Service Manual
Contents
1. SS 11 SERVICE SPECIFICATIONS OPERATION SETTINGS WHEN INSTALLING REMOVING AND REPLACING PARTS OPERATION SETTINGS WHEN INSTALLING REMOVING AND REPLACING PARTS SERVICE 1 Replacement Work Replacement Part Automatic transmission assembly Valve body assembly Engine assembly Transmission wire Required Work Automatic transmis sion learned value ini tialization Non compliant Behavior Non working Functions Remarks Transmission harsh engage ment Yaw rate sensor Acquire yaw rate sen sor and G sensor and master cylinder pres sure sensor zero point Slip indicator light comes on e Buzzer sounds e VSC control prohibition or erroneous operation Actuator assembly equipped in skid control ECU Acquire yaw rate sen sor and G sensor and master cylinder pres sure sensor zero point Slip indicator light comes on e Buzzer sounds e VSC control prohibition or erroneous operation Master cylinder pressure sensor Acquire yaw rate sen sor and G sensor and master cylinder pres sure sensor zero point Slip indicator light comes on e Buzzer sounds e VSC control prohibition or erroneous operation Immobiliser code computer ID code box Identification code registration see the manual for registra tion method e Wireless functions Engine start Power window master switch assem bly Power window regulator assembly driver seat Front door win2. close the doors or shake the vehicle during the operation Also do not start the engine to avoid idling vibration ACTIVATE SENSOR ZERO POINT ACQUISITION MODE a b 1 2 Stop the vehicle on a level surface Turn the ignition switch to the ON position and press the TRC OFF switch to activate the sensor zero point acquisi tion mode HINT The slip indicator turns on and a buzzer will sound at the same time Acquire zero point for yaw rate sensor and master cylinder pressure sensor 1 Leave the vehicle stationary and release the brake pedal for 1 second or more HINT When the zero point of the master cylinder pressure sensor is successfully acquired only the buzzer will turn off When the zero point of each sensor is acquired the zero point acquisition mode ends and the slip indicator turns off HINT e If wheel speed is detected the acquire zero point mode will be canceled and the slip indicator light will go out e If the TRC OFF switch is handled during the acquire zero point mode the slip indicator light will go out and the acquire zero point mode will be cancelled Turning off the ignition switch will cancel the acquire zero point mode as well e Pressing the TRC OFF switch again will restart the acquire zero point mode However the zero point acqui sition mode will not be performed for the items which have been completed e If malfunction items are detected the acquire zero point mode is
3. dow regulator driver seat motor Initialization of power window system e Automatic opening and clos ing function of the door win dow Jam protection function e Remote operation of each seat with the driver seat switch e Settings are required for the driver seat master switch 2 AUTOMATIC TRANSMISSION LEARNED VALUE INITIALIZATION NOTICE Wait at least 1 minute after connecting the battery terminal before performing the initialization of the automatic transmis sion learned values HINT Learned values will not be initialized erased by simply disconnecting the negative terminal of the battery a After confirming that the shift position is in the P range connect the DS II to the DLC and turn the ignition switch ON and the DS II power ON NOTICE Do not start the engine Conduct AT learned value initialization 1 To initialize learned values follow the DS II screen display select MAIN MENU OPERATION SUPPORT gt OPERA TION SUPPORT CLASSIFICATION A T gt AT LEARNED SS 12 SERVICE SPECIFICATIONS OPERATION SETTINGS WHEN INSTALLING REMOVING AND REPLACING PARTS VALUE INITIALIZATION and run AT LEARNED VALUE INITIALIZATION HINT Initialization will complete in about 1 minute ACQUIRE YAW RATE SENSOR AND G SENSOR AND MASTER CYLINDER PRESSURE SENSOR ZERO POINT NOTICE Always measure the zero point on a level surface incline of less than 1 Do not open or
4. terminated due to handling of the TRC OFF switch and the applicable items cannot be reexamined without restarting the acquire zero point mode TO NEXT SECTION
Download Pdf Manuals
Related Search