SPEED COBRA DRUM PEDALS HP310L / HP310LW
Contents
1. Fig 1 Fig 2 1 3 Fig 32. IO
3. CC900S HP310L HP310LW Part Names Beater holder Rocker cam Spring Locknut Footboard Spring adjusting nut Hoop clamp Cobra Coil compatible hole Photo 1 HP310L JN Spring Loosen lt Lock nut lt Press down Adjusting nut Beater holder Universal joint Rocker cam Spring Connecting tube 5 2 2 Locknut Connecting rod Sly SDrind adjuSting nut SS Footboard _ Cobra Coil compatible hole Photo 2 HP310LW CC900S Photo 3 Attaching the Conne
4. A HP310LW HP310LW
5. SPEED COBRA DRUM PEDALS HP310L HP310LW INSTRUCTION MANUAL Thank you very much for purchasing TAMA SPEED COBRA drum pedal For better understanding of its features and capabilities please read through this manual before use Store the manual in a convenient place for future reference Notes This equipment is for playing the drums only Do not use it for any other Durpose as there is arISK of injury to other personSs or damage to DrODerty Take care to keep the drum pedal out of reach of small children Thereisa risk of injury if the drum pedal is used barefoot Please wear suitable footwear Thereisa risk of soiling or damaging floor Surfaces We recommend placing the drum set on carpeting or some other floor covering Installing the Beater Loosen the square head bolt of the beater holder using a tuning key Insert the beater shaft and adjust it to the desired height Then tighten the bolt to secure it The beater head is designed with two Surfaces one felt and one nylon to be used at the performer s discretion When securing the beater attach the pedal to the bass drum and press the footboard so that the beater surface you have chosen makes contact with the drumhead Then tighten the bolt to secure the beater in the correct position Attaching the Pedal Unit The pedal unit is attached to the bass drum Loosen the bolt of the hoop clamp and fasten the clamp to the hoop on
6. cting Rod HOSHINO GAKKICO LID 461 8717 3 22 http Www tama Ccom This manual is Current as of August 2014 Because we are always working to improve Our DrOducts some features may change without notice 2014 8
7. d and the left pedal to match Attaching the Connecting Rod HP310LW Attach the universal joints at the end of the connecting rod to the pedals Make sure that the square headed bolts for attaching the connecting rod are on top and on the drum side for the left pedal and on top and on the near side for the right pedal When assembling the connecting rod and connecting tube make sure that the widest flat side of connecting rod is facing up toward the Square headed bolt on top of the tube as in the photo at right After assembly adjust the length as desired and re tighten the bolts firmly Attaching the Cobra Coil sold separately The Cobra Coil CC900S is a spring that assists the return of the footboard allowing smoother and lighter pedal action The Cobra Coil can be installed on HP310L or HP310LW TAMA
8. the bass drum After making sure that it is fastened straight tighten the bolt again to secure it Adjusting the Spring Hang the spring on the roller of the rocker Cam Adjust the Spring tension using the nut on the lower end When adjusting the spring first loosen the locknut and then turn the adjusting nut while pressing down on the locknut as in Fig 1 2 Tightening the nut makes the pedal s resistance heavier but the beater s return time is correspondingly faster In order to prevent the spring from loosening while playing the adjusting nut engages the cap attached to the unit roughly every 1 3 of a turn Once the desired tension is reached Secure It by tightening the locknut as in Fig 3 Adjusting the Beater Angle The angle of the beater can be adjusted along with the angle of the footboard by loosening the square headed bolt on top of the rocker cam As the angle of the beater is lowered the footboard rises Once the desired angle is reached tighten the bolt firmly to secure it The factory set uD position is the surface A of the hexagonal shaft is facing up see photo 3 The left side beater of the twin pedal model HP310LW may be adjusted in the same way When a more delicate adjustment is needed you Can adjust the beater angle independently of the footboard angle by loosening the bot below the beater holder This feature is useful when you wish the footboard angles of both the hi hat stan
Download Pdf Manuals
Related Search