3.2 Registering Video Wall Service
Contents
1. 19 22 4 2 Setting up Video Wall Agent 23 4 3 Connecting to Agent 5 24 Monitoring Video and Playing Back Recorded Video 24 4 4 Network Keyboard Buttons 25 Buttons TOF Operation COMIMANGS 25 Buttons for Agent System 26 6671 7 video e ae video INEX Video Wall Chapter 1 Introduction This document describes installation and operation of INEX Video Wall software which 15 designed to be used with INEX Standard or INEX Federation software The video wall service allows you to control monitoring on multiple monitors with network keyboards for centralized monitoring in a surveillance center If the video wall service is registered on an administration service the 1NEX system allows you to control monitoring for devices registered on the administration service If the video wall service is registered on a federation service the 1NEX system allows you to control monitoring for devices registered on the all administration services that are registered on the federation service Number of video wall services video wall agent systems and monitors are as follows Video Wall Service Registration Maximum of four per administration or2. 3 The list of users registered on the administration or federation service is displayed Select a user and click the Save button at the bottom You can change the password in the INEX Setup program User menu When the setting is changed the video wall service restarts 4 2 Setting up Video Wall Agent Setup Go to the Start Menu gt Click INEX Click VideoWallAgent Setup eoo VideowallAgent Setup Unregister Agent If the Agent system is not removed from a video wall service and all data is deleted while the software 15 uninstalled the Agent system cannot be registered again In this case clicking the Unregister button allows you to register the Agent system Restart Agent The Agent program runs automatically when the Agent program is registered on the video wall service and the Agent program keeps running as long as the Agent system is operating If you want to stop running of the Agent program temporarily enter the duration and click the Restart button The Agent program stops running and restarts after the entered length of time has expired Unregister Agent 220 Shutdown and restart the agent after set time minutes 6671 7 video 23 User s Manual Port Allows you to change the port number for the connection to the Agent system 1 Press on the network keyboard the video wall service ID on which the Agent 1 system
3. 6671 7 video User s Manual NOTES e In this document the server or server system refers to a PC on which service is running The agent system refers to a PC running the Video Wall Agent program e The iNEX program operates under 32 bit operating system When you install it under 64 bit of Microsoft Windows Vista or later operating system it is installed and operates in 32 bit compatibility mode 2 2 Installation NOTE In the Windows Start menu go to Control Panel Double click the Power Options to open the Management Properties dialog box Under the Power Schemes tab set both Turn off monitor and Turn off hard disks to Never CAUTIONS itis not possible to install the Agent program on the same as services or Client program If an older version of iNEX software is installed on your computer a screen appears asking you to upgrade the software In this case you are required to upgrade the software according to the instructions in the screen Server System 1 Insert the software CD in the video wall server 2 Run the Setup exe file of the software CD NOTE The User Account Control window might appear when using the Microsoft Windows Vista or later operating system Click Allow and install the software following the instructions 3 Select the language in which to run the program and then click OK Language Selector NOTES e To properly display the s
4. IP SURVEILLANCE BEYOND IMAGINATION User s 7 777 video e ae video INEX Video Wall Table of Contents Chapter 1 NTOdUCHON santa 1 11 11 11 eee eee 1 Video Wall Service Registered on Administration Service 1 Video Wall Service Registered on Federation 2 Chater 2 Installation 3 2 1 Product MTOM AMON piesa a 3 COMON 3 System gt 3 2 2 Installation 4 S15 gt 4 ___ 7 E A 9 Chapter 3 Getting Started 11 31 RUNNING oC CS 11 3 2 Registering Video Wall 11 Registering on Administration 12 Registering Federation Service 14 Chapter 4 Monitoring Using the Agent 19 4 1 Registering Video Wall Agent System 19 Registering Agent System
5. following the instructions Note Wibukey Device Driver is rquired to start service iNEX WibuKey Setup Welcome to the WibuKey Software Setup program This x Remove a WIBU KEY on Your PC while installation of WIBU KEY Device Driver 3 E2 program will install WibuKey Software on your computer It is strongly recommended that you exit all Windows programs the control panel before running this Setup program Click Cancel to quit Setup and then close any programs you have tunning Click Next to continue with the Setup program WinZip Self Extractor WkRuntime exe Welcome to the WibuKey Runtime Kit version 6 00a Setup Build 129 2009 12 03 Please click Setup to install the Version 6 00a WibuKey driver and tool files Cancel Cancel Unzipping WkUselS chm 6 7 2 1 7777 Video INEX Video Wall 1 WibuKey Setup WibuKey Software Setup is complete Setup can launch the Readme help file with the latest product f informations Yes want to view the Readme text now Click Finishe to complete Setup 10 When the following screen appears click the Close button 2 to complete the installation Installation Complete NOTE After successfully installing the service the service Service Manager program the amp icon is displayed in the notification area of the task bar and the Setup program run automatically 11 Connect WIBU Keys to the video wall ser
6. 1s registered 2 Press the button 3 Press the monitor ID 1 4 Press the button Monitoring Video and Playing Back Recorded Video 1 Press on the network keyboard the F2 button A list of panels appears Click Live or Play DVR Search by using the mouse connected to the network keyboard 2 Press on the network keyboard the F4 button A site list is displayed in the current Live or Play DVR Search panel Select a site to connect to from the site list and drag and drop it on the Live or Play DVR Search screen by using the mouse connected to the network keyboard Live or recorded video from the selected site 15 displayed on the screen 3 Press on the network keyboard the Menu button The live or play screen menu 15 displayed 24 Srscon INEX Video Wall 4 Moving to the desired item by using arrow buttons Reagan and pressing the enter button 441 selects the item in the menu releases the selection If you Image Zoom want to exit the current item setting press the Alarm Out Menu button and releases the selection Listen Talk Audio Broadcast Instant Recording MultiStream Hotspot Event Spot Map Event Spot Image oom Motion Object Search Image Processing Draw Motion Block Draw Video Analysis Aspect Ratio Aspect Ratio Save Still Image Save Still Image Remove Remove 5 Refer to 4 4 Network Keyboard Buttons p 25 for the explanations about cont
7. Registering on Administration Service 1 Go to the Start Menu Click Run the Setup program and enter login information Enter user ID and password iNEX Client iNEX Setup 5177 Ste name 7 Remember my ID on this computer e Site Name Select the administration service to connect to from the list You can add other administration services to the list or modify information about the administration service in the list by clicking the button at the right Append Remote Site Site Name Service Address Service Port Designate the name lt lt of the administration service and enter the IP address and port number of the administration server to which the video wall service Serve rorta is connected default 11001 User ID Password Enter your user ID and password The default user ID is admin and default password is 12345678 You can change the user ID and password in the User menu Refer to the INEX Standard User s Manual for details Remember my ID on this computer Check the box if you want to save your ID for logging on 2 Select the Service menu and then register a video wall service on the administration service following the procedures below 12 2966 9111 video INEX Video Wall 0 iNEX Setup admin 127 0 0 1 Monitoring Service Monitoring Service 10 0 110 103 11004 127 0 0 1 11004 ON LINE DEMO 17Sdays 3 Click the button at t
8. Search panel and allows you to s search and play back recorded video of the device connected to the selected camera screen in the Live panel 15 connected e SHIFT amp Returns to the previous Live panel i Plays video backward at high speed in the playback mode Play Backward Step amp 4 Plays video backward image by image in the playback mode 26 236 7777 Video Video Wall Plays back video Pressing the button while playing back Play Pause video pauses the video Fast Forward Play e Plays video forward at high speed in the playback mode 8 Plays video forward image by image in the playback mode Displays the screen menu of the selected camera screen Enter Button Selects an item in the screen menu of the selected camera Forward Step Toggles the zoom size when in the zoom mode Navigates through items in the screen menu of the selected camera R 1 Arrow Buttons screen gt Moves the zoomed in area when in the zoom mode Functions only when in the playback mode 23 Jog Dial Plays video forward or backward image by image by turning the jog dial clockwise or counterclockwise when playback video has been paused Functions only when in the playback mode Plays video when in the playback mode The shuttle ring is spring loaded and returns to the cente
9. 1 ON LINE DEMO 17Sdays left Video Wall Service 10 0 110 103 11006 192 168 56 1 11 ON LINE DEMO 17Sdays left 2 Select a video wall service and click the 4 button at the bottom in the Service menu The Setup Video Wall Service window appears Select the Agent Setup tab a7 1 7 Video 19 User s Manual Setup YideoYall Service Agent Setup 3 Click the Add button at the bottom The Add Agent to Video Wall Service window appears Add Agent to VideoWall Service Connection Information Address Port Enter the IP address and port number of the Agent 4 Click the OK button The Modify Agent window appears Modify Agent Eni aent 1 Agent informato 1280 x 1024 Whit WDISPLAY2 1920 1080 DISPLAY 1 Name Allows you to change the Agent system name Address Port Displays the IP address and port number of the Agent system Description Displays the Operating System information of the Agent system Number Displays ID of each monitor connected to the Agent system The ID 1s used to distinguish the monitor from other monitors when controlling the Agent system with a network keyboard so each must have a unique ID Resolution Displays the resolution of each monitor connected to the Agent system Description Displays information of each monitor connected to the Agent system 5 Click the OK button A list of registered Agent system 15 displayed 20
10. 6671 7 video INEX Video Wall Setup VideoWall Service Agent Setup SOPHIA PC 10 0 110 102 1 Wht 5 2 1280 1024 2 Wt ADISPLAY1 1920x 1080 6 Register the network keyboard on the administration or federation service Select the Device menu Click 2 Network Keyboard Setup button and the Network Keyboard Scan window appears The way to register a network keyboard 1s identical to the way to register a device 0 iNEX Setup admin 127 0 0 1 Network Keyboard Scan 25 11 Auto Scan LAN All Devices Device Group Layout Address Status 8g Layout Sequence Info Desk 10 0 126 67 Not registered Camera Sequence Og Inside 1 10 0 112 142 Not registered O User Aam Dg Inside 2 10 0 123 163 Not registered ser Aam Map 7 Register the video wall service on the network keyboard Refer to the network keyboard User s Manual for details a7 1 7 video 21 User s Manual Add Video Management System 77 ID Name Video Management System Connection Ethernet IP Address Use DVRNS Control Port 8010 UserID Password Registering User ID video wall service ID The network keyboard assigns the ID automatically when the video wall service 1s registered and you can change the ID The ID 1s used to distinguish the video wall service from other video wall service when connecting to the v
11. elected language your PC s operating system should be set to support the selected language e change the iNEX 5 language after the software has been installed select Language Selector the Utility folder of the Start menu before running the program 4 When the following screen appears select Install and click N ext Welcome to the iNEX Setup Wizard 4 e ae video INEX Video Wall 5 Select Video Wall Service and click Next iNEX Select Program to Install Select Programs Video Wall Service Client 6 Designate the folder path to install the service Clicking the Disk Cost button shows the available and required disk _ space for each hard disk drive for the installation Then click N ext The installer will install iNEX to the following folder To intall in this folder dick Next To install to different folder enter it below or dick Folder Disk Cost 7 Enter the IP address and port number of the administration 2 or federation service and click Next You change the 2212 1212 settings in the Service Manager program after completing installation When the installation 1s complete the video wall service is connected to the administration or federation _ service via the network if the services are operating 10 0 110 102 11001 Next gt 8 When the following screens appea
12. en of the Client program F8 4 F4 Displays or hides the Agent program s software version Buttons for Agent System Control NOTE Some functions may not be supported depending on the connected device Instant Camera Screen ID _ Starts instant recording for the selected Recording On camera screen Instant Camera Screen ID amp 1 Stops instant recording for Recording Off the selected camera screen Camera Screen ID Activates the alarm out 1 of the device Alarm Out On connected to the selected camera screen e Alarm out device No _ Activates the selected alarm out Camera Screen ID SHIFT amp Deactivates alarm out 1 of the device connected to the selected camera screen Alarm out device No SHIFT amp Deactivates the selected alarm out Allows you to change a screen format Select a screen format Display by using arrow buttons and enter button 1 amp Changes to the 1x1 screen format Pressing the button again returns to the previous screen format Moves to the next camera group Alarm Out Off Freeze Freezes the current live images on the screen SHIFT amp Zooms in the current live images on the screen Zoom You can move the zoomed in area by using arrow buttons and enter button 1 1 Panel Toolbar Displays or hides a panel toolbar Displays the Play or DVR
13. er on the federation service and click the OK button iNEX Setup 10 0 112 12 98 Name Address Video Wall Service Video Wall Service 10 0 110 103 11006 192 168 56 1 11 ON LINE DEMO 179Sdays left 5 Select a video wall service and click the button at the bottom The Setup Video Wall Service window appears Select the Information tab 16 2966 9111 video Setup Video Wall Service Information Address 10 0 110 103 11006 192 168 56 1 11006 Description 6 Enter the video wall service s name and click the Close button 6671 7 video INEX Video Wall 17 User s Manual 18 6671 7 video INEX Video Wall Chapter 4 Monitoring Using the Agent Program You can control monitoring on multiple monitors with network keyboards NOTE If User Account Control is turned on in the Agent system the Video Wall Agent program may not work In this case turn User Account Control off Start menu Control Panel User Accounts and Family Safety User Accounts Turn User Account Control off and run the Video Wall Agent program 4 1 Registering Video Wall Agent System Registering Agent System 1 Go to the Start Menu Click INEX Run the Setup program and enter login information iNEX Setup admin 127 0 0 1 BO A Address Monitoring Service amp Monitoring Service 10 0 110 103 11004 192 168 56 1 1
14. er program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law inex Select Program to Install Select Programs Video Wall Agent Select Installation Folder The installer will install iNEX to the following folder To intall in this folder dick Next To install to a different folder enter it below or dick Browse Folder Disk Cost Installing iNEX is being installed Unpacking package file 8 Srscon INEX Video Wall NOTE The following screen appears when using Microsoft 8 Windows Vista or later operating systems 15 recommended that you check the Disable WS Discovery Windows Service fdPHost FDResPub box If you do not check the box the program cannot auto scan devices using ONVIF Conformance protocol when scanning devices for device registration NOTE NET Framework and the Visual C Runtime Libraries are installed automatically and it may take some time This installation step will be skipped if the programs are already installed on your computer 8 When the following screen appears click the Close button to complete the installation Installation Complete NOTE After successfully installing the s
15. ervice the service Service Manager program the icon is displayed in the notification area of the task bar and the Setup program run automatically 1 Stop running the services and Agent program first NOTES e The iNEX software might not uninstall correctly if you uninstall it while the services or Agent program is running e f an Agent system is registered the service remove the Agent system before uninstalling the INEX software If the Agent system is not removed from the service and all data is deleted while the INEX software is uninstalled it is required that you unregister the Agent system in the Agent program Refer to 4 2 Setting up Video Wall Agent Setup p 23 for details CAUTION The iNEX software should be uninstalled following the procedures below If you delete the installation folder manually the software cannot be uninstalled or reinstalled 2 Go to the Start Menu and click Click Uninstall 6671 7 video 9 User s Manual NOTE You can uninstall the software by using the software 8 INEX CD Insert the software CD in the video wall server and run Welcome to the Setup Wizard the Setup exe file Select Remove and click Next 3 Click Yes when the following screen appears Uninstall iNEX 1 Are you sure you want to uninstall this product 4 Click the Remove All or Do not remove button when the following screen appears Clicking the Remove All button dele
16. federation service Video Wall Agent System Registration Maximum of 64 per video wall service depending on the type and number of the WIBU Keys Ask your dealer or distributor about the number of video wall agent system that can be registered using your INEX software Monitor Registration Maximum of 6 per video wall agent system NOTES e This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org e The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSourceGuide OpenSourceGuide pdf or as a printed document included along with this document 1 1 System Diagram Video Wall Service Registered on Administration Service Boe 59 Network K iNEX Administration iNEX Monitoring Network iNEX Video Wall 7 2 1 t 7777 Video 1 User s Manual Video Wall Service Registered on Federation Service ard iNEX Video Analytics Federation iNEX Administration Streaming iNEX Monitoring Network mer Cameras Network Analog Cameras iNEX Administration Monitoring Cameras Analog Cameras 2 7 2 1 7777 Video INEX Video Wall Chapter 2 Installation 2 1 Product Information Package Contents Installation CD U
17. he bottom The Service Registration window appears and a list of available services 1s displayed with information about each service Name Displays services that are currently connected to the administration service via the lt PEPEE network Video Wall Service Video Wall Service 10 0 110 103 11006 192 168 56 1 11006 Displays the service type e Address Display the IP address and port number of each server Service Registration 4 Select a video wall service to register on the administration service and click the OK button 7 2 1 t 7777 Video 13 User s Manual iNEX Setup admin 127 0 0 1 Se 10 0 110 103 11004 192 168 56 1 11 ON LINE DEMO 179days left 10 0 110 103 11006 192 168 56 1 11 ON LINE DEMO 179days left 5 Select a video wall service and click the LF button at the bottom The Setup Video Wall Service window appears Select the Information tab Setup Yideo Wall Service Information Video Wall Service Address 10 0 110 103 11006 192 168 56 1 11006 Description 6 Enter the video wall service s name and click the Close button Registering on Federation Service 1 Go to the Start Menu Click INEX Run the Setup program and enter login information 14 e ae video INEX Video Wall Enter user ID and password Client iNEX Setup Ste Name 2 Remember my ID on this co
18. ideo wall service with a network keyboard so each must have a unique ID Name Set up a video wall service name for your reference IP Address Enter the video wall server s IP address Do not check DVRNS Control Port Enter the Network Keyboard Port number set in the video wall server Check the Network Keyboard Port number in the Service Manager program Option menu Server Option setting User ID Password Enter the user ID and password for the connection to the video wall service Check the user ID and password in the INEX Setup program Service menu video wall service LF button User Setup tab NOTE The Agent program automatically logs in to the video wall service on which the Agent system is registered with the preset User information The default user is Administrator 1 Go to the Start Menu Click Run the Setup program and enter login information iNEX Setup admin 127 0 0 1 n Address Monitoring Service 10 0 110 103 11004 192 168 56 1 11 Video Wall Service 10 0 110 103 11006 192 168 56 1 11 Status ON LINE DEMO 179days left ON LINE DEMO 179days left 2 Select a video wall service and click the button at the bottom in the Service menu The Setup Video Wall Service window appears Select the User Setup tab 22 2966 9111 video INEX Video Wall Setup VideoWall Service User Setup
19. mputer Site Name Select the federation service to connect to from the list You can add other federation services to the list or modify information about the federation service in the list by clicking the button at the right Append Remote Site Site Name Service Address Service Port Designate the name on of the federation service and enter the IP address and port number mene ha of the federation server to which the video wall service is connected default 11000 User ID Password Enter your user ID and password The default user ID is admin and default password 18 12345678 You can change the user ID and password the User menu Refer to the Standard User s Manual for details Remember ID on this computer Check the box if you want to save your ID for logging on iNEX Setup admin 10 0 112 12 98 2 Select the Service menu 3 Click the Video Wall Service and then the button at the bottom The Service Registration window appears ae OT video User s Manual Name Displays services that are currently connected to the federation service via the network Video Wall Service Video Wall Service 10 0 110 103 11006 192 168 56 1 11006 Displays the service type e Address Display the IP address and port number of the each server Service Registration 4 Select a video wall service to regist
20. r click Next Confirm Installation Installing iNEX The installer is ready to install on your computer is being installed Click Next to start the installation Unpacking package file 6671 7 video 5 User s Manual NOTE The following screen appears when using Microsoft 8 Windows Vista or later operating systems Itis recommended that you check the Disable WS Discovery Windows Service fdPHost FDResPub box If you do not check the box the program cannot auto scan devices using ONVIF Conformance ick Next to protocol when scanning devices for device registration Disable WS Discovery Wi Note Some devices are unable to auto scan NOTE The following screen appears when the port number INEX of the service being installed is already in use and the screen 1 E EE displays the port number that will be changed The changed port number will be applied when the service starts operating after installation Following service ports will be changed to avoid port redundancy NOTE NET Framework and the Visual C Runtime Libraries are installed automatically and it may take some time This installation step will be skipped if the programs are already installed on your computer 9 Disconnect the WIBU Key from the server ifa WIBU Key is connected Then install the WIBU Key device driver Decide Wibukey Device Driver Installation
21. r position when released Turning Shuttle Ring the ring clockwise or counterclockwise plays video forward or backward The playback speed varies with the amount the ring 15 turned fast forward and rewind Controls the playback speed the DVR Search panel WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling ay Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal V1 9 Epa 7rr video 27
22. rolling with other buttons of the network keyboard 4 4 Network Keyboard Buttons The following is an explanation of the network keyboard buttons used to control the Agent system Refer to the network keyboard User s Manual regarding buttons for PTZ control Buttons for Operation Commands Number 1 to 9 ID Selects a monitor camera screen or Agent system to control Number 0 Does not function as a command button e SHIFT Button Performs the secondary function for buttons that support two functions e ESC Cancels a command during its operation e Video wall service ID DEV Connects to the video wall service Disconnection SHIFT amp Releases the connection to the Agent system Camera Screen ID Selects the camera screen Monitor ID Selects the monitor Releases the connection of the currently selected camera screen or device 7 2 1 t 7777 Video 25 User s Manual F1 Displays monitor ID when using more than one monitor F2 Displays or hides a list of panels The maximum number of each panel is the same as that of the iNEX Client program F3 Displays or hides a PIP screen The PIP screen shows the enlarged area of where the mouse cursor is located Function 1 to 8 ite li F4 Displays or hides a site list F7 SHIFT amp F3 Displays or hides the Preference setup scre
23. ser s Manual WIBU Key USB Dongle NOTES e faWIBU Key is removed from a video wall server the video wall service and video wall agent program might not work properly e When you connect or remove a WIBU Key stop running the video wall service first System Requirements e Operating System Microsoft Windows XP x86 32 Bit Vista Home Standard Business Ultimate Enterprise Microsoft Windows 7 Home Premium Professional Ultimate Microsoft Windows Server 2003 2008 CPU Intel Core Quad 8200 2 33 GHz Intel Xeon 3 0 GHz or faster RAM 2GB or more VGA ATI RadeonTM HD 2400 or NVIDIA GeForce FX5500 ATI recommended 1024x768 24bpp or higher Hard Disk Drive 5 GB or more free space LAN Gigabit Ethernet or faster Agen m Recommended Requirements e Operating System Microsoft Windows 7 Home Premium Professional Ultimate e CPU Intel 17 Ivy Bridge 2 33 GHz or faster 2GB or more VGA ATI Radeon HD 5450 or later 1024x768 24bpp or higher Hard Disk Drive 350 MB or more free space LAN Gigabit Ethernet or faster Minimum System Requirements e Operating System Microsoft Windows 7 Home Premium Professional Ultimate CPU Intel 17 Sendy Bridge 3 0 GHz or faster RAM 2 GB or more VGA ATI Radeon HD 5450 or later 1024x768 24bpp or higher Hard Disk Drive 350 MB or more free space LAN Gigabit Ethernet or faster
24. tes all saved data including backed up video and previous settings in the system Clicking the Do not remove button uninstalls the software without deleting any saved data in the system and keeps all saved data in the system iNEX INES Do you want to remove all saved data WARNING De you really want to erase Remove all Do not remove Cancel NOTE The deleted data cannot be restored once the data is deleted 5 Click the OK button to complete the uninstall process 10 7 2 1 7777 Video INEX Video Wall Chapter 3 Getting Started Services should be running on the INEX server for the iNEX program to operate 3 1 Running Services When the video wall service is installed the service runs automatically You Client can also start or stop running the service manually Go to the Start Menu INEX Setup ServiceManager Click Run the Service Manager program Uninstal Check the status of the service If the service is not listed as Working under Status start the service ae manually Refer to the INEX Standard User s Manual p for details about the Service Manager program 3 2 Registering Video Wall Service You must register video wall services max 4 the administration or federation service If the IP address and port number of the administration or federation server is entered correctly during the installation the ser
25. ver Agent System 1 Insert the software CD in the video wall server 2 Run the VideoWallAgentSetup exe file of the software CD NOTE The User Account Control window might appear when using the Microsoft Windows Vista or later operating system Click Allow and install the software following the instructions 3 Select the language in which to run the program and then click OK Language Selector Sane To properly display the selected language your PC s operating system should be set to support the selected language e change the iNEX program s language after the software has been installed select Language Selector the Utility folder of the Start menu before running the program 7 2 1 t 7777 Video 7 User s Manual 4 When the following screen appears select Install and click Next 5 Select Video Wall Agent and click Next 6 Designate the folder path to install the service Clicking the Disk Cost button shows the available and required disk space for each hard disk drive for the installation Then click Next 7 When the following screens appear click Next Confirm Installation The installer is ready to install iNEX on your computer Click to start the installation iNEX Welcome to the iNEX Setup Wizard The installer will guide you through the steps required to install on your computer WARNING This comput
26. vice is registered on the administration or federation service automatically Registering the video wall service on the administration service allows you to control monitoring for devices registered on the administration service Registering the video wall service on the federation service allows you to control monitoring for devices registered on the all administration services that are registered on the federation service The video wall service should be connected to the administration or federation service via the network connection on which the video wall service is registered Go to the Start Menu and click INEX Run the Service Manager program and click the Option Server Option menu Client iNEX Service Manager iNEX Setup Uninstall Gaito Administration Service Monitoring Service Operation Option Authentication Log Video Wall Service 36 Video 11 User s Manual service Uption Service Port Enter the port number for connection to the Network service Network Keyboard Port Enter the port number for connection to the video wall service from a network keyboard The port number will be used when you control the Agent system with the network keyboard External Address Enter the external IP address and port number for connection to the service from an external network Network Keyboard Port External IP Address Address Port
Download Pdf Manuals
Related Search