1203 - BMI Karts and Supplies
Contents
1. Always slow down while turning High speed turning may cause loss of control possible injury to the Operator Do not race jump and perform stunt riding or spinouts when operating the Fun Kart The Fun Kart is not designed or intended for such operation This manual provides guidelines for the assembly maintenance and operation of this Fun Kart and is not intended as a service manual Assembly maintenance and or repair of this Fun Kart should only be performed by persons of sufficient mechanical skill experience and judgment such as outdoor equipment dealers motorcycle dealer shops or small engine dealers so that no unsafe condition or modification is made Always use extreme caution when starting the engine Avoid touching the engine muffler or drive components These areas could cause burns on contact Operator must always be appropriately supervised at all times while operating this vehicle 31 Riding your Fun Kart requires skill acquired through practice over a period of time Take the time to learn the basic techniques before attempting to ride the vehicle 32 Ride only on safe and familiar terrain Avoid loose gravel and rocks Be careful on wet surfaces and allow for extra braking distance 33 ALWAYS mount the caution flag provided on the Fun Kart for safety purposes This flag could help prevent dangerous situations Pay close attention to all Caution and Warning labels on the Fun Kart2. Fun Karts MODELS 1203 SERIES 30009 OWNERS MANUAL WARNING Read Tecumseh Engine Owner s Manual and Important Rules for Safe Operation before Operating Vehicle DANGER YOU MUST ADD OIL TO THE ENGINE PRIOR TO USE 20 oz or 1 Pints 6 Liters OF SAE 30 MOTOR OIL This vehicle is sold for off road use only Before operating this vehicle read all the instructions for safe assembly and operation as well as the instructions governing the engine and other portions of the vehicle Pay close attention to all caution and warning labels on the Fun Kart For Replacements Parts Call 1 888 926 6554 U S 1 888 707 1880 Canada 06 23 03 01147 Rev D Read These Important Rules For Safe Operation NOTE All the items 1 33 below should be read and understood by the Operator and Parent Failure to follow these instructions could endanger personal safety of the operator and any passenger This vehicle is not licensable IT IS NOT TO BE OPERATED ON ANY PUBLIC ROAD STREET SIDEWALK or ALLEY To do so would be a violation of local law This vehicle may be operated only on private property and upon areas approved by local law This vehicle should NEVER be operated indoors The exhaust from the engine contains carbon monoxide which is tasteless odorless and poisonous gas This Fun Kart is not intended nor designed for racing The operator of this vehicle should always wear a D O T approved helmet and other protective
3. ASSUMPTIONS OF RISK The Owner Or Operator Assumes All The Risks Incident To Or Arising Out Of The Operation Of This Vehicle Failure To Follow And Comply With All Warnings May Cause Serious Injury Or Death YERF DOG Fun Karts by Flexible Flyer LIMITED WARRANTY The Limited Warranty on this vehicle is in two 2 parts We offer the original purchaser of this product the following warranty PART 1 ENGINE Tecumseh warrants the engine for 2 years not Flexible Flyer See Tecumseh Engine Owner s Manual Engine repair replacement parts and warranty claims must be handled through an authorized dealer in your locality Tecumseh has an extensive authorized sales and service dealer network See yellow pages of phone directory under Engine Gas PART 2 FRAME The frame and related components are warranted by Flexible Flyer and are applied to any part found to be defective due to material and or workmanship when inspected at the Flexible Flyer factory Flexible Flyer will at its option repair or replace the defective parts to the original purchaser at no charge The warranty periods are as follows from the date of purchase A Frame for 90 days Void if 1 Frame is broken or bent due to abuse underside scraped abusively 2 Wheels are bent or broken due to impact 3 Spindles are bent due to impact 4 Paint is worn off of rear bumper indicating an extra rider 5 Axles are bent out of ordinary position either horizontally
4. engine should be stopped and the spark plug wire disconnected The vehicle should then be checked for damage Excessive noise or vibration is generally a warning of loose or worn parts When making repairs or adjustments to the vehicle which do not involve adjustments to the engine the spark plug wire must be disconnected and kept away from the spark plug to prevent accidental starting When working on or around or when restarting engine use extreme cautionto avoid contact with the muffler cylinder head or any other potentially hot area on or around the engine Always perform a Pre Ride Inspection before starting the engine See Pre Ride Inspection in the manual The custom brush guard assembled on this vehicle is for deflecting loose vegetation and must not be removed When storing the vehicle it must be kept in a place where gasoline fumes will not reach an open flame or spark For long periods of storage such as for winter the fuel tank should be drained in the open cool area The engine must be allowed to cool before storage in any enclosure Read and keep all printed material supplied with this vehicle Timely and specific instructions and an Operators Manual revisions are included in supplements If any printed material included is unclear please call 1 888 389 5522 for assistance Never operate this vehicle while under the influence of alcohol drugs or medication of any kind Such operation could be dangerous to you and or others
5. of operation check the chain adjustment and readjust it if it has more than 1 2 flex Loosen the engine clamp nuts and slide the engine forward to tighten chain For Replacement Parts Please Call 1 888 926 6554 U S 1 888 707 1880 Canada 10 STEERING WHEEL ASSEMBLY INSTRUCTIONS STEERING WHEEL 414 m 414 20 x 1 3 4 NYLOCK HEX HEAD BOLT NUT STEERING amp STEERING WHEEL SHAFT SHAFT x _ STEERING WHEEL p N PHILLIPS HEAD 3 SCREW 1 4 20 x 1 3 4 HEX HEAD BOLT 11 BRUSH GUARD AND FOAM ASSEMBLY INSTRUCTIONS ITEM 17 ARROWS INDICATE 11 CABLE TIE LOCATIONS AROUND FOAM ON BRUSHGUARDS 14 PLACES STEERING SUPPORT TUBE 2 AND 1 AROUND SAFETY FLAG AND REAR BRUSH GUARD TUBE 12 UP FOR INCREASED STABILITY USING PIECE THAT THE 8 PIECE WAS CUT FROM 64 LEFT CUT IN HALF RESULTING IN 2 32 PIECES CUT 8 PIECE FROM ONE OF THE 72 PIECES OF FOAM INCLUDED IN THE BOX ASSEMBLY DIAGRAM SEE PARTS LIST FOR CORRECT HARDWARE PLACEMENT VERIFICATION 12 MODEL 1203 SERIES REPLACEMENT PARTS IDENTIFICATION Item Part No 1 H93290W 2 2200020 3 H32503W 4 22000900 5 2200040 6 2200030 7 H33135W 8 H33136W 9 H36254W 10 H92130W 11 H92141W 12 H91825W 13 5120017 14 01050 15 02968 16 M01001W 17 M12501W 18 Q41412W 19 H91480W 20 H93262W 21 3100016 22 3100026 23 H91780W 24 Q43
6. 150W 25 M72038W 26 M72038W 27 H91821W 28 H91831W 29 Q33100W 30 HH1256T 31 001203P 32 001205P 33 HH37524 34 HH62518 35 Description BOLT 5 16 18 X 1 50 CARRIAGE BOLT 5 16 18 X 2 00 CARRIAGE BOLT 1 4 20 x 1 75 HEX BOLT 3 8 16 X 2 00 HEX BOLT 5 16 18 X 1 00 HEX BOLT 5 16 18 X 1 50 HEX BOLT 5 16 18 X 1 75 HEX BOLT 5 16 24 X 0 50 HEX BOLT 5 8 18 X 3 75 HEX BRAKE BAND BRAKE DRUM 4 DIA BRAKE ROD RED BRUSHGUARD RED FRONT BRUSHGUARD RED MAIN CABLE ASSEMBLY THROTTLE CABLE TIE 3 1 4 BLACK CABLE TIE BAR LOK 11 CLUTCH CENTRIFICAL COMET COLLAR 7 16 BORE X 7 8 DRIVE CHAIN 40 X66 PITCH DRIVE COVER BRACKET RED DRIVE COVER RED ENGINE MANUAL ENGINE 5 0 HP TECUMSEH FOAM 2 DIA X10 BLACK FOAM 2 DIA X6 BLACK FOOT PEDAL RED LEFT FOOT PEDAL RED RIGHT KILL SWITCH ASSEMBLY NUT 5 16 18 NYLOCK NUT 1 4 20 NYLOCK NUT 3 8 16 NYLOCK NUT 3 8 24 THIN NYLOCK NUT 5 8 18 THIN NYLOCK Item Part No 36 37 38 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 00204 H91470W H92700W 00916 22000300 26000900 H92441W 5120015 H92740W H91950W H55030W H92554W 26000209 26000109 H92560W H91815W 001618P 25000600 001614P H53441W H53132W H56251W 00513 5120302 32010605 00244 00245 00246 Q33101W H92690W 32010505 H61610W 01147 02604 Description SPRING CLIP RETAINING RING 1 4 SAFETY FLAG BOLT 5 16
7. 18 X 2 25 HEX BOLT 3 8 16 X 1 75 HEX SEAT BELT ASSEMBLY SEAT CUSHION SEAT FRAME BLACK SEAT RAIL PAIR SPACER 0 78 ID X0 63 DRIVE SPRING 1 2 X 3 00 COMPRESSION SPROCKET 54 TOOTH TIE ROD ASSEMBLY RIGHT TIE ROD ASSEMBLY LEFT STEERING WHEEL ASSEMBLY 10 THROTTLE ROD RED WASHER 5 16 FLAT WASHER 7 16 FLAT WASHER 3 8 FLAT WASHER 5 16 FENDER WASHER 5 16 INTERNAL TOOTH WASHER 5 8 FLAT NARROW SPINDLE SPACER WELDMENT CHASSIS RED WELDMENT LEFT FRONT SPINDLE WHEEL ASSEMBLY FRONT WHEEL ASSEMBLY REAR WHEEL ASSEMBLY REAR DRIVE WIRE ASSY 16 GA X 65 WIRE CLIP WELDMENT RIGHT FRONT SPINDLE BOLT 3 8 16 X 1 00 OWNERS MANUAL 4 CYCLE ENGINE OIL SAE 30 200z Thank you for purchasing our product Although we go to great effort to ensure the quality of our products occasionally errors or omissions occur Should you find either a defective or missing part in this product please contact us for a replacement part at the following address YERF DOG Fun Karts Attn Customer Service 100 Tubb Ave P O Box 1296 West Point MS 39773 or call us at 1 888 389 5522 In Canada contact Maurice Pincoffs Canada 6050 Don Murie Street Niagara Falls Ontario L2E 6X8 or call 1 888 707 1880 13 Item Part No C0 CO CO IO IO IO IO IO IO IQ IQ IQ IO 2 2 o g RON o MODEL 30009 REPL
8. 1W H53132W H56251W 00513 01146 01142 00244 00245 00246 Description SPRING CLIP RETAINING RING 1 4 SAFETY FLAG SCREW 5 16 18 X2 1 4 RDHD MACH BOLT 3 8 16 X 1 75 SEAT BELT ASSEMBLY SEAT CUSHION SEAT FRAME BLACK SEAT RAIL PAIR SPACER 0 78 ID X0 63 DRIVE SPRING 1 2 X 3 00 COMPRESSION SPROCKET 54 TOOTH TIE ROD ASSEMBLY RIGHT TIE ROD ASSEMBLY LEFT STEERING WHEEL ASSEMBLY 10 THROTTLE ROD BLACK WASHER 5 16 FLAT WASHER 7 16 FLAT WASHER 3 8 FLAT WASHER 5 16 FENDER WASHER 5 16 INTERNAL TOOTH WASHER 5 8 FLAT NARROW SPINDLE SPACER WELDMENT CHASSIS BLACK WELDMENT LEFT FRONT SPINDLE WHEEL ASSEMBLY FRONT WHEEL ASSEMBLY REAR WHEEL ASSEMBLY REAR DRIVE Q33101W WIRE ASSY 16 GA X 65 H92690W 01149 H61610W 01147 02604 WIRE CLIP WELDMENT RIGHT FRONT SPINDLE BOLT 3 8 16 X 1 00 OWNERS MANUAL 4 CYCLE ENGINE OIL SAE 30 20 oz 15 MODELS 1203 SERIES 30009 VEHICLE REGISTRATION AND WARRANTY CONFIRMATION IMPORTANT Please return this information within 10 days of purchase to validate your warranty Return to F F Acquisition Corp YERF DOG Warranty Dept 1743 South Home 100 Mesa AZ 85204 Thank you for purchasing this fine YERF DOG product With proper use maintenance and service this Kart will bring many years of fun and enjoyment Please complete this vehicle registration and warranty confirmation form to ensure protection under the terms and condi
9. ACEMENT PARTS IDENTIFICATION H93290W 2200020 H32503W 22000900 2200040 2200030 H33135W H33136W H36254W H92130W H92141W 01148 00873 00878 H92161W M01001W M12501W Q41412W H91480W H93262W 00875 00876 H91780W Q43150W M72038W M72038W 01143 01144 Q33100W HH1256T 001203P 001205P HH37524 HH62518 Description BOLT 5 16 18 X 1 50 CARRIAGE BOLT 5 16 18 X2 00 CARRIAGE BOLT 1 4 20 x 1 75 HEX BOLT 3 8 16 X 2 00 HEX BOLT 5 16 18 X 1 00 HEX BOLT 5 16 18 X 1 50 HEX BOLT 5 16 18 X 1 75 HEX BOLT 5 16 24 X 0 50 HEX BOLT 5 8 18 X 3 75 HEX BRAKE BAND BRAKE DRUM 4 DIA BRAKE ROD BLACK BRUSHGUARD BLACK FRONT BRUSHGUARD BLACK MAIN CABLE ASSEMBLY THROTTLE CABLE TIE 3 1 4 BLACK CABLE TIE BAR LOK 11 CLUTCH CENTRIFICAL COMET COLLAR 7 16 BORE X 7 8 DRIVE CHAIN 40 X 66 PITCH DRIVE COVER BRACKET BLAC DRIVE COVER BLACK ENGINE MANUAL ENGINE 5 0 HP TECUMSEH FOAM 2 DIA X10 BLACK FOAM 2 DIA X6 BLACK FOOT PEDAL BLACK LEFT FOOT PEDAL BLACK RIGHT KILL SWITCH ASSEMBLY NUT 5 16 18 NYLOCK NUT 1 4 20 NYLOCK NUT 3 8 16 NYLOCK NUT 3 8 24 THIN NYLOCK NUT 5 8 18 THIN NYLOCK 36 37 38 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 59 60 61 62 63 64 65 66 67 68 14 Item Part No 00204 H91470W H92700W 000911P 22000300 26000900 H92441W 5120015 H92740W H91950W H55030W H92554W 26000209 26000109 H92560W 01145 001618P 25000600 001614P H5344
10. d Foam Assembly Instructions page 12 4 Foam Attach Foam to Brush Guard See Brush Guard and Foam Assembly Instructions page 12 5 Bolts Check the screws nuts and bolts on your vehicle to see that all are tightened securely For safe operating conditions do periodic checks and tighten securely 6 Engine Fill the crankcase with oil until it reaches the FULL mark on the dip stick DO NOT fill above the FULL mark Approximately 20 oz or 1 pints 6 Liters of SAE 30 weight oil For additional information refer to Tecumseh engine manual for servicing the engine 7 Fill fuel tank with regular gasoline leaded or unleaded Do not use premium gasoline Do not overfill No fuel in filler neck 8 Tire Pressure CHECK AIR PRESSURE IN TIRES It is common industry practice to overinflate the tires This is done to guarantee an airtight seal Prior to riding the Fun Kart for the first time you may need to reduce the air pressure in the tires to the specifications stated below Rear Tires 20 PSI Front Tires 24 PSI Proper tire pressures will increase the life of the tire and enhance the performance of the Fun Kart Driving on asphalt or concrete will significantly reduce the life of the tire PRE RIDE INSPECTION WARNING Perform this pre ride inspection everyday before riding the vehicle If not performed serious damage to the vehicle and personal injury may result Engine Oil Level Add oil if required C
11. e safely is largely dependent upon the operator s ability to exercise proper judgement An operator also must not be too small or too large for controlled operation The operator must be at least 16 years of age and have understanding mental capacity and physical capability to safely operate this vehicle This vehicle should only be operated after mature supervised instruction and sufficient practice in non congested areas Safe operation includes responsibility for the safety of a passenger This vehicle is designed for one operator and one passenger A passenger on any vehicle must be sufficient age understanding mental capacity and physical capability to act to protect himself herself and wear a D O T approved helmet at all times This kart is not recommended for cumulative weights exceeding 150 pounds The engine should be stopped when the vehicle is not in use Loose clothing long hair or articles worn by any riders must be fully contained or covered to prevent them from possibly being caught in rotating parts of the vehicle or the surrounding environment while riding Failure to obey could endanger the personal safety of the Riders Do not place hands feet or any other part of the body or any clothing near the engine muffler wheels chain and other rotating parts of the vehicle while riding or running the engine Caution must be used in performing required maintenance on or near an operating engine Special caution should be ta
12. ed engine service is easily obtained Check your phone book yellow pages under Engine Gasoline SERVICE INSTRUCTIONS Engine Lubrication You must change the oil in the crankcase after the first two hours of operating your new engine and after each 25 hours of use thereafter That will insure proper lubrication in internal parts and prevent costly repairs due to excessive wear Refer to Engine Maintenance Instructions Kart Lubrication Every two or three hours of use lubricate the following items with several drops of oil steering bearing points brake rod pivot points pedal pivot points steering spindles and steering rod ends Use the same grade of lubricating oil that is used in the engine crankcase Chain Lubrication For the best chain life it should be lubricated with a graphite type of lubricant such as the spray on type which evaporates leaving the graphite on the chain Using oil or grease on the chain in dusty or sandy riding conditions may cause dirt particles to stick to the chain resulting in rapid wear from abrasion Front Wheel Replacement Care must be used when replacing wheels Do not over tighten nuts It is only necessary to tighten the nuts so that the wheel turns freely on the axle with minimum endplay If the wheel does not turn freely the nut is too tight Rear Wheel Replacement Loosen the large locknut in the center of the wheel to remove the rear wheel Chain Adjustment After the first two hours
13. equipment as recommended by state and local laws The operator should also wear face shields or goggles boots gloves and other appropriate protective clothing Unless otherwise specified in this manual all screws nuts and bolts must be kept tight to ensure that the vehicle is in safe operating condition The engine must be kept free of all dirt and other accumulations paying particular attention to throttle linkage area Prevailing Torque type locknuts lose their locking capability with repeated use and require replacement Ensure locknuts are functioning properly 2 10 11 12 13 14 15 16 17 The tire pressure should be checked prior to each use The recommended inflation pressure is the maximum tire pressure which is printed on the tire s sidewall Improper tire pressure may cause instability and may prevent proper braking or steering Modification of this vehicle or removal of any original equipment or safety decals may render the vehicle unsafe or illegal Never remove any chained guard or belt clutch guard These covers are for the riders protection The vehicle should never be started without first checking to see that the throttle is in idle position Do not start engine without verifying proper function of the throttle Never attempt to start this vehicle without having the operator sitting in the proper position to ensure control of the kart The operator s ability to operate this off road vehicl
14. han those performed under full traction and must be done slowly PREVENTIVE MAINTENANCE STORAGE In the event your vehicle is not to be operated for a period in excess of 30 days and at the end of riding season prepare for storage as follows WARNING Do not drain fuel while engine is hot Be sure to move vehicle outside before draining fuel 1 Drain fuel tank and remove all fuel remaining in the tank by using a suction device or by soaking up the fuel with a clean rag or towel Remove all fuel remaining in the carburetor by allowing engine to run out of fuel Do not perform any fuel removal procedure while smoking or near an open flame Dispose of any rags or towels properly 2 Lubricate engine cylinder by removing the spark plug and pouring an ounce of lean lubricating oil through the spark plug hole into the cylinder Crank the engine slowly to spread oil and replace spark plug 3 Do not save or store gasoline over winter Using old gasoline that has deteriorated from storage will cause hard starting and affect engine performance 4 When the vehicle is removed from storage re read the owner s manual perform any assembly required and perform a pre ride inspection See Pre Ride Inspection section of this manual GENERAL Just as your automobile needs professional mechanical maintenance from time to time so does this vehicle Replacement of the spark plug and ignition points is made necessary by normal use Professional air cool
15. heck for leaks Tighten filler cap securely Fuel Level Add fuel if necessary Do not overfill no fuel in filler neck Replace cap tightly Check for leaks Do not mix oil with gas Only refuel when engine is off and cool Brakes Perform a Brake Test Sit in the vehicle with the brake actuated by pressing on the brake pedal Start the engine with the ignition switch on Increase the engine RPM gradually to ensure the brake is effective Do not operate this Fun Kart unless the brake is working properly Tires Check conditions and pressure Drive Chain Check condition tension lubricate as necessary Throttle Check for smooth operation Assure throttle snaps back to idle Also check for frayed cable or damaged cable conduit If either condition exists replace the cable assembly before riding Stop Switch Perform this stop switch test While the engine is running move the steering column remote stop switch to the OFF position If this does not stop the engine move the engine remote switch to the OFF position If the engine is not equipped with an engine remote switch pull the spark plug wire Check to insure that the stop switch wire is attached to the terminal on the engine Do not operate this vehicle with a stop switch that is not functioning properly All Nuts Bolts and Fasteners Check wheels to assure that all axle nuts and lug nuts are tightened properly Check and tighten all other fasteners as nece
16. ken after the engine has been running since the engine and other drive components may be extremely hot Wet slippery rough or steep terrain is potentially dangerous and may result in injury if proper caution is not observed Slow speeds are required to safely operate this vehicle under those conditions The Operator must use mature judgement skill and experience to choose a speed suitable for the terrain and riding conditions The Governor settings for this vehicle s engine must not be tampered with altered or changed The governor is set by the engine manufacturer and limits the maximum speed of the engine and vehicle and protects the engine from damage Excessive speeds are potentially dangerous to the rider and the engine 18 19 20 21 22 23 24 25 26 27 28 29 30 Each time before using this vehicle the fuel supply should be checked The fuel tank should never be filled while the engine is running or while the engine is hot Do not fill tank in closed area such as a garage while smoking or in the vicinity of an open flame Do not overfill the tank Always allow at least inch of space at the top of the tank for expansion Never top off tank Replace cap tightly to prevent spillage of fuel and potential fire hazard After filling tank move the vehicle at least 15 feet away from spot of filling before starting If the vehicle should start making unusual noise or vibrating abnormally the
17. ly pulling the starter rope If engine does not start after two or three pulls of the starter rope wait a few minutes then repeat the above procedures OPERATIONAL SAFETY TIPS TURNING MANUEVERS The new rider must learn to shift his weight and control the throttle to allow the rear tires to negotiate the turn This is the primary technique to be mastered in riding this vehicle Practice turning at slow constant speeds Defer increased speeds until you are confident of your proficiency and are intimately familiar with the terrain Steer in the direction of the turn and lean your body to the inside of the turn in order to maximize front tire traction Use the throttle to maintain posture throughout the turn Incorrect turning techniques may cause the front tires to slide straight ahead without affecting the vehicles direction of travel If this should occur come to a stop then resume the technique outlined above If the front wheels tend to skid in mud sand or snow you may be able to improve control by releasing the throttle and allowing the vehicle to coast through the turn If rear wheel inadvertently skid sideways correct your slide by steering in the direction of the skid if you have room to perform this maneuver safely Avoid braking or accelerating until you have control To avoid skids while traveling on slippery terrain the rider must exercise a high degree of caution Turning maneuvers on slippery terrain are more hazardous t
18. or vertically 6 Non Factory altering of engine or it s components B Bearings and sprocket for 30 days C Clutch for 30 days against breakage of its parts No warranty is applied for wear of clutch shoes or clutch bearings due to service D Throttle cable brake cable brake band chain tires seat shocks fasteners and other components are not warranted because due to normal service they are subject to excessive wear and abuse All Warranties are voided if the vehicle has been altered in any way or is used in racing or competition rented used under abnormal conditions or subject to abuse misuse neglect or improper maintenance Flexible Flyer is not liable for any damage claim or liability claim personal or otherwise resulting from the operation of this vehicle in any way F F Acquisition Corp YERF DOG Warranty Dept 1743 South Horne 100 Mesa AZ 85204 FOR REPLACEMENT PARTS PLEASE CALL 1 888 926 6554 U S 1 888 707 1880 Canada ASSEMBLY 1 Complete the Fun Kart registration and warranty confirmation on the back of this owner s manual and mail in within 10 days of purchase The information is required when ordering parts 2 Steering Wheel Bolt the steering wheel to the anchor plate with fasteners provided in the parts bag provided with the Fun Kart See Steering Wheel Assembly Instructions page 11 3 Brush Guard Bolt the Brush Guard to frame with bolts provided in the parts bag See Brush Guard an
19. ssary Regularly check set screws on sprockets and drum Guards Ensure all protective guards are in place Never remove any chain guard or clutch guard Each of these covers have a protective purpose if removed it could endanger the personal safety of the operator or passenger 10 Steering System Ensure that it turns freely STARTING INSTRUCTIONS NOTE Do not attempt to start or operate this machine without being completely familiar with all controls necessary to operate this vehicle safely Do not start the engine before reading and understanding all the rules warnings and instructions in this manual 1 Before starting the engine the operator should be seated in the Fun Kart If the rider is not seated in the vehicle it should be placed against a stationary object and started 2 Do not start the engine before checking to make sure the throttle assembly is in the idle position Warning Each time prior to starting the engine check throttle assembly to ensure that when the throttle pedal right side is pushed all the way forward the assembly is working smoothly and returns to idle when released Do not operate if pedal and engine throttle linkage fail to return to idle 3 To start a cold engine pump the engine primer 3 times If the engine is hot priming may not be necessary to restart the engine 4 Pull recoil starter rope sharply See Tecumseh engine owner s manual Do not flood the engine by continuous
20. tions of the warranty and to verify ownership of this product To ensure maximum safety while operating your YERF DOG Fun Kart observe the following precautions OPERATE THIS KART OFF ROAD ONLY ADULT SUPERVISION FOR OPERATORS UNDER 16 YEARS OLD WEAR A D O T APPROVED HELMET PROTECTIVE EYE WEAR AND CLOTHING SECURE LONG HAIR AND LOOSE CLOTHING KEEP ARMS LEGS AND FEET INSIDE THE KART DO NOT OPERATE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL To ensure maximum owner satisfaction and understanding of this product you should READ OWNERS MANUAL BEFORE OPERATING KART REVIEW AND FULLY UNDERSTAND THE KART AND ENGINE WARRANTIES INSPECT THE KART UPON DELIVERY SECURE A COMPLETED COPY OF THIS CERTIFICATE FOR YOUR RECORDS In signing this document the purchaser acknowledges that he she understands the warranty limitations safety and maintenance guidelines outlined above and in the owner s manual and therefore agrees that all riders operators will adhere to these specifications Model No Serial No Date of Purchase First Name Initial Last Name Street Address City State Zip Code Home Telephone Number Parent s Signature Please enclose a copy of your proof of purchase
Download Pdf Manuals
Related Search