ASSEMBLY INSTRUCTIONS
Contents
1. ROLAND SANDS DESIGN MENAI Sa Sele ale es 0048 0972 REVISION A 05 07 2014 PAGE RSD SPORTSTER MID CONTROL INSTALLATION RSD SPORTSTER RIGHT MID INSTALLATION Turn your motorcycle off place securely on a lift or side stand 2 Remove the stock right side controls disconnect the brake line from the master cylinder and remove the master cylinder from the controls NOTE Consult your HD service manual for specific instructions 3 Install the mid control backing plate using the supplied spacers and bolts Torque to 90 100 in lbs NOTE Apply high strength thread locking compound to all bolts A B C D 1 4 1 889 Ja 60 spacer is used in place of the 880 spacer if installing the RSD Pulley Cover PRODUCT DESCRIPTION 4 Remove the stock clevis from the master cylinder 2004 2013 XL SPORTSTER RSD MID CONTROLS 0035 1134 NOTE Consult your HD service manual for specific instructions For questions pertaining to the installation of this product please contact the Performance Machine technical department at 1 800 479 4037 This product is manufactured in the USA by Performance Machine LLC J ROLAND SANDS DESIGN 5 Mount the master cylinder and supplied reservoir bracket using the included hardware and spacers Apply high strength thread locking compound to all bolts Remove the three derby cover bolts at 6 8 10 o clock positions 6 Install the new clevis to the master cylinder and m2. ount it to the brake pedal using the supplied hardware Torque to I7 22 ft lbs 2 Install the backing plate using the provided spacers and bolts Torque to 90 100 in Ibs Apply medium strength thread locking compound to all bolts 7 Mount the reservoir to the mount run the hose to the master cylinder and trim to length Install the rear brake line and bleed the rear brake Check clearance between the brake pedal and exhaust system Adjust height if needed Make sure the hose does not bind kink or touch the exhaust system
Download Pdf Manuals
Related Search