Home

Samsung 70" 700TSn-2Touchscreen LCD Display User Manual

1. 1 R Gain 2 G Gain 3 B Gain 4 R Offset 5 G Offset 6 B Offset Size LJ a More Sigal Balance PIP Picture Dynamic Contrast Lamp Control Brightness Sensor Adjusting the LCD Display The Size can be switched 1 16 9 2 4 3 HDMI Black Level LZ as More Sigal Balance Size PIP Picture Dynamic Contrast Lamp Control Brightness Sensor When watching with a DVD or set top box connecting to the product via HDMI or DVI image quality deterioration black level lower quality contrast lighter color tone etc may occur depending on the connected external device 1 Normal 2 Low Note e For Timing which can be used for both the PC and the DTV in DVI HDMI mode HDMI Black Level will be activated PIP Picture Adjusts the PIP Screen Settings Hi Note e Available Modes PIP ON 1 Contrast po v Adjusts the Contrast of the PIP window on the screen 2 Brightness a v Adjusts the Brightness of the PIP window on the screen 3 Sharpness AA v Adjusts the Sharpness of the PIP window on the screen 4 Color Adjusting the LCD Display Adjusts the Color of the PIP window on the screen pin Note Enabled only when the PIP input is selected in AV HDMI or Component mode 5 Tint Adds a natural tone to the PIP window i NG Note Enabled only when the PIP input is selected in AV HDMI or Component mode Oper ates only if the video signal
2. Make sure to use the top center and not the left or the right side of the product to adjust the angle Connections Connecting a Computer pay a S a gt ae 3 ya There are several ways to connect the computer to the monitor Choose one from the following options Using the D sub Analog connector on the video card e Connect the D sub to the 15 pin RGB COMPONENT IN port on the back of your LCD Display and the 15 pin D sub Port on the computer RGB ai kal Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI IN port on the back of your LCD Display and the DVI port on the computer Connections using the HDMI digital output on the graphics card e Connect the HDMI IN port on the monitor to the HDMI port on the PC using the HDMI cable Note When the HDMI cable to the PC ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted Note that sound is only available when connected according to the option O that follows Connect the audio cable for your LCD Display to the audio port on the back of the LCD Display Connect the power cord for your LCD Display to the power port on the back of the LCD Display Turn on the power switch Note e Turn on both your computer and the LCD Display e Contact a local SAMSUNG Electronics
3. Je An Info Grid showing several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control 3 Manual Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control The Maintenance Control feature is available only for the displays whose power status is ON 3k The Input source of Magicl nfo works only on Magici nfo model k The Input source of TV works only on TV model p9 Maintenance Ww Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Fie Remocon Safety Lock Port Selection Help Select All Clear All 1 Scroll This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time Pixel Shift This allows the screen to be moved finely at the specified time interval NI UJ Safety Screen The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time The Interval item is used to set the repetition cycle in hour units and the Time item is used to set
4. RS232C OUTIIN RS232C Serial PORT MDC Multiple Display Control Program Port GO RGB COMPONENT IN PC Connection Terminal Input e Use a D Sub Cable 15 pin D Sub PC mode Analog PC e Connect the RGB COMPONENT IN port on the monitor to the COMPONENT port on the external device using the D Sub to COMPONENT cable e Connect the RGB COMPONENT IN port on the monitor to the BNC port on the PC using the D Sub to BNC cable O DVI IN PC Video Connection Terminal Use a DVI Cable DVI D to DVI D DVI mode Digital PC O DVI RGB HDMI AUDIO IN PC DVI Audio Connection Terminal Input AV COMPONENT AUDIO IN R AU lg DIO L minion O oO o Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the LCD Display DVI OUT Introduction e Connect a monitor to another monitor through a DVI cable e Connect the DVI OUT port on the monitor to the HDMI IN port on the other monitor using the DVI to HDMI cable e DVI HDMI and network signals sent via the DVI OUT port are displayed on the second display which has the DVI IN port Note Up to 6 Full HD or 10 HD monitors can be connected May differ depending on the product AV IN VIDEO Connect the VIDEO terminal of your mon itor to the video output terminal of the exter nal device using a VIDEO cable Taupo OUT Headphone External speaker output termi nal HD
5. eae a pa court lt ick oo Kae Specifications 1 Define each value in Delay Touch Settings after selecting to activate Enable Delay Touch It is recommended that Delay is set between 40 and 50 and Area to 2 T7 note The touch response can be obtained after activating the False touch rejection function MDC Multiple Display Control Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MDC installation file Using the Software Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the MDC executable file on the CD 3 When the Installation Shield Wizard window appears click Next 4 Select agree to the terms of the license agreement to accept the terms of use 5 Click Install 6 The Installation Status window appears 7 Click Finish 8 When the installation is complete the MDC executable icon appears on your desktop Double click the icon to start the program MDC execution icon may not appear depending on specification of computer sys tem or monitor If that happens press F5 Key Installation Problems The installation of MDC can be affected by such factors as the video card motherboard and the network environment Uninstall The MDC program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the followin
6. Adjusting the LCD Display Color Temp is a measure of the warmth of the image colors Note This function is only enabled if the Color Tone is set to Off Not available when Dynamic Contrast is set to On Image Lock Lid Coarse Fine Position Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Note Available in PC mode only a Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed Adjusts the screen location horizontally and vertically Auto Adjustment Li Auto Adjustment Please wait The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Note Available in PC mode only Adjusting the LCD Display Signal Balance Li This is used to make up for the weak RGB signal transmitted by a long signal cable Note Available in PC mode only Not available when Dynamic Contrast is set to On Signal Balance Selects either On or Off with the Signal Control
7. FILATIXMIX MTS DUAL 1 POWER 2 O OFF 3 Number Buttons 4 DEL GUIDE but ton 5 VOL 6 SOURCE 7 UI D MENU 8 TOOLS 9 Up Down Left Right but tons 10 1 INFO 11 COLOR BUTTONS 12 FILE TTXWMIX Introduction E ENTER PRE CH K MUTE Vv CHIP A TV O MENU O RETURN o if ExT Magiclnfo 0o00 Turns the product On Turns the product Off Press to change the channel The button is used to select Digital channels Electronic Program Guide EPG display This function does not work for this LCD Display Adjusts the audio volume Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time DTV menu display This function does not work for this LCD Display Use to quickly select frequently used functions This function does not work for this LCD Display Moves from one menu item to another horizontally vertically or adjusts selected menu values Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu This function does not work for this LCD Display TV channels provide written information services via tele text Teletext Buttons 0506302 C8200 Cf G2080808 0808 This function does not work for this
8. Insert CD into the CD ROM drive Click Start Panid Bete ibe E gt Fely Pte il aa KHotapaodi ig Pi a paiba Ww Pairt E3 Windows odio Mara PERN Caplorar bi amd Movi Pako 0 rage as Paa EEJ Bun Click Display oon eee Pee Down IE 2y Piy Kasama Dangan age Panes and Faran 7 rep and Suoport Control Panel then click the Appearance and Themes icon icon and choose the Settings tab then click Advanced Themer Cia Juren Terem aman Balbnga Lare n Fiap mej Mhay biorda cers Mr Pabo Dji Sen dete Greka pisiy Hikghandi 37 bit E E 8 EE I EE Cae cance TOJA by FES pikwa Plug and Play Monitor and 30 Prophet IN Properties 2 s orel General Pigra HA al Pag and Plage Honko Sd Device Selection horace Piore piire Jonen nakagh ata E0 Heitz C Hide eden that Ehiz PAOS MNL CBEN Ciemi thea cheek boa o beheck da Wg mndi retake Click Update Driver Direc Provides Diree Date Micrownlt Apo Dies Wes moe S12001 0 igtal Sigra Update Duig Bol Pack Dra Upa io iha daya To alaia aa kian To wereld Whe hives uliraroed Select Don t search will 2 Colo Conection Tisubisahast Color Aanagamani PB En iplay rak haa Ko play e pagasa Thi mag bead bo sn Lara sib dag and select Install from a list or Miceomoft Window bf Pubilahar To wees cite alld iha hira Pee IP ihe deseg kada a
9. mode is the default one fully emulating mouse operation such as left button clicking moving lifting and dragging This mode is best for writing drawing and dragging 4 Enable Touch Enable default disable touchscreen 5 Hide Cursor Hide the cursor by clicking Hide cursor in Options when the mouse cursor is not used in some applications 6 Send Right Click You can enable the right click function default Click and press on any area on the screen for two seconds The right click pop up menu will show up Right click is only Using the Software available in the Mouse Emulation mode You can adjust the value of Delay in Right Click Settings Note The higher the Delay value the longer the right click menu pop up time Delay is displayed in milliseconds Area is used for adjusting the jitter range of the touch surface within a limit of error unit pixel The higher the Area value the wider the range of jitter The Right Click menu will pop up when the finger contacts the screen for a while within the pre set range of time and jitter Enable Double Click It is similar to the mouse s double click function Obtain the best performance regarding Double Click by setting the Double Click Settings properties Speed is displayed in milliseconds The higher the speed value the longer the effective time between the two clicks of a double click event Area is used for amplifying or reducing t
10. Area value is set to 32px to obtain the best performance regarding the right click function 2 Enable Double Click Same as the mouse s double click function If you double click an object in accordance with the Speed and Area settings it will open The parameter set tings for best operation are a Speed value between 500 and 550 and an Area value of 32px 3 Drag Delay This function shows the amount of time in milliseconds to wait before Drag is executed after being clicked If the object cannot be precisely selected or the cursor jitters when you attempt to touch adjust Drag Delay to the correct value by drag ging the slide bar It is displayed in milliseconds Settings for touchscreen in strong light rain and snow conditions A snowflake or raindrop can cause an unwanted single touch operation The Enable Delay function will prevent such a false screen touch Using the Software Modes C Click On Touch C Click On Release f Mouse Emdation Options IW Enable Touch Hide Cursor W Send Right Click IR TETOUCHSY5STENS Touchscreen Properties RightClick Settings 2000 PUBLADUN ELA NLA DoubleClick Settings Speed 500 Peeetteer de bidet ae sea Taman 16 Iv Enable Double Click M Enable Delay Touch 2 Prevent Syssem To Standby DelayT ouch Settings Drag Delay iv False touch rejection
11. Safety Lock Port Selection Help Select Alt Clear Ali Choose Input Source PE AW S Video Component Pa he Oe 9 ka anp HORI f4 Channel Pa e PC Mode Je Info Grid shows some basic information necessary to Input Source Control 1 PC Changes the Input Source of the selected display to PC 2 BNC Changes the Input Source of the selected display to BNC 3 DVI Changes the Input Source of the selected display to DVI 4 TV Changes the Input Source of the selected display to TV 5 DTV Changes the Input Source of the selected display to DTV 6 AV Changes the Input Source of the selected display to AV 7 S Video Changes the Input Source of the selected display to S Video 8 Component Changes the Input Source of the selected display to Component 9 Magicl nfo The Input source of Magicl nfo works only on Magicl nfo model 10 HDMI Changes the Input Source of the selected display to HDMI 11 Channel Channel arrow appears when the Input Source is TV k TV Source can be selected only in products with TV and controlling channels is allowed only when Input Source is TV The Input Source Control feature is available only for the displays whose power status is ON Ee I mage Size PC BNC DVI 1 Click Image Size of the main icons and the Image Size control screen appears ie Multiple Display Control File Remocon Safety Lock Port Selection Help e Setac
12. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property dam age Make sure to read the instructions carefully and use the product in the correct manner E Warning Caution fax Failure to follow directions noted by this symbol could result in bodily N harm or damage to the equipment DO Note Important to read and under Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Ground to prevent an electric Do not touch ehaek O A When not used for extended period of time set your computer to DPM If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 3 Do not use a damaged power cord or plug or a damaged or Mako loose power outlet mi Otherwise this may result in electric shock or fire L Do not touch the power plug with wet hands when removing or S A plugging the plug into the outlet Pil O K Otherwise this may result in electric shock L Make sure to connect the power cord to a grounded power out Ji let G E e Otherwise it may result in electric shock or personal injury I
13. 10 50 sec Scroll This function helps to remove after images on the screen by moving all the pixels on the LCD according to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time Bar This function prevents after images on the screen by moving long black and white vertical lines Adjusting the LCD Display Eraser This function prevents after images on the screen by moving a rectangular pattern Side Gray ear Ee Pixel Shift Timer Select the brightness of the grey for the screen background 1 Off 2 Light 3 Dark Resolution Select G T _ _ r ab ore Power On Adjustment Moca oa OSD Rotation 1280 x 768 Reset 1360 x 768 1366 x 768 When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x 768 60Hz by using this function Resolution Select you can have the picture displayed on the screen in the specified resolution Note Available in PC mode only 1 Off 2 1024 X 768 3 1280 X 768 4 1360 x 768 Adjusting the LCD Display 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x 768 60Hz Power On Adjustment LAX 0 Adjusts the Pow
14. 4 Shows the On Time settings 5 Shows the Off Time settings The Input source of Magicl nfo works only on Magic nfo model 3k The Input source of TV works only on TV model k Time Control is available only for the displays for which the power status is ON amp At On Time Setup TV Source functions only for TV Model amp At On Time Setup Magicl nfo Source functions only for Magicl nfo Model NG PIP PIP Size 1 Click PIP of the main icons and the PIP control screen appears Click Select All or use Check Box to select a display to control pA Multiple Display Control Fie Remocon Safety Lock Port Selection Satect All Clear All i GD PIP Size l Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display and changes the size to Large 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Double 2 Double 3 Picture By Picture NI Turns on the PBP of the selected display and changes the size to Double 3 k The Input source of Magicl nfo works only on Magicl nfo model k The Input source of TV works only on TV mode
15. 5 Setup Information Adjusting the LCD Display iz Magicinfo Setup Wizard v 1 03 5 Setup Information Application 2 Internet Protocol TCP IP IP 10 89 69 107 3 Language Korean 4 Screen Type Landscape E Do not show again Click lt BacktB Apply Cancel Shows the settings that have been selected by the user Note If the Magiclnfo icon is not displayed on the notification area double click the Magiclnfo icon on the window desktop The icon will appear Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below Check Signal Cable appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen qr Check Signal Cable PC 4 Turn off your LCD Display and reconnect the video cable then turn on both your com puter and the LCD Display lf your LCD Display screen remains blank after using the previous procedure check your video controller and computer system your LCD Display is functioning properly Warning Messag
16. A The sofware pou are installing for this hardware Samsung sasa has no passed Windows Logo besing bo ani its compatibel with Windows XP Tell mg why the besting ts important Continuing your installation of this software may impair or destabilize the comect operation of your system either immediately of in the future Microzoll strongly recommends thal pou stop this installation now and contact the hardware vendor for software that has passed Window Logo beating Using the Software Note This monitor driver is certified by Microsoft and installing it will not damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click E9 Start and Control Panel Then double click on Appearance and Personal ization 3 Click Personalization and then Display Settings oem mmm mm AA AA YY YY rer ar ee el a ee er cee a F iea TEDS mwa kal ee ee TS ara Ca aaa a ika Wa ie lng a a ang Ee keem eee ge maan maga il a a a m a mamana ee ee ee ee a pa Bajd a eg le a ag os es ey r ed i ma ee aag or a ee 4 Click Advanced Settings fe aplay Settings Sorts Dang Be Kora ba makeh pou eer L plaig Monitor ba AA Gefore iG LE fheir Cp F 5 Click Properties in the Monitor tab If the Properties button i
17. Adjusts the picture Sharpness Color Adjusts the picture Color Tint Adds a natural tone to the display Color Tone Mode Custom Digital NR Mor The color tones can be changed The individual Color components are also user adjustable 1 2 3i 4 5 6 Off Cool2 Cool1 Normal Warm1 Warm2 Note Not available when Dynamic Contrast is set to On If you set the Color Tone to Cool2 Cool1 Normal Warm1 or Warm2 the Color Temp function is disabled Color Temp LUIS Ss Color temp is a measure of the warmth of the image colors Adjusting the LCD Display nan Note Not available when Dynamic Contrast is set to On This function is only enabled if the Color Tone is set to Off Size The Size can be switched 1 16 9 Sets the picture to 16 9 wide mode 2 Zoom 1 Magnifies the size of the picture on the screen 3 Zoom 2 Magnifies the size of the picture more than Zoom 1 4 4 3 Sets the picture to 4 3 normal mode 5 Screen Fit Displays the input scenes as they are without any cutoff when HDMI 720p 10801 1080p signals are input Note e Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature ex Zoom 1 Zoom 2 are unavailable in HDMI mode e The Position and Reset functions are available in Zoom 1 or Zoom 2 modes Digital NR Digital Noise Reduction aaa ff f
18. Apply current time to synchronize the display clocks 5 The remote may not function properly when you turn off the remote Function disconnect the RS 232C cable or exit the program in an Irregular manner Rerun the program and turn the remote function again to Restore normal functions lt Note gt This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby Please make selection in the Information grid before controlling Settings Value Display In Multiple Display Mode When there are more than one displays connected the settings values are displayed as follows 1 No selection Displays the Factory Default Value 2 Selected one display Fetches and displays the settings value for the selected display 3 Selected one display ID1 and add another display 1D3 The program which was displaying the settings value of ID 1 fetches and displays the value of D3 4 Selected all sets using Select All Returns to the Factory Default Value Copyright 2003 2009 Samsung Electronics Co Ltd All rights reserved Adjusting the LCD Display Input Available Modes PC DVI Dav 4 Component gt HDMI M Magicinfo Source List ZI T Component HDMI Magicinfo Use to select PC DVI or other external input sources connected to the LCD Display Use to select the screen of your choice 1 PC 2 DVI 3 AV 4 Component 5 HDMI 6
19. and may result in fire O IV O Do not drop any objects onto the product or cause any impact ie to the product e Otherwise this may result in electric shock or fire O 3 Do not use a humidifier near the product a Otherwise this may result in electric shock or fire O x J When there is a gas leak do not touch the product or the power e7 plug ventilate immediately A a e fa spark occurs it may cause an explosion or fire L If the product has been turned on for a long time the display panel becomes hot Do not touch it O Keep the small accessories in a location out of the reach of chil dren T Tm Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause personal injury o 3 Do not install the product in a location low enough for children to reach P ra ERF EAN A d THN A i FC aay Y Mr Otherwise it may fall and result in personal injury Safety Instructions e Since the front part of the product is heavy install the product on a level and stable surface o tf 3 Do not put any heavy objects on the product e This may result in personal injury and or damage to the prod X uct Power Installation Guide e Make sure to read and follow the instructions carefully and correct ly Failing to do so
20. failing to click the cross at first you can continually move to the cross click and then release Press the Esc button to exit calibration After calibration the Recalibrate OK and Can cel buttons will show up ReCalibrate means recalibration OK means saving and exit Cancel means exit without saving Using the Software Mode Settings i IRTOUCHSYSTIENS TouchScreen Properties Modes RightClick Settings Click On Touch Delay aaa 1000 EIA Knin amp bt big Click On Release Ng i i i a i i i f Mouse Emulation Options DoubleClick Settings I Enable Touch Speed Hide Cursor Aig ee i Send Right Click if Enable Double Click Enable Delay Touch Prevent System To Standby False touch rejection CETER 1 Click on touch When the finger contacts a touch screen the mouse s single click will happen automati cally The mode only applies to touch not to drag In this mode the touchscreen responds the fastest This mode is usually used for clicking a large object e g OK button in the pop up window in applications 2 Click on Release A mouse click event happens at the point where the finger leaves the touchscreen it is a precisely controlled mode and therefore good for clicking a small object e g Minimize button in the pop up window or hyperlink of web pages such as POS and WEB appli cations 3 Mouse Emulation The Mouse Emulation
21. may result in death serious personal injury or fire O Power Installation Guide Before installing the product make sure to check the power requirements for the installation location If you want to install the product in a power environment power cable power outlet circuit breaker etc with a current power capacity lower than the current product consumption power consumption install a separate power transformer according to the Rated Capacities table The consumer should pay the expenses for this Make sure to connect the product to a dedicated power outlet and do not connect it to a multi plug extension cord If you have to use a multi plug extension cord refer to the current con sumption in the Rated Capacities table and use a multi plug with the permitted current specifications greater than the total current consumption of the products connected to it When using a dedicated power extension cable use a high capacity power cable Use a power cable with a permitted current of 12 5 A or more L Rated Current of the Power Plug Cord Appliance Coupler Use a power cable with 12 5 A or more Note Refer to the Cable Safety Specifications e UL specifications Use a cable with 14 AWG or more e KS specification Use a cable with 20 SQ or more e IEC specification Use a cable with 2 5 SQ or more Introduction Package Contents Note Please make sure the following items are included with your LCD Dis
22. nat Note Available Modes PIP ON 1 Main 2 Sub Speaker Select Mode Custom Custom Auto Volume Off SRS TS XT Off External When you use the product with it connecting to a Home theater turn the Internal speakers off so you can listen to sound from the Home theater s external speakers 1 Internal Sound is outputted both from the Internal speaker and the External speakers but the volume control is only available from the Internal speaker Adjusting the LCD Display 2 External When sound is only outputted from the External speakers the volume control is also only available from the External speakers Setup Available Modes JPC DVI gt Elav 5 Component UU HDMI M Magicinfo Language tats 1 Time Menu Transparency Safety Lock Energy Saving Video VVall Safety Screen More You can choose one of 13 languages English Deutsch Espanol Francais Italiano Svenska Pyccknn Portugu s T rk e iE rE Sadr AAR O rs Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Time LETT Selects from one of 4 time settings Clock Set Sleep Timer On Timer and Off Timer Clock Set Hour Minute am pm sili C a F Current Time Setting Adjusting the LCD Display Sleep Timer Clock Set man GTA 30 60 90 120 150 180 Turns the LCD Display off automatically at certain times 1 Off 2 30 3 60 4 90
23. the product or fire due to damage to the cable L Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal temperature NG L Do not place any containers containing water vases flower i pots medicines as well as any metal on the product e If water or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire 3 Do not use or keep combustible spray or flammable material K an w near the product e Otherwise this may result in an explosion or fire steel or flammable objects such as matches or paper inside the YY product through the ventilating openings input and output termi nals etc Dn lf Do not insert any metal such as chopsticks coins pins and 3 e If water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L When using a fixed screen for a long time an afterimage or stain may occur O e Ifyou are not using your product for a long period of time pu
24. 5 120 6 150 7 180 On Timer Turns the LCD Display on automatically at a preset time Controls the mode and the volume level at the time the LCD Display turns on automatically Off Timer Turns the LCD Display off automatically at a preset time Adjusting the LCD Display Menu Transparency LAM 7 Language English Time bilal Safety Lock Medium Energy Saving ff Br Video Wall Safety Screen More Change the transparency of the background of the OSD 1 High 2 Medium 3 Low 4 Opaque Safety Lock Change PIN Enter FIN a a The password can be changed Note The preset password for the LCD Display is 0000 Lock On NOTA Enter PIN g Enter PIN 2 Return This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings Adjusting the LCD Display Energy Saving A M Language English Time Menu Transparency Opaque Safety Lock Video Wall Safety Screen More This feature adjusts the power consumption of the unit in order to save energy 1 Off 2 On Video Wall A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each screen When the Video Wall is on you can adjust the Video Wall screen setting Note When Video Wall is running the Auto Adjustment Image Lock and Si
25. A Pra 7 O F O gt O 5 O O The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset
26. Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file 1 Press Enter at the first and the second screen after executing the X86Config file 2 The third screen is for setting your mouse 3 Seta mouse for your computer 4 The next screen is for selecting a keyboard 10 IRTOUCH Using the Software Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other re quested hardware IRTouch Screen Control Panel Double click the mark as shown below on the desktop or follow Start 5 All programs 5 IRTouchSystems and then click IR TouchScreen Control Panel and go to the Control Panel of the touchscreens as follows Er gi
27. OR Name the input device connected to the input jacks to make your input source selection easier VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR PC DVI Device Note The displayed devices differ depending on the external input mode When connecting a PC to the HDMI or DVI terminal set Edit Name to PC In other cases set Edit Name to AV However since 640x480 720P 1280x720 and 1080p 1920x1080 are common signals for AV and PC make sure to set the Edit Name in accordance with the input signal The Picture menu changes depending on the input signal and Edit Name Picture PC DVI Magiclnfo Mode Available Modes J PC DVI EJ Av 4 Component C HDMI M Magicinfo MagicBright LIN ete Custom Color Tone Color Control Image Lock Auto Adjustment w More paanan TF aT AN MagicBright is a feature providing the optimum viewing environment depending on the con tents of the image you are watching Currently four different modes are available Enter tain Internet Text and Custom Each mode has its own pre configured brightness value Not available when Dynamic Contrast is set to On Adjusting the LCD Display 1 Entertain High brightness For watching motion pictures such as from a DVD or VCR 2 Internet Medium brightness For working with a mixture of images such as texts and graphics 3 Text Normal brightness For documents o
28. Select All or use Check Box to select a display to control Info Grid displays only the display having TV AV S Video Component or DVI HDCP as input source Switch Image Size of the selected display randomly Note Auto Wide Zoom1 and Zoom are not available for selection when the input signal type for Component and DVI HDCP is 720p or 10801 The Auto Wide mode is available only for TV AV and S Video The screen modes can only be adjusted when a TV PAL only is connected and the Image Size item is set to Auto Wide The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model k The I mage Size Control feature is available only for the displays whose power status is ON WW N Time 1 Click Time of the main icons and the Time Control screen appears ba Multiple Display CLontro Safety Lock Port Selection Help select All Clear All Current Tune 1 05 23 On Time Setup Apply Off Time Setup oo Mla Mo E Claus Apply gt Ye Info Grid shows some basic information necessary to Time Control 1 Current Time Set the current time for the selected display PC Time To change the current time first change the PC Time 2 On Time Setup Set the Hour Minute AM PM of On Time Setup Status Source Volume of the selected display 3 Off Time Setup Set the Hour Minute and AM PM Status for Off Time Setup of the selected display
29. Serial Port Settings The name of the IR touch device installed and the number of serial ports are shown in the list Choose Install when some serial ports are available or choose Remove to uninstall the driver if you don t want to use the touchscreen Using the Software serial fouchscreen Banapger Installed TouchScreen Drivers For Serial Device IRTOUCHS YSTEMS InfraRed Touch5creen 2 Attachment General settings for touchscreen Select Mouse Emulation mode to find the available options in Options Enable Touch Send Right Click and Enable Double Click If you select the Enable Delay Touch option touch sensibility will slow down and dragging after a quick click will be treated as disabled operations Dragging and fast clicking will be considered disabled operations Using the Software i IRTOUCHSYSTENS TouchScreen Properties General Modes Beep About Modes FightChck Settings Click On Touch Delay 7 1000 Click On Release HG Anes Options W Enable Touch Hide Cursor Ww Enable Double Click 3 Enable Dela Touch Prevent System To Standby Drag Delay Instructions for the settings 1 Send Right Click You can enable the right click function default Click and press on any area on the screen for two seconds The right click menu will pop up Right click is only available in Mouse Emulation mode In general the Delay value is set to 1000 1 second and the
30. Settings of the main icons and the Settings Control screen appears jea Mukiple Display Control File Remocon Safety Lock Port Selection Help Select att Ceara Busy Power Control Picture TAV S Video Component HOMI DTY Contrast bf be Je Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture Available only for TV AV S Video Component HDMI DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected display 6 Tint Adjusts Tint of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magicl nfo model Color Temp is only enabled if the Color Tone is
31. Timing Modes The image is too light or too dark Adjust the brightness and contrast Refer to the Brightness Contrast 7 O 5 O F O F O Troubleshooting The screen color is inconsistent Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white is poor Adjust color using Custom under OSD Color Adjustment menu The Power Indicator blinks The LCD Display is currently saving the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The LCD Display is using its power management system Press any key on the key board The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the LCD Display and the computer to en sure that the connector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A 7 27 O 7 Q No sound Ensure that the audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound level is too low Check the volume level If the volume is still too low after turning the control to its maxim
32. Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high 2 0 V V low s 0 8 V Maximum Pixel Clock 165MHz Analog Digital Power Supply This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Specifications Signal connectors D sub DVI D In Out VCR HDMI RS232C In Out BNC In OutPC Audio In Audio In L R Audio Out L R With Network Model USB LAN Dimensions W x H x D Weight SyncMaster 1668 0 x 989 0 x 138 0 mm 65 7 x 38 9 x 5 4 inches With 700TSn 2 out Stand 1668 0 x 1094 0 x 500 0 mm 65 7 x 43 1 x 19 7 inches With Stand 83 kg 183 0 Ibs SyncMaster 1915 0 x 1125 0 x 155 0 mm 75 4 x 44 3 x 6 1 inches 820TSn 2 Without Stand 1915 0 x 1230 0 x 500 0 mm 75 4 x 48 4 x 19 7 inches With Stand 140 kg 308 6 Ibs VESA Mounting Interface SyncMaster 800 x 400 mm 700TSn 2 SyncMaster 900 0mm x 800 0mm 1400 0mm x 800 0mm 820TSn 2 Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best op erating conditions and L
33. a To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product 2 Insert the screw B into the plastic hanger th OF A Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes Introduction e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 2 0 1 D EE a E a a rA ss a Je 5cm a 1 Fix the product to the wall bracket Introduction 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust
34. and automatically select the next one Double clicking one of the touchscreens in the list you can select the monitor related to the selected IR touch screen in the pop up select dialog box Click the OK button to save and exit Finishing the above operations the program will show the monitor number relevant to each touchscreen in the Monitor list General Modes Beep About RTOU C HI Use calibration to adjust touchscreen to be best accurate effect Calibrate Select the touchscreen you want in the list and Click Calibrate After calibration the item Calibrated will show Yes Using the Software ig IRTOUCHSYSTEMS TouchScreen Properties General Modes Beep About IRTOUCH calibration to adjust touchscreen to be best accurate effect Please Calibrate after ou have installed a new touchscreen or changed a new model rou find pou can t touch objects accurately TouchScreen Monitor Cai USE iTouch Screen 0 The method of calibration comprises the following steps Select a touchscreen in the infor mation list and then click the Calibrate button when the calibration window shows up At this time four bull s eyes will appear on the screen each of which having a cross in the center The calibration will be completed by clicking in sequence the crosses with a pointer or a finger in a clockwise direction As the calibration is performed in Click on Release mode even if
35. e Mode Custom Custom Color Tone Color Temp Size HDMI Black Level More Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Note Digital NR function is not available for all resolutions Adjusting the LCD Display HDMI Black Level Picture Mode Custom Custom Color Tone Color Temp Size Digital NR Wore When a DVD or set top box is connected to your TV via HDMI or DVI it may cause a deg radation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low Note For Timing which can be used for both the PC and the DTV in DVI HDMI mode HDMI Black Level will be activated Film Mode LIA a Wore PIP Picture Dynamic Contrast Lamp Contral Brightness Sensor The Film Mode feature offers you a theater quality viewing experience In HDMI mode this function is available when the input signal is interlaced scan it is not available is progressive scan 1 Off 2 On PIP Picture fs Adjusts the PIP Screen Settings Note e Available Modes PIP ON 1 Contrast tr Adjusts the Contrast of the PIP window on the screen Adjusting the LCD Display 2 Brightness re Adjusts
36. is NTSC Dynamic Contrast LI a More Sigal Balance Size PIP Picture Lamp Control Brightness Sensor Off Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Lamp Control Lats M gt Adjusts the inverter lamp in order to reduce energy consumption Note Not available when Dynamic Contrast is set to On Brightness Sensor LAY Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to create optimum brightness 1 Off 2 On Adjusting the LCD Display Picture AV HDMI Component Mode Available Modes J PC DVI FJ Av 4 Component CJ HDMI M Magicinfo Mode ee eee Dynamic Custom _ Standard Color Tone Movie Custom Digital NR T More The LCD Display has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory Dynamic Standard Movie or Custom can be activated ae Note Not available when Dynamic Contrast is set to On 1 Pa 3 4 Dynamic Standard Movie Custom Custom LEIS By using the on screen menus the contrast and brightness can be changed to your personal preference Note Not available when Dynamic Contrast is set to On Contrast Adjusts the Contrast Brightness Adjusts the Brightness Sharpness Adjusting the LCD Display
37. m ibr ar irgo m r iraa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software i mga Ghat kha conta dhre a mieded baliw Sarte the aman net pou anal in maba fer thig hardware ora CT Cancel Tani Pa siropi jl Sja a peer Paanan thee o Por plain Pee Pa bara il Pal a Pa eae pin bid Pal th Bos kah Haz Yare Pl ria 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Sebel the dieg diner you ward to nakal for thia hardane a pa ghee deed eich pan Pain ieee fee Pao ein bana pa Sane Pa sid Pha ee pee mc bi alal Clie Harri a Anakan haa sulod updated your dhan sofware akan Baa Lanha acl ualang Pa derre paga Fpa Pk rai x Sate oe Top arm es ais pina Pag wen His Tip pcan Pa deae KP ma ka Pa chat ei Taa Cno Pap anim area Tagal Na jae aa WIL TENETE GO daptar Monitor Troubleshoot Color Management enor Type Sa bang Fine Mono ana NY Monon Satanas Screen refresh rate 80 hertz Gf Hide modes that the monitor cannot display Clarin than cheeck ben apa you ko peci daplay modes that thig monior cannot display correctly This may lead to an unusabie aag T This i my main maagor d Extend the desktep onto thm mortor Microsoft Windows XP Operating System Using the Software
38. some basic information necessary to Power Control 1 El Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer 2 Use the Select All button or Check Box to choose a display to control ie Muli tiple Disp Fie Remocon Safety Lock Port Selection Help Select Alt Clear At E i Power On Power Off Volume 10 Je M Power Control allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider When you cancel the selection or choose Select All the value returns to the default value 10 3 Mute On Off Turns on off the Mute function of the selected display When selecting one set at a time turn on the Mute function for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All k The Power Control feature is available for all displays amp The Volume Control and Mute features are available only for the displays whose power status is ON Soe I nput Source 1 Click Input Source of the main icons and the Input Source control screen appears Click Select All or use Check Box to select a display to control e TV Mode y Control
39. the program Magiclnfo may stop If you do unplug the cable restart the system Do not unplug the LAN cable used by an USB device ex video display Otherwise the program Magiclnfo may stop To access other sources press the SOURCE button in Magiclnfo The preset password for the LCD Display is 000000 The server program s Power On option works only if the LCD Display s power is com pletely shut off Please make sure not to use the Power On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display In the OSD image of Magiclnfo Network mode is the same as Device When using Magiclnfo with the Magiclnfo Server Program perform Network mode When using MagiclInfo with the device directly connected to LCD Display execute Device mode Press ESC to directly go to the Magiclnfo Window screen To setup Magiclnfo on a Windows screen a keyboard and mouse are required To setup Magiclnfo on a Windows screen refer to the Magiclnfo Server Help It is highly recommended not to turn off the AC power during an operation For pivoted LCD Displays ticker transparency is not supported For pivoted LCD Displays a screen resolution of up to 720 480 SD is supported for movies For drive D EWF is not applied Adjusting the LCD Display To save Setup contents that have been changed when EWF is in the Enable state you must Commit them By selecting Disable Enable or C
40. the bracket angle between 2 and 15 Make sure to use the top center and not the left or the right side of the product to adjust the angle Mechanical Layout 820TSn 2 Mechanical Layout 1915 0 1808 4 1124 8 1019 2 LCD Display Head Introduction 1915 0 1808 4 Zai a E gp pa 1019 2 1124 8 800 0 o gt Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions 1400 0 WALL MOUNT HOLE 900 D WALL MOUNT HOLE i n aaa kkhh bai R n i a en ea ee ens es ens hee ins ei e IT Et J i i i HEE Haa nae 1 f a J a ngi gma m ne tenn eA Aye Ng 5 z E gt a a L j i a j eerste 2 900 0 STAND MOUNT HOLE 800 0 WALL MOUNT HOLE Introduction An Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall b
41. the time when the Safety Screen function must be performed The Type item can be set to Scroll Pixel Bar Eraser All White or Pattern 4 Safety Screen2 This function is used to prevent afterimages from occurring There are five 5 types that you can select and control with this function For the Scroll type the Time item can be set to 1 2 3 4 or 5 For the Bar and Eraser types it can be set to 10 20 30 40 or 50 For the All White and Pattern type it can be set to 1 5 10 20 or 30 The Input source of Magicl nfo works only on Magic nfo model The Input source of TV works only on TV model amp The Maintenance Control feature is available only for the displays whose power status is ON a Maintenance N Video Wall 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Fie Remocon Safety Lock Port Selection Help Select Alt Chear Ali Video Vall Video Wall ON OFF Bgo E Harizti al werical E J Format Full Natural 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing Select a mode from Screen divider Select a display from Display Selection The place will be
42. when viewing movies Adjusting the LCD Display 4 Speech Selects Speech when watching a show that is mostly dialog i e news 5 Custom Selects Custom if you want to adjust the settings according to your personal preferen ces Custom The sound settings can be adjusted to suit your personal preferences Note e You can hear the sound even when sound value is set to 0 e If you adjust sound using Custom function Mode will turn to Custom mode Bass aaa Emphasizes low frequency audio Treble Oo 1 Emphasizes high frequency audio Balance ee Allows you to Adjusts the sound balance between the left and right speakers Auto Volume ba K4 1 YUN Mode Custom Custom SRS TS XT On Sound Select Main Speaker Select Internal Reduces the difference in volume control between broadcasters 1 Off 2 On Adjusting the LCD Display SRS TS XT Mode Custom Custom Auto Volume Off Sound Select On Speaker Select Internal SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround XT delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On Sound Select AN T Mode Custom Custom Auto Volume Off SRS TS XT Fai Speaker Select Sub Selects either Main or Sub when PIP is On
43. 0 7267 0 800 777 08 1 800 682 3180 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 42 27 5755 0810 SAMSUNG 7267864 E 0 07 min 02 201 24 18 http www samsung com ca_fr French http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com be Dutch BOSNIA BULGARIA CROATIA CZECH DENMARK FINLAND FRANCE GERMANY CYPRUS GREECE HUNGARY ITALIA KOSOVO LUXEMBURG MACEDONIA MONTENEGRO NETHERLANDS NORWAY POLAND PORTUGAL RUMANIA SERBIA SLOVAKIA SPAIN SWEDEN Appendix Europe http www samsung com be fr French 05 133 1999 http www samsung com 07001 33 11 http www samsung com 062 SAMSUNG 062 726 http www samsung com 7864 800 SAMSUNG hittp Awww samsung com 800 726786 samsung Electronics Czech and Slovak s ro Oasis Horeng Sokokwska 394 17 180 00 Praha 8 70 70 19 70 030 6227 515 01 48 63 00 00 01805 SAMSUNG hittp www samsung com 726 7864 0 14 Min From landline 8009 4000 From
44. 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 848 x 480 31 020 60 000 33 750 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 768 47 776 59 870 79 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1366 x 768 47 712 59 790 85 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1920 x 1080 67 500 60 000 148 500 Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency 2 th P a Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Dis
45. Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Introduction Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall Mong K j i ee ja ma pI i Fi Ng AA a NG bg tal nn a bal lt ib 3 4 i h bo T i i Pi ai a Po J ng E i ae a r ty a E Es a ila ng a zi There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right 2 Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length Ti HA LU a a A TO a 1 t mae y Gi Lg Introduction A Length between the two locking holes 3 Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A A i Laa j a si a pi z ligt if Pol a ka a er a Ng z Ks p P Telo a e at LES ee 7 Jl k nag CA HP Al d N AN a Sy ba t nG YU ng Gr HG a
46. CD Display settings In most cases the LCD Display installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 220 800 Note Design and specifications are subject to change without prior notice Note Class A Information Communication equipment for industrial use Specifications Attention dealers and users This device is registered for EMC requirements for industrial use Class A and can be used in areas other than general households USA Only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display O
47. FF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature PowerSaver When used as a Network monitor State Normal Opera Power saving Power off tion mode Power switch Power Indicator On Blinking Off Power Con 700TSn 2 750 watts Less than 5 watts 0 watts sumption 820TSn 2 920 watts Less than 5 watts less than0 watts Note e The actual power consumption may be different from the indicated power consumption above if the system conditions or settings are changed e To stop any power consumption turn off the switch or disconnect the power cable on the back Be sure to disconnect the power if you intend to stay away from home for many hours Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC
48. LCD Display 13 MTS DUAL 14 E ENTER PRE CH 15 K MUTE 16 w CHIP A 18 I MENU 19 3 RETURN 20 gt ll EXIT 21 MagiclInfo Mechanical Layout 700TSn 2 Mechanical Layout Introduction MTS You can select MTS Multichannel Television Stereo mode Audio Type MTS S_ Mode Default FM Stereo Mono Mono Manual Stereo Mono Stereo Change SAP Mono e SAP Mono DUAL STEREO MONO DUAL DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV This function does not work for this LCD Display This button is used to return to the immediately previous channel This function does not work for this LCD Display Pauses mutes the audio output temporarily This is dis played on the lower left corner of the screen The audio comes back on if MUTE or VOL is pressed in the Mute mode In TV mode selects TV channels This function does not work for this LCD Display Selects the TV mode directly This function does not work for this LCD Display Opens the on screen menu and exits from the menu or closes the adjustment menu Returns to the previous menu Exits from the menu screen Magiclnfo Quick Launch Button Introduction 1557 6 Opening Area 1688 0 154 0 989 0 879 6 Opening Area z o o o oo co tod Pemove the stand 721 8 Remote control LCD Di
49. MI IN Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI ca ble Up to HDMI cable 1 0 can be supported 12 INTERNAL EXTERNAL Switch Allows you to select the touch screen mode Flip the switch to the left to use the Touch Screen function in Magiclnfo mode and flip it to the right to use the Touch Screen func tion in PC mode Note To use the touch screen function in PC mode the touch screen program must be in stalled onto your PC and the product must be connected to the PC using USB Note Introduction When the power is off adjust the direction of the switch that controls the touchscreen 13 USB Connection Terminal To use the touch screen function in PC mode connect the product to your PC using the USB cable RGB OUT LAN LAN Connection Terminal USB1 USB2 USB Connection Terminal Keyboard Mouse Mass Storage Device Compatible See Connecting Cables for further information regarding cable connections Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with the frequen Cy SAMSUNG 86909902090 900 power Oorr Number Buttons DEL GUIDE button VOL SOURCE I D MENU TOOLS Up Down Left Right buttons 1 INFO COLOR BUTTONS
50. Magiclnfo PIPL Note Available Modes PIP ON When external AV devices such as VCRs or DVDs are connected to the LCD Display PIP allows you to watch video from those devices in a small window super imposed on the PC Video signal Off On Note If you select LL LO B in Size Position and Transparency will not be activated PIP Source Swap Adjusting the LCD Display Turns the PIP Screen Off On e Off e On PIP On Swap AN Size HOMI Position Transparency Medium Selects the input source for the PIP e PC DVI AV HDMI DVI AV PC e Component PC e HDMI PC PIP PIP Source E swa a ed r Size Position Transparency Medium Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window Adjusting the LCD Display Size PIP Source Swap Position Transparency Changes the Size of the PIP window Position PIP Source Swap Size Transparency Changes the Position of the PIP window Transparency PIP Source swap Size Position Adjusts the Transparency of PIP windows High e Medium e Low e Opaque Note e PIP turns off when the LCD Display is switched to an external source e For PC and DVI this is deactivated if the cable is disconnected Adjusting the LCD Display Edit Name J fs 1 PC DVI AV Component HDMI masagad
51. S XT SRS TS XT Sound ON OFF of the selected display Sound Select Select either Main or Sub when PIP is On 3 The Input source of Magic nfo works only on Magici nfo model The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed I mage Lock 1 Click Settings of the main icons and the Settings Control screen appears ama PA sila Disolay Contra File Remocon Safety Lock Port Selection Help SelectAll Clear All Auto Adjustment Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal amp The Input source of Magic nfo works only on Magici nfo model k The Input source of TV works only on TV model Settings Control is available only for the displays for which the power status is ON zx Maintenance Na Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen ge Multiple Display Control File Remocon Safety Lock Port Selection Help Select All Clear All Lamp Control Hous fevri salo KAP Apply O Manual Lamp Control
52. Service Center to buy optional items Connecting to Other devices e AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connections e The LCD Display s configuration at the back may vary slightly depending on the LCD Display model Connecting AV Devices 1 Connect the Video and R AUDIO L port of the DVD VCR or DTV Set Top Box to the Video and R AUDIO L LCD Display 2 Play the DVD VCR or Camcorder with a DVD disc or tape inserted 3 Select AV using the SOURCE Connecting to a Camcorder 1 Locate the AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV COMPONENT AUDIO IN R AUDIO L on the LCD Display 2 Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the LCD Display 3 Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control 4 Then start the Camcorder with a tape inserted Connections Note The audio video cables shown here are usually included with a Camcorder If not check your local electronics store If your camcorder is stereo you need to connect a set of two cables Connecti
53. ble when the power is turned off Pixel Shift Pixel Shift Horizontal Vertical Time 4 min To prevent after images on the screen you can use this function have pixels move on the LCD in the horizontal or vertical direction 1 Off 2 On Horizontal PEENI Pixel Shift On aa 4 Vertical 4 Time 4 min Sets how many pixels the screen moves horizontally Five adjustment levels O 1 2 3 and 4 Vertical NG Stiifi Pixel Shift On Horizontal NG a F 4 v Time 4 min Sets how many pixels the screen moves vertically Five adjustment levels O 1 2 3 and 4 Adjusting the LCD Display Time PG Shift Pixel Shift On Horizontal d Vertical 4 Set the time interval for performing the horizontal or vertical movement respectively Timer Timer i Tirrtsr OF Mode loo Period 1 Hour Time 10 sec You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish 1 Off 2 On Mode Timer On Period Time You can change the Safety Screen Type 1 Scroll 2 Bar 3 Eraser Adjusting the LCD Display Period Timer M 0 de Time Use this function to set the execution period for each mode set in the timer Time Timer Mode Penod Within the set period of time specify a time for execution e Mode Scroll 1 5 sec e Mode Bar Eraser
54. control and set The setting for the PC Serial Port can change The original value is COM1 Click Select all or Clear to select or clear all displays Use Grid to view brief information on selected display Select a display from Display Selection Di CA pk AA Se Use Control Tools to control displays lt Note gt The remote control Enable Disable function operates whether or not the power is On Off and this applies to all displays connected to the MDC However regardless of the status at the time the MDC is shut down the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed Port Selection a Multiple Display Contra File Remocon Safety Lock Port Salac tion Help i Busy imago Saa On Tma Tee 16 9 m m Power On a Power Off i ee 1 The Multiple Display Control is originally set to COM1 2 If any port other than COM1 is used COM1 through COM4 can be selected in the Port Selection Menu 3 If the exact port name that is connected to the LCD Display using a serial cable is not selected communication will be unavailable 4 The selected port is stored in the program and used for the next program as well a i Power Control 1 Click Power Control of the main icons and the Power Control screen appears Remocon Saloty Lock Port Selection Help Select fut Clear Ali Busy a e Power On Power Off Volume Ye Info Grid shows
55. d using a combination of characters and background color with large dif ference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey ozas 20 oe o Change the characters color periodically e Use Bright colors with little difference in luminance Cycle Change the characters color and background color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME O2Z348 20 30 e Every 30 minutes change the characters with movement mb FLIGHT TIME FLIGHT TIME O2348 20 30 0348 20 30 Stepi Step3 e Have the images and logo periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours In use e The best way to protect your monitor from Image retention is to turn the Power off or set your PC or System to operate a Screen Saver program when you are not using it If these guidelines are not followed it may affect your warranty Apply the Screen Scroll function on Product e Apply the Screen Scroll function Symptom Horizontal Bar with Black Color move up and down Horizontal Bar wath Black color r Lin iI Eii OZ348 20 30 UA102 21 10 Note Please check CD s User Guide at OSD Function some model s will not availa ble Information o Apply the Screen Pixel function on Product Apply the Screen Pixel function Symptom Dot
56. er On time for the screen Caution Set the Power On time to be longer to avoid overvoltage OSD Rotation LAXA M CECL 4 More Power On Adjustment OSD Rotate 1 Landscape 2 Portrait Reset Reverts the product settings to factory defaults The Reset function is only available when PC DVI is being used Image Reset L Color Reset Image Reset OK Cancel Adjusting the LCD Display Note Available in PC mode only The Reset function is not available when Video Wall is On Color Reset ba X4 pF Image Reset NG Color Reset er G OK Cancel Multi Control Available Modes pc DVI e Ev av 8 Component gt HDMI M Magicinfo Multi Control Assigns an individual ID to the SET ID Setup ID Input e ID Setup Assigns distinctive IDs to the SET e ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter setting becomes activated MagiclInfo Adjusting the LCD Display Available Modes PC DVI EJ AV 4 Component HDMI M Magiclnfo Note The remote control can be used to select Magiclnfo However it is recommended to use a separate USB keyboard to utilize Magicinfo fully For Magiclnfo in Device mode moving external devices while booting may cause errors Set up external devices only if the LCD Display turns on Do not unplug the LAN cable used for the network ex video display Otherwise
57. es You can even view the screen at a resolution of 1920 x 1080 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time If the resolution is more than 85Hz you will see the black screen because the LCD Display does not support over 85Hz Not Optimum Mode Recommended Mode 1570x1080 60Hz Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting e Do not use benzene thinner or other flammable sub stances 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel e Never use acetone benzene or thinner sla They may cause flaws or deformation of the screen z surface e The user is responsible for any damage caused by using these substances Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the LCD Display to become blank have poor coloring become noisy etc In this case first check the source of the prob lem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the compute
58. f these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please sep arate batteries from other types of waste and recycle them through your local free battery return system Correct disposal of batteries in this product K Applicable in the European Union and other European countries with separate battery return systems The marking on the battery manual or packaging indicates that the bat tery in this product should not be disposed of with other household waste Where marked the chemical symbols Hg Cd or Pb indicate that the bat tery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 The battery incorporated in this product is not user replaceable For in formation on its replacement please contact your service provider Do not attempt to remove the battery or dispose it in a fire Do not disas semble crush or puncture the battery If you intend to discard the product the waste collection site will take the appropriate measures for the recycling and treatment of the product including the battery Appendix Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this ma terial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registe
59. g steps remove MDC Select Setting Control Panel on the Start menu and then double click Add Delete a pro gram Select MDC from the list and then click the Add Delete button F Using MDC Dis D ay i MG tip le displ ay ontre JI MDC S ystem Introduction RS 232C OUT A5 232C In RA5 232C In o gt Es R5 232C Out RS 232C Out RS 232C Out A Multiple Display Control MDC is an application allowing various displays to be easily and simultaneously operated on a PC RS 232C a standard of serial communication is used for the communication between a PC and a display Therefore a serial cable should be connected between the serial port on a PC and the serial port on a display Main Screen Click Start gt Program gt Samsung gt MDC System to start the program Select a set to see the volume of the selected set within the slider i Multiple oO Lontrol o O rie eanecen Say toci Por Sotto Power On Power Off vin L ees aj GB Main Icons O Select Button a Remocon O I nfo Grid Safety Lock E8 Display Selection O Port Selection O Control Tools 1 Use the main icons to switch into each screen 2 Allows you to enable or disable the remote control signal receiving function of the display unit bai Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote
60. he Double Click area The double click function is available in the Click on touch Click on Release and Mouse Emulation modes Enable Delay Touch After this function is enabled high speed touch or scratch on the screen becomes inef fective This function is very effective to maintain a steady touch on a specified area for a certain amount of time It can be used for banking and industrial control applications such as ATM and switches on industrial equipment it is available in Click on touch and Click on Release modes The Delay Touch Setting properties can be set selectively The higher the value unit millisecond the longer the touch delay time the Area value is used to adjust the effective touch area of the touch panel on which the finger stays The higher the value unit pixel the wider the effective area Drag Delay This function allows a drag event to occur only after a certain predefined drag delay time has elapsed If the object cannot be precisely selected or the cursor jitters adjust the value of Drag to delay dragging It is displayed in milliseconds Note According to the hardware statuses and external factors you can flexibly set related param eters to achieve the best performance Refer to the attachment later in this manual Serial port Settings 1 After installing the driver of the serial port is finished choose Start All Pro grams IRTOUCHSYSTEMS
61. ick the Open button then click OK button 9 Choose your monitor model and click the Next button Then click Next button 10 Click the Finish button then the Close button Using the Software If you can see the Digital Signature Not Found window then click the Yes button Then click the Finish button and the Close button Microsoft Windows Millennium Operating System 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Select the Monitor tab 5 Click the Change button in the Monitor Type area 6 Choose Specify the location of the driver 7 Choose Display a list of all the driver in a specific location then click Next button 8 Click the Have Disk button 9 Specify A D driver then click OK button 10 Select Show all devices and choose the monitor that corresponds to the one you con nected to your computer and click OK 11 Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Selecta mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4
62. ilure to do so may cause serious damage to your monitor O Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or damage the product L When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out e Otherwise it may fall or cause personal injury Safety Instructions e Use a cabinet or rack of a size appropriate to the product DO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD a UCT e Otherwise this may result in fire L Keep heating appliances as far away from the power cord or the product as possible e Otherwise this may result in electric shock or fire 3 Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the in ternal temperature When putting the product down make sure to put it down softly ye Otherwise this may result in damage to the screen display 3 Do not place the front of the product on the floor e Otherwise this may result in damage to the screen display 3 Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount 4 4 Install your product in a well ventilated location Ensure that A there
63. ince the product housing is easily scratched make sure to use the specified cloth only L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunc tion L The product is a high voltage product Do not disassemble re pair or modify the product yourself e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and con tact a Service Center e Otherwise this may result in electric shock or fire 3 Do not place this product in a location exposed to moisture dust smoke water or in a Car e Otherwise this may result in electric shock or fire Safety Instructions G L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire Pa L If thunder or lightning is occurring do not touch the power cord 52 or antenna cable Sy eal hi e Otherwise this may result in electric shock or fire L Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to
64. ions Connecting the Touch Screen USB hub Magicinfo PC Ara Note To use the touch screen function in Magiclnfo mode flip the toggle switch to the left To use the touch screen function in PC mode connect the USB port on your PC to the product using the USB cable and then flip the toggle switch to the right Connecting a LAN Cable cic Connect the LAN cable Connecting a USB device Connections ay P pu et Pia LESBIAN eR AD EE Aa _ NI O NI You can connect USB devices such as a mouse or keyboard Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the oper ating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button a SAMSUNG monitor installer Saal the moadorahich you wari bo nabali 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation
65. is a clearance of more than 4 inches 10 cm from the wall gt is 7 e Otherwise it may result in fire due to an increase in the internal Bin temperature M D Ensure that the packaging vinyl is kept away from children NG 14 e Otherwise it may result in serious harm suffocation if children O A playwithit L If the height of your monitor is adjustable do not place any ob ject or part of your body on the stand when lowering it GB e This may cause damage to the product or the person carrying it Clean Aw When cleaning the monitor case or the surface of the TFT LCD screen N wipe with a slightly moistened soft cloth Others Safety Instructions 3 Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off L When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire 3 When cleaning the product disconnect the power cord and clean it with a soft dry cloth e Do not use chemicals such as wax benzene alcohol thinner mosquito repellant lubricant or cleaner These may change the appearance of the product surface and peel off the indica tion labels on the product 3 S
66. ith separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic ac cessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product K Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the bat teries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical sym bols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed o
67. justs the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed ily NN uy i Settings KA Audio 1 Click Settings of the main icons and the Settings Control screen appears i Multiple Display Control File Remocon Safety Lock Port Selection Help Setect All Clear All All Inputs i N e a EE SAS TS XT ON Sound Select Main Je Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM Audio Controls audio settings for all input sources Bass Adjusts Bass of the selected display Treble Adjusts Treble of the selected display Balance Adjusts Balance of the selected display SRS T
68. l PIP Size can be controlled with turning on the LCD Display power NG PIP PIP Source All Inputs OFF Large small Double 1 Double 7 Double 3 O L Click PIP of the main icons and the PIP control screen appears fie Multiple Display Cont Fie Remocon Safety Lock Port Selection Help Select All Clear All Busy PIP Source All Inputs AW 5 S Video O Component HDMI Je Info Grid shows some basic information necessary to PIP Source Control 1 PIP Source PIP Source can be controlled with turning on the LCD Display power PC Changes the source of the PIP of the selected display to PC BNC Changes the source of the PIP of the selected display to BNC DVI Changes the source of the PIP of the selected display to DVI AV Changes the source of the PIP of the selected display to AV S Video Changes the source of the PIP of the selected display to S Video Component Changes the source of the PIP of the selected display to Component HDMI Changes the source of the PIP of the selected display to HDMI Note Some of the PIP Sources may not be available for selection depending on the input source type of the Main Screen amp The Input source of Magic nfo works only on Magici nfo model k The PIP Control feature is available only for the displays whose power status is ON and the PI P function is set to ON ilo Settings Picture 1 Click
69. landline 80111 SAM http www samsung com SUNG 7267864 http www samsung com http www samsung com http www samsung com http www samsung com From landline amp mobile 30 210 6897691 06 80 SAMSUNG 726 7864 http www samsung com 800 SAMSUNG 726 7864 381 0113216899 http www samsung com http www samsung com 261 03 710 http www samsung com 023 207 777 http www samsung com 020 405 888 http www samsung com 0900 SAMSUNG 0900 7267864 0 10 Min 815 56 480 http www samsung com 0 801 1SAMSUNG 1 72 678 _http Awww samsung com http www samsung com 48 22 607 93 33 808 20 SAMSUNG 808 20 http www samsung com 7267 From landline 08010 SAM SUNG 7267864 http www samsung com From landline 4 mobile 40 21 206 01 10 0700 SAMSUNG 0700 726 http www samsung com 7864 0800 SAMSUNG 0800 726 http www samsung com 786 902 1 SAMSUNG 902 172 http www samsung com 678 0771 726 7864 SAMSUNG http www samsung com Appendix Europe SWITZERLAND 0848 SAMSUNG 7267864 http www samsung com ch CHF 0 08 min http www samsung com ch_fr French U K 0330 SAMSUNG 7267864 http www samsung com EIRE 0818 717100 http www samsung com LITHUANIA 8 800 77777 http www samsung com LATVIA 8000 7267 http www samsung com ESTONIA 800 7267 http www samsung com TURKEY 444 77 11 http www samsung com CIS RUSSIA 8 800 555 55 55 http www samsung c
70. lay gt Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual How can clean the outer case LCD Panel Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display How can play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible Troubleshooting Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer Specifications General General Model Name SyncMaster 700TSn 2 820TSn 2 LCD Panel Size SyncMaster 70 inches 177 cm 700TSn 2 SyncMaster 82 inches 207 cm 820TSn 2 Display area SyncMaster 1549 44 mm H x 871 56 mm V 700TSn 2 SyncMaster 1805 76 mm H x 1015 74 mm V 820TSn 2 Pixel Pitch SyncMaster 0 807 mm H x 0 807 mm V 700TSn 2 SyncMaster 0 9405 mm H x 0 9405 mm V 820TSn 2 Synchronization Horizontal 30 81 kHz Vertical 56 85 Hz Display Color 16 7 M Resolution Optimum resolu 1920 x 1080 60 Hz tion Maximum resolu 1920 x 1080 60 Hz tion Input Signal Terminated RGB Analog DVI Digital
71. lter upahan Hee dies rol back ko tne previously mababad cadet Umm Duke id Phag ardi Fiap Moewtor Devica hps Marilesz Fl el acinar Ghardand mon o lipas Location on 20 Piggies Ik Diviga Laud UG AA IP pau ane hasang Pah Iha dawa chock Trouhieshoct la basil ih A cabbies root Device ung Ulsa iha Gee erate then click Next button Hardware Update Wizard Welcome to the Hardware Update wizard Thin wese helpa pou naal solas bor Piia arad Plage Mordi If pou hades come wilh an mabalian CO or Roney disk inih ik nee EF attest cho poa aar ha arad ID do CC ball E a Te e a a rta hom a kal o pek kapa Dik Next lo continue L Cmo then click Next and then click Have disk Using the Software Hardware Update Wizard hardware Update Wizard Fieste chorta yo poach and incl alain opines Gv Pr Task the dovide dive pou want bo install le this handaan D esch iy He ber drva in these locate emi Skee tho mamulat ard madal of pour haka devace one ihan ckek Hasi Il you hyre a dak that panissa tha diss pouant lo nala obok Hara Dik Ulee ha chak basa baka ka kmi ca pard the daiya sanch vadh cludes kea pathi mrd iemiabks mecha The beth dmo ound wal be nalaled Eire companba Federaal Hidi W Pug ered Pap Honto Eom readh vall chesse the drva ho ball Choose the option ko select the devane draa homa bet Wide does mot guarentee hat Uh dan po
72. mpleting the Hardware Update Wirand The vazad kart irha mabaling the sofiera bat Samsung kaa Drem Dalsi Ta vira datali abu Hho dre files Ugdma Dirar To iiaia thee rea fo thee cee ee taka if the dosa kada alter upang iho cree roll LI L Bo Back Drin back bo iha parvicus iniballsd civa ba LU rer ate Tauminaal the dna bihari 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow the next steps 5 Click Driver and then click on Update Driver then click on the Next button 6 Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk 7 Click the Browse button then choose A D Driver 8 Cl
73. ng Using a DVI Cable 1 Connect between the DVI OUT port on the LCD Display and the input port on another monitor using a DVI cable 2 Connect between the AUDIO OUT port on the LCD Display and the audio input port on another monitor using a stereo cable 3 Select DVI using the SOURCE button on the front of the LCD Display or on the remote control re Note DVI OUT does not support HDCP Connecting Using a HDMI Cable 1 Connect input devices such as a Blu Ray DVD player to the HDMI IN terminal of the LCD Display using an HDMI cable Connections 2 Select HDMI using the SOURCE button on the front of the LCD Display or on the remote control Note In HDMI mode only PCM format audio is supported Connecting Using a DVI to HDMI Cable NICOWPOMENT AUDIO IN auc m Dv OUT 1 Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCD Display using a DVI to HDMI cable 2 Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the DVI RGB HDMI AUDIO IN terminal of the LCD Display 3 Select HDMI using the SOURCE button on the front of the LCD Display or on the remote control Connecting to an Audio System O r g 1 Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT on LCD Display Connect
74. nstallation Safety Instructions 3 Ensure that the power plug is plugged into the power outlet firmly and correctly e Otherwise this may result in fire L Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire LJ Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating 3 Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e Otherwise this may cause electric shock or fire L Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the prod uct Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high hu midity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Fa
75. o d ia a I ap fk al a IrTouch Screen Control Panel oF Administrator ki Internet Internet Explorer we E mail TA Activate Windows Set Program Access and Defauks W Windows Catalog tb Windows Update g internet Explorer ng sa EH Outlook Express y Remoke Assistance r Files and Settings Tr TE Wizard W Paint Windows Media Player eC Geli Windows Movie Maker i Start 5 25 1PG Paint General Control Panel menu 1 The control panel provides the function of USB Serial IR touchscreens matching with related monitors It supports the compatibility of multi touchscreens on a single PC This window shows the basic information of the touchscreen and calibration If several touch screens are mounted on the PC and the status is set to Multi screens display use the Select Monitor menu to choose the monitor related to each touch screen before cali bration otherwise the touchscreen will not work Steps for setting up multi touchscreens on a single PC The button mark will appear in the center of each monitor screen in a master slave sequence operated by the program after you click Select Monitor If that Using the Software is the case then click the center of the button mark to acknowledge the mounted touchscreen If there is no information about the touchscreen displayed on the monitor press ESC on the keyboard or wait for 15 seconds The program will pass the current monitor
76. om GEORGIA 8 800 555 555 http www samsung com ARMENIA 0 800 05 555 http www samsung com AZERBAIJAN 088 55 55 555 http www samsung com KAZAKHSTAN 8 10 800 500 55 500 GSM http www samsung com 7799 UZBEKISTAN 8 10 800 500 55 500 http www samsung com KYRGYZSTAN 00 800 500 55 500 http www samsung com TADJIKISTAN 8 10 800 500 55 500 http www samsung com MONGOLIA http www samsung com UKRAINE 0 800 502 000 http www samsung com ua http www samsung com ua ru BELARUS 810 800 500 55 500 http www samsung com MOLDOVA 00 800 500 55 500 http www samsung com Asia Pacific AUSTRALIA 1300 362 603 http www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 http www samsung com 786 CHINA 400 810 5858 http www samsung com HONG KONG 852 3698 4698 http www samsung com hk http www samsung com hk en INDIA 1800 1100 11 http www samsung com 3030 8282 1800 3000 8282 1800 266 8282 INDONESIA 0800 112 8888 http www samsung com 021 5699 7777 Appendix Asia Pacific JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com PHILIPPINES 1 800 10 SAMSUNG http www samsung com 726 7864 for PLDT 1 800 3 SAMSUNG 726 7864 for Digitel 1 800 8 SAMSUNG 726 7864 for Globe 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com THAILAND 1800 29 3232 http www samsung com 02 689 3232 TAIWAN 0800 329 999 http www samsung com 0266 026 0666 VIETNAM 1 800 588 889 http www
77. ommit the system is restarted MagiclInfo 1 Select Application step 1 Magicinfo Setup Wizard v 1 03 Select Application step select Magicinfo Pro LAN Ah based versioni MaglcInfo Web based version Click Lent Finish Cancel You can select an Application to be executed in your computer when Windows starts 2 Select TCP IP step 2 fe Magiclnfo Setup Wizard v 1 03 GA Select TCP IP step 2 pike Obtain an IP address automatically O luput fe Use the following IP address p IP address H subnet mask oo 0 Default gateway r k Use the following ONS server a Prefered DNS server Alternate DNS server MesN Finish Cancel In step 2 of Magiclnfo Setup Wizard you don t have to go to Network Setting on the desktop to make your settings for TCP IP You just do that at step 2 of Magiclnfo installation 3 Select Language step 3 Adjusting the LCD Display Magicinfo Setup Wizard v 1 03 e Select Language step 3 Select the language you wani to install on ihe system for menus and dialogs Current Language Korean When using multiple languages you can choose and set a specific language among them 4 Select Screen Type step 4 ie Magicinfo Setup Wizard v1 09 Select Screen Type step 4 bSetect BacktB jf Next h gt y Finish Cancel You can select which rotation type will be applied to your device
78. play Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1920 x 1080 e Vertical frequency refresh rate 60 Hz TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 6 220 800 When cleaning the monitor and the panel outside please apply the recom mended small amount of cleaner by using a soft cloth to polish Rub softly when cleaning the LCD area lf excessive force is applied you may stain it E3 If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function o When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the pic
79. play If any items are missing contact your dealer Contact a local dealer to buy optional items Checking the Contents of the Package Lift up the package box by Check the contents of the Remove the Styrofoam holding the grooves on package and vinyl cover both sides of the package box Note e After unpacking the package make sure to check the contents of the package e Store the packaging box in case you need to move the Product later e f any items are missing contact your dealer e Contact a local dealer to purchase optional items Introduction Unpacking LCD Display Manuals Quick Setup Guide Warranty Card User Manual Not available in all loca tions o Magiclnfo Software DVD Cables GI Power Cord D Sub Cable Others Tete Remote Control Batteries AAA X 2 BP59 00138A Not available in all loca tions Introduction Sold separately RGB to BNC Cable DVI Cable LAN Cable Wall Mount KIT Your LCD Display Front MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Navigate buttons Up Down buttons Moves from one menu item to another vertically or adjusts selected menu values Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values When OSD is not on the screen press the button to adjus
80. ponding anchor holes and insert and tighten the 11 screws A Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product i Db A Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket Introduction ja A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 2o 8 l a T j Pi NP aj LE 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15
81. r 2 Check if the computer beeps more than 3 times when booting If it does request service 3 Ifyou installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 50 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel gt System gt Device Admin istrator and then reboot the computer to reinstall the Adaptor video driver Check List Note e The following table lists possible problems and their solutions Before calling for assis tance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer e For more network related information refer to the Magiclnfo Troubleshooting section Problems related to the Installation PC Mode Note Problems related to the LCD Display installation and their solutions are listed Q The LCD Display screen flickers A Troubleshooting Check if the signal cable between the computer and the LCD Display is securely con nected Refer to Connecting a Computer Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed Q
82. r works involving heavy text 4 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu Custom LIT By using the on screen menus the contrast and brightness can be changed to your personal preference 1 Contrast Adjusts the Contrast 2 Brightness Adjusts the Brightness 3 Sharpness Adjusts the Sharpness Note By adjusting the picture using the Custom function MagicBright will change to Custom mode Not available when Dynamic Contrast is set to On Adjusting the LCD Display Color Tone Li Gat MagicBrght Entertain Custom Wa Color Control Cool Image Lock Auto Adjustment Warm Custom More The color tones can be changed 1 Off 2 Cool 3 Normal 4 Warm 5 Custom Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Not available when Dynamic Contrast is set to On Color Control LI Adjusts individual Red Green Blue color balance 1 Red a ee 2 Green a lee 3 Blue a e Note If you adjust the picture by using the Color Control function Color Tone will turn to the Custom mode Not available when Dynamic Contrast is set to On Color Temp LIN
83. racket SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product be F I rm i f Ulat i di Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall Introduction There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length gt 8 4 la BST pine Ju ng SN Pe S i TA wii i Bs A Length between the two locking holes Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corres
84. red trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners TruSurround XT SRS and the symbol are trademarks of SRS SISO Labs Inc Masuren AT TruSurround XT technology is incorporated under license from SRS Labs Inc CALIFORNIA USA ONLY Applicable for networking models only This Perchlorate warning applies only to primary CR Manganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchloate Material special handling may apply See www dtsc ca govf hazardouswaste perchlorate
85. s deactivated it means the configuration for your monitor is completed The monitor can be used as is Using the Software If the message Windows needs is displayed as shown in the figure below click Continue Mirae Tait a Ganang PrP Mantan Cire Morwhor Getir irh refresh rate bo Heriz a Hae meti a ma mi Carol deeply Gearing Pia check boa dload yew fo akal damia exten Fat Sha monitor cannot Genuine comectiy Thee muy lead ko an usable Saga adio daneg hardware Note This monitor driver is under certifying MS logo and this installation will not damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Se ADA Gets BAN LE beret Camo mira aiai Peedi pote AA paie ee PEPP DE te To aa iha Greer piee Agr ha daga She daa Pa afer updates thee dir ral back NG ai imran related Per Chapin Ta pabata danica Tiuri Ba door Ara Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer CR M Hoey do ATAT gaith bo a Groene kor dreser poitean on pour Gomes Terst m deen eo n Ba m Farn Charth dutenai fee opiata drier sahai p Airgas md pee bye eee al Se dreri Me Der Ard hun ee ar ive F roande nobena E E Stal PN SA Paan j peck bom a lint of Grice driven on My computer Tina lel ar heen rede Bee Phe pede ee Po dee r aral all dover naga
86. s per sec ond this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Inter lace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to ex change information automatically This monitor follows the international standard VESA DDC for the Plug amp Play func tion The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1920 x 1080 this means the screen is composed of 1920 horizontal dots horizontal res olution and 1080 vertical lines vertical resolution Appendix Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries w
87. samsung com Middle East IRAN 021 8255 http www samsung com OMAN 800 SAMSUNG 726 7864 http www samsung com KUWAIT 183 2255 http www samsung com BAHRAIN 8000 4726 http www samsung com EGYPT 08000 726786 http www samsung com JORDAN 800 22273 http www samsung com MOROCCO 080 100 2255 http www samsung com SAUDI ARABIA 9200 21230 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com Africa CAMEROON 7095 0077 http www samsung com COTE D LVOIRE 8000 0077 http www samsung com GHANA 0800 10077 http www samsung com 0302 200077 KENYA 0800 724 000 http www samsung com NIGERIA 0800 726 7864 http www samsung com SENEGAL 800 00 0077 http www samsung com SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com TANZANIA 0685 88 99 00 http www samsung com UGANDA 0800 300 300 http www samsung com Terms Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The dis Vertical Frequency Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution Appendix tance between two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The fre quency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 time
88. set to Off k The Input source of TV works only on TV model k This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Picture PC 1 Click Settings of the main icons and the Settings Control screen appears paa Multiple Display Lanta File Remocon SafetyLock Porn Selection Help Select All Clear All Picture PC PC BNC DVI Ca Contrast Brightness Red Green Blue Color lone Color lemp 10000R Brightness Sensor Dynamic Contrast Je Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture PC Available only for PC BNC DVI 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NTSC 5 Green Adjusts green Color of the selected display Available only for NTSC 6 Blue Adjusts blue Color of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Ad
89. set up by pressing a number in the selected mode The MDC program supplied by Samsung supports up to 5x5 LCD Displayes 3 On Off Turns on off the Video Wall function of the selected display NI 4 Format The format can be selected to see a divided screen e Full e Natural amp You may not operate this function in Magicl nfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power status is ON Troubleshooting 1 The display you wish to control does not appear on the Power Control Info Grid Check the connection of RS232C Check if it is properly connected to the Com1 port Check the displays to see if any of the other displays connected have the same ID If more than one displays have the same ID those displays are not properly detected by the program due to data conflict Check if the Display Set ID is a number between 0 and 25 Adjust using the Display menu Note A Display Set ID must be a value between 0 and 25 2 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You can check this in Power Control Info Grid Check if you can change the input source of the display 3 The dialogue box appears repeatedly Check to see if the display you wish to control is selected 4 Both On Timer and Off Timer have been set but different time is showing
90. splay Head a Sa 1688 0 E PEN 1557 6 879 6 989 0 400 0 Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display Introduction e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions 1642 0 1004 0 00 0 WALL MOUNT HOLE SCREW HOLES M8 MACHINE SCREW o TOTAL 20EA 342 0 o L L 5 pa T lt x Dil 5 So Pai o Sis E B a o T ci T md a a on 342 0 900 0 STAND MOUNT HOLE 962 0 1004 0 1642 0 A Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product ies j xy Jel O NG Cc Ng c8 X VY Y W YE ay Wall
91. t it into sleep mode or use a moving screen saver Set a resolution and frequency appropriate to the product dd e Otherwise your eyesight may be damaged Safety Instructions L When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing 3 To avoid eyestrain do not sit too close to the product Take a rest for at least five 5 minutes after using the monitor for one 1 hour This reduces eye fatigue O Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e Ifyou use the product in a location exposed to vibrations it may damage the product and result in fire L When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire L Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage Do not place any heavy items or toys or confectionery such as cookies etc that ma
92. t volume ENTER button ENTER Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Selects the input source that an external device is connected to Rear Introduction PC gt DVI gt AV gt Component gt HDMI gt Magicinfo PIP button Push the PIP button to turn the PIP screen On Off e PC DVI AV HDMI e DVI AV PC e Component PC e HDMI PC Power button o Use this button for turning the LCD Display on and off Brightness Sensor Optional Automatically detects the surrounding brightness it accordingly rs Note This function is activated only on the models equipped with an auto bright ness sensor Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods Remote Control Sensor Aim the remote control towards this spot on the LCD Display Note For detailed information concerning cable connections refer to Connecting Cables under Setup The LCD Display s configuration at the back may vary slightly depending on the LCD Display model Introduction 1 POWER The power cord plugs into the LCD Display and the wall outlet power S W ON OFF O Switches the LCD Display On Off
93. tAtt Clear att Mm Busy i II PC Source PC BNC DWI 16 9 4 3 Ye Info Grid shows some basic information necessary to Image Size Control 1 E Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Info Grid displays only the displays whose Input Source is PC BNC DVI 4 PC Source When you click Image Size the PC Source tab first appear The Image Size Control button controls Image Size available for PC BNC DVI 5 Video Source Click the Video Source tab to control Image Size for respective Input Source The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model k Image Size Control is available only for the displays for which power status is ON 55 I mage Size TV AV S Video Component DVI HDCP HDMI DTV 1 Click Image Size of the main icons and the Image Size control screen appears pa Multiple Display Control File Remocon Safety Lock Port Selection Help Setect Alt Chear Al TAV S Video Component HOMI DTW Image Size Auto Wide Wide Zoom Zoom Zoom 1 Zoom 7 4 3 Screen Fit Wide Fit Screen Mode 16 9 Wide Zoom Zoom Ye Info Grid shows some basic information necessary to Image Size Control 1 Click the Video Source tab to adjust Image Size for TV AV S Video Component DVI HDCP HDMI DTV Click
94. the Brightness of the PIP window on the screen 3 Sharpness a a Adjusts the Sharpness of the PIP window on the screen 4 Color es a Adjusts the Color of the PIP window on the screen Enabled only when the PIP input is selected in AV HDMI or Component mode 5 Tint Adds a natural tone to the PIP window Note Enabled only when the PIP input is selected in AV HDMI or Component mode Oper ates only if the video signal is NTSC Dynamic Contrast L 8 atb Nore Film Mode Lamp Control Brightness Sensor Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Lamp Control Etta Adjusts the inverter lamp in order to reduce energy consumption Adjusting the LCD Display Note Not available when Dynamic Contrast is set to On Brightness Sensor L 8 Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to create optimum brightness 1 Off 2 On Sound Available Modes PC DVI e Elav 5 Component gt HDMI M Magicinfo Mode Standard Custom Music Auto Volume Movie SRS TS XT Speech Speaker Select intemal The LCD Display has a built in high fidelity stereo amplifier 1 Standard Selects Standard for the standard factory settings 2 Music Selects Music when watching music videos or concerts 3 Movie Selects Movie
95. ture when you need to be away from the monitor for an extended period of time PRODUCT INFORMATION Image Retention Free 5 What is Image Retention Image retention may not occur when a LCD panel is operated under normal con ditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO Black Matrix Color Filter Data Gate Bus Line TFT Pixel Electrode Storage Capacitor ITO Cs Power Off Screen Saver or Power Save Mode e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Set the Monitor to power off with the PC Display Properties Power Scheme e Use a Screen saver if possible Screen saver in one color or a moving image is recommended a Change the Color Information periodically Type 1 FLIGHT FLIGHT 02348 02348 UA102 UA102 Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes Information e Avoi
96. u hoo yell ba ha bagi makoh kor pour hare if That dira in cpt grad Cie 7 Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Hardward Update Wizard Selec the device divei you want bo inalali for thia harders rebel he manulacbusa s matallaion dak and then make sure that the conect dive i selected below a Sobol the mamulacturan ard modal of pa kanila denon ari thee dek Hei Il pen have a dak that ontana the daja yau mara bo mibali chek Hawa Dok Hodi Samsung sasa Copy manufacturer s fies Irom AA ee e aima vire diea prin ii imocel art 8 Ifyou can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The sofware pou are installing for this hasdware Samsung sawa has rod passed Windows Logo basing to wendy ws ompake writ einh KP Tell ma vaky the belir is iita Continuing yow installation of this software may impair mhon o destabilize the comect contact th hardware vendo for aofheware that has passed Windows Logo testing Note This monitor driver is under certifying MS logo and this installation will not damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click the OK button continually Using the Software Hardware Update Wizard ff Co
97. um check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q A The remote control buttons do not respond Check the polarities of the batteries Q amp A Pr PF PF O Troubleshooting Check if the batteries are empty Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity How can change the frequency The frequency can be changed by reconfiguring the video card Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows XP Set the resolution in the Control Panel gt Appearance and Themes gt Display gt Set tings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving function Windows XP Set the resolution in the Control Panel gt Appearance and Themes Display gt Screen Saver Set the function in the BIOS SET UP of the computer Refer to the Windows Computer Manual Windows ME 2000 Set the resolution at the Control Panel gt Disp
98. with Black Color move up and down FLIGHT TIME f OZ348 20 30 UA102 21 10 Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down a FLIGHT TIME Horizontal Bar OZ 20 3U UA102 21 10 ZF Note Please check CD s User Guide at OSD Function some model s will not availa ble o Apply the Screen Erasing function on Product Apply the Screen Erasing function Symptom 2 Vertical blocks move while erasing the display HT TIME OZ348 20 30 UA102 21 10 Note Please check CD s User Guide at OSD Function some model s will not availa ble Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINA BRAZIL BOLIVIA CHILE COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO TRINIDAD 8 TO BAGO VENEZUELA ALBANIA AUSTRIA BELGIUM North America 1 800 SAMSUNG 726 7864 http www samsung com 1 800 SAMSUNG 726 7864 http www samsung com ca 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 10 7260 800 SAMSUNG 726 7864 From mobile 02 482 82 00 01 8000112112 0 800 507 7267 1 800 751 2676 1 800 10 7267 800 6225 1 800 299 0013 800 27919267 1 800 234 7267 00 1800 5077267 80
99. y attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a lo cation that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately J When replacing the battery insert it with the right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid Safety Instructions Use only the specified standardized batteries and do not use a new battery and a used battery at the same time e Otherwise the batteries may be damaged or cause fire per sonal injury or damage due to a leakage of the internal liquid The batteries and rechargeable batteries are not ordinary re ma fuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for GB J recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery L Do not place the product in a location exposed to direct sunlight X or near any heat such as a fire or heater e This may reduce the lifetime of the product
100. ze functions are not available Video Wall does not operate in Magiclnfo mode Video Wall Format Horizontal Vertical Screen Divider Turns Off On the Video Wall function of the selected display Off On 1 Off 2 On Format Video Wall Horizontal Vertical Screen Divider p e The Format can be selected to see a divided screen Adjusting the LCD Display 1 Full Provides a full screen without any margins 2 Natural Displays a natural image with the original aspect ratio intact Horizontal Video Wall Format Vertical Screen Divider Sets how many parts the screen should be divided horizontally Five adjustment levels 1 2 3 4 and 5 Vertical Video Wall Format Horizon tal Screen Divider Sets how many parts the screen should be divided vertically Five adjustment levels 1 2 3 4 and 5 Screen Divider The screen can be divided into several images A number of screens can be selected with a different layout when dividing e Select a mode in Screen Divider e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode Adjusting the LCD Display Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time e The Safety Screen function scrolls the screen for the specified period of time e This function is not availa

Samsung 70" 700TSn-2Touchscreen LCD Display User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 70&quot; 700TSn-2Touchscreen LCD Display User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 70" 700TSn-2Touchscreen LCD Display User Manual