Jeep Wheel Spacers and Adaptors ( CJ, YJ, TJ, JK ) IMPORTANT
Contents
1. Jeep Wheel Spacers and Adaptors CJ YJ TJ JK IMPORTANT Please read all instructions completely before installing wheel spacer or adaptor Part Numbers 11300 Spacer 1 50 Designed for 2007 UP Jeep Vehicles with 5 x 5 bolt pattern 11301 Spacer 1 25 Designed for 1987 2006 Jeep Vehicles with 5 x 4 5 bolt pattern 11302 Spacer 1 25 Designed for 1945 1986 Jeep Vehicles with 5 x 5 5 bolt pattern 11310 Adaptor 1 25 Designed for 1987 2006 Jeep Vehicles with 4 5 lug spacing to 5 5 WARNING All ALLOY USA RUGGED RIDGE wheel spacers adaptors use 1 2 x 20 Lug nuts Kit contents 2 T6 Aluminum spacer or adaptor 10 Grade 8 Wheel Studs pre pressed 10 Lug Nuts WARNING It is very important that all retainer clips be removed before installing spacers or adaptors Surface of rotor or drum must be cleaned All mud dirt rust and or scaling must be removed before spacer or adaptor can be installed Failure to follow instructions may not allow spacer or adaptor to be properly tightened Remove tire using proper procedures called out in the jeep service manual Remove any retainer clips from the mating surface of the drums or rotors Clean wheel studs with a wire brush Apply a quality thread lock to axle wheel studs Place spacer or adaptor onto factory wheel studs Thread supplied lug nuts with tapered end oriented toward spacer or adaptor Tighten lug nuts in a criss cross pattern Set t2. he torque to 85 100 Ft Lbs It will help to have another person holding the brake pedal when tightening Clean and remove any dirt rust or scaling from mating surface of road wheel Reinstall tire to spacer or adaptor with factory lug nuts Tighten to factory specifications WARNING Attach spacer or adaptor using supplied lug nuts only Make sure axle studs clear Spacer or adaptor and allow full engagementof lug nut threads NEVER DOUBLE STACK wheel spacer or adaptors Serious injury or death may occur if warning is ignored Factory Lug Nut mE Wheel Spacer or Adaptor Install to spacer or adaptor stud Supplied Lug Nut Axle flange or Hub flange Install to axel stud
Download Pdf Manuals
Related Search