"user manual"
Contents
1. Press 4X button to arm in mute arming mode e Anti jamming and engine immobilization 3 Disarm e Low power consumption lt 3mA Press button to disarm the system Panic Press to locate the motorcycle 1 Arming Press 8 button to arm in alarm arming mode When the system is impacted at the first time the turn signals will flash 3 times with siren chirping If the system is impacted for the second time within 15 seconds the siren will chirp sharply with turn signals flashing for 15 seconds and the engine will be immobilized Press dx button to enter mute arming mode When the system is impacted at the first time the turn signals will flash 3 times If the system is impacted for the second time within 1 5 seconds the turn signals will flash for 15 seconds and the engine will be immobilized 2 Emergency alarm In arming mode if the key is turned to ACC ON position the siren will alarm sharply the turn signals will flash and the engine will be immobilized Press any button to stop alarming 3 Disarming and rearming In arming mode press 3 button to disarm the system If the motorcycle is not impacted or the engine is not started in 30 seconds the system will return to the former arming mode automatically Press 3 button twice the turn signals will flash twice and the system will be disarmed completely 4 Locating by sound and light In arming mode press amp for 2 seconds the siren will chirp for 1 52. STEEL MATE 886E series Automotive Motorcycle Alarm System Think safety think Steelmate ETA TG Oe oHsasieo 1999 STEELMATE CO LTD www steel mate com SS All rights reserved SS The trademark patent and copyright are owned by Steelmate Co Ltd The right to change the design and specifications reserved M an u al User s Manual Installation Manual Important notice Installation guide Key features ECU installation Technical parameter Siren installation Brief look at each device Warranty terms Warranty card 1 Locating by sound and light Not armed warning Anti hijacking Remote engine stop Adjusting the sensitivity of shock sensor Important notice Technical parameter e Please install the system by an authorized e Voltage 9 16V engineer e Static current lt 3mA e Keep the product and the transmitters from water e Siren SPL 105 125dB e It is highly recommended you read this manual e Frequency range 433 92MHz carefully before the installation and operation of this unit eWhen the transmitter operating distance is shorter or its indicator light turns dark please replace the battery with a new one ASAP Motorcycle Alarm System User s Manual Key features Brief look at each device e Fashionable transmitter Arm e Water resistant ECU Press 8 button to arm in alarm arming mode e Sensitivity adjustable dx Mute e Remote control arming disarming locating
3. rranty terms Please mount the The unit is warranted for a limited period of time ECU downwards from the date of purchase In the unlikely event of a defect arising in this product when used in accordance with the manufacturer s instructions the parts would be repaired or replaced free of charge It is required to show warranty card when making any warranty claims The model and serial number on the unit must be the same as the information on the warranty card Please mount the siren downwards as shown in ll This warranty is non transferable and is the figures 1 or 2 below automatically void if The original purchaser has not completed the warranty card The unit s serial number is defaced missing or Tiin altered signals L The unit has been modified or used in a manner contrary to its intended purpose The unit has been damaged by accident unreasonable use neglect improper installation or service Yellow Flame out wire Engine lock lll The warranty does not cover damage to the unit caused by installation or removal of the unit Motorcycle alarm system Motorcycle Warranty card Dear user Thank you for choosing this product Please fill the form below and retain it User s information Vehicle license No Product model No Date of installation Name of the retailer Signed by distributor
4. seconds with turn signals flashing to locate the motorcycle 5 Not armed warning When the motorcycle is ACC off and the system is not armed in 10 seconds the siren will chirp 3 times with turn signals flashing 3 times to remind the owner to arm the system 6 Anti hijacking During driving press amp button for 1 second the siren will chirp sharply with turn signals flashing the engine will be immobilized after 10 seconds Press button to stop this function 7 Remote engine stop When the engine is running press 3 button once the engine will be stopped 8 Adjusting the sensitivity of shock sensor In disarming status press and hold button for 5 seconds the turn signals will turn on and enter the shock sensor sensitivity setting mode Press qx button to adjust the shock sensor sensitivity The shock sensor has 5 sensitivity levels level 5 is the highest sensitivity and level 1 is the lowest factory setting is level 4 While selecting sensitivity levels the siren beeps once indicates the sensitivity is level 1 the siren beeps twice indicates for level 2 three times for level 3 and so on Once the suitable sensitivity is set press button to confirm and exit the setting mode If there is no operation within 15 seconds in the sensitivity setting mode the system will return to previous sensitivity setting and exit Motorcycle Alarm System Installation Manual Installation guide ECU installation Wa
Download Pdf Manuals
Related Search