User Manual
Contents
1. Earphone User Manual2. MP3 Tape User s Manual 1 Appearance Fagnetic inductor Ear Phone USB Port On OFF Switch al nena LEHI M LEDZ EQ Vol Last Play Pause 2 General Operation ON OFF Switch Before you use this player this switch must be set to ON In order to save the lithium ion battery power If the player is not used for a time the switch should be set to OFF This is an overall switch if the player does not work with the switch ON please charge it USB Port It s connected to PC or car charger or adapter The internal battery can be charged The charging time is about 1 5 hours If connected to PC it can be used as an SD MMC card reader Memory Card You can insert SD MMC card to this socket the mp3 songs in the card can be played If the player is in power on status without SD MMC card both LED1 and LED2 will flash simultaneously Play Pause When the player is powered off on ON OFF switch must be set to ON firstly then press and hold this button for 2 seconds the player will be powered on off LED1 slow flashing means pause status fast flashing means playing status LED1 LED2 lighting off means player turning off Standalone MP3 player s Button Vol Last Next EQ Play Pause The 6 buttons are standard mp3 button Magnetic inductor Switch ON OFF to ON then insert the player into the car stereo it works like magnetic tape Magnetic inductor i
3. s the component to transmit the songs to car stereo and the FFW RW button in the car stereo can be used as control 3 Play MP3 in your car stereo boom box cassette Set the ON OFF switch to ON and insert into car stereo or boom box or cassette if in car stereo the mp3 songs in SD MMC card can be played automatically While you should press down the play button of boom box or cassette player to start playing In all cases the songs are played sequentially If the song s volume is very low please use the reversed side When the player is working you can press down the fast forward rewind button of cassette to select the next or previous mp3 songs press down and hold the button for a 4 second the next or previous selecting operation will be executed at once When you press down and hold fast forward rewind for a long time the next or previous operation will be executed faster and faster 4 Use as a standalone MP3 player Set the ON OFF switch to ON then press and hold Play Pause key for 2 seconds until both LED1 and LED2 light on after 1 second LED2 blue will be extinguished then shortly press Play Pause key again the player will be in playing status with LED1 red fast flashing In playing status shortly press Play Pause key the player will be in pause status with LED1 red flashing slowly In playing status shortly press Vol key the
4. song volume can be increased or decreased Shortly press Last Next key you can play the previous or next mp3 song Shortly press EQ key you can select the music equalizers In playing status press and hold Play Pause key for 2 seconds the player will be in stop status with LED1 red lighting on In stop status press and hold Play Pause key for 2 seconds the player will be powered off In stop status the player will turn off automatically after a time 5 Use as a SD MMC card reader Set the ON OFF switch to ON connect the player to a PC via USB cable both LED1 red and LED2 blue will light on and a removable disk appears in your PC You can transfer data between the PC and SD MMC card once finishing LED1 red and LED2 blue will flash alternately 6 Some questions The following reasons may bring no sound 1 Battery low 2 No SD MMC card inserted 3 The cassette s volume too low 4 The cassette not in correct status The following problems mean low battery 1 In playing status the player is powered off automatically 2 The player can not be turned on lf the player powers on without SD MMC card or card is damaged both LED1 and LED2 will flash simultaneously If you try to play it but there is no mp3 song in SD MMC card the LED1 red will flash once then light on 7 Accessories MP3 tape player Mini USB cable Charger for car General charger
Download Pdf Manuals
Related Search