Samsung Z-100ME User Manual
Contents
1. 14 PROGRAM FUNCTION 15 Do not damage the power cord Damage to the power ZOOM FUNCTION 16 cord may cause a fire or shock hazard SEARCHING FUNCTIONS 17 e When unplugging the power cord please hold by the KARAOKE FUNCTION 19 a and e it a a D om TROUBLE SHOOTING 21 e When you finish operating the unit always turn off the ave ae a dee sated for a long tite with power WHEN VIDEO IS DISPLAYED THROUGH SET 22 turned on may damage thedise GENERAL INFORMATION ABOUT THE DISC 22 e When you insert the disc please do not insert over CARE OF PLAYER AND DISCS 22 another disc SPECIFICATIONS 23 e This product should not be used in business applications WHEN MOISTURE CONDENSATION GETS IN THE UNIT a A E A e When the unit is moved from a cold area to a warm area suddenly moisture may condense on the mechanical parts which restricts the laser signal from normal operation e f this occurs leave the unit with the power turned on for 1 2 hours without a disc SAFETY INSTRUCTIONS READ INSTRUCTIONS e All the safety and operating instructions should be read before the appliance is operated RETAIN INSTRU2. OWNER S INSTRUCTIONS Z 100M Z 10M Z 100Me Z 10Me VIDEO CD CD MP3 DISC PLAYER Before operating the unit please read this manual thoroughly and retain for future reference wise dt VIDEO CD DIGITAL VIDEO DIGITAL AUDIO This player does not apply to business use and CD ROM CD graphic discs cannot be played with this player Even though the MP3 disc that you purchased contains the MP3 mark on its cover the disc not written data by the format of MPEG1 LAYER3 file extension name MP3 can not be played back normally SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE TOP COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL DANGER This symbol is intended to alert you to the presence of dangerous voltage within the product CAUTION This symbol is intended to alert you to the presence of important instruction accompanying the product WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture Enter information here for future reference Date of Purchased Model No Serial No Selling Dealer Dealer Address Dealer Phone No CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than
3. Reading 6060 You can see the information of Disc on the TV TOTAL 150 PAGE 003 030 0 02 39 D1 DI Track No Song name gt 1 MP3 File display Select the Number button for Track No and Press the Select button NOTE Song names are marked by only English and digits But aon unsupported Data are marked by _ WAT ISM MP3 stands for MPEG 1 layer 3 It is an efficient way to store high quality music or other audio content on your computer MP3 files can be 1 4 to 1 20 the size of a commercial CD audio file yet retain a high sound quality MP3 files usually have the extension mp3 and can be downloaded from the Internet or can be legally made for personal use from your favorite CDs that you purchased 10 HOW TO PLAYBACK MP3 DISC on MENU MODE 1 After inserting MP3 E Disc in the Set Press 2222 _ sowew the DISC VIEW ST button ZOOM You can see the following information of Disc on the TV TOTAL 150 PAGE 001 003 000 0 00 00 aa DIRECTORY NAME ABC KBG CDEG123 Directory No Directory name Select the Number of Directory You can see the following Display MP3 TOTAL 150 PAGE 001 004 TR 000 0 00 00 DIRECTORY NAME 1 DIRECTORYNAME 2 ABC 3 KBG 4 CDEG123 Select the No of song and you can enjoy the Music TO RETURN TO THE PREVIOUS MENU Press the RETURN button eWhen a wrong menu is selected or other menu is about to be selec
4. power source indicated on the marking label If you are not sure of the type of supply to your home consult your appli ance dealer or local power company For video products intended to be operated from battery power or other sources refer to the operating instructions POWER LINES e An outside antenna system should not be located in the vicinity of overhead power lines or other electricdight or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal POLARIZATION e This video product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power out let only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electri cian to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug OUTDOOR ANTENNA GROUNDING e If an outside antenna is connected to the antenna terminal be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges e In the U S A section 810 of the National Electrical Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mast and
5. above press the 4 i m pil key to scroll the screen to the left right up or down While in the 4 x ZOOM Press the DISC VIEW ZOOM button for 1 sec or longer and display normal picture PARTEA ZOOM 16 SEARCHING FUNCTIONS Tum on the TV Load and play the disc HIGH SPEED SEARCH e This function is used to searching disc for desired location Press and hold down the Search button during the play e Hold down the Previous Next button on the front panel more than one second 2mm 0 Previous Next SET To play normally SKIP e When the pressed button is released it returns to the normal play Press the Previous Next iq gt buttons e Press the Previous Next I lt gt gt button on the front panel repeatedly within one second e When the Previous Next button is pressed it quickly advances to the Previous Next Track e When the m lt button is pressed it returns to the begin ning of the currently playing track If pressed again it returns to the previous track e Picture moves to the beginning of the next track whenever gt button is pressed e When the Previous or Next button is pressed while play ing a disc such as a movie disc it quickly advances 5 minutes in the forward reverse direction Previous Next NOTE In case of high speed search e When searching a CD disc the volume is lowered and it advances in high
6. power off AI SLEEP m TI 12 SELECT SOUND TO YOUR PREFERENCE PREPARATION 1 Press the POWER button The audio is set to the stereo mode automatically 2 Insert a disc and press the PLAY button Press the SOUND SELECTOR button Every time you press this button sound changes as show below REM OTE CONTROL Audio Output Screen on your TV monitor L ch R ch Ist press L CH L signal L signal 2nd press R CH R signal R signal 3rd press STEREO L signal R signal DISC VIEW FUNCTION Mode Desired music or video display can be used directly without by menu functions VER 2 0 This function is possible in Ver 1 1 and Ver 2 0 menu off mode TRACK VIEW e This function is performed in the STOP mode e This function is used for show the first views by nine in track ex VCD 1 1 Version Press the DISC VIEW button Nine tracks are presented with sound fE BE DISC VIEW OY D Press the DIGIT button to select Track View eThe selected track is displayed on the small screen with sound played EX When selecting No 4 Press the SELECT PLAY PAUSE 3 button e Displayed in full screen In case of cancelling the TRACK VIEW function Repress the DISC VIEW button eif playbacks as original case gt In case the number of tracks is more tha
7. speed e If the search does not operate properly due to the noise release the button momentarily and press it again e When the search for a VIDEO CD is released mosaic screen might appear or the screen might advance slower than the audio for a short period of time e f you choose SCAN in the middle of playing back your MP3 disc SOUND is not played 17 SEARCHING FUNCTIONS TIME SEARCH LAST MEMORY FUNCTION If you press the STOP or POWER button l Press the TIME button during VIDEO CD playback a playback position slightly ahead of the current time or track is stored in the unit s memory You can easily find the memorized position or track just press the TIME SEARCH button METHOD When you press the STOP or POWER button to finish the operation j Press TIME SEARCH button and this unit 2 Enter the time by pressing the will search for original position DIGIT button 1 2 3 4 NOTE 1 Last memory play is always operated as menu off mode even if last status is menu on 2 If you press stop and open this function will be cancelled 3 Press the SELECT pu button NOTE 1 If entering the time is greater than total time of the disc it will not be entered 2 If entering the time is greater than track time it will play next track 3 This function works only for playing mode 4 This function can operate only for Menu off mode of VIDEO CD 18 KARAOKE FUNCTION Tum on t
8. those specified herein may result in hazardous radiation CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCK DEFEATED AVOID EXPOSURE TO BEAM SPECIAL NOTICE Warning e This unit contains no user serviceable parts Never remove covers unless qualified to do so This unit contains dangerous voltages always remove main plug from the socket before any service operation and when not in use for a long period Important e This unit is designed for your enjoyment in your home We cannot be liable for the quality of the unit if you use it for commercial use So please do not use this unit for commercial use IMPORTANT NOTICE NOTE TO CATV SYSTEM INSTALLER e This reminder is provided to call the CATV system installer s attention to article 820 40 of the NEC provides guidelines for proper the cable ground shall be connect ed to the grounding system of the building as close to the point of cable entry as practical SAFETY INSTRUCTIONSH CONTENTS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 3 CONTROLS AND COMPONENTS 6 REMOTE CONTROL 8 TO INSERT BATTERIES eee 8 SYSTEM CONNECTIONS 9 MP3 DISC PLAYBACK ares 10 VIDEO CD PLAYBACK 11 DISC VIEW FUNCTION 13 REPEAT FUNCTION
9. ANING e Unplug this video product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning LIGHTNING e For added protection of this video product receiver during a lightning storm or when itis left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the video product due to lightning and power line surges OBJ ECT AND LIQUID ENTRY e Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the video product ACCESSORIES e Do not place this video product on an unstable cart stand tripod bracket or table The video product may fall caus ing serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recom mended by the manufacturer or sold with the video prod uct Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer CART e An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn POWER SOURCES This video product should be operated only from the type of
10. CTIONS e The safety and operating instructions should be retained for future reference HEED WARNINGS e All warnings on the appliance and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS e All operating and use instructions should be followed WATER AND MOISTURE e Do not use this video product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like OVERLOADING e Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock VENTILATION e Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video prod uct and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the video product on a bed sofa rug or other similar surface This video product should never be placed near or over a radiator or heat register This video product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been followed POWER CORD PROTECTION e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance CLE
11. Output level 2 Vrms 1KHz 0 dB Output2 level 0 5 Vms 1KHz 0 dB Audio characteristics frequency response 20Hz 20KHz Signal to Noise 85dB total harmonic distortion 0 1 at 1KHz 0dB 23 In case the need for Servicing arises Don t hesitate to call any nearby AS center with your name address and telephone number when anything wrong with your product occurs ELECTRONICS REV 01 AH68 00583B
12. RAM FUNCTION e This function can program up to 30 tracks during STOP mode ex To program No 4 track l Press the PROGRAM button PROGRAM PROGRAM Co P 01 000 Press the track number to be programmed Press the digit buttons Ex Select track 4 4 2222 PROGRAM P 01 004 E _ aa x z E E In a second e After step 2 you must press the PROGRAM button again then the selected number 04 is programmed eUp to 30 tracks can be programmed by repeating step 2 to 3 gt ooo PROGRAM PROGRAM les C4 P 02 000 4 Press the PLAY PAUSE button e Programming is completed and the first track of the program is played e When the PREVIOUS NEXT button is pressed the next or previous programmed track is played PROGRAM No Ps Ol oop Track No NOTE e f the PROGRAM button is pressed during programming it can not be programmed anymore press again to continue e To escape program function Press the OPEN CLOSE button or press the STOP button two times 15 ZOOM FUNCTION e This function works only in the VCD play mode Press the DISC VIEW ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM DISC VIEW ZOOM While in the 2 x ZOOM screen press the DISC VIEW ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM DISC VIEW ZOOM While in the stage of No 1 or No 2
13. STRUCTIONS REMOTE CONTROL OO RE 8 9 10 0 4 PALINTSC Al SLEEP DISC VIEW 12 me POWER STANDBY ON button 2 DIGIT buttons 3 PROGRAM button 4 SOUND SELECTOR button 5 Al SLEEP button 6 SELECT PLAY PAUSE button 7 STOP RETURN button 8 REPEAT PAL NTSC button 9 SLOW button 10 DISC VIEW ZOOM button 11 TIME SEARCH LAST MEMORY button 12 PREVIOUS NEXT SKIP button TO INSERT BATTERIES 1 Open the battery compartment cover Install two AAA batteries 3 Replace the cover observing the correct polarity as shown in compartment SYSTEM CONNECTIONS VCD AND CDP TV 1 Connect AUDIO OUT2 jack of the VCD and CDP to AUDIO IN jack of the TV 2 Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV SET REAR Q9 R ANT VIDEO CABLE AUDIO CABLE TO VIDEO IN TO AUDIO IN ANTENNA RF OUT H RF OUT RF CABLE VCD AND CDP TV AMPLIFIER 1 Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV 2 Connect AUDIO OUT jack of the VCD and CDP to the AUX or CD INPUT jacks of the AMPLIFIER SET REAR VIDEO CABLE AUDIO CABLE TO VIDEO IN z TO AUX OR CD IN AMPLIFIER MP3 DISC PLAYBACK HOW TO PLAYBACK MP3 DISC directly After inserting MP3 Disc in the Set Press Pil the select button or or Number button after 3
14. he TV e Load and play a disc KEY CONTROL FUNCTION Connect the MIC The key control will be displayed on the screen aWakoanew beatiholacke mode Press the Key Control button KEY 4 Press the Key Control button to adjust the key to suit to your voice the 15 step key control KEY 4 Load a disc and select a desired track e Eject the tray by pressing the Open Close button load a disc and close the tray ex In case of pressing Open Close KEY 1 On screen Display will disappear in 3 seconds Use the microphone ex In case of pressing once more e Two microphones can be used at the same time KEY 2 Note Depending on a type of VIDEO CD 2 0 disc it may be not operated Key Control function in still picture e This function is operated only on VCD Mode 19 KARAOKE FUNCTION Adjust the Digital Echo This will add an echo to your voice giving you the feeling of singing on stage Adjust it as desired Digital Echo To decrease To increase echo effect echo effect e e MIN MAX SET 20 To decrease or increase the volume of the Microphone e Turning to the left decreases Mic Vol Turning to the right increases Mic Vol MIN MAX SET If howling occurs Reduce the microphone volume Change the direction that the microphone faces Move the microphone away from the speaker TROUBLE SHOOTING SYMPTOM Tray is not ejected The unit doe
15. n ten Press the NEXT button watching the track bellow Press the PREVIOUS button watching the former track EX If the disc has 14 tracks Xt gt lt PREVIOUS lt The first nine tracks are shown Next track is shown 13 DISC VIEW FUNCTION REPEAT FUNCTION e Turn on the TV Load and play a disc INDEX VIEW This function acts as displaying the track in playing sequently by time and so it s convenient for searching desired video l Press the PLAY button to playback Press the DISC VIEW button e The display as dividing into nine equal parts in displayed together with relevant sound DISC VIEW Y ZOOM the desired part number lt s displayed from the selected part in full screen 3 Press the DIGIT button to play back 14 1 TO REPEAT ONE TRACK Press the REPEAT button REPEAT indicating the one track fec repeat lights and the one track is jeooo REPEAT played repeatedly PAL NTSC TO REPEAT ONE DISC Press the REPEAT button again e REPEAT indicating the one disc repeat lights and the one disc is 22 REPEAT played repeatedly PAL NTSC Note e The repeat function is cancelled when the Power Open Close buttons are pressed e Every press of this button changes lights 1st press MENE v 2 nd press Sn wW 3rdpress NORMAL play mode PROG
16. ning Clean the disc with water diluted with neutral detergent solution and wipe from inside to outside using dry cloth CARE OF PLAYER AND DISCS Bi SPECIFICATIONS Cleaning the Player Use soft cloth or the dusting attachment of your vacuum cleaner to dust the exposed surface of the player Use the vacuum cleaner attachment to remove dust from the ventilation holes on the top back sides and bottom of the cabinet Some of plastic surfaces are easily scratched and they can be marred by alcohol and various solvents Avoid excessive use of oil based furniture polishes since the materials used in the cabinet are non porous and the residue will accumulate more dust CARE OF DISC Handling Discs When loading or removing discs do not touch the playing surface DO NOT PLAY CRACKED OR WARPED DISCS Never play cracked scratched or warped disc _ This may damage the player cause it to malfunction GENERAL Power consumption 8 5W SPECIFICATIONS Weight 2 8 kg Dimensions 420 W x284 D x 111 H mm Operating temperature 5 C 35 C 41 F 95 F USABLE Media CD CD R 12cm single 74min cD 8cm single 20min 12cm Audio i wep single Video amn Format that can be played back MPEG1 LAYER3 MP3 12Cm single Sampling frequency 44 1KHz File extension name MP3 VIDEO OUTPUT Output level 1Vp p for 75 ohm load Ichannel AUDIO OUTPUT 2 Channels L R
17. s not play CHECK AND ACTION Check if the power is turned on Check if a disc is loaded Tray is ejected Check if a disc is contaminated or damaged Remove disc clean it and insert again Check if a disc is seated properly Video or audio is muted or tray is ejected after 2 5 seconds Check for condensation in unit Removed disc leave the unit with the power turned on for 1 2 hours The unit will operate only after the condensation is cleared Picture appears late when SELECT PLAY PAUSE button is pressed Repeated pressing of PLAY STOP OPEN caused disc drive motor to over heat and protection circuit activated until motor cools down Does not have video although disc is turned Check if TV power is turned on Check if connection is secure Check if the unit is bypassed Picture shakes vertically Picture may shakes momentarily during transition from dark to bright Picture quality of a particular disc is poor and picture shakes Check if disc is damaged or deformed Check if disc is contaminated SKIP or SEARCH takes too much time Some discs may require longer time to read encoded information Check disc TIME SEARCH searches different time Check if disc is contaminated or deformed When picture shakes disc may be contaminated or deformed causing malfunction Clean disc After pressing the SELECT PLAY PAUSE button there is a long delay before pic
18. supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See the figure below ATTACHMENTS Do not use attachments not recommended by the video product manufacturer as they may cause hazards ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 SAFETY CHECK e Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine that the video product is in proper operating condition DAMAGE REQUIRING SERVICE e Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been exposed to rain or water d If the video product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its nor mal operation e If the video product has been dropped or the cabinet has been damaged f When the video prod
19. ted hold down the RETURN button more than one second When the RETURN button is pressed shortly the disc may be stopped When you want to stop playing press the RETURN button short VIDEO CD PLAYBACK HOW TO PLAYBACK VIDEO CD version 2 0 Tur on the Power button Press the Open Close button The tray is ejected Open Close Insert a VIDEO CD disc and press the Open Close button Open Close 3 Press the SELECT PLAY PAUSE button eIn version 1 1 disc menu is not displayed and play function is operated e Only in version 2 0 disc menu is displayed e f you press directly the digit key at STOP MODE start to play the track of selected digit No without menu picture PBC OFF MENU OFF MODE Ex When playing a VIDEO CD version 2 0 disc Main menu 1 The collection of videos 2 Videorche 3 Music video 4 Movie 5 High definition static image Select a number from the menu and press it Ex In the case of selecting No 1 the collection of videos 1 Prologue 2 Beauty of Korea 3 Beautiful landscape of the South Pacific Ocean 4 A woman s day Select a number from the menu and press it Ex When selecting No 4 A woman s day TO RETURN TO THE PREVIOUS MENU Press the RETURN button When a wrong menu is selected or other menu is about to be selected hold down the RETURN button more than one second When the RETURN button is pressed shortly in VIDEO CD
20. ture appears on screen The disc rotates well but you do not have picture on the screen You can see the picture on screen but the quality is poor and the picture shakes If the PLAY STOP OPEN operations are repeated within short period of time the Disc Drive Motor overheats The disc will not rotate until the motor cools down This is a normal condition Wait a few minutes for the motor to cool down Check if the TV power is turn ON Check if the connection is good Check if the disc is in good condition No sound Check if disc is loaded upside down Insert disc with label side up Check if disc is severely deformed Clean the disc 21 WHEN VIDEO IS DISPLAYED THROUGH SET Source VIDEO CD DISC Display TV monitor SETMODE TVSYSTEM DISC DISPLAY REMARK PAL PAL OK PAL 50Hz K PAL 50H PAL NTSC 0 50Hz PAL NG No sync NTSC NTSC NG No sync PAL NG No color PAL NTSC NG No color NTSC PAL OK NTSC NTSC OK NTSC 60Hz Color or sync is in trouble according to TV set GENERAL INFORMATION ABOUT THE DISC GENERAL INFORMATION ABOUT THE DISC Compact Disc Digital Audio Max 20 min 8cm Single 3inch Compac Disc CD Digital Audio Max 74min 12cm Single 5 inch Video Compact Disc VCD 12cm 5 inch Digital Video and Audio Max 74min Single 22 CARE OF DISCS Use a soft dry cloth for clea
21. uct exhibits a distinct change in performance this indicates a need for service ELECTRIC GROUNDING CONDUCTORS SERVICE NEC SECTION 810 21 EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H SERVICING e Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards e Refer all servicing to qualified service personnel REPLACEMENT PARTS e When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or having the same charac teristics as the original part Unauthorized substitutions may result in fire electric shock or other haz ards CONTROLS AND COMPONENTS FRONT PANEL 1 Last Memory button 2 Key Control p button 3 Key Control button 4 Repeat button 5 Sound button 6 Power Standby On button 7 Select Play Pause button 8 Return Stop button 9 Previous Next buttons 10 Disc Tray 11 Open Close button 12 Mic jacks 13 Mic Volume knob 14 Digital Echo Volume knob CONTROLS AND COMPONENTS REAR PANEL 1 VIDEO OUTPUT 2 AUDIO OUTPUT AMP Connect to the VIDEO IN of your TV set Connect to the AUDIO IN of your STEREO AMPLIFIER 3 AUDIO OUTPUT TV Connect to the AUDIO IN of your TV set ACCESSORIES REMOTE CONTROL VIDEO CABLE AUDIO CABLE OWNER S IN
22. version 2 0 the disc may be stopped When you want to stop playing at the VIDEO CD version 2 0 menu on mode press the RETURN button short Press the NEXT button the next menu will be displayed Press the PREVIOUS button the previous menu will be displayed NOTE In the case of menu mode e PROGRAM TIME SEARCH REPEAT DISC VIEW functions do not work How to select a song or a video without using menu function Select a track number from the disc jacket and press it at the stop mode e When playing version 2 0 disc which has no MENU screen If no play or no picture Press SELECT button or NEXT button to see MENU screen or the next screen 11 SLOW MOTION Press the SLOW button on the remote control when the play function is on Voices do not come out when the SLOW button is pressed Slow playing is 1 2 of the normal playing speed at 1st press Slow playing is 1 4 of the normal playing speed at 2nd press Slow playing is 1 8 of the normal playing speed at 3rd press Slow playing is canceled at 4th press The sound is muted during the slow playing SLOW To return to normal operation Press the SELECT PLAY PAUSE button NTSC PAL SELECTION METHOD Press the PAL NTSC REPEAT button for 1 sec or longer on STOP Mode You can matching the picture display on your TV REPEAT PAL NTSC AI SLEEP FUNCTION Press Al SLEEP button After playing state is finished Automatically go to
Download Pdf Manuals
Related Search