Xerox Integrated Fiery Color Server and Xerox EX Print Server
Contents
1. Fiery Security White Paper version 2 2 This can be made available from your Xerox representative In addition one can review Xerox Products and Anti Virus Software on www xerox com where it states efi tested compatibility and found no adverse effects when run as described Both the Xerox Integrated Fiery Color Server for the Xerox Color 550 560 Printer and the Xerox EX Print Server Powered by Fiery for the Xerox Color 550 560 Printer contain Secure Erase to ensure the safety of the data on the server hard drive e This feature is enabled by default on the Xerox Integrated Fiery Color Server and may impact productivity rates Settings can be modified to reduce this impact e This feature is disabled by default on the Xerox EX Print Server but can be enabled by adjusting your settings Some IT communities may request a Level of Volatility LOV This document is available Ask your sales representative for further details Non standard Paper Size Support The Xerox Color 550 560 Printer supports non standard paper sizes However due to rounding and unit conversions that occur in the client applications print server and printer some mismatch may occur between the paper size entered at the application and the paper size that must be entered at the printer The operator may need to adjust the entered paper dimensions by up to 0 1 in 2 5 mm in order for the printer to detect that the requested paper size has been l2. e Operating system Windows XP Vista and Windows 7 e Protocols TCP IP NetBEUI Recommended memory Operating system dependent e g Windows XP 256 MB minimum to print UNIX e A workstation with standard TCP IP connectivity e TCP IP printing software that conforms to RFC1179 Berkeley Ipd protocol PPDs and Print Drivers PPDs are provided for Windows XP Vista Windows 7 Windows Hardware Quality Laboratories tested WHQL and Apple Macintosh 10 3 or higher It is recommended to use the Macintosh print driver 10 4 The Xerox Fiery Print Servers are not approved for use on a Mac OS lower than 10 The PC drivers are automatically installed when the printers are installed in the respective PC platforms Please refer to the user s manual for further installation information PCL Fiery Drivers are not included Fiery System Software Limitations Client e Cover Page comes over as separate job when sent from a MAC OS X client Command Workstaion e For color engines if using the getTIFF macro commonly used on monochrome devices the recommendation is to use getFORM Using getTIFF macros may impair performance The macro getFORM has a wider PDL format support and caching performance The maximum copy count in the PPD and Command WorkStation job properties is 9999 The maximum number of spot colors per page in a composite overprint file is 250 The maximum is 250 per page with CMYK e When the hard disk of the color s
3. Color Server require an electrical outlet they are not powered by the print engine Product Recycling and Disposal Xerox operates a worldwide equipment take back and reuse recycle program Contact your Xerox sales representative 1 800 ASK XEROX to determine whether this Xerox product is part of the program For more inf ormation about Xerox environmental programs visit www xerox com environment Note This product meets the RoHS standards Restriction of Hazardous Substances required for products being installed in the European Union Space Requirements See chart on page 6 for space requirements that are matched to your Xerox Fiery Print Server Refer to the base system Customer Expectations Setting guidelines for calculation instructions to determine the space that is required around the system in its various configurations To enable a Xerox Service Representative to safely repair the system the work area must measure at least 36 inches 91 44 cm square around the server The work surface of the network controller must not infringe on the space requirements by the print engine and any attached accessories unless the work surface is a table that has wheels and can easily be moved Refer to the print engine s Customer Expectation Document There must be a minimum of 78 inches 198 12 cm clearance from the floor to the nearest overhead obstructions All standard Xerox space requirements apply to this installation including o
4. and Print If you install the Windows Fiery printer driver with Point and Print you may receive an error when you view the printer driver properties Printing a job with incompatible Finishing print options If you try to print a job with incompatible Finishing print options you will receive a message that Finishing could not be completed as selected Correct paper not loaded in the printer If you print a job and the correct paper is not loaded in the printer the load paper message may not specify the paper weight you need to load to complete your job The paper weights are listed in the Customer Release Notes and the paper needed is displayed in the EFI Command Workstation Information panel If you print an APPE job with many spot colors and select Composite Overprint your job may not print correctly Calibrator Starting Calibrator If you start Calibrator from the applications folder while Command WorkStation is running Command WorkStation may stop responding SeeQuence Suite List View not available in SeeQuence Preview The Help for SeeQuence Preview refers to List View an alternative way of viewing pages in the Page View pane as a list in text format List View is no longer available Pages are displayed as thumbnails in the Page View pane Saving APPE jobs in SeeQuence Impose When you have imposed a job in SeeQuence Impose with APPE Adobe PDF Print Engine selected in Fiery Job Properties and saved the job you cannot go b
5. digital printing systems In customer environments where tight color controls are requirements and or passing of the Altona Suite Fogra Media Wedge and Ghent Suite it is highly recommended to have EFI Profiler to help maintain color consistency More information on the Altona Test Suite can be found at http www altonatestsuite de en index php More information on the Ghent Output Suite can be found at http www gwg org Fogra Media Wedge Xerox EX Print Server The Fogra Media Wedge is a color proofing bar used to monitor and measure color It is a comparison tool designed for checking digital proofs against print standards To maintain tight consistency for this industry standard requires EFI Profiler to calibrate and profile engine Profiler is recommended to calibrate and profile both the monitor and press and to inspect and measure the output 10 Item Mixed Media Support Xerox Fiery Print Server Dynamic media pulls Recognizes the PostScript jobs Supports imposed and non imposed command for any stock related parameter to enable mixed stock Comments Tabs are not supported with any imposed job e For imposed jobs sheet size for that job is fixed and cannot be changed Mixed media cannot be applied as a record based attribute inside FreeForm jobs Mixed Media settings for FreeForm jobs must be applied to the variable component
6. file makes shared locations users Fiery security log in protocol accessible only to authorized Tab Wizard Insert Tab Set up tabs sets and controls in Tabs are set up as 9 x11 Wizard an easy to use interface 23cm x 28cm in Tab Can choose forward or reverse Wizard but are set up at the tabs and a set number of banks engine as 8 5 x 11 or A4 of tabs Tabs are defined by the stock library Security User password control e Included in all EFI Print Servers e Microsoft XP Pro operating system and security features are available on Xerox EX Print Server Secure Erase data Department of Defense 5220 22M The ability to rewrite the hard drive data three times to destroy Included in all EFI Print Servers Purchasable Options The following features are available as purchasable options on the Xerox Integrated Fiery Color Server and the Xerox EX Print Server unless otherwise noted Speak to your Xerox Sales representative for more information Item Fiery Integrated Workstation Includes Furniture stand GUI Kit display keyboard and mouse Comments not available with the Xerox Integrated Fiery Color Server EFI Color Profiler Suite v3 0 A complete integrated color management tool to ensure color quality control in the printing workflow The flexible suite is based on EFI s color management solutions Color Profiler Suite consists of th
7. 00 240 V 0 8 A 47 63 Hz 250 W typical 500 W max 858 typical 1716 max 27 58 8 36 22 23 17 59 67 30 3 60 5 154 32 1 81 5 40 101 62 28 1 Running Antivirus Software The Xerox EX Print Server has not provided testing on any specific anti virus software One should refer to the user documentation on how best to choose appropriate antivirus software and what settings should or should not be enabled on the Xerox EX Print Server Commercially available software programs with the exception of Virus Protection Software should not be loaded onto the Xerox EX Print Server Additional programs will limit the available disk space the color server requires to operate efficiently The Xerox Integrated Fiery Color Server is run on a Linux platform access is behind the unit Loading antivirus software is neither recommended nor supported Security Security threats are defined as issues that compromise the integrity of the system hampering the integrity of job data compromising secured feature access or allowing unauthorized data access The recommends installation of network devices be done in accordance with existing security paradigms The Xerox Fiery Print Server core software includes security features To create a more secure network environment end users will need to combine the Xerox Fiery Print Servers security features with other security safeguards Customers should review the ef i
8. Meter Assistant is a feature within certain Xerox engines that uses the Xerox Fiery Print Server to send meter readings over the internet Supplies Assistant is a feature within certain Xerox engines that allows customers to easily replenish and order Xerox supplies Remote Assistant is a feature within certain Xerox engines that allows customers to authorize a Xerox specialist to remotely access the user interface on the digital front end to help guide you through corrective actions Xerox Remote Service Offerings are currently available for the Xerox Color 550 560 Printer Automated Meter Reading and Automated Supplies Replenishment AMR ASR is of fered on the Xerox Color 550 560 Printer Customers who wish to find further information may go to http www xerox com printeract Adobe PDF Print Engine The Xerox EX Print Server now supports APPE v2 0 Adobe PDF Print Engine offering native end to end pdf workflows This technology provides important features Improves the consistency and flexibility of PDF output from design to print Supports live transparency and spot color rendering Adobe Common Rendering Engine ACR Adobe Creative Suite and RIP technologies now use asingle rendering engine The Xerox EX Print Server can process CPSI and APPE workflows simultaneously ensuring all jobs will meet customer demands appearance and perf ormance APPE is not available on the Xerox Integrated Fiery Color Server Fil
9. Xerox 8 Xerox Integrated Fiery Color Server and Xerox EX Print Server Powered by Fiery for the Xerox Color 550 560 Printer Customer Expectations Document 2010 Xerox Corporation All rights reserved Xerox and the sphere of connectivity design and Xerox Color 550 560 Printer VIPP are trademarks of Xerox Corporation in the United States and or other countries Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory judicial law or hereinafter granted including without limitation material generated from the software programs displayed on the screen such as icons screen displays or looks Other company trademarks are also acknowledged Changes are periodically made to this document Changes technical inaccuracies and typographic errors will be corrected in subsequent editions Document Version 1 5 September 9 2010 Table of Contents Introductio EE olevranaesbesntcdubenpbenetbeannedeale 4 System Core SoftWare ssressssssrsssssserrsessssserenssssssseressssserressssssseressssssreeressssserenssssssssresssssers 4 UPP aa A A R A A A A A E 4 Surge Protection ussessevssseersessseressseressssseeesssseesssssrsenssesensssseeessssersssseresesserenssssenssssseesssserenee 4 Environmental and Electrical RequirementsS ssssmsssrensssrresssserrssssrersssssrrssssrersssssrrsssssenn 5 Space Requirements i snessseseessssssereessssgeseepensssespen
10. ack and make further imposition changes to the imposed job The default for saving APPE imposed jobs is as a flattened PDF which does not allow further changes If you are not satisfied with the imposition choices you have made start over with the original job NOTE If you save the job in dbp format you can make further imposition changes but the job will be RIPped as a PostScript job not as an APPE job 16 Responsibility Matrix Action Customer Carrier Xerox Ensure adequate space and power to configure the xX Color Server to the print engine Unpack system components a Install server hardware Connect all System Components prior to powering up x3 the system Install the printer description files utilities and x2 printer drivers on client PCs Ensure network configuration x Confirm network integrity Acquire and install client workstation network 2 X hardware and software Monitor and Adjust calibration for color matching of x color management systems Load any additional fonts X Procure BNC transceiver for network connection if xX required Set up and administer client workstations X Provide Helpline Support when FSMA is purchased i Provide spared parts when FSMA is purchased Provide service when FSMA is purchased 1 Install all software options designated as customer x installable Secure all system software X Assess site security requirements and conf
11. e following 3 modules 1 Profile Creation 2 Profile Evaluation 3 Quality Assurance Generate Monitor amp Printer Profiles Create Device Links Inspect amp Edit profiles EFI Color Verifier ES1000 Spectrophotometer hardware 11 Item Productivity Package Includes Advanced Job Management Control Bar Image Viewer soft proofing and editing capabilities Paper Catalog Paper Simulation editing Post Flight Hot Folders included Virtual Printers Comments This functionality is standard on the Xerox EX Print Server but is optional for the Xerox Integrated Fiery Color Server Hot Folders and Virtual Printers The hot folder relieves the user of the repetitive task of configuring print settings for multiple jobs and allows the direct printing of files without need for an application Supports native printing through hot folders for Microsoft applications Microsoft Word Excel Publisher and PowerPoint This functionality is standard on the Xerox EX Print Server as part of the Productivity Package but is optional for the Xerox Integrated Fiery Color Server Additional dongle for remote client s w functionality EFI SeeQuence Suite Includes two Features SeeQuence Compose Preview and Edit Jobs easily Compose provides a visual representation of the job so users can confirm the correctness of the job before printing or modify it as necessary SeeQuenc
12. e Creation Even with the ability to process files through the Adobe PDF Print Engine there can be variations in processing times and color when comparing this to the traditional CPSI PostScript pathway It is always best to create files appropriate for the intended production workflow Image source color profiles common color conversion working spaces live vs flattened transparency should all be considered prior to creation for best end results Images that are scaled and rotated to their appropriate angle size and resolution prior to being placed in a design program will typically process better Always refer to a design guide for advice Xerox offers two booklets as guidelines to help you and your customers They are The Art amp Science of Digital Printing The Parsons Guide to Getting it Right and The Xerox Job Preparation Guide for Designers These items are part of the Xerox ProfitAccelerator Program Further information can be found at www xerox com under Business Development or from your local sales representative Always read the full documentation and understand how PDFs affect color paths with the print engine Adobe has several booklets available on PDF creation such as How to Create the Perfect PDF and Designer s Guide to Transparency for Print Output These documents are downloadable from Adobe s web site at http www adobe com studio print Supported File Formats The following file formats are supported by both
13. e Impose e A WISIWIG tool to enable easy creation of imposition layouts Create unlimited user definable imposition templates Streamline the imposition process and eliminate repetitive tasks Also handles last minute editing of text and images with powerful PDF editing capabilities SeeQuence Impose is standard for the Xerox EX Print Server and Compose is an option Uses an additional dongle for full s w functionality EFI SeeQuence Compose Preview and Edit Jobs easily Compose provides a visual representation of the job so users can confirm the correctness of the job before printing or modify it as necessary Also handles last minute editing of text and images with powerful PDF editing capabilities SeeQuence Impose is standard for the Xerox EX Print Server and Compose is an option Uses an additional dongle for full s w functionality Graphic Arts Premium Edition Not available for the Xerox Integrated Fiery Color Server Removable Hard Disk Drive Kit Hardware to enable external hard disk drives This kit will provide an external casing that will house all hard disk drives for the DFE This will allow for the HDD s to be removed and locked up if desired Not available with Xerox Integrated Fiery Color Server 12 Variable Information If a customer is successfully running a Xerox FreeFlow Variable Information Suite 8 0 Variable data Intelligent PostScri
14. e Xerox EX Print Server Every Xerox EX Print Server Xerox Fiery Print Server Xerox EX Print Server includes a System Software DVD a User Software DVD and a User Documentation CD It also includes an individual Windows XP for XP Professional Certificate of Authenticity COA license number that is preprinted on a label placed on the back cover of the Xerox EX Print Server It is the responsibility of the customer to place the booklet and all software DVD CDs ina secure but accessible area The System Software DVD and User Software DVD along with the license number might be required when perf orming a complete Xerox EX Print Server software installation The Xerox Service Representative will use the DVDs and the license in case a f ull system software re installation is recommended Xerox EX Print Server may make available system updates to the operating system These are downloadable from the Xerox EX Print Server and are customer installable The Xerox Integrated Fiery Color Server is run on Linux There is no Windows Certificate of Authenticity COA license number Note If the license is lost or misplaced the customer will be required to purchase a replacement license at his or her own expense Environmental and Electrical Requirements See chart on page 6 for electrical requirements that are matched to your Xerox Fiery Print Server Note Both the Xerox EX Print Server Powered by Fiery and the Xerox Integrated Fiery
15. erver is full jobs sent to the server will not print until the current job is finished and completed jobs are removed from the Printer Queue e Jobs archived using any previous version of software may not be backward compatible to other Fiery servers 14 Enfocus pop up window may still appear if all of the required fields are not completed Printing from some applications may require Use PDF X Objects to be disabled the Default is Off to allow for proper printing Duplicate feature inside of Preview may cause unexpected results with Mixed Media If a job is sent with a Custom Paper Profile but that profile is not set up on the IOT the job will need to be cancelled the profile will need to be setup on the IOT and then the job can be re submitted Very rarely the Print Server may lock up when a process and held job is deleted from the Active queue A reboot of XP will get the Print Server back online If any Tab or Insert sheet is inserted into a job using the Compose Utility and that particular Tab Insert is not loaded in the IOT the job will error out and move to the Printed Jobs Queue highlighted in pink If double clicked this job will say no trays are associated with the media inserted through Compose Load this media in the IOT and re submit the job and it will print successfully If a job in the Printed queue is double clicked on the properties window will come up and a Preview button will be located in the bottom left hand s
16. ide of this window This Preview button is here in error and will not function If the job must be previewed move the job to the Active queue and preview it from there and it will function properly Fiery Print Server Software Limitations Start up The Xerox Integrated Fiery Color Server currently can take a longer than expected time to start up after the unit is powered off This is being addressed in the software restarting the server will aggravate the problem so patience is required Setup Error message appears on the printer touch panel when the Fiery icon is pressed If you press the Fiery icon on the printer touch panel and an error message appears enable the following settings in Centreware Internet Services 1 Open a Web browser on a client computer type the Fiery Controller IP address in the address field of the browser and then press Enter On the WebTools page click Xerox WorkCentre 2 In Centreware Internet Services click Login and enter the system administrator user ID and Password Default user ID is admin default password is 1111 Click Login 3 Choose Properties gt General Setup gt Extensible Services Setup Under Browser Settings select Enable the Extensible Services Browser and then click Apply 4 Reboot the Fiery Note This setup procedure should also be followed if the Fiery button is grayed out on the printer interface panel Printing 15 Windows Fiery printer driver installed with Point
17. igure the print server as needed to satisfy customer s X IT Security department Ensure all sensitive customer data is removed from the server and print engine hard drive before return X to Xerox 1 Xerox is responsible when a Field Service Maintenance Agreement FSMA is purchased Xerox does not offer these services without the purchase of a FSMA Contract A customer can purchase professional consulting hours to have a systems analyst assist in planning and implementing these activities 3 The Xerox Color 550 560 Printer is delivered and installed by Carriers The carrier unpacks installs the hardware connects the print server to the engine and prints a job from the sample jobs folder The customer installs all software options 17 Customer Expectations Agreement Check the modules that will be part of this install and for which expectations have been set Xerox Integrated Fiery Color Server for the Xerox amp Color 550 560 Printer Xerox EX Print Server Powered by Fiery for the Xerox Color 550 560 Printer Primary Customer Applications Special considerations or performance limitations identified by Xerox and agreed to by the customer Upending and or Stair Climbing Required and Reviewed Yes Not Required I have reviewed and understand the product specifications for each of the modules that will be installed signatures required Customer Xerox Sales Representative Xero
18. mation about the capabilities and potential limitations of the core software for both the Xerox EX Print Server for the Xerox Color 550 560 Printer and the Xerox EX Print Server Powered by Fiery for the Xerox Color 550 560 Printer when connected to a Xerox Color 550 560 Printer Review of this material is mandatory prior to signing an order The chart on page 6 is a guide of hardware specifications matched to the Xerox Color 550 560 Printer Minor hardware variations within the model may occur as upgrades take place in the manufacturing process Any difference in the delivered product will provide functional equivalence to the performance and feature set described herein Support Software and hardware support of your print server may vary in regions Refer to the Terms and Conditions f or definitions for software and or hardware support Surge Protection Xerox recommends protecting the Xerox Fiery Print Servers from surges or spikes in electrical power that can damage the server and result in extended downtime In areas that tend to experience brownouts or blackouts with more frequency installation of an Uninterruptible Power Supply UPS is suggested This protection is the responsibility of the customer A surge protector is strongly recommended for the network controller installation This should be provided by the customer Microsoft Windows Certificate of Authenticity COA Microsoft XP Professional License is part of th
19. oaded In addition the printer interprets some paper sizes included in the PPD as non standard sizes Customer Service and Support Periodically Xerox will make available bug fixes and other software releases Some of these bug fixes and upgrades are designed to be customer installable DVDs with patches can be obtained by calling the Xerox Hotline Support Centre Future upgrades may have costs associated with them Software Replacement If lost or misplaced replacement software and documentation is available to be purchased For the United States you can access replacements through the Software Services web site http www xdss com If you reside outside the United States work with your local Xerox Representative Xerox personnel may not be able to provide services unless these materials are available Professional Support Services Xerox offers a rich set of value added services designed to help you plan implement and operate your solution in addition to migrate and build your key applications analyze and optimize your workflow Your local sales representative and analyst can discuss and demonstrate to you their professional services can make your business more effective Professional services are billable by the hour and or job based depending on the geographic region Remote Services Xerox printeract services are a suite of remote services available on various print engines to check the engine state and report billing meters
20. ok at separate applications or separate windows Preview print jobs from several different servers at one time Constantly monitor activity on one selected server or on all connected servers Comments Command Workstation is included more current version of CWS may be available to download from Xerox com Can run multiple color or monochrome systems from one central site Client memory may limit the number of remote GUIs 512 Mb minimum of memory required Fiery JDF v1 0 Xerox EX Print Server amp Xerox Integrated Fiery Color Server Enables Fiery integration with JDF workflow Resides on Fiery Server Basic JDF JMF commands are supported These commands are those that reference the stock library weight size and color Booklet Maker 4 0 Xerox EX Print Server amp Xerox Integrated Fiery Color Server Easily create booklets in a user friendly environment without trying to program a job ticket Passes both Altona Suite Xerox EX Print Server amp Xerox Integrated Fiery Color Server Ghent Output Suite Xerox EX Print Server These are two different tests to help a printer comprehend how the Print Server manages color PostScript Overprint and other common color print issues The tests suites test and verify both PDFX 1A and PDFX 3 capabilities The files are specially designed for testing digital output devices primarily proofing systems as well as conventional and
21. ports the following printing services e LPD Line Printer Daemon Allows printing in TCP IP networks using an LPR client and supporting RFC 1179 the Berkeley LPR protocol Supports direct socket interface via port 9100 e PAP Printer Access Protocol Allows printing in AppleTalk networks e NetBIOS printing and file sharing over TCP IP e NFS file sharing e SMB Server Message Block Allows printing in Windows networks over TCP IP e Port 9100 Supports direct socket interface through direct print and hold queues Note Disabling the Port 9100 service also disables the associated IP ports e FTP Printing Supports printing from an FTP client to the Fiery e IPP Support Internet Printing Protocol IPP is an application level protocol that can be used for distributed printing using Internet tools and technologies This would allow end user to print to aremote printer on the Internet as if it were attached to its local area network by specif ying the URL IPP uses HTTP protocol to provide the underlying communication between the client and the server Note Disabling the IPP service also blocks port 631 13 Client Specifications Macintosh e G4 Power Macintosh or better is strongly recommended e Operating system OS 10 4 or higher e Protocols AppleTalk TCP IP e Recommended memory A minimum of 512 MB is recommended e Required platform PC platform capable of running supported operating system
22. pt Printware workflow it will work similarly across the Xerox portfolio when using the efi Fiery Color Server The same Xerox infrastructure in place today will support existing applications on the Xerox EX Print Server VIPP is not supported on the Xerox Integrated Fiery Color Server Variable information is a very complex subject Many variables exist that impact a file File creation emitters PostScript code and type of server are just a few of the things that will affect Variable Code It is advisable to test a file prior to gain an understanding of any possible issues in the workflow A Xerox Analyst can help in the process and there is always opportunity for a customer to correct and develop an ef ficient workflow to gain the best throughput Network Specifications for Xerox Integrated Fiery and Xerox EX Print Color Servers The Xerox Fiery Print Servers use the following protocols and frame types e Microsoft Windows WHQL Windows Hardware Quality Labs printer drivers with Dynamic tray and Status reporting e Macintosh OS 10 full feature drivers e Adobe PostScript Printers Descriptions PPD e HTTP and HTTPS browser submission support e FreeFlow Print Manager FFPM is an optional workflow solution support e Microsoft Windows 2003 XP Vista and Windows 7 full featured drivers Note If a DHCP server is not available the Server IP address must be entered manually Printing Services The Xerox EX Print Server sup
23. sssgessspensssespersenassespensssseeseeensnsespensssspesseenansene 5 Specificato NS sie na Sn Ee ne eno 6 Running Antivirus Software eseeressssserervosssssrrensssnssssrnssssserrseessssssressssssssrenssssssressessssssrensene 7 SECUN cade taeced E EAEE EEE 7 Non standard Paper Size Support nsssesssseressseresssssserssssrrsssssrerssserrssssrerrsssserssssessssssersssssenn 7 Customer Service and SUpport isssssrenssssrrssssrenssssrrensssrrnssssrssssssrrssssersssssserssssrensssssesssssseneee 7 Professional Support Services ssressssserrrrsssssserrssssnsssrrrssssserrsesssssssressssssssernssssseresssssssseresener 8 Remote SENER 8 Adobe PDF Print Engine isessssssrrssssrrsssssrrenssssrsssssrrsessssrsssssrrssssssrssssserssssssrsssssrrssssrerssssseensssns 8 LER Ge Lao g EE ENN 8 Supported File Formats nsssessssssserresssssrrsessssssrsssssssssrrsssssserssssnssseresssssserresssssssrrsssssnssseesssssser 9 Purchasable Options ss sssrrssssrrresssserrssssrrssssssrsssssrrssssssrsssssrrnsssssrsssssrrssssrersssssrensssrernssssernsssns 11 Variable Information sss sssssesreesssssressssssserssssssereresssssseressssssserrssssssrssesssssseesssssssseensssssser 13 Network Specifications for Xerox Integrated Fiery and EX Print Servers 13 Printing fo Sa EE 13 Client SPECIFICALIONS icss cssccsossocscesesestesssccsssnsesssvsscceasedececosecbsousecossaatecconsseschoubsscadenssosssteshaseeden 14 PPDs and Print Drivers ssseses
24. ssssseesssssereresssssseresssssnseressssssrrsessssseresssssssreressssseresssssssserssesnr 14 Fiery Print Server Software Limitations s mmesssersssssresssssssrrssssssseressssserenssssssssesnssss 15 Responsibility MatriX ssmsesseressssssserrssssssrrrensssssrressssssssrenssssssrrsessssssresssssssseressssserenssssssseresener 17 Customer Expectations Agreement nssssessersssserressserenssseverssssersssseresssserensseeerssssseesssserer 18 Introduction The purpose of this document is to provide information about the capabilities and potential limitations of both the Xerox Integrated Fiery Color Server for the Xerox Color 550 560 Printer and the Xerox EX Print Server Powered by Fiery for the Xerox Color 550 560 Printer when connected to the Xerox Color 550 560 Printer This document is a supplement to the Customer Expectations Document f or the Xerox Color 550 560 Printer and review of this material is mandatory prior to signing an order Please see the Fiery Customer Release Notes document for the Xerox Color 550 560 Printer for additional information and details concerning Adobe PDF Print Engine and Fiery Server software usage tips System startup When powering up your Xerox Color 550 560 Printer system both print engine and server the print engine must be turned on first This ensures that the print engine and server will synchronize correctly System Core Software The purpose of this document is to provide infor
25. the Integrated and EX Print Servers e PostScript level 1 2 or 3 per the PostScript language Reference Manual Supplement v3019 and PDFLib9 Adobe Portable Document Format version up to 1 8 Acrobat 9 e Supports native PDF processing e TIFF e PCL 6 C can be processed by both EFI servers but can not be selected as an output from the driver e Jobs that have been RIPped EFI FreeForm 1 and FreeForm 2 VDP e Xerox FreeFlow Variable Information Suite VIPP e Personalized Print Markup Language PPML Version 2 1 Graphic Arts subset e Jobs submitted from Xerox FreeFlowTM Workflow Offerings e Desktop Color Separations DCS 2 0 e CT LW e TIFF TIFF IT DCS2 JPEG e Microsoft Native Formats DOC XLS PUB PPT enabled through Fiery Hot Folders feature Key Features and Considerations The following features are available and operate per specification unless otherwise noted in the customer documentation Your operators will be trained in the use of these features Item Xerox Fiery Print Server Comments Calibration Xerox EX Print e ColorCal Standard off the glass Server amp Xerox Integrated calibration with the Fiery Color Server Integrated Controller Item Remote Operation Xerox EX Print Server amp Xerox Integrated Fiery Color Server Xerox Fiery Print Server Command Workstation 5 Log into multiple servers Manipulate jobs from any connected server without having to lo
26. verhead shared aisle or hallway and operator space The customer is responsible to provide appropriate floor spacing and placement surface Storage and future availability of software that ships with the color server is a customer responsibility Xerox personnel do not carry replacement materials Note Power cords for the Xerox EX Print Server Powered by Fiery and the Xerox Integrated Fiery Color Server are approximately 7 5 f eet 2 3 meters Specifications Xerox Fiery Print Server Integrated Fiery Color Server Features Model Software Level DFE Engine EFI 550 560 HARDWARE XYY Intel Pentium Processor E5300 2 6 GHZ Processors Motherboard Platform Tyan P2198 System Memory Minimum Hard Drives Minimum 160GB DVD Drive Serial Interface USB Interfaces Monitor Size Fiery S W System 9 Release 2 Stand Removable Hard drive 110 V 20A Electrical 220 240v 10A Height inches cm Width inches cm n a Depth inches cm Weight Lbs Kgs n a Optional Stand Height inches cm n a Width inches cm Depth inches cm n a Weight Lbs Kgs n a EX Print Server v 1 0 Produce Codes YAA Intel Core 2 Duo E8400 3 GHz Tyan 5217 Windows XP Professional 64 bit 2 GB 160 GB DVD R W No 6 19 Flat Panel with Stand option System 9 Release 2 Optional Frame is an Option additional drives are ordered via the TXC 1
27. x Analyst Representative Xerox Service Representative I have viewed a representative output sample from the Xerox Printer and the image quality is acceptable for the needs of my organization Signature required if a Xerox Color 550 560 Printer is part of the order Customer 18 19 This page intentionally left blank
Download Pdf Manuals
Related Search