軽荷重用サイドスタンド B-Fit:s ビーフィッツ 取扱説明書
Contents
1. M5 XCaution Do not cut the leg too short IT s not repairable How To Install 1 Sandwich the chain stay with the stand and the backplate and tighten two bolts temporarily 2 Put the hook on top of the back plate Hook the seat stay 3 Adjust the stand position and the hook angle sits as deeply as possible on the seat stay 4 Firmly tighten all 3 bolts 5 Stand the bike temporarily and check how long the let needs to be 6 Remove the cap and cut to length using a saw 7 Install the cap again then stand the bike If the bike will not fall down even if you turn the handlebar to the max right end the leg length is OK If the bikes falls the leg is still too long Remove a few M5 washers from the cap Contact2. gt Ilf you have questions or need help first contact the store you purchased the product or the distributor in your country If your question remains unanswered then contact us here MINOURA JAPAN 503 2305 1197 1 1197 1 Godo Anpachi Gifu 503 2305 Japan Phone 0584 27 3131 Fax 0584 27 7505 Phone 81 584 27 3131 7 Fax 81 584 27 7505 Mail minoura minoura jp Email minoura minoura jp Web www minoura jp Web www minoura jp Made in Japan
3. BB Fit s B Fit s Light duty Kickstand instructions manual Top Hook 1 Important Notes M6x10 M6 Screw M6x10 Teeth Washer Flat Washer M6 Thin a Installed Style gt M Cover N M6x25 3 Back Plate M6 Screw M6x25 Flat Washer M6 Thick This kickstand is not equipped with a locking Stand Leg NN mecha
4. nism Take care to use the kickstand at a secure angle so the bike stays upright M5 Adjustthe bike angle while parking by cutting Flat Washer M5 Recommended M6 Bolt the leg length correctly for the better stability Do not adjust by bending the kickstand Micro adjusting is done by changing the number of the M5 flat washers between the leg and the cap Tightening Torque 5 Nm 7 Cap Fixing Screw 1 Cap 2 2 3 6 3
Download Pdf Manuals
Related Search