Home

Samsung HG32AD590HW User Manual

1. AN Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock 56 Engish Securing the TV to the Wall Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows To avoid the TV from falling 1 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally 2 Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product In this case please purchase the screws of the following specifi cations 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly amp NOTE Install the TV near to the wall so that it does not fall backwards e tis safe to connect the string so that the clamps fixed on
2. Selected Channel Shows the currently selected channel name Number Shows the new channel number The currently allocated channel name is also displayed Name Shows the currently allocated channel name If there are no channels it is displayed as Empty If there is a channel but it does not have a name the name is represented as Warning Message Channel 9 1 has aready been use Channel to Channel 9 12 Yes e If an already allocated channel is selected If the new channel number has already been allocated to another channel the confirmation message pops up Refer to the figure below If the user wants to change the channel number to one that has already been allocated to another channel the channel numbers are swapped and saved Edit the Channel Number External Input 3 3 Edit Channel Number Selected channel 6 1 ABC O ese Nome HDMI 1 e 3 Red geset 0 9 Number U D Adjust EnjEnter Rel etum BO Engish Channel Manager gt Browser gt Tools gt Edit Channel Number Key Guide Button Action Nav Help RED If a user presses the button the channel number is initialized Reset ENTER Applies the changes and closes the window Enter RETURN Cancels or returns to the previous screen Tools Return U D Changes the channel number of the selected channel Adjust 0 9T Enters a digit Number INFO N R N R TOOLS Closes the current window and
3. OFF The REACH data is only updated on the TV at the REACH server update time Room Number Set the Room Number inr Server The version of REACH Server is displayed ersion Network Setup Set an IP address to establish an Internet connection Network SmartHub Model Set SmartHub Model Setting SmartHub Setting Set up SmartHub Widget Mode ON Widget Mode ON OFF Solution Type pis Select type of solution Vender Server SINC Server Server URL Setting Set server URL License Server IP Set server IP Widget Setting i Solution IPTV Mode ON IPTV mode On Off Virtual Standby mode On Off Virtual Standby OFF When Virtual Standby is On TV power consumption will be 9 5W to 17 4W Depending on the size of the TV screen Instant On OFF Setup booting mode Room Num Setting Set Room Number Enter Self Diagnosis Menu Self Diagnosis Picture Test Use to check for picture problems If the problem appears in the test picture for TV select Yes and follow the directions on the screen e Sound Test Use the built in melody sound to check for sound problems If the problem occurs during the test select Yes and follow the directions on the screen HD Function Check Menu On Executing Item Below OSD is displayed Proldiom DTV Channel Key Loss Ok Failure Hotel US STB SI Vendor i Setting SI Name Ok Failure Self Paa for Bathroom AMP Ok Failure Hotel EU RTC Ok Failure Hotel EU PC Audio Test Ok Failure System PC Self Test Ok Failure SW Upgrad
4. Select channel type 2 PETER pie show hotel Setup Mixed Channel Map On after P amp P TV shows hotel menu ATV or ADTV for Air CATV or CDTV for cable Select channel type 3 Setup Mixed Channel Map On Make TV power off amp on ATV or ADTV for Air Select smoovie TV in Hotel menu CATV or CDTV for cable 4 Make TV power off amp on Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup 5 Enter Hotel menu Select smoovie TV in Hotel menu Select ere FAR EE Select Satellite to auto tune 6 Select smoovie TV in Hotel menu Select Channel Setup Select Satellite to auto tune can ees CH Bank Editor be skipped 7 Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor After PUT m ree 8 Select Satellite to auto tune Setup CH Bank Editor Aner poe dinh 9 Setup CH Bank Editor After power off amp on user can use TV After power off amp on user can 10 use TV Channel List You can view channel information All TV Radio Data Other Analogue or Favourites 1 5 SI When you press the CH LIST button on the remote control Channel List screen displays immediately 9 Returr The displayed image may differ depending on the model All Shows all currently available channels TV Shows all currently available TV channels Radio Shows all currently available radio channels Data Other Shows all currently available MHP or other channels Analogue Shows all currently available analogue channels Fav
5. 1920 x 1080 Environmental Considerations Operating Temperature 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing Stand Swivel Left Right o Model Name HG32AD590 HG40AD590 Screen Size Diagonal 80 cm 100 cm Sound Output 10Wx2 Dimensions WxDxH Body 73 8 x 9 3 x 44 4 cm 90 5 x 9 1 x 52 5 cm With stand 73 8x19 1 x 50cm 90 5 x 19 6 x 56 2 cm Weight Without Stand 5 9 kg 6 4 kg With Stand 7 9 kg 7 3 kg Design and specifications are subject to change without prior notice For power supply and power consumption information refer to the label attached to the product 58 English Front view Side view J7 A A Vv CC TJ Y Unit cm 0 0 o 6 HG32AD590 78 8 44 4 50 9 3 19 1 HG40AD590 90 5 52 5 56 2 9 1 19 6 Engish 59 Jack panel detail Rear view Unit cm 9 e o 9 HG32AD590 20 0 20 0 26 9 11 6 18 9 8 8 10 5 48 3 HG40AD690 20 0 20 0 33 7 5 0 24 4 18 9 16 0 57 8 60 Engish Base Stand detail HG32AD590 Unit cm RO 9 ROS 152 19 1 HG40AD590 Unit c
6. 7864 www samsung com sg support AUSTRALIA 1300 362 603 www samsung com au support NEW ZEALAND 0800 726 786 www samsung com nz support VIETNAM 1800 588 889 www samsung com vn support THAILAND 0 2689 3232 www samsung com th support 1800 29 3232 MYANMAR 95 01 2399 888 www samsung com support MALAYSIA 1800 88 9999 www samsung com my support 603 77137477 Overseas contact INDONESIA 021 56997777 www samsung com id support 08001128888 PHILIPPINES 1 800 10 7267864 PLDT www samsung com ph support 1 800 8 7267864 Globe landline and Mobile 02 4222111 Other landline TAIWAN 0800 329999 www samsung com tw support JAPAN 0120 363 905 www samsung com jp support INDIA 1800 3000 8282 Toll Free www samsung com in support 1800 266 8282 Toll Free BANGLADESH 9612300300 www samsung com in support SRI LANKA 94117540540 www samsung com support EGYPT 08000 7267864 www samsung com eg support 16580 ALGERIA 021 36 11 00 www samsung com n africa support IRAN 021 8255 CE www samsung com iran support SAUDI ARABIA 8002474357 www samsung com sa support www samsung com sa en support English PAKISTAN 0800 Samsung 72678 www samsung com pk support TUNISIA 80 1000 12 www samsung com n africa support U A E 800 SAMSUNG 800 726 7864 OMAN 800 SAMSUNG 800 726 7864 KUWAIT 183 CALL 183 2255 www samsung com ae support English www samsung com ae ar support Arabic BAHRAIN 8000 GSAM 8000 4726 QATAR 800 CALL 800 2255 TURKEY 44
7. Last Country amp Genre No Guide Engish 33 amp NOTE e This section describes the layout of the Front UI that appears when the TV is turned on Factory Mode gt Genre Mode Enable e The genre is a sub list for each country The broadcast screen that was being displayed the last memorial channel lf user want to keep the previous country amp genre channel map press the BLUE RETURN and EXIT remote control key to close the Front UI amp ETC e Default Highlight Last Memory items Country Genre e Timeout 60 sec Elements No Name Description 1 Background Screen Displays the last memorized channel that appears when TV is turned on 2 Function Title This is name of the function 3 Current Status Display current settings the Country Genre The item for the country list is displayed 4 Country Items ui Peek ER Displays the last selected country The item for the genre list is displayed 5 Genre Items Displays available genre items by each country that master managed in factory mode always provide All item Displays the last selected genre 6 Highlight f the item title is too long to be displayed within the area Auto Text Sliding works Y Indicator This is displayed when there is a previous or next page 8 Nav Help The key guide is right aligned 34 Engish Highlight Interaction Country Items e This page is only to indicate possible interactions It ma
8. OOO IE Current status All Country Sports Country Genre ON A All Country All Rr Austria News Genre Mode change to Austria News RETURN Selim Dien FREUD Belgium French Entertainment EXIT Czech Sports France Hotel Germany Y Navigation Help Area ENTER RETURN e Ifthe country is selected highlight moves to genre menu auto matically Timeout Current Status Austria News e Current Genre Mode All Country Sports Engish 39 Power On Scenario Last Memory e This page is only to indicate possible interactions It may not be exactly identical to actual screens POWER Current Status Austria News SS Power Off e Current Genre Mode Austria News POWER ne My Channel 7 Current status All Country Sports 7 Gomnn Genre A All Country All Austria News Belgium Dutch Radio Belgium French Entertainment Czech Sports France Hotel Germany M Navigation Help Area Current Genre Mode Austria News 40 Engish Genre Editor This configures the genres of each of the hotel TV channels e This can be used through the Hotel Menu Factory e Supported genres include News Radio Entertainment Sports and Hotel More than one genre can be selected for each channel at the same time Country Editor Channel Editor This is the editor that configures the country for each of the hotel TV channels e Supp
9. OSD On Screen Display of your TV s feature appears Selecting the Source Selects the Source amp J by moving the controller in the function menu screen The Source list screen appears Selecting the SMART With the Function menu visible select SMART HUB 9 by moving the Controller HUB 9 upwards The SMART HUB main screen appears Select an application by moving the Controller and then pressing the Controller Power Off Selects the Power Off 5 to turn the TV off by moving the controller in the function menu screen S To close the Menu SMART HUB or Source press the Controller for more than 1 second Standby mode Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when the power button is such as when on holiday off It is best to unplug the power cord 10 Engish Viewing the Remote Control This remote control has Braille points on the Power Channel and Volume buttons and can be used by visually impaired persons Display and select available video Turns the TV on and off sources Have direct access to channels Electronic Programme Guide EPG Alternately selects Teletext Double display Mix a Cut off the sound temporarily Adjust the volume Change channels Display channel list on the screen Display the main on screen menu Switch to the HOME Screen ron View the Contents Home CLOCK Press to display
10. S When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG is not supported English 9 TV Controller TV Controller is a multi directional button that helps navigate without using the remote control Some functions which require a PIN code may not be available The product colour and shape may vary depending on the model amp Exits the menu when pressing the controller for more than 1 second When selecting the function by moving the controller to the up down left right directions do not press the controller If the controller is used first you cannot operate it to move the up down left right directions The image is drawn by facing the front side of the TV Remote control sensor Power on Turn the TV on by pressing the controller in standby mode Adjusting the volume Adjust the volume by moving the controller from side to side when the power is on Selecting a channel Select a channel by moving the controller up and down when the power is on Using the function menu Press the controller when the power is on and the function menu appears If you press it again the function menu screen disappears Using the Menu Selects the MENU IIII by moving the controller in the function menu screen The
11. Setting Auto Initialize is set to On and the power is turned off and on or the Master Setting Auto OFF Power is turned off and on the data is restored to the cloned values If there is no cloned Initialize value even when the Setting Auto Initialize is set to On it will be ignored and the operation will be the same as that when Setting Auto Initialize is set to Off 20 Engish Hotel TV Function Category Item Initial value Description ON The feature of REACH 3 0 in this TV becomes available REACH 3 0 OFF OFF The feature of REACH 3 0 in this TV becomes not available Assign a DTV channel number to carry the update REACH data This channel number must REACH Channel be the same as the number set on the Reach server Select the Group ID of the REACH server Refer to the REACH server manual for more Group ID All details ON The Ticker content is displayed Lie OFF args The Ticker content is not displayed Lets you set when data such as updated SW cloning files and S LYNC REACH contents is downloaded from the REACH server to the TV ren 1hour Every hour olution Ra date 1hour 2hour Every 2 hours 12 00 am Every 12 00 a m 12 00 pm Every 12 00 p m 2 00 pm Every 2 00 p m ON Whenever the TV enters standby mode the power cord is plugged in and the power is lr eb ra OFF loff the REACH data is updated on the TV
12. displays the Tools menu No Guide EXIT Cancels and returns to the previous step Factory Mode No Guide SD NOTE This function allocates an external input source to a channel number The changes are applied to all the channels e fthe new channel number has already been allocated to another channel follow the Hotel specifications amp ETC Default Highlight Channel number area Vertical circulation is supported e Timeout 60 sec Elements No Name Description Channel Number Area Source Name Nav Help Area The channel number area Both the numeric keys and the Up Down keys are supported fno value is allocated as many are displayed as the number of digits A A gt 1 gt 15 v v External input name Items that cannot be configured are disabled If a user presses the red button the channel number is initialized Engish 51 Edit Channel Name Edit Channel Name Enter new name for CH 10 Max Length 5 Channel Manager gt Browser gt Tools gt Edit Channel Name Key Guide Button Action Nav Help GREEN Saves the changes and returns to the Channel Manager Done ENTER Saves the channel name and moves the cursor to the next field Enter RETURN Cancels and returns to the previous screen Tools Return U D L R Navigates on the keyboard Move 0 9 Enters a digit No Guide INFO N R N R TOOLS Closes the current
13. hotel mode is set by default and Standalone mode is set OSD is displayed for 3 seconds TV enters into RF mode automatically after displaying Standalone mode is set OSD for 3 seconds When Interactive mode is selected the Interactive Setup Menu appears Press the power off button to exit from the Interactive menu When Standalone Plug amp Play mode is selected the Select Menu Language OSD is displayed e Select Menu Language OSD When Standalone Plug amp Play is selected from Easy Set Up OSD Select Menu Language OSD is displayed Initial Highlight English Display time OSD timeout and operation are the same as Samsung s consumer TV models f the ENTER button is pressed Select Area OSD is displayed e Select Country Initial Highlight United Kingdom The Country OSD is displayed and the area can be selected e Clock setting OSD Display time 30 seconds The Clock Set item OSD is displayed If ENTER button is pressed after setting the clock or in Auto Picture Mode OSD is displayed e Auto Search Mode OSD If skip option is selected this goes to Clock setting OSD Ifthe ENTER button is pressed auto searching of channels is performed The OSD Display time from the time that Auto Store is started to the time that Auto Sort is completed is 30 seconds e Picture Mode OSD Initial Highlight Standard The Picture Mode OSD is displayed and the Dynamic or a Stan
14. information on the TV screen CLOCK When you press INFO key in standby mode TV screen displays the time Quickly select frequently used functions Select on screen menu items and change menu values Return to the previous menu Exit the menu Buttons in the Channel list Contents Home menu etc ALARM Enter the hour you want the TV to turn on amp amp Turns the 3D image on or off Not available SUBT Displays digital subtitles Use these buttons in the Contents Home SAMSUNG English 11 Installing batteries Battery size AAA amp NOTE Use the remote control within 7m of the TV Bright light may affect the performance of the remote control Avoid using nearby special fluorescent light or neon signs The colour and shape may vary depending on the model e Remote control button HOME amp 3D are not supported When pressing these buttons the TV unit does not respond 12 Engish Connecting the TV with SBB TV Rear Panel ETH MODEM BG Ha J d Data Cable DATA wl a ra leas 1 Connect the DATA jack of the TV to the ETH MODEM jack of the STB SBB with the Data cable Use data communication List of Vendors and Compatible Data Cables Supplied with the TV e Confirm that you are using the correct data cable for your vendor Refer to the code label on the data cables C pm 6 CONB Engish 13 Connect
15. the TV amp Progress the assembly of screw in the manual s order NOTE Make sure to distinguish between the front and back of each component when assembling them Make sure that at least two persons lift and move the TV Engish D D Hotel Mount Kit Short Bolt 2EA Long Bolt 2EA Nut 2EA Bolt 4 Nut Washer 2EA Top Affix the stand to a flat surface such as a dresser top desk top or entertainment centre as shown AN WARNING To prevent injury you must attach this TV securely to the floor a table a dresser top etc with the Hotel Mount Kit as described in these instructions 6 English Viewing the Connection Panel HDMI IN HG32AD590 2 ARO DV HG40AD590 DNINOT2 VS 0 AS gt ISN 1 DVI 2 ARC HDMI IN PC DVI AUDIO IN Whenever you connect an external device to your TV make sure that power on the unit is turned off S When connecting an external device match the colour of the connection terminal to the cable Engish 7 USB HDD 5V 0 5A CLONING USB 5V 0 5A CLONING Connector for software upgrades and Media Play etc Service connection RJP This port is an RJP Remote Jack Pack communication port that enables connecting different de
16. the selected country is registered or not 2 Guide The message is displayed after the completion of the operation This message is always displayed if the OK button is selected Selected channel 6 1 ABC Number Name ABC 0 9 Number U D Adjust En Enter Re Return e Channel Manager gt Browser gt Tools gt Edit Channel Number Key Guide Button Action Nav Help ENTER Applies the changes and closes the window Enter RETURN Cancels and returns to the previous screen Tools Return U D Changes the channel number of the selected channel Adjust 0 9 Enters a digit Number INFO N R N R TOOLS Closes the current window and displays the Tools menu No Guide EXIT Cancels and returns to the previous step Factory Mode No Guide NOTE e This is the function that changes the channel number Swap Type e Channel numbers can be changed in all the channel lists and changes are applied to all the channels e f the new channel number has not been allocated to another channel the channel number is updated to the new channel number and the list is sorted again in ascending order of channel number e fthe new channel number has already been allocated to another channel follow the Hotel specifications ETC Vertical circulation is supported English 49 Elements No Name Description Edit Channel Number Window e Both the numeric keys and the Up Down keys are supported
17. window and displays the Tools menu No Guide EXIT Cancels and returns to the previous step Factory Mode No Guide S NOTE e This is the definition of the keypad that is used for the Edit Channel Name function amp ETC e Timeout 60 sec Elements No Name Description 1 Channel Name Edit Window The cursor and the character that are currently being entered are in the same colour as 2 Channel Name the highlight e When the maximum number of characters is reached the cursor disappears 3 Keyboard e Fora detailed scenario refer to the keypad design document D2 Engish Tools Edit Mode Add to Countries Channel Nome Edit Edit Channel Number Video Mute Channel Copy Reorder Select All EnjEnter RejRetum Edit Mode Content Highlight when the number of the checked item is O or 1 When there is more than one checked item Add to Countries Edit Countries when an already registered item is checked Channel Name Edit Edit Channel Number Video Mute Channel Copy Astra HD Reorder Satellite Select All Deselect All this is only displayed when 1 or more items are selected Delete amp NOTE The position of the popup menu The Tools menu for displayed on the right The Tools menu for an item in the left selected Add to Countries Edit Countries when an already registered item is checked Video Mute Reorder Satellite Select All Deselect All Del
18. 4 TT 11 www samsung com tr support JORDAN 0800 22273 www samsung com Levant support English 06 5777444 SYRIA 18252273 www samsung com Levant support English MOROCCO 080 100 22 55 www samsung com n africa support 2015 Samsung Electronics Co Ltd All rights reserved AD590 Asia ENG 62
19. Item Initial value Description When USB is connected to the TV USB Pop up Default Default A popup window appears Screen Automatic This Enters the USB content menu automatically External Disable Nether the pop up window nor the menu appears Sites Users can set External Source Banner to On or Off Etema Source ON When TV power is On or the Mode changes the TV will displays the external source Banner ON banner OFF When TV power is On or the Mode changes the TV does not display the external source banner OFF Auto Source is Off ON When an external source is connected to the TV the TV will auto ident and switch the Auto Source OFF External input source Source PC Auto Ident PC Input only Anynet Return Power On Select the return TV source after stopping an Anynet HDMI CEC connection This fuction Source Src is especially useful for the Guestlink RJP Determines the Sub AMP operation mode 0 Turns the Sub AMP function off PWM off Beavers Sub AMP Mode 2 ST Determines the a volume according to the main volume control That is the sub volume is determined according to the Power On Volume the Min Volume Speaker and the Max 2 Determines the volume according to the bathroom control panel setting Sub AMP Volume 6 Sub AMP Volume level at power on initial condition ON When the Headphone is connect to the TV allows you to listen to audio through the TV s speakers and the connected headphones si
20. LED IV Installation manual Thank you for purchasing Samsung product To receive more service please register your product at www samsung com register Model Serial No SERIES Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice This TV is provided with interactive functionality through a set back box SBB STB connected to the TV and with other TVs in a computer controlled system for hotels and other hospitality businesses Interactive When the TV is powered up initially it sends a command to identify the SBB STB if identified the TV switches to ONLINE mode and full control is through the SBB STB If the TV is in ONLINE mode it stops receiving IR Samsung remote commands and acts according to interface protocol Stand Alone If SBB STB is not identified the TV should be switched to STAND ALONE mode with restricted operation Operational Modes When this TV in Hotel mode is operated with a SBB STB it is in one of two states ONLINE or STAND ALONE In the STAND ALONE state the TV will act as a Hotel TV but without active communication This is to prevent guests from trying to cheat the system by disconnecting the SBB STB EX Hotel TV Stand alone Hotel Mode On SBB STB Online if Mode one success within 10 attempts SBB STB SBB STB Power Online 10 Status O
21. N consecutive Attempt fails every 2secs Online Mode Poll Rate 20 sec To set the details for Stand alone or interactive mode refer to pages 19 22 Setting the hotel option data Stand alone mode and Interactive mode e Some operations may be restricted to prevents guests from cheating the TV system No main menu Interactive mode or Channel Menu Plug amp Play in Main Menu Stand Alone mode e Limited Volume and Panel key lock or unlock Still image warning Avoid displaying still images like jpeg picture files or still image element like TV Program logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause uneven wear of screen phosphor which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout Refer to the relevant user manual section for details Securing the Installation Space Keep required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may resul
22. No Name Description e When the user enters this screen the currently selected default item is highlighted e The Country Icon Category Name are provided If the highlight is in the Main Frame only the icon is displayed Moving the highlight Pressing the up or down button moves the highlight If the items cannot be displayed on one page up and down indicators are provided Once the highlight is moved to a category the channel list corresponding to the corresponding category is loaded to the Main Frame Left Frame Country Categories Antenna Mode Activation Standard Category Ch Mode Description Air Cable Satellite Lists all the channels registered by the Auto Original Tuned Registered O O Tune operation Country All Country O O tte Provides the list of channels and sources Hotel Country 1 o o specified in the Registered Channels list e All Country is the sum of all channels regis tered to each country This is only provided to end users Country 2 O O Tools Registered Countries Categories Enjenter Re Return e Channel Manager gt Channel Category gt Tools gt Info Registered 3210 Austria 400 Beigium Dutcn 700 Beigium French 0 Czech 60 70 80 v a The items are displayed without Channel e If the Registered Country item in the Left Frame is highlighted you can enable the corresponding window by pressin
23. Sports Eastern Europe Sports RASIGA Hotel Other Hotel LB E v taus English 35 Highlight Interaction Default Genre e This page is only to indicate possible interactions It may not be exactly identical to actual screens My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre ENTER RIGHT A All Country All pa All Country All Austria News Austria News Belgium Dutch Radio Belgium Dutch Radio Belgium French Entertainment 4 Belgium French Entertainment Czech Sports LE Czech Sports France Hotel France Hotel Germany Germany v v Navigation Help Area Navigation Help Area e The current selection of the country is high lighted e Default High light The current selection of the genre My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre A A All Country All All Country All Austria News ENTER RIGHT Austria News Belgium Dutch Radio Belgium Dutch Radio Belgium French Entertainment Belgium French Entertainment Czech Sports Czech Sports France Hotel LEFT France Hotel Germany Germany v Y Navigation Help Area Navigation Help Area e Seems source error it should be read as The other item of the county is high lighted Please verify ex France 36 Engli
24. V is turned on it displays the channel it was displaying when it was turned off Power On Channel Num 1 When the TV is turned on it switches automatically to this channel Power On Channel Type ATV Select channel band AIR analogue air band DTV digital air band CATV analogue cable band CDTV digital cable band Power On Volume Last Saved User Defined Lets you set the Power On Volume manually See Power On Volume below ast Saved When the TV is turned on it returns to the volume that had been set when the power had been turned off Power On Volume Num 10 The TV turns on with this Volume Level in Stand Alone Hospitality mode Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode Max Volume 100 The maximum Volume Level the user can set in Stand Alone Hospitality mode Power On Source TV Select the input source the TV displays when turns on Power On Option Last Option Determines the TV s state when power returns after a power failure or after you have unplugged the TV and then plugged it in again Last Option Returns to its last Power state If it was in Stand by it returns to Stand by If it was on it turns on Power On When the power returns the TV turns on e Standby When the power returns the TV enters the Standby mode Channel Channel Setup Gives you direct immediate access to s
25. annel type 2 After PP TV shows hotel menu Setup Mixed Channel Map On After PSP TV will show hotel NIV or ADTV for Air menu CATV or CDTV for cable Select channel type Select smoovie TV in Hotel 3 Setup Mixed Channel Map On TV power off amp on ATV or ADTV for Air men CATV or CDTV for cable Select smoovie TV in Hotel 4 Make TV power off amp on Enter Hotel menu meni Select Channel Setup i i Select Channel Setu Air or 5 Enter Hotel menu Select smoovie TV in Hotel p Select Air or Cable to auto menu can be skipped tune Select smoovie TV in Hotel Select Air or Cable to auto 5 6 menu Select Channel setup tune can be skipped setup 6H Bank Editor After power off amp on user can 7 Select Channel Setup Select Air Cable to auto tune Setup CH Bank Editor use TV After power off amp on user can use TV 8 Select Air Cable to auto tune Setup CH Bank Editor After power off amp on user can 9 Setup CH Bank Editor use TV After power off amp on user can use TV 30 Engish Smovie TV used Satellite Step Mixed Channel Map On Satellite and Air or Cable both usedused Only Satellite used If the tv starts with Hotel P amp P If P amp P already done If the tv starts with Hotel P amp P If P amp P already done 1 Do the P amp P except channel store Enter Hotel menu Do Fanal hg pseu Enter Hotel menu
26. c 3 9 Sec 7 8 Sec E g If the RJP has all its live sources AV PC and HDMI connected AV is viewed as the highest priority If the RJP is in HDMI mode and a guest removes and reconnects the AV the minimum time required to switch to the AV is 6 5 seconds To connect audio Ipod or Mp3 Music mode should be ON and Jack Ident detect should be OFF A V PC and HDMI input sources are supported English 17 Setting the Hotel Option Data To Enter Press the MUTE 1 1 9 ENTERCS buttons in order From the Hospitality mode the Standalone mode is set To Exit from this menu power off and turn on again Depending on Model and Region some menus do not exist on the TV set Hotel TV Function Category Item Initial value Description Hospitality Mode Hospitality Mode Standalone Select Hospitality mode nteractive mode TV works with an SI STB or SBB Standalone mode TV works alone without an SI STB or SBB SI Vendor SI Vendor OFF e Interactive mode Samsung OCC MTI Nstreams Enseo Cardinal Guestek Seachange MDC Innvne e Standalone mode Smoovie Power On Power On Channel Last Saved Set the default values that will be applied when the TV is turned on User Defined Lets you set Power On Channel and Channel Type manually See Power On Channel and Channel Type below Last Saved If you select this item when the T
27. creens 6 6 o My Channel Current status All Country Sports Country Genre 1 a ENTER All Country All Austria News Genre Mode change to Austria News Eelen Luite Rase Belgium French Entertainment Czech Sports France Hotel Germany Y Navigation Help Area e The genre mode change complete message is displayed e Pressing the left key from the genre to country menu highlights e Timeout 5 sec an existing selected country item ENTER RETURN Timeout Current Status Austria News 38 Engish Mode Change Interaction 2 1 2 e This page is only to indicate possible interactions It may not be exactly identical to actual screens 0 My Channel My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre A A All Country All DOWN All Country All Austria News Austria News Belgium Dutch Radio Belgium Dutch Radio Belgium French Entertainment lt Belgium French Entertainment Czech Sports UP x5 Czech Sports France Hotel France Hotel Germany Germany y Y Navigation Help Area Navigation Help Area e Current Genre Mode All Country Sports ENTER RIGHT My Channel
28. dard Picture mode can be selected After selecting the picture mode and the TV enters Standalone Setup Menu OSD press power off to exit English 27 Cl Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TV with one remote This is useful where there is more than one TV in a location such as in a hospital the set ID number is displayed in the source osd It is possible to support up to 9 different remote key transmissions for multiple codes Each TV has an initial code of O The ID code can be set and reset in Analogue TV mode or PC mode not available in TTX channel or DTV channel ID code can be from 0 to 9 Press the MUTE button and the RETURN button simultaneously for more than 7 seconds and then select the number button to set the code Set ID OSD appears The following words appear Remote control code is set to X If you want to change the Remote control code enter the chosen digit X is the digit number This OSD displays until Exit is pressed Remote control code is set to 0 If you want to change the Remote control code enter the chosen digit For example TV and Remote will be set to ID code 1 if the user presses 1 The following words appear Remote control code is changed to 1 At this point the TV can be controlled only by the remote with the same ID code as the TV TV the following words will be displayed TV ID x x is the TV
29. e SW USB Update function Service Pattern OFF Same function with SVC Service Pattern ON TV speaker sound will be mute Sound will come out through HDMI Sound Bar Out OFF You must connect the Sound Bar to hear the sound OFF Sound will come out through TV speakers normally Display the web site of related Samsung service center software version and Mac address Contact Samsung information when the TV has a problem When the TV is in standby mode you can configure the settings of external LED Standby LED OFF ON The LED is on OFF The LED is off TV Reset Returns all settings on the TV to their factory defaults Engish 21 Welcome Message The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room Welcome message settings are found in the Hotel Option Menu Welcome message should be ON in order to display the message on power on Hospitality Mode Standalone Network SI Vendor OFF Widget Solution Power On System Channel Menu OSD Glock Welcome Message Music Mode Remote Jack Pack Hospitality Logo External Source Bathroom Speaker HP Management Eco Solution Cloning REACH Solution A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service menu The following is the list of characters supported by Welcome message amp Capital letters from A Z Welcome message can be edited b
30. ecified time OnOff Disable the Alarm function To get music output from an mp3 audio player through an AV Input Source When on Music Mode AV OFF you can hear sound from the player through the TV even there is no video signal The TV s backlight however remains on And add a video signal it works normally Music Mode To get music output from an mp3 audio player through a PC Input Source When on you Music Mode PC OFF can hear sound from the player through the TV even there is no video signal The TV s backlight however remains on And add a video signal it works normally Music Mode fs gt Backlight OFF Backlight On Off option in Music mode to save energy ia If the jack priority is set the corresponding source is automatically set when a jack is inserted Priority AV 1 Kaka according to the jack priority If the jack priority is set the corresponding source is automatically set when a jack is inserted Priority PC 2 Bah Remote Jack according to the jack priority Pack j iority i i i i jack is i Priority HDMI 3 If the jack priority is set the corresponding source is automatically set when a jack is inserted according to the jack priority AV Option AV Select RJP AV Source Source selection depends on Model HDMI Option HDMI 1 Select which HDMI source of the TV is connected to the RJP jack HDMI1 HDMI2 HDMI3 Engish 19 Hotel TV Function Category
31. essages regarding Active Inactive sources The TV will switch to the Active external source according to the priority set by the User You can select HDMI IN 1 DVI 2 ARC and AV IN for connecting RJP When the TV is on connect the TV and the RJP within 10 seconds 16 Engish The RJP can be returned to the factory default settings by pressing the A V and HDMI buttons simultaneously for 10 seconds All LEDs blink 5 times to acknowledge that this has been finished The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart If the guest then touches another source button the TV will change to the selected source and the corre sponding LED will be lit e After an RJP Reset or a TV Power OFF ON it takes approx 10 seconds to establish communications between the TV and the RUP e The following table shows the approximate time in seconds to switch from the TV to the input source based on the priority Scenario 1 When no inputs are connected Source To Connect AV 2 Sec PC 0 7 Sec HDMI 3 9 Sec S Scenario 2 Whe n two or more inputs are connected and an Input source is disconnected and then reconnected Source Disconnect To Connect Total AV 4 5 Sec 2 Sec 6 5 Sec PG 0 7 Sec 0 7 Sec 1 4 Sec HDMI 3 9 Se
32. ete an item in the left column of the Channel List This is he right column of the Channel List This is displayed on If a user presses the Tools button when the highlighted item is not selected the item is automatically marked as For detailed specifications of each function refer to the NEO Channel Manager Engish 53 CH Banner when a channel number is allocated to an external input Broadcasting S NOTE e The TV channel banner specifications are applied e When there is an unsupported item or there is no corresponding information the item values are not displayed The channel name is represented as the external input name Elements No Name Description 1 External Input Name The Channel List provides access to functions related to GenreTV Country Mode Changes the genre mode fil Mixed Channel Map Mixed Channel Map is a function to mix Air Cable and Satellite channels Except for Aus Singapore NZ models Mixed channel Map should be ON in order to mix Air Cable and Satellite channels Use Channel Editor to sort the channels after turning on Mixed channel Map in Hotel Option Menu BA Engish D Sound Bar e Samsung Sound Bars and Hospitality TV Use Samsung Sound Bars and hospitality TVs support the ARC feature in HDMI 1 4 If you connect a compatible Samsung Sound Bar to a compatible Samsung hospitality TV using a single HDMI cable guests can listen to theTV s sound t
33. g the INFO remote control key e All countries are displayed navigate country items by pressing the up or down key Indicators are provided 42 Engish amp NOTE e This is a definition of the Tools menu in the Left Frame Category Only the Info item for each Register Country is provided Elements Category Tools menu Descriptions Registered Country Information Registered Channels The number of channels of each country e The items are displayed without Channel Error Cases No stored channels found Please run Auto Tuning o amp NOTE e This is the message for when there are no saved channels in the Registered Channels list Elements No Name Description When entering the browser if the Registered channels item is empty a popup message is displayed which enables users to switch to the Auto Store Programme menu 1 Message When both the time and the channel are not configured and a user enters the Channel Manager a message that allows the user to switch to the Auto Tuning Auto Program operation is displayed in the same way as above A Set the current time and date first e This is the message when the time is not configured If the time is not configured the message is displayed in Factory Mode before entering the Channel Manager Engish 43 amp NOTE e This is the component for when there are no channels registered to the country category Element
34. gs If you allow guests access to the guest side menus for example the Picture menu they can change the settings in those menus so they are no longer standard If you set the Setting Auto Initialize function to on the TV automatically restores initializes any guest side menu values to the cloned standard values when the TV is turned off and then turned on again Note that Setting Auto Initialize works on cloned guest side menu values only Settings which have not been cloned are ignored The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to on Menu Menu Item Menu Menu Item Picture Mode Accessibility Backlight Audio Description Contrast Subtitle Brightness Menu Transparency Sharpness High Contrast Colour Enlarge Tint G R Football Mode Apply Picture Mode Menu Language Picture Size Smart Control Settings Picture Size Motion Sensitivity Zoom Position Touch Sensitivity 4 3 Screen Size Onscreen Remote Size Auto Adjustment Voice Control PC Screen Adjustment Language Coarse Use TV Voice Fine Voice Gender Position Device Manager Image Reset Keyboard Settings Picture PIP Mouse Settings Advanced Settings System Time Dynamic Contrast Clock Black Tone Sleep Timer Flesh Tone Alarm RGB Only Mode Eco Solution Colour Space Energy Saving White Balance Eco Sensor Gamma No Signal Power Off Motion Lighting Auto Power Off Picture Options Smart Security Co
35. he maximum length of the channel number follow the regional specifications Channel list icon representation rules Item Example Priority Dynamic Sl Channels deleted by X Channels that have been deleted by the Dynamic 1 Icon Dynamic SI ES voee cH NAME SI but not by the user Channels added by W e Channels that have been added by the Dynamic 2 Dynamic SI A NNNNNNNN CH NAME SI but not by the user Analogue Channel Icon A m NNNNNNNN CH NAME The The Analogue channel icon is displayed 3 edited channel name Source Channel Icon S NNNNNNNN CH NAME e Achannelthat is an input source 4 Antenna Icon Air ir NNNNNNNN CH NAME e Represents the live channels from the anten Cable O NNNNNNNN CH NAME nas The Air Cable or Satellite antenna icons are 5 displayed with the lowest priority Satellite L_J setetite NNNNNNNN CH NAME The scrambled channel icon This appears for the _ Scrambled Channel Icon NNNNNNNN CH NAME On Satellite antenna Video Mute amg e Ascreen muted channel Audio and channel NNNNNNNN CH NAME information is provided AG Engish Add to Countries Edit Countries 1 2 l Add to Countries 2 Select me country s to add the selected channel s to from Selected channel 1111 111 ABC Austna Beigium Dutch _ Cancel U D L R Move EnjErfer Re Retum D e Channel Manager gt Browser gt Tools gt Add to Cou
36. hed successfully Failed copy was not finished successfully No USB USB is not connected Cloning from USB to TV This to downloads the stored data in the USB device to m TV set 1 Insert a USB drive into the USB port on the rear of the TV 2 Enter the Interactive menu by pressing buttons in order MUTE 1 1 gt Saya nag mai SE 9 ENTER 3 Press the A or V button to select Clone USB to TV then press the ENTER button When the message Clone USB to TV is displayed then press the ENTER button 5 You can Make sure USB cloning behavior n Progress copying data to TV Completed copy finished successfully Failed copy did not finish successfully No USB USB is not connected e No File there is no file to copy on the USB S Activate copying from USB to TV by pressing ENTER key for 5 seconds amp The Hotel TV product family does not support the CLONE function between models that supports the satellite T2 operation and models that do not For fast instant cloning during installation insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds 24 Engish li Setting Auto Initialize When you clone settings from one TV to another you clone both the guest side menu and hotel side menu settings Picture Sound Input Channel Setup and Hotel Setup This lets you set nearly all of the menu values on your hospitality TVs to the same standard settin
37. hows the channel or the source list of the currently selected category 2 Scroll Bar e Shows the position of the current page amongst the total amount of pages This is displayed whenever a user enters the Channel Manager If a user exits and 3 Navigation Help Area then reenters the Channel Manager it is displayed again This disappears when the timeout 5 sec is reached or a user presses a key 4 Navigation Help Area The currently configured country information and the RED buttons are left aligned They are displayed and navigated by group graphically The key guide is right aligned English 45 Channel Common Elements Icon method Channel list representation rules Standard Item Construction Digital channels Check Box Status Icon Digital Channel Number Channel Name Channel number representation format The channel number is represented by ATSC Analog channels Digital channels Check Box Analog Icon Analog Channel Number Channel Name Channel number representation format is not used to represent analog channel numbers Check Box Status Icon Digital Channel Number Channel Name Channel number representation format For the maximum length of the channel number follow the regional specifications DVB CHEM Analogue channels Check Box Analog Icon Analog Channel Number Channel Name Channel number representation format For t
38. hrough the Sound Bar Models supporting the ARC function are listed below e Sound Bars HW H450 H550 H570 H600 H7500 HW J450 J470 J550 J6000 e Setting the Sound Bars to Hotel Mode 1 Set the following Hotel menu options Hotel option gt External Device gt Sound Bar Out On Hotel option gt Power On gt Power On Volume EN User Defined Hotel option gt Power On gt Power On Volume gt Set greater than O Hotel option gt Power On gt Max Volume gt Set greater than O 2 Connect an HDMI cable from the HDMI OUT jack on the back of Sound Bar to the HDMI1 port supporting ARC on the hospitality TV 3 After the Sound Bar is connected to the hospitality TV when the TV turns on the Sound Bar automatically detects the TV and then automatically switches to Hotel Mode Sound Bar Hotel mode functional characteristics Power On Off is synchronized with the TV HDMI_CEC defaults to On Functions through the HDMI OUT port only Disables the Input mode key on the VFD to prevent unexpected audio source changes Acquires adjustable Power On and Max Volume settings from the TV s Hotel option menu The Sound Bar s Power On Volume and Max Volume values however are 72 of the Power On Volume and Max Volume settings in the TV s Hotel option menu Example If the TV s Power On Volume 20 and Max Volume 90 then the Sound Bar s Power On Volume 10 and ax Volume 45 This function may differ de
39. ing the Bathroom Speakers You can connect the Bathroom Speakers using the following method Audio Loop In An additional Headphone Box can be installed on a bed or business desk for added convenience The installation procedures are given below e Detailed Drawing of the Headphone Box TV Rear Panel HEADPHON BOX Headphone Box Shield wire Red Wire Audio R c hl Ht Whitewire Audio L CI Red wire White wire a Shield Wire Headphone Box TV Headphones jack TV HP ID jack 14 Engish Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk MediaHub HD Rear HDMI USB RS 232 TV Rear Panel SNINO1D ANO gt JSN 4 RS 232 1 DVI 2 ARC t i HDMI IN Data Cable 2 HDMI cable 1 Connect the RJP port of the TV and the RS 232 port of the MediaHub HD 2 Connect the HDMI IN 1 DVI 2 ARC port of the TV and the HDMI port of the MediaHub HD e MediaHub HD The MediaHub HD is a hardware module that has different Audio Video inputs A V Audio PC HDMI and USB and corresponding outputs The corresponding output sources connect from MediaHub to the TV MediaHub communicates with the TV via RS232 Hot Plug amp Play is a function that allows hotel guests to connect an external source t
40. is a mismatch between the data in the channel map and the transmitted data the TV autotunes the channels to restore the data parameters in the channel map ON When Channel Rescan Message is ON the OSD showing that the channels are being rescanned will be displayed to Hotel Guests OFF A Hotel Admin can turn the Channel Rescan Message OFF if the rescan message OSD should not to be displayed to Hotel Guests 18 Engish Hotel TV Function Category Item Initial value Description OFF If Pan EURO MHEG is set to Off MHEG runs according to the existing product specifications Pan Euro MHEG OFF ins e ON If Pan EURO MHEG is set to On MHEG is ON regardless of the product specifications or region Mychannel OFF Enable or disable the Mychannel feature Genre Editor Edith the genre for channels Available when Mychannel is On This function turns the function On Off that automatically turns on the subtitles in a specific country This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is Channel heading to Europe Subtitle Auto On OFF This function is related to France s subtitle specification The rest of the countries subtitles function according to the appropriate country specifications regardless of the Subtitle Auto On function ON When the Subtitle Auto On function is ON it follows France s subtitle
41. ish 3 Accessories Please make sure the following items are included with your LED TV If any items are missing contact your dealer The items colour and shapes may vary depending on the model e Remote Control amp Batteries AAA x 2 Power Cord Data Cable e Quick Set up Guide Owners Instructions e Hotel Mount Kit Safety Guide Not available in all locations Cable Holder The stand and stand screw may not be included depending on the model The Data Cable may not be included depending on the SI Vendor 4 Engish Installing the LED TV Stand The 32 and larger LED TVs have swivel stands You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right Stand Components When installing the stand use the provided components and parts A 1 EA oo x8 M4 XE 40 Stand Screws HG32AD590 HG40AD590 32 40 mm mm x4 M4 X Top View Front 547 77777 a 4 e 1 DONOTUSE DONOTUSE DO NOT USE CHEMICALS GREASE OL Side View amp Place a soft cloth over the table to protect the TV and then place the TV on the cloth screen side down Sa Insert the Stand Guide into the slot on the bottom of the TV Correct assembly Incorrect assembly When the declination happened try reassemble it category E amp Make sure to y p X assembling stand guide attached on
42. ll 1 Press the TOOLS button in Channel List screen then select the Edit Mode A check box appears to the left of the channel 2 Press the A V buttons to select the desired channel then press the ENTERCL button The w mark indicates the channel you ve selected You can select more than one channel amp Press the ENTERCS again to deselect the channel 3 Press the TOOLS button then select a function and change its settings Edit Favourites Set the selected channels you watch frequently as favourites amp The Edit Favourites screen has five groups Favourites 1 Favourites 2 etc You can add a favourite channel to any one of the groups Press the A buttons to select a group e Lock Unlock Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set to On S The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option Delete You can delete a channel to display the channels you want Deselect Deselect the selected channels Select All Select all the channels in the channel list Q2 English D My Channel Determines the country and genre for the channels provided by the hotel and if the user selects a country and genre shows the corresponding channels e You must select the country first or you can not set a genre e f you select the genre without addi
43. lour Tone Auto Protection Time Digital Clean View Change PIN MPEG Noise Filter General HDMI Black Level Game Mode Film Mode Sound Feedback LED Clear Motion Boot Logo Picture Of Samsung Instant On Reset Picture Anynet HDMI CEC Sound Mode DivX Video On Demand Sound Effect DTS TruSurround HD DTS TruDialog Equaliser Speaker Settings Sound Additional Settings DTV Audio Level Audio Format Audio Delay Dolby Digital Comp Auto Volume Reset Sound Engish 25 Plug amp Play Hotel Plug amp Play automatically performs Hotel mode selection Country Setup Clock Setup and Picture mode Setup Hotel Plug amp Play is available only one time when power is first turned ON This is available after first setting up the TV and transferring Clone TV data to a USB drive To use next TV you only need to exit Hotel Plug amp Play connect the USB then Clone the USB to TV Depending on model and region some menus may not exist If you select 0 If you change the country Change of the Current Location i The TV is automaticaly turned off and on If you select Skip Easy Set Up alone Only End Setup If you select Standalone Setup Date Time Time Zone DST luto Tuning Tunir uto Tuni Y Both Aerial Tem Terrestrial Cable rabi Channel Type Digital amp Analogue 26 Engish e Plug amp Play OSD Initial Highlight Interactive If Standalone Only button is selected Standalone
44. m 383 NN post NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors Engish 61 Licence DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories Manufactured under a license from U S Patent No s 5 956 674 5 974 380 5 978 762 E 6 487 535 6 226 616 7 212 872 7 003 467 7 272 567 7 668 723 7 392 195 7 930 184 7 333 929 and 7 548 853 DTS the Symbol and DTS and the Symbol Premium Sound 5 1 together are registered trademarks amp DTS Premium Sound is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved Manufactured under a license from U S Patent No s 6 285 767 8 027 477 5 819 718 e dts 5 333 201 5 638 452 5 771 295 5 970 152 5 912 976 7 200 236 7 492 907 8 050 434 7 720 240 7 031 474 7 907 736 and 7 764 802 DTS the Symbol and DTS Studio Sound and the Symbol together are registered trademarks amp DTS Studio Sound is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are KE LJ mil trademarks or registered trademarks of HDMI Licensing LLC in the United States and
45. multaneously But you can only adjust HP Mode OFF the volumes of TV speaker HP OFF When the Headphone is connect to the TV allows you to listen to audio through the Management connected headphones only Default HP Volume 10 Configure the values of headphones volume when HP MODE is set to ON Main Speaker ON e ON Plays the TV sound through the TV speaker e OFF Plays the TV sound through the headphones only Adjusts the brightness of the TV to reduce power consumption Off Turns off the energy saving function Eco Solution Energy Saving Off Low Sets the TV to low energy saving mode Medium Sets the TV to medium energy saving mode High Sets the TV to high energy saving mode Welcome Message OFF Displays on Welcome Message koit Welcome Edit the Welcome Message Message Turns the Hospitality logo feature On or Off if On when the TV isturned on the Logo is Hospitality Logo OFF displayed before the signal from the initial source for the amount of time set in Logo Logo Display Time Message Downloads the Hospitality logo T Hospitality logo file requirements ospi Ed 090 BMP or AVI files only e Max file size BMP 960 X 540 AVI 30MB The file can only be named samsung bmp or samsung avi Logo Display Time Set the logo display time 3 5 7 Seconds Clone TV to USB Clone the current TV option values to a USB memory device Clone USB to TV Clone the saved TV option values in a USB memory device to the TV Cloning When
46. ng any channels the channel list displays all of the available channels e My Channel works in Standalone mode only e SI Vendor in Standalone mode This does not work if Smoovie is selected e This is in the Hotel Options in Hotel Menu gt Service Mode and can be turned on or off e The option only works when it is set to On e Channel Composition Genre Mode Antenna Mode Activation ms Standard Category Ch Mode Air Cable Satellite Description All Default O O News O O Hotel Genre Radio O O Provide genre channel mode by each country that Entertainment O O master has managed in factory mode Sport O O Hotel O O 0 My Channel Current status Austria Sports 9 id Country Genre All Country All Austria News Belgium Dutch Radio Belgium French Entertainment Czech Sports 6 Hotel Germany Y Blue Keep Previous U D L R Move En Enter For the number of items to be displayed in the list refer to the design document Key Guide Button Action Nav Help BLUE Returns to the screen Genre setup Last Country amp Genre Keep Previous ENTER Selects an item Enter Ch Up Down Move the highlight by page No Guide UP DOWN Navigates the each country genre list in a circular manner kids RIGHT Selects the highlighted item and then move the highlight to Genre section RETURN Returns to the screen Genre setup Last Country amp Genre No Guide EXIT Returns to the screen Genre setup
47. ntries r 1 Yy I Country addition completed a Key Guide Button Action Nav Help ENTER Selects the highlighted item Enter RETURN Cancels and returns to the previous screen Tools Return UP DOWN Moves the highlight over country items Move LEFT RIGHT Moves the highlight Move INFO N R N R TOOLS Closes the current window and displays the Tools menu No Guide EXIT Cancels and returns to the previous step Factory Mode No Guide amp NOTE e This is the definition of Add to Countries e The highlighted channel or more than one selected channel is added to the Country category amp ETC e Timeout 60 sec Engish 47 Elements No Name Description e f there are no channels that have been registered to the country list in 4 Add to Countries the selected channels Add to Countries is displayed as the title Window e A check box is displayed depending on whether the country that was selected when entering the screen is registered or not 2 Guide e The number of the selected channel or the channel name The channel name is displayed when one channel has been 3 Selection Info selected Selected channel NNNN NNN ABC The number of selected channels is displayed when more than one channel has been selected Selected Channels N The message is displayed after the completion of the operation This i Complete Message message is always displayed if the OK butt
48. o the MediaHub MediaHub communicates with the TV by sending messages regarding Active Inactive sources The TV switches to the Active external source You have to connect the HDMI of the MediaHub to the HDMI IN 1 DVI port of the TV When the TV is on connect the TV and the RJP within 10 seconds Special features PIP Auto Detection Engish 15 Connecting the RJP Remote Jack Pack Output to any external source connected to RJP on the hotel desk RJP Rear USB HDMI VIDEO AUDIO AUDIOIPC TV Rear Panel 1 DVI 2 ARC HDMI IN 2 HDMI cable 4 D sub PC Audio cable Connect the PC IN PC DVI AUDIO IN port of the TV to the PC AUDIO port of the RJP Connect the HDMI IN 1 DVI 2 ARC port of the TV and the HDMI port of the RJP Connect the RJP port of the TV and the RS 232 port of the RJP amp The RJP Remote Jack Pack compatible with this Samsung TV is TeleAdapt TA 7610 TA 7650 HD and TA 7660 HD Plus RJP Remote Jack Pack RJP stands for Remote Jack Pack The RJP is a hardware module that has different Audio Video inputs A V Audio PC and HDMI and corresponding outputs The corresponding output sources are con nected from RJP to TV The RJP communicates with the TV via RS232 Hot Plug amp Play is a function that allows hotel guests to connect an external source to the RJP The RJP communicates with the TV by sending m
49. ome of the Channel menu functions on the user Channel menu such as Auto Tuning Antenna selection etc Channel Editor The Channel Editor lets you edit the channels stored in the TV s memory Using Channel Editor you can Change the channel numbers and names and sort the channels in your desired channel number order Apply the video mute to channels you select The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen The Channel Editor also lets you view information about each channel easily without your having to display each channel directly Mixed Channel Map ON This Feature enables showing browsing all antenna type Air Cable or Satellite channels at the same time ON When ON guests can access the complete Channel Map irrespective of the selected antenna type The Channel list will also populate Air as well Cable type channels OFF When OFF guest can access the Channel Map corresponding to the selected antenna type AIR CABLE or Satellite only The Channel list Editor will only show the selected antenna type channels Dynamic SI OFF ON Check the DTV Programme channel number the TV channel editor is inaccessible OFF Do not check the DTV Programme channel number the DTV channel editor is accessible but additional channel Programme number update is not supported Channel Rescan Message ON When there
50. on is selected e How to identify the meaning of multiple channel selection marks e When all of the items have been registered 5 Selection Mark e When only part of the items have been registered __e When none of the items have been registered Add to Countries Edit Countries 2 2 Edit Countries Select the country to odd or delete the selected chonnel to from Selected channel 1111 111 ABC Austria Belgium French m u D LU 8 Move Enjerter Re Retum e Channel Manager gt Browser gt Tools gt Add to Countries H 1 Y l Country editing completed Key Guide Button Action Nav Help ENTER Selects the highlighted item Enter RETURN Cancels and returns to the previous screen Tools Return UP DOWN Moves the highlight over country items Move LEFT RIGHT Moves the highlight Move INFO N R N R TOOLS Closes the current window and displays the Tools menu No Guide EXIT Cancels and returns to the previous step Factory Mode No Guide 48 Engish amp NOTE e This is the definition for Edit Countries e The highlighted channel item or more than one selected channel item is added or deleted from the Country category e Timeout 60 sec Elements No Name Description e If there is a registered channel among the selected channels Edit Coun tries is displayed as the title 1 Add t0 Countries e Acheck box is displayed depending on whether
51. ord failed appears if the copy operation was unsuccessful No USB appears if no USB device is connected No File appears if there is no file to copy on the USB device or or the file is in the wrong format must be a BMP file If No File appears and there is a logo file on the USB device check the file format e Logo File Format The TV supports only BMP and AVI format The file name must be samsung bmp or samsung avi The maximum resolution of the BMP format is 960 x 540 The maximum file size for AVI format is 30MB The TV does not change the size or scale of the image Engish 23 USB Cloning USB Cloning is used to download user configured settings Picture Sound Input Channel Setup and Hotel Setup from one TV set and upload them to other TV sets All the user defined settings from the TV Master Set can be copied to the USB device Cloning from TV to USB This copies stored data from the TV set to the USB device 1 Insert a USB drive into the USB port on the rear of the TV HOD 0A 2 Enter the Interactive menu by pressing buttons in order jonne e MUTE 1 1 9 ENTER 3 Press the A or V button to select Clone TV to USB then press the ENTER button 4 When the message Clone TV to USB is displayed press the ENTER button v 5 You can verify USB cloning behavior ESS e n Progress during copying data to USB Setting Auto Initialize OFF Completed copy was finis
52. orted countries 20 countries Austria Belgium China Denmark Finland France Germany Greece Italy Japan Netherlands Norway Portugal Russia Korea Spain Sweden Turkey USA e f more than one channel is set to a country the country is registered as a category and users can view the channels by country More than one country can be set to a channel If the user selects a category only the channels corresponding to the country are displayed in the channel list e f any channel for which the country is set is selected from the channel list the Edit Countries item is added to the Tools Otherwise the Add to Countries item is added to the Tools If the corresponding function is executed a country for the selected channel can be set or canceled e Front Ul e Provides the screen where the user can select a country or genre when the user turns the power on Left Frame Layout Channel Manager Registered Belgium Dutch Ch Nome mi 1 Belgium French Ch Name I mm 18 20 Ch Name 22 AJ Ch Name Al 24 Ch Name oos Re Retum Key Guide ENTER Selects or enters the corresponding Channel Browser area No Guide RETURN Selects or enters the corresponding Channel Browser area Return S NOTE e This is a component of the Left Frame Country Categories amp ETC e Default Highlight The currently selected country English 41 Elements
53. ose After connecting a computer to the TV set the screen resolution for the TV on the computer The optimal resolution is 1920 x 1080 60 Hz If it is set to any other than in the table below the TV may display nothing Set the resolution properly referring to the user guide of the computer or its graphic card The resolutions in the table are recommended 8 English amp Optimal resolution is 1920 X 1080 60 Hz Mode Resolution Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity KHz Hz MHz H V IBM 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 1152 x 870 68 681 75 062 100 000 640 x 480 31 469 59 940 25 175 640 x 480 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 1024 x 768 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 1152 x 864 67 500 75 000 108 000 VESA DMT 1280 x 1024 63 981 60 020 108 000 1280 x 1024 79 976 75 025 135 000 1280 x 720 45 000 60 000 74 250 1280 x 800 49 702 59 810 83 500 1280 x 960 60 000 60 000 108 000 1366 x 768 47 712 60 015 85 500 1440 x 900 55 935 59 887 106 500 1600 x 900RB 60 000 60 000 108 000 1680 x 1050 65 290 59 954 146 250 1920 x 1080 67 500 60 000 148 500
54. other countries DI vx DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 Open Source License Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source Licence Notice is written only English 62 Engish Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre Zi Web Site SINGAPORE 1800 SAMSUNG 726
55. ourites 1 5 Shows all favourite channels SI amp If you want to view added favourite channels press the CH LIST button and use the 4p Ch Mode button to move between Favourites 1 5 Using the control buttons with the Channel List e 4 Tools Displays the option menu e 4b Ch Mode Channel Move to the All TV Radio Data Other Analogue or Favourites 1 5 e When you select the Programme View in 1 Tools menu you can move to other channels using 4 gt Chan nel button 4 Watch Information Watches the channel you selected Displays details of the selected programme e S Page Move to the next or previous page Engish 31 How to use Schedule Viewing in Channel List digital channels only When you set the Schedule Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desired digital channel 2 Press the TOOLS button and then select Programme View The programme list for that channel appears 3 Press the A V buttons to select the desired programme then press the ENTERCS Information or INFO button 4 Select Schedule Viewing then press the ENTERCS button when done If you want to cancel Schedule Viewing follow steps 1 through 3 Select Cancel schedule Using Option Menu Set each channel using the Channel List menu options Programme View Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Informa
56. pending on the model E Security mode Design Specifications This is to restrict some functions such as TTX and external source HDMI USB input in specific facilities such as a correctional facility The Security menu is password protected Access to the Security menu is denied without the password Security Setting The Security Setting can be set to ONor OFF The default is OFF Security Setting If set to On external source HDMI USB input and the TTX function will be disabled Password Setting This allows users to change the password Users must input the current password a new password and confirmation of the new password Password Reset This is to reset the password The default password is 00000000 Password Reset is visible only in the Factory menu by using the key combination of Info and Factory It is not visible using the key combination of MUTE 1 1 9 ENTER Security Setting If set to On the SIRCH function is not available Factory Reset will not reset the Security Setting Engish 55 Installing the Wall Mount The wall mount kit sold separately allows you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount Contact a technician for assistance when installing the wall mount bracket We do not advise you to do it yourself Samsung Electronics is not responsible for any damage to the produc
57. s No Channel Manager Austria The Current list is empty T Tools Re Retum Description Description The message is displayed when the currently selected country does not contain any items Main Frame Channel Browser Channel Manager Registered Selected items 2 44 Engish CH UP DOWN Page En Select Took Re Ch Name Ch Name Cx 3 Ch Name 4 Ch Name 6 7 Ch Name 5 8 HDMI 1 e s 9 HDMI 2 5 10 HDMI 3 p 11 Ch Name x 9 12 Ch Name p 13 Ch Name m 14 Ch Name QI Ge 15 Ch Name I Ss 16 Ch Name I 17 Ch Name Ch Name I Es 19 Ch Name Press the TOOLS button after a 2i Ch Name selecting items Ch Name Retum Key Guide Button Action Nav Help CH UP DOWN Moves the page Page ENTER Selects or enters the corresponding Channel Browser area Select RETURN Returns to the previous step Factory Mode Return UP DOWN Moves the highlight up or down No Guide RIGHT Moves the highlight to the Channel Browser area No Guide INFO Shows the Category Info No Guide TOOLS Shows the utility function menus Tools EXIT Cancels and returns to the previous step Factory Mode No Guide NOTE This is a component of the Main Frame Channel Browser Theinitial highlight is on the channel before entering Factory Mode or the external input Elements No Name Description 1 Main Frame e S
58. s ID To reset the ID code press the MUTE button and the EXIT button simultaneously for more than 7 seconds When you stop pressing the buttons the ID code for both the TV and Remote are reset to O Remote control code is set to 0 appears 28 English El CH Bank Editor Smoovie TV Only Channel Bank Editor edits channels with 3 different Bank Options Depending on the Bank card there are specific channels Hotel customers can enjoy Setting the CH Bank Editor under Stand alone Mode 1 Enter the Hotel Standalone menu by MUTE 1 1 9 Enter 2 Please select SI vendor Smoovie 3 find the new menu option Channel Bank Editor 4 Enter the Channel Bank Editor Hospitality Mode Standalone REACH Sever s v v v Depending on model and region some menu items may not exist 5 Edit the channel bank like below example a BANK Free channel Select the channel that will be used when remote doesn t have any card b BANK Family Card Green Select the channel that will be used when remote has a GREEN CARD c BANKS Adult Card Red Select the channel that will be used when remote has a RED CARD Channel Bank Edit Registered Bank1 4 Bank2 6 Banks 36 o T a a Kg ex Es BBC World Kl c5 Kl Coming Soom 2 2 m m m o m m E E G Select Deselect 9 Return References of using SMOOVIE Remote Controller 1 If you select SMOOVIE as the SI vendor you
59. sh Default Highlight All Mode Change Interaction 1 1 2 This page is only to indicate possible interactions It may not be exactly identical to actual screens My Channel My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre A A All Country All DOWN All Country All Austria News Austria News Belgium Dutch Radio Belgium Dutch Radio Belgium French Entertainment Belgium French Entertainment Czech Sports LEFT Czech Sports France Hotel France Hotel Germany Germany v v Navigation Help Area Navigation Help Area Current Genre Mode All Country Sports ENTER RIGHT My Channel My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre A A All Country All UP All Country All Austria News Austria News lt lt Belgium Dutch Radio Belgium Dutch Radio ENTER Belgium French Entertainment _ Belgium French Entertainment Czech Sports Czech Sports France due ae France sie Germany Germany v v Navigation Help Area Navigation Help Area ENTER RIGHT O If the count automatical ly ry is selected highlight moves to genre menu Engish 37 Mode Change Interaction 1 2 2 e This page is only to indicate possible interactions It may not be exactly identical to actual s
60. should use the SMOOVIE Remote Controller 2 With the Numeric keys of the remote controller users can select only the Bank1 channel To change the channel using the Green or Red Card please use channel up down keys 3 For the Channel guide or the Channel list users can see only Bank1 channel list English 29 il Channel Editor Channel Editor edits channel number a and name Use Channel Editor to sort the channels as user desired channel numbers Hospitality Mode Standalone Network Si Vendor OFF Widget Solution Power On System Depending on model and region some menu items may not exist Simple Steps for channel Editor under Stand alone Mode Step Broad Outline Operate Channel Auto Store in Hotel Option Menu Enter Channel Editor in Hotel Option Menu Compile a table related to the final channel lists you want to have Rearrange channels with the TOOLS Button based on the table you compiled Press the EXIT or RETURN Button to exit please refer to the following details ao B DIN Smoovie On sequence Smovie TV used Air Cable Step Mixed Channel Map On Air and Cable both used Only Air or Cable used Only Air or Cable used If the tv starts with Hotel P amp P If P amp P already done If the tv starts with Hotel P amp P If P amp P already done Do the P amp P except channel Do the P amp P all Air or Cable 1 store Enter Hotel menu auto tune Enter Hotel menu Select ch
61. specifications OFF When the Subtitle Auto On function is OFF it does not follow France s subtitle specifications tht x m OFF Widen the subtitle section to fit the screen width Picture Menu Lock OFF Enable or disable the Picture Menu ON Main Menu display Menu Display ON OFF Main Menu No display Tools Display ON Hide or show the Tools menu channel Meny OFF Hide or show the Channel menu Display Turning the front panel local key operations on off Unlock Unlocks all panel keys Panel Button Lock Unlock e Lock Locks all panel keys Menu OSD OnlyPower Locks all panel keys except the Power panel key Menu Source Locks the Menu and Source panel keys Home Menu ON OFF The Home Menu is not displayed Display ON The Home Menu is displayed Home Menu Editor Edit Home Menu Home Menu Auto ON ON The Home Menu is Auto Start Start OFF The Home Menu is not Auto Start ua OFF Enable or disable the Bluetooth Music Player OFF No clock option of Factory menu shall work Only Main menu Glock Type OFF law Clock SW clock shall work only Select the method to update the clock data Local Time Manual Manual Use clock data from DVB channel or manual clock setting When the TV is in the Clock stand alone mode Time Channel Use clock data from the selected Channel type and Channel num Enable or disable the alarm function Timer Type Timer Type e WakeUp Enable the alarm function to turn on the device at the sp
62. t in fire or a problem with the product due to an increase in the internal temperature When using a stand or wall mount use parts provided by Samsung Electronics only e Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling The appearance may differ depending on the product Installation with a stand Installation with a wall mount 10 cm 10 cm 10 cm 10 cm Contents 4 m s Installing ihe LED ro M 3 e Viewing the Connection Panel 5 LM Leoni PE e VIEWING the Remote COMO s cocco rto nes RAE XR epe tua BAGAN AN KAB PARAR NER AGA Connecting the TN AEn etm 13 e Connecting the Bathroom Speak S scorta recrute pend NANANA RN EXER ERRAT p pA a Foe state 14 Connecting the MediaHub AD AA Aa AN a 15 Connecting the RJP Remote Jack PACK Laan aaa AA PAANAN AA iL denne ba Renner BAKLA 16 e Seting the Hotel OPIONDAd rs E 18 e Installing the Wall MOUDE 2 occ ci KANA semer ANGKAN AA isa ee lee e Securing the TV One Wallis M e Anti theft Kensington Lock SDSCIICALOMS e Em 9 DIMENSIONS aamin BATAN hase AAP NAGA a ex pie sh usse a i teense uM npe Raea d 2 ICENCO Eng
63. t or injury to yourself or others if you select to install the TV on your own Wall Mount Kit Specifications VESA S The Wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installing on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE e Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided e Do not use screws that do not comply with VESA standard screw specifications Do not use screws longer than the standard dimensions as they may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on their specifications Do not fasten the screws too tightly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions e Do not exceed a 15 degrees tilt when mounting this TV inches VESA Spec A B Standard Screw Quantity 32 40 200 X 200 M8 4
64. the wall are equal to or lower than the clamps fixed on the TV Untie the string before moving the TV 4 Verify that all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically P ng fix the system when using it in a public place The appearance and locking Pad R by 0 method may differ from the illustration depending on the manufacturer Refer to z NG o the manual provided with the Kensington Lock for additional information on proper Was S use R H To lock the product follow these steps CI 9 P Please find the fa icon on the rear of the TV A kensington slot is beside the As ri Bn lt Optonal gt 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately The location of the Kensington Lock may be different depending on the model Engish 57 Specifications Display Resolution
65. tion Sort Edit Mode Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings Programme View Displays the programme when a digital channel is selected e Edit Favourites Set channels you watch frequently as favourites Add or delete the selected channel in Favourites 1 5 1 Select the Edit Favourites then press the ENTERCS button 2 Press the ENTERC button to select Favourites 1 5 then press the OK button S One favourite channel can be added to several favourites among Favourites 1 5 e Lock Unlock Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set to On S The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option Edit Channel Name analogue channels only Assign your own channel name Edit Channel Number digital channels only Edit the number by pressing the number buttons Some areas may not be able to support Edit Channel Name and Edit Channel Number Delete You can delete a channel to display the channels you want Information Displays details of the selected programme Sort Changes the list ordered by channel number or channel name Edit Mode Select desired channels and edit them Using Option Menu Set each channel using the menu options Edit Favourites Lock Unlock Delete Deselect Select A
66. vices to additional modules to improve device use and convenience HDMI IN 1 DVI 2 ARC Connects to the HDMI jack of a device with an HDMI output amp No sound connection is needed for an HDMI HDMI connection HDMI connections carry both audio and video amp Use the HDMI IN 1 DVI jack for a DVI connection to an external device Use a DVI to HDMI cable or DVI HDMI adapter DVI to HDMI for the video connection and the PC DVI AUDIO IN jacks for audio Q DATA Used to support data communication between the TV and the SBB Connects using RJ 12 TV type plugs ANT IN To view television channels correctly the TV must receive a signal from one of the following sources An outdoor antenna A cable television system Q HEADPHONE JACK Headphones may be connected to the headphone jack on your TV While the headphones are connected the sound from the built in speakers is disabled HP ID Connect the cable to HP ID and Headphone Jack simultaneously and connect it to separated Headphone Box See page 15 When connecting Headphone to Headphone Box it works same as Headphone function Q PC DVI AUDIO IN Connects to the audio input jacks on an Amplifier Home Theater Q PC IN Connect to the video output jack on your computer LAN Connect to a wired LAN using CAT 7 cable Display Modes You can also select one of the standard resolutions listed in the Resolution column The TV will automatically adjust to the resolution you cho
67. y not be exactly identical to actual screens NOTE e Users can navigate the items in each country amp genre list by pressing the up or down remote control keys Circular navigation is supported 0 My Channel My Channel Current status All Country Sports Current status All Country Sports Country Genre DOWN x4 Country Genre A A All Country Al ma All Country All Austria News Austria News Belgium Dutch Radio Belgium Dutch Radio Belgium French Entertainment Belgium French Entertainment Czech Sports e Czech Sports France Hotel UP x 4 France Hotel Germany Germany vi v UP x 4 DOWN x 4 My Channel Current status All Country Sports Country Genre A All Country All Austria News Belgium Dutch Radio Belgium French Entertainment Czech Sports France Hotel Germany v DOWN UP UP DOWN My Channel Current status All Country Sports gemi Genre A s LA mug All Belgium Dutch News Belgium French Radio Czech Entertainment France Sports Germany Hotel Hungary v UP xN DOWN x N END My Channel Current status All Country Sports Current status All Country Sports Country Genre Country Genre A A Slovakia All Slovakia All Spain News Spain News Switzerland Radio Switzerland Radio United Kingdom Entertainment United Kingdom Entertainment Eastern Europe
68. y using the navigation colour amp enter key on the Remote in the Edit Welcome Message OSD Edit Welcome Message A Move to left B Move to Right C Leave Black D bone lt Move Enter 9 Return The Welcome message and hotel logo cannot both be active at the same time 22 English Hotel Logo The Hospitality Logo function displays the Hotel s picture image when the TV is initially powered on Hospitality Logo settings are the Hospitality mode menus The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on If there is a logo image stored in memory and the Hospitality Logo option is on the Hospitality logo is displayed when the TV is turned on The Hospitality logo is not displayed when the Hospitality found Logo option is off even if the logo image has been loaded into the TV Welcome Message Edit Welcome Message Hospitality Logo DL Logo Display Time e Hospitality Logo e Hos This option lets you choose whether the Hospitality Logo image is displayed or not Initial value is OFF Can be set to OFF or ON When set to ON the Logo Download and Logo Time Display menu items become accessible pitality Logo DL This option lets you download the logo image to the TV s memory from a USB device A wait message appears while the image is being copied to the TV A completed message appears when the copy operation finishes successfully The w

Samsung HG32AD590HW User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents