Samsung CH24CA User Manual
Contents
1. When you need to dispose of the unit consult your dealer If pipes are removed incorrectly refrigerant may blow out and come into contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments Please recycle or dispose of the packaging material for this product in an environmentally responsible manner OTHERS Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency Contents PREPARING YOUR AIR CONDITIONER m Safety Precautions 2 mViewoftheUnit 4 Wired Remote Controller Buttons and Display 6 Wireless Remote Controller Buttons and Display 7 m Centralized Controller 8 m The Indicators on the Unit For Wireless Remote Controller Only 9 m Getting Start knk Reel ak Dea ba eel aa 10 m Inserting the Wireless Remote Controller Batteries 11 USING WIRED REMOTE CONTROLLER OPERATING YOUR AIR CONDITIONER Selecting the Automatic Operating Mode 132. mCoolingYourRoom 14 mHeatingYourRoom 15 m Removing Excess Humidity 16 m Airing Your 17 m Adjusting the Air Flow Direction 17 PROGRAMMING YOUR AIR CONDITIONER mSetingiheOnlimer 18 mSetingiheOfflimer 19 USING WIRELESS REMOTE CONTROLLER OPERATING YOUR AIR CONDITIONER m Selecting the Automatic Operating 21 mCoolingYourRoom 22 mHeatingYourRoom 23 m Removing Excess Humidity 24 mAiring Your ROOM 25 m Adjusting the Air Flow Direction 25 PROGRAMMING YOUR AIR CONDITIONER mSetingiheOnlimer 26 mSetingiheOfflimer 27 Usine CENTRALIZED CONTROLLER m Using the Centralized Controller 28 RECOMMENDATIONS FOR USE Operating Recommendations 29 m Cleaning Your Air Conditioner 30 Bio Pure Filter Installation Optional 31 Temperature and Humidity Ranges 32 m Solving Common Problems 33 TECHNICAL SPECIFICATIONS Correct Dispo
3. 5 Bio Pure Filter Installation Optional ENGLISH The air conditioner can be fitted with a Bio Pure filter to remove minute dust particles The service life of the filter is approximately three months depend ing on the time during which the air conditioner is used 1 Remove the vinyl packing from the filter Note Do remove the packing from bio pure filter until you wish to use the filter as it will lose its properties 2 Open the front grille by pulling the tabs on the grille 3 Remove the front grille 3 1 Remove the safety clips 3 2 Open the front grille about 45 and pull it forward 4 Pull out the air filter 5 Locate the bio pure filter on the center of air filter 6 Secure the bio pure filter with four screws 7 Reinstall the air filter the front grille and the safety clips Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used If the air conditioner is used at Then High temperature The automatic protection feature may be triggered and the air conditioner stopped Low temperature A water leakage or some other malfunction may happen if the heat exchanger freezes High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for a long periods Mode Outdoor Temp
4. Cassette type Air Conditioner Cool and Heat OWNER S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER CUSO MANUAL DE INSTRU OES MANUEL D UTILISATION GEBRAUCHSANWEISUNG 2 Indoor unit Outdoor unit ACH1800E ICH1800E UBH1800E ACH2400E ICH2400E UBH2400E ACH3600G ICH3600G UCH3600G ACH4400G ICH4400G UCH4400G CH18ZA CH18ZA CH18ZAX CH24ZA CH24ZA CH24ZAX CH36ZA CH36ZA CH36ZAX CH44ZA CH44ZA CH44ZAX CH18CA CH18CA CH18CAX CH24CA CH24CA CH24CAX CH36CA CH36CA CH36CAX CH44CA CH44CA CH44CAX Aire acondicionador Tipo Casete Refrigeraci n y Calefacci n Condizionatore d aria Tipo Cassetta Raffreddamento e Riscaldamento Ar Condicionado Tipo Cassete Refrigera o e Aquecimento Climatiseur de type Cassette Refroidissement et Chauffage Tonbandkassette Klimaanlage K hlen und W rmen KAIMATIOTIKO 0898 041504 2 ENGLISH ESPANOL e lt RUSSIAN DEUTSCH 5 PORTUGU S Register your product at www samsung com global register Safety Precautions The following safety precautions must be taken when using your air conditioner WARNING Risk of electric shock Can cause injury or death Disconnect all remote elect
5. Cooling Your Room You must select the COOL mode if you wish to adjust the Cooling temperature Fan speed when cooling 1 If necessary press ON OFF button Result The On Off indicator on the wired remote controller comes on The air conditioner runs in the mode selected when the unit was last used The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes em 2 To select the COOL mode press the Mode button until is displayed at the top of the wired remote controller Result The air conditioner runs in COOL mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons one or more times until the required temperature is displayed Possible temperatures are between 18 and 30 inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The air conditioner starts cooling provided that the room temperature is higher than the selected temperature the fan will however operate 4 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed ayy Automatic rotated 4 gt Jay Low a a Medium Sail High 5 To control the direction of the air flow refe
6. F button This chapter indicates how to operate and program your air conditioner with the wireless remote controller The wireless remote controller is an optional accessory Selecting the Automatic Operation Mode In the Automatic mode the room temperature and the fan speed are controlled automatically 1 If necessary press button Result The On Off indicator on the unit comes on 4 The air conditioner runs in the mode selected when the unit was last Used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the AUTO mode press the Mode button until a is displayed at the top of the wireless remote controller Result The indoor unit beeps The air conditioner runs in AUTO mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The air conditioner takes the present temperature of the room every 30 minutes If the temperature is higher than the selected temperature a the air cond
7. H36CAX 44CAX Air inlet Rear Air outlet Connection valve Wired Remote Controller Buttons and Display The wired remote controller is an optional accessory The wired remote controller is installed on the wall Operating mode Removing frost indicator Centralized controller indicator In case of installing the Centralized controller Communication error indicator 3 OR GTG EX CENTRALIZED 22 S Temperature setting On Timer setting ER 7 Fan speed N OFF H TEST FILTER SIGN Off Timer setting Air flow direction Test indicator Filter Sign indicator l l On Off amp Timer Set Cancel button Temperature adjustment buttons On Timer button On Off indicator Fan speed adjust ment button Off Timer button Swing button Test button Filter Reset button Mode selection button Note Test button is for your installation specialist You must NOT press it After cleaning the air filter press the filter reset button Then the wired remote controller will display the FILTER SIGN indicator when the time to clean the air filter refer to page 30 Wireless Remote Controller Buttons and Display The wireless remote controller is an optional accessory ENGLISH Mode selection button Operating mode Temperature adjustment buttons Temperature setting Filter Reset button Fan speed Fan spe
8. On Timer button until 2 0 Hr is displayed 2 Press the Set Cancel button 3 Press the Off Timer button until 4 0 Hr is displayed 68 4 Press the Set Cancel button Nets Yon can see change the setting mode and or the temperature by pressing the Mode button or the Temperature buttons after setting the Off timer Set lt E To Cancel the Off Timer 1 To cancel the Off Timer press the Off Timer button or more times until the timer setting disappears 2 Press the Set Cancel button On Timer E qiy Note Ifyou want to turn off the air conditioner before the timer reaches the setting time press the ON OFF button D Using the Centralized Controller The centralized controller is an optional accessory Up to sixteen air conditioners can be tumed on or off by connecting to the centralized controller However you cannot adjust the cooling heating tem perature or set the timer with it If you also have the wired remote controller CENTRALIZED CONTROL is displayed at the top of the remote controller 1 To turn on the all of air conditioners connected to the centralized controller AN press the All ON button O 2 To turn on off a specific air conditioner press the ON OFF button Result 4 The On Off indicator comes on when the air conditioner is operating 3 To turn off the all of air conditioners connected to the centralized controller p
9. STE AIRE ACONDICIONADO HA SIDO FABRICADO POR QUESTO CONDIZIONATORE D ARIA E PRODOTTO DA ESTE APARELHO DE AR CONDICIONADO E FABRICADO POR CE CLIM ATISEUR EST FABRIQUE PAR DIESE KLIM AANLAGE IST FABRIZIERT VON 2Y2KEYH 2 2 P ELECTRONICS
10. air conditioner starts cooling provided that the room temperature is higher than the selected temperature the fan will however operate 4 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed anf Automatic rotated Ta Low Jo Medium Sal High 5 control the direction of the air flow refer to page 25 Heating Your Room You must select the HEAT mode if you wish to adjust the Heating temperature Fan speed when heating 1 If necessary press ON OFF button Result The On Off indicator on the unit comes on 4 The air conditioner runs in the mode selected when the unit was last Used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the HEAT mode press the Mode button until is displayed at the top of the wireless remote controller Result The indoor unit beeps The air conditioner runs in HEAT mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons or more times until the required temperature is displayed Possible temperatures are between 16 and 30 inclusive Result Each time you press Tem
11. d remote controller buttons and display Wireless remote controller buttons and display Centralized controller The indicators on the unit For wireless remote controller only Inthe main part of the document you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN Inserting the Wireless Remote Controller Batteries ENGLISH You must insert or replace the remote controller batteries when You purchase the air conditioner The remote controller does not work correctly Note Use two AAA LR03 1 5V batteries Do not use old batteries or different kinds of batteries together Batteries may be completely discharged after 12 months even if they have not actually been used 1 Push the battery cover on the rear of the remote controller with your thumb in the direction of the arrow and remove it 2 Insert the two batteries taking to respect the polarities on the battery with on the remote controller on the battery with on the remote controller 3 Close the cover by sliding it back until it clicks into place Using Wira Renous Controllar This chapter indicates how to operate and program your air conditioner with the wired remote controller The wired remote controller is an optional accessory Selecting the Automatic Operating Mode In the Automatic mode the
12. e 17 ENGLISH Removing Excess Humidity If the atmosphere in your room is very humid or damp you can remove excess humidity without lowering the room temperature too much 1 If necessary press ON OFF button Result The On Off indicator on the wired remote controller comes on 4 The air conditioner runs in the mode selected when the unit was last used PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the DRY mode press the Mode button until CF is displayed at the top of the wired remote controller Result The air conditioner runs in DRY mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The air conditioner starts removing the excess humidity The quantity of air is adjusted automatically Nowe Inthe dry mode the fan speed is controlled automatically 4 control the direction of the air flow refer to page 17 Airing Your Room If the atmosphere in your room is stale you can air it using the FAN featu
13. ed adjustment ae button Air flow direction Swing button On Timer setting On Timer button Off Timer setting Off Timer button Battery discharge indicator On Off amp Timer Set Cancel button Note After cleaning the air filter press the filter reset button Centralized Controller The centralized controller is an optional accessory The centralized controller is installed on the wall Operating lamp All On button All AllO All Off button On Off indicators On Off buttons iada Note Operating lamp comes on when at least one air conditioner connected to the centralized controller is operating The Indicators on the Unit For Wireless Remote Controller Only The receiver amp display unit is an optional accessory for the wireless remote controller ENGLISH Timer gt gt O On Off button Remotecontrolsensor__ T C On Off indicator Filter Sign _ Removing frost indicator indicator Getting Start You have just purchased a cassette type air conditioner and it has been installed by your installation specialist Your Owner s Instructions contain much valuable information on using your air conditioner Please take the time to read them as they will help you take full advantage of the unit s features The booklet is organized as follows The following figures are shown on pages from 410 9 Indoor and outdoor units Wire
14. en up and down The indoor unit beeps When the air conditioner is first turned on the blades are moved 2 To stop the blades press the Swing button again To set to the required position press the Swing button again When the blades are in the required position Note You also adjust by the hands the blades which are not operated by the swing button PARO ENGLISH Q 3 seth Q E o 3 lz Setting the On Timer 5 N 2 The On Timer enables you to switch on the air conditioner automatically after a given period of time You can set the period of time from 30 minutes to 24 hours 1 To set the operating time press the On Timer button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hour inclusive Result Each time you press On Timer button The time is adjusted by 0 5 hour to 5 hours by 1 hour from 6 hours to 24 hours 2 Press the Set Cancel button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature disappear on the display after 5 seconds The air conditioner will switch on automatically when the counter displayed on the remote controller reaches the setting time as disappearing the On timer setting Note Yon can see or change
15. erature Indoor Temperature Indoor Humidity Heating 5 C 21 approx 15 C to 27 approx Cooling 5 C to 43 approx 21 to 32 C approx 80 or less Drying 21 to 43 C approx 21 to 32 approx If the heating operation is used at below 0 C outdoor temperature then does not a full capacity If the cooling operation is used at over 33 C indoor temperature then does not a full capacity Solving Common Problems Before contacting the after sales service perform the following simple checks They may save your time and expense of an unnecessary call Problem Explanation Solution The air conditioner does not Check that the breaker used for the air conditioner is switched on operate at all Wired Remote Controller The air conditioner does is displayed on the wired remote controller In this case operate with the remote turn the air conditioner off and contact your dealer controller Wired Remote Controller When turning on off the In case of using the wired remote controller for a group the air air conditioner it is not conditioners connected to the remote controller are turned on off in turned on off immediately order Thus it takes some time up to 32 seconds Wireless Remote Controller The air conditioner does not Check that there are no obstacles between you and the remote operate with the remote control sensor controller Check the wireless remote controller batter
16. g time press the On Timer button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hours inclusive Result Each time you press On Timer button The time is adjusted by 0 5 hour to 5 hours by 1 hour from 6 hours to 24 hours 2 Press the Set Cancel button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature disappear on the display after 5 seconds The air conditioner will switch on automatically when the counter displayed on the remote controller reaches the set ting time as disappearing the On timer setting Note Yon see or change the setting mode and or the temperature by pressing the Mode button or the Temperature buttons after setting the On timer To Cancel the On Timer 1 To cancel the On Timer press the On Timer button one or more times until the On timer setting disappears 2 Press the Set Cancel button Note Ifyou want to turn on the air conditioner before the timer reaches the setting time press the ON OFF button Setting the Off Timer ENGLISH The Off Timer enables you to switch off the air conditioner automatically after a given period of time You can set the period of time from 30 minutes to 24 hours 1 To set the operating time press the Off Timer button one or mo
17. he required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts removing the excess humidity The quantity of air is adjusted automatically Note Inthe dry mode the fan speed is controlled automatically 4 control the direction of the air flow refer to page 25 Airing Your Room If the atmosphere in your room is stale you can air it using the FAN feature 1 If necessary press 00 ON OFF button Result The On Off indicator the unit comes on 4 The air conditioner runs in the mode selected when the unit was last used The indoor unit beeps 2 To select the FAN mode press the Mode button until x is displayed at the top of the wired remote controller Result The indoor unit beeps 4 The air conditioner runs in FAN mode Nota You can change modes at any time 3 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed Low sa Medium 4 control the direction of the air flow refer to below Depending on the position of the indoor unit you can adjust the posi tion of the air flow blades thus increasing the efficiency of the air con ditioner 1 Press the Swing button Result o The blades are moving betwe
18. ies Refer to page 11 Check that you are close enough to the remote control sensor seven metres yards or less Wireless Remote Controller No beep is heard when you Check that you are pointing the remote controller at the remote press ON OFF on the control sensor of the receiver amp display unit remote controller Replace the remote controller batteries if necessary If there is a strong light around the air conditioner a three wavelength light a neon sign ect for example the air conditioner may not be operated with a remote controller If this happens use the remote controller close by the remote control sensor The air conditioner does Check that the correct operating mode has been selected not cool or heat The room temperature may be too low or too high Dust may be blocking the air filter guard refer to page 30 for cleaning instructions Check that there is no obstacle in front of the outdoor unit When heating the required Check that the required temperature has been set correctly room temperature is never Increase the fan speed reached and the air conditioner frequently stops ENGLISH Technical Specifications Package Weight Model Power Supply Paper Plastic Wood ACH 1800E ACH 2400E CH18ZA CH24ZA 1 220 240V 50Hz CH18CA CH24CA ACH 3600G ACH 4400G CH36ZA CH44ZA CH36CA CH44CA 30 380 415V 50Hz MEMO THIS AIR CONDITIONER IS MANUFACTURED BY E
19. itioner will start cooling If the temperature is lower than the selected temperature o the air conditioner will start heating Note ais a preset temperature for the most comfortable environment It can be adjusted by your installation specialist when installing the product ENGLISH Cooling Your Room ries You must select the COOL mode if you wish to adjust the Cooling temperature Fan speed when cooling 1 If necessary press CR ON OFF button Result The On Off indicator on the unit comes on 4 The air conditioner runs in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the COOL mode press the Mode button until is displayed at the top of the wireless remote controller Result The indoor unit beeps The air conditioner runs in COOL mode Note You can change modes at any time 3 adjust the temperature press the Temperature buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The indoor unit beeps The
20. perature buttons The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts heating provided that the room temperature is lower than the selected temperature the fan will however operate 4 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed sap Automatic rotated 4 Low a Medium ull 5 control the direction of the air flow refer to 25 ENGLISH Removing Excess Humidity If the atmosphere in your room is very humid or damp you can remove excess humidity without lowering the room temperature too much 1 If necessary press ON OFF button Result The On Off indicator on the unit comes on The air conditioner runs in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the DRY mode press the Mode button until is displayed at the top of the wireless remote controller Result indoor unit beeps The air conditioner runs in DRY mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons one or more times until t
21. r to page 17 Heating Your Room You must select the HEAT mode if you wish to adjust the Heating temperature Fan speed when heating 1 If necessary press ON OFF button Result The On Off indicator on the wired remote controller comes on 4 The air conditioner runs in the mode selected when the unit was last used PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the HEAT mode press the Mode button until is displayed at the top of the wired remote controller Result The air conditioner runs in HEAT mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons or more times until the reguired temperature is displayed Possible temperatures are between 16 and 30 inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The air conditioner starts heating provided that the room temperature is lower than the selected temperature the fan will however operate 4 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed a Automatic rotated 5 gt su Say Low Sl Medium Sail High 5 To control the direction of the air flow refer to pag
22. re 1 If necessary press 0 ON OFF button Result The On Off indicator on the wired remote controller comes on The air conditioner runs in the mode selected when the unit was last used 2 select the FAN mode press the Mode button until oh is displayed at the top of the wired remote controller Result The air conditioner runs in FAN mode 3 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed Low sa Medium High 4 To control the direction of the air flow refer to below Adjusting the Air Flow Direction Depending on the position of the indoor unit you can adjust the posi tion of the air flow blades thus increasing the efficiency of the air con ditioner 1 Press the Swing button Result The blades are moving between up and down PORTANT When the air conditioner is first turned on the blades are moved 2 To stop the blades press the Swing button again To set to the required position press the Swing button again When the blades are in the required position Note You can also adjust by the hands the blades which not operated by the Swing button ENGLISH Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time You can set the period of time from 30 min utes to 24 hours 1 To set the operatin
23. re times until the required time is displayed Possible time is between 0 5 hour and 24 hour inclusive Result Each time you press Off Timer button The time is adjusted by 0 5 hour to 5 hours by 1 hour from 6 hours to 24 hours 2 Press the Set Cancel button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature disappear on the display after 5 seconds The air conditioner will switch off automatically when the counter displayed on the remote controller reaches the set ting time as disappearing the Off timer setting If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours 1 Press the On Timer button until 2 0 Hr is displayed 2 Press the Set Cancel button 3 Press the Off Timer button until 4 0 Hr is displayed 4 Press the Set Cancel button Note You can see or change the setting mode and or the temperature by pressing the Mode button or the Temperature buttons after setting the Off timer To Cancel the Off Timer 1 To cancel the Off Timer press the Off Timer button one or more times until the timer setting disappears 2 Press the button Nota Ifyou want to turn off the air conditioner before the timer reaches the setting time press the ON OF
24. ress the All OFF button Operating Recommendations ENGLISH Here are a few recommendations that you should follow when operating your air conditioner Topic Recommendation Heating The heat pump function of the air conditioner absorbs heat performances from outside air and brings it indoors As the temperature of the outside air drops the heating performance of air conditioner will decrease If you find that the room is not warm enough using an additional heating appliance is recommended Frost When outside temperature is low but humidity is high frost may form on the outdoor unit at HEAT mode If this happens The heating operation stops The defrost mode will be triggered automatically for about ten minutes No intervention is required after about ten minutes the air conditioner operates again normally High indoor If both indoor and outdoor temperatures are high and the air and outdoor conditioner is running at HEAT mode the outdoor unit s fan temperatures compressor may stop at times This is normal simply wait until the air conditioner switches on again Power failure If a power failure occurs while the air conditioner is operating the unit will be switched off When the power returns the air conditioner restarts in the previous operation mode Cleaning Your Air Conditioner To get the best possible use out of your air conditioner you must clean D OD it regularly to remo
25. ric power supplies before servicing installing or cleaning This must be done by the manufacturer its service agent or a similar qualified person in order to avoid a hazard DURING OPERATION Users of this product are cautioned not to attempt repair of this product e ert at their own discretion Instead they are requested to directly contact a designated service center or the outlet at which the product was purchased Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury Keep children away from the unit Do not place any obstacles in front of the unit Do not spray liquid of any kind into the indoor unit Should this happen switch off the breaker used for your air conditioner and contact your installation specialist Make sure that the unit is correctly ventilated at all times Do not place clothing or other materials over it Ifthe wireless remote control will not be used for a long time remove the batteries If applicable When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable DISPOSING OF THE UNIT Before throwing out the device it is necessary to pull back the battery lt lt s a cells and get rid of them safely for recycling reasons
26. room temperature and the fan speed are controlled automatically 1 If necessary press 0 ON OFF button Result The On Off indicator on the wired remote controller comes on 4 The air conditioner runs in the mode selected when the unit was last used PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 To select the AUTO mode press the Mode button until ajo is displayed at the top of the wired remote controller Result The air conditioner runs in AUTO mode Note You can change modes at any time 3 To adjust the temperature press the Temperature buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press Temperature buttons The temperature is adjusted by 1 C The air conditioner takes the present temperature of the room every 30 minutes If the temperature is higher than the selected temperature a the air conditioner will start cooling If the temperature is lower than the selected temperature o the air conditioner will start heating Note ais a preset temperature for the most comfortable environ ment It can be adjusted by your installation specialist when installing the product ENGLISH
27. sal of This Product Waste Electrical amp Electronic Equipment Applicable in European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal ENGLISH View of the Unit The figures are shown in this instruction may differ from yours depending on the model Indoor Unit Air flow blades outlet F Refer to page 9 5 5 Air inlet Air filter under the grille Air inlet Rear it UBH1800E 2400E CH18ZAX 24ZAX CH18CAX 24CAX Air outlet Connection valve UCH3600G 4400G CH36ZAX 44ZAX C
28. the setting mode and or the temperature by pressing the Mode button or the Temperature buttons after setting the On timer To Cancel the On Timer 1 To cancel the On Timer press the On Timer button one or more times until the timer setting disappears 2 Press the Set Cancel button Note Ifyou want to turn on the air conditioner before the timer reaches the setting time press the ON OFF button Setting the Off Timer ENGLISH The Off Timer enables you to switch off the air conditioner automatically after a given period of time You can set the period of time from 30 minutes to 24 hours 1 To set the operating time press the Off Timer button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hour inclusive Result Each time you press Off Timer button The time is adjusted by 0 5 hour to 5 hours by 1 hour from 6 hours to 24 hours o 1 9 A A 2 Press the Set Cancel button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature disappear on the display after 5 seconds The air conditioner will switch off automatically when the counter displayed on the remote controller reaches the setting time as disappearing the Off timer setting If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours 1 Press the
29. ve the dust that accumulates on the air filter PORTANT Before cleaning your air conditioner ensure that you have switched off the electric circuit breaker used for the unit 1 Open the front grille by pushing the tabs on the grille PORTANT You must give attention when disassembling the front grille and must check the safety clips have been installed If you do not check them the front grille will drop suddenly and you will be hurt 2 Remove the front grille 2 1 Remove the safety clips 2 2 Open the front grille about 45 and pull it forward 3 Pull out the air filter 4 Remove all dust on air filter with a vacuum cleaner or a brush In case of serious dust accumulation put the air filter in warm detergent water and shake it vertically Note When you have installed the Bio Pure filter do not allow any liq uids to contact the filter It may lose its properties 5 Dry the air filter NN Cy 6 When you have finished insert the filter into the front grille 7 Clean the unit with a vacuum cleaner or a brush once a month N 8 Reinstall the front grille and the safety clips Note You can use all 4 points of the indoor unit for installing the front grille and the safety clips depending on your requirement Note After cleaning the air conditioner press the Filter Reset button Wired Remote Controller Wireless Remote Controller lt Z kb
Download Pdf Manuals
Related Search