Instruction Manual for Kick Starter Arm
Contents
1. N Instruction Manual for Kick Starter Arm Item No O0 O0 0 0O 0 000 Chrome HOU OU U0UU Black Applicable model names and the frame Nos Monkey Gorilla Z50J 130001 7 AB27 1000001 Monkey FI AB27 1900001 O Thank you for purchasing one of our TAKEGAWA products Please strictly follow the instructions in installing and using the kit Before installing the kit please be sure to check the kit contents Should you have any questions about the kit please contact your local TAKEGAWA dealer Please note Illustrations and photos may vary from actual hardware Please read the following instructions before installation We do not take any responsibility for any accident or damage whatsoever arising from the use of the products not in conformity with the instructions in the manual You are kindly requested not to contact us about the combination of our products with other manufacturers This product is designed for exclusive use in the above mentioned types of motorcycles and frame numbers only Please take note that this product cannot be mounted on other types of motorcycles For the proper use of this product read carefully the Precautions to take when kick starting on the next page Otherwise you may get injured AN CAUTION The following show the envisioned possibility of injuries to human bodies and property damage as a result of disregarding the following cautions O Do th2. parts However if it interferes with something fix the included cushion at the interfering portion Torque for a socket cap screw 12 7 N m 1 3 kgf m Precautions to take when kick starting Step on the kick starter arm as if stepping down on it from the rear side of the motorcycle to the front Be careful in pushing down on the starter arm because depending on where to kick it down the hardest the starter arm may fold up Causing injuries or damaging other parts Bad example Pushing down in this direction NOTE that the arm is most likely to fold up when you press down on it hard towards the TAKEGAWA logo Good example Press down hard and forward through SPECIAL PARTS WN4SeV WZA Co Ltd 3 5 16 Nishikiorihigashi Tondabayashi Osaka Japan TEL 81 721 25 1357 FAX 81 721 24 5059 URL http www takegawa co p aos Mar 17 10
3. e installation with right tools Otherwise breakage of parts or injuries to you may take place Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque Otherwise these parts may get damaged or fall off resulting in accidents As some products and frames have sharp edges or protruding portions please work with your hands protected Otherwise you will suffer injuries O Before riding always check every hardware like screws for slack If you find slack ones screw them securely up to the specified torque Otherwise improper tightening may cause parts to come off Be careful in pressing down on the kick starter arm Otherwise you may get injured O Never install this arm on a motorcycle fitted with a racing inner rotor Otherwise the kick starter arm may get damaged or you may get injured O Never use this arm on any other motorcycles than those specified above Otherwise such use could cause technical troubles For the proper use of this product read carefully the Precautions to take when kick starting on the next page Otherwise you may get injured or parts may get damaged The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the following warnings When you notice something abnormal with your motorcycle while riding immediately stop riding and park your motorcyle in a safe place to check what has gon
4. e wrong Otherwise the abnormality could lead to accidents Before doing work make sure your motorcycle is secure on level ground for safety s sake Otherwise your motorcycle could overturn and injure you while you are working O Check or carry out maintenance of your motorcycle correctly according to the procedures in the instruction manual or service manual Improper checking or maintenance could lead to accidents If you find damaged parts when checking and performing maintenance of your motorcycle do not use these parts any longer and replace them with new ones The continued use of these damaged parts as they are could lead to accidents O NEVER use a damaged kick starter arm and replace it with a new one Otherwise the kick starter arm may get broken causing injuries to you Please be informed that mainly because of improvement in performance design changes and cost increase the product specifications and prices are subject to change without prior notice This manual should be retained for future reference Kit Contents No Parts Name Oy 2 Socket cap screw 6 x 20 Torque for a socket cap screw 12 7 NU m 1 3 kgf m WE Nar 17 10 Precautions to take when installing and handling this product The location of the kick starter arm varies depending on the clutch cover shape Install the arm at the place where it does not interfere with the said
Download Pdf Manuals
Related Search