Home

Samsung S24B420BW User Manual

Contents

1. Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not plug many products into the same power socket e Otherwise the socket may overheat and cause a fire Do not touch the power plug with wet hands e Otherwise an electric shock may result Insert the power plug all the way in so it is not loose e An unstable connection may cause a fire Ensure you connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result Do not bend or pull the power cord with force Do not weigh the power cord down with a heavy object e A damaged power cord may cause an electric shock or fire Do not place the power cord or product near heat sources e An electric shock or fire may result Remove foreign substances such as dust around the plug pins and power socket with a dry cloth e Otherwise a fire may result Before Using the Product A Caution NG Do not unplug the power cord when the product is in use e The product may become damaged by an electric shock Do not use the power cord for products other than authorized products supplied by Samsung An electric shock or fire may result Keep the power socket where the power cord is connected unobstructed e If any problem occurs in the product unplug the power cable to completely
2. 1 Preparations 19 Preparations Icons Description Use this button to control the brightness and contrast of the screen Confirm a menu selection Pressing the R C button when the OSD menu is not displayed will change the input source Analog DVI If you power on the product or change the input source by pressing the R C button a message that shows the changed input source will appear at the top left corner of the screen AUTO Press the AUTO button to automatically adjust the screen settings K e Changing the resolution in Display Properties will activate the Auto Adjustment function e This function is only available in Analog mode Turn the screen on or off Key Guide When a control button on the product is pressed the Key Guide will be displayed before the onscreen menu opens The guide shows the function of the button pressed To access the onscreen menu when the guide is displayed press the corresponding button again The Key Guide may vary depending on the function or product model Refer to the actual product 1 Preparations FIT Preparations 1 2 2 Reverse Side The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Description Connect the power cord for your monitor to the POWER port on the back of the product Connect to a PC usin
3. 40 Fine 40 Adjusting Fine CONFIGURING TINT 41 Red 41 Configuring Red 42 Green 42 Configuring Green 43 Blue 43 Configuring Blue 44 Color Tone 44 Configuring the Color Tone Settings 45 Gamma 45 Configuring Gamma Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET INFORMATION MENU AND OTHERS 48 48 49 49 50 50 51 51 52 52 53 53 54 54 55 55 56 56 57 5r 58 59 Language Changing the Language Menu H Position amp Menu V Position Configuring Menu H Position amp Menu V Position Display Time Configuring Display Time Transparency Changing Transparency Reset Initializing Settings Reset Eco Saving Configuring Eco Saving Off Timer Configuring Off Timer Turn Off After Configuring Turn Off After PC AV Mode Configuring PC AV Mode Key Repeat Time Configuring Key Repeat Time Source Detection Configuring Source Detection Customized Key Configuring Customized Key INFORMATION Displaying INFORMATION Configuring Brightness and Contrast in the Initial Screen Table Of Contents INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 60 60 60 61 62 62 63 64 64 66 67 67 67 67 70 74 75 83 83 83 83 84 84 85 Magic Tune What is MagicTune Installing the Software Removing the Software MultiScreen Installing the Software Removing the Software
4. BELGIUM 02 201 24 18 http www samsung com be Dutch http www samsung com be_fr French BOSNIA 051 331 999 http www samsung com BULGARIA 07001 33 11 share cost tariff http www samsung com bg CROATIA 062 SAMSUNG 062 726 786 http www samsung com hr CYPRUS 8009 4000 only from landline http www samsung com gr Appendix Appendix EUROPE CZECH 800 SAMSUNG 800 7267 86 http www samsung com Samsung Electronics Czech and Slovak s r o V Parku 2343 24 148 00 Praha 4 DENMARK 70 70 19 70 http www samsung com EIRE 0818 717100 http www samsung com ESTONIA 800 7267 http www samsung com ee FINLAND 030 6227 515 http www samsung com FRANCE 01 48 63 00 00 http www samsung com fr GERMANY 0180 6 SAMSUNG bzw http www samsung com 0180 6 7267864 0 20 Anruf aus dem dt Festnetz aus dem Mobilfunk max 0 60 Anruf GREECE 80111 SAMSUNG 80111 726 http www samsung com gr 7864 only from land line 30 210 6897691 from mobile and land line HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com hu ITALIA 800 SAMSUNG 726 7864 http www samsung com LATVIA 8000 7267 http www samsung com lv LITHUANIA 8 800 77777 http www samsung com t LUXEMBURG 261 03 710 http www samsung com MONTENEGRO 020 405 888 http www samsung com NETHERLANDS 0900 SAMSUNG http www samsung com 0900 7267864 0 10 Min NOR
5. Appearance and Personalization gt Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display gt Screen Resolution gt Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Go to Settings gt Control Panel gt Appearance and Personalization Display gt Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings 9 Troubleshooting Guide Troubleshooting Guide Question Answer How can change the resolution Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel gt Display gt Settings and adjust the resolution Windows Vista Go to Control Panel gt Appearance and Personalization Personalize Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Windows 8 Go to Settings Control Panel gt Appearance and Personalization Display Adjust Resolution and adjust the resolution How do set power saving mode Windows XP Set power saving mode in Control Panel gt Appearance and Themes Display Screen Saver Settings or BIOS SETUP on
6. PC mode Issues Solutions The screen keeps switching on and off Check the cable connection between the product and PC and ensure the connectors are locked Refer to 2 2 Connecting and Using a PC Troubleshooting Guide Screen issue Issues The power LED is off The screen will not switch on Solutions Check that the power cable is connected properly Refer to 2 2 Connecting and Using a PC The message Check Signal Cable appears Check that the cable is properly connected to the product Refer to 2 2 Connecting and Using a PC Check that the device connected to the product is powered on Not Optimum Mode is displayed This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table page 75 The images on the screen look distorted Check the cable connection to the product Refer to 2 2 Connecting and Using a PC The screen is not clear The screen is blurry Adjust Coarse and Fine Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky There are shadows or ghost images left on the screen Check that the resolution and frequency for the PC are within the ra
7. Russian UZBEKISTAN 8 10 800 500 55 500 http www samsung com ASIA PACIFIC AUSTRALIA 1300 362 603 http www samsung com au CHINA 400 810 5858 http www samsung com HONG KONG 852 3698 4698 http www samsung com hk Chinese http www samsung com hk_en English Appendix Fy Appendix ASIA PACIFIC INDIA 1800 3000 8282 http www samsung com in 1800 266 8282 INDONESIA 0800 112 8888 Toll Free http www samsung com id 021 56997777 JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com my NEW ZEALAND 0800 SAMSUNG 0800 726 786 http www samsung com nz PHILIPPINES 1 800 10 7267864 PLDT http www samsung com ph 1 800 8 7267864 Globe landline and Mobile 02 4222111 Other landline SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com sg TAIWAN 0800 32 9999 http www samsung com tw THAILAND 0 2689 3232 http www samsung com th 1800 29 3232 VIETNAM 1800 588 889 http www samsung com MENA ALGERIA 0800 100 100 http www samsung com n africa BAHRAIN 8000 4726 http www samsung com ae English http www samsung com ae_ar Arabic EGYPT 08000 726786 http www samsung com IRAN 021 8255 http www samsung com JORDAN 0800 22273 http www samsung com Levant 06 5777444 English KUWAIT 183 2255 183 CALL http www samsung com ae English http www samsung com ae_ar Arabic
8. The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode functions only when the product is connected to a PC that has a power saving function PowerSaver Pnordy Sta Power saving mode POWT oll Power Consumption 9 Power button Power Indicator On Blinking Off Typical Less than 0 1 Typical Less than 0 1 Power Consumption Typical 25 W Yp W yp W NG e The power consumption level can vary in different operating conditions or when settings are changed S B420B Model Power saving mode Power off Power button Typical Less than 0 1 W Analog Input Condition Max 0 25 W e ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard e To reduce the power consumption to O watts turn off the power switch on the back of the product or disconnect the power cable Be sure to disconnect the power cable when you will not be using the product for an extended period of time To reduce the power consumption to O watts when the power switch is not available disconnect the power cable 10 Specifications y Specifications 10 3 Standard Signal Mode Table A e This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Ther
9. Connection Using the DVI Cable A Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable 7 Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC 2 Press 13 3 to change the input source to DVI 2 2 2 Connecting the Power To use the product connect the power cable to a power outlet and the POWER port on the product A The input voltage is switched automatically Connecting and Using a Source Device 2 2 3 Driver Installation K You can set the optimum resolution and frequency for this product by installing the corresponding drivers e An installation driver is contained on the CD supplied with the product e Ifthe file provided is faulty visit the Samsung homepage http Awww samsung com and download the file Insert the user manual CD provided with the product into the CD ROM drive Click Windows Driver Follow the instructions given on the screen to proceed with installation KR N ra Select your product model from the list of models Select the display adapter on which you want to intall ve monitor RADEON 9550 Flug ond Play Monin Select the monitor which you weet to install 5 Goto Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Connecting
10. MagicRotation Installing the Software Removing the Software Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the following Q amp A General PowerSaver Standard Signal Mode Table Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service Cost to Customers Not a product defect A Product damage caused by customer s fault Others Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Terminology Table Of Contents INDEX Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association e An administration fee may be charged if either o a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual o b you bring the unit to a repair center and there is no defect in the product i e where you have failed to read this user manual e The amount of suc
11. Set the color temperature to be cooler than Normal mode Normal Display the standard color tone Warm 1 Set the color temperature to be warmer than Normal mode Warm 2 Set the color temperature to be warmer than Warm 1 Custom Customize the color tone 4 Press M V to move to the option you want and press 3 03 5 The selected option will be applied 4 Configuring Tint 44 4 5 Configuring Tint Gamma Adjust the mid range brightness Gamma of the picture 4 5 1 Configuring Gamma Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to COLOR and press 9 2 on the product S 3 Press A V to move to Gamma and press 7 c on the product The following screen will appear Model Mode2 Mode3 L lt Lv 4 NUO v v ve Mi y v 4 Press A V to move to the option you want and press 13 8 5 The selected option will be applied 4 Configuring Tint 45 5 1 Resizing or Relocating the Screen A detailed description of each function is provided Refer to your product for details Language Set the menu language K e Achange to the language setting will only be applied to the onscreen menu display e It will not be applied to other functions on your PC 5 1 1 Changing the Language Press any button on the front of the product to display the Key Guide Next press M
12. The MultiScreen installation may be affected by the Graphics card Motherboard and the Networking environment Operating System oS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista 32bit e Windows 7 32bit e Windows 8 32bit NG For MultiScreen the operating systems Windows 2000 or later is recommended Hardware e Atleast 32MB of memory e Atleast 60MB of free space on the hard disk drive Installing the Software 8 2 2 Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select MultiScreen from the program list and click the Add Delete button 8 3 Installing the Software MagicRotation O MagicRotation The MagicRotation Software from Samsung Electronics Inc provides the user with a rotation feature 0 90 180 270 orientation that facilitates the optimum utilization of computer display screen better viewing and improved user productivity 8 3 1 Installing the Software 7 Insert the installation CD into the CD ROM drive 2 Select the MagicRotation setup program NG If the pop up screen for the software installation does not appear on the main screen find and double click the MagicRotation setup file on the CD ROM 3 Select the installation language and click Next 4 Complete the remaining software installation steps according to the instructions displayed on the scr
13. and Using a Source Device 2 2 4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting The optimal resolution for this monitor is as follows Use the above settings to set the resolution on your PC pa English ZAU v a 4 L gt v v v v Press A V to move to the language you want and press 7 9 2 To hide the information message press MENU or 3 3 NG Ifthe optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again e _ The optimum resolution can also be selected in Control Panel on your PC 2 Connecting and Using a Source Device ET 3 1 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details Brightness You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear brighter K e This menu is not available when Ma GicBright is set to Dynamic Contrast mode e This menu is not available when Eco Saving is enabled 3 1 1 Configuring Brightness Press any button on the front of the product to display the Key Guide Next press MENU to display the corre
14. of these signals e _ This can only be set when the external input is connected through DVI and PC AV Mode is set to AV 4 Press M V to move to the option you want and press 5 0 5 The selected option will be applied 3 6 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural K It is best to set Response Time to Standard or Faster when you are not viewing a movie 3 6 1 Configuring Response Time Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to PICTURE and press I on the product 3 Press A V to move to Response Time and press 3 c on the product The following screen will appear Standard Faster Fastest KI Lv 4 AUTO J v v v v v y 4 Press 4 W to move to the option you want and press 0 0 5 The selected option will be applied 3 7 Screen Setup H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down IZ gt This menu is available in Analog mode a e This menu is only available when Image Size is set to Screen Fit in AV Mode When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels 3 7 1 Configuring H Position amp V
15. on the product The following screen will appear 4 gt AUTO v v v v v v 4 Adjust the Fine using the A W buttons 5 The selected option will be applied 3 Screen Setup 40 4 1 Configuring Tint Adjust the tint of the screen This menu is not available when X icBright is set to Cinema or Dynamic Contrast mode A detailed description of each function is provided Refer to your product for details Red Adjust the value of the color red in the picture Range 0 100 A higher value will increase the intensity of the color 4 1 1 Configuring Red Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to COLOR and press 9 2 on the product 3 Press A V to move to Red and press 3 c on the product The following screen will appear KI a AUTO O 4 Adjust the Red using the A W buttons 5 The selected option will be applied 4 Configuring Tint 4 4 2 Configuring Tint Green Adjust the value of the color green in the picture Range 0 100 A higher value will increase the intensity of the color 4 21 Configuring Green Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to COLOR and press 9 2 on the product 3 Press A V to move to Green and press Hc on t
16. on the product or apply impact e An electric shock or fire may result Do not move the product by pulling the power cord or any cable e Otherwise the cable may be damaged and product failure an electric shock or fire may result If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately e Sparks can cause an explosion or fire Do not lift or move the product by pulling the power cord or any cable e Otherwise the cable may be damaged and product failure an electric shock or fire may result Do not use or keep combustible spray or an inflammable substance near the product e An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e Otherwise a fire may result from an increased internal temperature Do not insert a metallic object a chopstick coin hair pin etc or inflammable object paper match etc into the vent or ports of the product e f water or any foreign substance enters the product be sure to power off the product remove the power cord and contact Samsung Customer Service Center page 77 e Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e If water or any foreign substance enters the product be sure to power off the product remove the power cord and contact Samsung Customer Service Center
17. rotate your monitor as shown below I WZ gt Be sure to fully extend the stand before rotating the monitor a e gt g lt e If you rotate the monitor without fully extending the stand the corner of the monitor may hit the floor and get damaged e Do not rotate the monitor counterclockwise The monitor may get damaged Preparations 1 3 4 Installing a Wall mount Kit or Desktop Stand Before Installation A Power the product off and remove the power cable from the power socket Place a protective cloth or Unfasten the screw from the Lift and detach the stand cushion on a flat surface Next back of the product place the product with the face down on top of the cloth or cushion Installing a Wall mount Kit or Desktop Stand Q Attach the wall mount kit or desktop stand here Bracket sold separately Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall mount kit or desktop stand you want to attach Preparations N Notes x lt Using a screw longer than the standard length can damage the internal components of the product The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications Do not use screws that do not comply with the VESA standards Do not attach the wall mou
18. separatly sold product unspecified by Samsung e repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co Ltd e remodeling or repairing the product by customer e using it with incorrect voltage or non authorised electrical connections e not following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc e If consumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc W4 If customer requests a service in case the product has no defect service fee may be charged So please read User Manual first Correct Disposal Appendix Correct Disposal of This Product Waste Electrical amp Electronic Equipment pa Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their lo
19. the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel gt Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 8 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize gt Screen Saver Settings or BIOS SETUP on the PC Refer to the user manual for your PC or graphics card for further instructions on adjustment 9 Troubleshooting Guide v Specifications 10 1 General Model Name S24B420BW Size 24 inches 61 cm 518 4 mm H x 324 0 mm V Panel Display area 20 4 inches H x 12 8 inches V Pixel Pitch 0 270 mm H x 0 270 mm V 0 011 inches H x 0 011 inches V Without 556 2 x 360 8 x 60 9 mm Stand 21 9 x 14 2 x 2 4 inches Dimensions Minimum 556 2 x 392 9 x 220 0 mm 5 3 kg WxHxD 21 9 x 15 5 x 8 7 inches 11 7 Ibs Meg With Stand Maximum 556 2 x 492 9 x 220 0 mm 5 3 kg 21 9x 19 4 x 8 7 inches 11 7 lbs VESA Mounting Interface 100 mm x 100 mm 3 9 inches x 3 9 Inches For use with Specialty Arm Mounting hardware A Plug and Play This monitor can be installed and used with a
20. to move to SETUP amp RESET and press t c on the product 3 Press A V to move to Turn Off After and press i c on the product The following screen will appear SETUP amp RESET KI a AUTO v v v v v v 4 Press A YW to configure Turn Off After 5 The selected option will be applied K For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU SETUP amp RESET and set Off Timer to Off 6 Setup and Reset 53 6 5 Setup and Reset PC AV Mode Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie K e This function does not support Analog mode e Supplied for the wide models only such as 16 9 or 16 10 e Ifthe monitor when set to DVI is in power saving mode or is displaying the message Check Signal Cable press the MENU button to display the On Screen Display OSD You can select PC or AV 6 5 1 Configuring PC AV Mode Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press M V to move to SETUP amp RESET and press t c on the product 3 Press M V to move to PC AV Mode and press C amp on the product SETUP amp RESET Reset Eco Saving Off Timer Turn Off After PC AV M
21. 0 VESA 1600 x 900RB 60 000 60 000 108 000 Ha VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 WA VESA 1920 x 1200 74 038 59 950 154 000 10 Specifications v Specifications R Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle The reciprocal number of a horizontal cycle is called horizontal frequency Horizontal frequency is measured in kHz Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures The repeat frequency is called vertical frequency or refresh rate and is indicated in Hz Appendix Contact SAMSUNG WORLD WIDE Wg Ifyou have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center NORTH AMERICA U S A 1 800 SAMSUNG 726 7864 http www samsung com us CANADA 1 800 SAMSUNG 726 7864 http www samsung com ca English http www samsung com ca_fr French LATIN AMERICA ARGENTINE 0800 333 3733 http www samsung com ar BOLIVIA 800 1 0 7260 http www samsung com BRAZIL 0800 124 421 Demais cidades e http www samsung com br regi es 4004 0000 Capitais e grandes centros CHILE 800 SAMSUNG 726 7864 http www samsung com cl COLOMBIA 01 8000 112 112 http www samsung com co Bogota 600 12
22. 3 93 inghes 110 cm 3 93 inches osa l 10cm 110 cm 3 93 1 3 93 inches l inches ie Pr 10 cm 3 93 inches De Precautions for storage A Be sure to contact Samsung Customer Service Center page 77 if the inside of the monitor needs cleaning Service fee will be charged Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product gt Symbols A Warning This symbol alerts you that important literature concerning operation and maintenance has been included with this product A serious or fatal injury may result if instructions are not followed A Caution Personal injury or damage to properties may result if instructions are not followed O Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Before Using the Product Electricity and Safety K The following images are for reference only Real life situations may differ from what is shown in the images A Warning
23. 350370 http www samsung com Appendix 82 Appendix Responsibility for the Pay Service Cost to Customers NG When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc fa service technician gives instructions on how to use product or simply adjusts options without disassembling product Ifa defect is caused by external environmental factors Internet Antenna Wired Signal etc e Ifa product is reinstalled or devices are connected additionally after installing the purchased product for the first time e Ifa product is reinstalled to move to a different spot or to move to a different house e If customer requests instructions on how to use because of another company s product e f customer requests instructions on how to use the network or another company s program e If customer requests software installation and setup for the product e If a service technician removes cleans dusts or foreign materials inside of the product e _ lf customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by e external impact or drop e use of supplies or
24. 72 COSTA RICA 0 800 507 7267 http www samsung com latin Spanish http www samsung com latin_en English DOMINICA 1 800 751 2676 http www samsung com latin Spanish http www samsung com latin_en English ECUADOR 1 800 10 7267 http www samsung com latin Spanish http www samsung com latin_en English EL SALVADOR 800 6225 http www samsung com atin Spanish http www samsung com latin_en English Appendix Appendix LATIN AMERICA GUATEMALA 1 800 299 0013 http www samsung com latin Spanish http www samsung com latin_en English HONDURAS 800 27919267 http www samsung com latin Spanish http www samsung com latin_en English JAMAICA 1 800 234 7267 http www samsung com NICARAGUA 001 800 5077267 http www samsung com latin Spanish http www samsung com latin_en English MEXICO 01 800 SAMSUNG 726 7864 http www samsung com PANAMA 800 7267 http www samsung com latin Spanish http www samsung com latin_en English PARAGUAY 009 800 542 0001 http www samsung com py PERU 0 800 777 08 http www samsung com pe PUERTO RICO 1 800 682 3180 http www samsung com TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com URUGUAY 000 405 437 33 http www samsung com VENEZUELA 0 800 100 5303 http www samsung com ve EUROPE AUSTRIA 0810 SAMSUNG http www samsung com 7267864 0 07 min
25. 8 RESET and press 17 3 on the product Press A V to move to Source Detection and press Z7 on the product The following screen will appear SETUP amp RESET Auto Manual KI y A 72 E Am v v v e Auto The input source is automatically recognized e Manual Manually select an input source v v v Press A W to move to the option you want and press T T The selected option will be applied 6 Setup and Reset 56 6 8 Setup and Reset Customized Key You can customize Customized Key as follows 6 8 1 Configuring Customized Key Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to SETUP amp RESET and press I on the product 3 Press A V to move to Customized Key and press 9 1 on the product The following screen will appear SETUP amp RESET MAGIC Bright Eco Saving Image Size 4 Lv A a BUKO v v v v v v MA amp cBright Eco Saving Image Size 4 Press 4 W to move to the option you want and press IQ 5 The selected option will be applied 6 Setup and Reset INFORMATION Menu and Others A detailed description of each function is provided Refer to your product for details 7A INFORMATION View the current input source frequency and resolution 7 1 1 Displaying INFORMATION Press any button on the front of the p
26. ENU to display the corresponding menu screen 2 Press A to move to MENU SETTINGS and press 0 0 on the product 3 Press A V to move to Language and press 17 C on the product The following screen will appear MENU SETTINGS Deutsch English Espa ol Frangais Italiano Magyar Polski Portugues lt AUTO v v v 4 Press A V to move to the language you want and press 5 0 5 The selected option will be applied 5 Resizing or Relocating the Screen KI 5 2 Resizing or Relocating the Screen Menu H Position amp Menu V Position Menu H Position Move the menu position to the left or right Menu V Position Move the menu position up or down 5 2 1 Configuring Menu H Position amp Menu V Position 7 Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to MENU SETTINGS and press 0 0 on the product 3 Press A V to move to Menu H Position or Menu V Position and press 3 C The following screen will appear MENU SETTINGS MENU SETTINGS lt n a a BO lt Tu TOO REN h ee rng v v 4 Press 4 W to configure Menu H Position or Menu V Position 5 The selected option will be applied 5 Resizing or Relocating the Screen 5 3 Resizing or Relocating the Screen Display Time Set the on screen display OSD menu to automatically disappear if th
27. MOROCCO 080 100 2255 http www samsung com OMAN 800 SAMSUNG 726 7864 http www samsung com ae English http www samsung com ae_ar Arabic Appendix 81 Appendix MENA PAKISTAN 0800 Samsung 72678 http Awww samsung com pk QATAR 800 2255 800 CALL http www samsung com ae English http www samsung com ae_ar Arabic SAUDI ARABIA 920021230 http www samsung com sa SYRIA 18252273 http www samsung com Levant English TUNISIA 80 1000 12 http www samsung com n_africa TURKEY 444 7711 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com AFRICA BOTSWANA 8007260000 http www samsung com BURUNDI 200 http www samsung com CAMEROON 7095 0077 http www samsung com africa_fr COTE D IVOIRE 8000 0077 http www samsung com africa_fr DRC 499999 http www samsung com GHANA 0800 10077 http www samsung com africa_en 0302 200077 KENYA 0800 545 545 http www samsung com NAMIBIA 08 197 267 864 http www samsung com NIGERIA 0800 726 7864 http www samsung com africa_en MOZAMBIQUE 847267864 827267864 http www samsung com RWANDA 9999 http www samsung com SENEGAL 800 00 0077 http www samsung com africa_fr SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com SUDAN 1969 http www samsung com TANZANIA 0685 88 99 00 http www samsung com UGANDA 0800 300 300 http www samsung com ZAMBIA 0211
28. Position Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to PICTURE and press Is on the product 3 Press 4 W to move to H Position or V Position and press 3 2 The following screen will appear KI AUTO z v o y 4 Press A to configure H Position or V Position 5 The selected option will be applied 3 8 Screen Setup Coarse Adjust the screen frequency K This menu is available in Analog mode only 3 8 1 Adjusting Coarse Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to PICTURE and press on the product 3 Press A W to move to Coarse and press 3 c on the product The following screen will appear lt ee ee a lt Boo yy v v v v 4 Adjust the Coarse using the A W buttons 5 The selected option will be applied 3 Screen Setup ET 3 9 Screen Setup Fine Fine adjust the screen to obtain a vivid picture K This menu is available in Analog mode only 3 9 1 Adjusting Fine Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to PICTURE and press 4 on the product 3 Press A W to move to Fine and press 9 amp
29. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance BN46 00232C 01 Table Of Contents BEFORE USING THE PRODUCT mg Copyright Icons used in this manual N Cleaning 8 9 Securing the Installation Space 9 Precautions for storage 0 1 Safety Precautions 10 Symbols 11 Electricity and Safety 12 Installation and Safety 14 Operation and Safety 17 Correct posture to use the product PREPARATIONS 18 Checking the Contents 18 Checking the Components 19 Parts 19 Frontal Buttons 21 Reverse Side 22 Installation 22 Attaching the Stand 23 Adjusting the Product Tilt and Height 23 Rotating the Monitor 24 Installing a Wall mount Kit or Desktop Stand 26 Anti theft Lock CONNECTING AND USING 27 Before Connecting A SOURCE DEVICE 27 Pre connection Checkpoints 27 Connecting and Using a PC 2 Connecting to a PC 28 Connecting the Power 29 Driver Installation 30 Setting Optimum Resolution Table Of Contents SCREEN SETUP s1 Brightness 31 Configuring Brightness 32 Contrast 32 Configuring Contrast 33 Sharpness 33 Configuring Sharpness 34 SAMSUNG MAGIC Bright 34 Configuring SAMSUNG MAGIC Bright 35 Image Size 35 Changing the Image Size 37 Response Time 37 Configuring Response Time 38 H Position amp V Position 38 Configuring H Position amp V Position 39 Coarse 39 Adjusting Coarse
30. WAY 815 56480 http www samsung com POLAND 0 801 172 678 http www samsung com pl lub 48 22 607 93 33 catkowity koszt potaczenia jak za 1 impuls wedtug taryfy operatora koszt po czenia wed ug taryfy operatora PORTUGAL 808 20 SAMSUNG 808 20 7267 http www samsung com ROMANIA 08008 SAMSUNG 08008 726 http www samsung com ro 7864 TOLL FREE No SERBIA 011 321 6899 http www samsung com rs Appendix Appendix EUROPE SLOVAKIA 0800 SAMSUNG 0800 726 786 http www samsung com SPAIN 902172678 http www samsung com SWEDEN 0771 726 7864 SAMSUNG http www samsung com SWITZERLAND 0848 SAMSUNG http www samsung com ch 7267864 CHF 0 08 min German http www samsung com ch_fr French U K 0330 SAMSUNG 7267864 http www samsung com CIS ARMENIA 0 800 05 555 http www samsung com AZERBAIJAN 088 55 55 555 http www samsung com BELARUS 810 800 500 55 500 http www samsung com GEORGIA 0 800 555 555 http www samsung com KAZAKHSTAN 8 10 800 500 55 500 http www samsung com GSM 7799 KYRGYZSTAN 00 800 500 55 500 http www samsung com MOLDOVA 0 800 614 40 http www samsung com MONGOLIA 7 800 555 55 55 http www samsung com RUSSIA 8 800 555 55 55 http www samsung com TADJIKISTAN 8 10 800 500 55 500 http www samsung com UKRAINE 0 800 502 000 http www samsung com ua Ukrainian http www samsung com ua_ru
31. cal government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Appendix Terminology OSD On Screen Display On screen display OSD allows you to configure on screen settings to optimize the picture quality as required It allows you to change the screen brightness tint size and many other settings using menus displayed on the screen Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Grey scale Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning ra
32. cut the power to the product Power to the product cannot be completely cut off with the power button Hold the plug when disconnecting the power cord from the power socket e An electric shock or fire may result Installation and Safety A Warning DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES e Otherwise a fire may result Avoid installing the product in a narrow space with bad ventilation such as a bookshelf or wall closet e Otherwise a fire may result due to an increased internal temperature Keep the plastic packaging bag for the product in a place that cannot be reached by children e Children may suffocate Before Using the Product dodo g e Br Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e The product may fall and break or cause a personal injury e Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e An electric shock or fire may result Do not expose the product to direct sunlight heat or a hot object such a
33. e menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear 5 3 1 Configuring Display Time Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to MENU SETTINGS and press O C on the product 3 Press A V to move to Display Time and press 3 C on the product The following screen will appear MENU SETTINGS 5 sec 10 sec 20 sec 200 sec Lv 4 AUTO v v v v v 4 Press 4 W to move to the option you want and press 3 c 5 The selected option will be applied 5 Resizing or Relocating the Screen 48 5 4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows 5 4 1 Changing Transparency Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to MENU SETTINGS and press 0 0 on the product 3 Press A V to move to Transparency and press 3 on the product The following screen will appear MENU SETTINGS 4 iv EY Alo O p v p v v v 4 Press 4 W to move to the option you want and press 3 5 The selected option will be applied 5 Resizing or Relocating the Screen 49 6 1 Setup and Reset A detailed description of each function is
34. e small accessories used with the product out of reach of children Before Using the Product 16 Before Using the Product Exercise caution when adjusting the product angle or stand height e Otherwise children s fingers or hands may become stuck and injured e Tilting the product excessively may cause it to fall and result in personal injury Do not place heavy objects on the product e Product failure or personal injure may result Correct posture to use the product Use the product in the correct posture as follows e Straighten your back Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen e Adjust the angle so light does not reflect on the screen e Keep your forearms perpendicular to your upper arms and level with the back of your hands e Keep your elbows at about a right angle e Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Preparations 1 1 Checking the Contents 1 1 1 Checking the Components We e Contact the dealer from whom you purchased the product if any item is missing EI e The appearance of the components and items sold separately may differ from the image shown Components SS gt Warranty card User manual optional Not available in
35. een NG e The software may not work properly if you do not restart the computer after the installation e The MagicRotation icon may not appear depending on the computer system and the product specifications Ifthe shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MagicRotation The installation of MagicRotation may be affected by the Graphics card Motherboard and the Networking environment Limitation 7 The Display Driver should be properly loaded for the MagicRotation to work properly The installed Display Driver should be the latest driver supplied by the vendor 2 If some applications like Windows Media Player Real Player etc are not displaying movie files properly in 90 180 and 270 orientations then do the following e Close the application e Select the Orientation 90 180 270 you want to view the application e Relaunch the application In most cases this should fix the problem Installing the Software 3 User Applications using OpenGL and DirectDraw 3D drawing will not function as per the orientation mode selected 90 180 270 e g 3D games 4 DOS based applications in Full Screen Mode will not function as per the orientation mode selected 90 180 270 5 Dualis not supported in Windows 98 ME NT 4 0 O MagicRotation does not provide support for 24 bits per pixel Bit depth Color Quality Ifyou are changing your Graph
36. efore a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that you select the optimum resolution specified for the screen size of your product e Check the frequency when you exchange a CDT monitor connected to a PC for an LCD monitor If the LCD monitor does not support 85Hz change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor Horizontal Frequency 30 81 kHz Synchronization Vertical Frequency 56 63 Hz Optimum Resolution 1920 x 1200 60 Hz Resolution Maximum Resolution 1920 x 1200 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual an Frequency Frequency Pixel Glock Sync Polarity KHz Hz MHz amg VESA 640 x 480 31 469 59 940 25 175 VESA 800 x 600 35 156 56 250 36 000 F VESA 800 x 600 37 879 60 317 40 000 4 4 VESA 1024 x 768 48 363 60 004 65 000 FI VESA 1280 x 720 45 000 60 000 74 250 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 4 4 VESA 1440 x 900 55 935 59 887 106 50
37. els horizontal frequency and 1 080 vertical lines vertical resolution Plug amp Play The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play Index A Appendix 77 B Before Connecting 27 Blue 43 Brightness 31 C Checking the Contents 18 Cleaning 8 Coarse 39 Color Tone 44 Connecting and Using a PC 27 Contact SAMSUNG WORLD WIDE 77 Contrast 32 Copyright 7 Correct Disposal 84 Correct posture to use the product 17 Customized Key 57 D Display Time 48 E Eco Saving 51 F Fine 40 G Gamma 45 General 72 Green 42 Image Size 35 INFORMATION 58 Installation 22 K Key Repeat Time 55 L Language 46 M MagicRotation 64 MultiScreen 62 O Off Timer 52 P Parts 19 PC AV Mode 54 Q Q amp A70 R Red 41 Requirements Before Contacting Samsung Customer Service Center 67 Reset 50 Response Time 37 Responsibility for the Pay Service Cost to Customers 83 nex ITA Index S Safety Precautions 10 SAMSUNG MAGIC Bright 34 Sharpness 33 Source Detection 56 Standard Signal Mode Table 75 T Transparency 49 Turn Off After 53
38. emove Programs icon in the Control Panel In the Add Remove window find and select MagicTune so that it is highlighted Click Change or Remove Programs to remove the software Select Yes to start removing MagicTune Wait until a message box appears informing you that the software has been removed completely We For technical support the FAQ frequently asked questions or information about the software upgrade for MagicTune please visit our website http www samsung com us consumer learningresources monitor magetune pop_intro html 8 2 Installing the Software MultiScreen im MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections 8 2 1 Installing the Software Insert the installation CD into the CD ROM drive 2 Select the MultiScreen setup program NG If the pop up screen for the software installation does not appear on the main screen find and double click the MultiScreen setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation LE The software may not work properly if you do not restart the computer after the installation e The MultiScreen icon may not appear depending on the computer system and the product specifications e Ifthe shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MultiScreen
39. g the D SUB cable Connect to a PC using the DVI cable The DVI IN terminal is supplied for the digital DVI dedicated models only 1 3 Preparations Installation 1 3 1 Attaching the Stand Place a protective cloth or Insert the stand base into the Do not remove the fixing pin until cushion on a flat surface Next stand in the direction of the you are finished attaching the place the product with the face arrow stand down on top of the cloth or cushion Fasten the screw tightly using a After installing the stand place You can remove the fixing pin screwdriver or coin into the the product upright and adjust the stand now bottom of the stand base Caution Do not hold the product upside down only by the stand WZ Disassembly is the reverse order of assembly e The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Preparations 1 3 2 Adjusting the Product Tilt and Height NG The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 0 5cm 0 2cm 9 5cm 0 2cm e To adjust the height remove the fixing pin e The monitor tilt and height can be adjusted e Hold the top center of the product and adjust the height carefully 1 3 3 Rotating the Monitor You can
40. h administration charge will be advised to you before any work or home visit is carried out Icons used in this manual The following images are for reference only Real life situations may differ from what is shown in the images Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning 1 Power off the monitor and computer 2 Disconnect the power cord from the monitor K Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the monitor screen using a clean soft and dry cloth e Donot apply a cleaning agent that contains alcohol solvent or surfactant to the monitor e Donot spray water or detergent directly on the product Ey ch ZR 4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor 5 Connect the power cord to the product after cleaning the product 6 Power on the monitor and computer Before Using the Product Securing the Installation Space e Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing the product NG The exterior may differ depending on the product ee Si 10 cm
41. he product The following screen will appear lt ee a a Baao ne i v v 4 Adjust the Green using the A V buttons 5 The selected option will be applied 4 Configuring Tint 42 4 3 Configuring Tint Blue Adjust the value of the color blue in the picture Range 0 100 A higher value will increase the intensity of the color 4 3 1 Configuring Blue Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to COLOR and press i c on the product 3 Press A V to move to Blue and press 13 8 on the product The following screen will appear La AUTO v v v y v v 4 Adjust the Blue using the A Y buttons 5 The selected option will be applied 4 Configuring Tint 43 4 4 Configuring Tint Color Tone Adjust the general color tone of the picture 4 4 1 Configuring the Color Tone Settings Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to COLOR and press 13 c on the product 3 Press A V to move to Color Tone and press H E on the product The following screen will appear Cool 2 Cool 1 Normal Warm 1 Warm 2 Custom La Lv 4 lt AUTO 28 h v v v Cool 2 Set the color temperature to be cooler than Cool 1 Cool 1
42. ic Card it is recommended that you uninstall the MagicRotation Software before doing so System Requirements oS e Windows 98 SE e Windows Me e Windows NT 4 0 e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista 32bit e Windows 7 32bit e Windows 8 32bit NG For MagicRotation Windows 2000 or later is recommended Hardware e Atleast 128MB of memory recommended e Atleast 25MB of free space on the hard disk drive Service Packs e Itis recommended that your System has the latest Service Pack installed e For Windows NT 4 0 it is recommended to install Internet Explorer 5 0 and above with Active Desktop component A e For more information refer to the website http www samsung com us consumer learningresources monitor magicrotation pop_download html e Windows is registered trademark of Microsoft Corporation Inc Installing the Software 8 3 2 Removing the Software You can only remove MagicRotation through Add or Remove Programs in Windows To remove MagicRotation complete the following steps 1 9 OA AR W N S in Click Start select Settings and select Control Panel from the menu For Windows XP click Start and select Control Panel from the menu Double click the Add or Remove Programs icon in the Control Panel In the Add Remove window find and select MagicRotation so that it is highlighted Cl
43. ick Change or Remove Programs to remove the software Select Yes to start removing MagicRotation Wait until a message box appears informing you that the software has been removed completely For technical support the FAQ frequently asked questions or information about the software upgrade for MagicRotation please visit our website http www samsung com us consumer learningresources monitor magicrotation pop_download htm 9 1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9 1 1 Testing the Product W4 Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test Power off both the PC and product Disconnect the cables from the product Power on the product KR N ra If the message Check Signal Cable appears the product is working normally NG If the screen remains blank check the PC system video controller and cable 9 1 2 Checking the Resolution and Frequency For a mode that exceeds the supported resolution refer to 10 3 Standard Signal Mode Table the message Not Optimum Mode will appear for a short time 9 1 3 Check the following Installation issue
44. nge of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode Table page 75 in this manual and the INFORMATION menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen color is inconsistent Change the COLOR settings The colors on the screen have a shadow and are distorted Change the COLOR settings White does not really look white Change the COLOR settings There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is operating in power saving mode Press any key on the keyboard or move the mouse to return to normal operating mode 9 Troubleshooting Guide 68 Troubleshooting Guide Source device issue A beeping sound is heard when my PC is booting If a beeping sound is heard when your PC is booting have your PC serviced 9 2 Troubleshooting Guide Q amp A Question How can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel gt Display gt Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel gt
45. nt kit or desktop stand using excessive force The product may get damaged or fall and cause personal injury Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall mount kit or desktop stand using excessive force Samsung shall not be held liable for any product damage or personal injury caused by using a wall mount kit other than the one specified or from an attempt to install the wall mount kit on your own To mount the product on a wall ensure you purchase a wall mount kit that can be installed 10cm or farther away from the wall Be sure to use a wall mount kit that complies with the standards To install the monitor using a wall mount disconnect the stand base from the monitor Preparations 1 3 5 Anti theft Lock An anti theft lock allows you to use the product securely even in public places The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details The lock device is sold separately A The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality To lock an anti theft locking device Fix the cable of your anti theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end Insert the locking device into the an
46. ny Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired A Panel Dots Pixels Power Supply This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Temperature 50 F 104 F 10 C 40 C Operating Environmental Humidity 10 96 80 non condensing considerations Temperature 4 F 113 F 20 C 45 C Storage Humidity 5 96 95 non condensing Due to the nature of the manufacturing of this product approximately 1 pixel per million 1ppm may be brighter or darker on the LCD panel This does not affect product performance WZ The above specifications are subject to change without notice to improve quality A This device is a Class B digital apparatus 10 Specifications v Specifications USA only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 y Specifications 10 2 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time
47. ode Key Repeat Time Source Detection v PC AV Mode Off On BP 14h Acceleration Auto KI LY a ca suo y A v La Lv 4 AUTO v v v v y 4 Press A YW to move to the option you want and press 0 0 5 The selected option will be applied 0 0 v 6 Setup and Reset 54 Setup and Reset 6 6 Key Repeat Time Control the response rate of a button when the button is pressed 6 6 1 Configuring Key Repeat Time Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press M V to move to SETUP amp RESET and press I C on the product 3 Press A V to move to Key Repeat Time and press 13 8 on the product The following screen will appear SETUP amp RESET Acceleration 1 sec 2 sec No Repeat La iv A es nm v v v v v v e Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is pressed 4 Press 4 W to move to the option you want and press 5 0 5 The selected option will be applied 6 Setup and Reset 55 6 7 Setup and Reset Source Detection You can activate Source Detection 6 7 1 Configuring Source Detection 1 2 Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen Press A V to move to SETUP
48. orresponding menu screen 2 Press A W to move to PICTURE and press I on the product 3 Press A V to move to Sharpness and press Hc on the product The following screen will appear AUTO O y v y 4 Adjust the Sharpness using the A V buttons 5 The selected option will be applied 3 Screen Setup 331 3 4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used IZ This menu is not available when Eco Saving is enabled You can customize the brightness to suit your preferences 3 4 1 Configuring SAMSUNG MAGIC Bright Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to PICTURE and press 13 c on the product 3 Press 4 W to move to jp23416Bright and press 13 8 on the product The following screen will appear PICTURE Custom Standard Game Cinema Dynamic Contrast KI EA 4 AUTO x z z v v v e Custom Customize the contrast and brightness as required e Standard Obtain a picture quality suitable for editing documents or using Internet e Game Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic movements e Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content e Dynamic Contrast Ob
49. ou can adjust the product with the mouse and the keyboard without using the operating buttons of the product 8 1 2 Installing the Software Insert the installation CD into the CD ROM drive 2 Select the MagicTune setup program NG If the pop up screen for the software installation does not appear on the main screen find and double click the MagicTune setup file on the CD ROM 3 Select the installation language and click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen 4 e The software may not work properly if you do not restart the computer after the installation a e The MagicTune icon may not appear depending on the computer system and the product specifications e Ifthe shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MagicTune The installation of MagicTune may be affected by the graphics card motherboard and the networking environment System Requirements OS e Windows XP Windows Vista Windows 7 Windows 8 Installing the Software 8 1 3 Removing the Software You can only remove MagicTune through Add or Remove Programs in Windows To remove MagicTune complete the following steps 1 Da AR W N Click Start select Settings and select Control Panel from the menu For Windows XP click Start and select Control Panel from the menu Double click the Add or R
50. page 77 e Product failure an electric shock or fire may result Before Using the Product 15 Before Using the Product A Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e If you are not going to use the product for an extended period of time activate power saving mode or a moving picture screen saver Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc e Otherwise a fire may result from accumulated dust overheating an electric shock or electric leakage Use the product at the recommended resolution and frequency e Otherwise Your eyesight may deteriorate Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not hold the monitor upside down or move it by holding the stand e The product may fall and break or cause a personal injury Do not use humidifiers or stoves around the product e An electric shock or fire may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store th
51. provided Refer to your product for details Reset Return all the settings for the product to the default factory settings 6 1 1 Initializing Settings Reset Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to SETUP amp RESET and press t c on the product 3 Press A V to move to Reset and press 3 2 on the product The following screen will appear SETUP amp RESET Reset Eco Saving Off Timer Turn Off After PC AV Mode Key Repeat Time Acceleration Source Detection Auto v 4 Press 4 W to move to the option you want and press 3 5 The selected option will be applied 6 Setup and Reset ET 6 2 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel A This menu is not available when ffa GieBright is in Dynamic Contrast mode 6 2 1 Configuring Eco Saving Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to SETUP amp RESET and press t c on the product 3 Press A V to move to Eco Saving and press 13 8 on the product The following screen will appear SETUP amp RESET 4 LY 4 u O La v v v v v e 75 Change the monitor power consumption to 75 of the defaul
52. roduct to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W to move to INFORMATION The current input source frequency and resolution will appear PICTURE sy ore K 51 Analog kHz Hz PP MENU SETTINGS x o SETUP amp RESET eee Hz INFORMATION 7 INFORMATION Menu and Others 58 INFORMATION Menu and Others 7 2 Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness or Contrast setting using the buttons in the initial screen when no OSD menu is displayed A Brightness e This menu is not available when MAc cBright is set to Dynamic Contrast mode e _ This menu is not available when Eco Saving is enabled EZ Contrast e This menu is not available when Ma GicBright is in Cinema or Dynamic Contrast mode Press any button on the front of the product when no menu screen is displayed to display the Key guide Next press The following screen will appear Contrast 2 Press the 3 c button to alternate between the Brightness and Contrast settings 3 Adjust the Brightness or Contrast setting using the A V buttons 7 INFORMATION Menu and Others ET 8 1 Installing the Software Magic Tune 8 1 1 What is MagicTune Mag clune MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy to understand guidelines Y
53. s a stove e Otherwise the product lifespan may be reduced or a fire may result Do not install the product within the reach of young children e The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Take care not to drop the product when moving it e Otherwise product failure or personal injury may result Do not set down the product on its front e The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e _ The product may fall and break or cause a personal injury e Install the product only on cabinets or shelves of the right size Before Using the Product Put down the product carefully e The product may fall and break or cause a personal injury Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Besure to consult Samsung Customer Service Center page 77 before installation if you want to install the product at such a place Operation and Safety High voltage runs through
54. some locations op Quick setup guide Power cable D SUB cable optional DVI cable optional Stand base A Components may vary depending on the country Preparations 1 2 Parts 1 2 1 Frontal Buttons IZ The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Key Guide MENU SAMSUNG MAGIC BRIGHT v 3 es Mm CASTERS RO Icons Description e _ Open or close the onscreen display OSD menu or return to the parent menu e OSD control lock Maintain the current settings or lock the OSD control to prevent unintended changes to settings Enable To lock the OSD control press the MENU button for 10 seconds Disable To unlock the locked OSD control press the MENU button MENU for more than 10 seconds A If the OSD control is locked e Brightness and Contrast can be adjusted and INFORMATION can be viewed e The Customized Key function can be used by pressing the 4s button The Customized Key is available even when the OSD control is locked Configure Customized Key and press 4 The following options will be enabled SAMSUNG ES MAc cBright Eco Saving Image Size To configure Customized Key go to SETUP amp RESET Customized Key and select the mode you want Move to the upper or lower menu or adjust the value for an option on the AT OSD menu
55. sponding menu screen 2 Press 4 W to move to PICTURE and press a on the product 3 Press A V to move to Brightness and press t c on the product The following screen will appear KI o AUTO v v v v v v 4 Adjust the Brightness using the A V buttons 5 The selected option will be applied Screen Setup 3 2 Contrast Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer This menu is not available when MA e cBright is in Cinema or Dynamic Contrast mode 3 2 1 Configuring Contrast Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to PICTURE and press 2 c on the product D 3 Press 4 W to move to Contrast and press t c on the product The following screen will I appear KI 2 AUTO amp LA v v v v v 4 Adjust the Contrast using the A W buttons 5 The selected option will be applied 3 3 Screen Setup Sharpness Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer K This menu is not available when MA gicBright is in Cinema or Dynamic Contrast mode 3 3 1 Configuring Sharpness Press any button on the front of the product to display the Key Guide Next press MENU to display the c
56. t level e 50 Change the monitor power consumption to 50 of the default level e Off Deactivate the Eco Saving function 4 Press 4 W to move to the option you want and press 5 0 5 The selected option will be applied 6 Setup and Reset 51 6 3 Setup and Reset Off Timer You can set the product to automatically turn off 6 3 1 Configuring Off Timer 1 2 Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen Press A V to move to SETUP8 RESET and press O C on the product Press A V to move to Off Timer and press R c on the product The following screen will appear SETUP amp RESET 4 iv a auto 0 e Off Deactivate the off timer so that the product does not power off automatically e On Activate the off timer so that the product powers off automatically Press A V to move to the option you want and press T T The selected option will be applied 6 Setup and Reset 52 6 4 Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours A This option is only available when Off Timer is set to On 6 4 1 Configuring Turn Off After Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen 2 Press 4 W
57. tain balanced brightness through automatic contrast adjustment 4 Press 4 W to move to the option you want and press a c 5 The selected option will be applied 3 5 Screen Setup Image Size Change the picture size 3 5 1 Changing the Image Size 1 2 Press any button on the front of the product to display the Key Guide Next press MENU to display the corresponding menu screen Press A W to move to PICTURE and press H C on the product Press A V to move to Image Size and press H C on the product The following screen will appear el iv 4 AUTO O w v W v v v e Auto Display the picture according to the aspect ratio of the input source e Wide Display the picture in full screen regardless of the aspect ratio of the input source 3 Screen Setup 35 Screen Setup 4 3 Wide Screen Fit La Lv 4 AUTO Wy v w v v v v e 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e Wide Display the picture in full screen regardless of the aspect ratio of the input source e Screen Fit Display the picture with the original aspect ratio without cutting off NG Changing the screen size is available when the following conditions are satisfied e Adigital output device is connected using the DVI cable e The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all
58. te and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal lines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85 000 times per second and the horizontal frequency is indicated in 85kHz Vertical Frequency One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Appendix 85 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1 920 horizontal pix
59. the product Do not attempt to disassemble repair or modify the product on your own e An electric shock or fire may result e Contact Samsung Customer Service Center page 77 for repair Before moving the product turn off the power switch and disconnect the power cable and all other connected cables e Otherwise the power cord may be damaged and a fire or electric shock may result If the product generates a strange noise a burning smell or smoke remove the power cord immediately and contact Samsung Customer Service Center page 77 e An electric shock or fire may result Do not let children hang from the product or climb on top of it e The product may fall and your child may become injured or seriously harmed If the product falls or the exterior is damaged power off the product remove the power cord and contact Samsung Customer Service Center page 77 e Otherwise an electric shock or fire may result Do not put a heavy object toy or sweets on top of the product e The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury Before Using the Product EYE Before Using the Product U 2 During a lightning or thunderstorm power off the product and remove the power cable e An electric shock or fire may result Do not drop objects
60. ti theft lock slot at the back of the product KR Q N ra Lock the locking device An anti theft locking device can be purchased separately e Refer to the user guide provided with your anti theft locking device for details e Anti theft locking devices can be purchased at electronics retailers or online R 2 1 2 2 Connecting and Using a Source Device Before Connecting 2 1 1 Pre connection Checkpoints e _ Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device e Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product e Check the types of ports at the back of the product you want to connect Connecting and Using a PC 2 2 1 Connecting to a PC e Selecta connection method suitable for your PC e _ Connecting parts may differ in different products e _ The exterior may differ depending on the product Connection Using the D SUB Cable Analog Type Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable Connect the D SUB cable to the RGB IN port on the back of the product and the RGB port on the PC 2 Press Q C3 to change the input source to Analog Connecting and Using a Source Device

Download Pdf Manuals

Related Search

Related Contents

  GPSSAFE Bedienung - hoeckle  Manual de usuario  PDP TV Service Manual Hisense confidential  Lazer WideRace  Thank you very much for choosing AMOI H9, the  Service Manual  ORB Serie Benutzerhandbuch  Greenheck Fan RBUMO User's Manual  

Copyright © All rights reserved. Failed to retrieve file