3. The spider that comes with the kit as a flat piece of steel needs to
Contents
1. V Twin MFG Variable Pressure Clutch VPC For use on 1998 and up Big twins VT No 18 0674 up to 96 with stock clutch spring or 110 with Heavy Duty clutch spring VT No 18 0677 up to 103 with stock clutch spring or 124 with Heavy Duty clutch spring This is a custom application and should only be installed by a knowledgeable amp trained motorcycle technician V Twin Mfg accepts no responsibility for improper installation NOTE Several Harley Davidson and some after market derby covers will not fit using the VPC clutch On 1998 3 hole derby covers using VT No 18 0677 will require grinding on back of derby cover for clearance A template is provided to check fit j m O a ea OW ome fj ele ee i a y Brits L Remove the derby cover and stock 2 The spring plate is now free to be 3 The spider that comes with the kit spring plate Break loose all six removed from the clutch as a flat piece of steel needs to have screws on the spring plate and back NOTE If replacing the diaphragm _ its fingers or tangs bent a little to them out evenly Once they are clear Clutch it will be necessary to conform with the curve of the stock of the spring plate they can be remove the primary cover Refer to diaphragm spring removed with your fingers the service manual on primary cover removal 4 Place the spider inside the clutch 5 Install the VPC onto the pressure 6 Check the movement of each spring with the fin2. gers pointing out plate using the six metric Allen cap weighted arm for freedom of move as shown The spider can be manipu screws and washers supplied in the ment Insure the arms are riding on lated through the slots in the kit the spider fingers diaphragm spring without removal 7 The VPC comes with a replace ment O ring in the kit for the derby cover Some late model big twins use a full circle gasket The full circle gasket center must be cut to allow for clearance as shown Instruction Step 8 is continued on the other side e WARNING Use the template and provided instructions to check for proper clearance 8 Install the derby cover Align this bolt mark to hole of the Derby Cover Cut Line Bottom To check the clearance between the VPC and Derby Cover Cut the Template and Follow along the Cut Line
Download Pdf Manuals
Related Search