Manual - Northern Tool + Equipment
Contents
1. 6 Verify the vehicle is secure before working on around or under Lowering load Be sure that all tools and personnel are clear before lowering load 1 Using a suitable jack raise vehicle clear of stands 2 Carefully remove jack stands and lower vehicle with lift device MAINTENANCE Periodically inspect each stand Ensure all parts move freely Do not apply oil or grease to any portion of this product Do not allow dirt to accumulate on Air Spring If rust appears sand affected area and cover with a suitable utility paint Storage Store stands in upright position and in a clean dry area REPLACEMENT PARTS Not all components of the jack are replacement items but are illustrated as a convenient reference of location and position in the assembly sequence When ordering parts please give the Model number part number and parts description Call or write for current pricing SFA Companies 10939 N Pomona Ave Kansas City MO 64153 U S A E Mail sales omegalift com Tel 888 332 6419 Fax 816 891 6599 Omega Website http www omegalift com Replacement Parts List For 32066 amp 32126 Figure 2 Replacement Parts Illustration for Models 32066 amp 32126 model 32126 shown 320663 Spring amp Roll PinAssemby 1 82126 3 Spring 1 ONE YEAR LIMITED WARRANTY For a period of one 1 year from date of purchase SFA Companies will repair or replace at its option without charge any of2. avoid inadvertent removal of the Ratchet Bar from the collar Reinstall the Locking Pin when transporting the jack stands OPERATION Supporting Load Use only to support areas of the vehicle as specified by the vehicle manufacturer Use only on vehicles whose support points are compatible with the saddle of the jack stand Incompatibility or improper placement may result in structural damage to the vehicle and or jack stand Structural damage to either may result in sudden and unexpected loss of load height Do not use attachments and or adapters with this product 1 Inspect your stands before each use If any part is missing or damaged do not attempt to use the jack stands and Contact Omega Technical Service 2 Raise the locking handle and manually adjust the ratchet bar to allow placement under vehicle 3 After raising vehicle carefully position the jack stands so that the load will be centered on the ratchet bar saddle Raise the locking handle until the ratchet bar saddle engages the load Jack stands should be at same height 4 The Locking Handles on your Omega MagicLift Jack Stands are spring loaded to help secure the Ratchet Bar in desired position After adjusting the jack stand release the Locking Handle and pull down on the Ratchet Bar to confirm the pawl and ratchet are engaged The bar should maintain height 5 Slowly lower the vehicle onto the stands while monitoring load distribution and jack stand height
3. Operating Instructions Parts Manual OMEGA NO MagicLift Jack Stands Model Capacity per pair 32066 6 Ton 32126 12 Ton CrP 5 Model 32066 Model 32126 Patent Pending This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death e Leer comprender y seguir las instrucci nes antes To avoid crushing and related injuries de utilizar el aparato gt e NEVER work on under or around a e El manual de instrucci nes y la informaci n de seguridad deben estar comunicado en lengua del Dm ee ee operador antes del uso stands e No seguir estas indicaci nes puede causar da os personales o materiales SFA Companies http www omegalift com Read this manual and follow all the Safety Rules and Operating Instructions before using this product 32066 M2 rev 03 10 SAFETY AND GENERAL INFORMATION Save these instructions For your safety read understand and follow the information provided with and on this pair of jack stands before using The owner and operator of this equipment shall have an understanding of the jack stands and safe operating procedures before attempting to use The owner and operator shall be aware that use of this product may require special skills and knowledge Instructions and safety information shall be conveyed in the operator s native language before use of these jack
4. S Capacity per pair Min Height Max Height 32066 11 x 9 3 4 15 3 4 24 3 8 32126 14 3 4 x 12 3 4 19 3 4 30 1 4 Ratchet Bar Collar Qe RatchetBar P Locking Pin Locking Handle a gt a Locking Pawl Air Spring Base Frame Figure 1 Models 32066 amp 32126 Components model 32126 shown 2 Study understand and follow all instructions provided with and on this device before use Rated capacity is PER PAIR DO NOT exceed rated capacity Use as a matched pair to support one end of a vehicle only Use only ONE 1 PAIR per vehicle Use only on hard level surface Properly secure vehicle before using jack stands Center load on ratchet bar saddle Jack stands are not to be used to simultaneously support both ends or one side of a vehicle No alterations shall be made to this device Failure to heed these markings may result in personal injury and or property damage PREPARATION 1 Verify the product and your application are compatible If in doubt contact Omega Technical Service 888 332 6419 2 Read this manual completely examine the jack stands and familiarize yourself with the components Recognize the hazards associated with its improper use before using the product 3 Refer to the vehicle owner s or service manual for location of proper lift and support points 4 Remove the Ratchet Bar Locking Pin to release the Ratchet Bar The purpose of the Locking Pin is to
5. ecific legal rights and you may also have other rights which vary from state to state SFA Companies 10939 N Pomona Ave Kansas City MO 64153 e OMEGA 888 332 6419 sales omegalift com
6. its products which fails due to a defect in material or workmanship under normal usage This limited warranty is a consumer s exclusive remedy Performance of any obligation under this warranty may be obtained by returning the warranted product freight prepaid to SFA Companies Warranty Service Department 10939 N Pomona Ave Kansas City MO 64153 Except where such limitations and exclusions are specifically prohibited by applicable law 1 THE CONSUMER S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE 2 SFA Companies SHALL NOT BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER 3 ANY IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO ONE YEAR OTHERWISE THE REPAIR REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED 4 ANY MODIFICATION ALTERATION ABUSE UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you sp
7. stands is authorized If any doubt exists as to the safe and proper use of these jack stands remove from service immediately Inspect before each use Do not use if broken bent cracked or damaged parts including labels are noted Any jack stand that appears damaged in any way operates abnormally or is missing parts shall be removed from service immediately If you suspect that the jack stand was subjected to a shock load a load dropped suddenly unexpectedly upon it immediately discontinue use until the stand has been checked by a factory authorized service center contact distributor or manufacturer for list of Authorized Service Centers It is recommended that an annual inspection be done by qualified personnel Labels and owner s manuals are available from manufacturer PRODUCT DESCRIPTION Omega MagicLift Jack Stands are designed to support rated capacity partial vehicle loads consisting of one end of a vehicle Your Omega Jack Stands have a special Magic Lift feature which allows the ratchet bar to automatically adjust to the correct height Use as a matched pair to support one end of a vehicle only NEVER use automotive jack stands to support both ends or one side of a vehicle Use only one 1 pair per vehicle Rated capacity is per pair only The Magic Lift adjustment function of this jack stand is not designed to support a load The Locking Pawl must be properly engaged for the jack stand to support weight SPECIFICATION
Download Pdf Manuals
Related Search