important!
Contents
1. 1 Power cable Connect only to a 120V power outlet Do NOT plug in fixture if the ground prong has been removed or broken off 2 Slave 1 Output This output plug will control the operation of any slave unit as slave 1 3 Slave 2 Output This output plug will control the operation of any slave unit as slave 2 4 Slave 3 Output This output plug will control the operation of any slave unit as slave 3 5 Remote Control Input This plug input is designed ONLY for the remote enclosed in the box for this system DO NOT plug any other devise any other devise will damage the unit and will void the warranty 6 Fuse Holder This component holds the 3 amp fuse When replacing the fuse always replace with the same exact size and amperage SET UP DATA CABLE REQUIREMENTS This G FORCE system includes three standard 3 pin XLR microphone cables for data input and data output If you require extended lengths you may use any standard microphone cable Remember that DMX cable must be daisy chained and can not be split SOUND ACTIVE OPERATION This function allows the G FORCE to run to the beat of the music without any type of controller 1 Install or mount your fixtures in a secure safe manner 2 Using the XLR cables connect all 3 slave units to the rear of the master unit a ioia 3 Connect the Control switch to the rear of the master unit The control switch a NIFC UNIT Fer a will allow you to activate the sound mode and also bl2. USER GUIDE _ LE 313 Ki N STAR BLAZER ODYSSEY Thank you for choosing Odyssey Lighting These lighting effect features have preinstalled lamps and are ready to be used IMPORTANT Please read this User Guide before attempting to operate unit OPERATING INSTRUCTIONS This unit is ready to be used Multi colored beams will chase amongst each other to audio bass sounds in music via the internal microphone Make sure the effect is installed and operated in a well ventilated area with fan vents clear of obstacles For the ultimate effect fog or haze must be used in order to see the colorful beams Although the unit is fan cooled the duty cycle must be applied CAUTION The lens area will get hot during normal operation of unit After operation allow sufficient time to cool down before handling or moving the unit IMPORTANT Never open the unit when in use Always disconnect the power cord from the power source when replacing lamps or servicing the unit Always replace fuse and or lamp with the exact same type LAMP REPLACEMENT Remove Lamp cover from the main body of the unit Gently remove the old lamp Then using a clean cloth or glove carefully insert the new lamp into the ceramic socket NEVER TOUCH A NEW LAMP WITH YOUR BARE HANDS or FINGERS oil and dirt on your skin will damage the bulb TROUBLESHOOTING 1 If the effect does not turn on a try plugging into an outlet you know is working b check fuse amp make su
3. ackout all your fixtures aati epee o ate a er 4 Connect ALL 4 fixtures to 120V AC lamp type may void warranty 5 Now press the button on the Control switch and the green LED will turn on Once the green LED is turned on your G FORCE system will chase via sound active For service contact your local authorized ODYSSEY dealer or call 626 334 0800 www ODYSSEYGEAR com page 2 IMPORTANT NEVER TOUCH any Halogen Lamp with bare fingers Oil from your fingers will move
4. re it is not blown Specifications Beam Spread Medium Lenses 1 per unit Beams Multi Bulb 1 per unit Lamp 12V 100W FCR Color Multi Sound Active Yes WARNING IMPORTANT IMPORTANT re Te CAUTION DUTY CYCLE NEVER TOUCH Remote Switch Green LED on UNPLUG UNIT any Halogen Lamp wit tare sound active l fingers Oil from your fingers will To avoid electrical shock unplug This device must be operated afe unit before sentcinal ona duty cycle shorten lamp life Never move LED off black out For Lamp Replacement Failure to comply may result in fixture until nae has enough Duty Cycle Continuous Only use exact same voltage amp extreme damage to unit and time to cool Lamps are not Warranty 90 Days lamp type may void warranty covered under warranty Width 10 5 Height 7 5 For service contact your local authorized ODYSSEY dealer or call 626 334 0800 Depth 10 www ODYSSEYGEAR com Package Weight 18 Ibs page 1 STAR BLAZER System 1 Master Fixture 3 Slave Fixture 3 XLR Data cable amp 1 Remote Switch USER GUIDE _ LE 313 f T STAR BLAZER 5 Remote Control 3 Slave 2 ODYSSEY Input O we Thank you for choosing Odyssey Lighting These lighting effect A ves features have preinstalled lamps and are ready to be used Output IMPORTANT USER MANUAL Please read this User Guide before attempting to operate unit CONTROLS amp FEATURES master fixture
Download Pdf Manuals
Related Search