Home

Stainless Steel Lift Table Service Manual - Lift

image

Contents

1. or supervision immediately voids any warranties specified in this proposal In the event Purchaser believes it is entitled to make a warranty claim hereunder Purchaser shall notify Seller and Purchaser and Seller shall mutually determine the nature and extent of the claim and the location at which rework or replacement if any shall be performed Seller shall have no responsibility for costs incurred by Purchaser in making preparations for rework or replacement DISCLAIMER OF WARRANTIES THE FOREGOING WARRANTY EXPRESSIONS ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND EXISTENCE OF ANY SUCH OTHER WARRANTY IS HEREBY DENIED Limitations of liability and remedies The liability of Seller for breach of any warranty obligation hereunder is limited to 1 the repair or replacement of the equipment on which the liability is based or II at Seller s option the refund to Buyer of the amount paid by Buyer to Seller for said equipment All other liability of Seller with respect to this Agreement or from the manufacture installation maintenance repair or use of any equipment covered by or furnished under this Agreement whether in contract or in tort or otherwise is limited to the amount paid by Buyer to Seller pursuant to the terms here on SELLER SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHAT SO EVER THE REMEDIES S
2. ET FORTH ARE EXCLUSIVE Breach Any breach by Seller with respect to any items or unit of equipment shall be deemed a breach with respect to that item or unit only Infringement Seller will not be liable for the infringement of any patent by the Buyer s use of any equipment or materials delivered here under LIFT PRODUCTS SXT LIFT SPECIFICATIONS 42 x 48 towered Height INTRODUCTION Thank you for purchasing our Lift Products equipment We know you will be delighted with the Lift Products quality and performance Please read this owner s manual carefully before using your stationary lift Keep this manual in an accessible place for easy reference If calling or writing about your lift please give the model number and serial numbers so that your order or questions can be taken care of promptly INCREASED PRODUCTIVITY This sanitary lift can be used to raise and lower products vertically This could reduce loss time injuries due to back strain and cumulative trauma illness This reduction could increase job efficiency productivity and work quality SAFETY FIRST WARRING FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL CAN CAUSE PERSONAL INJURY AND OR PROPERTY DAMAGE Carefully read all safety signs and labels in good condition and replace those that are damaged WARNING WATCH HANDS AND FINGERS KEEP ALL EXTREMITIES AWAY FROM SCISSORS ARMS WHEN LIFT IS IN OPERATION Lift Products Safety Features e Co
3. MBLY SPARE PARTS LIST 10 11 12 13 14 16 CRS16 CAM FOLLOWER OPTIONAL PART FOR ROTATOR TOP UNIT e vm gt el GO el 8 e 6 AJ MI RECOMMENDED OILS AT VARIOUS TEMPERATURES OIL TEMPERATURE 60 40 20 0 20 40 60 80 100 UNIVIS J26 1 1 I t I l l I l i 1 I 1 1 I 1 l SAE S a GORGE SAE PE SAE 10W40 SAE 5W20 100 50 0 50 _ 100 150 OIL TEMPERATURE E 200 U l l 1 1 L 1 I 1 U 1 1 MAX RECOMMENDED PUMP OPERATING TEMPERATURE TEMPERATURE LIMITS BASED ON MAXIMUM VISCOSITY OF 1000 CENTISTOKES 5000 SSU AND MINIMUM VISCOSITY OF 15 CENTISTOKES 80 SSU
4. Stainless Steel Lift Table Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262 521 5720 FAX 262 521 5725 Toll Free 877 543 8776 Model SXT 040 36 and SXT 045 36 S N Customer LIFT PRODUCTS INC STANDARD WARRANTY Obligations of Seller During the warranty period Seller shall repair or at Seller s option replace parts determined by Seller to be defective in material or workmanship The warranty period is 1 year from the date of delivery to Buyer F O B point of manufacturer The foregoing shall be the sole obligation of Seller under this warrant with respect to the equipment and other property included in this agreement With respect to equipment materials parts and accessories manufactured by others Seller s sole obligation shall be to use reasonable efforts to obtain for Buyer the full benefit of the manufacturer s warranties and is limited to replacement of those components only Warranty does not include labor or expenses for removal or replacement of those items Warranty Exclusions Repair or replacement of parts required because of misuse improper care or storage negligence alteration accident use of incompatible supplies or lack of specified maintenance are excluded from Seller s warranty obligations Seller shall not be held responsible for work done material furnished repairs or designs made by others unless Seller so agrees in writing Further any such work done without Seller s consent
5. dures Lift Products recommends you grease these points on a weekly basis OPERATION WARNING KEEP ALL EXTREMITIES AWAY FROM ALL MOVING PARTS UNDER NO CIRCUM STANCES SHOULD ANY ONE WALK UNDER OR HAVE ANY PART OF THEIR BODY UNDER THIS LIFT NOTE LOADS MUST NOT EXCEED 4000LBS FOR THIS LIFT SXT MODEL Once the unit has been properly set up per the SET UP instructions try the unit empty first to test the operation to be sure it is working properly Then test the unit with a load Keep all loads properly centered and balanced as much as possible CAUTION AWKWARD PLACEMENT OF LOAD COULD CAUSE EQUIPMENT DAMAGE Engage the foot petal to raise or lower the lift The foot pedal is momentary control which allows easy operation The unit can be started or stopped at any position throughout the units cycle CAUTION WHEN LIFTING HEAVY LOADS DO NOT JOG THE UNIT MORE THAT 2 3 TIMES TOO QUICKLY WAIT APPROX 5 SECS BETWEEN EACH JOG SUDDEN JOGS MAY CAUSE THE UNIT TO HAVE SURGES IN ELECTRICAL POWER THIS COULD CAUSE THE FUSE TO TRIP EXCESSIVELY AND CAUSE IMPROPER WEAR ON THE HYDRAULIC UNIT To lower a product or to lower the top down itself depress the DOWN pedal and the unit will lower This done without the power unit engaging REMEMBER SAFETY FIRST IF YOU HAVE ANY PROBLEMS WITH YOUR LIFT CONSULT THE FOLLOWING PAGE FOR PROBLEMS SOLUTIONS Problem Situation Suggested Solution Check electrical service Check and
6. ntinouous touch start stop hand pendant buttons LOCK OUT PROCEDURES When cleaning maintaining or disassembly is required the lift should be completely powerless The main power to the lift controls and power unit must be disconnected and locked out SET UP 1 After locating the unit in the work area anchor the base firmly to a level floor before operating A When leveling the unit shims may be used to obtain a level position Lift Products recommends using a grout to provide a solid surface underneath the support angle base The channel must have a solid base to support the wheels or damage failure to the support could result There are 4 points on the lift These are located on the outside perimeter of the lift Use a corrosion resistant 3 4 bolt in ALL 4 points for proper anchorment C To access the four inside anchor points the lift must be raised See the electrical diagram for proper wiring 2 Plug the power cable into a 100 AC properly grounded outlet with sufficient amperage capac ity to run a 1 HP electric motor 3 Check hydraulic fluid level in the reservoir The level should be 1 1 2 below the fill hole 4 Check each if the 6 grease points on the lift They are located on the four wheel areas and the middle of the scissor arms These are usually greased from our factory 5 The 6 grease points should be greased on regular basis Depending on your type of opera tion and wash down proce
7. or replace fuse Loose wires in juction box Check and or replace motor Motor to power unit does not turn on Motor turns on but will not lift product Motor and pump do not run smoothly Non level platform while raising load Excessive oil about base of hydraulic cylinders Hydraulic fluid is low and needs to be filled Pump coupling between motor and hydraulic pump has come loose or needs to be replaced Check and or replace hydraulic pump Strainer has become plugged and needs to be cleaned Air in the hydraulic lines needs to be removed Dirt or foreign particles in hydraulic fluid Motor has come loose from base plate and needs tightening Check and or replace hydraulic pump Check and or replace motor Air in the hydraulic cylinders needs to be removed Check and or replace roller chain and sprocket Flow divider is plugged Hydraulic fitting to cylinder is loose and needs to be tightened Check and or replace hydraulic hose O rings in hydraulic cylinders need to be replace SERVICE PARTS LIST 2 fuss we 3 1487AA 1485AA 2361AB COUPLING 6 ng 7 Jka ue JET oac _ SUCTONcover i O rzsooroo BOW 11 161AA STRAINER 12 kreo RESERVOIR 18 misaa BREATHER 14 Joos RELIEF VALVE O 15 PS027 0038 SUBPLATE 16 02160700 SOLENOID 17 CBV1 10 5 1A6T 50 25 COUNTERBALANCE VALVE 18 _ 655011 003 115DF T 10 DIRECTIONAL VALVE POWER UNIT ASSE

Download Pdf Manuals

image

Related Search

Related Contents

Exercices.  GT SoftGOT Version5 Operating Manual  PUESTA EN MARCHA - TC    Étiquette - OJ Compagnie  PDF Manual  Olympia PS 24 CCD  

Copyright © All rights reserved.
Failed to retrieve file