Annual Diesel Service Check List
Contents
1. Ensure you have suitable tools onboard Always run your engine a few minutes at idle to warm up before engaging Always run your engine a few minutes at idle before turning off When replacing anodes do not put thread tape on any of the thread fittings apply some grease so that they can be more easily undone next time If when changing your oil it is a milky colour you have water in the oil call Mariner Engineering Look for any metal filings or debris in the oil when changing it If you find any call Mariner Engineering If you note any cracks in your drive belts or hoses change them Keep your fuel tanks full to prevent condensation and if practical drain or siphon from the bottom of the tank once a year to see if there is any water present If there is use a biocide and drain the water Always keep the motor clean so you can see oil or water leaks If your anode is 50 or more gone when you replace it check it more regularly When possible purchase your fuel from a service station with high turn over If in doubt contact Mariner Engineering for advice and parts Mariner Engineering contact number 9397 8200 Please note this is a generic checklist it is the responsibility of the user to ensure that they refer to the engines specific service manual to ensure all items are covered Itis always recommended that a qualified person carry out the service duties2. Mariner Engineering Date Annual Diesel Service Check List Visually inspect engine for Oil Leaks Water leaks Corrosion build up Drive belt condition and tension Hose condition oil amp Fuel Perform the following operations as per the engines maintenance manual Change engine oil Change oil filter Check coolant condition Change Fuel Filters Check replace air filter Replace engine anodes Check clean water inlet strainer Service water pump Check gear oil level Check warning lights and gauges Check battery terminals Check battery fluid and load test Check full throttles at pump Check control unit operation Check cables to and from Control unit Check cables to and from engine gear box JUL Check stuffing box Shaft seal Check sea cock operation Clean engine Run and check for leaks etc Please note this is a generic checklist it is the responsibility of the user to ensure that they refer to the engines specific service manual to ensure all items are covered It is always recommended that a qualified person carry out the service duties Mariner Engineering Date Adjust Tappet clearances Check injector operating pressure and spray pattern Major ServiCe recommended to be Compression test Change gear sail drive oil carried out by Mariner Engineering Tips Always keep a spare water pump impellor onboard Always keep spare drive belts onboard Always keep a spare fuel filter onboard
Download Pdf Manuals
Related Search