the manual
Contents
1. Copyright 2002 Geni Electronics Co Ltd Product specifications may be subject to change For more information please visit our web site Http www geni com tw Thank you SHOCRRONIO FL 01CX Compact reliable strobe controller can remotely control the flash rate of 1 to 4 strobes Flash rate can beset from 1 to 10 flashes per second c CAUTION Risk of electric shock Read instructions before installing or connecting to power Warning e Never operate unit when case is open e Never operate unit in the rain or in damp moist conditions as this could cause electric shock e Follow standard electrical safely precautions when installing operating or servicing the unit to prevent electrical shock fire or equipment damage e These units are for commercial use and contain no user serviceable parts inside e Servicing must be conducted by qualified service personnel FL O01CX strobe controller Power cord J Signa output Speed Control Power Switch Trigger Auto Manu Operating instructions This unitis the unsophisticated type of strobe controller You could use the automatic and manual mode to control the flash of the strobe i 2 T Unpack unit From carton and inspect for damage if unitis damaged please contact your Geni dealer immediately Connect controller to strobe the FL 075 or FL 1800 with a signal cable made of two standard 1 4 mono jacks2. with proper cable See belowfor signal specifications Plug power cord into properly grounded socket Check that the voltage marked onthe back of unitis correct for your area While the button of POWER ON OFF is ON the upper red LED is lit which indicates the power of controller starts for operating While the button of AUTO MANUis ON the upper red LED is lit which indicates the timer of automatic flash starts the interval of time could be adjusted by RATE knob andthe interval of time could be from 0 1second to 2 seconds When ittrigged the flash once the green LED also flashes once While the button of TRIGGER is ON which indicated to start the control of manual flash press the button once then the trigger flash once andthe green LED also flashes once when the unit trigged When AUTO MANU is ON the button of trigger also could be work The order of trigger flash Manual Trigger Automatic intermittent trigger Installation Unit canbe mounted in any position Signal specification Trigger isa positive 10 12VDC pulse high lor minimum 30ms Tip or 1 4 jack is positive signal base negative Maintenance No user serviceable parts refer servicing to a qualified service technician Specifications Number of strobe 8 unit maximum Output signal 10 12VDC Voltage Refer detail the back of unit Fuse Internal 0 5A 250V Dimensions 120x65x35mm LxWxH Weight 353g
Download Pdf Manuals
Related Search