Home

Samsung CS-34Z6HF User Manual

1. v 3D Sound Stereo v Hall Stereo v 4 Off Stereo v v Sound 1 Press the MENU OI button Result main menu is displayed 2 Move the joystick up or down until the Sound is selected Result options available in the Sound group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Surround option is selected and move the joystick left or right Result following surround modes are available Pro Logic 3D Sound Hall Off 5 Select the Pro Logic option in the surround mode Result options available are displayed 6 Move the joystick up or down until the Pro Logic option is selected and move the joystick right 7 Select the required option by moving the joystick left or right Result following options are available Normal Phantom Wide 8 To store the setting press the joystick button C Press the TV button C to return to normal viewing Adjusting Your Dolby Preferences The following D olby settings can be adjusted to suit your personal preferences Volume of the centre and rear speakers Prologic delay time for the rear speakers between 15 and 30 ms Activation deactivation of the test tone to simulate the volume on each speaker 1 Press the MENULITI button Result main menu is displayed 2 Move the joystick up or down until the Sound is selected
2. 22 If the signal received by your television is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen 1 Press the MENU LII button Result The options available in the Picture group are displayed Move the joystick right Move the joystick up or down until the Digital NR option is selected Move the joystick right Result The Digital NR menu is displayed with the current option To Then Change the option Move the joystick left or right Confirm the option Press the joystick button Return to normal viewing Press the TV button Picture Custom Natural scan Off Move AV Enter gt Digital NR 4 9 9 gt Sel lt gt Store 9 Using the Tilt Control Feature If you find that the picture received is slightly tilted to one side you can adjust the tilt setting 1 Press the MENU LII button Result The options available in the Picture group are displayed Move the joystick right Move the joystick up or down until the Tilt option is selected Move the joystick right Result Tilt menu is displayed with the current option To Then Adjust a setting Move the joystick left or right Confirm the setting Press the joystick button C4 Return to normal viewing Press the TV button Picture Scan mode Natural scan Move AV Enter gt Adjust lt gt Store GY
3. 7 COLOUR TELEVISION Owner s Instructions Before operating the unit please read this manual thoroughly and retain it for future reference TELETEXT PICTURE IN PICTURE AV LINK AV TSE D Safety Instructions These illustrations represent precautions concerning your television Do NOT expose the television to Do NOT expose the television to Do NOT expose the television to extreme temperature conditions direct sunlight any liquids below 5 C and above 35 C or to extreme humidity conditions less than 10 and more than 75 If the television is broken do not During a storm conditions If the remote control is not used for try to repair it yourself Contact especially when there is lightning a long period of time remove the qualified service personnel unplug the television from the batteries and store it in a cool dry mains socket and aerial place THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Displaying any stationary images that exceed the long time it can cause uneven aging of picture tubes CRTs that leave subtle but permanent burned in ghost images in the television picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars Caution The lightning flash and arrow head CAUTION within the triangle is a warning sign RISK OF ELECTRIC SHOCK alerting you of dangerou
4. 23 M Function This function is very useful in the situation that the TV is used in weak signal LNA amplifies the TV signal in the weak signal area but not noise This feature is working only weak signal condition and that is memorized on current channel additional 1 Press the button Result main menu is displayed Move the joystick up or down until the Function is selected Result The options available in the Function group are displayed Move the joystick right Move the joystick up or down until the LNA option is selected Result LNA menu is displayed with the current option To Then Change a setting Move the joystick up or down Press the joystick button C Press the TV button Confirm the option Return to normal viewing Setting the Blue Screen Mode If no signal is being received or the signal is very weak a blue screen automatically replaces the noisy picture background If you wish to continue viewing the poor picture you must set the Blue screen mode to Off AV Setup Blue screen lug amp Play 24 Function Press the button Result main menu is displayed Move the joystick up or down until the Function is selected Result The options available in the Function group are displayed Move the joystick right Move the joystick up or down until the Blue screen option is selected To Then Mo
5. Result options available in the Sound group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Surround option is selected and move the joystick right Move AV Sel 4 Store Result Surround menu is displayed with the current option 5 Select the Pro Logic option in the surround mode Result options available are displayed 6 To Then Change a setting Move the joystick up or down Change the option Move the joystick left or right VIA A LI Confirm the changes Press the joystick button C2 Return to normal viewing Press the TV button gt gt Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories 31 Connecting Headphones You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room Plug a set of headphones into the 3 5 mm mini jack socket on the panel of the television Result The sound is heard through the headphones 2 For further details on how to set your headphone preferences refer to the section below gt Prolonged use of headphones at a high volume may damage your hearing Adjusting Your Headphone Preferences Custom Off Off Standard Off Headphone Adjust 4 gt 32 You can adjust the headpho
6. Set tacos Fuse as e o S DUE Setting the Time and Switching the TV On Off Automatically Picture In Picture Feature USING THE TELETEXT FEATURE Telex Stove nee ree te ee Displaying the Teletext Srebrena nnne Selecting Display OPlONS rnrn e e E Selecting a Teletext EAE USING THE AV LINK FEATURE New AV Link Feature Connecting an AV Link VCR Setting Up Your AV Link VCR se tto Sese een Recording Directly via the AV Link Setting the Programmed Record ADDITIONAL INFORMATION ON CONNECTIONS Deciding How to Connect Up Your Audio Video Systems CONNECCION ste v teuer ache ee fot eum Connecting to the Ext 1 2 or 3 SCART Input Outputs Connecting to th RCA e aa FE qae E Connecting to the S Video INDUL ccccceeeeecseeeeeeeeeeeeeeeeeeeeeeaeaeaeeeeseeeeees Connecting to the Audio Output cccccccceeeeeeeeeeeeeeeeeeeeeeeeesaaeaeeeeeeseeeeeess Connecting to the PC Input Option esses Viewin
7. Sub picture is in the TV mode you might not hear the sound of main picture when pressing the SWAP button after changing the sub picture channel At this time reselect the main picture channel Used to move the sub picture counterclockwise Used to select the channel of sub picture Used to select the type of sub picture Large Small Used to freeze the sub picture gt Ifthe PIP is Off the STILL button used to freeze the main picture Used to scan every memorized channel in order To stop scanning press it again Used to view memorized channels to a maximum of 12 on the sub picture spontaneously Used to assign a source of sub picture TV Ext1 Ext2 Ext3 Ext4 STOP a ona REW PLAY PAUSE FF PIP SWAP LOCATE SIZE STILL 2009 y 5 wa 6 A A C 8 9 OO 35 Teletext Feature Most television channels provide a written information service via Teletext Information provided includes Television programme times News bulletins and weather forecasts Sports results Travel information This information is divided into numbered page see diagram Part Contents A Selected page number B Current page number or search indications C Broadcasting channel identity D Date and time E Text F Status information FASTEXT information gt Teletext information is often divided between several pages displayed in sequen
8. TV VIDEO or W C A depending on the model Connection Panel gt gt The actual configuration on your TV may be different depending on your model Rear of TV 1 1 1 1 1 O L l t AUDIO O Cc O jp i o c o REAR SEU 160 OUT TT SPEAKER 80 J1 y REAR eae 16Q I ae am IEEE TTE 80 1 750 750 bbb bbb erc AN LepBELPBEPpLR4ARRRSR CC PEEEEEEESEP VHF UHF VHF UHF ue US anuo ecc ue dobbs DECODER AV DECODER AV link SPEAKER CONNECTORS RCA AUDIO OUTPUT CONNECTORS WOOFER SPEAKER CONNECTOR OPTION CENTER SPEAKER CONNECTORS OPTION FULL RGB AV LINK INPUT OUTPUT CONNECTOR VIDEO S VIDEO INPUT OUTPUT CONNECTOR VIDEO INPUT OUTPUT CONNECTOR RGB 750 COAXIAL CONNECTOR FOR AERIAL CABLE NETWORK Side of TV Front of TV S VIDEO VIDEO MONO L AUDIO R VIDEO4 INPUT RCA AUDIO INPUT CONNECTORS RCA VIDEO INPUT CONNECTOR S VIDEO INPUT CONNECTOR HEADPONE CONNECTOR PC INPUT CONNECTOR OPTION Infrared Remote Control depending on the model AUTOMATIC SWITCH OFF VCR FUNCTIONS STOP REWIND PLAY PAUSE FAST FORWARD TELEVISION STANDBY BUTTON NUMERIC BUTTONS EXTERNAL INPUT SEL
9. UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitable safety approved extension lead or consult your dealer for assistance However if there is no alternative to cutting off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS
10. main menu is displayed 2 Move the joystick up or down until the Channel is selected Result The options available in the Channel group are displayed 3 Movethe joystick right 4 Move the joystick up or down until the Sort option is selected 5 Move the joystick right Result Sort menu is displayed 6 Move the joystick up or down to select the channel that you wish to move Then move the joystick right 7 Move the joystick up or down to select the number of the programme to which the channel is to be moved 8 Move the joystick left Result channel is moved to its new position and all other channels are shifted accordingly 9 Repeat Steps 6 to 8 until you have moved all the channels to the required programme numbers Channel 31 Move AV Enter gt 17 Manual Storing of Channels You can store up to 100 television channels including those received via cable networks W hen storing channels manually you can choose Whether or not to store each of the channels found The programme number by which you wish to identify each stored channel 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Channel is selected Result The options available in the Channel group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Manual store option is selected 5 Move the joystick
11. position using the S MODE button Ifthe stereo signal is weak or if intermittent Stereo Mono and automatic switching occurs then switch to the Mono mode When receiving mono sound in the AV mode connect to the L input jack on the panels If the mono sound comes out only from the left speaker then press the S MODE button 28 Selecting the Sound Standard You can use your remote control to select the type of special sound effect to be used when watching a given broadcast The following sound effects are available TEXTMIX DISPLAY PSIZE___S MODE Custom Standard Music Movie Speech eoe S STD PSTD SCAN MODE To select the required sound effect simply press the S STD button on the remote control ei vou can also set these options via the Adjust option in the Sound group Adjusting the Sound Settings The following settings can be adjusted to suit your personal preferences The following settings are available Audio output Activation deactivation of the internal speakers Volume Balance Equalizer 1 Press the MENULL button Result main menu is displayed E Store 2 Move the joystick up or down until the Sound is selected Result options available in the Sound group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Audio out option is selected 5 Select the your requirement gt If you want to adjust th
12. right Result Manual store menu is displayed Pzog No 6 If necessary indicate the broadcasting standard required by moving the joystick up or down to select the Color system option Sound system followed by moving the joystick left or right The color standards search are displayed in the following order depending on your model Fine tune Auto PAL SECAM Move AV 1 4 Store or Auto NTSC3 58 option NTSC4 43 PAL60 7 Select the Sound system option by moving the joystick or down and followed by moving the joystick left or right The sound Search id standards are displayed in the following order depending on your chanel model Fine tune poe 7 Move AV Sel lt gt Store G 18 Manual Storing of Channels cont 8 Ifyou Then move the joystick Know the number of the up or down to select the channel to be stored Channel option left or right to indicate the required number Do not know the channel up or down to select the numbers Search option left or right to start the search Result tuner scans the frequency range until the first channel or the channel that you selected is received on your screen 9 If reception is weak you can fine tune a channel manually by Selecting the Fine tune option Moving the joystick left or right until the picture and sound are both clear and sharp gt
13. terminals This button is only operational with an AV Link VCR If you have an ordinary VCR it has no effect You must use the Record button on your VCR remote control Check that your AV Link VCR has been correctly connected 51 THIS APPLIANCE IS DISTRIBUTED BY ELECTRONICS AA68 01464A 01 ENG
14. E HER pr PEE om VCR to the television XT gt AV J rprppRER DECODER see pages 44 47 for further details Otherwise connect the decoder directly to the television Using a SCART cable Connect the receiver SCART cable to one of the SCART connectors on the rear of the television see page 44 for further details on the various connection possibilities Decoder U sing a coaxial cable Connect a coaxial cable to the Receiver output socket Television aerial input socket 10 Connecting Additional Speakers If you wish to listen a programme or recording using Dolby Surround you can connect additional speakers The four speaker terminals are located on the rear of the television Two for the left hand speaker marked L Two for the right hand speaker marked R Two for the centre speaker marked C ption To improve the quality of the sound connect the Red wire to the red terminal Black wire to the black terminal 1 To connect a wire to a terminal push the tab back as far as it will go 2 Insert the wire up to the plastic sheathing in the hole 3 Release the tab Result The wire is pinched and held firmly in place 4 Repeat the operation for each wire 5 Connect the other end of the wires to the loudspeakers OPTION Rear of the TV Inserting the Bat
15. ECTING a 10 m Connecting Additional Speakers 11 m Inserting the Batteries in the Remote 11 m Switching Your Television On and 12 m Placing Your Television in Standby 12 m Becoming Familiar with the Remote Control cccseeseseeeeeeeeeeeeeeeeneeeeees 13 el Fz et M E 14 m Choosing Your Language auti e octo ete 15 SETTING THE CHANNELS m Automatic Storing of Channels eere eink ee 16 m Sorting the Stored Channels ccccccccssseseececeeeeeeeeseeaaeeeeeeeeeeeeeeessaeaaeeeeees 17 m Manual Storing of Channels cccccccssesssseceeceeeeeeecaeseeeseeeeeeeeeeeesseeeaeaeeeees 18 m Assigning Names to Channels cccccccssseeeeeeeeeseeeeeeeseeaeeeeeeeesseeeaeeeeeeeneas 20 m Activating the Child Lock and Skipping unwanted channels 21 m Selecting a Channel by nten 22 USING YOUR TELEVISION m Changing the Scan 22 m Activating Deactivating the Digital Noise Reduction Feature 23 m Using the Tilt Control Featu
16. ECTION TEMPORARY SOUND SWITCH OFF NEXT CHANNEL TELETEXT NEXT PAGE VOLUME DECREASE TELETEXT SUB PAGE ON SCREEN DISPLAY TELETEXT REVEAL TELETEXT DISPLAY MIX INFORMATION DISPLAY FASTEXT TOPIC SELECTION SOUND STANDARD SELECTION 4 E DISPLAY PSIZE___ SMODE RO P STD SCAN MODE SLEEP STOP REW PLAY PAUSE F ap D CD PIP SWAP LOCATE e SIZE STILL SCAN MULTI TV VIDEO INFO S STD I II AV LINK VCR STOP AV LINK VCR RECORD PIP FUNCTIONS OPTION PIP ON SWAP LOCATE SIZE SETTING STILL SCAN CHANNEL SELECTION P MULTI PIP SOURCE SELECTION TV VIDEO gt gt Ifthe PIP is Off the STILL button used to freeze the main picture MAKE THE REMOTE CONTROL WORKS FOR TV VCR CABLE DVD PLAYER TUNER CABLE NETWORK SELECTION MENU DISPLAY PROGRAMME SELECTION BY NAME CONTROL THE CURSOR IN THE MENU VOLUME INCREASE CHANGE CONFIRMATION PREVIOUS CHANNEL TELETEXT PREVIOUS PAGE PICTURE SIZE TELETEXT SIZE SOUND MODE SELECTION TELETEXT CANCEL SCAN MODE SELECTION PICTURE STANDARD SELECTION 2 It is possible that the work of the transmitter is dull or not operated normally if the light of the Bulb is on around the TV set Connecting to an Aerial or Cable Television Network To view television channels correctly a signal must be recei
17. MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW 50 Troubleshooting Before Contacting Service Personnel Before contacting Samsung after sales service perform the following simple checks If you cannot solve the problem using the instructions below note the model and serial number of the television and contact your local dealer No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or snowy picture distorted sound Remote control malfunctions The Record button does not work 9 99 O OF eo Check that the mains lead has been connected to a wall socket Check that you have pressed the ON OFF button and the POWER button 5 Check the picture contrast and brightness settings Check the volume Check the volume Check whether the volume MUTE button XX has been pressed on the remote control Adjust the colour settings Check that the broadcast system selected is correct Try to identify the electrical appliance that is affecting the television and move it further away Plug your television into a different mains socket Check the direction location and connections of your aerial This interference is often due to the use of an indoor aerial Replace the remote control batteries Clean the upper edge of the remote control transmission window Check the battery
18. SSMODE Goog Custom Standard Sports Mild Natural INFO S STD PSTD SCAN MODE Y Q D To select the required picture effect simply press the P STD button on the remote control Wi You can also set these options via the Adjust option in the Picture group If you change the Color tone Brightness Color Contrast Sharpness Or Tint NTSC only settings on the Picture menu the Custom option is selected automatically Adjusting the Picture Settings Your television has several settings which allow you to control picture quality Pict Color tone Brightness Color Contrast Sharpness Tint NTSC only 1 Press the button Result The options available in the Picture group are displayed 2 Move the joystick right Result Adjust option is selected 3 Move the joystick right again Result Adjust menu is displayed with the current option 4 Move the joystick up or down to select the option to be adjusted 5 the Then move the joystick Move AV Sel lt gt Store Color tone right until the required option Normal Warml 2 or Cooll 2 is displayed Brightness right Color Result A horizontal bar is displayed Contrast left or right until you reach the Sharpness setting Tint NTSC only 6 When you are satisfied with the settings press the joystick button C to store them 7 When you hav
19. Youcan ignore any changes made and return to the previous setting by pressing the green button Ifyou are unable to fine tune a channel check that the Color system and Sound system settings are correct 10 To assign a programme number to a channel select the Prog No option Move the joystick left or right until you find the correct number 11 To store the channel and associated programme number press the joystick button C 12 Repeat Steps 8 to 11 for each channel to be stored Manual store Fine tune Move AV Sel lt gt Store Manual store Color system AUTO Sound system Fine tune Move AV Enter gt Store Manual store Fine tune Move Adjust 4b Store Manual store Color system AUTO Sound system Fine tune Move AV Sel lt gt Store 19 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast These names can be changed allowing you to assign new names 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Channel is selected Result The options available in the Channel group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Name option is selected 5 Move the joystick right Result Name menu is displayed with the current channel automatically selected _ 6 If necessary
20. al output Aerial input 40 To connect an AV Link VCR to your television you must use a SCART cable 1 Plug the aerial inout cable into the appropriate socket on the VCR 2 Connect one end of the SCART cable to the AV Link EXT1 socket on the rear of the television gt You can only use the EXT1 socket on your television to connect the AV Link VCR 3 Connect the other end of the SCART cable to the appropriate AV Link SCART socket on the VCR 4 Select the EXT1 option and download the preset channels from your television to your VCR by following the indications on page 41 gt As the 1 connection always receives the actual TV tuner signal you do not need to tune your VCR to your television as with a standard VCR Setting Up Your AV Link VCR The connection between your television and the AV Link VCR through the EXT 1 socket refer to the opposite page enables you to set up your AV Link VCR automatically from your television via the on screen menus 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Function is selected Result options available in the Function group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Setup option is S selected LLLI lug amp Play 5 Move the joystick r
21. ately after the first Failure to do this will result in a single digit channel being displayed Used to increase the volume TEXT MIX EU S PSIZE zo Used to reduce the cM OF G gt volume p S STD PSTD SCAN MODE rae oeeo Display a submenu 4 containing selections for the current menu option Search forwards backwards manually for channels Increase reduce a menu option value Used to confirm your choice Used to display the Used to return to the previous on screen menu system menu or normal viewing 0 to Used to display the Used to display the corresponding channels corresponding channel directly TV Used to switch the Used to exit the menu system CJ television on when it is and return to normal viewing in Standby mode directly 13 Plug and Play W hen the television is initially powered O N several basic customer settings proceed automatically and subsequently The follwing settings are available 1 Ifthe television is in Standby mode press the POWER button C on the remote control Result message Plug amp Play is displayed It flickers for a little while and then the Language menu is automatically displayed 2 Select the appropriate language by moving the joystick up or down 3 Press the joystick button C to confirm your choice Result message Antenna input check is displayed 4 Make sure that the antenna is connected to the TV and then press t
22. button C4 gt The setting information is transferred to the VCR Return to normal viewing Press the TV button gt Youcan decrease or increase the value of the Prog No respectively by moving the joystick left or right The data is displayed as follows Day Month 43 Deciding How to Connect Up Your Audio Video Systems You must take into account several factors when deciding how to connect your audio and or video systems These are The types of connectors available on your systems Systems connected permanently to the television VCR for example or temporary camcorder for example 2 Your television is equipped with the following connectors Connector Location Type Direction Recommended Use Ext1 or oe Full RGB In Out AV Link VCR SCART C3 Satellite receiver Game console RGB usually required Video disc player RGB usually required 2 VCR d or i S Video Ext3 oco SCART In Out VCR iu Video or Decoder RGB Ext4 Side RCA In Camcorder depending _A amp on the model r3 Front Side S Video In Camcorder with S Video output audio uo LA E 750 Rear Coaxial In Aerial or cable television network LA 80 VCR to which an aerial or cable television network is connected AUDIO OUT Rear RCA Out Fixed or volume controlled signal depending eo You can select in t
23. ce which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system 36 Displaying the Teletext Screen You can display Teletext information at any time on your television eg For Teletext information to be displayed correctly channel reception must be stable otherwise Information may be missing Some pages may not be displayed To activate the Teletext mode and display the contents page follow the instructions below 1 Select the channel providing the Teletext service using the PAN or PV 0 buttons or the VIDEO button 3 2 Press the TEXT MIX button to activate the Teletext mode Result contents page is displayed E 3 PSIZE zo 8 emo S STD PSTD a 3 If you wish to display the actual broadcast at the same time as the Teletext page press the TEXT MIX button again 4 When you have finished press the TV button to continue viewing normally gt gt message box containing the words No Text Transmission will be displayed if the selected channel does not carry a Teletext signal 37 Selecting Display Options W hen you have displayed a Teletext page you can select various Q O pou P CN ODE 38 2 options to suit your requirements To display Both the Teletext information and the normal broadcast Hidden text answ
24. ch on automatically and tune to the channel of your choice at the time you select Switch off automatically at the time you select Im Bie screen 1 Press the button Result main menu is displayed _ 2 Move the joystick up or down until the Function is selected Move the joystick right Result options available in the Function group are displayed e xu P m MU UM timer 3 Move the joystick up or down until the Time option is selected Move the joystick right Result The Time menu is displayed with the Clock option EM selected Set the Clock by pressing the numeric buttons Move the joystick up or down to select the Timer Then select to on by moving the joystick left or right for switching on off automatically 6 Select the On time by moving the joystick up or down followed by pressing the numeric buttons to switch on automatically 7 In the same way set the off time to switch off automatically 2 Theclock setting will be re activated when pressing Q O N O FF button on the front panel 33 Picture In Picture Feature Option You can display a Picture In Picture screen within the main picture of TV program or Video input In this way you can watch or monitor TV program or the Video input from any connected zs equipment while watching TV or other Video input tv video For information about connection o
25. ctions supplied with your VCR to tune the VCR to your television Rear of the TV PEPE EERE Emn bA aa a Da DA a A LELEL ALI VCR a Li Li Li Li m Li Li Li Li Aerial output Aerial input Connecting a Satellite Receiver In order to watch television programmes broadcast via a satellite network you must connect a satellite receiver to the TV set Rear of the TV gt if you wish to connect both a satellite receiver and a VCR you should connect the eae Receiver to the VCR un PEPEEEPEES em VCR to the television Ge AV DECODER see pages 44 47 for further details Otherwise connect the receiver directly to the television Using a SCART cable Connect the receiver SCART cable to one of the SCART connectors on the rear of the television see page 44 for further details on the various connection possibilities Satellite receiver U sing a coaxial cable Connect a coaxial cable to the Receiver output socket Television aerial input socket Connecting a Decoder In order to descramble a coded transmission signal you must connect a decoder to the TV set Rear of the TV gt if you wish to connect both a decoder and a VCR you should connect the emca Decoder to the VCR PE
26. e Corresponding colored button Subpage if button gt available subpages are appeared 2 Select the required subpage 4 When you have finished press the TV button again to return to your normal broadcast 39 New AV Link Feature STOP REW PLAY PAUSE FF i Your television is equipped with an AV Link feature D ata received on your television can be directly transferred to an AV Link equipped VCR Devices connected via AV Link can exchange information W YSIW YR Principle The WYSIW YR What You See Is What You Record principle means that you can start recording on your VCR a programme that you are currently watching on your TV simply by pressing the AV Link Record button on the remote control Example If you have selected programme 3 on your TV this programme number is sent to the VCR and the VCR starts recording the corresponding broadcast on its own tuner Advantages You can record a programme without having to Switch on the VCR Select the same programme on the VCR Start recording by pressing the record button on the VCR remote control Automatic Channel Downloading The AV Link feature also allows the channels to be automatically downloaded from the TV to the VCR Connecting an AV Link VCR Rear of the TV Ex pbb bb bb ver deeded DECODER Aeri
27. e finished press the TV button C3 to return to normal viewing 26 Adjusting the Volume You can adjust the volume using your remote control TO hold down the Increase the volume button Result A horizontal bar is displayed and the volume increases until you release the button The cursor moves to the right to indicate the volume Decrease the volume button Result A horizontal bar is displayed and the volume decreases until you release the button The cursor moves to the volume H left to indicate the volume gt Additional sound adjustments are available on your television For further details refer to pages 27 to 32 Adjusting the Volume Automatically Each broadcasting station has its own signal conditions and so it is not easy for you to adjust the volume every time the channel is changed Auto volume lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Auto volume 1 Press the MENULITI button mmt mte Result main menu is displayed 2 Move the joystick up or down until the Sound is selected Result options available in the Sound group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Auto volume option is selected 5 Select the required option by movin
28. e volume level with the volume control on the TV set to Volume When set to Standard you can adjust the volume level with the volume control on the audio amplifier Adjust Custom 6 If you wish to silence the internal speakers set the Int mute to On 7 Move the joystick or down until the Adjust option is selected and move the joystick right Result Adjust menu is displayed with the current option volume balance and equalizer 1k Adjust AV Move lt gt Store 8 Adjust to suit your personal preferences gj it you make any changes to the Adjust settings the sound standard is automatically switched to Custom 29 Setting the Dolby Pro logic Rear of TV depending on the model A AUDIO woorts REAR SPEAKER 160 OUT CENTER SPEAKER 80 O R O QOQ L Q L R REAR SPEAKER 160 AUDIO OUT CENTER SPEAKER 80 Surround Enter gt Store Pro Logic Sel 4 Store 30 The Dolby mode allows you enjoy Dolby prologic surround effect fully with only surround speakers are connected to TV This allows various modes for the main center and rear speakers to be selected Surround Mode Input Signal Speakers Main Centre Rear Pro Logic Normal Stereo v Mono v Phantom Stereo Wide Stereo
29. equired channel by pressing the PAN PWV or VIDEO buttons amp Result The selected channel is displayed on the TV screen 2 To start recording this channel press the AV ILink Record button e Result Recording will stop only when reaching the end of the cassette tape 3 stop recording press the AV link Stop button m on the remote control TEXTMIX DISPLAY PSIZE___S MODE 2 42 Setting the Programmed Record Timer At any time you can set the timer options to record a programme automatically on your AV Link VCR 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Function is selected Result The options available in the Function group are displayed 3 Move the joystick right 4 Move the joystick up or down until the AV Setup option is AV Link PUB Finer Programing 5 Move the joystick right Result AV Setup menu is displayed with the EXT1 option selected 6 the joystick right again ne Result The AV Link menu is displayed with the Timer programming Option selected 7 Move the joystick right again Timer Result The Timer menu is displayed with the Prog No ca option selected pate 8 Then XH 00 00 Select the option Move the joystick up or down Move AY Adjust 0 9 Start Change a setting Press the numeric buttons Confirm the changes Press the joystick
30. er connectors on the rear of the television or connect an audio system to the AUDIO OUT connectors on the rear of the television W henever you connect an audio or video system to your television ensure that all elements are switched off Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions 45 Connecting to the Ext 1 2 or 3 SCART Input Outputs gt Ext is used for equipment with an RGB output such as video game devices and video disc players or a VCR with the AV Link feature VOR IE 2012 AV Link VCR Ext 1 only Rear of the TV E Decoder Ext 1 2 or 3 enc Tm video game device bbb VCR Ext 1 3 Se suc bbb enc AV 444 DECODER AV link Video disc player Ext 1 3 D This end can be fitted with Satellite receiver A SCART connector Ext 1 2 or 3 AnS Video connector and two audio RCA connectors L R Ext 1 2 Three RCA connectors video audio L and R Connecting to the RCA Input depending on the model gt RCA AUDIO L R VIDEO connectors are used for equipment such as camcorders video disc players and some video game devices Side of the TV Camcorder LA HM RUDI MONO qm Video disc player VIDEO4 INPUT Front of the TV VIDEO MONO L AUDIO R Video game device 46 Connecting to the S Video Inp
31. ers to quiz games for example The screen normally again A secondary page by entering its number The broadcast when searching for a page The next page The previous page In letters the upper or lower half of the page Toa full page Press the TEXT MIX reveal reveal again 9 PA PWV 15 size repeatedly gt gt return to the normal display after using the reveal or size features press the TV button again Selecting a Teletext Page You can enter the page number directly by pressing the numeric buttons on the remote control 1 Enter the three digit page number given in the contents by pressing the corresponding numeric buttons Result The current page number is incremented until the requested page is reached That page is then displayed If the selected page is linked with several secondary pages the secondary pages are displayed in turn 2 If the FASTEXT system is used by the broadcasting company the different topics covered on a Teletext page are color coded and can be selected by pressing the coloured buttons on the remote control Press the coloured button corresponding to the topic that you wish TES LAS SE to select the available topics are given on the status line Result The page is displayed with other colored information SSTD PSTD SCAN MODE that can be selected in the same way 3 To display the Press the Previous Next pag
32. es or areas available are listed 5 Move the joystick up or down to select your country gt f you have selected the Others option but do not wish to scan the PAL frequency range store the channels manually see page 18 6 Press the joystick button C to confirm your choice 7 Press the MENULLU button Result The options available in the Channel group are displayed again 8 Move the joystick up or down to select the ATM or Auto store 9 Move the joystick right Result ATM or Auto store menu is displayed 10 Press the joystick button C94 to start the search Result search will end automatically Channels are sorted and stored in an order which reflacts their position in the frequency range with lowest first and highest last The programme originally selected is then displayed gt stop the search before it has finished press the TV button Auto store 11 When the channels have been stored you can d rir aim Fine tune channel reception if necessary see page 19 Assign a name to the stored channels see page 20 Activate deactivate the Digital Noise Reduction feature see page 23 16 Sorting the Stored Channels The Sort operation allows you to change the programme numbers of stored channels This operation may be necessary after using ATM You can delete those channels you do not want to keep 1 Press the MENU button Result
33. f other equipment refer to pages 46 and 47 rog No Lal 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the PIP is selected Result options available in the PIP group are displayed 3 Move the joystick right To activate the PIP feature set the PIP to on by moving the joystick left or right H a o N Q z 5 Move the joystick up or down to select the TV VIDEO option Then select a source of the sub picture by moving the joystick left or right The sources are displayed in the following order uo E 6 To interchange the main picture and the sub picture select the Swap option and move the joystick right EERE 7 Move the joystick up or down to select the Size option Then select a size of the sub to Large or Small by moving the joystick left or right 8 Move the joystick up or down to select the Prog No option You can select the channel that you want to view through sub picture by moving the joystick left or right 9 To return to normal viewing press the TV button 34 Picture In Picture Feature Option Remote control functions while PIP is O n Features PIP ON SWAP LOCATE P V A SIZE STILL SCAN MULTI TV VIDEO Description Used to operate ON OFF function of PIP directly Used to interchange the main picture and the sub picture gt When the main picture is in the Video mode and the
34. g Pictures From External Sources Redirecting an Input to the Ext 2 or Ext SCART Connector Wiring Ext 1 Ext 2 or Ext RECOMMENDATIONS FOR USE Wiring the Mains Power Supply Plug UK Troubleshooting Before Contacting Service Personnel Symbols 40 40 41 42 43 of bon Press Push Hold down Important Note Control Panels gt gt The actual configuration on your TV may be different depending on your model LOCAL TWVIDEO MENU 24 WC P OA LOCAL TV VIDEO MENU Oo 0 a WC P OA D m EN T STAND BY 000 C gt LOCAL A VCPOA MENU STAND BY e LOCAL VCROA MENU TV VIDEO SELECTION ACCESS TO LOCAL MENU VOLUME ADJUSTMENT CHANNEL SELECTION 2 sing the Buttons on the Panel LOCAL Q MENU EM A H POWER STAND BY INDICATOR REMOTE CONROL SENSOR If the remote control no longer works or you have lost it you can use controls on the panel of the television to Switch on the television when itis in Standby mode and select channels W C P 5A Access the local menu LO CAL MENU Adjust the volume a Switch among Video inpt modes
35. g the joystick left or right 6 Press the TV button C to return to normal viewing 27 Switching the Sound Off Temporarily You can switch the sound off temporarily Example You wish to answer the telephone 1 Press the MUTE button on the remote control Result sound is switched off and is displayed 2 When you wish to turn the sound back on press the MUTE button again or either of the volume buttons Result sound comes back on at the same volume as before and the indication disappears Selecting the Sound Mode depending on the model The S MODE button displays controls the processing and output of the audio signal When power is switched ON the mode is automatically preset to either D ual or Stereo depending on the current transmission wende fria l Regular broadcast Standard audio Mono Normal use TEXTMIX DISPLAY PSIZE___S MODE I iE ere e e INFO 5 5709 PSTD SCAN MODE oeeo Mono lt gt Mono Regular NICAM NICAM Mono Nicam Normal Stereo Stereo lt gt Mono NICAM Stereo Nicam Normal Dual I gt Dual II Mono Nicam Nicam Normal 2 Regular broadcast Standard audio Mono Normal use A2 Stereo NICAM Dual I II Bilingual or Dual T II Dual I lt gt Dual II Stereo lt gt Mono gt gt Ifthe receiving conditions deteriorate listening will be easier if the mode is set to the Mono
36. guage When you start using your television for the first time you must select the language which will be used for displaying menus and indications 1 Press the MENU LLU button Result main menu is displayed 2 Move the joystick up or down until the Function is selected Result options available in the Function group are displayed 3 Move the joystick right Result Language option is selected 4 Move the joystick right again Result languages available are listed 5 Move the joystick up or down until the appropriate language is selected Press the joystick button C4 to confirm your choice 7 When you are satisfied with your choice press the TV button to return to normal viewing Enter gt 15 Automatic Storing of Channels You can scan for the frequency ranges available to you availability depends on your country Automatically allocated programme numbers may not correspond to actual or desired programme numbers H owever you can sort numbers manually and clear any channels you do not wish to watch see pages 17 18 for further details 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Channel is selected Result The options available in the Channel group are displayed 3 Move the joystick right Result Country or Area option is selected 4 Move the joystick right again Result countri
37. he joystick button Result Country or Area menu is displayed depending on the model 5 Select your country or area by moving the joystick up or down 6 Press the joystick button C to confirm your choice Result The ATM or Auto store menu is displayed depending on the model 7 Tostartthe search press the joystick button Result search will end automatically Channels are sorted and stored in an order which reflacts their position in the frequency range with lowest first and highest last The programme originally selected is then displayed gt stop the search before it has finished or return to normal viewing press the TV button 8 When it has finished the message Enjoy viewing your new TV is displayed and then the channel which has been stored will be activated 14 Plug and Play cont If you want to reset this feature 1 Press the button Result main menu is displayed Move the joystick up or down until the Function is selected Result The options available in the Function group are displayed Move the joystick right Move the joystick up or down until the Plug amp Play option is selected Move the joystick right Result message Plug amp Play is displayed For further details on how to set refer to the opposite page Function Y AV Setup lug amp Play Move AV Enter gt Choosing Your Lan
38. he on screen menu on the model or PC INPUT Side In VGA 640 x 480 pixels Option ps 44 Connection Tips Here are a few hints and tips to help you decide which systems should be connected to the various connectors System VCR AV Link VCR Satellite receiver Game console Video disc player S Video or Hi 8 camcorder Audio system Hints and Tips For best results use preferably a SCART or S Video cable in addition to a coaxial cable to have better quality pictures via the tuner If you also have a decoder connect the decoder to the VCR and the VCR to the television If you have a second VCR and wish to copy cassettes tape connect the source VCR to Ext 1 and the target VCR to Ext 2 so that you can redirect the signal from Ext 1 to Ext 2 see page 48 for further details Use a SCART cable only If you have a second VCR and wish to copy cassettes tape proceed in the same way as with a standard VCR Connect the receiver to Ext 1 and the VCR to Ext 2 so that you can redirect the signal from Ext 1 to Ext 2 when you wish to record a programme see page 48 for further details Connect these systems to Ext 1 or Ext 3 as it accepts the RGB signals often output by them Plug the camcorder into the AV connectors on the panel of the television S VIDEO connector and two audio RCA connectors To take advantage of the Surround sound system connect additional speakers to the loudspeak
39. ight Result The AV Setup menu is displayed with the EXT1 option selected Enter gt 6 Move the joystick right again Result AV Link menu is displayed with the current option AV Setup 7 Then move the joystick Transfer the preset channel up or down to select the Sem tuning information from Preset Download option the TV to the VCR left or right to start Indicate that every up down to select the programming change Auto Preset option from the TV set is to be left or right to select On transferred to the VCR AV Link Indicate that you connected up or down to select the a decoder to your VCR to Decoder on VCR option unscramble encrypted channels left or right to select On OFF Decoder on VCR Off 8 To return to normal viewing press the TV button Move AV Start lt gt 41 Recording Directly via the AV Link Feature The AV Link feature allows you to start recording on your VCR the programme you are watching on your TV simply by pressing the AV Link Record button on the remote control If you are recording a source that is not directly SEPN A available on the VCR s tuner a signal from a decoder c or input via the front AV connections for example STOP REW PLAY PAUSE FF if Ou try to change Cu J C O a Warning message appears if y e t channels or switch your TV to the standby mode for example 1 Select the r
40. ne settings to suit your preferences The following headphone settings are available Volume Bass Treble Balance 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Sound is selected Result options available in the Sound group are displayed 3 Move the joystick right 4 Move the joystick up or down until the Headphone option is selected Move the joystick right Result Headphone menu is displayed 5 To Then Change the option Move the joystick up or down Change a setting Move the joystick left or right Confirm the changes Press the joystick button C4 Return to normal viewing Press the TV button Setting the Sleep Timer You can select a time period of between 15 and 180 minutes after which the television automatically switches to Standby mode 1 Press the SLEEP button Result Sleep Timer menu is displayed SLEEP A 2 Move the joystick left or right to select the number of minutes after m Co which the television switches to Standby STOP REW PLAY PAUSE D amp D D 3 the joystick button CS to confirm your selection 4 Press the TV button to return to normal viewing Sleep timer 4 os 305 p Setting the Time and Switching the TV On Off Automatically You can set the television s clock and set the O n O ff timers so that the television will Functi Swit
41. ption is selected 5 Move the joystick right Result Channel edit menu is displayed with the current channel automatically selected 6 Move the joystick up or down to select the number of the programme to which the channel is to be locked 7 Move the joystick right 8 To Lock the channel Unlock the channel 9 Move the joystick right 10 To Erase the channel Add the channel Then Select On Press the joystick button C4 Result The channel is locked Select Off Press the joystick button C4 Hesult The channel is unlocked Then Select Erased Press the joystick button Hesult The channel is erased Select Added Press the joystick button Result The channel is added 11 Press the TV button to return to normal viewing Channel E E 1 gt Move AV Enter gt Channel edit Child Lock A v Channel edit Add Erase A v 21 Selecting a Channel by Informations You can display the list of stored channels TEXTMIX DISPLAY PSIZE___S MODE Gee o 1 Press the INFO button ps SSTD PSTD Result list is displayed with the first 13 channels Two text boxes to the right of the list indicate Qe Whether the Teletext feature is available Which sound mode is being used 2 To Then Scroll through the Move the joystick up or down
42. re sess 23 m Using the LNA Low Noise Amplifier Feature 24 m Setting the Blue Screen 24 m Selectingthe PICtUre SiZ i 25 m Changing the Picture Standard 26 m Adjusting the Picture Settings ssseseeeseeseeeneeenenenenenn 26 m Adjusting the nennen nennen 27 m Adjusting the Volume Automatically nnn 27 m Switching the Sound Off 28 m Selecting the Sond ModE 28 m Selecting the Sound 5 1 4 29 m Adjusting the Sound Settings ssssssessesessssseeeeeeenennnnnnns 29 Contents cont USING YOUR TELEVISION cont Seting the Dolby Pro o9iO eE des Adjusting Your Dolby Preferencess cccccssssseeeccecceeeeeeeeecasaeeeeeessauaaeeeeess Connecting Adjusting Your Headphone Preferences SEUNG the Sleep
43. s voltage DO NOT OPEN inside the product CAUTION To PREVENT ELECTRICAL SHOCK DO NOT REMOVE REAR COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED you of important instructions SERVICE PERSONNEL accompanying the product triangle is a warning sign alerting The exclamation point within the WARNING TO PREVENT DAMAGE WHICH MAY 8 main voltage is indicated on the rear of RESULT IN FIRE OR SHOCK HAZARD DO NOT EXPOSE the TV set and the frequency is 50 or 60Hz THIS APPLIANCE TO RAIN OR MOISTURE Mode System CW WS PAL B G D K SECAM B G DKK L L NTSC4 43 2 PAL B G D K SECAM BIG DIK NTSC4 43 3 58 Thank you for buying a SAMSUNG television Please take the time to read these instructions as they will help you to operate your television with ease Contents FOREWORD Sally Instr ctloriS sequo diesen b niu i onan Eo UM Meu ics 2 EE EA 2 CONNECTING AND PREPARING YOUR TELEVISION MESS Nu UOTE TUM 5 Golheclom uut ERR E EC nie ee C La REN mu te 6 m Infrared Remote Control nennen nnns 7 m Connecting to an Aerial or Cable Television Network 8 m Connecting a non AV Link VCR esses eee nnne 9 m Connecting a Satellite 10 m CONN
44. se the language in which the menus are to be displayed see page 14 4 switch your television off press the ON OFF button again Placing Your Television in Standby Mode Your television can be placed in Standby mode in order to reduce Power consumption Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER button Q5 on the remote control Result screen is turned off and a red Standby indicator appears on the front of the television 2 To switch the television back on simply press the POWER button CD again or a number button gt Do notleave your television in Standby mode for long periods of time when you are away on holiday for example Turn your television off by pressing the ON OFF button CD on the front of the television Itis best to unplug the set from the mains and aerial 12 Becoming Familiar with the Remote Control The remote control is used mainly to Change channels and adjust the volume Setup the television using the on screen menu system The following table presents the most frequently used buttons and their functions Button Viewing Function Menu Function 5 P N Used to display the next stored channel Used to display the previous stored channel gt For double digit channels the second digit must be pushed immedi
45. select the channel to be assigned a new name by moving the joystick up or down 7 Move the joystick right Result Arrow indications are displayed around the name box 8 Then move the joystick Select a letter number or symbol up or down Move on the next letter right zu Move back the previous letter left gt characters available are Letters of the alphabet A Z Numbers 0 9 Special characters space 9 When you have finished entering the name press the joystick button C4 to confirm the name 10 Press the TV button to return to normal viewing 20 Activating the child lock You can restrict viewing by locking the channels of your choice For example you can prevent your children from watching unsuitable programmes Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation When you scan through the stored channels those that you have chosen to skip are thus not displayed All channels that you do not specifically choose to skip are displayed during scanning 1 Press the button Result main menu is displayed 2 Move the joystick up or down until the Channel is selected Result The options available in the Channel group are displayed 3 Move the joystick right Result Channel menu is displayed 4 Move the joystick up or down until the Channel edit o
46. splayed Decoder Out Enter gt 3 Move the joystick right 4 Move the joystick up or down until the AV Setup option is selected Ext 2 Out 5 Move the joystick right 2 E i 1 Result AV Setup menu is displayed 4 ExT to mxr gt 6 Select the required output Ext 2 or Ext 3 and move the joystick right 7 Select the source to be directed to the output and press the joystick button to confirm the change 8 Press the TV button to return to normal viewing 2 Whena standard VCR is plugged into the EXT1 connector the following option is displayed 49 SCART Connector Wiring Ext 1 Ext 2 or Ext 3 If you wish to connect other equipment via the SCART connectors on your television contact your dealer or a qualified technician to wire the A V cable as illustrated below Pin Signal Pin Signal 1 Audio output R 12 2 Audio input R 13 Video chassis return RGB red 3 Audio output L 14 4 Audio chassis return 15 RGB red input 5 Video chassis return RGB blue 16 Blanking signal RGB switching 6 Audio input L 17 Video chassis return 7 RGB blue input 18 Blanking signal ground 8 Switching voltage 19 Video output 9 Video chassis return RGB green 20 Video input 10 AV Link Ext 1 21 Screening chassis return 11 RGB green input gt Pins 5 7 9 11 13 15 and 16 are used for RGB processing and are only wired on the EXT1 or EXT3 connector Wiring the Mains Power Supply Plug
47. stored channels Result corresponding channel is Information displayed Select a specific Press the TV button channel Result The corresponding channel is displayed and the Information 3 KBS box disappears gt External inputs can be displayed and scrolled through in the same way You can display the name of the channel or input by pressing the DISPLAY button Changing the Scan Mode You will normally find that scan mode is best set to on to reduce any slight picture filcker H owever it is possible that some Picture occasional broadcasts may benefit by changing the scan mode The following scan modes are available depending on the model Natural scan Digital scan Progressive 1 Press the MENULLU button Result The options available in the Picture group are displayed 2 Move the joystick right 3 Move the joystick up or down until the Scan mode option is selected Move the joystick right Result The Scan mode menu is displayed with the current Scan mode scan gt Sel lt gt Store option 4 To Then TEXTMIX DISPLAY PSIZE _ S MODE t3 Change the option Move the joystick left or right er eee BD Confirm the option Press the joystick button C x Q E ON Return to normal viewing Press the TV button O You can also set these options by simple pressing the SCAN MODE button on the remote control
48. teries in the Remote Control You must insert or replace the batteries in the remote control when you Purchase the television Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it 2 Insert two R03 UM4 AAA 1 5V or equivalent batteries taking care to respect the polarities onthe battery against on the remote control onthe battery against on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place gt Do not mix battery types i e alkaline and monganese 11 Switching Your Television On and Off The mains lead is attached to the rear of your television ei you have purchased this television in the U nited Kingdom refer to page 50 for further instructions on plug wiring 1 Plug the mains lead into an appropriate socket gt gt The main voltage is indicated on the rear of the TV and the frequency is 50 or 60Hz 2 Press the ON OFF button CD on the front of the television Result Standby indicator lights up on the front panel 3 Press the POWER button Q5 on the remote control to switch the television on Result The programme that you were watching last is re selected automatically gt When you switch the television on for the very first time you will be asked to choo
49. ut depending on the model gt The S VIDEO RCA AUDIO L R connectors are used for equipment with an S Video output such as a camcorder or VCR Side of the TV MS LN Camcorder Eu S VIDEO MONO L AUDIO R gt AUDIO OUT RCA connectors are used for equipment such as an audio system to take full advantage of the Surround sound effect Rear of the TV Audio system gt See the page 30 for further details on Setting the Dolby Preferences 47 Connecting to the PC Input Option gt The PC INPUT RCA AUDIO L R connectors are used for interfacing with your Side of the TV Personal Computer gt Set up Your PC Software Windows only The Windows display settings for a typical computer are shown below But the actual screens on your PC will probably be different depending upon your particular version of Windows and your particular video card But even if your actual screens look different the same basic set up information will apply in almost all cases If not contact your computer manufacturer or Samsung Dealer lg d gs Ee cm umm gt T While Settings is highlighted move the cursor so that Control Panel is highlighted i When the control panel screen appears click on Display and a display dialog bo
50. ve the joystick right Press the TV button Change the option Return to normal viewing Selecting the Picture Size You can select the picture format which best corresponds to your viewing requirements The following picture formats are available depending on the model Picture Auto wide Panorama 16 9 4 3 Zoom1 Zoom2 Normal 16 9 Zoom 1 Press the button Result The options available in the Picture group are displayed Move AV Enter gt 2 Move the joystick right 3 Move the joystick up or down until the Size option is selected SEE Move the joystick right Result Size menu is displayed with the current option 4 Then Change a setting Move the joystick left or right Result The picture is changed VGA Mode accordingly ___ 7 Confirm the option Press the joystick button C x 4 _ s gt Return to normal viewing Press the TV button Store Exit TV eg if the PC is connected you can adjust the VGA mode by moving the joystick up down left or right i You can also select these options by simple pressing the Ec PSIZE zo P SIZE button on the remote control S STD oe LEES 25 Changing the Picture Standard You can use your remote control to select the type of picture which best corresponds to your viewing requirements The following picture effects are available TEXTMIX DISPLAY PSIZE _
51. ved by the set from one of the following sources outdoor aerial cable television network A satellite network see page 10 for further details 1 In the first three cases connect the aerial or network input cable to the 75Q coaxial socket on the rear of the television Rear of the TV 2 If you are using an indoor aerial you may need to turn it when D tuning your television until you obtain a picture that is both sharp and clear For further details refer to diia Automatic Storing of Channels on page 16 Cable Television Manual Storing of Channels on page 18 Network gt If you wish to subscribe to a cable network contact your local dealer Connecting a non AV Link VCR You can connect a VCR to the television using a Coaxial cable SCART cable S Video cable 1 Plug the aerial input cable into the appropriate socket on the VCR 2 Connect a coaxial cable to the VCR aerial output socket Television aerial input socket 3 To obtain better picture quality and in addition simplify the setting up procedure of the VCR you can connect a SCART cable between The AV SCART socket on the VCR and ASCART socket on the rear of the television see page 44 for further details on the various connection possibilities gt tis recommended that you use the Ext 2 connector as it can process a Y C signal luminance and chrominance 4 Follow the instru
52. x will appear Navigate to the Settings tab on the display dialog box The correct setting of size resolution is 640 x 480 pixels If a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise gt gt Only black signal is output just click OK and exit the dialog box from a monitor in PC mode al 48 Viewing Pictures From External Sources O nce you have connected up your various audio and video systems you can view the different sources by selecting the appropriate input 1 Check that all the necessary connections have been made refer LCN ff to pages 46 and 47 for further details po 2 Switch the television on and if necessary press the VIDEO button 3 one or more times until the required input is displayed 2 Depending on the source selected the pictures may appear automatically gt watch television programmes again press the TV button C3 and select the number of the channel required Redirecting an Input to the Ext 2 or Ext 3 Output Your television enables you to choose which audio video signals are output to the Ext 2 or Ext 3 connector AV Setup 1 Press the button Result main menu is displayed ow Selectable Out 2 Move the joystick up or down until the Function is selected Result The options available in the Function group are di

Samsung CS-34Z6HF User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents