User Manual User Manual
Contents
1. the Machine Rotate the knob as shown in figure n 1 And open the cover First set the plastic ejecting disc 2 then the disc selected for the cutting on top of the plastic disc Close the cover and reverse the rotation of the handle Hit the start button to automatically hook the discs in the correct position 2 www AvantcoEquipment com EQUIPMENT VANTCO User Manual Cover Opening 1 Disc Position 2 Setting and Cutting the Food Lift the handle and set the food inside the opening as shown in figure n 3 Then close the handle Press the green start button with your right hand and with your left hand lightly move the handle downwards until food has passed through the hopper Lift the handle to add more food The machine starts automatically when the handle is closed Repeat these operations as needed WARNING NEVER USE YOUR HAND TO FEED ANYTHING THROUGH THE HOPPER Release and Replacement of the Discs Turn the handle and lift the cover Fig 1 Turn the d isc anticlockwise and cover the cutting edge with appropriate material as rubber fabric etc then lift it by setting your hand under the disc www AvantcoEquipment com 9 EQUIPMENT User Manual VANTCO Cleaning and Maintenance Operations Before carrying out any cleaning or maintenance operations check to make sure that the mains switch is off and the plug disconnected Use a damp cloth and a non abrasive detergent to clean the machine and discs Th2. AVANTCO User Manual Avantco Continuous Feed Food Processor Model CFP5D Please read and keep these instructions Indoor use only www AvantcoEquipment com 1 EQUIPMENT User Manual VANTCO Safety 1 The food processor must be managed by skilled personnel that are familiar with the instructions for use and safety contained in this manual 2 This machine comes with several safety systems but users must avoid setting their hands and loose objects near the cutting discs and moving parts 3 Before any cleaning and maintenance operations check to make sure the machine is disconnected from the power source 4 Never use the food processor to with frozen food 5 Never replace or repair parts on your own Consult an authorized service agency 6 Operate the processor on a clean dry and level surface 7 If the power cord is damaged do not use Contact the distributor for a replacement power cord Installation and Operation 1 Unpack your food processor and place on a clean dry surface 2 Inspect the unit for damage including the power cord Do not use if any damage is found 3 Locate the unit near a 110 120v 1phase outlet If you are unsure of the electrical connection contact a qualified electrician before using 4 It is recommended to clean the equipment prior to first use Use of the Equipment Controls 1 Green button for starting the machine 2 Red button for stopping the machine Setting the Discs on
3. e discs are dishwasher safe Do not run the base unit in the dishwasher Never use steel wool or any abrasive chemicals on the discs or machine Technical Specifications CONNECTION CFP5D 9 X22 5 X20 51LBS 550 WATTS 110V 1 PHASE 60Hz Wiring Diagram 110V 110V 60HZ RI 450V 50W 4 www AvantcoEquipment com EQUIPMENT VANTCO User Manual Parts Diagram No PartName 3 4 2 j 5 on 300 005 Input body 6 dm 300 007 Spring 7 300 0090 Pin 8 300 011 Knife disc 7 300 012 Draindisc 9 E 300 014 Pin 10 e A 300 015 Oilenvelope 11 12 300 018 Geer J 14 TE NN 300 022 __Sest of body bod 15 Botton board of bo 7 300 026 17 i 18 f Y lt _ 300 029 Nut 19 ww 20 f V N 21 E 300 035 Body 25 300 036 Microswitch 300 038 Swith 300 040 Bet 300 041 1 Motor 300 042 Gasket 24 EIS Gaskets 044 Bolt 25 2 4 300 046 Bolt www AvantcoEquipment com 5 EQUIPMENT User Manual VANTCO Limited Warranty All equipment which is sold under Avantco trademark and used for commercial purpose is warranted against defects in materials and workmanship The warranty runs for one year from the date of original installation and is for the bene
4. fit of the original purchaser only All other Warranties Expressed or Implied Statutory or Otherwise including Withoutimitation any implied Warranty of Merchantability or Fitness for Purposes are excluded The Seller shall in no event be liable for direct indirect or consequential damages in connection with Avantco commercial products This warranty is not effective if damage occurs because of accident carelessness improper installation lack of proper set up supervision when required or if the equipment is installed or operated in any manner contrary to thE installation and operating instructions In these cases repairs will be made at a reasonable cost Work performed by unauthorized personnel or unauthorized service agencies voids this Warranty This warranty does not apply to and Avantco is not responsible for any warranty claims made on products sold or used outside of the United States 6 www AvantcoEquipment com
Download Pdf Manuals
Related Search