Samsung AF9000 Floor-standing AC with Digital Inverter Technology, 28000 BTU/h User Manual
Contents
1. HH Immer 52 3 S east MEMORY BIM EN 03955A 02 EN indd 3 2014 10 28 12 00 46 USING PARTS Safety precautions Before using your new air conditioner please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance If you have any questions call your nearest contact center or find help and information online at www samsung com Important safety symbols and precautions A Hazards or unsafe practices that may result in severe personal WARNING injury or death A Hazards or unsafe practices that may result in minor personal CAUTION injury or property damage Q Follow directions S Do NOT attempt e5 Make sure the machine is grounded to prevent electric shock e Cut the power at the circuit breaker Do NOT disassemble FOR INSTALLATION A WARNING o Use the power line with the power specifications of the product or higher and use the power line for this appliance only In addition do not use an extension line gt Extending the power line may result in electric shock or fire gt Do not use an electric transformer It may result in electric shock or fire gt If the voltage frequency rated current condition is different it may cause fire The installation of this appliance must be performed by a qualified technician or service company gt Failing to do so may result in electric2. QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT INDONESIA UE www samsung com id support 08001128888 1 800 10 7267864 PLDT PHILIPPINES ie Be www samsung com ph support 02 4222111 Other landline THAILAND 9740833232 www samsung com th support 1800 29 3232 VIETNAM 1 800 588 889 www samsung com vn support Importir PT Samsung Electronics Indonesia JI Jababeka Raya Blok F 29 33 Kawasan Industri Cikarang Cikarang Bekasi 17530 S east MEMORY 1BIM 03955A 02 co EN indd 2 2014 10 81 Qe 1 49 13 AF28FVSDA Series AF28FVZDA Series imagine the possibilities Thank you for purchasing this Samsung product EN N V DB68 03955A 02 ex S east_MEMORY_IBIM_03955A 02_co_EN indd 3 2014 10 31 e 1 4914 Features of your new air conditioner I Samsung Air Solution Cool Clean and refreshing feeling at once Cool Air Your air conditioner uses air flow direction control which provide direct air flow in hot days and indirect air flow when you are cooled down Refreshing Air Auto mode will provide refreshing air by selecting the operation mode automatically from Cool Dry Purity depending on the indoor air environment I 4 seasons of effective cleaning Purity mode gt Purity mode can be selected solely to save energy gt When the air conditioner operates Zero filter and the Virus Doctor eliminates harmful contaminants to provide us with the cleanest air I Smart sensor Ca
3. CAUTION gt gt gt Check if the product is in good shape before the installation Do not install the product with the damage which occurred during shipment Read the installation manual thoroughly before installing the air conditioner Before installing the air conditioner make sure to discuss the location selection and the precautions on the installation manual with the user Perform the drainage piping work securely according to the installation manual If not water could drip from the unit and household goods could get wet and damaged Fasten a flare nut with a torque wrench as specified in this installation manual When fastened too tightly a flare nut may break after a long period of time and cause refrigerant leakage Wear thick gloves during the installation process If not personal injury may occur due to the air conditioner parts Be careful not to touch the outdoor unit inlet or aluminium pins You may get personal injury Do not install the outdoor unit in a place where animals could live Ifan animal comes into contact with the electric parts damage or fire may occur In addition ask the customer to maintain a clean installation place around it After completing the installation run the trial operation If no error occurs explain to the customer how to use and clean the air conditioner according to the user s manual In addition give the installation manual and the user s manual to the custome
4. drain hose N N J lt Connect the drain hose through the upper hole e Connection with wire concealed piping for drain hose Upper hole for Incorrect installation Upper hole for a drain hose Drain hose adrainhose Drainhose U TRAP Hole for piping connection Hole for piping connection AN lt Make sure the U TRAP does not occur Water may overflow and cause property damage CAUTION 44 S east MEMORY IBIM EN 03955A 02 EN indd 44 2014 10 28 9s 12 01 02 Electrical work The electrical work should be performed by a specialist qualified for the work caution Avoid using multi concent but use rate power supply for air conditioner Use separate power cable for outdoor unit I Wiring standard gt Always make sure that the power supply is compliant with current safety standards Always install the air conditioner in compliance with current local safety standards gt Make sure to install exclusive power supply purchase separately Ifyou use multiple connecting there is a risk of electric shock or fire gt Ifthe outdoor power supply has been selected install circuit breaker ELCB Purchased separately gt Make sure to connect earth wire HSII N3 Indoor unit Indoor power Indoor outdoor unit power cable WUR Outdoor unit Outdoor power Earth leakage circuit breaker Power 1 Ph 220 240 V 50 Hz 60 Hz Circuit breaker 20A Indoor ou
5. gt gt Put the filters vertically for 12 24 hours when drying and make sure it is fixed Drying time can be shorter depending on the in correct position Put condition the lower Full HD filter gt Do not dry the Zero filter in direct sunlight It may get back deformed A Be careful with the sharp rear surface of the Zero filter You may cut in your hands CAUTION Clean the Zero filter every 3 months Based on 8 hours of use per day Cleaning term may differ depending on Not the usage and environmental conditions 29 S east_MEMORY_IBIM_EN_03955A 02_EN indd 29 2014 10 28 2 12 00 55 Troubleshooting Refer to the following chart if the air conditioner operates abnormally This may save time and unnecessary expenses remains open PROBLEM SOLUTION mm e Check power status and then operate the air conditioner again X ng Switch on the circuit breaker and then operate the air conditioner conditioner doesnotwork agan atal Check if the air conditioner is turned off by Off timer or Smart sensor i Operate the air conditioner again by pressing the Power 1 button e Check if there is a power failure Front panel Check if there is any object blocking the front panel from closing Remove the object and then operate again Thetemperature adjustment is not working e Check if you have selected Turbo Purity mode In these modes temperature adjustment is not av
6. AF28FVZDAX N You cannot adjust the direction of air flow 20 S east_MEMORY_IBIM_EN_03955A 02_EN indd 20 2014 10 28 5 120051 good sleep operation For a comfortable sleep the air conditioner will operate in Fall asleep gt Sound sleep gt Wake up from good sleep mode When the air conditioner is on and in cool mode 1 Press the good sleep button on the remote controller to select the good sleep mode b good sleep indicator appears and Off timer indicator starts blinking on the remote controller display 2 Pressthe good sleep button to set the time b You can set the time in half hourly units from 30 minute 3 hours and hourly units from 3 hour 12 hours The operation hour can be set to minimum 30 minutes and maximum 12 hours Default operation hour is set to 8 hours Press the Set Cancel button to activate it Off timer indicator stops blinking and set time will be displayed Ee 3 icon appears in the display of the indoor unit and good sleep mode starts operating If you don t press the Set Cancel button to start the good sleep mode within 10 seconds the operation is canceled so you should check the Off indicator on the remote controller display and ey 3 icon on the indoor unit display HSITDN4 yy Vy v v Cancel Pressthe Set Cancel button once again T Hemp You can set the desired temperature by 1 C within the range of 18 C 30 C Fan F
7. gt The unit should be installed in accordance with the National Electrical regulations by a qualified installer and leased circuit must be used Lack of capacity on leased circuit or improper installation may cause electric shock or fire gt Use the specified wires to connect the indoor and outdoor units securely and attach the wires firmly to the terminal block connecting sections so that the pressure is not applied to the sections Inappropriate connection and fixing could cause fire gt Attach the electrical cover to the indoor and outdoor unit securely without any gaps If there are any gaps there is potential risk of fire or electric shock due to dust or water gt Make sure to use the part provided or specified parts for the installation work The use of defective parts could cause an injury or leakage of water due to a fire an electric shock the unit falling etc gt Make sure that the refrigerant gas does not leak after completing the installation Ifthe refrigerant gas comes into contact with the heating apparatus harmful gas will be generate Ifthe refrigerant gas of the indoor unit leaks and comes into contact with the fan heater space heater or stove harmful gas will be generated gt Ensure that a proper ground wire is in place Do not connect the ground wire to a gas pipe water pipe lightning rod or telephone grounding Defective grounding could cause electric shock gt Donotinstall the unit in a
8. h Indoor outdoor unit an communication cable ll Power cable Indoor outdoorunit The figure of an outdoor power cable unit may be different depending on models gt Before connecting compressed part of the terminal should face upward 3 3 Installed back to front Compressed part Ring terminal is is cut detached gt After tightening there should be no gap between a terminal and a screw If there is a gap fire may occur due to the heat of electronic connection part 1 Terminal is tightened A screw is not tightened firmly or there is a gap back to front between a screw and ring terminal lt When connecting the cables to the outdoor unit reversing the connection of power and communication cable or connecting the earth wire incorrectly electric leakage or product malfunction may occur Do not cut or modify the supplied cable and install it There is no front and back for the communication cable so it can be switched CAUTION Use solderless ring terminal to connect the power cable to the power terminal block If you connect stranded or solid wires without solderless ring terminal heat may generate from the connected part and cause fire S east_MEMORY_IBIM_EN_03955A 02_EN indd 46 2014 10 28 2 1201103 I How to connect your extended power cables gt Items to prepare Tools Crimping plier Connection sleeve mm Insulation tape Contraction tube mm
9. 1DN3 If you need to ensure the outdoor unit from falling use wires to fix it firmly lt Loosen the 4 screws from the top cover of the outdoor unit lt Putthe wire around the screws and fasten the screws lt Fixthe wire on the ground When the outdoor unit is not firmly fixed it may fall and cause personal injury or property damage caution When the outdoor unit is installed in water proofed rooftop fix the wire on the wall Airguide Not provided by 2 is manufacturer B unit leg i 5 Rubber leg 20 cm or more x l M ILLI Tit Spare space for piping Installation space for outdoor unit Refer to following examples for wind protection gt When installing in the street with lots of buildings install the product parallel to the street gt Inthe places with strong wind install the product with air outlet facing the wall Oy 22 60 cm or moe j c The air intake faces towards the wall The air outlet faces towards the all 502 Wall j S Air 4 57 outlet Strong wind I OGsirOGsstCS 0606489028880450 em P 30cmor 50cmor more 50cmor E O 9 PIOVI OVC Spare space 30 cm or more 60 cm or more for piping o o Oo40Oo 0 Otobo O 40Oto 0 O00 8A 30 cm or more 39 S east MEMORY IBIM EN 03955A 02 EN indd 39 2014 10 28 2 12 00 59 Accessories I Indoor unit accessories Remote
10. 33 Safety PIEGAULIONS 4 ooa GN ang EI a totem EN E E ia e ng su sa ean da dui e ertet 34 Required tools sasana naa A E a ie e ether mene HERR RR OR E IN EEOAR A DAAR ININA IN e AAA AA EAR RR AN Mn un 36 Choosingithe installation loCatiOTi su s2 ee eere KAKAK GB PER ERR D per IRE P PULURK ERR EY X Go E OR AN CREE sang 37 Indoor outdoor unit installation diagram sasasi eaaa tht nr rettet n AKAN a RN EEE KRANA NANA Aa 38 ACCeSSOTGS jik aaa ge a aia aj eja TAA aa a NGA ANG PN ENG Kg aa a daa a a a sa Aa BN E BEN DG a AG a aaa 40 Drillingaholeand fixing the iNdOOF Unit 2 cscscssessseedianid seboebaeGbbtsslsiioeilbibbikereessx444433385AAAASAA ANANE 41 CONNeGGUNngIpIp s P E GG HGB aa Wa BN KANAN 41 Connecting drain NOSE aaa A A a A SAGE TETEE EErEE EENE GAN aia AE AA AA ARD E ba aa RA a a A aaa 44 Electrical WOK MEPE EN 00606 005162 ART a EE ESE PN 55 3 3 S5 EEEE EEE ESEIA 45 EID EMT 49 Performing leakitest i66 s6 ensis itis rinri ss ETETE PERI E ERI P ER P VULUL ERR AG Vero aS RR 5 s Cha lu URS 50 installing the earth Wile aaa aka ERE ee Rex rn Kak KNA tia eleven Mee etr viaa e Ete ees m x E RAN MEM Uds 51 Gharging tefrigeratt sakan b gi tores qu pU 084 d assum dau a lo KE estes a espe ER ER gn ga Aga an raa Aan a aana 51 Gheckand test operation sawana nha erre pPERPRODN REOR MUR a g 3605 638 EAA ERAAN ga NEN EM NER 52 Pump down procedure When removing the produc
11. controller Fixing bracket for indoor unit Batteries Remote controller holder L gt cs n il NS M4x 16 screws User amp installation manual Cleaning cloth micro fiber Omm Q L I Outdoor unit accessories Indoor outdoor unit Indoor Outdoor unit power Liles tela communication cable cable e H H C O S 7 Cc M I Installation accessories Connection pipe amp Insulation Connection pipe amp Insulation Drain connection hose 06 35 mm 015 88 mm Sleeve Service tube Cable tie Putty Bushing Finishing tape Drain insulation tube pe Installation accessories may differ depending on the model 40 S east MEMORY 1BIM EN 03955A 02 EN indd 40 2014 10 28 2 12 01 00 l Drilling a hole and fixing the indoor unit gt Drilla hole with diameter of 60 65 mm towards the outside gt Ifthe indoor unit is installed on unstable ground it may be shaken by an external force or children and eventually get knocked down To prevent these accidents you must fix the top or back of the indoor unit tightly with fixing brackets HSII N3 E 150 mm or less Connecting pipes lt When installing make sure there is no leakage When recovering the refrigerant stop the compressor first before WARMNG OVing the connection pipe lf the refrigera
12. doing the work 3 Insert the flare nut into the pipe and then perform the flare process Flaring tool gt Flare length Outer Diameter D 96 35 99 52 015 88 Height H 1 3mm 1 8mm 2 2mm gt Incorrectly flared pipes w HOM AM Oblique Damaged Cracked Uneven surface thickness 42 S east_MEMORY_IBIM_EN_03955A 02_EN indd 42 2014 10 28 9s 12 01 01 gt Tightening of connection parts Alight the pipes to be connected and tighten the flare nuts with your hands first and then with a torque wrench tighten it in a direction shown in below illustration You can avoid of gas leakage by applying refrigerant oil on the flare connection part Flare connection part Monkey HSIT N3 Diameter D 96 35 mm 9 52mm 12 70 mm 15 88 mm 19 05 mm Torque kgf cm 140 170 250 280 380 420 440 480 990 1210 lt Apply the torque depending on the diameter and tighten it securely to make sure there is no leakage CAUTION Eliminate the uncondensed gas with vacuum pump and open the service valve to put the refrigerant Make sure to perform leak test Refer to Performing leak test on page 50 Insulate the drain hose after connecting it Insulate it correctly to avoid dew formation Pipe insulation 1 Insulate the refrigerant pipes heavily with the finishing tape Pipe insulation Finishing tape If the insulation is poor dew may form a
13. it with the insulation tape to finish Insulation tape Incase of extending the electric wire please DO NOT use a round shaped pressing socket caution Incomplete wire connections can cause electric shock or a fire AR 48 S east_MEMORY_IBIM_EN_03955A 02_EN indd 48 2014 10 28 25 12 01 03 Vacuum pump Vacuuming pipe 1 Completely connect the indoor outdoor unit pipes 2 Connect the manifold gauge to the service valve port of the low pressure side on the outdoor unit 3 Execute vacuum pump for over 30 minutes Ifthe pipe extension is larger time of the vacuum pump should also get longer 4 After degree of vacuum has been established open the service valve O as shown in the illustration Use soapsuds to check for refrigerant leakage on the connection part of the pipes HSII N3 Outdoor unit F amp T Condenser rer PIRE Indoor unit heat Airflow i exchanger E p i AE i 1 1 1 1 1 1 EE l i i i i 1 i i E E i Sensor 1 T L K i i EEV Compressor LPO Service Valve gt 2 Service Valve gt Vacuuming air conditioner Execute vacuum pump on the manifold gauge connected to low pressure side 2 to purge the air from the pipes and indoor unit 49 S east MEMORY IBIM EN 03955A 02 EN indd 49 2014 10 28 25 12 01 03 Performing leak test gt Use
14. leak tester or soapsuds on the pipe connection part after performing vacuum pump 1 1 14 Check for leakage Check for Z2 leakage Test part for indoor unit Test part for outdoor unit gt Before inspecting the leakage use a torque wrench to close the cap for the service valve Comply with a tightening torque for each size of the diameter and tighten the cap firmly to prevent any leakage b To check for any possible leakage insert inert gas into the pipes connected to indoor outdoor units and check the connection part of the indoor outdoor units with soap lather or liquid for leakage test Tightening torque for body cap Outer Tightening torque Referte the table Diameter Bodycap Charging port cap mm Nem Nem Spindle 6 35 20 25 Charging core 4 09 52 20 25 i 9127 25 30 10 12 R 22 Diameter of the screw 7 16 20UNF 915 88 30 35 R 410A Diameter of the screw 1 2 20UNF 19 05 35 40 Tightening torque for charging port cap Refer to the table 1N m 10 kgf cm 50 S east_MEMORY_IBIM_EN_03955A 02_EN indd 50 2014 10 28 e 120104 Installing the earth wire Earthing must be done by the installation specialist for your safety gt Connect grounding electrode and the air conditioner Charging refrigerant 1 Connect the manifold gauge in the low pressure
15. place where it is exposed to inflammable gas leakage When leaked gas accumulates around the product it may cause fire gt Perform the installation securely referring to the installation manual Incomplete installation could cause water leakage electric shock or fire gt Check first the following situations before starting the operation during the installation The pipe must be properly connected and make sure there is no leakage Service valves must be open If compressor is operated with the service valve closed excessive pressure may damage parts of the compressor If leakage occurs on any of the connections air inflow may also cause excessive pressure that could lead to explosion 34 S east_MEMORY_IBIM_EN_03955A 02_EN indd 34 2014 10 28 2 12 00 58 WARNING gt Do not assemble the power cord on your own use two cables together to extend the cable length or tangle the cable Bad connection isolation and over voltage may cause fire or electric shock Make sure to turn off the main power when setting up the indoor unit electrical circuit or power cords There is a risk of electric shock Install a ground leakage breaker depending on the installation place If not it may cause electric shock Never use the components and pipes for R 22 refrigerant on the models using R 410A refrigerant Ifthe oil used for R 410A gets mixed with the mineral oil for R 22 it will get hydrolyzed and cause product damage HSITDN4
16. shock fire explosion problems with the product or injury Install a switch and circuit breaker dedicated to the air conditioner gt Failing to do so may result in electric shock or fire Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed gt Failing to do so may result in electric shock or fire S east MEMORY 1BIM EN 03955A 02 EN indd 4 2014 10 28 2 iz0046 Do not install this appliance near a heater inflammable material Do not install this appliance in a humid oily or dusty location in a location exposed to direct sunlight and water rain drops Do not install this appliance in a location where gas may leak gt This may result in electric shock or fire Never install the outdoor unit in a location such as on a high external wall where it could fall gt If the outdoor unit falls it may result in injury death or property damage HSIT N1 This appliance must be properly grounded Do not ground the appliance to a gas pipe plastic water pipe or telephone line gt Failure to do so may result in electric shock fire an explosion or other problems at the product gt Make sure to use a socket outlet with ground FOR INSTALLATION A CAUTION o Install your appliance on a level and hard floor that can support its weight gt Failing to do so may result in abnormal vibrations noise or problems with the product Confirm that the indoor unit fixing device has been ins
17. side gas and press Set Cancel Mode Temp button simultaneously for 5 seconds to enter the refrigerant charging mode When the outdoor unit operates charge the refrigerant 2 Charge the refrigerant depending on the pipe length Ifthe installed pipe length exceeds standard length 5 m you must add 30g of refrigerant R 410A for every 1 m You do not need to charge the additional refrigerant when pipe length is less than 5 m Manifold gauge 4 Gas side HSI1DN3 Liquid side Refrigerant Electronic scale 3 After charging the refrigerant disconnect the manifold gauge from the service port and close the service cap 4 Deactivate the refrigerant charging mode by pressing Set Cancel Mode Temp button simultaneously for 5 seconds A lt Make sure to charge refrigerant with accurate amount by using the electronic scale CAUTION 51 S east_MEMORY_IBIM_EN_03955A 02_EN indd 51 2014 10 28 2S 12 01 04 Check and test operation 1 Supply power to the air conditioner 2 Turn on the air conditioner 3 While pressing and holding the Set Cancel button on the remote controller press the Power l button for 3 seconds to display the temperature of indoor heat exchanger Write down the displayed temperature Press the Turbo button on the remote controller to operate in turbo mode for 10 minutes 5 Check if the indoor unit is operating normally Standard condition to judge normal operation Indoor outdoor unit
18. to do so may result in electric shock fire problems with the product or injury FOR USING A CAUTION o Do not place objects or devices under the indoor unit gt Water dripping from the indoor unit may result in fire or property damage Check that the installation frame of the outdoor unit is not broken at least once a year gt Failing to do so may result in injury death or property damage S Do not stand on top of the appliance or place objects such as laundry lighted candles lighted cigarettes dishes chemicals metal objects etc on the appliance gt This may result in electric shock fire problems with the product or injury Do not operate the appliance with wet hands b This may result in electric shock Do not forcefully open the front panel while air conditioner is operating b This may cause damage to the product S east MEMORY 1BIM EN 03955A 02 EN indd 8 2014 10 28 12 00 46 Do not spray volatile material such as insecticide onto the surface of the appliance gt As well as being harmful to humans it may also result in electric shock fire or problems with the product Do not drink the water from the air conditioner gt The water may be harmful to humans Do not apply a strong impact to the remote controller and do not disassemble the remote controller Do not touch the pipes connected with the product gt This may result in burns or injury Do not use this air conditioner to preserve pre
19. 02_EN indd 54 2014 10 28 28 12 01 104 MEMO HSITDNA 55 S east_MEMORY_IBIM_EN_03955A 02_EN indd 55 2014 10 28 2 12 01 04
20. 955A 02 EN indd 23 2014 10 28 25 12 00152 Setting the On Off timer Combining On Timer and Off Timer If the air conditioner is Off If the air conditioner is On Preset time on On timer is shorter than Off timer Ex On timer 3 hours Off timer 5 hours Theair conditioner will turn on after 3 hours from the moment you have set the timer Your air conditioner will remain on for 2 hours and then turn off automatically Preset time on On timer is longer than Off timer Ex On timer 3 hours Off timer 1 hour Theair conditioner will be turned off after 1 hour from the moment you have set the timer After 2 hours your air conditioner will turn on lt Ontimer and Off timer setting time should be different from each other Note Ifyou press Set Cancel button or Power l button while the both On timer and Off timer are set simultaneously the functions of both On timer and Off timer are canceled at the same time 24 S east MEMORY 1BIM EN 03955A 02 EN indd 24 2014 10 28 2 12 00152 Smart sensor operation In Cool mode camera on the top of the indoor unit will detect the movement within the indoor and when there is no movement for certain time air conditioner will adjust the indoor temperature or turn off power automatically Press the button during Cool mode Applicable to AF FVSD only gt icon appears on the remote controller display and the E icon appears on the indoor uni
21. AAK ANAA Ba NB RA AB E Ne eS 4 Checking before Use eni mar ree eye vo KNA EE HERD NABA PP IP ENED BEK BN ERN RR ERU ERR 11 Ghackingthenameof the parts 2e eter enr dese SAADAH KN REA ARAS ERU U RON XE V ERE 131m Checking the remote controller asia eire c c c c b KK b gi PER ERR D p HR R VPDLDRK ERR EE VR YR P YN E EUREN 16 2 Basic Operation ss sa 290 552 0 0u 406 18 EB TUfDO OBSTAOTN 154111660656 EU 20 DXsi acc MEE 20 good sleep operatiofr sraon aa AA ANGGA aa Apa eres pide ee e tesis ee aa AA MEM M t n nh aS que 6a b u aaa 21 Setting the Or Offitilnel 2 seeded oit tte vene itunes esie enum ente remediis nu aa a a aa aa a NG a aa GA 23 SMart Sensor operatio eerca asaran etrrerPEEPERFEC Mad n NG CEPR STO ZW Orbe IEEE RUE gi g 0 0 anaa AAN PER MSS 25 Lighting FUGO 2 22 22162 16 nh n ner ere AG teen Bottin gae te 14 Pinot Aia ga Aa eds tate cet dS DUREE A BAN ahaaa 25 Quiet OPETAtION raaa acoder ag a a Ka AA aa baa Dur AG GETEN KN INGON GN e tea Cade aa ie EIE e haga DRE PRU RE 26 AUUOClEANIOPEFALION sa s262422140 515 5 etr sah con Ng ENTE D TG a AA D nag a an a aaa aa I AG ga Ga a A Bad Sad aaa Sa va DIN MR 26 Cleaning the air conditioner E A PANGGANG Na a NE a Nan aa aga NAN 27 TROUBIESHOOLING nie 3 5124222596 E EET TEES 30 OpenSource ANNOUNCEMENT sasra buried nahe d rere a sss Re Pineda eid ft hacac p Nagapasa tai
22. Spec MH 14 20x 6 5 H x OD Width 19 mm 70 x 8 0 L x OD Shape gt GD a 1 Asshowninthefigure peel off the shields from the rubber wire of the power Unit mm cable Peel off 20 mm of the wire shields of the tube installed already M gt Method 1 Insert both sides of core wire of the power cable into the connection sleeve Push the core wire in to the sleeve from both sides A After peeling off the tube wire you must insert a contraction tube CAUTION gt Method 2 Twist the wire cores together and push it in to the sleeve HSIT N3 180 NN Power cable provided by us gt Connection sleeve Connection sleeve 3 Using a compressor compress the two points and flip it over and compress another two points in the same location The compression dimension should be 8 0 After compressing it pull both sides of the wire to make sure it is firmly pressed S east_MEMORY_IBIM_EN_03955A 02_EN indd 47 gt Method 1 Compress it 4 times 5mm gt Method 2 Compress it 4 times 5mm 2014 10 28 2 12 01 03 47 Electrical work 4 Wrap it with the insulation tape twice and position your contraction tube in the middle of the insulation tape gt Method 1 gt Method 2 Insulation tape Insulation tape 40mm 35mm 5 Apply heat to the contraction tube to contract it Contraction tube 6 After tube contraction work is completed wrap
23. a gas leak such as propane gas LP gas etc ventilate immediately without touching the power line Do not touch the appliance or power line gt Do not use a ventilating fan gt A spark may result in an explosion or fire To reinstall the air conditioner please contact your nearest service center gt Failing to do so may result in problems with the product water leakage electric shock or fire gt A delivery service for the product is not provided If you reinstall the product in another location additional construction expenses and an installation fee will be charged b Especially when you wish to install the product in an unusual location such as in an industrial area or near the seaside where it is exposed to the salt in the air please contact your nearest service center S east MEMORY 1BIM EN 03955A 02 EN indd 6 2014 10 28 5 iz0046 Do not operate the appliance with wet hands gt This may result in electric shock Do not strike or pull the air conditioner with excessive force gt This may result in fire injury or problems with the product gt Importantly if the support bracket is excessively impacted it may become damaged Do not place an object near the outdoor unit that allows children to climb onto the machine gt This may result in children seriously injuring themselves Do not turn the air conditioner off with the circuit breaker while it is operating gt Turning the air conditioner off and then o
24. ailable Cool air does not come out of the air conditioner e Check if the set temperature is higher than the current temperature e Check if the Full HD filter is blocked by dirt If there is a lot of dust on the Full HD filter cooling performance may decrease Clean them frequently e Check if the outdoor unit is covered or installed near the obstacle Take the cover off and take the obstacle away e If you want to operate the air conditioner in the sunlight cover the outdoor unit using curtains or etc lt Ifthe doors or windows are open it may cause poor cooling performance Close the doors and windows lt If you have selected Purity mode without selecting other mode cool air does not come out of the air conditioner Press the Mode button to select other mode e Check if the pipe length is too long When the pipe length exceeds maximum allowable pipe length cooling performance may decrease PUBCON Check if you have selected good sleep mode In this mode you adjustment is ng SS cannot adjust the air flow direction since it is set to Auto not working ran speed lt Check if you have selected Dry Turbo good sleep mode In these adjustment is R modes fan speed is set to Auto and you cannot adjust the fan speed not working 30 S east_MEMORY_IBIM_EN_03955A 02_EN indd 30 2014 10 28 2 12 00 55 PROBLEM SOLUTION e Check if your batteries are depleted Make sure nothing
25. an speed will be adjusted automatically according to the good sleep mode vy Air flow direction will be adjusted automatically according to the good sleep i mode 21 S east_MEMORY_IBIM_EN_03955A 02_EN indd 21 2014 10 28 25 12 00 52 good sleep operation Temperature and fan speed changes in good sleep mode 1 Fall asleep mode Provides you with a comfortable environment for a good sleep by rapidly cooling your room and releasing a breeze that induces sleep 2 Sound sleep mode The sound sleep mode adjust temperature and air flow in waves to maintain healthy skin temperature while it aids deep sleep According to the change of good sleep operation hours the sound sleep hour can be longer or shorter 3 Wake up from good sleep mode Provides you with the air flow that adjusts your body temperature to wake you up ina fresh status In first 30 minutes of good sleep mode air conditioner will operate in Purity Cool mode nore lt The recommended set temperature is 25 C 27 C and 26 C is the most ideal temperature If the set temperature is too low you may feel cold or dry and catch a cold You may not have such a restful sleep if the good sleep is set too short or long because the default is set to 8 hour operation lt Ifthe good sleep mode is set less than 4 hours the operation will stop after the set hours If the good sleep mode is set over 5 hours it will run as Wake up stage from the last one hour befor
26. art sensor mode Sensor according to the surrounding WPS Wi Fi Air FanA V M Temp 1H Adjust how much air flows through the Increase Decrease the temperature Temp Fan air conditioner with the 4 different fan by1 C speeds E good E good sleep Quiet Set the good sleep mode on Reduced noise is generated during Auto Quiet Beep operation Auto Clean Clean Off Beep Off Off Timer Set the Off timer on On Timer Set the On timer on 2 4F button Select the function underneath a button lt 2 4F button When pressing the 2 4 button will appear on the remote controller display and you can Auto select the below function of a button e g When pressing gt 22 you can select the Lighting function If you press the 2 4F Power Purity and the Set Cancel button or don t press any buttons for 10 seconds the display will disappear and you can select the function of the button 16 S east_MEMORY_IBIM_EN_03955A 02_EN indd 16 2014 10 28 2 12 00 49 Remote controller display Operation mode indicator Transmit indicator Set temperature Low battery indicator Time indicator On Off Time indicator Fan speed indicator Hal Auto Kat Low Hal Medium Hall High HSITDN3 Air flow direction indicator K Heat mode will be displayed on the remote controller and reception sound will be ringing but the air conditioner will not operate the heat mode When you select heat mode with a remote contro
27. cision equipment food animals plants or cosmetics or for any other unusual purposes b This may result in property damage Avoid directly exposing humans animals or plants from the air flow from the air conditioner for long periods of time b This may result in harm to humans animals or plants This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency HSITDN4 FOR CLEANING A WARNING Do not clean the appliance by spraying water directly onto it Do not use benzene thinner alcohol or acetone to clean the appliance gt This may result in discoloration deformation damage electric shock or fire Before cleaning or performing maintenance cut off the power supply and wait until the fan stops gt Failing to do so may result in electric shock or fire S east_MEMORY_IBIM_EN_03955A 02_EN indd 9 2014 10 28 2 12 00 46 Safety precautions FOR CLEANING A CAUTION Take care when cleaning the surface of the heat exchanger of the outdoor unit since it has sharp edges gt To a
28. code for a period of three years after the last shipment of this product by sending an email to mailto oss request samsung com It is also possible to obtain the complete corresponding source code in a physical medium such as a CD ROM a minimal charge will be required HSITDN4 The following URL http opensource samsung com opensource Memory seq 0 leads to the download page of the source code made available and open source license information as related to this product This offer is valid to anyone in receipt of this information 33 S east_MEMORY_IBIM_EN_03955A 02_EN indd 33 2014 10 28 2 12 00 57 Installation parts Safety precautions Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order to be able to use it as reference after installation A WARNING Hazards or unsafe practices that may result in severe personal injury or death A CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage WARNING gt Installation must be carried out by a qualified installer Do not attempt to repair move modify or reinstall the unit on your own since such act may cause fire electric shock or water leakage gt Install the unit in a place where it is strong enough to hold the product weight When installed in place where it is not strong enough to withhold the product weight the unit could fall and cause injury
29. d on or off Full HD filter Air outlet Discharge cool air Virus doctor Support bracket Front remote controller holder Fix the remote controller holder on the front side of an indoor unit with screws e If the support cmon bracket is excessively impacted it may become damaged 13 S east_MEMORY_IBIM_EN_03955A 02_EN indd 13 2014 10 28 2 12 00 47 Checking the name of the parts I Display Mute Fan speed Virus doctor Cleaning Timer Temperature good sleep Air conditioner operation mode mode Current operation mode is displayed Outdoor unit Smart sensor operation operation I Buttons on control panel On Off button ae Temperature control button Increase or decrease the temperature by 1 C OOO Individual control button The number of air outlets is different depending on the models S east_MEMORY_IBIM_EN_03955A 02_EN indd 14 ke aa 2014 10 28 21 2 00 48 I Operation with control panel 1 Press the Power button to operate the air conditioner gt Theairoutlets will open in order with melody sound and the air N conditioner will operate with auto mode Stop Press the Power button one more time 2 Press the AW Vv buttons to adjust the desired temperature gt When pressing the button first the mode of air conditioner will change HSII N3 to cool mode e gt You can adjust the desired
30. e it stops automatically lt Ifyou press the Solo Family Smart Sensor Turbo Mode or Quiet button during the good sleep operation the operation is canceled and the selected operation starts Only the latest setting timer will be applied between the On Timer Off Timer and good sleep functions You can set the Purity function during the good sleep operation When operating the good sleep mode the air outlet will be automatically turned off and on depending on the difference between the current temperature and desired temperature 22 S east_MEMORY_IBIM_EN_03955A 02_EN indd 22 2014 10 28 S 12 0052 Setting the On Off timer You can set the air conditioner to turn on off automatically at desired time Setting On timer while the air conditioner is off Off timer while the air conditioner is on 1 Press the On timer or Off timer button gt On Off timer indicator will blink on the remote controller display 2 Press the On timer or Off timer button repeatedly to set the time gt You can set the time in half hourly units from 30 minute 3 hours and hourly units from 3 hour 24 hours The set hour is set to minimum 30 minutes and maximum 24 hours Press the Set Cancel button to activate it On Off timer indicator will stop blinking and the set time will be displayed icon appears in the display of the indoor unit and timer setting will be completed If you don t press the Set Cancel button within 10 seconds after s
31. ection with the outdoor unit Itis effective to install the unit at the place where air flow is not blocked and the cool air can be distributed throughout 2 the room gt Install the unit at a place where there is no obstacle against the wind around the air intake and air outlet v Avoid a place near the door which is frequently used by people gt Avoid a place exposed to direct sunlight If it is unavoidable install a sunshade Surface of the product may get discolored Install it on even ground lt Make sure there is no abnormal operation or noise generation If installed on uneven ground water may overflow I Outdoor unit Avoid a place exposed to direct sunlight If it is unavoidable install a sunshade A place free from the risk of combustible gas leakage A place which can bear the weight of the unit A place which can bear the fixing strength of the outdoor unit Avoid a place exposed to oil including machine oil Avoid a saline place Avoid a place exposed to sulfide gas hot spring zone When installing the unit at such special environmental conditions it may cause trouble to the product When it is unavoidable special maintenance is required gt Aplace where discharged air and noise of the outdoor unit does not disturb the neighborhood Take extra care not to cause any inconvenience to your neighbors when installing the unit on the borderline with your neighborhood gt A place wh
32. electing the On Off timer function the air conditioner will return to the previous status so you should check the On Off timer indicator on the remote controller display or RJ icon on the indoor unit display HSII N3 vvv v Cancel Press the Set Cancel button once again n Additional options available in On timer mode lt Setting On timer gt You can select from Auto gt Cool gt Dry gt Purity gt Heat When setting the on timer with Heat mode the air conditioner will operate with Auto mode You can adjust the temperature in Auto Dry mode Operation mode will change to Cool mode if you press the Temp or button in Auto mode and you cannot adjust the temperature during Purity mode 33 8 3 Cor C Timer C Fan You cannot adjust the fan speed lt Only the latest setting timer will be applied between the On Timer Off Timer and good sleep functions lt About 10 seconds after setting the On timer only the On timer indicator will appear on the remote controller display If you press the Power l button on the indoor unit after setting the On timer function with the remote controller Timer indicator on the indoor unit display will disappear and the function will be canceled However Timer indicator on Setting Off timer the remote controller will remain on but the function will not work 23 S east MEMORY IBIM EN 03
33. ere strong wind does not head against the air outlet of the outdoor unit Ifa strong wind heads directly against the air outlet at the time of cool operation a safety device can be operated Donotinstall the outdoor unit on a unstable places such as rooftop If installation is unavoidable make sure that you fixed the unit firmly Avoid places where strong wind or storm can possibly knock down the product such as seashore or place with frequent storm vvvvvvy 37 S east_MEMORY_IBIM_EN_03955A 02_EN indd 37 2014 10 28 2 12 0058 Indoor outdoor unit installation diagram Installation space for floor type indoor unit gt To minimize the waste of space due to installation install the indoor unit as shown in below figure Topview After completing the installation remove the protection vinyl Be careful of static electricity After completing the installation remove the protective filament film on the product aoe Make sure that there are no obstacles such as curtains etc blocking air 50cm P inlets of the indoor unit or more fe CAUTION i X Mt Clear space on the right side of the indoor unit for possible filter maintenance in the future Protection vinyl Piping length for indoor outdoor unit installation gt Refer to illustration on the left for maximum allowable piping length and elevation gt Since product performance and lifespan may decrease as piping leng
34. f air conditioner operation lt The lighting figure will differ depending on the models NOTE lt The use of lighting function will be different depending on the model lt When the air conditioner is turned off the reception sound will be ringing from the air conditioner but the lighting function will not operate 25 S east_MEMORY_IBIM_EN_03955A 02_EN indd 25 2014 10 28 2 12 00 53 Quiet operation This function can reduce the noise generated during air conditioner operation Press the button to select Quiet function gt icon will appear on the remote controller display Cancel Press the Quiet Mode or Fan A V button once again Temp You can adjust the desired temperature by 1 C within the range of 18 C 30 C Fan Since the fan speed is fixed as of af Auto pressing the Fan A V button will M cancel the Quiet operation You can set the air flow direction lt You can select the Quiet operation while the air conditioner is in cool mode Nor Ifyou select the Quiet operation during the Smart sensor Turbo good sleep operation corresponding operation will be canceled When selecting the individual operation of an indoor unit in quiet operation the indoor unit will change to cool mode Auto clean operation Auto clean function will prevent mold from growing by eliminating the moisture inside of the indoor unit Press the button When the air conditioner is turned o
35. fore pulling out the lower Full HD filter take out water the Zero filter first gt When the dust is serious clean the filter with warm water which contains a neutral detergent However when rubbing out the filter with a brush the Full HD filter may be damaged Push the Full HD filter to the end in the arrow Dry the filter completely in the shade direction so that it can be completely fixed gt When drying the Full HD filter make sure the gt After pushing the lower filter is not exposed to direct sunlight Full HD filter push the Zero filter B lt Clean the Full HD filter every 2 weeks Cleaning term may differ depending on the usage and environmental NOTE conditions 28 S east_MEMORY_IBIM_EN_03955A 02_EN indd 28 2014 10 28 2 12 00154 Cleaning the Zero filter Zero filter traps small dust particles within the air It is washable and it can be used semi permanently Remove the lower Full HD Soak the filter in the water and shake it up and down for filter Grasp the handle on few times the Zero filter and remove it n gt Do not disassemble the Zero filter when cleaning it by pulling it in the direction gt Ifthe accumulated dust is heavy soak the filter in water of the arrow shown in the mixed with detergent and shake it in water for 30 figure minutes until it is cleaned HSITDNA Push the Zero filter in the Dry the filter in a ventilated area direction of the arrow
36. inging but the heat mode will not operate A Press the ran button to set the desired fan speed pet Auto sik a Auto Operation mode will change to Cool mode when the Fan speed is adjusted Cool eo a Auto Kan Low Sanh Medium Hy gl High Dry e al Auto Purity E gp Low gl Medium all High Press the rem button to adjust the desired temperature Auto Operation mode will change to Cool mode when desired temperature is adjusted Cool You can adjust the desired temperature by 1 C within the range of 18 C 30 C Dry You can adjust the desired temperature by 1 C within the range of 18 C 30 C Purity A Temperature adjustment is not possible lt Ifyou select Purity function additionally while operating in other mode you can adjust the temperature NOTE except in Auto mode lt Ifyou press the Temp or button on the indoor unit control panel while operating in Purity mode operation mode will change to Cool mode 19 S east_MEMORY_IBIM_EN_03955A 02_EN indd 19 2014 10 28 25 12 00 50 Turbo operation Turbo function will be helpful to cool your room quickly and effectively Press the button on the remote controller in the Cool mode gt Turbo indicator 5 appears on the remote controller display and the air conditioner will operate in Turbo function for 30 minutes gt Cancel Press the Turbo Mode Quiet Smart Sensor or good s
37. is blocking your remote controller sensor Remote lt Check whether there are strong lighting apparatus near the air controllerisnot conditioner Strong light which comes from fluorescent bulbs or m working neon signs may interrupt the electric waves a ua I lt Stand towards the center of the product point the remote controller towards the remote control receiver and press the button Timer function Check if you have pressed the Set Cancel button on the remote doesnotwork controller after setting the time Theair e Check the air conditioner is in auto cleaning mode When turning the conditioner is air conditioner off after using the auto cleaning function it will take not turned off 3 minutes to turn the air conditioner off lt Odor may permeate depending on the surrounding environment or Odors permeate operating condition Ventilate the indoor air in the room e Check if the appliance is running in a smoky area Ventilate the room during or operate the air conditioner in Purity mode for 1 2 hours We do operation not use smelly components in the air conditioner lt Clean the Zero filter and Full HD filter if they are dirty lt When error indications appear on the indoor unit display press the Set Cancel button and Fan V button for 4 seconds If error indications appear again contact a service center When E 19 8 i Eg B i and E8 Ue appear on the indoor unit display check the power cable of outdoor unit i
38. leep button lt Turbo function is only available in the Cool mode Note lt Ifyou select the Turbo function during the Quiet Smart sensor good sleep operation the Quiet Smart sensor good sleep operation will be canceled You can adjust the air flow direction lt You cannot adjust the desired temperature and fan speed lt When selecting the individual operation of an indoor unit in turbo operation the indoor unit will change to cool mode Air flow direction You can adjust the air flow direction according to the surrounding environment Press the button to select desired air flow direction Indirect Air will not flow to the person directly but provide coolness rather indirectly Direct Cool air will flow directly to the person E3 Center Cool air will come out intensively from the center Air flow blades will move left right to provide the cool air to wide range of zs Wide area Long It is efficient to cool the area further away Operation mode Supported air flow Auto Indirect Direct Cool Dry Purity Center Wide Long lt Airflow cannot be selected during good sleep mode When the Long air flow direction is selected you may change the fan speed from the remote controller and the beep may sound but the air conditioner is not actually operating in selected setting MODE Model Name Air flow direction Tin AF28FVSDAX N Indirect Direct
39. ller and you turn the air conditioner off and on the air conditioner will operate with auto mode and heat mode will be displayed on the remote controller Change the operation mode of a remote controller Left fan and right fan will be displayed as not supported function and reception sound will be ringing However the left and right fans will not operate Battery changing time Inserting the batteries When the battery is exhausted Z1 will be displayed in 1 Open the battery cover the remote controller display When the icon appears gt Push the lt part in the change the batteries The remote controller requires two direction of the arrow and lift up 1 5V AAA type batteries the cover 2 Insert the batteries gt Check and match the signs and insert them in correct position 3 Close the battery cover gt Match the cover and bottom part of the remote controller and press it until you hear click sound Storing the remote controller When you do not use the remote controller for along time remove the batteries from the remote controller and store it A e Make sure that water is not allowed to enter the remote controller CAUTION lt There is a possibility that the air conditioner will not operate by remote controller near strong light such as a fluorescent lamp or neon sign In this case use the remote controller in front of the remote controller receiver of the indoor unit NOTE Ifothe
40. mera on the top of the indoor unit will detect the movement within the indoor and when there is no movement for a certain time air conditioner will adjust the indoor temperature or turn off power automatically to save the energy Applicable to AF FVSD gt only X Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal S east_MEMORY_IBIM_EN_03955A 02_EN indd 2 2014 10 28 2 12 00 46 Contents USING PARTS Safety precautions ssri aa AA a wens a Na an nak KE KAKA AA a a I IE ER ga
41. n icon appears in the display of the indoor unit and the Auto cleaning function will run for 3 minutes after air conditioner stops operating When the air conditioner is turned off gt icon appears in the display of the indoor unit and the Auto cleaning function will run for 3 minutes Cancel Press the Auto Clean button once again The Auto clean indicator appears only on the indoor unit display Note Ifyou select another mode during auto clean operation the selected mode will start its operation When the selecte mode finishes the auto clean function will be initialized and run again for 3 minutes 26 S east_MEMORY_IBIM_EN_03955A 02_EN indd 26 2014 10 28 2 12 00 54 Cleaning the air conditioner A Make sure to turn off the circuit breaker when cleaning the air conditioner CAUTION I Cleaning the indoor unit gt Wipe the surface of the unit with a slightly wet or dry cloth when needed gt Brush away the dust on the narrow gap of air conditioner HSIT N3 Since the panel of the product can be scratched easily use the exclusive cleaning Nor Cloth micro fiber for cleaning Wet the exclusive cleaning cloth micro fiber with little bit of water and make sure to remove any foreign object on the cloth since the product can be scratched easily When cleaning the indoor unit use soft and slightly wet cloth micro fiber because the indoor unit panel is easily scratched Dust off
42. n again with the circuit breaker may cause a spark and result in electric shock or fire After unpacking the air conditioner keep all packaging materials well out of the reach of children as packaging materials can be dangerous to children gt Ifa child places a bag over its head it may result in suffocation Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating or the front panel is closing gt Take special care that children do not injure themselves by inserting their fingers into the product HSIT N1 S east_MEMORY_IBIM_EN_03955A 02_EN indd 7 2014 10 28 S 1200146 Safety precautions FOR USING A WARNING OQ Do not insert your fingers or foreign substances into the air inlet outlet of the air conditioner gt Take special care that children do not injure themselves by inserting their fingers into the product Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people gt Since this may be dangerous due to a lack of oxygen open a window at least once an hour If any foreign substance such as water has entered the appliance cut off the power supply and contact the nearest service center gt Failing to do so may result in electric shock or fire Q Do not attempt to repair disassemble or modify the appliance yourself b Do not use any fuse such as copper steel wire etc other than the standard fuse gt Failing
43. nd leak through the indoor ishi i i i Indoor outdoor unit 2 Use finishing tape wind upthe refrigerant pipe ton SEE D indoor outdoor unit 3 When you bend the pipe and secure a minimum bending power cable radius of 100mm to prevent any distortion of the pipe Wind a finish tape when connecting refrigerant pipe and communication cable is completed Indoor unit Outdoor unit Low pressure pipe High pressure pipe Valve core L wrench l Q Service port cap o Flare nut Low pressure side HH High pressure side Stop valve Service port S east_MEMORY_IBIM_EN_03955A 02_EN indd 43 43 2014 10 28 2S 12 01 02 Connecting drain hose 1 Slightly hit the hole for drain hose with your hands or hammer 2 Insulate the drain hose with drain insulation tube and fix it with tape 3 Direct the drain hose downward to establish natural draining Make sure to check for proper drainage after connection Fix the drain hose tightly to prevent any water leakage caution Do not use the extended drain hose Since water may leak from the connection part make sure that you do not extend the drain hose However if extension is unavoidable due to its short length use silicone sealant to securely seal the connection to prevent leakage Do not use the insulation tape Drain hose Duct drainage Polypropylene PP Insulation foamed polyethylene Connection
44. ng devices during cooling operation Cooling effect will decrease I Storing indoor unit gt Dry the air conditioner thoroughly by operating Purity mode for 3 to 4 hours gt Stop the operation and disconnect the power or turn off the auxiliary power switch HSITDN3 lt Do not move the product on your own Pipe may get loose or pipe can get ww damaged I Using outdoor unit Take away covers or barriers gt It may cause product failure and poor performance in cooling by blocking air flow I Installing outdoor unit gt Install the outdoor unit in well ventilated area with no sunlight If sunlight is unavoidable install a sunshade 11 S east MEMORY IBIM EN 03955A 02 EN indd 11 2014 10 28 9s 12 0047 Checking before use Auxiliary power switch Turn on the auxiliary power switch which is installed separately Only applicable for outdoor unit with separate power supply Auxiliary power switch NFB ELB etc Auxiliary power switch is not included in the package Purchase and install it separately Auxiliary power switch is a device for preventing over current or short circuit Install it separately near the indoor unit and turn it off when cleaning or when you don t use it for long time If NFB or ELB has already installed in the switch box of the building you don t need to install auxiliary power switch Operation ranges When the air condi
45. nt pipe is not properly connected and the compressor works with the service valve open the pipe inhales the air and it makes the pressure inside of the refrigerant cycle abnormally high It may cause explosion and injury I Installation procedure 1 Slightly hit the hole for piping connection with your hands or hammer Upper hole for drain hose Hole for piping connection Drain hose 410mm Piping 41 S east MEMORY IBIM EN 03955A 02 EN indd 41 2014 10 28 e 20101 Connecting pipes 2 Bend the connection pipe to an appropriate length using a bender depending upon the installation place 3 Perform pipe bending process Perform bending of the pipe using the pipe bender which has a specified bending radius Be sure to take full care to perform bending of the pipe successfully at one time Bending and unbending the pipe more than twice makes the bending work increasingly difficult 4 Connect the high pressure pipe 26 35 mm and low pressure pipe 215 88 mm to the high low pressure pipe of the outdoor unit and tightening by applying appropriate torque gt Flare process 1 Cut the pipe using the pipe cutter OR RE Oblique Rough Burr 2 Remove burr on the edge of the pipe If burr is not removed after cutting the pipe there is a risk of refrigerant gas leakage If foreign substance such as burr goes into the pipe there is a risk of product breakdown Therefore face the pipe downward when
46. onditioner is operating When the Purity mode is selected during air conditioner operation changes in power consumption or operation noise will be very subtle vvvvvy gt When the air conditioner and Purity mode is on at the same time you can press the Power 1 button to stop the operation gt When Purity mode is on you can press the button to stop the Purity operation 18 S east_MEMORY_IBIM_EN_03955A 02_EN indd 18 2014 10 28 2 1200150 Press the button to turn on the air conditioner Press the button to set Solo Family mode Solo Select this function if you are alone in the room or want to save your electricity bill Family Select this function if there are lots of people in the room or require powerful cooling m z Family mode Solo mode Remarks a n O The middle air outlet will be closed when the air conditioner reaches the E O O desired temperature in solo mode When selecting the solo mode in purity o mode the upper and middle air outlets are closed Q Open Q Close Family mode is set as default setting in all operation mode except Auto mode During Auto mode Solo Family mode cannot be changed with remote controller Press the button to set the operation mode Auto Cool Dry Heat SET wore SET LIC SET Lr Paul 4 I Sal 4 E t d Fat Lot al Heat mode will be displayed on the remote controller and reception sound will be r
47. over 21 C operate in Cool mode for over 10 minute 6 While pressing and holding the Set Cancel button on the remote controller press the Power button for 3 seconds to display the temperature of indoor heat exchanger Ifthe displayed temperature differs over 10 C from the temperature written down previously it is operating normally 7 When checking above step 1 6 is done tell the user how to use the air conditioner Pump down procedure When removing the product 1 Press the Power l button on the indoor unit control panel for 5 seconds to enter the Pump down mode and operate the compressor for over 5 minutes Or Press the Set Cancel Mode and Temp button on the remote controller simultaneously to enter the Pump down mode and operate the compressor for over 5 minutes Remove the High Low pressure side valve cap Use the L wrench to completely close the valve on the high pressure side After 2 minutes completely close the valve on the low pressure side Press the Power button on the indoor unit control panel for 5 seconds to deactivate the Pump down mode Or Press the Set Cancel Mode and Temp button on the remote controller simultaneously to deactivate the Pump down mode 6 Disconnect the pipe nak dah k 52 S east_MEMORY_IBIM_EN_03955A 02_EN indd 52 2014 10 28 28 12 01 104 MEMO HSITDNA 53 S east_MEMORY_IBIM_EN_03955A 02_EN indd 53 2014 10 28 2 12 01 04 MEMO 54 S east_MEMORY_IBIM_EN_03955A
48. r Do not open the front panel of the indoor unit during operation It may cause damage to the product Check the product before installing it Checkthe unit for damage that may have taken place during transportation and do not install or use damaged equipment All ofthe manufacturing and packaging material used for your new appliance are compatible with the environment and can be recycled This product is an air conditioning system and contains a refrigerant that must be recovered and disposed of in an appropriate way by qualified personnel Atthe end ofthe life cycle take it to a proper recycling or disposal center or return it to the dealer so that it can be disposed correctly When customer claim is caused by not following above safety precaution installer is responsible for the claim Installer is responsible for the service charges 35 S east_MEMORY_IBIM_EN_03955A 02_EN indd 35 2014 10 28 2 12 00 58 Required tools I General tools Vacuum pump Q2 Torque wrench 4 Reamer S Pipe bender Screw driver Spanner L wrench 1 Measuring tape I Tools for test operations D Thermometer 2 Resistance meter 36 S east MEMORY 1BIM EN 03955A 02 EN indd 36 3 Pipe cutter 6 Spirit level 9 Drill 3 Electroscope 2014 10 28 21 2 00 58 Choosing the installation location I Indoor unit gt Install the unit at a place close to the wall facing the outside as it is necessary to perform piing conn
49. r electrical products are operated by the remote controller call your nearest service center Correct disposal of batteries in this product Applicable in countries with separate collection systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system S east_MEMORY_IBIM_EN_03955A 02_EN indd 17 2014 10 28 2 12 0050 Basic operation Basic operation isan operation mode that can be selected by pressing the Mode button Auto In Auto mode the air conditioner will automatically set the operation mode in Cool Dry Fan mode to provide refreshing air throughout your indoor area gt In Auto mode the air conditioner will automatically set the operation mode depending on the indoor surrounding Display on the indoor unit will display Auto Cool Auto Dry and Auto Purity gt In Auto mode Smart sensor will detect the surrounding area with the camera on the indoor unit The
50. refore air flow direction and the fan speed may differ depending on the surrounding condition gt When selecting the individual operation of an indoor unit in auto mode the indoor unit will change to cool mode I Cool Cool mode is frequently used and you can freely control the temperature fan speed and air flow direction in cool mode Dry The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air Outdoor unit will repeatedly and automatically turn on off for maximum dehumidification according to the temperature difference of the current and desired temperature When the outdoor unit operates cool air may come out from the indoor unit gt As you lower the set temperature of a remote controller the amount of dehumidification will increase gt As you lower the set temperature of a remote controller indoor temperature may decrease Purity e This operation eliminates harmful contaminants within the air to provide a healthy and clean environment You can select Purity mode by pressing the button while the air conditioner is on or off In purity mode ZA will appear on the display of an indoor unit and will appear in 1 minute You can press the button during Cool Dry mode and adjust the desired temperature If you select Purity function in Auto mode operation mode will change to Cooling Purity mode Front panel will be closed slightly when Purity mode is selected solely while the air c
51. s connected If the connection is ok turn the indoor unit off and on again lt When Et 3 E 5 E t 84 E t 8 E 1 283 E 1 88 El 28 EIC tH ETI 55 EI BI ETO BS 61 87 ET SB EB 03 Eg 2 1 Ee 3 EP H5 Ee 51 EP B1 E3 0B ag m m m m m m m m m m EL EHI EH EH EY 6e EH 53 EH BH EH 55 EH 55 EH E En ES EM 58 EH D EH lt EH ip Ed H EH B3 Ed B5 65 00 E5 5H are blinking the air conditioner has a problem In this case contact a service center Error is indicated 31 S east MEMORY IBIM EN 08955A 02 EN indd 31 2014 10 28 S 1200157 Troubleshooting PROBLEM SOLUTION lt Depending on the status ofthe air conditioner usage noise can be Noise is heard when refrigerant flow movement changes It is normal generated Crackling sound may occur during the operation of the air conditioner push the Zero filter to the end Water is Water may be generated because of the temperature difference It is dropping from normal the outdoor When the humidity difference of air outlet is big water drop may unit piping be formed and dripping Therefore do not worry about this with connection product malfunction 32 S east MEMORY 1BIM EN 03955A 02 EN indd 32 2014 10 28 2 12 00 57 Open Source Announcement The software included in this product contains open source software You may obtain the complete corresponding source
52. t display gt When the movement is not detected for 1 hour temperature will be adjusted automatically gt When the movement is not detected for 2 hours air conditioner will turn off automatically HSIT N3 Cancel Press the Smart Sensor button once again lt Smart sensor will detect about 25 on the left and right side of the product Note In dark places camera cannot detect the movement and Smart sensor function may not work properly SET i UB en lt Smart sensor mode may get disturbed by change of light or movement change caused by devices such as TV fan etc Remote controller display Indoor unit display Lighting function You can create fresh mood of indoor room with soft light by turning the light on After pressing the button and checking the indicator on the remote controller display press the button to adjust the lighting level of an indoor unit ca gt Each time you press the Lighting button during air conditioner operation the lighting level will be adjusted The lighting function will work only with opened air outlet gt When changing the lighting level press the 2 4F button first and then press the Lighting button repeatedly to adjust the desired level Press times Brightness 1 Level 1 Low lt Remote controller display gt otf 3 Level 3 High 4 Level 2 Medium lt The lighting figure may change depending on the status o
53. talled by confirming this with an installation engineer gt If the indoor unit fixing device is not installed the indoor unit may vibrate and fall and this may result in injury Install the draining hose properly so that water is drained correctly gt Failing to do so may result in water overflowing and property damage S east_MEMORY_IBIM_EN_03955A 02_EN indd 5 2014 10 28 2 iz0046 Safety precautions FOR POWER SUPPLY A WARNING Q When the circuit breaker is damaged contact your nearest service center S Do not pull or excessively bend the power line Do not twist or tie the power line Do not hook the power line over a metal object place a heavy object on the power line insert the power line between objects or push the power line into the space behind the appliance gt This may result in electric shock or fire FOR POWER SUPPLY A CAUTION When not using the air conditioner for a long period of time or during a thunder lightning storm cut the power at the circuit breaker gt Failing to do so may result in electric shock or fire FOR USING A WARNING If the appliance is flooded please contact your nearest service center gt Failing to do so may result in electric shock or fire If the appliance generates a strange noise a burning smell or smoke cut off the power supply immediately and contact the nearest service center gt Failing to do so may result in electric shock or fire In the event of
54. tdoor unit power cable 1 0 mm or more Outdoor unit power cable 2 5 mm or more Indoor outdoor unit communication cable 0 75 mm or more I Connecting procedure 1 After loosening the 4 screws of support inlet disassemble the support inlet 2 Connectthe housings of communication cable 2 for an indoor unit and outdoor unit 3 Fixthe power connection cable and communication cable with a cable clamp 4 After assembling the SUPPORT INLET and fix it with the screws Screw Power terminal SUPPORT INLET Earth plate Cable clamp COVER PCB Communication cable Rn Power connection cable Housing 45 S east MEMORY IBIM EN 03955A 02 EN indd 45 2014 10 28 25 12 01 02 Electrical work Safety information on outdoor unit power supply gt Power supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible cord Code designation IEC 60245 IEC 66 CENELEC HO7RN F Rated voltage 450 750V HO7RN F 60245 IEC 66 Use cable over 2 5 mm Distance 15 m or less I Type of outdoor unit power supply gt Comply with tightening torque to make sure that the screws do not get loose Electrical parts Power part Torque Screw kgf cm Nem Outdoor unit M4 12 18 12 138 Communication cable Cabinet panel Cable clamp E B
55. temperature by 1 C within the range of 18 C 30 C by pressing the A V buttons 3 Adjustfan height with the three individual air outlet control buttons gt You can adjust the fan height by controlling the air outlet individually gt Individual control will be canceled when turning the air conditioner off and on The fan speed of each air outlet is different ar 15 S east_MEMORY_IBIM_EN_03955A 02_EN indd 15 2014 10 28 25 12 00148 Checking the remote controller Function may be different depending on the model gt Point the remote controller towards the remote control receiver of the unit gt When the button is pressed you will hear ringing or beep sound and Transmit indicator 4 will appear on the remote controller display I Remote controller buttons Remote controller display Mode Select one ofthe 5 operation modes Turbo Operate in maximum fan speed to cool quickly Power b Turn on off the air conditioner Solo Family Purity Select Solo Family mode Select Zero filter and Virus doctor Activate auto clean function to dry inside Lighting A A To silence the beep sound when pressing of the indoor unit to get rid of odor the button On off Set Timer Timer Cancel and Lighting Set lighting of indoor unit Set Cancel Set Cancel the timer good sleep mode otet o e 059 Air Flow Smart Sensor Set the air flow to cool effectively Sellet Sm
56. th becomes longer try to minimize the piping length but make sure it is over 5 m gt Select the installation location where you can keep the S piping bending to maximum 10 spots j f gt Stated cooling performance is based on product with 5 m g HA gp p piping Install S trap for every m lt OneS trap must be installed on the low pressure pipe up to 6 m of piping elevation For piping elevation that exceeds 6m install S trap every CAUTION Maximum 6mor H Maximum allowable allowable piping less H piping length 20 m elevation 10 m orless or less Airguide 3 ot provided by 2 manufacturer RI unit leg Rubberleg Y Y m Spare space for piping When air guide needs to be installed to prevent the warm discharge air from disturbing the pedestrian refer to the illustration on the right side for installation 38 S east MEMORY IBIM EN 03955A 02 EN indd 38 2014 10 28 ES 12 00 58 Fixing outdoor unit Follow below method to firmly fix the outdoor unit gt Using rubber leg Put the rubber leg to the outdoor unit leg Refer to illustration on the right gt Using anchor bolt Anchor bolt fixing dimension Ona flat rigid ground use 4 anchor bolt M10 to fix the unit Anchor bolt should be 660mm purchased separately Selectthe anchor bolt that is long enough to securely fix the outdoor unit HSI
57. the cloth before cleaning to prevent indoor unit from being scratched by the foreign material on the cloth Ifitis difficult to clean the indoor unit heat exchanger on your own contact service center lt Do not clean the display using alkaline detergent caution lt Do not clean the surface with sulfuric acid hydrochloric acid or organic solvents thinner kerosene acetone or attach stickers It may damage the surface of the unit I Cleaning the outdoor unit heat exchanger gt When dust accumulates on the heat exchanger it may decrease cooling performance Therefore clean it regularly gt Spray water to clean the dust XY ee S3 acer ee eres vat e se RRR RRS saree S5 22o o vet ht i tet 5 S S5 lt S5 SOROS T RR Mee eR Re Bey _ SO mares 0S 6 gt ium S KOS see fit is difficult to clean the outdoor unit heat exchanger on your own nore contact service center x 8 a nee S a vet ares BRR LY aaa a aaa RE ve A ES MS xe VOS RRS Q lt Be careful with the sharp edges on the outdoor unit caution heat exchanger Heat exchanger 27 S east_MEMORY_IBIM_EN_03955A 02_EN indd 27 2014 10 28 25 12 00154 Cleaning the air conditioner Cleaning the Full HD filter Full HD filter filters the big dust of incoming air Pull out the Full HD filter in the arrow direction Remove dust with a vacuum cleaner or running gt Be
58. tioner operates outside of temperature and humidity range indicated below protective device may activate and stop the operation Mode Indoor temperature Outdoor temperature Indoor humidity Cool 21 C 32 C 21 C 52 C Relative humidity 80 or less Dry 21 C 30 C 21 C 52 C k Ifthe air conditioner operates in cooling mode for long period of time in high humidity area dew may be formed I Functions available for each model Model Name Smart Sensor ZERO Filter Virus Doctor Full HD Filter Lighting AF28FVSDA N e e e e e AF28FVZDA N e e e e The use of some function buttons on the remote controller may differ depending on the model When pressing the function buttons on the remote controller which are for a different model from the one purchased the icon of the selected function will be displayed but cannot be used with your air conditioner 12 S east MEMORY 1BIM EN 03955A 02 EN indd 12 2014 10 28 2 12 00 47 l Checking the name of the parts Your air conditioner may slightly look different from illustration depending on the model Indoor unit Display Arise automatically when turning on the air conditioner Smart sensor Camera Remote controller receiver HSII N3 Airinlet F Intake outdoor air Air control panel Move with selected air direction Full HD filter Zero filter Lighting Lighting is turne
59. void cutting your fingers wear thick cotton gloves when cleaning it Do not clean the inside of the air conditioner by yourself gt For cleaning inside the appliance contact your nearest service center gt When cleaning the internal filter refer to the descriptions in the Cleaning the air conditioner section Failing to do so may result in damage electric shock or fire 10 S east_MEMORY_IBIM_EN_03955A 02_EN indd 10 2014 10 28 2 12 00 46 Checking before use I Using indoor unit Make sure that curtain does not block the air inlet gt It may decrease cooling performance by blocking air circulation In Cool mode set the appropriate desired temperature gt If the desired temperature is too low it may be harmful for human body and power consumption will also increase Set the desired temperature about 5 C lower than the outdoor temperature When cooling the room use air conditioner and fan together to save energy gt When the air conditioner is used with fan cooling will be more effective and energy can be saved When the air conditioner is operating close the doors and windows gt When the air conditioner is used with open doors and windows cooling effect will decrease gt If you use the air conditioner for over an hour open the window to ventilate the air about once every hour Install the product away from sunlight or heating devices b Close the curtain when the sun shines gt Do not use any heati
Download Pdf Manuals
Related Search