WeatherShield 575W series 1200W series
Contents
1. installa tions is present Do not cover the WeatherShield Before rigging make sure that the installation structures can hold a minimum point load of 10 times the moving head s weight Do not operate the WeatherShield in strong winds Do not hang additional weatherproof material over WeatherShield while the moving head is in use Always install a safety cable that can hold at least 10 times the weight ofthe moving head You must only use safety cables with screw on carabines The maximum ambient temperature 30 C should be never exceeded Fixtures with the WeatherShield installed must be handled by a two people When rigging derigging or servicing the fixture with WeatherShield installed staying in the area below the installation place on bridges under high working places and other endangered areas is forbidden 2 Installation 1 Place the fixture upright down on two tables 2 ight cases or similar supports 2 Put the WeatherShield 3 on the base 1 of the fixture 3 Fasten clamps 5 with M12 bolt and lock nut to the two omega holders 6 through the holes in the omega holders gt 4 Lift off the rubber protecting covers 8 and fasten the omega holders 9 into the base of the fixture using their quarter turn fasteners 7 and turn them fully clokwise Check if the quarter turn fasteners are locked Close the rubber covers back 5 Cut through marked guideline 11 in the two rubber protecting covers in order2. show lighting gt WeatherShield 575W series 1200W series version 1 1 USER MANUAL ROBE Show Lighting s r o e Czech republic e www robe cz FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INSTALL THE WEATHERSHIELD The WeatherShield 1200W 575W is a shelter for partial protection of 1200 AT 575 700 AT series of the moving heads against weather conditions in temporary outdoor applications The shelter effects moving heads cooling we do not recommend it use in ambient temperature above 30 C 1 Safety instructions Every person involved with installation and maintenance of this product has to be qualified follow the instructions of the manual CAUTION This product is for professional use only This product has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the product This product was designed for partial protection of fixture s base against weather influences drizzle snow etc in temporary outdoor applications The product does not make fixture fully waterproof The risk of potentially danger electric shock increases if the moisture in electrical
3. to create a slot for safety cable Lift off the rubber covers and thread the safety cable 12 through both covers and through the two apertures 4 in the base of the fixture Close the rubber covers back 6 The fixture with WeatherShield fitted is now ready for rigging Two people are required to lift and handle the fixture After rigging the fixture fasten the safety cable to the attachment point truss support CAUTION Avoid illuminating the WeatherShield by the moving head X N a Y 3 Cleaning A soft lint free damp cloth and soapy water is recommended for cleaning the WeatherShield under no cir cumstances should alcohol or solvents be used 4 Technical specifications Construction Flame retardant ABS Maximum ambient temperature of aspirated air by running fixture 40 C Dimensions WeatherShield 575W WeatherShield 1200W 615 615 Weight 2 1kg Application Weather Shield 575W for 575 and 700 AT series of moving heads Weather Shield 1200W for 1200 AT series of moving heads 5
Download Pdf Manuals
Related Search