Home

MDR-RF810RK

image

Contents

1. 12 OdB 698 INPUT CHARGE DCIN 12 Vers la prise DC IN 12V Vers une prise secteur Adaptateur secteur fourni 5 Assurez vous de r gler le commutateur situ sur le bo tier gauche sur OFF Raccordez ensuite la fiche CHARGE du transmetteur la prise situ e sur le bo tier gauche L indicateur POWER situ sur le transmetteur s allume en rouge Avant la premi re utilisation chargez la batterie rechargeable jusqu ce que l indicateur POWER rouge s teigne ce qui prend environ 16 heures Par la suite le temps de charge compl te est peu pr s gal la dur e de fonctionnement chue Quelle que soit la charge restante de la batterie l indicateur POWER rouge s teint environ 16 heures apr s le d but de la charge a Transmetteur Fiche CHARGE H F m cr org Si l indicateur POWER du transmetteur ne s allume pas en rouge V rifiez que le commutateur situ sur l couteur gauche du casque est r gl sur OFF Si le commutateur est r gl sur ON l indicateur POWER ne s allume pas Vous ne pouvez pas recharger de pile rechargeable ou de pile s che autre que celle fournie Rechargement de la pile du casque apr s utilisation Branchez le casque sur la fiche CHARGE du transmetteur comme indiqu l tape 5 de la section Chargement de la pile rechargeable f
2. 3 S lectionnez la fr quence radio l aide du s lecteur CHANNEL CHANNEL 4 Allumez le commutateur situ sur le bo tier gauche du casque V rifiez que l indicateur d alimentation situ sur le bo tier gauche s allume en rouge Veillez placer le bo tier droit sur votre oreille droite et le bo tier gauche sur votre oreille gauche L couteur gauche marqu D porte un point tactile pour le distinguer 5 S lectionnez le canal correspondant au transmetteur l aide du commutateur situ sur le bo tier droit du casque Montez le volume un niveau mod r l aide de la commande VOLUME situ e sur le bo tier gauche gt VOLUME Emission de signaux RF par le transmetteur Le transmetteur commence automatiquement transmettre des signaux RF lorsqu il d tecte les signaux audio mis par l appareil raccord Sil ne d tecte pas de signal audio pendant plus d environ 4 minutes le transmetteur cesse d mettre des signaux RF et l indicateur POWER clignote pendant 1 minute puis s teint Lorsque le transmetteur capte nouveau un signal audio il recommence mettre des signaux RF et l indicateur POWER s allume de nouveau en vert Vous risquez de ne pas entendre le d but de l mission sonore dans le casque en attendant que le transmetteur commence mettre des signaux RF apr s la d tection de signaux audio
3. Card warranty 1 Operating Instructions 1 To an AC outlet Charging the supplied rechargeable battery The supplied rechargeable nickel metal hydride battery is not charged from the first time you use them Charge them before use To charge the battery connect the CHARGE plug of the transmitter to the headphones 1 Remove the battery compartment lid on the left housing of the headphones There are tactile dots on the upper side of the lid and the housing to check the position of the lid Press and turn the lid counter clockwise with your palm so that the dot on the lid aligns with the left side dot of the housing Incline the headphones to drop the cover off the housing 2 Insert the supplied rechargeable nickel metal hydride battery into the battery compartment matching the terminals on the battery to the marks in the compartment Do not use rechargeable battery other than the supplied ones 3 Close the battery compartment lid Press and turn the lid clockwise with your palm so that the tactile dot on the lid matches to right side dot of the housing SS 4 Connect the supplied AC power adaptor to the transmitter Transmitter DC OUT 62N A CHANNEL AT 50m MAX 12 OdB 69B INPUT CHARGE To DC IN 12V jack AC power adaptor supplied 5 Make sure to set the switch located on the left housing to OFF After that c
4. 3 de la section Chargement de la pile rechargeable fournie Lorsque vous utilisez des piles s ches la fonction de recharge de piles nest pas activ e Dur e de vie des piles Piles Dur e approx 28 heures Pile alcaline Sony LRO3 AM 4 N sortie de 1 mW 1 mW 1 kHz 2 La dur e indiqu e ci dessus peut varier selon la temp rature ou les conditions d utilisation Remarques sur les piles Ne rechargez pas une pile s che Ne mettez pas une pile s che en contact avec des pi ces de monnaie ou d autres objets m talliques Si le p le positif et le p le n gatif de la pile sont mis en contact l un avec l autre via un objet m tallique de la chaleur peut tre g n r e Si vous pr voyez de ne pas utiliser l appareil pendant une longue p riode retirez en les piles afin d viter des d g ts dus une fuite d lectrolyte et la corrosion V rification de l autonomie de la pile Allumez le commutateur situ sur le bo tier gauche du casque et v rifiez l indicateur POWER situ sur le bo tier gauche La pile est encore en tat de marche lorsque l indicateur s allume en rouge Si l indicateur POWER s allume faiblement clignote ou si le son est d form ou comporte des parasites mettez charger la pile rechargeable ou installez des piles s ches neuves Remarque La pile rechargeable nickel hydrure m tallique doit tre remplac e lorsque sa dur e d utilisation est inf rie
5. limitation automatique du volume d sactivez cette fonction lorsque vous utilisez le transmetteur Sinon vous devez augmenter le volume du casque ce qui peut provoquer des parasites Ne soulevez pas l metteur par l antenne Le couvercle d antenne risque de se d tacher Si tel est le cas remettez le en place comme auparavant Couvercle d antenne R glage du volume d entr e Si le volume est lev lorsque vous utilisez l entr e analogique r glez le commutateur ATT att nuateur sur 6 dB AT I OdB 6dB R glage Appareils raccord s 0 dB T l viseur appareils portables et autres appareils faible niveau de sortie r glages initiaux 6 dB Autres appareils Remarques Baissez le volume avant de r gler le commutateur ATT Si le son re u est d form il peut arriver que des parasites soient audibles en plus du son mis r glez le commutateur ATT sur 6 dB B Utilisation du syst me Ecoute d un programme Avant l coute R duisez d abord le volume pour viter d alt rer votre ou e 1 Allumez l appareil audio vid o raccord au transmetteur Si le transmetteur est raccord la prise de casque r glez la commande du volume de l appareil audio source le plus haut possible mais sans que le signal audio ne soit d form 2 D branchez la fiche CHARGE du casque Lindicateur POWER du transmetteur s allume en vert Transmetteur
6. o laide de la prise casque augmentez le volume de l appareil audio vid o raccord un niveau nentrainant aucune d formation du son Distorsion gt Si le transmetteur est raccord la prise de casque baissez le volume de l appareil audio vid o raccord gt Changez la fr quence radio avec le s lecteur CHANNEL du transmetteur et le commutateur situ sur le boitier droit du casque gt Lindicateur POWER du casque s teint perd son intensit clignote ou le son est d form ou comporte des parasites Chargez la pile rechargeable si elle est faible ou remplacez les piles alcalines par des piles neuves Si l indicateur POWER reste teint apr s avoir charg la pile apportez votre casque chez un revendeur Sony Bruit de fond important gt Rapprochez vous du transmetteur Plus vous vous loignez du transmetteur plus vous risquez dentendre des parasites gt Si le transmetteur est raccord la prise de casque augmentez le volume de l appareil audio vid o raccord gt Changez la fr quence radio l aide du s lecteur CHANNEL du transmetteur puis s lectionnez la m me fr quence radio avec le commutateur situ sur le boitier droit du casque gt Lindicateur POWER du casque s teint perd son intensit clignote ou le son est d form ou comporte des parasites Chargez la pile rechargeable si elle est faible ou remplacez les piles alcalines par des piles neuves Si l indicateur POWER reste tei
7. rechargeable fournie Raccordement facile au t l viseur et au syst me audio HiFi Port e de r ception jusqu 100 m tres Fonction de commande du volume sur le casque Remarques sur les performances de r ception Etant donn que le syst me de cet appareil utilise des signaux de tr s haute fr quence dans la gamme des 800 MHz l environnement peut avoir une influence sur la qualit de la r ception Les exemples suivants illustrent les conditions qui peuvent r duire la port e de r ception ou causer des interf rences sur la r ception Dans un b timent dont les murs contiennent des poutres d acier Dans une pi ce contenant de nombreuses armoires en acier ou autres meubles m talliques e A proximit d appareils lectriques pouvant produire des champs lectromagn tiques Utilisation lorsque le transmetteur est pos sur un objet m tallique A proximit dune route Parasites ou interf rences dans le voisinage dus la pr sence d metteurs radio par exemple dans des camions Parasites ou interf rences dans le voisinage dus des syst mes de communication sans fil install s le long des routes D Pr paratifs D ballage V rifiez que vous disposez des accessoires suivants Le casque 1 Le transmetteur 1 Remarque Si le couvercle d antenne se d tache du transmetteur remettez le sur le transmetteur e Adaptateur secteur 1 Pile rechargea
8. mini plug Dimensions Approx 108 x 128 x 108 mm 45 8 x 5 1 5 x 43 sin w h d Mass Approx 137 g 4 83 oz Rated power consumption 3W Headphones MDR RF810R Power source Supplied rechargeable nickel metal hydride battery BP HP550 11 or commercially available size AAA dry cell batteries Mass Approx 270 g 9 52 oz including the supplied rechargeable nickel metal hydride battery Rated power consumption 2W Design and specifications are subject to change without notice AVERTISSEMENT Pour viter tout risque d incendie ou de choc lectrique nexposez pas l appareil des gouttelettes ou des claboussures et ne placez pas d objets remplis de liquide tels que des vases sur l appareil Pour viter tout risque d lectrocution nouvrez pas le coffret Ne confiez les r parations qu un technicien qualifi Comme la fiche de l adaptateur secteur est utilis e pour le d brancher de l alimentation branchez la une prise secteur facilement accessible Si vous remarquez une anomalie au niveau de la fiche d branchez la imm diatement de la prise secteur Niinstallez pas l appareil dans un espace restreint comme une biblioth que ou un meuble encastr Nexposez pas les piles ou les appareils contenant des piles une chaleur excessive notamment aux rayons directs du soleil une flamme etc La marque le nom du fabricant et le num ro de mod le se trouvent sur le dessous de l appareil Une pressio
9. qui vous entourent En cas de questions ou de probl mes concernant le fonctionnement de ce syst me qui ne sont pas abord s dans ce mode d emploi consultez votre revendeur Sony le plus proche Apportez le casque et le transmetteur lorsque vous vous rendez chez votre revendeur Sony pour des r parations D pannage Aucun son son touff gt V rifiez le raccordement de l quipement audio vid o ou de l adaptateur secteur gt V rifiez que l appareil audio vid o raccord est sous tension gt Augmentez le volume de l appareil audio vid o raccord si le transmetteur est raccord la prise de casque gt Changez la fr quence radio l aide du s lecteur CHANNEL du transmetteur puis s lectionnez la m me fr quence radio avec le commutateur situ sur le bo tier droit du casque La fonction de sourdine est activ e Utilisez le casque proximit du transmetteur gt Lindicateur POWER du casque s teint perd son intensit clignote ou le son est d form ou comporte des parasites Chargez la pile rechargeable si elle est faible ou remplacez les piles alcalines par des piles neuves Si l indicateur POWER reste teint apr s avoir charg la pile apportez votre casque chez un revendeur Sony Le son est coup gt Le transmetteur cesse d mettre s il re oit un son de faible ou s il ne d tecte aucun signal pendant plus de 4 minutes Si vous raccordez le transmetteur un appareil audio vid
10. to the transmitter Transmitter CHANNEL 12 INPUT CHARGE ES DOIN 12V To DC IN 12V jack lt To an AC outlet AC power adaptor supplied Notes Use only the supplied AC power adaptor Do not use any other AC power adaptor dD Polarity of the plug When the transmitter is placed on or near a TV it may pick up a noise In such a case place the transmitter away from the TV If the connected equipment has the AVLS Automatic Volume Limiter System function be sure to turn the function off when using the transmitter Otherwise you will have to turn up the volume of the headphones and that may cause noise Do not lift the transmitter by the aerial The aerial cover may become detached If it becomes detached attach it back where it was before Aerial cover Setting the input level If the volume is high using the analogue input set the ATT attenuator switch to 6 dB ATT Mm OdB 6dB Setting Connected components 0 dB TV portable components and other components with a low output level initial settings 6 dB Other components Notes Be sure to lower the volume before setting the ATT switch If audio input is distorted sometimes noise can be heard at the same time set the ATT switch to 6 dB Operating the system Listening to a programme B
11. La transmission de signaux RF peut s arr ter lorsqu un son extr mement faible est re u pendant environ 4 minutes En pareil cas augmentez le volume de l appareil audio vid o raccord un niveau qui nentraine aucune d formation du son et baissez le volume du casque Remarques Si vous entendez un sifflement rapprochez vous du transmetteur Vous risquez d entendre des parasites si vous d branchez l adaptateur secteur du transmetteur avant d teindre le casque Port e du transmetteur Le syst me peut fonctionner sans capter d interf rences une distance optimale pouvant atteindre environ 100 m Cependant la distance peut varier en fonction de lenvironnement Si le syst me capte des parasites moins de 100 m r duisez la distance entre le transmetteur et le casque ou s lectionnez un autre canal Remarques Lorsque vous utilisez le casque dans la port e du transmetteur le casque peut tre plac n importe quelle position par rapport au transmetteur M me dans la zone de r ception des signaux il existe des endroits point mort o le signal RF ne peut pas tre capt Cette caract ristique est inh rente aux signaux RF et n indique pas un mauvais fonctionnement En d pla ant l g rement le transmetteur vous pouvez d placer le point mort Remplacement des oreillettes Les oreillettes peuvent tre remplac es Si les oreillettes deviennent sales ou si elles sont us es remplacez les
12. SONY 4 170 753 14 1 Wireless Stereo Headphone System Operating Instructions Mode d emploi MDR RF810RK 2010 Sony Corporation Printed in China WARNING To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only As the main plug of AC power adaptor is used to disconnect the AC power adaptor from the mains connect it to an easily accessible AC outlet Should you notice an abnormality in it disconnect it from the AC outlet immediately Do not install the appliance in a confined space such as a bookcase or built in cabinet Do not expose batteries or apparatus with battery installed to excessive heat such as sunshine fire or the like Trademark manufacturer and model number are located on the bottom of the unit Excessive sound pressure from earphones and headphones can cause hearing loss CE Hereby Sony Corp declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For details please access the following URL http www compliance sony de Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or o
13. an generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects If you are not going to use the unit for a long time remove the batteries to avoid damage from battery leakage or corrosion Checking the remaining battery power Turn on the switch located on the left housing of the headphone and check the POWER indicator located on the left housing The battery are still serviceable when the indicator lights up red Charge the rechargeable battery or install new dry cell batteries if the POWER indicator light dims flashes or the sound becomes distorted or noisy Note The rechargeable nickel metal hydride battery should be replaced with new ones when they last only half the expected time after a proper recharging The rechargeable battery type BP HP550 11 are not commercially available You can order the battery from the store where you purchased this system or at your nearest Sony dealer Setting up the transmitter 1 Connect the transmitter to audio video equipment Transmitter DC OUT 62N A CHANNEL AT 150mA MAX mn m 12 068 608 CHARGE LES DOIN 12V Connecting cord Ce xf To headphones jack Stereo mini jack LINE OUT or REC OUT jacks WALKMAN TV etc WALKMAN and WALKMAN logo are registered trademarks of Sony Coporation 2 Connect the supplied AC power adaptor
14. ave any questions or problems concerning the system that are not covered in this manual please consult your nearest Sony dealer Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work Troubleshooting No sound Muffled sound gt Check the connection of the audio video equipment or the AC power adaptor gt Check that the audio video equipment is turned on gt Turn up the volume on the connected audio video equipment if the transmitter is connected to the headphones jack gt Change the radio frequency with the CHANNEL selector on the transmitter then select the same radio frequency with the switch on the right housing of the headphones gt The mute function is activated Use the headphones near the transmitter gt The headphones POWER indicator light turns off dims flashes or sound becomes distorted or noisy Charge the rechargeable battery if it is weak or replace alkaline batteries with new ones If the POWER indicator is still off after charging the battery take the headphones to a Sony dealer The sound cuts off gt The transmitter stops transmitting if low sound or no signal is input for 4 minutes If you connect the transmitter to an AV component using the headphone jack raise the volume level on the connected AV component within the range where the sound is not distorted Distortion gt Ifthe transmitter is connected to the headphone jack tur
15. ble nickel hydrure m tallique BP HP550 11 1 Carte de garantie 1 Mode d emploi 1 Chargement de la pile rechargeable fournie La pile rechargeable nickel hydrure m tallique fournie nest pas charg e lors de la premi re utilisation Veillez la charger avant de l utiliser Pour charger la pile raccordez la fiche CHARGE du transmetteur au casque 1 Retirez le couvercle du logement de la pile du bo tier gauche du casque La partie sup rieure du couvercle et du bo tier comporte des points tactiles permettant de v rifier la position du couvercle Appuyez sur le couvercle et tournez le dans le sens anti horaire avec la paume de la main de sorte que le point situ sur le couvercle soit align avec le point situ sur le c t gauche du bo tier Inclinez le casque pour faire tomber le couvercle du bo tier 2 Ins rez la pile rechargeable nickel hydrure m tallique fournie dans le logement de la pile en faisant correspondre les bornes de la pile aux rep res du logement N utilisez pas de pile rechargeable autre que celle fournie 3 Refermez le couvercle du logement de la pile Appuyez sur le couvercle et tournez le dans le sens horaire avec la paume de la main de sorte que le point tactile situ sur le couvercle soit align avec le point situ sur le c t droit du bo tier NUS 4 Raccordez l adaptateur secteur fourni au transmetteur Transmetteur CHANNEL
16. d utilisation Rapportez les piles ou accumulateurs usag s au point de collecte appropri pour le recyclage Pour toute information compl mentaire au sujet du recyclage de ce produit ou des piles et accumulateurs vous pouvez contacter votre municipalit votre d chetterie locale ou le point de vente o vous avez achet ce produit Avis l intention des clients les informations suivantes concernent uniquement les appareils vendus dans les pays appliquant les directives de l UE Le fabricant de ce produit est Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japon Le repr sentant autoris pour les questions de compatibilit lectromagn tique EMC et la s curit des produits est Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Allemagne Pour toute question relative au SAV ou la garantie merci de bien vouloir vous r f rer aux coordonn es contenues dans les documents relatifs au SAV ou la garantie F licitations Nous vous remercions pour l achat de ce syst me de casque st r o sans fil Sony MDR RF810RK Avant d utiliser cet appareil lisez attentivement le pr sent mode d emploi et conservez le pour toute r f rence ult rieure Cet appareil offre entre autres les caract ristiques suivantes e Syst me sans fil permettant d couter une mission en toute libert sans cordon Reproduction du son dune grande fid lit Environ 13 heures d utilisation continue avec la pile
17. efore listening To reduce the risk of hearing damage first lower the volume 1 Turn on the audio video equipment connected to the transmitter If the transmitter is connected to the headphone jack set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted 2 Disconnect the CHARGE plug from the headphones The transmitter s POWER indicator lights up green Transmitter 3 Select the radio frequency with the CHANNEL selector switch CHANNEL 4 Turn on the switch on the left housing of the headphones Check if the power indicator on the left housing lights up red Place the right housing on your right ear and the left housing on your left ear There is a tactile dot on the hanger marked to distinguish the left side pou 5 Select the channel to that of the transmitter with the switch on the right housing of the headphones Turn up the volume to a moderate level with the VOLUME control on the left housing Sending RF signals from the transmitter The transmitter starts sending RF signals automatically when it detects an audio signal from the connected equipment If the transmitter does not detect an audio signal for more than about 4 minutes it will stop sending RF signals and the POWER indicator will blink for 1 minute and then turn off Whe
18. n down the volume on the connected audio video equipment gt Change the radio frequency with the CHANNEL selector on the transmitter and the switch on the right housing of the headphones gt The headphones POWER indicator light turns off dims flashes or sound becomes distorted or noisy Charge the rechargeable battery if it is weak or replace alkaline batteries with new ones If the POWER indicator is still off after charging the battery take the headphones to a Sony dealer Loud background noise gt Move closer to the transmitter As you move away from the transmitter more noise is likely to be heard gt Ifthe transmitter is connected to the headphones jack turn up the volume of the connected audio video equipment gt Change the radio frequency with the CHANNEL selector on the transmitter then select the same radio frequency with the switch on the right housing of the headphones gt The headphones POWER indicator light turns off dims flashes or sound becomes distorted or noisy Charge the rechargeable battery if it is weak or replace alkaline batteries with new ones If the POWER indicator is still off after charging the battery take the headphones to a Sony dealer Specifications General Carrier frequency 863 52 MHz 864 52 MHz Channel Chl Ch2 Modulation FM stereo Frequency response 20 20 000 Hz Transmitter TMR RF810R Power source DC 12 V supplied AC power adaptor Audio input Stereo
19. n its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Disposal of waste batteries applicable in the European Union and other European countries with separate collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resource
20. n sonore excessive des couteurs ou du casque peut provoquer des pertes d audition CE Par la pr sente Sony Corp d clare que l appareil quipement est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Pour toute information compl mentaire veuillez consulter PURL suivante http www compliance sony de Traitement des appareils lectriques et lectroniques en fin de vie Applicable dans les pays de l Union Europ enne et aux autres pays europ ens disposant de syst mes de collecte s lective Ce symbole appos sur le produit ou sur son emballage indique que ce produit ne doit pas tre trait avec les d chets m nagers Il doit tre remis un point de collecte appropri pour le recyclage des quipements lectriques et lectroniques En vous assurant que ce produit sont mis au rebut de fa on appropri e vous participez activement la pr vention des cons quences n gatives que leur mauvais traitement pourrait provoquer sur l environnement et sur la sant humaine Le recyclage des mat riaux contribue par ailleurs la pr servation des ressources naturelles Pour toute information compl mentaire au sujet du recyclage de ce produit vous pouvez contacter votre municipalit votre d chetterie locale ou le point de vente o vous avez achet le produit Elimination des piles et accumulateurs usag s Applicable dans les pays de l Union Europ enne e
21. n the transmitter receives an audio signal again it starts sending the RF signals and the POWER indicator will light up green again You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal RF signal transmission may stop when an extremely low sound is input for about 4 minutes If this happens raise the volume of the connected AV component within the range where the sound is not distorted and lower the volume of the headphones Notes If hiss is heard move closer to the transmitter You may hear some noise when you disconnect the AC power adaptor from the transmitter before turn off the headphones The effective areas of the transmitter The optimum distance is up to approximately 100 m without the system picking up some interference However the distance may vary depending on the surroundings and environment If the system picks up some noise within the above mentioned distance reduce the distance between the transmitter unit and the headphones or select another channel Notes When you use the headphones inside the effective areas of the transmitter the transmitter can be placed in any direction from the listener Even within the signal reception area there are some spots dead spots where the RF signal cannot be received This characteristics is inherent to RF signals and does not indicate malfunction By slightly m
22. nt apr s avoir charg la pile apportez votre casque chez un revendeur Sony Sp cifications G n ralit s Fr quence porteuse 863 52 MHz 864 52 MHz Canal Ch1 Ch2 Modulation FM st r o R ponse en fr quence 20 20 000 Hz Transmetteur TMR RF810R Source d alimentation 12 V CC adaptateur secteur fourni Entr e audio Mini prise st r o Dimensions Environ 108 x 128 x 108 mm 45 8 x 5 1 3 x 43 s po I h p Masse Environ 137 g 4 83 on Consommation lectrique nominale 3W Casque MDR RF810R Source d alimentation Pile rechargeable nickel hydrure m tallique BP HP550 11 fournie ou piles s ches taille AAA disponibles dans le commerce Masse Environ 270 g 9 52 on y compris la pile rechargeable nickel hydrure m tallique fournie Consommation lectrique nominale 2W La conception et les sp cifications sont sujettes modification sans pr avis
23. onnect the CHARGE plug of the transmitter to jack located on the left housing POWER indicator located on the transmitter lights up red Prior to using for the first time charge the rechargeable battery until the POWER indicator red turns off approximately 16 hours From the next time charging time to the full charge will be almost equal to the previous operating time Regardless of remaining battery charge the POWER indicator red will turn off approximately 16 hours after charging starts Transmitter Headphones CHARGE plug When the transmitter s POWER indicator does not light up red Check if the switch on the left housing of the headphones is set to OFF If the switch is set to ON the POWER indicator does not light up You cannot charge any rechargeable battery or dry cell battery other than the supplied battery To recharge the headphone battery after use Connect the headphones to the CHARGE plug of the transmitter in the same manner as described in step 5 of Charging the supplied rechargeable battery after use Since the built in timer recognises when charging is complete there is no need to remove the headphones from the transmitter after charging Notes Do not connect the CHARGE plug to anything other than these headphones The transmitter automatically stops sending RF signals while charging the battery This system is designed to charge only the sup
24. ournie Etant donn que la minuterie int gr e d tecte la fin de la charge vous n avez pas besoin de retirer le casque du transmetteur une fois la charge termin e Remarques Ne branchez pas la fiche CHARGE ailleurs que sur ce casque Le transmetteur cesse automatiquement d mettre des signaux RF pendant la mise en charge de la pile Pour des raisons de s curit ce syst me est con u pour recharger uniquement la pile rechargeable fournie de type BP HP550 11 Les autres types de piles rechargeables ne peuvent pas tre recharg s avec ce syst me Les piles s ches ne peuvent pas tre recharg es Nessayez pas d utiliser la pile rechargeable BPHP550 11 fournie avec d autres appareils Elle est con ue pour tre utilis e exclusivement avec ce syst me Effectuez la charge une temp rature ambiante de 0 C 40 C de 32 F 104 F Dur es de charge et d utilisation Dur e d utilisation approx Dur e de charge approx 1 heure 45 minutes 16 heures 13 heures sortie de 1 mW 1 mW 1 kHz dur e n cessaire la recharge compl te de la pile vide La dur e indiqu e ci dessus peut varier selon la temp rature ou les conditions d utilisation Utilisation du casque avec des piles s ches vendues s par ment Vous pouvez aussi utiliser des piles s ches AAA disponibles dans le commerce avec ce casque Installez les piles comme d crit dans les tapes 1
25. oving the transmitter location of the dead spot can be changed Replacing the earpads The earpads are replaceable If the earpads become dirty or worn out replace them as illustrated below The earpad is not commercially available You can order replacements from the store where you purchased this system or at your nearest Sony dealer 1 Remove the old earpad by pulling it out of the groove on the housing gt A 2 Place the new earpad on the driver unit Hang the edge of the earpad on one side of the driver unit s groove edge then turn the edge of earpad around the driver unit as illustrated below When the earpad is securely inserted into the groove adjust the earpad to the vertical position B Additional information Precautions Ifthe transmitter is not to be used for a long period of time disconnect the AC power adaptor from the AC outlet by holding the plug Do not pull on the cord Do not leave the wireless stereo headphone system in a location subject to direct sunlight heat or moisture Notes on headphones To reduce the risk of hearing damage Avoid using headphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce the volume or discontinue use Caring for others Keep the volume at a moderate level This will allow you to hear outside sounds and to be considerate to the people around you If you h
26. plied rechargeable battery type BP HP550 11 for safety Note that other types of rechargeable battery cannot be charged with this system If dry cell batteries are installed they cannot be charged Do not attempt to use the supplied BP HP550 11 rechargeable battery for other components They are for use with this system only Charge in an environmental temperature of between 0 C and 40 C between 32 F and 104 F Charging and usage hours Approx charging hours Approx usage time 1 hour 45 minutes 16 hours 13 hours at 1 kHz 1 mW 1 mW output hours required to fully charge empty battery 3 Time stated above may vary depending on the temperature or conditions of use Using the headphones with dry cell batteries sold separately Commercially available size AAA dry cell batteries can also be used to power the headphones Install the batteries in the same manner as described in steps 1 through 3 of Charging the supplied rechargeable battery When dry cell batteries are installed the battery charge function will not be activated Battery life Battery Approx hours Sony alkaline batteries 28 hours LRO3 AM 4 N at 1 kHz 1 mW 1 mW output Time stated above may vary depending on the temperature or conditions of use Notes on Batteries Do not charge a dry cell battery Do not carry a dry cell battery together with coins or other metallic objects It c
27. s In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Notice for customers the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents Welcome Thank you for purchasing the Sony MDR RF810RK Wireless Stereo Headphone System Before operating the unit please read this manual thoroughly and retain it for future reference Some fea
28. t aux autres pays europ ens disposant de syst mes de collecte s lective Ce symbole appos sur les piles et accumulateurs ou sur les emballages indique que les piles et accumulateurs fournis avec ce produit ne doivent pas tre trait s comme de simples d chets m nagers Sur certains types de piles ce symbole appara t parfois combin avec un symbole chimique Les symboles pour le mercure Hg ou le plomb Pb sont rajout s lorsque ces piles contiennent plus de 0 0005 de mercure ou 0 004 de plomb En vous assurant que ces piles et accumulateurs sont mis au rebut de fa on appropri e vous participez activement la pr vention des cons quences n gatives que leur mauvais traitement pourrait provoquer sur l environnement et sur la sant humaine Le recyclage des mat riaux contribue par ailleurs la pr servation des ressources naturelles Pour les produits qui pour des raisons de s curit de performance ou d int grit de donn es n cessitent une connexion permanente une pile ou un accumulateur il conviendra de vous rapprocher d un service technique qualifi pour effectuer son remplacement En rapportant votre appareil lectrique en fin de vie un point de collecte appropri vous vous assurez que la pile ou laccumulateur incorpor sera trait correctement Pour tous les autres cas de figure et afin d enlever les piles ou accumulateurs en toute s curit de votre appareil reportez vous au manuel
29. tel qu indiqu dans l illustration ci dessous Les oreillettes ne sont pas disponibles dans le commerce Commandez des oreillettes de rechange dans le magasin o vous avez achet cet appareil ou chez votre revendeur agr Sony le plus proche 1 Retirez l oreillette usag e en la sortant de la rainure du bo tier Na C4 2 Installez la nouvelle oreillette sur le transducteur Posez le bord de l oreillette sur un c t de la rainure du transducteur puis tournez le bord de l oreillette autour du transducteur comme illustr ci dessous Lorsque l oreillette est bien ins r e dans la rainure ajustez la en position verticale Bb Informations compl mentaires Pr cautions e Si vous comptez ne pas utiliser le transmetteur pendant une longue p riode d branchez l adaptateur secteur de la prise secteur Tirez sur la fiche et non sur le cordon Gardez le syst me de casque st r o sans fil l abri de la lumi re directe du soleil de la chaleur et de humidit Remarques sur le casque Pr vention des troubles de l ou e Evitez utiliser le casque un volume lev Les sp cialistes de louie d conseillent une utilisation prolong e volume trop lev Si vous percevez un sifflement dans les oreilles r duisez le volume ou cessez d utiliser le casque Respect des autres R glez le volume un niveau mod r Cela vous permet d entendre les bruits externes tout en ne g nant pas les personnes
30. tures are e Wireless system that allows you to listen to a programme free from the restriction of a cord High fidelity sound reproduction 13 hours of continuous use with supplied rechargeable battery e Easy connection with TV and HiFi Audio system equipment e Up to 100 metres reception range Volume control function on the headphones Notes on receiving performance This system utilises very high frequency signals in the 800 MHz band so the receiving performance may deteriorate due to the surroundings The following examples illustrate conditions that may reduce the reception range or cause interference e Inside a building with walls containing steel beams e An area with many steel file cabinets etc e An area with many electrical appliances capable of generating electromagnetic fields The transmitter is placed on a metal instrument e Anarea facing a roadway Noise or interfering signals exist in the surroundings due to radio transceivers in trucks etc Noise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways B Getting started Unpacking Check that you have the following items The headphones 1 The transmitter 1 Note If the aerial cover come off from the transmitter put the cover back into the transmitter AC power adaptor 1 Rechargeable nickel metal hydride battery BP HP550 11 1
31. ure la moiti du temps pr vu m me apr s une recharge compl te La pile rechargeable de type BP HP550 11 mest pas directement disponible dans le commerce Commandez cette pile dans le magasin o vous avez achet cet appareil ou chez votre revendeur agr Sony Pr paration du transmetteur 1 Raccordez le transmetteur un appareil audio ou vid o Transmetteur DC OUT 62V A CHANNEL AT 150mA MAX 12 O8 B IN IT CHARGE oe DON 12V Cordon de liaison Ce ox Vers la prise de casque mini prise st r o les prises LINE OUT ou REC OUT WALKMAN t l viseur etc WALKMAN et le logo WALKMAN sont des marques d pos es de Sony Corporation 2 Branchez l adaptateur secteur fourni sur le transmetteur Transmetteur CHANNEL 12 OS amp B INPUT CHARGE DON 12V Vers la prise DCIN 12V lt Vers une prise secteur Adaptateur secteur fourni Remarques Utilisez uniquement l adaptateur secteur fourni N utilisez aucun autre adaptateur secteur dD Polarit de la fiche Lorsque le transmetteur est plac sur ou proximit d un t l viseur il peut capter des parasites Dans ce cas loignez le transmetteur du t l viseur Si l appareil raccord dispose de la fonction AVLS syst me de

Download Pdf Manuals

image

Related Search

Related Contents

Hotpoint RZA36 User's Manual    (社)日本バルブ工業会 施工注意事項チラシ公開のお知らせ  Télécharger (2.8 Mo)  

Copyright © All rights reserved.
Failed to retrieve file