VF-ENGINEERING LIMITED PRODUCT WARRANTY
Contents
1. or cog type belt on a supercharger designed to be driven with a serpentine belt Replacement belts for your application are available from VF Engineering iv Air Assist The air assist system on certain Vortech superchargers must be kept free from kinks and leaks Spare parts are available from VF Engineering 25 Computer Chips Use the computer chip provided in your VF Engineering supercharger turbocharger kit The use of an aftermarket chip is not recommended as they would not be calibrated for use with a supercharger turbocharger and can cause detonation VF Engineering supplies a computer chip flash software with each kit which is specifically developed and calibrated to maximize performance to VF Engineering s specifications and hardware specifications 26 Crankcase Ventilation System You must use the system provided in your VF Engineering kit to prevent excessive crank case pressures and possible engine damage We recommend you clean or replace this every 6000 miles 27 Pullies If your supercharger drive belt comes off it may be due to misalignment of the supercharger pulley cause by installation issues or movement of the mounting plate Misalignment can also be caused by over tightening and failure of the supercharger belt For years of trouble free operation when used for street applications we recommend the drive ratios not be changed from the standard specification 28 In case of recurring miss firing or detonation pinging you2. and inspected as per maintenance instructions viii The main serpentine belt supercharger must not be excessively tensioned see belt tensioning instructions ix The Supercharger turbocharger Kit must be maintained according to the minimum service requirements as listed under the maintenance schedule x Acts of God normal wear and tear rust damage damage to vehicle or engine caused by backfire engine failure accident collision xi Improper installation not following installation instructions provided or installation by an unskilled person xii Over speeding the supercharger turbocharger by any method including under drive accessory pulleys or larger crank pulley or over clocking the turbocharger with an Electronic or Mechanical Boost Controller or tampering with the wastegate signal line xiii Damage resulting from entry of foreign particles xiv If the supercharged turbocharged car is driven after an uncorrected fault has been detected xv Any faults irregularities are not advised to your vendor ONE YEAR LIMITED WARRANTY ON PERFORMANCE SOFTWARE i Liability is limited to the original purchase price of the merchandise to the original purchaser only ii All performance software including performance software from Hex Flash is for OFF ROAD USE ONLY Software has not been tested or approved by any federal or local governing agency and are not approved or recommended for street use Understanding the legal requirements or lega
3. before programming with the Hex Flash performance file This enables the user to return their ECU to its original condition VF Engineering is not responsible for maintaining a copy the original read of the ECU xi VF Engineering is not responsible for any losses or damages occurring as a result of the use of performance software nn ___________ VF Engineering 1365 North Dynamics Street Suite E Anaheim CA USA 92806 Tel 714 528 0066 Fax 714 528 0067 Keys Websites www vf engineering com www vf accessories com www hextuning com VF Engineering Inc Terms may change without notice 06 10 03V1 0 lt warranty061003 doc gt lt warranty101909 doc gt lt warranty071412 gt Page 1 VF ENGINEERING PRODUCT LIMITED WARRANTY Subject to all the terms conditions and exclusions set forth in this document VF Engineering Inc provides the following warranties to the original purchaser of certain VF Engineering products For reference purposes you and your mean only the original purchaser of the warranted VF Engineering product YOU MUST ALSO READ OWNERS MANUAL amp PRODUCT INVOICE 5 ONE YEAR LIMITED WARRANTY ON VF ENGINEERING SUPERCHARGER TURBOCHARGER KIT ANCILLARIES AS BELOW i Mounting brackets and hardware ii Supercharger drive pullies and components iii Idler pullies iv Air inlet and discharge systems v Air valves vi GIAC software 6 NINETY DAY LIMITED WARRANTY ON VF ENGINEERING SUPERCHARGER TURBOCHARGER KIT
4. should contact your vendor By following these procedures you will ensure long term durability and reliability from your conversion 29 Clean the supercharger oil inlet fitting every 3 6000 miles When the vehicle is cold remove the oil inlet fitting at the supercharger and clean it thoroughly utilizing high pressure air to blow the orifice clean before reinstallation Do not attempt to remove the screen filter inside the oil feed fitting This oil inlet fitting is designed with a very small orifice which provides a mist of oil directly onto the gears Never use Teflon tape or other sealants on any oil feed line fitting Do not over tighten fittings 30 Do not use engine oil additives as they may contain solid particulates which can clog the supercharger turbocharger feed line where applicable MAINTENANCE OF YOUR SUPERCHARGED VEHICLE 31 Before supercharging your vehicle we recommend you service and inspect your vehicle Ideally the fault codes should be reset This would highlight any existing conditions that may need attention The condition of consumables such as oil filters spark plugs HT plug wires leads ignition coil and air mass sensor should be inspected and replaced where needed 32 Never operate your engine at full throttle when the engine is cold When starting the engine each day always allow plenty of time for the oil to reach full operating temperature before running above 2500 RPM Full operating temperature is generally ach
5. ANCILLARIES AS BELOW i Air filters ii Oil feed and oil drain components ii Serpentine belts v Injectors regulators and fuel components WARRANTY COVER FOR THE SUPERCHARGER TURBOCHARGER KIT IS EXCLUDED BUT NOT LIMITED TO THE FOLLOWING CONDITIONS 7 VF Engineering does not provide any warranty to You for damages to and or failure of any non VF Engineering component or equipment on a vehicle including but not limited to the engine electrical systems transmission and differentials 8 The warranties do not protect You from Acts of God normal wear and tear or damage to a vehicle or engine caused by backfire collision and or engine failure 9 These warranties do not cover any costs incurred for towing or downtime of the vehicle any labour costs to diagnose problems to remove or replace the VF Engineering products or any damage caused by the use of another company s fittings or pullies 10 The following non VF Engineering occurrences uses and modifications are considered misuse of the VF Engineering product and invalidate all Your VF Engineering Warranties including but not limited to i Any disassembly or attempted disassembly of any VF Engineering assembled parts ii Any disassembly or attempted disassembly of the supercharger turbocharger cartridge hotside coldside volute gearcase or other components ii Damage resulting from ingestion of debris by the supercharger turbocharger iv Improper supercharger turbocharge
6. ARRANTY Subject to all the terms conditions and exclusions set forth in this document VF Engineering Inc provides the following warranties to the original purchaser of certain VF Engineering products For reference purposes you and your mean only the original purchaser of the warranted VF Engineering product YOU MUST ALSO READ OWNERS MANUAL amp PRODUCT INVOICE full throttle and car modifications of any kind that facilitate aggressive driving may reduce the useful life of the car and or any of its wearable parts Improving the performance of an engine by altering the engine s computer software may cause the engine to work harder and could result in damage to the car The user assumes these risks REMEDIES 15 Your sole remedy for the above warranties is the repair or replacement of the defective product only at VF Engineering s discretion 16 WARRANTY CLAIM PROCEDURE i If a VF Engineering product is within the warranty period and You wish to make a claim please follow the procedure as follows ii Contact VF Engineering on 1 714 528 0066 asking for the service department and have the following information available iii Supercharger turbocharger serial number iv Copy of original invoice on which the product was purchased must be dated and show retail store name v Year make model vehicle mileage and engine specifications of the vehicle vi Number of miles on the VF Engineering product and vii Per
7. T and SUPERCHARGER TURBOCHARGER UNIT Caring for your kit mandatory procedures 23 After fitting the new supercharger turbocharger kit should be allowed to bed in for a run in period of 300 miles during which the engine should not be driven over 4500 rpm 24 The supercharger turbocharger kit should be routinely inspected and maintained as below i Air filters Use the air filter system provided in your VF Engineering system ii Air Intake Air Discharge Must be in good condition and properly secured If equipped with flex hose this must be free of damage leaks VF Engineering 1365 North Dynamics Street Suite E Anaheim CA USA 92806 Tel 714 528 0066 Fax 714 528 0067 Keys Websites www vf engineering com www vf accessories com www hextuning com VF Engineering Inc Terms may change without notice 06 10 03V1 0 lt warranty061003 doc gt lt warranty101909 doc gt lt warranty071412 gt Page 3 VF ENGINEERING PRODUCT LIMITED WARRANTY Subject to all the terms conditions and exclusions set forth in this document VF Engineering Inc provides the following warranties to the original purchaser of certain VF Engineering products For reference purposes you and your mean only the original purchaser of the warranted VF Engineering product YOU MUST ALSO READ OWNERS MANUAL amp PRODUCT INVOICE iii Belt Tension Excessive belt tension can lead to supercharger or crankshaft bearing failure Do not use a non slipping
8. VF ENGINEERING PRODUCT LIMITED WARRANTY Subject to all the terms conditions and exclusions set forth in this document VF Engineering Inc provides the following warranties to the original purchaser of certain VF Engineering products For reference purposes you and your mean only the original purchaser of the warranted VF Engineering product YOU MUST ALSO READ OWNERS MANUAL amp PRODUCT INVOICE Software Supercharger Turbocharger are Products Hex Flash refers to the software tuning Product manufactured by Hex Tuning Supercharger refers to the Vortech Supercharger V Series unit Product manufactured by Vortech Engineering Inc The turbocharger unit refers to the GT28 or GT35 series unit Product manufactured by Garrett Turbos Honeywell Each manufacturer is the ultimate manufacturer of each Product The warranty for the Product is underwritten by the ultimate manufacturer and VF Engineering forwards Product warranty queries directly to the respective Product manufacturer or representative VF Engineering does not open or repair either brands of unit All manufacturers terms available upon request from them directly or from VF Engineering If you complete and return the Warranty Registration Form for the Supercharger or Turbocharger along with a copy of Your original receipt within thirty days of Your purchase of a VF Engineering supercharger turbocharger kit the compressor unit manufacturer warrants to you that the supercharger or tu
9. ceived problem 17 VF Engineering will then offer suggestions to help you in troubleshooting or will issue a return authorization R A number to return the product for warranty evaluation 18 If you have been issued an R A number you must safety package each product which means You must place the product s within a shipping box strong enough to hold the weight of the product s and to maintain its shape during shipping with adequate packing material so that the product s will not hit other product s component s or the side of the box during shipping You want to use a professional company Clearly mark the R A number in large approximately 2 alphanumeric characters in two locations on the outside of the box with a bold marker Returned items in transit remain the responsibility until signed for by a member of VF Engineering shipping dept 19 INCLUDE IN THE SHIPPING BOX THE FOLLOWING ITEMS i Serial number if applicable ii Copy of original invoice on which the product was purchased must be dated and show retail store name iii Year make model vehicle mileage and engine specifications of the vehicle iv Number of miles on the VF Engineering product and v Perceived problem vi A copy of the original Three Year Warranty Registration if applicable vii Return authorization number and viii Address to which the product is to be shipped after inspection 20 Ship the properly safety packaged and marked box via UPS or oth
10. ean only the original purchaser of the warranted VF Engineering product YOU MUST ALSO READ OWNERS MANUAL amp PRODUCT INVOICE PRODUCT REGISTRATION FOR WARRANTY ON KITS ONLY THIS DOCUMENT MUST BE RETURNED COMPLETED TO VALIDATE WARRANTY Please retain a copy for your records 1 YEAR WARRANTY Complete and mail form to VF ENGINEERING 1365 N DYNAMICS STREET SUITE E ANAHEIM CA 92806 USA www vf engineering com SUPERCHARGER TURBOCHARGER SERIAL see tag on supercharger turbocharger unit PRODUCT PURCHASE DATE also warranty start date CUSTOMER NAME CUSTOMER ADDRESS CUSTOMER TEL Name of dealer outlet where you purchased your VF Eng product Did you install the supercharger turbocharger system yourself Yes No VEHICLE KIT FITTED TO MAKE MODEL YEAR MILEAGE OF VEHICLE CUSTOMER COMMENTS ey VF Engineering 1365 North Dynamics Street Suite E Anaheim CA USA 92806 Tel 714 528 0066 Fax 714 528 0067 Keys Websites www vf engineering com www vf accessories com www hextuning com VF Engineering Inc Terms may change without notice 06 10 03V1 0 lt warranty061003 doc gt lt warranty101909 doc gt lt warranty071412 gt Page 5
11. er carrier prepaid and insured for the retail value of the product being returned to VF Engineering Service department 1365 North Dynamics Street Suite E Anaheim CA 92806 USA R A number 21 If a VF Engineering warranty applies Your product will be repaired or replaced at VF Engineering s option and returned to you freight prepaid excluding any international shipping taxes tariffs customs and or duties etc which must be paid by You via UPS Fedex DHL ground service If a VF Engineering Limited Warranty does not apply we will advise you of the specific reason for denial and explain to You the costs involved in repair or replacement of your product After relaying this information we will at your option either proceed with the repairs as quoted or return Your products s to you in the condition it they are in at the time of inspection of the warranty evaluation by VF Engineering Timing is not of the essence in delivery or turn around If the warranty does not apply and you do not want VF Engineering to repair or replace your product You will be charged the disassembly and inspection charges for the product and return shipping with insurance by means of UPS COD 22 This warranty cannot be amended orally or in writing by any VF Engineering employee representative or agent and any promises inconsistent with this warranty are void and unenforceable against VF Engineering MAINTENANCE INSTRUCTIONS FOR THE SUPERCHARGER TURBOCHARGER KI
12. ieved only after the engine water temperature has reached the normal indicated operating range for 2 3 minutes 33 Always utilize the highest octane super premium unleaded fuel available in your area Where possible try to use the same brand of fuel Where possible do not use fuels sold at low cost service stations and preferably use national brands whenever possible 34 After filling up with fuel from a source other than the one you use regularly carefully listen for engine detonation If any detonation is audible you may have a fuel problem Cease utilizing heavy throttle and drive with greater care until the fuel is consumed If detonation is still evident inspect for other causes such as i Faulty fuel pump s Check fuel pressure when detonation is occurring ii Dirty injector s clogged fuel filter or pinched fuel line iii Faulty spark plug s or spark plug wires with too much resistance Consult your factory vehicle service manual Most wires should not exceed 10 Ohms of resistance iv Faulty ignition coil distributor Ask VF Engineering for diagnostic info specific to your vehicle v Cooling system not functioning properly Check for a faulty thermostat faulty or improper calibration of the thermostatic fan switch water pump belt slippage a plugged radiator or bad fan clutch vi Dirty air filter cleaner 35 Ensure the spark plug gap is correct for a supercharged application 36 We recommend using manufacturer rec
13. l limitations regarding the use of this product is the sole responsibility of the user iii It is the users responsibility to ensure their vehicle is operating in good condition before installing Hex Flash and not to install it if they have any doubt iv Pre existing functional issues will not be resolved by installing Hex v Improving the performance of an engine by altering the engine s computer software may cause the engine to work harder and could result in premature wear of ignition components and or cause damage to the car The user assumes these risks VF Engineering Hex Tuning is not responsible for damage to a car of this kind vi Hex Flash is tested on stock vehicles It is not tested to work in compatibility with other modifications or products vii All performance data quoted was obtained by testing a group of test cars in specific conditions on specific measuring equipment No guarantee is given that all cars will produce the same results viii Performance software is dependent upon the use of a minimum 91 octane rated fuel Use of inferior fuels will cause detonation and possible engine damage or failure Vehicles should not be driven with the occurrence of a check engine light or other issues ix It is not the responsibility of Hex Tuning or VF Engineering to correct compatibility or operational issues arising from the use of Hex Flash x Users of performance software are strongly recommended to perform a full read of their ECU
14. ommended service components or taking the advice from our dealers specializing in the different makes of cars 37 Spark Plugs need to be changed at intervals of 8 10 000 miles or sooner Eg for Volkswagen models in hot countries we recommend Bosch F6DTC copper electrode plugs 38 Spark plug leads wires must be checked for condition When reaching the end of their life they become hard and must be replaced as a complete set Check the condition of your coil pack and test for resistance according to OE spec Check the condition of the distributor cap where applicable and replace if worn or heavily corroded Replace rotor every 15 000 miles and cap every 50 000 or as condition warrant 39 Engine oil should be changed every 3 5 000 miles We recommend OE oil Do not mix different grades of oil qualities nn _________ __ VF Engineering 1365 North Dynamics Street Suite E Anaheim CA USA 92806 Tel 714 528 0066 Fax 714 528 0067 Keys Websites www vf engineering com www vf accessories com www hextuning com VF Engineering Inc Terms may change without notice 06 10 03V1 0 lt warranty061003 doc gt lt warranty101909 doc gt lt warranty071412 gt Page 4 VF ENGINEERING PRODUCT LIMITED WARRANTY Subject to all the terms conditions and exclusions set forth in this document VF Engineering Inc provides the following warranties to the original purchaser of certain VF Engineering products For reference purposes you and your m
15. r installation v Improper drive pulley belt combination on supercharger vi Excess belt tension on the supercharger belt drive vii Over speeding the supercharger turbocharger by any method including under drive accessory pulleys or larger crank pulley or tampering with the wastegate signal line or use of electronic or mechanical boost controller viii Restricted or blocked supercharger turbocharger air intake resulting in excessive negative pressure at the air inlet ix Free revving of the engine with the drive belt driving the supercharger turbocharger in place x Incomplete fitment of all the parts supplied in the VF Engineering kit xi Restricted or lack of oil supply to the supercharger turbocharger xii Improper installation of or blocked or restricted oil drain line xiii Excessive engine crankcase pressures xiv Dirty or contaminated engine oil xv Removing or defacing the original Vortech Honeywell serial number tag xvi Improper installation not following installation instructions provided or installation by an unskilled person xvii If the supercharged car is driven after an uncorrected fault has been detected or xviii Any faults irregular noises are not advised to your vendor 11 Power increases with Zurich Engineering Inc Supercharger turbocharger Kits are based on unmodified engines and quoted from results obtained from dynamometer tests using the Dynojet 248C and no guarantee is given that every car will achieve the same
16. rbocharger in the kit will be free from defects in materials and or workmanship in accordance with the Vortech Engineering Inc Warranties Program effective March 1 2000 or Honeywell HTT Products Rev 2008 02 29 terms and conditions The balance of the kit will be free from defects in materials and or workmanship for one year 90 days as specified in sections 4 5 from the date of your purchase of the kit If you do not return the Warranty Registration Form and proof of purchase within thirty days then VF Engineering warrants that the supercharger turbocharger in the kit will be free from defects in materials and or workmanship for a maximum of one year from the date of purchase of your kit REQUIREMENTS AND EXCLUSIONS i You must be the original purchaser ii The supercharger turbocharger must NOT be modified disassembled tampered in any way iii The supercharger drive pulley must not be changed and the original pulley seal must remain intact iv The original Vortech Honeywell serial number tag must not be removed altered or replaced v You must change the engine oil and oil filter at least every 3 5000 miles using a SH rated oil or synthetic lubricant regardless of the vehicle filter or oil manufacturers recommendations of oil change intervals vi You must remove inspect and clean the oil inlet fitting oil feed nozzle to the supercharger every 3000 miles vii The conversion must be allowed to break in for a period of 300 miles
17. results as pre existing conditions may affect results EXTENT OF WARRANTY ADDITIONAL EXCLUSIONS AND LIMITATIONS 12 The duration of any and all warranties is limited to the duration of this express warranty All incidental and consequential damages are hereby excluded Some US states do not allow limitations on how long an implied warranty lasts or exclusion or limitations of incidental or consequential damages so the above limitations or exclusions may not apply to You This warranty gives You specific legal rights and You may have other rights that vary from state to state USA only 13 No warranties of merchantability of fitness for particular purpose or affirmation of fact of the warranty expressed or implied other than any available manufacturer s warranties are extended or granted by VF Engineering DISCLAIMER 14 Motor racing is extremely hazardous and death may occur VF Engineering products have no warranty or representations made with ability to protect against injury or death Motor racing aggressive driving including driving for any period of time at SS VF Engineering 1365 North Dynamics Street Suite E Anaheim CA USA 92806 Tel 714 528 0066 Fax 714 528 0067 Keys Websites www vf engineering com www vf accessories com www hextuning com VF Engineering Inc Terms may change without notice 06 10 03V1 0 lt warranty061003 doc gt lt warranty101909 doc gt lt warranty071412 gt Page 2 VF ENGINEERING PRODUCT LIMITED W
Download Pdf Manuals
Related Search