Web sites for specific countries each of which provides customer support information www apc com support Global support searching APC Knowledge Base and using e support Contact the APC Customer Support Center by telephone or e mail Local country specific centers go to www apc com support contact for contact information
7. Arc by Schneider Electric User Manual Sn R I Rack LCD Console AP5717 AP5717F AP5717G AP5717J AP5717R AP5717UK AP5719 F Ana v k A R This manual is available in English on the enclosed CD Dieses Handbuch ist in Deutsch auf der beiliegenden CD ROM verfigbar Este manual esta disponible en espa ol en el CD ROM adjunto Ce manuel est disponible en frangais sur le CD ROM ci inclus Questo manuale disponibile in italiano nel CD ROM allegato KRY a VO BAREIS AD CD ROM 735 C CAN ET DaHHoe PYKOBOACTBO Ha PYCCKOM A3bIKe UMEETCH Ha NPUNaraeMOoM KOMNMAKT ANCKE 195 H DL HY CD FR TTA CHAS s5E CD AM Sa WFO USLC American Power Conversion Legal Disclaimer The information presented in this manual is not warranted by the American Power Conversion Corpora tion to be authoritative error free or complete This publication is not meant to be a substitute for a detailed operational and site specific development plan Therefore American Power Conversion Corpo ration assumes no liability for damages violations of codes improper installation system failures or any other problems that could arise based on the use of this Publication The information contained in this Publication is provided as is and has been prepared solely for the pur pose of evaluating data center design and construction This Publication has been compiled in good faith by
8. LED indicates the scroll lock function on the keyboard is enabled When illuminated the CAPS LOCK LED indicates the capitals lock function on the keyboard is enabled When illuminated the NUM LOCK LED indicates the number lock function on the keyboard is enabled Located on the front of the Rack LCD Console the USB port is used to connect a peripheral device flash drive CD ROM drive or mouse and pass through the Rack LCD Console to the connected target device a KVM switch or server Rack LCD Console User Manual Rear View Item Number Component o Power Socket 2 Power Switch Custom Communication Port USB Port aem0351a Description Standard 3 prong AC power socket Standard ON OFF rocker switch Port for connecting the Rack LCD Console to the target device KVM switch or server using one ofthe included custom communication cables PS2 or USB USB pass through from the USB Port on the front ofthe Rack LCD Console Rack LCD Console User Manual Installation Brackets Caution Use only the hardware provided to install the Rack LCD Console in the rack 1 Attach the left and right mounting rails to the inside of the rack The flange that supports the Rack LCD Console station will be to the inside a Screw the front flanges to the rack first 2 Slide the bars with the rear flanges toward the rack until the flanges make contact with the rack then screw the rear f
9. Plug the power cord into the power socket on the Rack LCD Console and into an AC power outlet 2 Turn the Rack LCD Console on See Power Switch on page 6 for the location of the On Off toggle switch at the back ofthe Rack LCD Console Rack LCD Console User Manual Operation Basic Functions Opening the Rack LCD Console To access the console slide the Rack LCD Console out of the rack and raise the cover Slide Rail Caution Do not lean your body weight on the Rack LCD Console Do not place heavy objects on the Rack LCD Console Do not use the Rack LCD Console as a shelf Closing the Rack LCD Console Close the cover and slide the Rack LCD Console into the rack Powering off and restarting Turn off the power to the Rack LCD using the rear panel power switch See Power Switch on page 6 for the location of the On Off switch To restart the Rack LCD turn the rear panel power switch back on Standby mode The Rack LCD will go into Standby mode to save energy when the cover is closed The display will turn OFF when the cover reaches approximately 15 degrees from completely closed Power will remain ON but the monitor display will be OFF Hot plugging Components can be removed and added to the Rack LCD Console by unplugging their cables from the ports without the need to shut down the console LCD OSD On Screen Display configuration Button Function MENU 1 Starting Pressing the MENU button initiates the LCD OSD and br
10. e x e e e aaa a 13 Rack LCD Console User Manual Troubleshooting an nn ein SDECITICATIONS een ii Rack LCD Console User Manual General Information Overview The Rack LCD Console features an 17 or a 19 LCD panel a full keyboard and a touch pad in a rack mountable sliding housing The Rack LCD Console is intended for use with compatible target devices a KVM switch or server Symbols used in this manual Note the definitions for the icons here and be observant for them throughout this manual They are intended to call attention to potential hazards and important information Electrical Hazard Indicates an electrical hazard which if not avoided could result in injury or death Warning Indicates a hazard which if not avoided could result in personal injury or death Caution Indicates a potential hazard which if not avoided could result in damage to the equipment or other property Note Indicates important information Indicates that more information is available on the same subject either elsewhere in this document or in another named document Rack LCD Console User Manual Safety Read and adhere to the following important safety considerations when working with the Rack LCD Console 2 All work must be performed by American Power Conversion APC authorized Q Note 1 Read all of the instructions Follow all warnings and instructions personnel only device requirements consult
11. es of the OSD 2 While the OSD user interface is in use press the EXIT button to exit the current menu and return to the previous menu or press the EXIT button to leave an adjustment menu when the adjustment is complete 3 From the Main Menu screen pressing the EXIT button will exit the OSD Pressing this button moves left or down through the menu and decreases the value when making an adjustment Pressing this button moves right or up through the menu and increases the value when making an adjustment 1 If the OSD user interface has not been opened pressing the MENU button initiates it and brings up the Main menu 2 While the OSD user interface is in use when a setting choice is reached pressing the MENU button brings up the setting s adjustment screen Turns on power to the LCD monitor An LED light next to the switch will illuminate when the monitor is in stand by power saver mode An RJ 11 port to be used to transfer firmware upgrades from the administrator s server to the Rack LCD Console The Firmware Upgrade switch should be in the NORMAL position during normal operation of the Rack LCD Console The switch is set to RECOVERY only when a Firmware Upgrade Recovery is performed See Firmware upgrade recovery on page 13 for more information The LCD display monitor of the Rack LCD Console Press this recessed switch in with a small object a pen point to perform a system reset When illuminated the SCROLL LOCK
12. ings up the Main menu 2 While the OSD user interface is in use when a setting choice is reached pressing the MENU button brings up the setting adjustment window Right Up Arrow Clicking the Right Up Arrow button moves the cursor Right or Up through the menus or increases the Button value when making an adjustment Left Down Clicking the Left Down Arrow button moves the cursor Left or Down through the menus or decreases Arrow Button the value when making an adjustment EXIT 1 If the LCD OSD user interface has not been started pressing the EXIT button initiates an auto adjustment which reconfigures the settings to the display defaults 2 While the LCD OSD is in use pressing the EXIT button will exit the current menu and return to the previous menu To leave an adjustment menu press the EXIT button when the adjustment is complete 3 From the Main Menu screen pressing the EXIT button will exit the LCD OSD 10 Rack LCD Console User Manual Monitor settings Setting Brightness Contrast Phase Clock H Position V Position Color Hue Language OSD Duration Reset Explanation Adjust the brightness level of the screen Adjust level of color difference between foreground and background colors Adjust the phase setting of the screen so that no dark horizontal bands are visible Adjust the clock setting of the screen so that no dark vertical bands are visible Moves the display area left or right Moves the display area up or d
13. langes to the rack 3 Slide the Rack LCD Console onto the support flanges Use the M4 x 6 screws supplied to loosely attach the front ofthe Rack LCD Console to the front ofthe rack a Do not fully tighten the screws at this time Rack LCD Console User Manual 4 Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the Rack LCD Console Use the supplied M4 x 6 screws to attach the bars to the rear of the Rack LCD Console switch Fully tighten these screws 5 Slide the Rack LCD Console open and closed two or three times to be sure it is operating smoothly 6 Ifthe Rack LCD Console is moving properly in the brackets fully tighten the screws inserted in step 3 aem0348a Rack LCD Console User Manual Rack LCD Console Installation Cable installation Connect the target device KVM switch or server to the custom communication port on the back of the Rack LCD Console using one of the two custom communication cables PS2 or USB that are included Plug the keyboard monitor and mouse connectors to the ports on the target device KVM switch or server N Note The maximum distance between the Rack LCD Console and the target device a KVM switch or server is 32 8 feet 10m Power On the Rack LCD Console 1
14. oll Lock LEDs will flash on and off repeatedly Connect the Firmware Upgrade Cable provided to aCOM port on a computer that is not part of your installation and to the Firmware Upgrade Port ofthe Rack LCD Console From your computer go to www apc com and enter the model name of your Rack LCD Console for a list of available firmware upgrade packages Run the download from your computer by double clicking the file icon or by opening a command line and entering the full path and filename The Firmware Upgrade Utility Welcome screen will appear 7 Read and agree to the License Agreement by clicking the I Agree button 8 The Firmware Upgrade Utility main screen will appear The Utility inspects your installation All devices capable of being upgraded by the package are listed in the Device List panel Click Next to perform the upgrade If you checked the Check Firmware Version box in the Firmware Upgrade Utility main screen the Utility will compare the device s firmware level with that of the upgrade files If it finds that the device s version is higher than the upgrade version a dialog box will open to inform you and give you the option of continuing the upgrade or quitting If you did not check the Check Firmware Version box the Utility installs the upgrade files without checking if they are a higher level or not 10 Status messages appear in the Status Message panel and progress toward completion is shown on the Progress bar
15. own Adjusts the color quality of the display The Adjust Color selection has a submenu that allows fine tuning of RGB values Select the language in which the OSD displays menus Adjust the number of seconds before the On Screen Display shuts down due to inactivity Resets all menus except language and submenus to factory default settings N Note See EXIT on page 10 for information on setting the auto adjust feature USB Peripheral Devices The front panel USB port is available to connect a USB peripheral device flash drive CD ROM drive mouse etc to the target device KVM switch or server using the pass through USB port on the back of the Rack LCD Console The front panel USB port will recognize a USB peripheral device when it is inserted If a mouse is subsequently used in that port use the hotkey combination Ctrl Enter to reset the port so it will recognize the mouse Rack LCD Console User Manual 11 Firmware Upgrade Mode Check www apc com regularly to find the latest information and firmware upgrade packages N Note Do not connect the RJ 11 port marked Upgrade to a public telecommunication network Start the upgrade To download the firmware upgrade package 1 2 3 Turn off the power to the Rack LCD Console Slide the Firmware switch to RECOVER Turn on the power to the Rack LCD Console N Note When the Rack LCD Console is in Firmware Upgrade Mode the Num Lock Caps Lock and Scr
16. ut off power to the Rack LCD Console Disconnect the Firmware Recovery Cable from your computer Slide the Firmware Upgrade Recovery Switch to the Normal position See FW UPGRADE NORMAL RECOVERY on page 5 for more information Turn the power On to the Rack LCD Console 7 Reconnect the Rack LCD Console to the target device Rack LCD Console User Manual 13 Troubleshooting Symptom Action There are ghost images on the external monitor The distance between the external console and the Rack LCD is too great The maximum VGA cable distance should not exceed 20m and in some cases may need to be shorter Replace the VGA cable with one of an appropriately short length Some characters entered from the keyboard do not display correctly The keyboard layout setting for the port does not match the keyboard you are using On your switch change the keyboard layout setting for the port to match the layout of the keyboard you are using No power or no response from the target device KVM switch or server Check that all cables are securely attached in their sockets Erratic behavior Update the firmware See Firmware Upgrade Mode on page 12 for more information 14 Rack LCD Console User Manual Specifications Function AP5717 F G J R UK AP5719 Server Connections 1
17. vided to install the Rack LCD Console in the rack Caution 1 Serious damage will result if the device is dropped or falls d G Lh RW V Slide Rail Caution Slide rail mounted equipment is not to be used as a shelf or a work space 2 Rack LCD Console User Manual Taking Delivery Examine the components at the time of delivery to be sure all parts are present and in good working order Anything missing or damaged must be reported immediately to the shipping firm and to APC Inventory Description Quantity Easy installation rack 1 mounting installation kit Mounting screws 4 Custom communication cable 2 sets USB cable length 6 ft 1 PS2 cable length 6 ft 1 C13 C14 power cord NEMA 5 15 power cord Firmware upgrade cable USB cable Rack LCD Console Literature Kit Includes CD contains User Manual Quick Start Guide China ROHS fa r pee a l Rack LCD Console User Manual Components Front View 4 Rack LCD Console User Manual Item Number Component 8 8 EXIT button Left Down Arrows button Right Up Arrows button MENU button LCD POWER button UPGRADE port FW UPGRADE NORMAL RECOVERY LCD monitor RESET switch SCROLL LOCK LED CAPS LOCK LED NUM LOCK LED USB port Description 1 Pressing the EXIT button without opening the On Screen Display OSD initiates an auto adjustment which reconfigures all settings for the monitor to the optimum display valu
18. your power company 2 The device is designed for use with IT power distribution systems with up to 230V phase to phase voltage 3 Do not overload the AC branch circuit that provides power to the rack 4 To prevent damage make sure all devices are properly grounded 5 The device is equipped with a 3 wire grounding type plug Have an electrician update your outlet if the plug does not fit Do not attempt to defeat the grounding plug 6 Do not exceed the total ampere rating of extension cords if used Make sure extension cords or power strips are properly grounded 7 Protect the system from sudden changes in electrical power with a surge suppressor or uninterruptible power supply UPS 7 Electrical Hazard 1 If you are not sure if your power source is compatible with the 2 Avoid injury and equipment damage as a result of rack failure Read and Warning 1 Route the power cord and cables so they cannot be stepped on or tripped over A adhere to the installation and safety instructions that accompany your racks 2 Do not block ventilation openings The Rack LCD Console requires proper air flow for safe operation Do not place the device near or over radiators or heat registers The rack ambient temperature should be not greater than 104 F 40 C Do not use the device near water Do not spill any liquid on the device Do not use liquid or aerosol cleaners Clean the device with a damp cloth Use only the hardware pro
Download Pdf Manuals
Related Search