Home

Samsung T22E390EX User Manual

1. This Samsung product is warranted for a period of twelve 12 months from the original date of purchase against defective materials and workmanship In the event that warranty service is required you should return the product to the retailer from whom it was purchased However Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned In case of difficulty details of our Authorised Service Centres are available from Samsung Electronics U K Ltd Customer Care Centre PO Box 479 GATESHEAD NE9 9BJ United Kingdom Tel 0330 SAMSUNG 7267864 Fax 0330 7260001 UK amp Northern Ireland Tel 0818 717100 Fax 44 117 915 6736 EIRE Only Web www samsung com WARRANTY CONDITIONS 1 The warranty is only valid if when warranty service is required the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation and the serial number on the product has not been defaced 2 Samsung s obligations are limited to the repair or at its discretion replacement of the product or the defective part 3 Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres No re imbursement will be made for repairs carried out by non Samsung Dealers and any such repair work and damage to the products caused by such repair work will not be covered by this
2. VHF UHF Aerial Cable PAA AL e t Aerial Cable Or aa AN ANTIN amp Plug the power cord into a wall outlet only after you have made all other connections amp If you are connecting your product to a cable or satellite box using HDMI Component or Composite connections you do not need to connect the ANT IN jack to an aerial or a cable connection amp Use caution when you move or swivel the product if the aerial cable is tightly connected You could break the aerial jack off the product Connecting the Power amp The picture may vary depending on the model Power Input English 18 Connections Connecting to AV Devices Blu ray Players DVD Players etc Using an HDMI Cable for an HD connection up to 1080p HD digital signals For the best quality HD picture we recommend using an HDMI connection Use with DVD players Blu ray players HD cable boxes and HD Set Top Box satellite receivers HDMI Cable amp HDMI IN 1 DVI HDMI IN 2 MHL e For the best picture and audio quality connect digital devices to the product using HDMI cables e An HDMI cable supports digital video and audio signals and does not require an audio cable To connect the product to a digital device that does not support HDMI output use an HDMI to DVI cable and audio cables e If you connect an external device to the
3. Application Menu Menu Applications Source List Menu Applications gt Source List amp When you press the SOURCE FI button Source screen will be displayed at once amp You can only choose external devices that are connected to the TV In Source connected inputs are highlighted amp For the detailed information refer to Changing the Input Source in User Manual Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and movie files to the USB port behind the TV 3 When USB is connected to the TV popup window appears You can select the Photos Videos or Music directly amp It might not work properly with unlicenced multimedia files SS Need to Know List before using Media Contents e MTP Media Transfer Protocol is not supported e The file system supports NTFS Read Only FAT16 and FAT32 e Certain types of USB Digital camera and audio devices may not be compatible with this TV e Media Contents only supports sequential jpeg format e Media Contents only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or da
4. Backlight Adjusts the brightness of the screen by adjusting the brightness of the individual pixels Contrast Menu Picture Contrast Increases or decreases the contrast between dark and light areas of the picture Brightness Menu Picture Brightness Adjusts the brightness of the screen Not as effective as Backlight Sharpness Menu Picture Sharpness Sharpens or dulls the edges of objects Colour Menu Picture gt Colour Adjust colour saturation levels Tint G R Menu Picture Tint G R Adjust tint levels for green and red To adjust picture quality follow these steps 1 Select an option you want to adjust When you select an option a slider screen appears 2 Adjust the option value using your remote Sy When you make change to option value the OSD will be adjusted accordingly amp You can adjust and store Settings for each external device connected to the product amp Lowering picture brightness reduces power consumption Response Time Normal Faster Fastest Accelerate the panel response rate to make video appear more vivid and nature English 29 Basic Features Picture Size Menu Picture Picture Size Using this function you can make change to various picture size and aspect ratio options e Picture Size If you have a cable box or satellite receiver it may have its own set of screen sizes as well However we highly recommend you
5. midi mka ra type O and type 1 Video Codec Fil Ei t Bit rat i Pa Container Video Codec Resolution kalagan la Audio Codec Extension fps Mbps avi mkv Divx 3 11 4 5 6 asf wmv MPEG4 SP ASP 1920 x 1080 Dolby Digital mp4 AVI LPCM 3gp MKV ADPCM IMA MS vro ASF H 264 BP MP HP AAC mpg MP4 HE AAC mpeg 3GP Motion JPEG 640 x 480 6 30 WMA tS VRO Dolby Digital Plus tp VOB paa aan MPEG MP3 trp PS MEOW NIECEYIOSON DTS Core mov TS G 711 A Law flv FERS 1920 x 1080 u Law vob gvi MPEG1 divx English 78 Other Information Other Restriction amp Video content will not play or not play correctly if there is an error in the content or the container amp Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the table above amp If the Index Table is in error the Seek Jump function is not supported amp The menu may take longer to appear if the video s bit rate exceeds 10Mbps amp Some USB digital camera devices may not be compatible with the player Video Decoders e Supports up to H 264 Level 4 1 does not support FMO ASO RS e VC1 AP L4 is not supported e GMC 2 is not supported e Frame speed Below 1280x720 60 frame max Above 1280x720 30 frame max Audio Decoders e WMA 10 Pro supports up to 5 1 channels Supports up to M2 profile e WMA lossless audio is not supported e Vorbis
6. VESA DMT 800 x 600 72Hz 48 077 72 188 50 000 VESA DMT 800 x 600 75Hz 46 875 75 000 49 500 MAG 832 x 624 75Hz 49 726 74 551 57 284 VESA DMT 1024 x 768 60Hz 48 363 60 004 65 000 VESA DMT 1024 x 768 70Hz 56 476 70 069 75 000 VESA DMT 1024 x 768 75Hz 60 023 75 029 78 750 VESA DMT 1152 x 864 75Hz 67 500 75 000 108 000 MAC 1152 x 870 75Hz 68 681 75 062 100 000 VESA DMT 1280 x 720 60Hz 45 000 60 000 74 250 VESA DMT 1280 x 800 60Hz 49 702 59 810 83 500 VESA DMT 1280 x 1024 60Hz 63 981 60 020 108 000 VESA DMT 1280 x 1024 75Hz 79 976 75 025 135 000 VESA DMT 1366 x 768 60Hz 47 712 59 790 85 500 VESA DMT 1440 x 900 60Hz 55 935 59 887 106 500 VESA DMT 1600 x 900RB 60Hz 60 000 60 000 108 000 VESA DMT 1680 x 1050 60Hz 65 290 59 954 146 250 VESA DMT 1920 x 1080 60Hz 67 500 60 000 148 500 amp For an HDMI to DVI cable connection you must use the HDMI IN 1 DVI jack amp The interlace mode is not supported amp The set may operate abnormally if you select a non standard video format amp Separate and Composite modes are supported SOG Sync On Green is not supported amp DPM Display Power Management Function does not work if you used in connection with the HDMI port of this product amp If an HDMI to DVI cable is connected to the HDMI IN 1 DVI port the audio does not work English 25 Connections Source When you are watching product and you w
7. Selecting a channel Select a channel by moving the Controller to the up and down directions when the power is on Using the function menu To view and use the Function menu press and release the Controller when the power is on To close the Function menu press and release the Controller again Selecting the MENU With the Function menu visible select the MENUM by moving the Controller to the left The OSD On Screen Display Menu appears Select an option by moving the Controller to the right Move the Controller to the right left up down directions to make additional selections To change a parameter select it and then press the Controller Selecting the MEDIA P With the Function menu visible select MEDIA P by moving the Controller to the up direction The MEDIA P main screen appears Select an application by moving the Controller and then pressing the Controller Selecting the SOURCE With the Function menu visible open the SOURCE amp by pushing the Controller to the right The Source screen appears To select a source move the Controller back and forth When the source you want is highlighted press the Controller Power off With the Function menu visible select Power off by pulling the Controller to the down direction and then press the Controller amp To close the Menu MEDIA P or Source press the Controller for more than 1 second amp When selecting the function by moving the controller to the up
8. and adjust the external device s output resolution accordingly Refer to the resolution settings of this manual There is a plastic smell from the product This smell is normal and will dissipate over time English 72 Other Information Issues Solutions and Explanations O The product Signal This function is only available for digital channels the product receives from an Aerial Information is unavailable in RF Coax connection the Self Diagnosis menu The product is tilted to the Remove the base stand from the product and reassemble it side The channel menu is grayed The Channel menu is only available when you select the product source out unavailable Your settings are lost after If the product is in the Store Demo mode it will reset audio and picture settings every 5 minutes or every time the 5 minutes Change the settings from Store Demo mode to Home Use mode using product is turned off the Setup procedure Select TV in the Source using your remote and go to Menu gt System Setup Other Information Issues Solutions and Explanations You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the product to a wall we recommend using cables with 90 degree connectors You see small pa
9. arrow button moves the focus 24 hours back or forward enabling faster browsing of the programming schedule However the focus cannot be on a time prior to the current time E Channel Category The TV s channel index is divided into different categories such as Favourites 1 5 Show All and TV Choose a category Schedule Manager Press button and navigate to the Schedule Manager screen to view a list of reserved programmes English 42 Basic Features Schedule Manager Menu Broadcasting s Schedule Manager Configure the TV to show a specific channel or programme at a specific time and date Before scheduling TV watching make sure that the date and time is set properly under the System gt Time gt Clock menu The icon appears next to programmes that have been configured for a Schedule Viewing You can view modify or delete a channel you have reserved to watch Using the Schedule Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the C4 button to select Schedule 2 Press the a w 4 b buttons to set the Aerial Channel Repeat Date or Start Time Aerial Select the desired antenna source Channel Select the desired channel Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want amp The J mark indicates the date is selecte
10. CAUTION AN AN This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product This symbol alerts you that important literature concerning operation and maintenance has been included with this product Power Related amp The following images are for your reference and may differ depending on models and countries AS Warning AEL Avoid using a damaged power cord or plug or a loose power outlet e Otherwise it may result in electric shock or fire Avoid plugging in or unplugging the power supply with wet hands e Otherwise it may result in electric shock Make sure to connect the power cord to a grounded wall outlet for insulation class 1 equipment only e Otherwise it may result in electric shock or injury Keep the power cord and the product away from a heater e Otherwise it may result in electric shock or fire English 4 Avoid connecting multiple electric appliances to a single wall outlet e Otherwise it may result in fire due to overheating of the wall outlet Plug the power plug in firmly e Otherwise it may result in fire Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord e Otherwise it may result in electric shock or fire due to a damaged power cord If the pins of the power p
11. Explanations PC Connection A Mode Not Supported message appears Set your PC s output resolution so it matches a resolution supported by the product PC is always shown on the source list even if a PC is not connected This is normal PC is always shown in the source list regardless of whether a PC is connected The video is OK but there is no audio If you are using an HDMI connection check the audio output setting on your PC Picture First perform the Picture Test and to see if your product is properly displaying the test image go to Menu Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may be caused by the source or signal The product image does not look as good as it did in the store Store displays are all tuned to digital HD high definition channels If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality SS Many HD channels are up scaled from SD Standard Definition contents Look for a channel that is broadcasting true HD content Cable Satellite subscribers Try HD channels from the channel line up e Terrestrial Cable Aerial connection Try HD channels after performing an Auto Tuning Adjust the Cable Sat box video output resolution to 1080i or 720p The picture is distorted macro block error small
12. Menu Support Software Update The Software Update menu lets you upgrade your product s software to the latest version Current Version This is the software version already installed in the product Upgrading to the Latest Version Check your TV s software version and upgrade it if necessary amp The TV will turn off and on automatically after completing the software upgrade All video and audio settings return to the default settings after a software upgrade e Update now Download the latest update file from the Samsung website Decompress the file and copy it into the root directory of a flash drive Insert the flash drive into the USB port to install the update e Auto update The TV will be updated automatically at the time you have set or after power off English 57 Preference Features Use Mode Menu Support gt Use Mode Select the Use Mode suitable for your place We strongly recommend you select Home Use e Home Use Home Use is the default setting e Store Demo Store Demo is for retail environments only If you select Store Demo some functions will not work and the picture settings will be reset every 5 minutes Contact Samsung Menu Support Contact Samsung View this information when your product does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English 58 Advanced Features
13. adjust and store settings for each external device you have connected to an input on the product e 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size Not available in HDMI Component and HDMI DVI mode English 31 Basic Features Auto Adjustment Menu Picture Auto Adjustment Automatically adjusts the picture s frequency position and fine tune settings in the PC mode amp Available only when you connect your PC to the product with a D Sub cable PC Screen Adjustment Menu Picture PC Screen Adjustment amp Available in PC mode only e Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone use the Coarse function to adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced re adjust the picture so that it is aligned with the centre of screen e Position Adjust the PC s screen position using your remote if it is not centre or does not fit the product screen e mage Reset Resets the image to the default settings Using Your Product as a Computer PC Display Entering the Video Settings Based on Windows 7 8 For your product to work properly as a computer display you must enter the correct video setti
14. button and then select the MHL con avai nector to display the mobile device s screen on the displayer The following remote control functions will also be lable e REW FF gt Play 1 Pause m Stop g Previous menu e Restrictions MHL has several requirements If you are using an HDMI adapter the displayer recongnises the signal as an HDMI signal and may respond differently than it would to an MHL to HDMI cable connection Upgrade the software to the latest version This product is officially MHL certified If users encounter any problem when using the MHL function they must contact the manufacturer of the device Some mobile devices may not have sufficient specifications or features to support MHL Because the displayer screen is wider than most mobile device screens the picture quality may appear lower on the displayer English 20 Connections Using a Component Cable up to 1080p HD signals or an Audio Video Cable 480i analogue signals only Use with DVD players Blu ray players cable boxes STB satellite receivers VCRs Audio Cable Video Cable lt OL CIA AUDIO YY VIDEO i atat dala Component Cable udio Cable Not Supplied Not Supplied PP woeo our aunio our je oJ AUDIO amp For better picture quality
15. displayed in Folder view mode only the files contained in the current folder can be selected To select files from other folders change the view mode Opening a Different File e Press q gt e Select the Previous Next on screen button Background Music Enable music to play in the background during a slideshow However all music files must be located on the same storage device Select the Background Music on screen button while a photo is displayed on the screen or a slideshow is in progress Select the music files you want to listen to and then Play To play the files in a random order select Shuffle English 63 Advanced Features Mini Player When viewing photos with background music you can control the music Select Background Music from among the on screen control buttons and select Mini Player You can pause playback or skip to the previous or next song Additional Photo Playback Settings e Zoom Select the Zoom on screen button Zoom in by up to a factor of 4 e Rotate Select the Rotate on screen button This rotates the photo e Picture Mode Select the Settings on screen button and then select Picture Mode Select a picture mode e Sound Mode Select the Settings on screen button and then select Sound Mode Select a sound mode e Information Select the Settings on screen button and then select Information to view detailed information about the current video English 64 Advanced Features MEDIA P M
16. files pressing the Select All Deselect All English 60 Advanced Features MEDIA P Videos You can play video files saved on USB device and or your PC amp For more information about the subtitle formats and codec formats refer to Supported Subtitle and Media Play file formats in the Other Information section Video Playback Select the video file from the list or press gt to play video Use the remote control or the on screen buttons to control the video playback Press or TOOLS 4J to bring up the on screen buttons and RETURN to hide them To stop playing the file press m or RETURN Playlist Creation From the Options list located at the top of the screen select Play Selected specify all the video files you wish to play and then select Play This creates a playlist If the list is displayed in Folder view mode only the files contained in the current folder can be selected To select files from other folders change the view mode Opening a Different File e Select the l lt lt gt gt on screen button e Select the Search on screen button and then select Search Titles Video Scanning e Press 4 gt This scans through the file in 10 second increments e Press gt This changes the playback speed by up to 300 To restore normal playback speed press gt Alternatively pause the video and then press to reduce the playback speed 1 8 normal 1 4 normal 1 2 normal Slow playback doesn
17. has been disconnected please repeat the device scan amp Some functions and pictures shown in this manual are available on specific models only amp To keep your product in optimum condition upgrade to the latest firmware on the Samsung web site by USB samsung com Support Downloads English 76 Other Information Subtitle External MPEG 4 timed text ttxt SAMI smi SubRip srt SubViewer sub Micro DVD sub or txt SubStation Alpha ssa Advanced SubStation Alpha ass Powerdivx psb Internal Xsub Container AVI SubStation Alpha Container MKV Advanced SubStation Alpha Container MKV SubRip Container MKV MPEG 4 Timed text Container MP4 Supported image resolutions File Extension Type Resolution Jpg jpeg JPG 15360 x 8640 bmp BMP 4096 x 4096 mpo MPO 15360 x 8640 Dm CMYK YCCK Colour space JPEG are not supported English 77 Other Information Supported music file formats File Extension Type Codec Comments mp3 MPEG MPEG1 Audio Layer 3 m4a mpa MPEG4 AAC aac flac FLAG FLAC Supports up to 2 channel gg OGG Vorbis Supports up to 2 channel WMA 10 Pro supports up to 5 1 channel and wma WMA WMA M2 profile WMA lossless audio is not supported wav wav wav mid o N The Seek jump function is not supported
18. is supported for up to 2 channels e Dolby Digital Plus is supported for up to 5 1 channels English 79 Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed amp You can change Teletext pages by pressing the numeric buttons on the remote control 0 A Teletext on mix off Activates the Teletext mode for the current channel Press the button twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext 2 store Stores the Teletext pages index Displays the index contents page at any time while you are viewing Teletext 4 size Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press it again For normal display press it once again E3 hold Holds the display at the current page in the case that there are several secondary pages that follow automatically To undo press it again Colour buttons red green yellow blue If the FASTEXT system is used by the broadcasting company the different topics on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press the colour corresponding to th
19. its own folder When using more than one of the same types of USB make sure the folders assigned to each USB have different names amp We recommend that you use a USB memory stick and a multi card reader when using the On Timer The On Timer function may not work with USB devices that have a built in battery MP3 players or PMPs made by some manufacturers because the product can take too long to recognise these devices amp If you set the On Timer to play a file saved on a USB devices it may take up to 40 seconds or more to play the file after the product is turned on e Off Timer Set Off Timer so that your product turns off automatically at a time and on a day of your choosing You can set up three separate Off Timer configurations Off Timer 1 Off Timer 2 Off Timer 3 amp You must set the clock before you can use the Off Timer Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want Off Timer to turn off your product amp The v mark indicates days you ve selected Time Set the time that the product turns off automatically English 51 Preference Features Eco Solution Menu System Eco Solution e Energy Saving Lets you adjusts the brightness of the product in order to reduce power consumption e No Signal Power Off To avoid unnecessary energy consumption you can set how long you want the product to remain on if it s not receiving a
20. menu items and change the values seen on the TV s menu Return to the previous menu PIP You can use PIP function page 33 AD SUBT Turn the audio description on and off This is not available in some locations Displays digital subtitles SPORTS Enable Sports Mode for the optimal sports viewing experience English 15 Display and selects the available video sources page 26 Return to the previous channel Cut off the sound temporarily Change channels You can enter Guide menu page 42 Display information on the product screen Exit the menu Use these buttons according to the directions on TV s screen Use these buttons in a specific feature Getting Started Installing batteries Battery size AAA Match the polarity of the batteries to the symbols in the battery compartment amp NOTE e Install the batteries so that the polarity of the batteries matches the illustration in the battery compartment e Use the remote control within 7 m of the product e Bright light may affect the performance of the remote control Avoid using it near fluorescent lights or neon signs e The colour and shape of the remote may vary depending on the model English 16 Getting Started Your product s Main and Tools menus contains functions that let you control the product s features For example in the Main menu you can change the size and configuration of the picture its brightnes
21. on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used English 6 Avoid installing the product where children may reach it e f a child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Install the aerial far away from any high voltage cables e Ifthe aerial touches or falls onto a high voltage cable it may result in electric shock or fire Do not place the product face down on the floor e This may damage the panel of the product When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury Getting Started Cleaning Related AN Warning _ Fe A Caut
22. play purchased DivX movies first register your device at vod divx com Find your registration code in the DivX VOD section of your device setup menu DivX Certified to play DivX video up to HD 1080p including premium content DivX DivX Certified and associated logos are trademarks of DivX LLC and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 This device supports DivX Plus Streaming for enjoying HD movies and TV shows with advanced features multi language subtitles multiple audio tracks chapters smooth FF RW etc streamed to your device Di WX This DivX Certified device has passed rigorous testing to ensure it plays DivX video HD Open Source License Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source License Notice is written only English Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate a these items from other typ
23. product that uses an older version of HDMI the video and audio may not work If this occurs ask the manufacturer of the device about the HDMI version and if it is out of date request an upgrade e Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur e We recommend using a basic high speed HDMI cable or an HDMI cable that is Ethernet compatible Note that this product does not support the Ethernet function via HDMI English 19 Connections Sharing Mobile Device Screens On the Displayer This displayer is capable of displaying mobile device screens You can use the following features to enjoy video photo and music files from mobile devices directly on your displayer Use an MHL cable to display a mobile device s screen on the displayer e MHL This displayer supports MHL Mobile High definition Link via an MHL cable Connect an MHL cable to the mobile dev con find devi e MHL ice and the displayer However MHL is only available through the HDMI IN 2 MHL port and only when used in junction with an MHL enabled mobile device This feature is only available with MHL certified mobile devices To out if your mobile device is certified visit its manufacturer s website You can also view a list of MHL certified ces on the official MHL website http Awww mhiconsortium org USE Connect an MHL cable to the mobile device and the displayer Press SOURCE amp
24. signal e Auto Power Off The product will automatically turn off if you don t press a button on your remote or product controller within 4 hours to prevent overheating Auto Protection Time Menu System Auto Protection Time If the screen displays a still image for a certain period of time you define the product activates the screen saver to prevent the formation of burnt in ghost images on the screen English 52 Preference Features Blocking Programmes Programme Rating Lock Menu Broadcasting Programme Rating Lock Depending on the country When turned on the Programme Rating Lock feature can automatically block programmes that you deem inappropriate for your children You must enter a PIN personal identification number before you can set or change any of the Programme Rating Lock restrictions amp The items of Programme Rating Lock differs depending on the country How to watch a restricted programme or movie If the product is tuned to a restricted programme or movie the Programme Rating Lock will block it The screen will go blank and the popup message appears Enter the PIN to unblock the programme or movie using your remote Change PIN Menu System Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them in the Enter New PIN Reenter the same 4 digits in the Confirm New PIN When the Confirm screen disappears select Close The product has memori
25. t support audio and is available in the forward direction only e Press II to pause the screen and then i1 to scan through the paused video in 1 frame increments Audio is not supported while the video is paused e Select the Search on screen button and then select Search Titles This will take you to a scene in the video e Select the Search on screen button and then select Search Time Bar This will take you to a time frame in the video e Select the M4 on screen button This plays the video from the beginning Show Subtitles If the external storage device contains a subtitle file with the same name as the video file being played you can choose to display subtitles on the screen Select the Settings on screen button and then select Subtitle Settings to show subtitles If the letters appear corrupted try changing the encoding setting If the subtitles do not match the video adjust the sync If the subtitles are too small increase the font size English 61 Advanced Features Additional Video Playback Settings Repeat Select the Repeat Mode on screen button This changes the repeat mode Repeat One repeats the current file only whereas Repeat All repeats all files contained in the folder Picture Size Select the Picture Size button and then select the picture size Picture Mode Select the Settings on screen button and then select Picture Mode Select a picture mode Sound Mode Select the Settings on screen button and
26. use your products 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to the 16 9 wide screen format Wide Zoom Magnifies the picture size more than 4 3 amp Adjusts the Position by using 4 Y buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size amp Adjusts the Zoom or Position by using a V button 4 3 Sets the picture to basic 4 3 mode amp Do not set your product to 4 3 format for a long time The borders displayed on the left and right or top and bottom of the screen may cause image retention Screen burn which is not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted Adjusts the Position by using a w 4 gt button Custom Magpifies or shrinks 16 9 pictures vertically and or horizontally A magnified or shrunk picture can be moved left right up and down NOTE e Depending on the input source the picture size options may vary e The available items may differ depending on the selected mode e When connecting a PC only 16 9 and 4 3 modes can be adjusted e Settings can be adjusted and stored for each external device connected to an input on the product e If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan fun
27. watched channels as favourites Favourites channels are highlighted in Edit Channel and channel list screens with the symbol You can create up to 5 favourites channel lists You can also rename and edit favourites channel lists Category Show up the channel list by the following categories All TV Analogue Recently Viewed Most Viewed e El Change Fav Show up a favourite list e Select All Deselect All Select or deselect all the channels e P Add Delete Add delete the channel to from a favourite list Go To You can enter a channel number immediately using your remote control e Page Move to next or previous page e TOOLS Show the Tools list English 45 Basic Features Add Channels Add a channel to a favourites channels list 1 Press EY button to bring up the channel list containing the channels you wish to add and then select the channels 2 Press E button to bring up a favourites channels list and then B button to add the selected channels Remove Channels Remove channels from a favourites channels list 1 Press A button to bring up a favourites channels list and then select the channels you wish to remove 2 Press button to remove the channels from the list Rename a Favourites Channel List Rename an existing favourites channels list 1 Press TOOLS 4J button and select Rename Favourites from the list 2 Rename the list in the popup window The new name can be up to 20 ch
28. when prompted with a message This initiates the Auto Tuning function The process can take up to 30 minutes to complete If Starting the Auto Tuning function when there is an existing index of channels overwrites the previous index e Auto Tuning Scans for channels automatically and stores them in the TV s memory e Cable Search Option when the aerial was set to Cable Depending on the country Sets additional search options such as the frequency and symbol rate for a cable network search Country Area Menu Broadcasting Channel Settings Country Area Select your country so that the product can correctly auto tune the broadcasting channels Sa The PIN input screen appears Enter your 4 digit PIN number e Digital Channel Change the country for digital channels e Analogue Channel Change the country for analogue channels English 39 Basic Features Manual Tuning Menu Broadcasting Channel Settings s Manual Tuning Scans for a channel manually and stores in the TV amp If a channel is locked using the Channel Lock function the PIN input window appears amp This function may not be supported depending on the region e Digital Channel Tuning Scans for a digital channel 1 Select the New amp When selecting Aerial Terrestrial Channel Frequency Bandwidth amp When selecting Aerial Cable Frequency Modulation Symbol Rate 2 Select the Search When scanning has finished a channel is updated in
29. wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW Adaptor information AQ Use following adapter to avoid hazard Manufacturer SAMSUNG Adaptor model A4514N DSM A4514 DSM A3514 ESM Manufacturer Powernet Adaptor model A3514 FPN To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall not be placed onthe apparatus For power cord use see user manual ATENCION SOLO PARA USO EN INTERIORES Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please con act the SAMSUNG customer care centre Country Customer Care Centre T Web Site AUSTRIA 0800 SAMSUNG 0800 7267864 www samsung com at support BELGIUM 02 201 24 18 www samsung com be support Dutch www samsung com be_fr support French BOSNIA 055 233 999 www samsung com support BULGARIA 800 111 31 Be3nnatHa TenecboHHa nuHua www samsung com bg support
30. you turn the product off while watching in the PIP mode the PIP function is reset to Off When you turn your product on you must turn PIP on again to watch in the PIP mode amp You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main screen to view a game or karaoke amp PIP Settings Main picture TV PC AV Component HDMI1 DVI HDMI2 SCART Sub picture TV PC AV Component HDMI1 DVI HDMI2 SCART main screen TV AV Component PC HDMI1 DVI HDMI2 SCART TV x x o o o o x AV x x x o o o x Component o x x x o o x ae PC o o x x o o x HDMI1 DVI o o o o x x o HDMI2 o o o o x x o SCART x x x x o o x O Available X Not Available English 33 Basic Features Advanced Settings Menu Picture Advanced Settings Using this function you can configure advanced picture settings to create your preferred picture amp Available when the Picture Mode is set to Standard or Movie amp When connecting a PC you can make changes to the White Balance or Gamma Advanced Settings e oons of Black Tone Flesh Tone RGB Only Mode Colour Space White Balance Gamma e Dynamic Contrast Off Low Medium High Adjust the screen contrast e Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth e Flesh Tone Emphasise pink Flesh Tone e RGB Only Mode Off Red Green Blu
31. 9 www samsung com rs support SLOVAKIA 0800 SAMSUNG 0800 726 786 www samsung com sk support SPAIN 0034902172678 www samsung com es support SWEDEN 0771 726 7864 0771 SAMSUNG www samsung com se support SWITZERLAND 0800 726 78 64 0800 SAMSUNG www samsung com ch support German www samsung com ch_fr support French UK 0330 SAMSUNG 7267864 www samsung com uk support EIRE 0818 717100 www samsung com ie support LITHUANIA 8 800 77777 www samsung com lt support LATVIA 8000 7267 www samsung com lv support ESTONIA 800 7267 www samsung com ee support TURKEY 444 77 11 www samsung com tr support 2015 Samsung Electronics Co Ltd All rights reserved BN46 00461B 03
32. CROATIA 072 726 786 www samsung com hr support CZECH 800 SAMSUNG 800 726786 www samsung com cz support Samsung Electronics Czech and Slovak s r o V Parku 2343 24 148 00 Praha 4 DENMARK 70 70 19 70 www samsung com dk support FINLAND 030 6227 515 www samsung com fi support FRANCE 01 48 63 00 00 www samsung com fr support GERMANY 0180 6 SAMSUNG bzw www samsung com de support 0180 6 7267864 0 20 Anruf aus dem dt Festnetz aus dem Mobilfunk max 0 60 Anruf CYPRUS 8009 4000 only from landline toll free GREECE 80111 SAMSUNG 80111 726 7864 only from land line www samsung com gr support 30 210 6897691 from mobile and land line HUNGARY 0680SAMSUNG 0680 726 786 http www samsung com hu support 0680PREMIUM 0680 773 648 ITALIA 800 SAMSUNG 726 7864 www samsung com it support LUXEMBURG 261 03 710 www samsung com support MONTENEGRO 020 405 888 www samsung com support SLOVENIA 080 697 267 brezpla na tevilka www samsung com si support 090 726 786 0 39 EUR min klicni center vam je na voljo od ponedeljka do petka od 9 do 18 ure NETHERLANDS 0900 SAMSUNG 0900 7267864 E 0 10 Min www samsung com nl support NORWAY 815 56480 www samsung com no support POLAND 801 172 678 lub 48 22 607 93 33 www samsung com pl support koszt po czenia wed ug taryfy operatora PORTUGAL 808 20 7267 www samsung com pt support ROMANIA 08008 726 78 64 08008 SAMSUNG www samsung com ro support Apel GRATUIT SERBIA 011 321 689
33. Diagnosis s Sound Test RF Cable Aerial Connection The product is not receiving all channels Make sure the coaxial cable is connected securely Please try Setup to add available channels to the channel list Go to Menu gt System Setup and wait for all available channels to be stored Verify the aerial is positioned correctly The picture is distorted macro block error small block dots pixelization The compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A weak signal can cause picture distortion This is not a product problem Others Purple green rolling horizontal bars and buzzing noise from the product speakers with a Component cable connection Remove the left and right audio connections from the Set Top box If the buzzing stops this indicates that the Set Top box has a grounding issue Replace the Component video cables with an HDMI connection The picture won t display in full screen HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars will appear on the top and bottom of the screen when you watch movies that have aspect ratios different from your product Adjust the picture size options on your external device or the product to full screen A Mode Not Supported message appears Check the supported resolution of the product
34. Go To edit or delete channels Change Number Edit the number by pressing the number buttons desired amp This function may not support depending on the region e E Delete You can delete a channel to display the channels you want Lock Unlock Lock a channel so that the channel cannot be selected and viewed Unlock a locked channel Default PIN is 0 0 0 0 e P Select All Deselect All You can select all the channels or cancel all the selected channels e 0 9 Go To You can enter a channel number immediately using your remote control e Page Move to next or previous page e TOOLS Show the Tools list Remove channels Menu Broadcasting Edit Channel Remove registered channels from the index Removing channels appearing in the channel list clears the channels from the list only and does not remove them from the index 1 From the screen select the channels you wish to remove Unselect channels by choosing them again 2 Press E button A pop up appears asking Delete the selected channels select Yes The selected channel s will be deleted Rename Analogue Channels Select a channel you wish to rename from the Edit Channel screen press TOOLS 4J button and then select Rename channels from the list Analogue channels only You can now rename the selected channel The new name can be up to 5 characters long Edit Favourites Menu Broadcasting Edit Favourites You can designate frequently
35. OUT amp NOTE e For an HDMI to DVI cable connection you must use the HDMI IN 1 DVI jack e For PC s with DVI video out jacks use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 1 DVI jack on the product Use the PC s speakers for audio Engish 23 Connections Connecting to a COMMON INTERFACE slot Your product viewing Card Slot Using the CI or Cl CARD To watch paid channels the Cl or Cl CARD must be inserted e f you don t insert the Cl or Cl CARD some channels will display the message Scrambled Signal e The pairing information containing a telephone number the Cl or Cl CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider o a x Fa 5 EF zZ o 5 o o e When the configuration of channel information has finished the message Updating Completed is displayed indicating the chamnel list is updated NOTE e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it e Insert the Cl or Cl CARD in the direction marked on the card e The location of the COMMON INTERFACE slot may be different depending on the model e Cl or Cl CARD is not supported in s
36. Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No el Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances Product design and specifications may be changed without notice Digital TV notice 1 Functionalities related to Digital TV DVB are only available in countries areas where DVB T T2 MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T T2 or DVB C signal 2 DVB T T2 is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast transmission of digital TV over cable However some differentiated features like EPG Electric Programme Guide VOD Video On Demand and so on are not included in this specification So they cannot be workable at this moment 3 Although this TV set meets the latest DVB T T2 and DVB C standards as of August 2008 the compatibility with future DVB T T2 digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed 4 Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you m
37. a Play file formats 77 Adjusting Picture Settings aaa 29 e Analogue Channel Teletext Feature oo cece 80 Changing the Picture SIZE 30 e Attaching a Wall Mount Desktop Stand 81 e Calibrating the Screen Display 32 e Installing lhe Wall MOUN satan ei Picture In Picture PP 33 e Anti theft Kensington LOCK 84 e Changing the Picture Options umaasa 34 Storage and Maintenance 1 11 1112 12 1 1 85 e Changing the Preset Sound Mode scesceceeeteeees 36 Aa ari soannen ese rates so e Adjusting Sound Settings 37 Aa e oer Sear eee or Memorising Channels ccsecsessessseeeeeeereseeeees 39 a a ate ena AA sg Check the Symbol D Note Indicates additional information Step by Step Guide Check here for instructions on how to open the relevant submenu within the OSD on screen display English 3 Getting Started Icons used for safety precautions Failing to follow the precautions marked with this sign may result in a serious injury or WARNING even a fatality Failing to follow the precautions marked with this sign may result in a personal injury CAUTION or property damage ZN A o Do not perform Must be followed RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACk THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL
38. all consistent For example if you ve used the AV In jack on your product make sure you have used the AV Out jack on your video source e You have connected to your devices to the correct jacks For example if you use the Component jacks labeled Pb Pr and Y to connect your product and video source make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the product the red Pr jack on the source to the red Pr jack on the product Screen Brightness If you find that the colours on your Samsung product are correct but just a little too dark or bright try adjusting the following settings in the Picture option in the Main menu e Backlight Contrast Brightness Sharpness Colour Tint G R and so on Go in to Picture on user Menu then try adjusting options mentioned above Unwanted Powering Off If your Samsung product appears to turn off by itself there may be an issue with either your Timer settings or your Eco friendly No Signal Power Off feature First make sure Sleep Timer is not accidentally set The Sleep Timer turns off the product automatically after a certain period of time has passed e Sleep Timer Menu System Time Sleep Timer If the Sleep Timer is not activated you may have engaged the No Signal Power Off or Auto Power Off feature e No Signal Power Off Menu System Eco Solution gt No Signal Power Off e Auto Power Off Menu System Eco Solu
39. ally e Panel Lock Lock or unlock all the keys on the product Controller at once When Panel Lock is on the product Controller does not operate e Boot Logo Displays the Samsung logo when the product is turned on English 54 Preference Features Anynet HDMI CEC Menu System Anynet HDMI CEC Allows you to control all connected Samsung devices that support anynet with your Samsung product s remote For details on set up options refer to the Anynet HDMI CEC instructions page 66 DivX Video On Demand Menu System DivX Video On Demand Shows the registration code authorised for the product If you connect to the DivX web site and register with 10 digit registration code you can download the VOD activation file Once you play it using Media Play the registration is completed amp For more information on DivX R VOD visit http vod divx com English 55 Preference Features Self Diagnosis Menu Support gt Self Diagnosis e Picture Test Use to check for picture problems Picture Test displays a high definition picture that you can examine for flaws or faults Yes Select Yes if the test picture does not appear or there is noise or distortion in the test picture There may be a problem with the product Contact Samsung s Call Centre for assistance No Select No if the test picture displays properly There may be a problem with your external equipment Please check your conne
40. ant to watch a movie on your DVD player or Blu ray player or switch to your cable box or STB satellite receiver you need to change the Source TV Ext PC HDMI1 DVI HDMI2 AV Component 1 Press the SOURCE FI button on your remote The Source screen appears 2 Select a desired external input source amp Use to select TV or other external input sources such as DVD Blu ray players cable box STB satellite receiver connected to the TV amp You can only choose external devices that are connected to the product In the displayed Source list connected inputs are highlighted 8o In the Source TV Ext and PC are always stays activated How to Use Edit Name Edit Name lets you associate a device name to an input source To access Edit Name open the Tools menu when the Source list is displayed The following selections appear under Edit Name VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Select an input jack and then select the name of the device connected to that jack from the list that appears amp If you connect a PC to the HDMI IN 1 DVI port with an HDMI cable assign PC to HDMI1 DV in Edit Name amp If you connect a PC to the HDMI IN 1 DVI port with an HDMI to DVI cable assign DVI PC to HDMI1 DVI in Edit Name amp If you connect an AV device to the HDMI IN 1 DVI port with an HDMI to DVI cable ass
41. aracters long Rearrange the Favourites Channels List Rearrange the order of the channels in a Favourites Channels List 1 Press E button to bring up a favourites channels list and select the channel you wish to move 2 Press EX button to rearrange the order of the selected channel Press 4 button Copy a Favourites Channels List Copy channels from one favourites channels list to another 1 Press button to bring up a Favourites Channels List and select the channels you wish to copy 2 Press TOOLSFT button select Copy to Favourites from the list and then select the Favourites Channels List s you wish to copy to This copies over the channels to the selected Favourites Channels List s English 46 Basic Features Fine Tune Menu Broadcasting Channel Settings Fine Tune analogue channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is Clear amp Select the channel and then select Fine Tune amp Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner amp To reset fine tuning select the channel select Fine Tune and then select Reset on the Fine Tune screen Transfer Channel List Menu Broadcastin
42. ay be required to agree to terms and conditions of their business 5 Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with some cable service providers 6 For more information please contact your local Samsung customer care centre amp The reception quality of TV may be affected due to differences in broadcasting method between the countries Please check the TV performance in the local SAMSUNG Authorised Dealer or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of LED screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to e Manual for details English 2 Contents Getting Started e The Standard Remote Control Butto
43. block dots pixelization The compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies A weak or bad quality signal can cause picture distortion This is not a product issue Mobile phones used close to the product within 3 3 ft may cause noise in the picture on analogue and digital channels Colour is wrong or missing If you re using a Component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen The colour is poor or the picture is not bright enough Adjust the Picture options in the product menu go to Picture Mode Colour Brightness Sharpness Adjust the Energy Saving option in the product menu go to Menu System Eco Solution Energy Saving Try resetting the picture to view the default picture settings go to Menu Picture gt Reset Picture English 71 Other Information Issues Solutions and Explanations There is a dotted line on the edge of the screen If the Picture Size is set to Screen Fit change it to 16 9 Change the cable satellite box resolution The picture is black and white If you are using an AV composite input connect the video cable yellow to the Green jack of Component on the product When changing channels the picture freezes or is distorted or delayed If
44. box A CAUTION INSERT SECURELY LEST SHOULD BE DETACHED IN SET e Remote Control amp Batteries AAA x 2 e Warranty Card Safety Guide Depending on the model e SW Driver CD e Power Cord Stand Base Stand Connector D sub Cable Input Cables Sold Separately You will need one or more of these cables to connect your product to your antenna or cable outlet and your peripheral devices Blu ray players DVD players etc Bt J Sp Si P cv Ka sai Component Composite AV Coaxial RF gt _ gt HDMI DVI Stereo Cable For the best cable connections to this product use cables no thicker than the cable illustrated below e Maximum thickness 0 55 inches 14mm English 12 Getting Started Installing the Stand English 13 Getting Started Using the Control Panel Sa The product colour and shape may vary depending on the model The product s Controller a small joy stick like button on the rear right side of the TV lets you control the TV without the remote control Selecting the Media Play Selecting the Menu Selecting a Source T Power off JI TV Controller Remote control sensor kb ck Power on Turn the TV on by pressing the Controller when the TV is in standby mode Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on
45. ce you can use to physically fix your product in place when using it in a public place You wrap the Kensington Lock s cable around a large immobile object and then attach the lock to the Kensington slot on the back of the product The appearance and locking method may differ from the illustration below depending on the manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use The Kensington Lock is not supplied by Samsung lt Optional gt amp Please find a fa icon on the rear of the product The Kensington slot is beside the fa icon To lock the product follow these steps 1 Wrap the Kensington Lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock amp These are general instructions For exact instructions see the User manual supplied with the locking device amp The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the product model English 84 Other Information Storage and Maintenance If a sticker was attached to the product screen some debris can remain after you remove the sticker Please clean the debris off before watching product The exterior and screen o
46. ct or consequential loss or any damage to records compact discs videos or audio taper or any other related equipment or material 8 Some products may differ from these guidelines Please check with your dealer or the local Samsung web site Wiring the Mains Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitably approved extension lead or consult your de aler for assistance However if there is no alternative but to cut off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The
47. ction Zoom Position You can adjust picture size and position by a w 4 P button amp It s only available when picture size is set as Zoom Wide Zoom Screen Fit and Custom amp In Wide Zoom and Screen Fit mode you can only use Position adjustment amp Reset Reset the Zoom and Position to the default settings English 30 Basic Features To use the Position function after selecting Wide Zoom Zoom or Screen Fit follow these steps 1 Select the Position 2 On the Position screen select Position and then move the picture to position you want using your remote 3 When done select Position again and then select Close 4 To reset the picture position select Reset Picture Sizes available by Input Source ATV EXT AV Auto Wide 16 9 Wide Zoom Zoom 4 3 Custom DTV 576i p 720p Auto Wide 16 9 Wide Zoom Zoom 4 3 Custom DTV 1080i 1080p Auto Wide 16 9 Wide Zoom Zoom 4 3 Screen Fit Custom Component 480i p 576i p 720p 16 9 Wide Zoom Zoom 4 3 Custom Component 1080i 1080p 16 9 Wide Zoom Zoom 4 3 Screen Fit Custom HDMI 480i p 576i p 16 9 Wide Zoom Zoom 4 3 Custom HDMI 720p 1080i 1080p 16 9 Wide Zoom Zoom 4 3 Screen Fit Custom amp Depending on the input source the picture size options may vary 8o The available items may differ depending on the selected mode amp HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 You can
48. ctions If the problem persists refer to the external device s user manual e Sound Test Use the built in melody to check for sound problems Yes Select Yes if you can hear sound from only one speaker or from neither speaker during the sound test There may be a problem with the product Contact Samsung s Call Centre for assistance No Select No if you can hear sound from the speakers There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual e Signal Information Digital channels only The reception quality of over the aerial HD channels is either perfect or the channels are unavailable Signal Information displays HD channel signal strength so you can adjust your aerial to increase signal strength and receive HD channels English 56 Preference Features e Reset Reset all setting to factory defaults To reset your product to default setting follow these steps 1 Go to the Reset menu Support Self Diagnosis Reset 2 The PIN input screen appears Enter the four digit security PIN using your remote 3 When done the PIN screen disappear automatically The message All the settings will return to factory defaults appears 4 Select Yes All settings are reset The product will turn off and on again automatically The Setup screen appears For more information about Setup see the paper user manual Software Update
49. d Date you can set desired date amp It is available when you select Once in Repeat Start Time You can set start time you want amp On the Information screen you can change or cancel a reserved information Delete Delete a show you have reserved to watch Edit Change a show you have reserved to watch Return Return to the previous screen English 43 Basic Features Digital Channel Schedule Viewing Schedule Viewing for programmes on digital channels can be set up through the following two options e Guide From Guide select a programme you wish to view e Programme Info Press INFO7 button and select a programme you wish to view Analogue Channel Schedule Viewing The Schedule Viewing function for programmes on analogue channels can be set up by specifying the time and date Run Schedule Manager and then select Schedule A popup menu will appear Select Schedule Viewing to proceed Specify that programme s Channel Repeat and Start Time and then select OK to finish Cancel a Schedule Viewing To cancel a Schedule Viewing for a specific programme select the programme from the Schedule Manager screen A popup menu will appear Select Delete to cancel Edit Timer List Select an entry from the Schedule Manager screen and then select Edit from the popup menu Edit the settings of the selected entry English 44 Basic Features Edit Channel Menu Broadcasting Edit Channel You can add
50. d when Media Contents is run use the Empty the Recycle Bin function on the PC to permanently delete the file If the number of files and folders saved on a USB storage device is approximately over 4000 the files and folders may not appear and some folders may not be opened Disconnecting a USB Device Press the SOURCE J button Select a desired USB device and then press the TOOLS 4J button The Tools menu appears Select Disconnect USB Device and then wait until the selected USB device is disconnected You can remove a USB device from the TV amp To remove a USB device from the TV we recommend use Disconnect USB Device function Media Play Menu Applications Media Play Enjoy photos music and movie files saved on a USB Mass Storage Class MSC device i 2 3 4 Press the MEDIA P button Press 4 gt button to select desired menu then press the C button Press 4 gt button to select desired device then press the C button again Press the 4 w 4 gt button to select the desired file in the list then press the C button or gt Play button Playing the selected files 1 2 Press the 4 button to select Options at the top of each main screen and select Play Selected Select the desired files amp The check box appears to the left of the selected files amp Press C button again to deselect the file Press the amp button to select Play You can select or deselect all
51. dapter wet when you wash the floor Always keep power adaptor in well ventilated area Getting Started Providing Proper Ventilation for Your Product When you install your product maintain a distance of at least 10 cm between the product and other objects walls cabinet sides etc to ensure proper ventilation Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature amp Whether you install your product using a stand or a wall mount we strongly recommend you use parts provided by Samsung Electronics only e f you use parts provided by another manufacturer it may cause difficulties with the product or result in injury caused by the product falling Installation with a stand Installation with a wall mount pe liom 4 ro fiom 10cm 10cm 100m 10cm gt gt do ea oe 10cm Other Warnings amp The actual appearance of the product may differ from the images in this manual depending on the model amp Be careful when you touch the product Some parts can be somewhat hot English 11 Getting Started amp Please make sure the following items are included with your product If any items are missing contact your dealer amp The items colours and shapes may vary depending on the model amp Make sure that there are no accessories hidden behind or under packing materials after you open the
52. down left right directions be sure not to press the controller If you press it first you cannot operate it to move the up down left right directions Standby mode Your product enters Standby mode when you turn it off and continues to consume a small amount of electric power To be safe and to decrease power consumption do not leave your product in standby mode for long periods of time when you are away on vacation for example It is best to unplug the power cord Setup The initial setup dialog appears when the TV is first activated l Follow the on screen instructions to finish the initial setup process including menu language choice country choice channel source choice channel scan and more 3 At each step either make a choice or skip the step Users can manually perform this process at a later time under the System 5 Setup menu amp The default PIN code is 0 0 0 0 English 14 Getting Started The Standard Remote Control Buttons amp This remote control has Braille points on the Power Channel and Volume buttons and can be used by visually impaired persons Turn the product on and off Give direct access to channels Alternately select Teletext ON Double Mix or OFF Adjust the volume Display channel list on the screen page 41 View the Media Play Open the OSD Menu Quickly select frequently used functions Use this button in a specific feature Move the cursor select the on screen
53. e Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation e Colour Space Auto Native Adjust the range of colours available to create the image e White Balance Adjusts the Colour temperature of the picture so that white objects look white instead of for example slightly pink or slightly yellow and the overall Colour of the picture looks natural R Offset G Offset B Offset Adjusts each Colour s red green blue darkness R Gain G Gain B Gain Adjusts each Colour s red green blue brightness Reset Resets the White Balance to its default settings e Gamma Adjust the primary colour intensity e Motion Lighting Off On Reduce power consumption by brightness control Basic Features Picture Options Menu Picture Picture Options Using this function you can configure additional picture settings to suit your preference amp When connecting a PC you can only make changes to Colour Tone Picture Options Saas Digital Clean View MPEG Noise Filter LED Clear Motion e Colour Tone Cool Standard Warm1 Warm2 amp Warm1 or Warm2 will be deactivated when the picture mode is Dynamic amp Settings can be adjusted and stored for each external device connected to an input on the product e Digital Clean View Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your product is weak you can activate the Digital Clea
54. e Colour Tone Contact Samsung Contrast D Digital Clean View DivX Video On Demand DTS TruDialog DTS TruSurround HD Dynamic Contrast 34 39 66 48 52 39 38 29 34 29 53 41 29 34 35 58 29 35 55 37 37 34 E Eco Solution Energy Saving Entertain Equaliser F Film Mode Fine Tune Flesh Tone G Game Mode Gamma General H HDMI Black Level L LED Clear Motion Licence M Media Play Menu Language Motion Lighting MPEG Noise Filter Music playback English 88 52 52 28 37 35 47 34 54 34 54 35 35 86 60 54 34 35 65 N No Signal Power Off o Off Timer On Timer P Panel Lock Photos In AllShare Play Picture Mode Picture Options Picture Size Picture Test PIP Programme Rating Lock R Reset Picture Reset Sound RGB Only Mode 52 51 51 54 63 28 35 30 56 33 53 36 38 34 Other Information S Schedule Manager Self Diagnosis Setting up Anynet HDMI CEC Sharpness Signal Information Sleep Timer Software Update Sound Effect Sound Mode Sound Test Speaker Settings Supported music file formats Supported Subtitle and Media Play file formats T Time Tint G R Troubleshooting V Video Codec Video Playback W White Balance 43 56 67 29 56 50 57 37 36 56 38 78 77 50 29 69 78 61 34 English 89 Warranty Card mas Il YAAN United Kingdom Republic of Ireland EIRE
55. e topic of your choice A new colourcoded page is displayed Items can be selected in the same way To display the previous or next page press the corresponding coloured button 7 mode Selects the Teletext mode LIST FLOF If pressed during LIST mode switches the mode to List save mode In List save mode you can save a Teletext page into a list using the 8 store button 1 English 80 sub page Displays the available sub page page up Displays the next Teletext page O page down Displays the previous Teletext page 11 reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again amp cancel Shrinks the Teletext display to overlap with the current broadcast Typical Teletext page Te o a Contents Selected page number Broadcasting channel identity ojo j gt Current page number or search indications Date and time Text Status information FASTEXT information njm o Other Information Preparing before installing Wall Mount Desktop Stand 1 Turn the product off and unplug the power cord from the wall outlet 2 Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down 3 Hold the main body of the product with your hand Pull the stand in the direction of the arro
56. enu Sound Sound Mode Sound modes apply preset adjustments to the sound e Standard Selects the normal sound mode e Music Emphasises music over voices e Movie Provides the best sound for movies e Clear Voice Emphasises voices over other sounds e Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired English 36 Basic Features Sound Effect Menu Sound Sound Effect amp Available only when the Sound Mode is set to Standard e DTS TruSurround HD Produces sound that will make you feel like you are sitting in a movie theatre or concert hall e DTS TruDialog Increases the voice intensity to make dialog clearer e Equaliser The Equaliser displays a series of sliders Use the arrow buttons to select a slider and change the slider s value To Reset the Equaliser select the Reset A pop up appears asking if you want to reset select Yes otherwise select No To exit select Close Balance L R Adjusts the balance between the right and left speaker 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the loudness of specific bandwidth frequencies Reset Resets the equalizer to its default settings English 37 Basic Features Speaker Settings Menu Sound Speaker Settings e Auto Volume Because each station has its own broadcasting conditions the volume may fluctuate each time you change the channel This feature aut
57. es of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system English 86 Other Information Oncratin Temperature 10 C 40 C Environmental P g Humidity 10 80 non condensi
58. evices of the same type English 66 Advanced Features Anynet HDMI CEC Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the product View TV Change from Anynet mode to product broadcast mode device name Menu Shows the menu of the connected device E g if a DVD player is connected the disc menu of the DVD player will appear device name Tools Shows the Tools menu of the connected device E g if a DVD player is connected the Tools menu of the DVD player will appear amp Depending on the device this menu may not be available device_name Title Menu Shows the title menu of the disc in the connected device E g If a DVD player is connected the title menu of the movie in the DVD player will appear amp Depending on the device this menu may not be available Setting up Anynet HDMI CEC Anynet HDMI CEC To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off Set an Anynet Device to turn off automatically when the product is turned off amp If Auto Turn Off is set to Yes running external devices will turn off at the same time as the product powers off amp May not be enabled depending on the device English 67 Advanced Features Switching between Anynet Devices ii 2 Open the Tools menu
59. f the product can get scratched during cleaning Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches Do not spray water directly onto the product Any liquid Clean the product with a soft cloth dampened with a that goes into the product may cause a failure fire or small amount of water Do not use a flammable liquid electric shock e g benzene thinners or a cleaning agent English 85 Other Information DOLBY Manufactured under License from Dolby Laboratories DIGITAL PLUS Dolby and the double D symbol are trademarks of Dolby Laboratories For DTS patents see http patents dts com Manufactured under license from DTS Inc DTS the c3 dts Symbol DTS in combination with the Symbol DTS Premium Sound DTS Digital Surround and DTS Express are registered trademarks or trademarks of DTS Inc in the United States and or other countries DTS Inc All Rights Reserved Premium Sound For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol DTS in combination with the Symbol and DTS Studio Sound are registered Studio Sound trademarks or trademarks of DTS Inc in the United States and or other countries DTS Inc All Rights Reserved o H Omi The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries To
60. g s Channel Settings Transfer Channel List Imports or exports the channel map You should connect USB storage to use this function amp The PIN input screen appears Enter the PIN using your remote e Import from USB Import channel list from USB e Export to USB Export channel list to USB This function is available when USB is connected amp USB format should be FAT32 and NTFS Delete CAM Operator Profile Menu Broadcasting Channel Settings Selects the CAM operator to delete Subtitle Menu Broadcasting Subtitle Use this menu to set the Subtitle mode e Subtitle Off On Switches subtitles on or off Subtitle Mode Normal Hearing Impaired Sets the subtitle mode Subtitle Language Sets the subtitle language e Primary Subtitle Set the primary subtitle language e Secondary Subtitle Set the secondary subtitle language amp If the programme you are watching does not support the Hearing Impaired function Preferred automatically activates even if the Hearing Impaired mode is selected amp English is the default in cases where the selected language is unavailable in the broadcast English 47 Basic Features Audio Options Menu Broadcasting Audio Options e Audio Language Digital channels only Change the default value for audio languages amp The available language may differ depending on the broadcast Primary Audio Set the primary audio language Secondary Audio Set
61. his may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use the cleansing cloth To move the product turn the power off and unplug the power cord the aerial cable and any other wires connected to the product e Otherwise it may result in electric shock or fire due to the damaged power cord Getting Started If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service centre e Otherwise it may result in electric shock or fire If you drop the product or the case is damaged turn the power off and unplug the power cord Contact a service centre e Otherwise it may result in fire or electric shock When thunder or lighting occurs oz unplug the power cord and under Of E E a no circumstance touch the aerial Ma set Q lt cable as this is dangerous 8 e Otherwise it may result in 9 ra electric shock or fire Avoid moving the product by pulling the power cord or aerial cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem wi
62. ice or a set top box connected to one of the product s inputs HDMI1 AV etc amp You must set the clock before you can use the On Timer function Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want On Timer to turn on your product amp The v mark indicates days you ve selected Time Set the time that the product turns on automatically Volume Set the desired volume level Change the volume level using your remote Source To select what will be turned on when the timer setting is activated You can set the product to turn on a specific channel or play back contents such as Photos Videos or Music files located in an external device connected to the product The USB device must be connected to your product before you can select USB Aerial when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files you want played when the product turns on automatically amp If there is no music file on the USB device or you don t select a folder containing a music file the Timer function does not operate correctly amp If there is only one photo file in the USB the slide show will not play amp If a folder name is too long the folder cannot be selected amp Each USB you use is assigned
63. ign DVI Devices to HDMI1 DVI in Edit Name Information You can see detailed information about the channel on TV or the selected external device Refresh If the external devices are not displayed in the Source list open the Tools menu and then select Refresh and then search for the connected devices English 26 Basic Features Correct posture to use the product Use the product in the correct posture as follows Straighten your back Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to your upper arms and level with the back of your hands Keep your elbows at about a right angle Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart English 27 Basic Features Picture Mode Menu Picture Picture Mode Picture modes apply preset adjustments to the picture e Dynamic Suitable for a bright room e Standard Suitable for a normal environment e Movie Suitable for watching movies in a dark room e Entertain Sharpens the picture Suitable for games amp It is only available when connecting a PC English 28 Basic Features Adjusting Picture Settings Backlight Menu Picture
64. ing a liquid container such as a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire AN Caution Displaying a still image for a long Z time may create a persistent image zZ ee or stain on the screen na aay e lf you do not use the product Ss for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Watching the product from too close a distance continuously may damage your eyesight It is important to give your eyes some rest 5 minutes every hour when viewing the product screen KO for long periods of time Keep the small accessories in a location out of the reach of children English 9 Do not press down hard on the product The product may become deformed or damaged When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and resul
65. ion Hy with just the cloth use a soft damp NS i i i pa cloth with a monitor exclusive N cleansing agent and wipe the Before cleaning the product unplug the power cord e Otherwise it may result in electric shock or fire Avoid spraying cleansing agent directly onto the product e This may result in A discolouration or cracking of S55 the exterior of the product or the panel coming off If you can t get the product clean aoe product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related Since a high voltage runs through the product never disassemble repair or modify the product yourself e Otherwise it may result in fire or electric shock e If the product needs to be fixed contact a service centre English 7 When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product When cleaning the product disconnect the power cord and clean the product with the cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito coil fragrance lubrication or cleansing agent when cleaning the product T
66. lug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Getting Started AN Caution Avoid unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Installation Related Avoid placing burning candles mosquito coil cigarettes on the product e Otherwise it may result in fire Avoid installing the product in a badly ventilated location such as inside a bookshelf or closet e Otherwise it may result in fire due to internal over heating Avoid installing the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e f you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire English 5 Make sure to use only the power cord supplied by our company In addition do not use the power cord of another electric appliance e Other
67. n View feature to reduce any static and ghosting that may appear on the screen Sy When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength amp Only available for analogue channels amp When bar is green you are receiving the best possible signal e MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality e HDMI Black Level Low Normal Selects the black level on the screen to adjust the screen depth So Available only in HDMI mode RGB signals e Film Mode Off Auto1 Auto2 Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in TV mode HDMI 1080i EXT amp If the screen does not seem natural change its option to Off Auto1 Auto2 in Film Mode e LED Clear Motion Removes drag from fast scenes with a lot of movement to provide a clear picture Sa The screen may become slightly darker when you play LED Clear Motion Basic Features Picture Off Menu Picture Picture Off Turns off the screen and plays audio only To turn the screen back on press any button except Power and Volume buttons on your remote Reset Picture Menu Picture Reset Picture Resets your current picture mode to its default settings Changing the Preset Sound Mode Sound Mode M
68. n icons indicate the following A An analogue channel O A favourites channel L A locked channel Change Channels Select a channel to jump to it right away To quickly scroll through the list use the channel up down buttons The focus moves up and down the list in one page Sorting digital channels only On the Channel list screen press 4 button you can use sorting function Change the list ordered by name or number English 41 Basic Features Change the Broadcast Signal Press gt button on the remote and select a broadcasting signal This will change the signal source immediately Change the Channel List Press gt button on the remote and switch to the Favourites list However the Favourites list can only be selected if it contains at least one favourites channel If no favourites channel was previously added select Edit Favourites and add channels from the Edit Favourites screen You can also change the antenna to Terrestrial or Cable You can choose your channel source from All TV or Analogue Guide Menu Broadcasting Guide View each digital channel s programming schedule including showtimes Check the programming schedules and even setup a Schedule Viewing Press Guide to launch the guide Make sure that the date and time is set properly under the System gt Time gt Clock menu Using Channel View Quick Nav Press EY button A popup window will open Each press of 4 or gt
69. ng considerations Temperature 20 C 45 C Storage tose a Humidity 5 95 Yo non condensing Tilt TE390 2 2 0 15 2 0 Model Name T22E390EW T22E390EX Screen Size Diagonal 21 5 inches 54 cm Display Resolution 1920 X 1080 60Hz Sound Output 5Wx2 Dimensions With stand 519 1 x 392 5 x 167 5 mm WxHxD Body 519 1 x 327 7 x 49 6 mm With stand 3 98 kg Weight Body 3 54 kg Model Name T24E390EW T24E390EX Screen Size Diagonal 23 6 inches 59 cm Display Resolution 1920 X 1080 60Hz Sound Output 5Wx2 Dimensions With stand 548 3 x 411 7 x 181 9 mm WxHxD Body 548 3 x 333 3 x 40 6 mm a With stand 4 21 kg Weight Body 3 60 kg amp Design and specifications are subject to change without prior notice amp For information about power supply and more about power consumption refer to the label attached to the product amp Some models may not be available for purchase depending on the region amp If there is no power cut off switch the power consumption is O only when the power cord is disconnected amp DPM Display Power Management Function does not work if you used in conjunction with the HDMI IN 1 DVI port of this product English 87 Other Information A Advanced Settings Aerial Anti theft Kensington Lock Anynet HDMI CEC Audio Format Auto Power Off Auto Tuning Auto Volume B Backlight Black Tone Brightness Change PIN Channel List Colour Colour Spac
70. ngs amp Depending on your version of Windows and your video card the procedure on your PC will probably differ slightly from the procedure presented here amp However the same basic information will apply in most cases If not contact your computer manufacturer or Samsung Dealer Click Control Panel on the Windows start menu Click Appearance and Themes in the Control Panel window A display dialog box appears Click Display Another display dialog box appears P SN F Click the Settings tab on the display dialog box On the Settings tab set the correct resolution screen size The optimal resolution for this product is 1920 x 1080 lf avertical frequency option exists on your display settings dialog box select 60 or 60 Hz Otherwise just click OK and exit the dialog box English 32 Basic Features PIP Menu Picture PIP View two sources on the TV at the same time e PIP Activate or deactivate the PIP function e Source Changes the source e Aerial Choose between Terrestrial or Cable e Channel Select the channel for the sub picture screen e Size Lim Cul The sub picture size can be set by three modes e Position Lal F LD Select a position for the sub picture screen e Sound Select You can choose to listen to the sound from the main picture or the sub picture amp If
71. ns Safety Precautions ccccesecceeeeeeeeeeeeeteeeeeteeees 4 Providing Proper Ventilation for Your Product 11 Accessories and Cables nananana na wawawanaaasans 12 Using the Control Panel s e How to Navigate Menus 17 Connecting the Power Cord and the Aerial or Cable CONNEC LION Llana 18 Connections Basic Features Connecting to AV Devices Blu ray Players DVD Players CIC naagapan added 19 Connecting to Audio Devices ceceeeteetseeeeees 22 Connecting to a PC maana anakan 23 Connecting to a COMMON INTERFACE slot Your product viewing Card Slot Ll mmnananananananaansnanawawana 24 Changing the Input Source secere 26 Using the INFO button Now amp Next guide 41 Using the Channel Menu ccesssssseeeesseeeees 41 Other Features ananannanananannwawawanawanaananawawawawasana 47 Preference Features S tting the TIME una ka NIN aba ane 50 Economical SOIUTIONS namumunga Nai 52 Blocking Programes reres uianes 53 Other Pears isisisi 54 SUPPO MENU anasanat 56 Advanced Features ADDIICATIOMS AA aa naa 59 Video Playback sisasssicctcasetictentdtansitiniendetenns 61 Photo PAYBACK mania anne 63 Music playback si amanaapamanan igan inin 65 Anynet HDMI CEC ccccccssccsssesssssssssssenesseees 66 Other Information e Correct posture to use the product 27 TOUBIESNOO NG iiini 99 Changing the Preset Picture Mode ana 28 e Supported Subtitle and Medi
72. omatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Ka To use the volume control of a connected source device set Auto Volume to Off A change to the volume control of the connected source device may not be applied if Auto Volume is set to Normal or Night e TV Installation Type Specify the TV s installation type Choose between Wall Mount and Stand to optimise the TV s sound automatically Additional Settings digital channels only e DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level amp According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OcB amp To increase or decrease the volume adjust between the range O and 10 respectively e Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound amp Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Reset Sound Menu So
73. ome countries and regions check with your authorised dealer e f you have any problems please contact a service provider e Insert the Cl or Cl CARD that supports the current aerial settings The screen will be distorted or will not be seen English 24 Connections Display Modes D Sub and HDMI DVI Input The optimal PC display resolution for this product is 1920 x 1080 60 Hz We very strongly recommend you set the video output of your computer to the optimal resolution You can also select one of the standard resolutions listed in the table below and the product will be automatically adjust to the resolution you choose If you set your computer s video output to a resolution not listed in the table the product screen may go blank and only the power indicator will turn on To resolve this issue adjust the resolution according to the following table referring to the user guide for the graphics card e Optimal resolution 1920 x 1080 pixels Display Mode Horizontal Vertical Pixel Clock Sync Polarity Mode Resolution Frequency KHz Frequency Hz MHz H V IBM 720 x 400 70Hz 31 469 70 087 28 322 VESA DMT 640 x 480 60Hz 31 469 59 940 25 175 MAC 640 x 480 67Hz 35 000 66 667 30 240 VESA DMT 640 x 480 72Hz 37 861 72 809 31 500 VESA DMT 640 x 480 75Hz 37 500 75 000 31 500 VESA DMT 800 x 600 60Hz 37 879 60 317 40 000
74. ore using the adaptor e Otherwise it may result in fire Be careful that adaptor should not be in contact with water and therefore not be wet e This may cause a malfunction electric shock or fire Do not use adaptor by the waterside or outside particularly when it rains or snows Be careful that adaptor should not be wet while cleaning floor with water English 10 When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery Keep power adaptor away from any other heat source e Otherwise it may result in fire Do not let water enter the DC power device or get the device wet e An electric shock or fire may result e Avoid using the product outdoors where it can be exposed to rain or snow e Be careful not to get the DC power a
75. powered on Be sure to select the correct input source Reboot the connected device by unplugging it and then reconnecting the device s power cable The remote control does not work Replace the remote control batteries Make sure the batteries are installed with their poles in the correct direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the product from 5 6 feet away English 74 Other Information Issues Solutions and Explanations The cable set top box remote control doesn t turn the product on or off or adjust the volume Programme the Cable Set remote control to operate the product Refer to the Cable Set Top Box user manual for the SAMSUNG product code Anynet HDMI CEC Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only You can connect only one receiver home theatre Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the product remote control is in product mode Check whether the remote control is Anynet compatible Anynet doesn t work in certain situations Searching channels operating Setup etc If you have removed and then reconnected the HDMI cable please make sure to search de
76. r slanted wall it may fall and result in severe personal injury amp NOTE e Standard dimensions for wall mount kits are shown in the table below e When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided e Do not use screws that do not comply with the VESA standard screw specifications e Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set e For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications e Do not fasten the screws that are too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions e Do not mount the TV at more than a 15 degree tilt Product Family inches VESA Spec A B Standard Screw Quantity 21 5 TE390 236 75x75 M4 4 A Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock English 83 Other Information A Kensington Lock is a devi
77. rious fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education teleconferencing digital libraries and network games English 48 Basic Features Common Interface Menu Broadcasting s Common Interface e CI Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu Cl Card e CAM video transcoding You can configure the setting to transcode the video codec from the CAM automatically Turn it Off if you do not want to use it amp You must use a CAM that supports transcoding the video codec e Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off 1 Purchase a Cl CAM module at your nearest dealer or by phone 2 Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow 3 Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot 4 Check if you can see a picture on a scrambled signal channel English 49 Preference Features Time Menu System Time amp The time you set will appear when you press the INFO button e Clock Set the clock to use the various timer features of the product amp If you disconnect the power cord you have to set the clock again Clock Mode Se
78. rticles when you look closely at the edge of the frame of the product This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is available when you are using a TV PC AV Component HDMI1 DVI EXT or HDMI2 source POP product s internal banner ad appears on the screen Select Home Use under Setup mode For details refer to the Setup Feature amp Watch these troubleshooting on video at www samsung com amp Some functions and pictures shown in this manual are available on specific models only amp To keep your product in optimum condition upgrade to the latest firmware on the Samsung web site by USB samsung com Support Downloads The product won t turn on Make sure the AC power cord is securely plugged in to the wall outlet and the product Make sure the wall outlet is working Try pressing the button on the product to make sure the problem is not the remote If the product turns on refer to Remote control does not work below There is no picture video Check the cable connections Remove and reconnect all cables connected to the product and external devices Set the video outputs of your external devices Cable Sat Box DVD Blu ray etc to match the product s input connections For example if an external device s output is HDMI it should be connected to an HDMI input on the product Make sure your connected devices are
79. rts Select a part to zoom it in Press this button again to resume When the Sports Mode is On the picture and sound modes are set to Stadium automatically amp If you turn the TV off while watching Sports Mode the Sports Mode will be disable amp Zoom doesn t operate in the following modes PIP On Media play videos Anynet HDMI CEC Digital Text UK Only English 65 Advanced Features Menu System Anynet HDMI CEC Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it amp You can only control Anynet devices using the TV s remote control not the buttons on the product amp The product remote control may not work under certain conditions If this occurs reselect the Anynet device amp The Anynet functions do not operate with other manufacturers products amp For instructions explaining how to connect Anynet external devices refer to the device s user manual You must connect an Anynet device using an HDMI cable Some HDMI cables may not support Anynet functions Sa Anynet works when the AV device supporting Anynet is in the standby or on status Sa Anynet supports up to 12 AV devices in total Note that you can connect up to 3 d
80. s its contrast and so on There are also functions that let you control the product s sound channel configuration energy use and a host of other features To access the main on screen menu press the MENU button on your remote To access Tools menus press the TOOLS 1 button Tools menus are available when the TOOLS 4 menu Icon is displayed on the screen MENUM button Displays the main on screen menu TOOLS H button Displays the Tools menus when available G and Direction buttons Use the Direction buttons to move the cursor and highlight an item Use the C button to select an item or confirm the setting RETURN button Returns to the previous menu EXIT button Exits the on screen menu How to Operate the Main Menu OSD On Screen Display The access steps may differ depending on the menu option you select 1 MENUDO The main menu options appear on the screen Picture Sound Broadcasting Applications System Support 2 a v Select a main menu option on the left side of the screen with the amp or V button 3 tc Press C to access the sub menus 4 a v Select the desired sub menu with the amp or Y button a V 4 b Adjust the value of an item with the 4 gt a or Y button The adjustment in the 5 OSD may differ depending on the selected menu 6 iz Press C to confirm the selection 7 EXIT ig Press EXIT 1f English 17 Getting Started Connecting the Power Cord and the Aerial or Cable Connection
81. sed your new PIN Channel Lock Menu Broadcasting Channel Lock The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Lock channels in Channel menu to prevent unauthorise users such as children from watching unsuitable programme amp Available only when the Source is set to TV English 53 Preference Features Menu Language Menu System Menu Language Set the menu language General Menu System General e Max Power Saving When the product is attached to a PC conserves power by turning the product off when the PC is not used for period of time you specify amp Available only when the Source is set to PC e Game Mode When you have connected a game console such as a PlayStation or Xbox to the product you can enjoy a more realistic gaming experience if you set the Game Mode on Precautions and limitations for Game Mode Before disconnecting a game console and connecting another external device set Game Mode to Off If you display the product menu in Game Mode the screen shakes slightly amp Game Mode is not available when the input source is set to TV or PC source amp Set Game Mode to On only after connecting a game console If you turn Game Mode on before you have attached the game console you may notice reduced picture quality amp If the Game Mode is set to On Picture Mode is set to Standard and Sound Mode is set to Movie automatic
82. t in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product Take care when adjusting the angle of the product or the height of the stand e f your hand or finger is caught you may be injured e Ifthe product is tilted excessively the product may fall and this may result in injury Getting Started Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Be careful that children do not place the batteries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries together e This may cause a battery to break or leak and may cause fire injury or contamination damage Do not place the adapter on top of another adapter e Otherwise it may result in fire Remove the vinyl cover of the adapter bef
83. t the current time manually or automatically Auto The product sets the current time automatically using the time from a digital channel amp You must have the cable or an aerial connected to the product to set the time automatically amp Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Manual Set the current time manually Clock Set Set the Date and Time manually You can set the current date and time using your remote amp Available only when the Clock Mode is set to Manual Time Zone Select your time zone amp This function is only available when the Clock Mode is set to Auto GMT Selects your time zone When Country is set to Others you can use this function DST Switches the DST Daylight Saving Time function on or off amp This function is only available when the Clock Mode is set to Auto e Sleep Timer Automatically shuts off the product after a preset period of time 30 60 90 120 150 or 180 minutes amp Select a period of time using your remote To cancel the Sleep Timer select Off English 50 Preference Features e On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing You can set up three separate On Timer configurations On Timer 1 On Timer 2 On Timer 3 and select the source of the content the product plays when it turns on an aerial or cable channel a USB dev
84. ta loss e The HDD Hard Disk Drive connected to USB is not supported e Do not disconnect the USB device while it is loading e The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360 x 8640 pixels e For unsupported or corrupted files the Not Supported File Format message is displayed e The scene search and thumbnail functions are not supported in the Videos e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e AUSB device that requires high power more than 500mA or 5V may not be supported e f the TV has been no input during time set in Auto Protection Time the screen saver will run e f a USB extension cable is used the USB device may not be recognised or the files on the device may not be read e f a USB device connected to the TV is not recognised the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection English 59 Advanced Features If a file deleted from the PC is still foun
85. th the product due to damage to the cable Take care not to block the vent by a table cloth or curtain o o e Otherwise it may result in fire due to internal overheating English 8 Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e fa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or aerial cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or substances enters the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire Getting Started Avoid plac
86. the channel list e Analogue Channel Tuning Scans for a analogue channel 1 Select the New 2 Set the Programme Colour System Sound System Channel and Search 3 Select the Store When scanning has finished a channel is updated in the channel list Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode e C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel English 40 Basic Features The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll 4 gt to view information for a desired programme while watching the current channel e Scroll a Y to view information for other channels If you want to move to the currently selected channel select C using your remote Using the Channel Menu Channel List Menu Broadcasting Channel List Press CH LIST button while viewing TV to display a list you can use to jump between channels The list also displays the programme info favourites channels and the Schedule Viewing and Schedule Recording programmes The Channel List scree
87. the product is connected to a cable box try to reset the box Disconnect and then reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p Sound First perform the Sound Test to determine if your product audio is operating properly Go to Menu gt Support Self Diagnosis Sound Test If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your product The picture is good but there is no sound f you are using an external device check the device s audio output option Ex You may need to change your cable box s audio option to HDMI if you have the box connected to your product using an HDMI cable f you are using a DVI to HDMI cable a separate audio cable is required f your product has a headphone jack make sure there is nothing plugged into it Reboot the connected device by disconnecting and then reconnecting device s power cable The speakers are making an inappropriate noise Check cable connections Make sure a video cable is not connected to an audio input For aerial or cable connections check the signal information A low signal level may cause sound distortion Perform the Sound Test feature Menu Support Self
88. the secondary audio language e Audio Format Digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the product Speaker function amp Audio Format option may differ depending on the broadcast e Audio Description Not available in all locations Digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster amp Audio Description Off On Turn the audio description function on or off Sy Volume Adjust the audio description volume Teletext Language Menu Broadcasting Teletext Language Set a desired language for teletext amp English is the default in cases where the selected language is unavailable in the broadcast Digital Text UK only Menu Broadcasting Digital Text If the programme broadcasts with digital text this feature is enabled amp MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to va
89. then select Sound Mode Select a sound mode Information Select the Settings on screen button and then select Information to view detailed information about the current video Subtitle Settings Select the Settings on screen button and then select Subtitle Settings to play the video with subtitles This function only works if the subtitles are the same file name as the video Audio Language Select the Settings on screen button and then select Audio Language to change the audio language if the video has more than one language English 62 Advanced Features MEDIA P Photos Select a photo from the list to display it on the screen Press 4 or TOOLS g_ to bring up the on screen buttons and RETURND to hide them To stop playing the file press m or RETURN Slide Show e From the Options list located at the top of the screen select Slide Show You can view all photos in the list as a slideshow e Press r from the list e Press gt or select the Start Slide Show on screen button to begin the slideshow Slideshow Settings e Slide Show Speed Press or select the Slide Show Settings on screen button and then select Speed e Slide Show Effect Select the Slide Show Settings on screen button and then select Effects Playlist Creation From the Options list located at the top of the screen select Play Selected specify all the photos you want to play and then select Play This creates a playlist If the list is
90. tion Auto Power Off English 69 Other Information Issues Solutions and Explanations Trouble Powering On Cannot Find a Channel Before you turn the product on find the blue light in the bottom of the right position product Press the power on button on the product or remote and the light should blink about 5 times before the product turns on If you find that you are having trouble powering on your Samsung television there are a number of things to check before making a call to the service department e f you happen to be using the product as a monitor and the stand by light only blinks for a few seconds when you press the power button your PC is in sleep mode To take your PC out of sleep mode press a key on your keyboard or move the mouse Then try turning your product on If you re sure your power cord remote control and PC are functioning properly you may be having a cable issue If you have a cable or satellite box your product may appear to be off because the cable or satellite box is not outputting a signal To test the signal output of your cable or satellite box press the guide or info button on the cable or satellite box remote control If the screen displays the guide or info data the problem is caused by the box Re run Setup Go to Menu System Setup or run Auto Tuning Go to Menu gt Broadcasting Auto Tuning English 70 Other Information Issues Solutions and
91. und Reset Sound Reset all sound settings to the factory defaults Selecting the Sound Mode aa When you set to Dual III the current sound mode is displayed on the screen Audio Type Dual I I Default A2 Stereo Mono Mono Automatic change Stereo Stereo Mono Dual Dual I Dual I Dual I NICAM Stereo Mono Mono Automatic change Stereo Mono Stereo Mono Dual I Dual R Dual I v Dual I amp If the Stereo signal is weak and an automatic switching occurs then switch to the Mono amp Only activated in stereo sound signal amp Only available when the input Source is set to TV English 38 Basic Features Aerial Menu Broadcasting Aerial Before your product can memorised the available channels you must select your Product signal source Terrestrial using an aerial or Cable Select Terrestrial or Cable After you have selected the signal source go on to the Auto Tuning function amp Selecting the signal source using the Aerial function also determines the signal source the product is tuned to For example if you receive your product signal over the aerial and you select Cable you will see only snow You must select Terrestrial to see a picture Auto Tuning Menu Broadcasting Auto Tuning Automatically scans and indexes all channels received through the TV s aerial input connector To start navigate to Broadcasting and select Auto Tuning Select Siart
92. usic Select the music file from the list or press gt to play music Use the remote control or the on screen buttons to control the video playback To stop playing the file press m or RETURN S Playlist Creation From the Options list located at the top of the screen select Play Selected specify all the music files you want to play and then select Play This creates a playlist If the list is displayed in Folder view mode only the files contained in the current folder can be selected To select files from other folders change the view mode Music Scanning e Press gt This scans through the file in 10 second increments e Press ir This pauses the currently playing music file Opening a Different File e Select the I lt lt gt gt on screen button e Select a file from the playlist Additional Music Playback Settings e Shuffle Select the On on screen button Choose between normal and random play e Repeat Select the Repeat on screen button This changes the repeat mode One Song repeats the current file only whereas All repeats all files contained in the playlist e Sound Mode Select the Sound Mode on screen button Select a sound mode e Information Press INFO from the playlist to view detailed information for the selected file Sports Mode Menu Applications s Sports Mode This mode provides optimized condition for watching sports games Zoom Pause playback and divide the picture into 9 pa
93. using your remote and then select Anynet HDMI CEC Select a device and then wait until the switch to the selected device is completed amp The menu appears only when you set Anynet HDMI CEC to On in the System menu amp Switching to the selected device may take up to 2 minutes You cannot cancel the switching operation while switching is in progress amp If you have selected an Anynet device using the Source function you cannot use the Anynet function Make sure to switch to an Anynet device English 68 Other Information If the product seems to have a problem first review this list of possible problems and solution If none of the troubleshooting tips apply visit www samsung com Issues Solutions and Explanations Flickering and Dimming If your Samsung Television is flickering or dimming sporadically you may need to disable some of its energy efficient features such as the Energy Saving feature Follow the steps below with your remote to turn these features off or on e Energy Saving Menu System Eco Solution Energy Saving Component Connections If you find that the colour on your Samsung television s screen is not correct or black Screen Colour and white first run a Self Diagnosis on the product to make sure there are no device issues e Self Diagnosis Menu Support Self Diagnosis Picture Test If the problem does not appear in the Picture test make sure e Your connections are
94. vices again or turn your product off and on again want to start Anynet Check if the Anynet device is properly connected to the product and check if the Anynet HDMI CEC is set to On System Anynet HDMI CEC Open the Tools menu using your remote and then select Anynet HDMI CEC Then select a menu you want want to exit Anynet Select View TV in the Anynet menu Go to Source screen using your remote and select a non Anynet device The message Connecting to Anynet device appears on the screen You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control after the product has completed Anynet configuration or has finished switching to Anynet English 75 Other Information Issues Solutions and Explanations The Anynet device does not You cannot use the play function when Setup is in progress play The connected device is not Check whether or not the device supports Anynet functions Geely Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On System Anynet HDMI CEC Search Anynet devices again Anynet requires an HDMI connection Make sure the device is connected to your product with an HDMI cable Some HDMI cables may not support Anynet functions If the connection is terminated because there has been a power failure or the HDMI cable
95. w as shown in the figure to separate it 0 4 1NF I O a0 N P4 Na Wall Desktop Stand Mount Wall mount kit desktop stand not supplied English 81 Other Information A Caution Important For the installation of Wall mount please don t use screws longer than 10 mm L10 of longitude 4 Align wall mount desktop stand to the product and firmly fix the wall mount desktop stand by fastening the screw 5 Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw English 82 Other Information Installing the Wall Mount Kit The wall mount kit Sold separately allows you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount Contact a technician for assistance when installing the wall mount bracket We do not advice you to do it yourself Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling o
96. warranty 4 This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any country other than the one for which the product was originally designed and manufactured 5 This warranty covers none of the following a Periodic check ups maintenance and repair or replacement of parts due to normal wear and tear b Cost relating to transport removal or installation of the product c Misuse including the faiure to use this product for its normal purposes or incorrect installation d Damage caused by Lightning Water Fire Acts of God War Public Disturbances incorrect mains voltage improper ventilation or any other cause beyond the control of Samsung e Spillage of food or liquid or use of any other hazardous substances which may effect the product f Performance due to differences in broadcasting method between countries 6 This warranty is valid for any person who legally acquired possession of the product during the warranty period 7 The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty Unless there is national legislation to the contrary the rights under this warranty are the consumers sole rights and Samsung its subsidiaries and distributors shall not be liable for indire
97. we recommend the Component connection over the A V connection amp When you connect a Video cable to COMPONENT AV IN the colour of the COMPONENT AV IN VIDEO jack green will not match the video cable yellow Using a Scart Cable Available devices DVD VCR _ Tm 4 3 CG f amp In Ext mode DTV Out supports MPEG SD Video and Audio only English 21 Connections Connecting to Audio Devices Using a Headphone Cable Connection Headphone Cable amp Headphones A You can connect your headphones to the headphone output jack on your product While the headphones are connected the sound from the built in speakers will be disabled e The sound function may be restricted when you connect headphones to the product e Headphone volume and product volume are adjusted separately The earphone jack supports only the 3 conductor tip ring sleeve TRS type English 22 Connections Using an HDMI Cable or an HDMI to DVI Cable or a D sub Cable Connection amp Your PC may not support an HDMI connection amp Use your PC speakers for audio D sub Cable PC OUT AUDIO OUT Stereo Cable HDMI Cable oi HDMI to DVI Cable me Stereo Cable AUDIO
98. wise it may result in electric shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep the plastic bags used to pack the product away from children e f children place the plastic bags over their heads they may suffocate Avoid installing the product in a location exposed to dust moisture sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Getting Started KP E Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fireplace or heater e This may shorten the product life cycle or cause fire Bend the outdoor aerial cable downwards at the location where it comes in the house so that rainwater does not flow in e f rainwater enters the product it may result in electric shock or fire Do not let the product drop while moving it e This may result in a problem with the product or injury When installing the product

Samsung T22E390EX User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents