Manual - Gefen
Contents
1. I GEFEN Digital Audio Extender EXT IGA UD 141 User Manual 9GEFEN 5 en g Digital Audio 3 Extender S SGEFEN Digital Audio Extender R Release A5 Important Safety Instructions 10 11 12 13 14 15 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this unit near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install or place this unit near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the unit Only use attachments accessories specified by the manufacturer To reduce the risk of electric shock and or damage to this unit never handle or touch this unit or power cord if your hands are wet or damp Do not expose this unit t2. when you first open it immediately contact your dealer or Gefen 1 x Digital Audio Extender Sender unit 1 x Digital Audio Extender Receiver unit 1x6 ft optical cable 1 x 5V DC power supply 1 x Quick Start Guide vi Table of Core Getting Started Introduction nee 2 Sender unit mE a sn Receiver unit 4 Installation uses ds issues cese iO Connection Instructions oe tl 6 Sample Wiring DIAM ci 7 2 Appendix POC ii eier 10 viii Digital Audio Extender NS Getting Started Introductioni nr A iene 2 Senden Un O OO 2 eceiver uni percer I E E E 4 Inistallationss ERRE Re Rane ana 6 Conn don Teo TOSTA TA o nre 6 Introduction Sender unit Getting Started GEFEN didds CAT 5 Digital Audio Extender S 5V DC 1dO page 2 Introduction Description 1 SPDIF Connect an RCA type cable from the digital output of the source to this port If a digital audio source is connected to both the SPDIF and OPT ports then this port has priority and will supply the audio to the Receiver unit o 7 L Y o z gt 7 o 2 OPT Connect the included optical audio cable from this TOSLINK port to the digital output of the source If a digital audio source is connected to both the SPDIF and OPT ports then the SPDIF port has priority and will su
3. disclaimed 1 Proof of sale may be required in order to claim warranty Customers outside the US are responsible for shipping charges to and from Gefen Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com Contacting Gefen Technical Technical Support 818 772 9100 800 545 6900 8 00 AM to 5 00 PM Monday Friday Pacific Time Fax 818 772 9120 Email support gefen com Web http www gefen com Mailing Address Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 Product Registration Register your product here http www gefen com kvm Registry Registration jsp Operating Notes Use CAT 5e or better cables to connect the Sender and Receiver units The length of the cable
4. ender nai Appendix PEC da rin Specifications Connectors Controls and Indicators Audio Input 1x S PDIF 1 x TOSLINKO Audio Output c 1x S PDIF 1 x TOSLINKO CAT 5 1 x RJ 45 shielded Power Indicator O 1 x LED red Operational Power Supply 5V DC Power Consumption 5W maximum Physical Dimensions W x H x D 3 8 x 1 2 x 1 4 96mm x 30mm x 35mm Shipping Weight 5 Ibs 2 3 kg page 10 IGEFEN 20600 Nordhoff Sin Chatsworth CA 9131 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com
5. etter cable page 5 Installation Connection Instructions gt Audio 1 Connect an RCA type cable from the digital output of the audio source to the SPDIF port on the Sender unit Getting Started 2 Connect the included optical cable from the optical audio output of the audio source to the OPT port on the Sender unit 3 Connect an RCA type cable from the SPDIF port on the Receiver unit to the AV receiver 4 Connect an optical cable from the OPT port on the Receiver unit to the AV receiver The Digital Audio Extender will accept audio on either the SPDIF or OPT port on the Sender unit and output the audio on both the OPT and SPDIF ports of the Receiver unit Information gt CAIS 5 Connect a CAT 5e or better cable from the CAT 5 port on the Sender unit to the CAT 5 port on the Receiver unit gt Power 6 Connect the included power supply to the 5V DC power receptacle on the Sender unit and connect the power cord to an available electrical outlet Power to the Receiver unit is supplied by the Sender unit over the CAT 5e cable page 6 Installation Sample Wiring Diagram DIGITAL AUDIO TOSLINK CABLE ua DIGITAL AUDIO COAX CABLE CAT 5e or better CABLE Getting Started Up To 330 Fi Digital Audio Extender Receiver Speakers with Coax Input Audio Receiver Digital Audio Extender nder Speakers with TOSLINK Input EXT DIGAUD 141 page 7 Digital Audio Ext
6. o rain or moisture Unplug this unit during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the unit the unit has been exposed to rain or moisture does not operate normally or has been dropped Batteries that may be included with this unit and or accessories should never be exposed to open flame or excessive heat Always dispose of used batteries according to the instructions Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly
7. pply the audio to the Receiver unit 3 5V DC Connect the included 5V DC power supply to this power receptacle 4 CAT 5 Connect a CAT 5e cable or better from this port to the CAT 5 port on the Receiver unit page 3 Introduction 2 Receiver unit gceren i Digital Audio Extender R O O O O page 4 Introduction Description 1 SPDIF Connect an RCA type cable from the digital output of the source to this port This port will output digital audio from either the OPT or SPDIF port on the Sender unit o 7 L Y o z gt 7 o If a digital audio source is connected to both the SPDIF and OPT ports on the Sender unit then the SPDIF audio signal will be heard on the output 2 OPT Connect an optical audio cable from this TOSLINK port to an audio amplifier This port will output digital audio from either the OPT or SPDIF port on the Sender unit If a digital audio source is connected to both the SPDIF and OPT ports on the Sender unit then the SPDIF audio signal will be heard on the output 3 CAT 5 Connect a CAT 5e cable or better from this port to the CAT 5 port on the Receiver unit 4 Power LED This LED indicator will glow solid red when the Receiver unit is powered The Receiver unit is powered only when the Sender unit is powered and connected to the Receiver unit using a CAT 5e or b
8. should not exceed 330 feet 100 meters in length The Digital Audio Extender will accept audio on either the SPDIF or OPT port on the Sender unit and output the audio on both the OPT and SPDIF ports of the Receiver unit However when both digital and optical cables are used to connect the source to the Sender unit the SPDIF port has priority To hear the audio signal on the OPT port on the Receiver unit disconnect the digital coax cable from the SPDIF port on the Sender unit Digital Audio Extender is a trademark of Gefen LLC O 2015 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice O cc X oO O This product uses UL or CE listed power supplies Features and Packing List Features Extends any S PDIF and TOSLINKO digital audio device up to 330 feet 100 meters from the source Supports multichannel digital audio like Dolby Digital and DTS Supplies clear digital audio over long distances as if connected locally Streamlines audio installations by allowing source devices to be located in off site or unseen rack One CAT 5e cable used for extension Audio is transmitted digitally for zero signal loss Packing List The Digital Audio Extender ships with the items listed below If any of these items are not present in the box
Download Pdf Manuals
Related Search