Midi Activation module instruction sheet.
Contents
1. FL P1 Upgrade Midi Activation Module User instructions This unit has had the midi activation module installed most of the FL P1 functions will be the same as normal with a few exceptions Using the supplied midi to serial lead connect your FL P1 to your midi source The lead supplied has a midi socket attached so that your normal midi leads will plug straight in When you power up the FL P1 it will be in midi mode amp automatically searching for a midi signal this can be deactivated by holding down the BLACKOUT button for 2 seconds The FL P1 will now be in normal manual mode and function just like any other FL P1 and will ignore any midi signals sent to it Do this if you only require manual operation When in midi mode the FLOOD led will be illuminated and the STEP led will be dim Whilst in midi mode the FLOOD button has no normal flood use function ONLY Use short button pushes in normal use to avoid entering other modes like flood setup midi no midi etc When in midi mode a midi note between 0 127 will trigger the manually chosen pattern and start it chasing etc Stop sending a note and it will enter the flood pattern this is created by you as per normal instructions Example connect to a keyboard midi out start playing amp pattern runs stop playing amp flood activates All patterns amp auto sound speed functions are selected manually as normal through the buttons on the FL P1 No patterns can be altered speed adjust2. ed etc via midi If the FL P1 is in midi mode when you create your desired flood pattern you must exit amp re enter midi mode after saving flood amp returning to pattern run to reset the midi or power off the unit amp back on again All other functions are the same as the normal FL P1 and the standard manual applies to these Anything listed in this supplement over rides the normal user manual instructions
Download Pdf Manuals
Related Search