ADJ Gobo Projector IR - Owners Manual
Contents
1. 800 322 6337 Fax 323 582 2941 E mail support americandj com To purchase parts online visit http parts americandj com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution This may cause eye damage Avoid looking directly into the light source Use sensible precaution Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures war ranty In the unlikely event your unit may require service please contact your nearest ADJ dealer PLEASE do not discard the shipping carton in the trash Please recycle when ever possible ADJ Products LLC www adj com Gobo Projector IR User Manual Page 2 General Instructions Gobo Projector IR To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference Gobo Projector IR Features Includes Built In Hanging Yoke e 4 Replaceable Gobo Patterns 3 Metal amp 1 Glass e 4 Colors Gels Red Green Blue amp Yellow e Button on Rear Panel for static or slow rotation the gobo e ADJ UC IR Compatible Sold Separately Gobo Projector IR Warranty Registration The Gobo Projector IR car2. It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service you must obtain a Return Authorization number RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the product only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product ADJ Products LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not
3. 217 x 206 x 121mm Weight 6 3 Lbs 2 9 Kgs Gobos Size 26 8mm Viewable 24mm Fuse 1 Amp Duty Cycle None Warranty Two Year 730 Days Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice ADJ Products LLC www adj com Gobo Projector IR User Manual Page 10 ADJ Products LLC 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info americandj com A D J Supply Europe B V Junostraat 2 f te Mu 6468 EW Kerkrade Netherlands E E EEE service adjgroup eu www adj eu youtube com adjlighting Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On
4. include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect E ADJ Products LLC reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no cir
5. load of 1 amps is reached If the fuse needs replacement please see fuse replacement on page 8 Be sure the local power outlet match the required voltage of the unit Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall To reduce the risk of electrical shock or fire do not expose this unit rain or moisture This unit is intended for indoor use only use of this product out doors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the fixture Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short The fixture should be serviced by qualified service personnel when A The power cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or wat
6. al Page 6 Gobo Projector IR Adding A Color Gel The Gobo Projector IR comes with 4 colored gels These gels can be used at anytime and allows you to add background color to your gobo To add a color gel 1 Unscrew and remove the lens housing 2 Using a flat head screwdriver gently and carefully remove the retainer ring holding the lens into place 3 Remove the lens and insert your desired gel The gel should sit pefectly on the small ledge inside the housing 4 With the gel sitting perfectly reinsert the lens After the lens is inserted reinsert the retainer ring so that it sits snuggly against the lens There should be no play between the lens and retainer ring Gobo Projector IR Photometric Chart LUX 10130 2400 1030 560 366 Distance m 0 1 0 2 0 3 0 4 0 5 0 Diameter m 0 22 0 45 0 67 0 89 1 14 ADJ Products LLC www adj com Gobo Projector IR User Manual Page 7 Gobo Projector IR Fuse Replacement Locate and remove the unit s power cord Once the cord has been removed located the fuse holder located inside the power socket Insert a flat head screw driver into the power socket and gently pry out the fuse holder Remove the bad fuse and replace with a new one The fuse holder has a built in socket for a spare fuse be sure not to confuse the spare fuse with active fuse Gobo Projector IR Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and exter nal optical lenses sho
7. cumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS e Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding LED and lamps e Laser Products 1 Year 365 Days Limited Warranty excluding laser diodes which have a 6 month limited warranty e L ED Products 2 year 730 days Limited Warranty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty batteries which have a 180 day limited war ranty Only the L E D s carry a 2 year warranty excluding StarTec Series which a carries a 1 Year Limited Warranty e ADJ DMX Controllers 2 Year 730 Days Limited Warranty excluding faders and tact switches ADJ Products LLC www adj com Gobo Projector IR User Manual Page 9 Gobo Projector IR Specifications Model Gobo Projector IR LED 1x 12W Colors White Voltage 120v 60HZ 230v 50Hz Power Consumption 14 4W Beam Angle 13 Degrees Dimensions 8 5 L x 8 W x 4 75 H
8. er D The fixture does not appear to operate normally or exhibits a marked change in performance ADJ Products LLC www adj com Gobo Projector IR User Manual Page 4 Gobo Projector IR Operation Introduction The ADJ Gobo Projector IR is a rotating gobo projec tor This fixture is designed for mobile DJ s clubs bands roller rinks and any arena that requires a compact light weight easy to use unit Power Supply Before plugging your unit in be sure the source volt age in your area matches the required voltage for your ADJ Gobo Pro jector IR before attempting operation Operation This fixture is designed to operate as a stand alone rotating gobo projector there is no need of a controller It has been tested and there is no assembly necessary The Gobo Projector IR is ready to be plugged in out of the box Only use the included I E C power cable supplied with the unit When this fixture is plugged in the unit will project the included gobo Using the button located at the back of the unit you can make the gobo remain static or make the gobo rotate counter clockwise After plugging the unit if there is no LED output check the fuse If the fuse has not popped please contact customer support for further instructions This fixture features a light weight case design and an adjustable hanging bracket ADJ Products LLC www adj com Gobo Projector IR User Manual Page 5 Gobo Projector IR ADJ UC IR Control The UC IR so
9. j p 2 gt User Instructions 7 15 2015 ADJ Products LLC all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ADJ Products LLC logo and identifying product names and numbers herein are trademarks of ADJ Products LLC Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ADJ Products LLC brands and product names are trademarks or registered trademarks of their respective companies ADJ Products LLC and all affiliated companies hereby dis claim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe unsufficient and negligent as sembly installation rigging and operation of this product Europe Energy Saving Notice Energy Saving Matters EuP 2009 125 EC Saving electric energy is a key to help protecting the enviroment Please turn off all electrical products when they are not in use To avoid power consumption in idle mode disconnect all electrical equipment from powe
10. ld separately infrared remote gives you control of various functions See below To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away STAND BY Pressing this button will blackout the fixture FULL ON This button is invalid for the fixture FADE GOBO Press this button to run or stop the effect DIMMER and DIMMER Use these buttons to adjust the out put intensity STROBE This button is invalid for the fixture COLOR This button is invalid for the fixture 1 9 These buttons are invalid for this fixture SOUND ON amp OFF These buttons are invalid for this fixture SHOW 0 This button is invalid for this fixture Gobo Projector IR Gobo Replacement The Gobo Projector IR comes with a replaceable gobo This gobo can be interchanged at any time and allows you to customize your system To replace gobo 1 Unscrew the two screws located on the bottom of the unit that hold the gobo housing 2 Remove the gobo housing 3 Once the gobo housing has been removed remove the retaining ring that holds the gobo in This can easily be done using needle nose pliers 4 Remove and replace the gobo with your desired replacement gobo Reinsert the retainer ring and make sure the ring rests firmly against the gobo 5 Slide the gobo assembly back into place and secure the housing with two screws ADJ Products LLC www adj com Gobo Projector IR User Manu
11. r when not in use Thank you Gobo Projector IR Introduction To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference Unpacking Thank you for purchasing the Gobo Projector IR by ADJ Products LLCe Every Gobo Projector IR has been thoroughly tested and has been shipped in perfect operating condition Carefully check the ship ping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for any damage and be sure all equipment necessary to operate the system has arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for fur ther instructions Please do not return the unit to your dealer without first contacting customer support Customer Support ADJ provides a toll free customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or suggestions For service related issue please contact ADJ Products LLCe Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice
12. ries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A num ber The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must pro vide a copy of your proof of purchase invoice You may obtain a R A number by contacting customer support at 800 322 6337 Installation Gobo Projector IR The unit should be mounted using a mounting clamp not provided affixing it to the mounting bracket that is provided with the unit Always ensure that the unit is firmly fixed to avoid vibration and slip ping while operating Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times the unit s weight Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture The equipment must be installed by a professional and it must be installed in a place where it is out of the reach of people s grasp ADJ Products LLC www adj com Gobo Projector IR User Manual Page 3 Gobo Projector IR Precautions Safety Issue This unit may blow the fuse if the maximum allotted
13. uld be carried out periodically to optimize light output Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew In heavy club use we recommend cleaning on a monthly basis Periodic cleaning will ensure longevity and crisp output 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Clean the internal optics with glass cleaner and a soft cloth every 30 60 days 4 Always be sure to dry all parts completely before plugging the unit back in Gobo Projector IR Trouble Shooting Trouble Shooting Listed below are a few common problems that you may encounter with solutions No light output from the unit 1 Be sure you have connected your unit into a matching wall power outlet Be sure the fuse has not popped The fuse is located on the rear panel N ADJ Products LLC www adj com Gobo Projector IR User Manual Page 8 Gobo Projector IR Warranty MANUFACTURER S LIMITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories
Download Pdf Manuals
Related Search