OPC-1222
Contents
1. OEthernet2. OEthernet OEthernet a ce A Liss
3. G 1 4 547 0003 1 32 003 0806 6 2 2 7 TEL 011 820 3888 983 0857 54 TEL 022 298 6211 M 4 TEL 03 5600 468 0066 3 249 TEL 052 832 2525 A 130 0021 x ine a 0331 3 4 Ethernet 5 oot 547 0004 1 6 19 TEL 06 6793 0331 13 733 0842 9 TEL 082 50
4. 1 4321 760 0071 3 19 43 TEL 087 835 3723 815 0032 4 5 48 TEL 092 541 0211 A 6221X 5G Printed in Japan 2003 Icom Inc I O e ICOM INSTRUCTIONS Extension Ethernet Cable OPC 1222 E PRECAUTION Thank you for purchasing Extension Eth ernet Cable OPC 1222 The OPC 1222 is the extension ethernet cable for Icom wireless LAN unit Before using the OPC 1222 please read this instruction sheet carefully Read PRECAUTION in the instruction manual supplied with Icom s Wireless LAN unit together A WARNING NEVER connect the cable except for the specified wireless LAN unit This may pose a fire hazard or result in an electric shock NEVER use the other manufacture s Eth ernet cable This may pose a fire hazard or result in an electric shock NEVER install the unit where it may be knocked or disturbed by people passing by This may cause the unit to fall and people may be injured and the unit damaged NEVER install the unit near any power line or overhead cables The unit may con tact the cable causing a danger or electro cution or fire NEVER place any heavy object on the connecting cable or pinch it This may cause the unit to be damaged and pose a fire hazard or result in an electric shock NEVER cut bend by force twist pull or heat the connecting cable This may cause the unit to be damaged and pose a fire haz ard or result in an elec
5. O ICOM 20m OPC 1222 LAN Etnhernet LAN H IR LAN Ethernet
6. rp so wear working gloves when you replace the cable Otherwise you may be injured After dis connected Remove the waterproof gasket Be careful not to a break the locking oe wel lever Never reverse this gasket when replacing To attach the cable complete the same steps in reverse Count on us
7. tric shock DO NOT change the cable without wear ing working gloves Otherwise you may be injured DO NOT disassemble any unspecified components and follow the steps in this in struction This may pose a fire hazard or re sult in an electric shock or the unit may be damaged DO NOT change in location where the units can easily become wet This may pose a fire hazard or result in an electric shock DO NOT perform the installation work at an unstable site You may fall to the ground or may be injured Icom Icom Inc and com are registered trademarks of Icom Incorporated Japan in the United States United Kingdom Germany France Spain Russia and or other countries E Before replace the cable Instructions on how to remove the cable are described below To attach the cable complete the same steps in reverse Phillips screwdriver and standard screwdriver are required for removing the cable Disconnect the wireless LAN unit from your LAN system Do not disassemble any unspecified components and follow steps in these instructions E How to remove the cable Loosen the sealing nut Remove four screws Icom Inc 1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan Remove the screw which fixes the grounding wire Disconnect the cable Disconnect the es cable while press ing the locking lever with a standard screwdriver Z CAUTION The edge of the plate is sha
Download Pdf Manuals
Related Search
OPC 1222 opc-1222a opc 1122u schematic opc 1122u driver opc 1122u opc 1227 box 78 apo ae 09877-1 saudi arabia opc 1622n