Home

Samsung HT-F9750W User Manual

1. ul HT F9750W 7 1CH Blu ray 3 Ome Entertainment user manual imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register SAMSUNG Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates dangerous CAUTION TO PREVENT ELECTRIC SHOCK This symbol indicates voltage inside the product that MATCH WIDE BLADE OF PLUG TO WIDE important instructions presents a risk of electric shock SLOT FULLY INSERT accompanying the product or personal injury WARNING CLASS 1 LASER PRODUCT e To reduce the risk of fire or electric shock do not KLASSE 1 LASER PRODUKT expose this appliance to rain or moisture LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CAUTION PRODUCTO L SER CLASE 1 e Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as CLASS 1 LASER PRODUCT aug shal be placed on the apparatus l This Compact Disc player is classified as a CLASS 1 e The Mains plug is used as a disconnect device and LASER product shall stay readily operable at any time Use of controls adjustments or performance of e This apparatus shall always be connected t
2. e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times Do not touch the power plug with a wet hand It can cause an electric shock Do not plug multiple electric devices into the same wall socket Overloading a socket can cause it to overheat resulting in a fire Maintenance of the Cabinet Before connecting other components to this product be sure to turn them off lf you move your product suddenly from a cold place to a warm place condensation may occur on the operating parts and lens and cause abnormal disc playback If this occurs unplug the product wait for two hours and then connect the plug to the power outlet Then insert the disc and try to play back again it O e f the product makes an abnormal noise or produces a burning smell or smoke turn off the power switch immediately and disconnect the power plug from the wall outlet Then contact the nearest customer service centre for technical assistance Do not use the product Using the product as it is may cause a fire or an electric shock Licence Q DOLBY Manufactured under licence TRUETE from Dolby PORIE a Dolby Pro Logic and DIGITAL PLUS the double D symbol are trademarks of Dolby Laboratories S dts uD Master Audio Essential S dts Neo Fusion Manufactured under a licence from U S Patent No
3. s 5 956 674 5 974 380 5 978 762 6 487 535 6 226 616 7 212 872 7 003 467 7 272 567 7 668 723 7 392 195 7 930 184 7 333 929 and 7 548 853 DTS DTS HD the Symbol and DTS or DTS HD and the Symbol together are registered trademarks amp DTS Neo Fusion is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved is a digital video format HD created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the Divx VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX Certified to play DivX video up to HD 1080p including premium content DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 ABOUT DIVX VIDEO DivX English 3 LO UOIVEWUOJU Ajayes Safety Information The terms HDMI and HDMI ft im High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licencing LLC in the United Sta
4. Lets you set the colour space format for the HDMI output to match the capabilities of the connected device TV monitor etc Audio Return Channel Lets you set the product to output video from the HDMI OUT jack with Deep Colour Deep Colour provides more accurate colour reproduction with greater colour depth Lets you improve picture quality when viewing DVDs Audio Digital Output Lets you adjust the following speaker settings and turn the test tone on and off so you can test the speakers JZ Level Lets you adjust the relative loudness of each speaker from 6db to 6db For example if you like deep bass you can increase the loudness of the subwoofer by 6db JZ Distance Lets you adjust the relative distance of each speaker from the listening position up to 9 meters The farther the distance the louder the speaker will be Test Tone Lets you run the Test Tone function so you can test your adjustments Setting Test Tone to On turns the Test Tone on Setting it to Off turns it off Dynamic Range Control The product automatically recognize the sound field optimized for your environment Downmixing Mode Lets you configure the Equaliser settings manually Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel Lets you select which speakers you want active either the TV s soeakers or the home cinema s speakers Lets you direct the
5. are encoded on the disc This function or certain languages may not be available e Some Blu ray Discs may allow you to select either the PCM or Dolby Digital audio soundtrack in English xipueddy 70 Selecting the Subtitle Language e Depending on the Blu ray Disc DVD you may be able to change the subtitle language in the Disc Menu Press the DISC MENU button e This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu ray Discs DVDs e Information about the main feature BONUSVIEW mode will also appear if the Blu ray Disc has a BONUSVIEW section e This function changes both the primary and secondary subtitles at the same time e The total number of primary and secondary subtitles are displayed respectively Playing JPEG files e You can t enlarge the subtitle and PG graphic in the full screen mode Media Play Dolby Pro Logic II Mode e Before selecting Dolby Pro Logic Il mode connect your external device to the AUDIO INPUT jacks L and R on the product If you connect to only one of the inputs L or R you cannot listen to surround sound Using the TOOLS button while playing pictures e f the system is connected to a BD Wise compliant TV that has set BD Wise to On the Picture Settings menu will not appear e The Background Music function will not work unless the music file and the photo file are located on the same storage media Also sound quality
6. audio or HDMI audio output to your It affects the optical and HDMI audio output when your product is connected to an AV receiver If you play MPEG audio soundtracks the audio signal outputs as PCM regardless of your Digital Output selections PCM or Bitstream Digital Output can be activated when Speaker Selection is set to TV Speaker BD Live Internet Connection The Internet connection may be restricted while you are using BD LIVE contents Anynet HDMI CEC Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV This function is not available if the HDMI cable does not support CEC If your Samsung TV has an Anynet logo then it supports the Anynet function BD Data Management In the external memory mode disc playback may be stopped if you disconnect the USB device in the middle of playback Only those USB devices formatted in the FAT file system DOS 8 3 volume label are supported We recommend you use USB devices that support USB 2 0 protocol with 4 MB sec or faster read write speed The Resume Play function may not work after you format the storage device The total memory available to BD Data Management may differ depending on the conditions DivX Video On Demand e For more information about DivX R VOD visit http vod divx com Front Display e You cannot change the brightness of the By button and the VOL button
7. the Home Cinema You can disconnect the Bluetooth device from the Home Cinema For instructions refer to the Bluetooth device s manual e When the Home Cinema is disconnected from the Bluetooth device the Home Cinema will display DISCONNECTED on the front display 40 English To disconnect the Home Cinema from the Bluetooth device Cinema to switch from BT to another mode or turn off the Home Cinema e Except when you disconnect the home cinema by changing functions the connected Bluetooth device will wait a certain time for a response from the Home Cinema before terminating the connection Disconnection time may differ depending on the Bluetooth device NOTES gt In Bluetooth connection mode the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters When the Bluetooth device comes back into effective range or you restart the Bluetooth device you have to pair the device and home cinema again to reconnect gt In Bluetooth mode the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes To reconnect the Bluetooth device turn off the screen saver and then connect the device To turn off the Screen saver press any button on the remote control the Volume button a number button etc Playing Photo Contents You can play photo contents located on a DVD USB mobile device or PC Using the Tools Menu Dur
8. wmv mp4 H 264 BP Dolby Digital 3gp MP HP LPCM VrO l 1920x1080 ADPCM mpg Motion JPEG WMV v7 v8 aaa IMA MS mpeg Microsoft MSMPEG4 v3 AAC ts MPEG 4 v3 1280x720 HE AAC ip WMA trp ee Meck Dolby Digital moy Video v7 v8 v9 Plus flv MPEG2 MPEG MP3 vob DTS Core svi MPEG1 mats m Limitations Even when a file is encoded by a supported codec listed above the file might not be played if its content is defective or corrupted Normal playback is not guaranteed if the file s container information is wrong or the file itself is corrupted Files having higher bit or frame rates than standard may stutter when played back The seek skip function is not available if the file s index table is damaged When you playback a file remotely through a network connection video playback may stutter depending on the network speed Some USB Digital camera devices may not be compatible with the product Video decoder Supports up to H 264 Level 4 1 except for FMO ASO RS Does not support VC1 AP L4 Except for WMV v7 v8 MSMPEG4 v3 MVC VP6 Below 1280 X 720 60 frame max Above 1280 X 720 30 frame max 8 English Does not support GMC 2 or higher Supports SVAF Top Bottom Side by Side Only Supports BD MVC Spec Only Audio decoder Supports WMA 10 Pro Up to 5 1 Does not support WMA lossless audio Supported ADPCM IMA MS Does not support ADPCM A Law u Low Does not support
9. Add an App to My Apps 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the J button 2 Select Edit My Apps and then press the button The Edit My Apps screen appears 3 Select a full colour app from the top row of apps and then press the button The full colour app icon appears in the My Apps area below and the app icon in the top row is grayed out NOTES gt Grayed out apps are already in My Apps 4 When you return to the Apps screen the app will appear in the My Apps area 148 English Delete an App from My Apps 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the J button 2 Select Edit My Apps and then press the button The Edit My Apps screen appears 3 Select the app you want to delete from My Apps press the J button and then press the AV lt gt buttons in the direction of the X The Remove from My Apps pop up appears Select Yes and then press the J button When you return to the Apps screen the app will have been removed from the My Apps area Move an App in My Apps 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the amp button 2 Select Edit My Apps and then press the button The Edit My Apps screen appears 3 Select the app you want to move in My Apps press the J button and then press the
10. Adjust the transparency of the menu box Anynet is a convenient function that offers linked operations with other Samsung products that have the Anynet feature and lets you control those products with one Samsung TV remote To operate this function you must connect this product to an Anynet Samsung TV using an HDMI cable If you want to use an Anynet HDMI CEC function please follow the instructions below 1 Connect the product to an Anynet HDMI CEC compliant Samsung TV using HDMI Cable 2 Set the Anynet HDMI CEC feature to On in both the TV and the product 3 Search for and then select the product in the TV s Anynet HDMI CEC list For more exact instructions see the Anynet section of the TV s user s manual DivX Video On Demand Remote Management Software Update Usage Mode Contact Samsung Reset View DivX VOD Registration Codes to purchase and play DivX VOD contents Support When activated lets Samsung Call Centre agents diagnose and fix problems with the product remotely Requires an active Internet connection Remote Management service might not be available in some countries For more information about the Software Update function see Upgrading Software on page 29 Lets you set the Use mode If you are using the home cinema at home always select Home Store is for retail display settings only Provides contact information for assistance with your
11. DIRECTION Button e Press AV lt P to move the cursor or select an item BD Wise e Press the button to activate the currently selected item or confirm a setting EXIT Button Press to exit the current menu Detailed Function Information Each Settings function menu item and individual option is explained in detail on screen To view an explanation use the A Y lt P buttons to select the function menu item or option The explanation will usually appear on the right of the screen A short description of each Settings function starts on this page Additional information on some of the functions is also in the Appendix of this manual Settings Menu Functions Display Movie Frame 24Fs Resolution This option outputs HDMI video at UHD resolution This is only available when Movie Frame is set to Auto NOTES gt To use this feature you must connect the product to a device that supports UHD resolution and you must have content that plays at 24Fs film speed UHD Output Set up the 3D related functions v 3D Blu ray Playback Mode Select whether to play a Blu ray Disc with 3D contents in 3D Mode If you move to the Home or Smart Hub Home menu while in 3D mode the product will switch to 2D automatically V Screen Size Enter the size of the TV attached to the product The product will automatically adjust the 3D output to the screen size of the TV Lets you adjust the output of the product
12. Done on the right side and then press the button The Rename popup reappears displaying the new name 6 Select OK and then press the button The folder is renamed 7 Select Close on the right side of the screen and then press the J button Delete Delete lets you delete apps and folders from the My Apps screen If there are apps in a folder both the folder and the apps are deleted together Delete removes apps permanently If you decide you want to use an app you deleted you will need to download it again 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the J button 2 Select Delete and then press the EJ button The Delete screen appears 3 Usethe AV lt P buttons to move to an app or folder and then press the button to select A check appears in the upper left corner of the app or folder you selected 4 To deselect an app press the button The check disappears 5 Repeat Step 3 to select additional apps or folders NOTES gt To select all the downloaded apps select Select All at the top right of the screen and then press the button To deselect all the apps select Deselect All at the top right of the screen and then press the button 6 After you have made all your selections select Delete at the top of the screen and then press the button The deleting pop up appears 7 Select Yes and then press the EJ button All the apps
13. Menus On the screen that lists the music files use the A V lt gt buttons to select View or Options in the upper right and then press the J button Music Track Album Artist Genre Folder Play Selected Ripping Displays all the music tracks on the media or storage device Displays all the music on the media or storage by album Displays all the music files on the media or storage device by artist Displays all music on the media or storage by genre Displays all the folders on the media or storage device Play Selected lets you create a playlist by selecting specific files to play It works essentially the same way for all media See Creating a Playlist on an Audio CD on page 38 Select Send to upload selected files to apps Picasa Facebook etc or devices To use Send you need to establish an account with the on line site and then log in using the Log In function The Ripping function converts CD audio to the mp3 format and saves the converted files on a USB device or the mobile device connected to the product See Ripping on page 39 English 37 Aeld eIPaN so Media Flay Select to see content Creating a Playlist from a CD information 1 With the Playback screen displayed select the Options i p l Select to manage the text Options button and then press the button The Encoding encoding options Options menu appears Information 2 Usethe AY buttons to se
14. Sites password Add current site Lets you add the currently displayed web site to the Approved Sites list Manage Approved Sites Lets you key in URLs to add to the Approved Sites List and delete sites from the Approved Sites list If you turn Approved Sites on and have not added any sites to the Approved Sites list you will not be able to access any Internet sites Enable or disable the Privacy mode When the Privacy mode is enabled the browser does not retain the URLs of sites you visit If you want to enable Privacy mode select OK If the Privacy mode is running the Stop icon appears in front of the URL at the top of the screen To disable Privacy mode select it again when Privacy mode is enabled Set as homepage You can set the Browser s home page Pop up Block Turns the Popup Block on and off Ad Block You can determine whether to block advertisements and select the URLs for which advertisements are blocked General You can delete personal in information such as website history and browsing data cookies etc and reset all web browser settings to their factory defaults Encoding You can set the Encoding setting for web pages to Automatic or select the encoding format manually from a list Pointer You can set the speed of the cursor when the cursor is set to Pointer and turn Smart Cursor On and Off Browser Information Displays the version number and co
15. also several Blu ray Disc functions Press to use Smart Hub Press to search contents If you want to change to Home Cinema mode on the remote control check this button s LED colour Home Cinema Orange TV Green Turns the remote control light on or off When on the buttons become illuminated for a moment when pressed Using the remote control with this button set to ON will reduce the battery usage time FUNCTION TV SOURCE PTY SEARCH PTY Use the RDS function to receive FM stations Use to enter the Popup menu Title menu Press to search backwards or forwards Press to pause a disc Search for active FM stations and to change channels TUNING CH Press to move to the Home screen Set a Sleep time to shut off the product Use to display the playback information when playing a Blu ray DVD disc Press to exit the menu Select MONO or STEREO for radio broadcasts SMART ceaney SOUND _ 30 Use to set a preset radio frequency HUB EFFECT SOUND Press to apply the 3D sound effect Press to apply sound effects English 13 papes Buen zo Getting Started Installing batteries in the Remote Control Battery size AAA a A NOTES gt Make sure to match the and ends of the batteries with the diagram inside the compartment gt Assuming typical TV usage the batteries last for about on
16. and then press the button to accept The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected e The PBC and PIN procedures connect devices automatically Through the Product Using PBC 1 Select the Wi Fi Direct device you want to connect to this product and then press the button The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected Through the Product Using a PIN 1 Select the Wi Fi Direct device you want to connect to this product and then press the button The PIN pop up appears Note the PIN code in the pop up and then enter it into the appropriate field in the Wi Fi Direct device you want to connect 4 The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected NOTES gt The current wired or wireless network connection will be disconnected when you use the Wi Fi Direct function gt Text files such as files with a TXT or DOC extension will not display when you are using the Wi Fi Direct function sbuies po Upgrading Software The Software Update menu allows you to upgrade the product s software for performance improvements or additional services e Never turn the product off or bac
17. can be impacted by the bit rate of the MP3 music file the size of the photos and the encoding method English 55 Appendix Digital Output Selection Bitstream Bitstream Sep Unprocessed Re encoded DTS Connection HDMI supported AV receiver Up to PCM 7 1ch DTS re encoded Dolby Digital Up to PCM 5 1ch Dolby Digital DTS re encoded ae cla Up toPCM7 1ch Dolby Digital Plus DTS re encoded Doly Up to PCM 7 1ch Dolby TrueHD DTS re encoded Audio TrueHD Stream on Blu ray Disc Up to PCM 7 1ch DTS re encoded DTS HD Migh Up to PCM 7 1ch DTS re encoded Up to PCM 7 1ch ee DTS re encoded Audio Resolution ais PCM PCM 2ch PCM 2ch PCM 2ch Stream on Dolby Digital Up to PCM 5 1ch Dolby Digital Dolby Digital Ls Decodes the main feature audio and BONUSVIEW audio Definition for Blu ray Disc Any stream together into PCM audio and adds Navigation Sound Effects DTS HD High Resolution Audio Audio Decodes the main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects then re encodes the Outputs only the main feature audio stream so that your AV receiver can decode the audio bitstream You will not hear BONUSVIEW audio or Navigation Sound PCM audio into DTS Effects bitstream Bitstream Re encoded Dolby D Re encoded Dolby Digital Re encoded Dolby Digital Re encoded Dolby Digital Re encoded Dolby Digital Re en
18. follow the directions on the screen Before Using Movies amp TV Shows or Apps If you haven t set up Smart Hub when you use Movies amp TV Shows or Apps for the first time the product will ask you to perform the Smart Hub set up procedure 1 On the Home screen select either Movies amp TV Shows or Apps and then press the J button If you have selected Apps go to Step 4 If you selected Movies amp TV Shows the Smart Hub pop up appears asking if you want to set up Smart Hub Select Yes and then press the J button The Welcome screen appears Select Start and then press the EJ button The Smart Hub Terms amp Conditions Privacy Policy screen appears On the Smart Hub Terms amp Conditions Privacy Policy screen you must review and agree to both the Smart Hub Terms and Conditions and the Privacy Policy to use Smart Hub Scroll down and then click the View Details buttons to review the full documents When done reading scroll up to the first entry field and press the button to agree to the Terms and Conditions and consent to the Privacy Policy Press the gt button twice to go to the Supplemental Privacy Notices screen Click the View Details button to view the entire notice When done reading scroll up to the top entry field and then press the J button NOTES gt You do not need to consent to the Supplemental Privacy Notice but one or more Smart TV features or functionaliti
19. mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW 2 English Disc Storage amp Management e Holding Discs Fingerprints or scratches on a disc may reduce sound and 5 picture quality or cause skipping Avoid touching the surface of a disc where data has been recorded Hold the disc by the edges so that fingerprints will not get on the surface Do not stick paper or tape on the disc e Cleaning Discs lf you get fingerprints or dirt on a disc clean it with a mild detergent diluted in water and wipe with a soft cloth When cleaning wipe gently from the inside to the outside of the disc Disc Storage Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean protection jacket and store vertically Handling Cautions e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus
20. network such as smart phones Lets you re run the Initial Settings Settings and e can share content with Setup procedure your TV l l You can select the language you Lets you assign an identifying name prefer for the On Screen menu disc to the product You use this name menu subtitles etc Device Name to identity the product when you are Language e The language you select for the ee g i hee re disc menu disc audio or subtitles smart phones tablets etc to it will only appear if it is Supported Set various BD Live functions on the disc sedate io eee You can connect a wireless USB Discs if you are connected to the ee ete menet Device on the front of the product BD Live BD Live Internet Connection Manage g Ea oe r Settings Lets you fully allow partly allow or prohibit a BD Live Internet connection Y BD Data Management Manage BD data downloaded from a BD Live service or Blu ray Disc connected to the product English 23 Settings Device Manager NOTES gt You can use the keyboard only when a QWERTY keyboard screen or window appears in the Web Browser J Mouse Settings Lets you configure a wireless USB mouse connected to the product You can use the mouse in the product s menu in the same way you use a mouse on your PC To use a mouse with the product s menu 1 Connect the USB mouse to the product 2 Click the primary button you selected in Mouse Settings The Simple M
21. network you can enjoy various movie related service contents available on BD LIVE compliant discs 1 Attach a USB flash drive to the USB jack on the front of the product and then check its remaining memory The memory device must have at least 1GB of free space to accommodate the BD LIVE services 2 Select Settings on the Home screen and then press the amp button 3 Select Network and then press the button 4 Select BD Live Settings and then press the button 5 Select BD Data Management and then press the button 6 Select Select Device and then press the button 7 Select USB device and then press the button Insert a Blu ray Disc that supports BD LIVE Select an item from the list of BD LIVE service contents provided by the disc manufacturer NOTES gt The way you use BD LIVE and the provided contents may differ depending on the disc manufacturer English 53 SODINIOS YIOMION Appendix Additional Information Notes Connections HDMI OUT Certain HDMI output resolutions may not work depending on your TV You must have a HDMI connection to enjoy videos with 3D technology A long HDMI cable may cause screen noise If this occurs set HDMI Deep Colour to Off in the menu Settings 3D Settings For some 3D discs to stop a movie during 3D playback press the J button once The movie stops and the 3D mode option is de activated To change a 3D option selection when you are
22. on the disc box Please refer to this if necessary gt When you play a BD J title loading may take longer than a normal title or some functions may perform slowly v v v v Disc Types your Product cannot Play e HD DVD e DVD RAM e DVD RW VR mode e 3 9 GB DVD R Disc for e DVD ROM PD MV Disc Super Audio CD e CVD CD ROM CDV Authoring etc except CD layer CD G CD I LD CD Gs play audio only not graphics NOTES gt This product may not respond to all operating commands because some Blu ray Disc DVD and CD discs allow specific or limited operation and provide only certain features during playback Please note that this is not a defect in the product gt Samsung cannot guarantee that this product will play every disc bearing the Blu ray Disc DVD or CD logo because disc formats evolve and problems and errors may occur during the creation of Blu ray Disc DVD and CD software and or the manufacture of discs gt Please contact the SAMSUNG Customer Care Centre at if you have questions or encounter difficulty when playing Blu ray Disc DVD or CD discs in this product Also refer to rest of this user manual for additional information on playback restrictions gt Some commercial discs and DVD discs purchased outside your region may not play on this product 6 English Region Code Both products and discs are coded by region These regional codes must match for a disc to play If the codes Logos of Discs t
23. ripping press the button connection may not work properly and then select Yes Select No to continue ripping The Home Cinema has an effective reception range 10 When ripping is complete the Successfully of up to 10 meters in all directions if there are no Ripped message appears Press the button obstacles The connection will be automatically cut off 11 Press the RETURN button to go back to the if the device is out of this range Even within this range Playback screen the sound quality may be degraded by obstacles such as walls or doors NOTES This wireless device may cause an electric interference gt This function is not available with DTS Audio CDs during its operation gt This function may not be supported by some discs gt Ripping encodes music to the mps format at To connect the Home Cinema to a 192kbps Bluetooth device gt On the Ripping screen you can also choose Select All and or Clear All Use Select All to select all tracks and press the button This cancells your individual track selections Use Clear All to deselect all selected tracks at once Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function English 39 Media Flay 1 Press the FUNCTION button on the remote control of the product to display the BT message 2 Select the Bluetooth menu on the Bluetooth device you want to connect For instructions refer to the Bl
24. speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks 4 Connect the left and right surround speakers to the wireless receiver module Again match the colour of the plugs to the jacks on the wireless receiver module Plug the power cord of the wireless receiver module into a wall outlet Turn on the product The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers 116 English Centre opeakel Front Front Top Subwoofer Skar e3 e0 Ga Front Front Top Speaker R Surround Surround Speaker L Speaker R SIJEAKERS OUT Wireless Receiver Module This product should be connected with the SWA 6000 only CAUTION gt If you want to install the product on the wall fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install However when you install it accessories nails or Screws and installation is not provided by the company gt Do not let children play with or near the speakers They could get hurt if a speaker falls gt When connecting the speaker wires to the speakers make sure that the polarity is correct gt Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances in
25. the DLNA function after connecting to a computer through your network Search Scene may not be supported If there is more than one movie on the disc or device select to start a different title 1 Select Search Titles and then press the J button 2 Usethe AY buttons to select a title and then press the button Select to play the chapter of your choice 1 Select Chapter Search and then press the J button 2 Usethe AY buttons to select a chapter and then press the button Select to play the movie from a selected time point 1 Select Search Time Bar and then press the J button 2 Using the number buttons enter the time point you want to go to and then press the button NOTES gt You can also use the lt gt buttons to advance or rewind the movie The movie advances or rewinds one minute each time you press the lt P buttons specific section Equaliser NOTES Off Select to return to normal i o playback Sei gt It only appears when equaliser m Title Choose to repeat a MRR ON selected title Audi Select to set the desired audio Chapter Choose to repeat a oo language U specific chapter 2 Repeat A B Choose to repeat In some cases when the product is a specific section connected to a digital TV the audio signal may not synchronize with the 1 een ee uel ane video signal If this occurs adjust a the audio delay time to match the Repeat Mode a p press th
26. the product 3 Select Photos Videos amp Music on the Home screen and then press the button English 31 Media Play 4 Select Photos Videos Music or All Content and then press the J button Depending on how the contents are arranged you will see either folders individual files or both NOTES gt Even though the product will display folders for all content types it will only display files of the Content Type you selected in Step 4 For example if you selected music you will only be able to see music files You can change this selection by returning to the Photos Videos amp Music screen and repeating Step 4 5 Use the lt gt buttons to select the desired device and then press the amp J button 6 If necessary use the A Y lt P buttons to select a folder and then press the J button 7 Press the RETURN button to exit a folder or the Exit button to return to the Home screen 8 Goto pages 33 41 for instructions that explain how to control playback of videos music and pictures on a USB device NOTES gt If you insert a disc when playing a USB device or phone the device mode changes to Disc automatically gt If your cellular phone is DLNA compatible you can play contents without connecting a USB cable See Using the AllShare Network Function on page 32 Playing a Disc with User Recorded Content You can play multimedia files you have recorded on Blu ray DVD or CD di
27. to select a category Each time you move the highlight to another category a different set of applications appears on the right Use the gt button to move to the applications and the AV lt P buttons to move from app to app To see more information about an app select it and then press the J button To download the app follow the directions in Steps 2 and 3 Starting an Application 1 Select Apps on the Home screen and then press the E button On the Apps screen use the AV lt gt buttons to select an app and then press the button The app starts Using the More Apps Screen More Apps The More Apps Screen lists all the apps you have downloaded and lets you Sort the apps on the More Apps screen by Date Downloaded Recently Opened and Title Apply a number of Options Menu functions to the apps listed in the My Apps section of the Apps screen including updating apps moving apps into a folder deleting the apps from My Apps and locking the apps Start apps Sorting the Apps To sort the apps on the More Apps screen follow these steps 1 On the Home screen select Apps and then press the button 2 Onthe Apps screen use the Y button to move to the More Apps hotspot at the bottom of the page and then press the amp button 3 On the More Apps screen use the A gt buttons to move to View at the top of the screen and then press the amp button 4 Inthe drop down that appears select D
28. 3 Usethe AV lt P buttons to move to an app and then press the button to select the app A check appears in the upper left corner of the app 4 To deselect an app press the button The check disappears 5 Repeat Step 3 to select additional apps NOTES gt To select all the downloaded apps select Select All at the top right of the screen and then press the button To deselect all the apps select Deselect All at the top right of the screen and then press the button 6 When done select Select folder at the top of the screen and then press the button The Select Folder pop up appears 7 Inthe Select Folder pop up use the A Y buttons to select the folder you want to move the apps you selected to and then press the button 8 The Apps Moved pop up appears Press the button 9 To open the folder use the AV lt gt buttons to highlight the folder and then press the button Rename Folder Rename Folder lets you rename an existing folder 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the amp button 2 Select Rename Folder and then press the button The Rename Folder screen appears and a folder is highlighted 3 User the AVY lt gt buttons to highlight a folder of your choice and then press the button The Rename pop up appears Press the button The keyboard appears 5 Enter the new name for the folder When finished select
29. 5 16 17 18 Daewoo 25972829 90 22 94 35 36 48 59 90 Daytron 40 Dynasty 03 coo PE Fisher 19 65 Funai 03 Futuretech 03 O ue 06 40 56 59 66 67 68 Hall Mark 40 Hitachi 15 18 50 59 69 Inke 45 JC Penny 56 59 67 86 NC m si 59 61 87 88 KEC 03 15 40 KMC 15 LG Goldstar 0 T l 5 8 39 Luxman 18 LXI Sears 19 54 56 59 60 62 63 Magnavox 15 17 he ai 59 60 Marantz 40 54 Matsui 54 MGA 18 40 Brand Code Mitsubishi MGA 18 40 59 60 75 MTC 18 NEC 18 19 20 40 59 60 Nikei 03 Onking 03 Onwa 03 eiie 06 07 08 09 54 66 67 73 74 Penney 18 Philco 03 15 17 18 48 54 59 62 69 90 r 15 17 18 40 48 54 Philips 62 72 Pioneer 63 66 80 91 Portland 15 18 59 Proton 40 Quasar 06 66 67 Radio Shack 17 48 56 60 61 75 18 59 67 76 77 78 RCA Proscan 90 93 94 Realistic 03 19 Sampo 40 00 15 16 17 40 43 Samsung 46 47 48 49 59 60 98 Sanyo 19 61 65 Scott 03 40 60 61 Sears 15 18 19 Sharp 15 57 64 Sony 50 51 52 53 55 Soundesign 03 40 Spectricon 01 SSS 18 Sylvania 18 40 48 54 59 60 62 Symphonic 61 95 96 Tatung 06 Techwood 18 Teknika 03 15 18 25 TMK 18 40 Toshiba 19 57 63 71 Vidtech 18 Videch 59 60 69 15 17 18 40 48 54 Wards 60 64 Yamaha 18 York 40 Yupiteru 03 Zenith 58 79 Zonda 01 Dongyang 03 54 Connections This section describes various methods of connecting the produc
30. A lt P buttons to move the app icon in the direction of one of the arrows lt gt etc that appears around the app icon The app icon moves in the direction you have chosen 4 After you have placed the app icon where you want press the amp button 5 When you return to the Apps screen the app will be positioned in the location you had selected Create Folder Create Folder lets you create a folder on the More Apps screen into which you can put apps 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the button 2 Select Create Folder and then press the button The Set Folder Name pop up appears 3 Press the button The keyboard appears Select the Clear button on the right side and then press the button to remove Folder 1 from the entry field Then using the keyboard enter the name you want to apply to the folder 5 When finished select the Done button on the right side and then press the button The pop up reappears 6 Select OK and then press the EJ button The new folder appears in the list of apps on the left side of the screen Move to Folder Move to Folder lets you move apps to the folder of your choice 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the J button 2 Select Move to Folder and then press the button The Move to Folder screen appears
31. CA audio cable not supplied connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component Select the AUX mode e Be sure to match the colours on the cable plugs to the colours on the input and output jacks Method 3 OPTICAL Connecting an External Digital Audio Component To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers Set Top Boxes Using a digital optical cable not supplied connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device Select the D IN mode NOTES gt To see video from your Cable Box Satellite receiver you must connect its video output directly to your TV gt This system supports Digital sampling frequencies of 32 kHz or higher from external digital components gt This system supports only DTS and Dolby Digital audio MPEG audio a bitstream format is not supported 118 English Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below Wired Network Broadband modem with integrated router Broadband service Broadband service i Broadband z modem NOTES gt Your router or your Internet Service Provider s policies may prevent the product from accessing Samsung s
32. Conversion Off Max Resolution of TV input Movie Frame Off Max Resolution of TV input Movie Frame Auto DVD 24fps Conversion Auto Movie Frame Auto Auto 1080p amp 1080i only neeeeae 1080p 1080p 60F 1080 10801 720p 720p 576p 480p 576p 480p NOTES gt Ifthe TV you connected to the product does not support Movie Frame or the resolution you selected the message If no pictures are shown after selecting Yes please wait for 15 seconds to return to the previous resolution Do you want to change the resolution appears If you select Yes the TV s screen will go to blank for 15 seconds and then the resolution will revert to the previous resolution automatically gt If the screen stays blank after you have changed the resolution remove all discs and then press and hold the J button on the top of the product for more than 5 seconds All settings are restored to the factory default Run the Initial Settings procedure again Then go to Settings gt Display gt Resolution in the Menu and select the correct resolution for your TV gt When you run the Initial Settings procedure re select the language and aspect ratio Screen size and format only Resetting does not affect your network settings so you should be able to skip Network Setup and Software Update gt When the factory default settings are restored all stored user BD data will be deleted gt The Blu ray Disc must have the 24 frame feature for th
33. Enter letters by selecting a letter with the AY lt P buttons and then pressing the button 13 When finished select Done at the right of the screen and then press the button The product verifies the network connection and then connects to the network 14 After the home cinema verifies the network select OK and then press the J button NOTES gt You can also begin the Manual Network setting by going to Settings gt Network gt Network Status a WPS PBC One of the easiest ways to set up the wireless network connection is using the WPS PBC function If your wireless router has a WPS PBC button follow these steps After following Steps 1 to 3 in Configuring Your Network Connection on page 26 28 English 1 In the Network Settings screen change Network type to Wireless The product searches for and then displays a list of the available networks 2 Scroll the list down select WPS PBC and then press the button 3 Press the WPS PBC button on your router within two minutes Your product automatically acquires all the network settings values it needs and connects to your network The product connects to the network after the network connection is verified 4 When itis done highlight OK and then press button NOTES gt For WPS connection set your wireless router s security encryption to AES Setting to WEP security encryption does not support WPS connection Wi Fi Direct The W
34. QCELP AMR NB WB Supports vorbis Up to 2ch Supports Dolby Digital Plus Up to 7 1ch Comments MPEG4 Supports up to GMC 1 Warping Point H 264 Supports up to BP MP HP Level 4 1 WMV Supports V9 VC1 SP MP AP L3 MPEG1 Does not support D picture MPEG2 Supports up to Hight Profile High Level Q Supported DivX subtitle file formats ttxt smi srt sub txt NOTES gt Some MKV and MP4 format discs may not play depending on their video resolution and frame rate Music File Support File Extension Container mp3 MPEG FLAC FLAC Supports up to 2ch ogg OGG DS up to Supports WMA 10 Pro Up to 5 1 Does not support WMA lossless audio Supports up to M2 profile Does not support LBR mode Container m4a mpa MPEG4 aac flac wma WMA Wav mid E emid midi type O and type 1 Does not support a X13 NVT Resolution 15360x8640 4096x4096 4096x4096 15360x8640 Notes on the USB connection Your product supports USB storage media MP3 players digital cameras and USB card readers The product does not support folder or file names longer than 128 characters Some USB digital camera devices may not be compatible with the product Your product supports the FAT 16 FAT 32 and NTFS file systems Connect USB devices directly to the product s USB port Connecting through a USB cable may cause compatibility problems Inserting more than o
35. RETURN button on your remote or select Play lid ar eee and then press the button all tracks will appear on the Music Playback screen and the product will begin to play all tracks from Track 001 e Use Deselect All to deselect all selected tracks at once Then select individual tracks or use Select Shuffling Tracks on an Audio CD All to select all the tracks and then press the You can set the product to play tracks on an audio CD RETURN button on your remote or select Play and CD DA MP3 at random then press the button If you do not use Select All or select individual tracks the Playlist will not 1 During playback use the A gt buttons to select 7c in the lower left corner of the screen and then e Cancel cancells any changes you made on the Play press ine Sutton Select screen When you return to the Playback 2 Use the AY to set the Shuffle mode Off or On and screen the Playlist will be unchanged then press the J button change 138 English Ripping Using Bluetooth 1 Insert a USB device into the USB jack on the front You can use a Bluetooth device to enjoy music with high of the product quality stereo sound all without wires Q 2 With the Playback screen displayed select the Options button and then press the amp button What iS Bluetooth The Options menu appears Bluetooth is a technology that enables Bluetooth S 3 Use the A Y buttons to select Ripping and then compliant devices to i
36. Samsung screen gt Do not turn off the product during the software upgrade It may cause the product to malfunction gt Software upgrades using the USB jack must be performed with a USB flash drive only M G ro al Your home cinema can play content located on Blu ray Method 1 DVD CD discs USB devices PCs smart phones tablets and on the Web 1 Turn the product on To play content located on your PC or a mobile device 2 Connect the USB device to the USB port on a you must connect the PC or mobile device and the the front panel of the product The New Device product to your network To play content on your PC you Connected pop up appears must also download and install AllShare network software or already have DLNA network software on your PC vu ped lt NOTES gt PCs running Windows 7 and Windows 8 have DLNA software Play To built in New device connected USB Flash Disk Photos The All Content Screen ee le All Content For all media the All Content screen or one of its sub screens is your primary means of accessing and playing contents saved on a variety of devices either connected directly or using your network Using the All Content Screen NOTES To access the All Content screen select Photos Videos gt If the pop up does not appear go to Method 2 amp Music on the Home screen and then press the 3 Use the AY buttons to select Photos Videos button Music or All Conten
37. Smart Hub and BD LIVE and upgrade the product s software through the network connection For more information about accessing and using Internet services see the Network Services chapter of this manual on pages 45 53 Instructions for configuring the network connection start below Configuring your Network Connection If you didn t configure your network connection during the initial settings procedure or you need to reset the network connection follow the directions below Before you begin contact your Internet Service Provider to find out if your IP address is static or dynamic If it is dynamic and you have a wired or wireless network we recommend using the Automatic configuration procedures described below If you are connecting to a wired network connect the product to your router using a LAN cable before you start the configuration procedure To begin configuring your network connection follow these steps 1 Inthe Home screen select Settings and then press the amp button Select Network and then press the button 3 Select Network Settings and then press the button 4 Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 27 Wired Network Wired Automatic After following Steps 1 to 3 above 1 In the Network Settings screen change Network type to Wired Then select Connect and press the EJ button The product detects the wired conn
38. Speaker Settings e When Speaker Selection is set to TV Speaker audio is produced through the TV speakers e Running the Auto Sound Calibration function takes about 3 minutes e Make sure there is no disc in the product when you run the Auto Sound Calibration function e f the ASC microphone is disconnected during the Auto Sound Calibration setup the setup will be cancelled e When the Auto Sound Calibration function is activated the DSP Dolby Pro Logic Il and SFE Mode will not work e lf the product is connected to external devices or other components Such as an AUX D IN the Auto Sound Calibration Setup may not work properly HDMI audio e When HDMI audio is output to the TV speakers it is automatically down mixed to 2 channels Audio Return Channel e When Anynet HDMI CEC is Off the Audio Return Channel function is not available e Using an HDMI cable not certified for ARC Audio Return Channel may cause a compatibility problem e The ARC function is only available if an ARC compliant TV is connected Playback Playing Video files e Video files with high bit rates of 2OMbps or more strain the product s capabilities and may stop playing during playback Selecting the Audio Language e The lt P indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings e The languages available through the Audio Language function depend on the languages that
39. Verance Reverse engineering or disassembly is prohibited Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu 4 English Using the 3D Function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the 3D function Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove the 3D Active Glasses and rest Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing 3D TV remove your 3D Active Glasses and rest A responsible adult should frequently check on children who are using the 3D function If there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D TV and rest Do not use the 3D Active Glasses for other purposes such as general eyeglasses sunglasses protective goggles etc Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects trip and or fall and cause serious injury If you want to enjoy 3D content connect a 3D device 8D compliant AV receiver or TV to the product s HDMI OUT port using a high speed HDMI cable Put on 3D glasses before playin
40. Visit www samsung com 2 Click SUPPORT on the top right of the page Enter the product s model number into the search field As you enter the model number a drop down will display products that match the model number 4 Left click your product s model number in the drop down list 5 On the page that appears scroll down to and then click Firmware Manuals amp Downloads 6 Click Firmware in the centre of the page 7 Click the ZIP button in the File column on the right side of the page 8 Click Send in the first pop up that appears Click OK in the second pop up to download and save the firmware file to your PC 9 Unzip the zip archive to your computer You should have a single folder with the same name as the zip file 10 Copy the folder to a USB flash drive 11 Make sure no disc is inserted in the product and then insert the USB flash drive into the USB port of the product 12 In the product s menu go to Settings gt Support gt Software Update 13 Select Update now 14 The product searches for the software on the USB drive When it finds the software the Update Request pop up appears 15 Select OK The product upgrades the software turns off and then turns on automatically NOTES gt There should be no disc in the product when you upgrade the software using the USB jack gt When the system upgrade is done check the software details in the Product Information section of the Contact
41. ate Downloaded Recently Opened or Title and then press the button The apps on the More Apps screen are sorted by the criteria you have chosen English 47 SODIMOS MOMION 90 Network Services Using the Options Menu Functions Lock Unlock Using the Lock Unlock function and the Security PIN you can lock applications so they cannot be started on either the Apps screen or the More Apps screen The default PIN is OOOO 1 On the More Apps screen use the A gt buttons to go to Options at the top of the screen and then press the amp button 2 Select Lock Unlock and then press the button 3 When the Lock Service appears enter the PIN using the number buttons on your remote control 4 To lock an application select the application and then press the button A lock appears on the app Repeat to lock other individual apps 5 To unlock a locked app select the application and then press the J button 6 To lock all the apps at once use the A gt buttons to select the Lock All button and then press the button 7 To unlock all the locked apps at once use the AP buttons to select the Unlock All button and then press the amp button 8 Press the RETURN button twice to return to the Apps screen Locked apps will display a lock on the upper right side Edit My Apps Edit My Apps lets you add apps to and delete apps from My Apps It also lets you change the position of an app in My Apps
42. ating Humidity Range 10 to 75 Output 165W x 2 CH Frequency range 20Hz 20KHz S N Ratio 65dB 62 English Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Area Contact Centre amp Web Site Area Contact Centre amp Web Site Europe LUXEMBURG 261 03710 www samsung com AUSTRIA 0810 SAMSUNG 7267864 0 07 min www samsung com MONTENEGRO 020 405 888 www samsung com www samsung com be NETHERLANDS 0900 SAMSUNG 0900 7267864 0 10 Ww samsung com BELGIUM 02 201 24 18 Dutch ul www samsung com be_fr NORWAY 815 56480 www samsung com EES cent 0 801 172 678 lub 48 22 607 93 33 Www samsung com catkowity koszt po czenia jak za 1 impuls BULGARIA 07001 33 11 share cost tariff www samsung com bg a wedtug taryfy operatora www samsung com pl CROATIA 062 SAMSUNG 062 726 786 www samsung com hr koszt potaczenia wed ug taryfy operatora 800 SAMSUNG 800 726786 www samsung com PORTUGAL 808 20 SAMSUNG 808 20 7267 www samsung com CZECH Samsung Electronics Czech and Slovak s r o V Parku 2343 24 148 00 ROMANIA 08008 SAMSUNG 08008 726 7864 www samsung com to Praha 4 TOLL FREE No DENMARK 70 70 1970 www samsung com SERBIA 011 321 6899 www samsung com rs FINLAND 030 6227 515 www samsung com SLOVAKIA 0800 SAMSUNG 0800 726 786 w
43. ation and then press the J button Follow the directions on the screen to start the movie NOTES gt If you haven t logged into your Samsung account the Log in screen will appear after Step 3 and you will need to log in 46 English gt If you don t have a credit card associated with your Samsung account after you log in the Register Card screen will appear Follow the directions on the screen You must have a credit card registered to your account to rent movies and to purchase for pay apps Using Apps You can download the applications from the Internet and access various for pay or free of charge application and view them on your TV To access some applications you need to have a Samsung account The Apps Screen at a Glance Recommended Displays recommended contents managed by Samsung Gives you access to various for pay or free of charge applications you can download Featured Applications Use the AV lt gt buttons to highlight the displayed Feature Application and then press the button Information about the featured application appears My Apps Displays your personal gallery of applications modifiable on the More Apps screen More Apps Select More Apps to access O the More Apps screen where you can add to modify and delete applications and see all downloaded applications _hiia Downloading Applications You can download for pay or free of charge applications t
44. b Browser You can access the Internet using the Web Browser application RED A Press the RED A button on your remote to create and or log in to your personal Samsung account BLUE D Set up the wireless mirroring function between the home cinema and a smart phone or tablet Selecting an Option on the Home Screen 1 To select an option on the Home screen move the cursor using the A lt gt buttons until it highlights the option of your choice and then press the button NOTES gt If you leave the product in the stop mode for more than 5 minutes without using it a Screen saver will appear on your TV If the product is left in the screen saver mode for more than 20 minutes the power will automatically turn off Accessing the Settings Screen 1 Select Settings on the Home screen and then press J The Settings screen appears Settings Display UHD Output Auto 3D Settings TV Aspect Ratio 16 9 Original BD Wise Off Resolution Auto Movie Frame 24Fs Auto DVD 24fps Conversion Off Audio Network Smart Features System Support 2 To access the menus sub menus and options on the Settings screen please refer to the remote control illustration on the next page Buttons on the Remote Control Used for the Settings Menu 3D Settings TUNERMEMORY MO ST HOME Button Press to move to the Home TV Aspect screen Ratio RETURN Button Return to the previous menu Enter
45. coded Dolby Digital Re encoded Dolby Digital Re encoded Dolby Digital PCM 2ch Dolby Digital DIS Decodes the main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects then re encodes the PCM audio into Dolby Digital bitstream or PCM a f the Source Stream is 2ch or mono Re encoded Dolby D Setting are not applied Output will be PCM 2ch Blu ray Discs may include three audio streams Main Feature Audio The audio soundtrack of the main feature BONUSVIEW audio An additional soundtrack such as the director or actor s commentary Navigation Sound Effects When you choose some menu navigation Navigation Sound Effects may sound Navigation Sound Effects are different on each Blu ray Disc 56 English Resolution according to the contents type Contents Type EEV DEE E contents Setup Digital contents BD Wise Resolution of Blu ray Disc 1080p 60F UHD Output Auto 2160p 24F 2160p 24F Movie Frame Auto Auto UHD Output Off 1080p 24F 1080p 24F Movie Frame Off Max Resolution of TV input Max Resolution of TV input Movie Frame Auto 24Fs 1080p 24F 10800024F 1080p amp 1080i only p p 1080p 1080p 60F 1080p 60F 1080i 1080i 1080i 720p 720p 720p x pu ddy 0 576p 480p 576p 480p 576p 480p Contents Type DVD Setup BD Wise 480i UHD Output Auto 2160p 24F DVD 24fps Conversion Auto UHD Output Off 1080p 24F DVD 24fps
46. correctly customized Is the disc severely damaged On certain Blu ray DVD discs sound is output from the front speakers only Check if the speakers are connected properly Adjust the volume When listening to a CD radio or TV sound is output to the front speakers only Is there Dolby Digital 7 1 CH mark on the disc Dolby Digital 7 1 CH Surround Sound is produced only if the disc is recorded with 7 1 channel sound Is the audio language correctly set to Dolby Digital 7 1 CH in the information display Are you operating the remote within its operational range and within the proper angle relative to the sensor Are the batteries drained Have you selected the mode TV BD functions of the remote control TV or BD correctly Is the TV power on Are the video cables connected properly Is the disc dirty or damaged A poorly manufactured disc may not be playable Audio language and subtitles will not work if the disc does not contain them Symptom The menu screen does not appear even when the menu function is selected The aspect ratio cannot be changed e The product is not working Example The power goes out or a strange noise is heard e The Product is not working normally You have forgotten the rating level password Can t receive radio broadcasts While listening to TV audio through the Product no sound is heard Not Available appears on screen If the HDMI output is set to a reso
47. e J button video signal 2 Press the button at the l l point where you want repeat Subtitle Select to set the desired subtitle play to start A Let the movie language lay a Subtitle Select to set the desired subtitle 3 Press the button at the Settings options point where you want repeat play to stop B To view a scene from another angle The Angle option displays NOTES Angle the number of angles available to gt You must set point B at least view 1 1 1 2 1 3 etc 5 seconds of playing time after point A BONUSVIEW Scie asetine piclremode Video Select to set the desired bonusview option Dynamic Increases sharpness BONUSVIEW i and brightness Audio Standard Choose this setting Select to set the size of the video for most viewing applications Full Screen image Choose Original Mode1 Movie The best setting for larger or Mode2 largest watching movies Picture Mode _ User Lets you adjust the Information Select to view video file information sharpness and noise reduction function respectively NOTES Select to repeat a title chapter or NOTES Select to set the Equaliser gt Depending on the disc or storage device the Tools menu may differ gt Video files with high bit rates of 20Mbps or more strain the product s capabilities and may stop playing during playback gt When you use the BD wise function this menu will not appear Equaliser Mode Select
48. e device by title English 41 Media Flay e Manual Tuning Press the J button to select Manual and then press the TUNING CH A V button to tune to a lower or higher frequency e Automatic Tuning Press the J button to select Manual and then press and hold the TUNING CH A V button to automatically search the band Setting Mono Stereo Press the MO ST button e Each time the button is pressed the sound switches between STEREO and MONO e Ina poor reception area select MONO for a clear interference free broadcast Presetting Stations Example Presetting FM 89 10 into memory 1 Press the FUNCTION button to select FM 2 Press the TUNING CH A V button to select lt 89 10 gt 3 Press the TUNER MEMORY button e NUMBER flashes on the display 4 Press the TUNER MEMORY button again e Press the TUNER MEMORY button before NUMBER disappears from the display on its own e After you press the TUNER MEMORY button NUMBER disappears from the display and the station is stored in memory 5 To preset another station repeat steps 2 to 4 e To tune to a preset station press the E button to select Preset and then press the TUNING CH AV button to select the preset station About RDS Broadcasting Using the RDS Radio Data System to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals For example the stations send their station names as wel
49. e batteries from other types of waste and recycle them through your local free battery return system Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their F working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal AH68 02630G 03
50. e power cord as the figure shows and press it until it clicks For the Speaker Cable p e Rond o a IN gt 2 SPEAKERS OUT lt Main Unit gt lt SWA 6000 gt Main Unit 1 Open the ferrite core by pulling up the tab 2 Make a loop twice in the Speaker Cables 3 Attach the ferrite core to the arranged cables and press to close it until you hear a click e Insert the ferrite core as close to the main unit as possible SWA 6000 Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver SWA 6000 and insert the ferrite core in the same way as step 3 above 12 English Remote Control Tour of the Remote Control Turn the product on and off Press to select the home cinema s mode HDMI1 AUX BD DVD etc or Press to select TV s video mode Press to open and close the disc tray Press numeric buttons to operate options Press to view the disc menu Press to skip backwards or forwards Press to stop play a disc Cut off the sound temporarily Adjust the volume Press to output the audio signal to the home cinema speakers or the TV Speaker See page 44 Use to adjust the level of the subwoofer Press to use the Tools menu Select on screen menu items and change menu value Return to the previous menu These buttons are used both for menus on the product and
51. e product s Depending on the disc or contents some of the functions Home screen and then press the EJ button The described in this manual may not be available Photos Videos amp Music screen appears 4 Select the type of content you want to play Buttons on the Remote Control used Photos Videos Music or All Content and then for Video Playback press the J button 5 On the next screen select AllShare and then press TEE MEN the button O ponu 6 Inthe list of AllShare connected devices that appears select your PC or other AllShare compatible device and then press the button A screen listing the available files appears 7 Select the file you want to play or view and then press the amp button Using the disc menu title menu popup menu and Controlling the Playback of Content title list Located on Your PC with your Smart Phone DISC MENU During playback press this button to display the Disc menu Product During playback press this button to 7 TITLE display the Title menu if MENU e f your disc has a playlist press the Play back View button to go to the playlist PC s files POPUP During playback press this button to AllShare Control PC s files MENU display the Popup menu Smart Phone Only available with Samsung phones supporting AllShare functionality English 33 Media Play Playback related buttons The product does not play sound in Search Slow or S
52. e product to use the Movie Frame 24Fs mode English 57 Appendix Troubleshooting Refer to the table below when this product does not function properly If the problem you are experiencing is not listed below or if the instructions below do not help turn off the product disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre Symptom cannot eject the disc Playback does not start Playback does not start immediately when the Play Pause button is pressed Sound is not produced Sound can be heard only from a few speakers and not all 8 Dolby Digital 7 1 CH Surround Sound is not produced The remote control does not work e The disc is rotating but no picture is produced e Picture quality is poor and the picture is shaking Audio language and subtitles do not work 58 English Check Remedy Is the power cord plugged securely into the outlet Turn off the power and then turn it back on Check the region number of the Blu ray DVD disc Blu ray DVD disc purchased from abroad may not be playable CD ROMs and DVD ROMs cannot be played on this product Make sure that the rating level is correct Are you using a deformed disc or a disc with scratches on the surface Wipe the disc clean The home cinema does not play sound during fast playback slow playback and step motion playback Are the speakers connected properly Is the speaker setup
53. e year gt The remote control can be used up to approximately 7 meters from the product in a straight line Setting up the Remote Control You can control certain functions of your TV with this remote control To operate a TV with the Remote Control 1 Press the TV button to set the remote control to TV mode 2 Turn on your TV 3 While holding down the POWER button enter the code corresponding to your brand of TV e f there is more than one code listed for your TV in the table enter one at a time to determine which code works e Example For a Samsung TV While holding down the POWER button use the number buttons to enter OO If that does not work try 15 then 16 etc 4 Ifthe TV turns off the setting is complete e You can use the TV POWER VOLUME CHANNEL and Numeric buttons 0 9 NOTES gt The remote may not be able to control some functions depending on your brand of TV Also the remote control may not work on some brands of TVs gt The remote control will work with Samsung TVs by default 114 English TV Control Codes Brand Code Admiral Ward 56 57 58 A Mark 01 15 01 02 03 04 05 06 07 Anam 06 09 10 11 12 13 14 AOC 01 18 40 48 i o 57 58 81 Brocsonic 99 60 Candle 18 Cetronic 03 Citizen 03 18 25 Cinema 97 Classic 03 Concerto 18 Contec 46 Coronado 15 Craig 03 05 61 82 83 84 Croslex 62 Crown 03 Curtis Mates 59 61 63 CXC 03 02 03 04 1
54. ear in a ring around Sites the letter you have just entered You can select a predicted letter or move to another letter You can turn this function On or Off Approved Predict Next Letter Using the Setting Menu The Setting menu contains functions that control how the Browser operates and Browser security functions To open the Setting menu highlight the k44 icon in the Control Panel and then press the button To select an option in the setting menu highlight the option and then press the J button http www samsung com Enable Grabbing Approved Sites Private browsing on Web Browser Settings Private browsing on off Turns the Grabber function On and Off When the Grabber function is Enable on you can move a web page up Disable and down without dragging the Grabbing scroll bar The Grabber function is only available in Pointer Browsing 52 English Lets you restrict your children s access to inappropriate web pages by allowing access only to the web sites you have registered Every time you access Approved Sites the PIN screen appears The first time you access Approved Sites enter the default PIN 0000 using the number buttons on your remote You can change the PIN using the Reset password for the Approved Sites function See below Approved Sites feature Turns the Approved Sites function on or off Reset password for Approved Sites Change the Approved
55. ears Press the J button to exit 4 If it finds anew version the Update Request pop up appears 5 Select OK The product upgrades the software turns off and then turns on automatically 6 Ifyou do not select OK or Cancel in one minute the product stores the new upgrade software You can upgrade the software later using Auto update 7 Ifyou select Cancel the product cancells the upgrade NOTES gt When the system upgrade is done check the software details in the Product Information section of the Contact Samsung screen gt Do not turn off the product during the software upgrade It may cause the product to malfunction Auto update You can set the Auto update function so that the product downloads new upgrade software when it is in Auto update mode In Auto update mode the product is off but its Internet connection is active This allows the product to download upgrade software automatically when you are not using it 1 Press the AY buttons to select Auto update and then press the J button 2 Select On or Off If you select On the product will automatically download new upgrade software when it is in Auto update mode with the power off If it downloads new upgrade software the product will ask you if you want to install it when you turn the product on NOTES gt To use the Auto update function your product must be connected to the Internet 130 English Update by USB 1
56. ection verifies the network connection and then connects to the network 2 When itis done highlight OK and then press button 26 English Q Wired Manual If you have a static IP address or the automatic procedure does not work you ll need to set the Network Settings values manually After following Steps 1 to 3 above 1 In the Network Settings screen change Network type to Wired Then select Connect and press the button The product searches for a network and then displays the connection failed message NOTES gt If it is possible to connect the home cinema to your network wirelessly select Change Network at this point change the Network type to Wireless and then go to the instructions for wireless networks on page 27 Network Settings Wired network connection failed MAC Address IP Address Subnet Mask 2 Use the lt gt buttons to select IP Settings and then press the button The IP Settings screen appears 3 Select the IP setting field and then set it to Enter manually 4 Select a value to enter IP Address for example and then press Use the number keypad on your remote control to enter the numbers for the value You can also enter numbers using the A Y buttons Use the lt gt buttons on the remote control to move from entry field to entry field within a value When done with one value press the button 5 Press the A or Y button to move to another value and then ent
57. enu appears 3 Click the menu options you want NOTES gt Some USB HID keyboards and mice may not be compatible with your product gt Some HID keyboard keys may not work gt Wired USB keyboards are not supported gt Some applications may not be supported gt Ifa wireless HID Keyboard does not operate because of interference move the keyboard closer to the product General Security 24 English The default security PIN is 0000 Enter the default PIN to access the security function if you haven t created your own PIN VY BD Parental Rating Restrict playback of Blu ray discs with specific ratings unless the PIN is entered vZ DVD Parental Rating Prevents playback of DVDs with a rating above a specific numerical rating you have set unless the PIN is entered Anynet HDMI CEC VZ Change PIN Change the 4 digit PIN used to access security functions f you forget your PIN 1 Remove any disc or USB storage device 2 Press and hold the J button on the front panel for 5 seconds or more All settings will revert to the factory default settings NOTES gt When the factory default settings are restored all the user stored BD data is deleted You can specify the display brightness and time zone v Front Display Lets you change the brightness of the front panel vZ Time Zone You can specify the time zone that is applicable to your area vZ Menu Transparency
58. eo stuttering or audio dropouts may occur depending on your environment gt You can connect to a device that supports AllShare Cast Note that connecting to such a device may not be fully supported depending on the manufacturer For further information on mobile connection support refer to the manufacturer s web site gt Bluetooth transmissions can interfere with the Screen Mirroring signal Before using the Screen Mirroring function we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device 50 English Using the Web Browser You can access the Internet using the Web Browser application Select Web Browser on the Home screen and then press the button NOTES gt When you run the Web Browser with the product connected by HDMI to a BD Wise compatible TV and BD Wise is on the browser is maximized to fill the screen and the TV s resolution is set to the optimal resolution automatically gt The Web Browser is not compatible with Java applications gt If you attempt to download a file and the file cannot be saved an error message will appear gt E commerce purchasing products online is not supported gt Activex is not supported gt Access may be blocked to some websites or to web browsers operated by certain businesses Link Browsing and Pointer Browsing The Web Browser provides two types of browsing Pointer Browsing and Link Browsing When you lau
59. er the numbers for that value following the instructions in Step 4 6 Repeat Steps 4 and 5 until you have filled in all values NOTES gt You can get the Network values from your Internet provider 7 When finished entering all the values select OK and then press the button The home cinema verifies the network connection and then connects to the network Wireless Network You can setup a wireless network connection in three ways Wireless Automatic Wireless Manual WPS PBC Before you configure the wireless network connection disconnect any wireless network device currently connected to the product or if applicable the product s current wired connection QU Wireless Automatic After following Steps 1 to 3 in Configuring Your Network Connection on page 26 1 In the Network Settings screen change Network type to Wireless The product searches for and then displays a list of the available networks Network Settings Select your network type Network type Wireless 2 Select the desired network and then press the button 3 On the Security screen enter your network s security code or pass phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with AV lt gt buttons and then pressing button 4 When finished select Done and then press the button The product verifies the network connection and then connects to t
60. es may not be available if you do not 10 Press the gt button twice The Setup Complete screen appears Press the amp J button English 45 S8DINIBS YIOMJON 90 Network Services Using Movies amp TV Shows You can download or stream for pay and free of charge movies and TV shows and view them on your TV Movies amp TV Shows Featured Recommended way TV Shows Featured Movies Purchased Favourites 1 Onthe Home screen select Movies amp TV Shows and then press the J button 2 Select one of the Featured or Recommended movies and then press the button The page for that movie appears OR Use the Y button to go to the bottom of the screen Select Favourites Featured Movies TV Shows or Purchased and then press the J button On the page that appears use the AV lt gt buttons to select a show or movie and then press the button On the TV Shows or Movies screen you can also select What s New Most Popular or Genres to see more available shows or movies On the Genre screen use the A Y lt P buttons to select a Genre and then press the amp J button To make a selection on a page displaying TV shows or movies use the A V lt P buttons to make a selection and then press the J button 3 To watch a selection select Watch Now and then press the button A selection screen appears listing various locations from which you can rent the film along with prices 4 Select a loc
61. f you do not configure the initial settings e The OSD On Screen Display may change in this product after you upgrade the software version e The access steps may differ depending on the menu you selected The Initial Settings Procedure lets you set the OSD and menu languages configure the connection to your home network choose the aspect ratio output Screen size and format that is correct for your TV and apply an upgrade to your product s software if one is available For complete Initial Settings instructions follow the order in the screen NOTES gt If you want to display the Initial Settings screen again and make changes select Settings gt System gt Setup in the Home screen or select the Reset option See page 23 The Home Screen Movies amp TV Shows 44 4 Add App Ei Add App J Add maa x Movies amp TV Shows Download movies and TV Shows from the Internet NOTES gt Depending on your country this menu function may not be supported ee Samsung Account ij Screen Mirroring Apps Access various for pay or free of charge applications 20 English Photos Videos amp Music Play photos videos or music content from Disc USB PC or mobile devices O Settings Set various functions to suit your personal preferences Recommended Apps A list of useful and popular apps we recommend you download O We
62. g the 3D content The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video you can not change the resolution to your preference e Some functions such as BD Wise screen size adjustment and resolution adjustment may not operate properly in 3D play mode You must use a high speed HDMI cable for proper output of the 3D signal Stay at least three times the width of the screen from the TV when watching 3D images For example if you have a 46 inch screen stay 3 5 meters from the screen Place the 3D video screen at eye level for the best 3D picture When the product is connected to some 3D devices the 3D effect may not function properly This product does not convert 2D content into 3D Blu ray 3D and Blu ray 3D logo are trademarks of the Blu ray Disc Association Copyright 2013 Samsung Electronics Co Ltd All rights reserved No part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd SAFETY INFORMATION Warning Disc Storage amp Management Handling Cautions Licence Using the 3D Function Copyright ar ww WwW PP GETTING STARTED 6 Disk and Format Compatibility 7 Logos of Discs the Product can Play 10 Accessories 11 Front Panel 11 Rear Panel 12 Toroidal Ferrite Core 13 Rem
63. he Product can Play do not match the disc will not play gt Blu ray The Region Number for this product is displayed on the Bluray Dist JL rear panel of the product i Blu ray Disc 3D Blu ray Disc Disc Type Area North America Central BD X DOLBY America South America GLI VE TRUEST DIGITAL PLUS Korea Japan Taiwan Hong DIGITAL PLUS Kong and South East Asia BD LIVE Dolby Blu ray Disc Europe Greenland French territories Middle East Africa Australia and New Zealand S dts HD S dts Master Audio Essential Neo Fusion India China Russia Central and South Asia DIS The U S U S territories and Canada PAL DI WX Europe Japan the Middle East Egypt Africa Greenland PAL broadcast system in DivX Taiwan Korea the Philippines U K France Germany etc Indonesia Hong Kong DVD VIDEO Mexico South America amp Central America Australia Java POWERED New Zealand Pacific Islands Caribbean Java Russia Eastern Europe India North Korea Mongolia China 6 e e ff NOTES gt If the Region number of a Blu ray Disc DVDs does not correspond to the Region number of this product the product cannot play the disc English 7 p pes Bune Zo Getting Started Supported Formats Video File Support File A Container Video Codec Resolution Flue ei Su ket Audio Codec Extension fps Mbps avi Divx 3 11 4 5 6 mkv ast MPEG4 SP ASP
64. he network NOTES gt You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem a Wireless Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network Settings values manually After following Steps 1 to 3 in Configuring Your Network Connection on page 26 1 In the Network Settings screen change Network type to Wireless The product searches for and then displays a list of the available networks 2 Scroll through the list select the desired network or Add Network and then press the button 3 Ifyou selected a network in Step 2 go to Step 6 If you selected Add Network go to Step 4 4 Enter your wireless network or wireless router s name e Enter numbers directly using the number buttons on your remote control e Enter letters by selecting a letter with the AV lt gt buttons and then pressing the button e To display capital letters or redisplay small letters if capital letters are displayed select 4p and then press the J button To display symbols and punctuation select 123 amp and then press the button To redisplay letters select 123 amp and then press the B button When finished select Done and then press the button 5 On the Security type screen that appears use the AY buttons to select the network s Security type and then press the button On t
65. he next screen enter your network s security code or pass phrase e Enter numbers directly using the number buttons on your remote control e Enter letters by selecting a letter with the A V lt gt buttons and then pressing the button When finished select Done and then press the button The product searches for the network English 27 sbuines vo Settings 6 The Network connection fail screen appears Use lt gt buttons to select IP Settings and then press the amp button 7 Select the IP setting field and then set it to Enter manually 8 Select a network value to enter IP Address for example and then press button Use the number keypad on your remote control to enter the numbers for the value You can also enter numbers using the A Y buttons Use the lt gt buttons on the remote control to move from entry field to entry field within a value When done with one value press the button 9 Press the A or button to move to another value and then enter the numbers for that value following the instructions in Step 8 10 Repeat Steps 8 and 9 until you have filled in all values NOTES gt You can get the Network values from your Internet provider 11 When finished select OK and then press the button The Security Screen appears 12 On the Security screen enter your network s Security Code or Pass Phrase Enter numbers directly using the number buttons on your remote control
66. hrough Samsung Apps 1 On the Apps screen select Samsung Apps and then press the button The Samsung Apps screen appears Across the top of the screen under What s New you ll see a series of new apps Use the lt gt buttons to scroll the list right or left and then select an app Press the button to see more information about the app If the app is free select Download and then press the button to download the app If it is a for pay app select Buy press the button and then follow the instructions on the screen NOTES gt To buy an app you must be logged into your Samsung account and have a credit card registered to the account Press the RED A button on your remote to log in If you haven t registered a card after you log in press the RED A button again and then select Change Account Information in the pop up that appears On the Change Account information page select Register Card press the button and then follow the directions on the screen You can also access and download apps from the categories listed on the left of the screen For instructions see Step 4 After the app has downloaded select Run and then press the button to run the app now To run the app later press the RETURN button In either case the icon for the app will appear on the Apps screen To see additional apps use the A Y lt gt buttons to move to the category list on the left side of the screen Use the A Y buttons
67. i Fi Direct function allows you to connect Wi Fi Direct devices to the product and each other using a peer to peer network without a wireless router NOTES gt Some Wi Fi Direct devices may not support the AllShare function if connected via Wi Fi Direct If this is the case change the network connection method you used to connect the device to the home cinema gt Wi Fi Direct transmissions can interfere with the Bluetooth signal Before you use the Bluetooth function we strongly recommend that you turn off the Wi Fi Direct function on any device in which it is currently on 1 Turn on the Wi Fi direct device and activate its Wi Fi Direct function 2 Inthe Home screen select Settings and then press the amp button 3 Select Network and then press the button 4 Select Wi Fi Direct and then press the button The Wi Fi Direct devices that you can connect appear AndroidXXXXXXX Disconnected You have three ways to complete the Wi Fi connection e Through the Wi Fi device e Through the product using PBC e Through the product using a PIN Each is covered below Through the Wi Fi Device 1 On the Wi Fi device follow the device s procedure for connecting to another Wi Fi Direct device See the device s user manual for instructions When you have completed the procedure you should see a pop up on your TV screen saying that a device that supports Wi Fi Direct has requested to connect Select OK
68. ing playback press the TOOLS button Select to move to the previous Previous picture Next Select to move to the next picture Start Stop Slide Show Select to play pause the slide show Speed Select to set a slide Slideshow show s speed Settings Effects Select to set a slide show s special effects Select to enlarge the current Zoom picture Enlarge up to 4 times Select to rotate the picture This will Displays all the folders Rotate rotate the picture either clockwise Folder on the media or storage or counter clockwise device z Background Select to listen to music while Starts the slide show Music viewing a slide show Shows all the files in the current folder one after Picture Mode another If you want to U Dynamic Choose to increase create a slide show with a g Sharpness selected group of photos Standard Choose for most see Play Selected below viewing applications Setti Movie This is the best setting T oe pis you ettings create a playlist by for watching movies ae selecting specific files to User Lets you adjust the Play play It works essentially sharpness and noise reduction Selected the same way for all function respectively Options media See Creating a Information Shows the picture Playlist on an Audio CD information on page 38 Equalizer Customize your own personal Select Send to upload Mode sound preferences using the selected files to on line equali
69. ing the Network Status function Check whether a USB memory device is connected to the product The memory device must have at least 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management See page 54 See if the BD LIVE Internet Connection option is set to Allow All If all above fails contact the contents provider or update to the latest firmware The memory device must have at least 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management See page 54 gt When the factory default settings are restored all stored user BD data will be deleted CEO Hereby Samsung Electronics declares that this Home Cinema System is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The official Declaration of Conformity may be found at http www samsung com go to Support gt Search Product Support and enter the model name This equipment may be operated in all EU countries This equipment may only be used indoors 160 English Specifications General FM Tuner HDMI Amplifier Weight Dimensions Operating Temperature Range Operating Humidity Range Signal noise ratio Usable sensitivity Total harmonic distortion Video Audio Front speaker output Front Top speaker output Centre speaker output Surround speaker output Subwoofer speaker output Frequency res
70. k on manually during the update process In the Home menu select Settings and then press the button Select Support and then press the button Select Software Update and then press the button To download update software and update now select Update now and then press the button See Update now on next page for details To let the product download update software automatically when available select Auto update and then press the button See Auto update on the next page for details NOTES gt The upgrade is complete when the product turns off and then turns on again by itself Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade If you want to cancel the upgrade while the upgrade software is downloading press the button When a system upgrade is progress UPDATE is displayed on the front panel English 29 Settings Update now You can use Update now to update the software through your network connection or by using a USB flash drive The network instructions are below The USB flash drive instructions are on this page 1 Select Update now and then press the amp button The Update now pop up appears 2 The product searches on line for the latest software version 3 If it does not find an update the There are no new updates for you at the moment pop up app
71. l as information about what type of program they broadcast such as sports or music etc When tuned to an FM station which provides the RDS service the RDS indicator lights up on the display 42 English Description on RDS function e PTY Program Type Displays the type of program currently being broadcast e PS NAME Program Service Name Indicates the name of broadcasting station and is composed of 8 characters e RT Radio Text Decodes the text broadcast by a Station if any and is composed of maximum 64 characters e CT Clock Time Decodes the real time clock from the FM frequency Some stations may not transmit PTY RT or CT information therefore this may not be displayed in all cases e TA Traffic Announcement TA ON OFF it shows that the traffic announcement is in progress NOTES gt RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak To show the RDS signals You can see the RDS signals the station sends on the display Press the RDS DISPLAY button while listening to an FM station e Each time you press the button the display change to show you the following information PS NAME gt RT CT gt Frequency While searching lt PS NAME gt Paice appears and then the station names g will be displayed lt NO PS gt appears Service l if no signal is sent While searching lt RT gt appears RT and then tex
72. lect Play Selected and NOTES then press the button The Play Selected screen gt Depending on the disc or storage device the Options lea menu may differ All options may not be displayed 3 Use the A Y buttons to select a track and then press the button A check appears to the left of Repeating Tracks on an Audio CD the track You can set the product to repeat tracks on an audio CD 4 Repeat Step 3 to select and check additional tracks CD DA MP3 5 To remove a track from the list move to the track and then press the button again The check on 1 During playback use the A V lt gt buttons to select heade ionnd D in the lower left corner of the screen and then press the button 6 When done press the A Y buttons to select Play and then press the J button The Music Playback screen reappears listing only the tracks you checked The selected tracks play automatically 2 Use the AY to select the Repeat mode you want Off One Song or All and then press the button NOTES gt You can create a playlist with up to 99 tracks from options Audio CDs CD DA gt If you have created a playlist Play Selected is pen replaced by Edit playlist on the Options menu Be oe gt On the Play Selected screen you can also choose TRACK 005 Select All Deselect All and Cancel TRACK 001 TRACK 006 e Use Select All to select all tracks This cancells N B an your individual track selections When you press Be the
73. lution your TV cannot support for example 1080p you may not see a picture on your TV No HDMI output Abnormal HDMI output screen Check Remedy Are you using a disc that does not contain menus You can play 16 9 Blu ray DVD discs in 16 9 Full mode 4 3 Letter Box mode or 4 3 Pan Scan mode but 4 3 Blu ray DVD discs are played in 4 3 ratio only Refer to the Blu ray Disc jacket and then select the appropriate function Press and hold the remote control s J button for 5 seconds in STANDBY mode Using the RESET function will erase all stored settings Do not use this unless necessary With no disc in the product press and hold the product s J button for longer than 5 seconds INIT appears on the display and all settings will return to the default values Then press the POWER button Using the RESET function will erase all stored settings Do not use this unless necessary Is the antenna connected properly If the antenna s input signal is weak install an external FM antenna in an area with good reception If the OPEN CLOSE button is pressed while listening to TV audio using the D IN or AUX functions the Blu ray DVD disc functions are turned on and the TV audio is muted The features or action cannot be completed at this time because 1 The Blu ray DVD disc s software restricts it 2 The Blu ray DVD disc s software doesn t support the feature e g angles 3 The feature is not available at the m
74. make a wireless connection you need to run an ID Set between the product and wireless receiver module With the product turned off press 0 gt 1 gt 3 gt 5 on the remote control Turn on the wireless receiver module Then press and hold the ID SET button on the back of the wireless receiver module for 5 seconds and then turn the product on English 17 SUOIJOBUU0D g0 Connections Connecting to TV External Devices AUX IN FM ANT a A cree C ooo SS External HDMI IN A HDMI OUT OPTICAL OUT Devices Connecting to a TV Connect an HDMI cable not supplied from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV If you have set the product s remote control to operate your TV press the TV SOURCE button on the remote control and select HDMI as the external source of the TV Connecting to External Devices To select the correct mode for an external device press the FUNCTION button Each time you press the button the mode changes in this order BD DVD gt D IN gt AUX gt HDMI1 gt HDMI2 gt FM gt BT Method 1 HDMI IN Connecting to an External Component with a HDMI Cable Connect an HDMI cable not supplied from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device S Select the HDMI1 or HDMI2 mode Method 2 AUX IN Connecting an External Analogue Component Using a R
75. movie by pressing the J button on the product or the remote To play the movie you must select Play Movie or Start in the disc menu and then press the button gt If you use the Internet service or play the USB device contents on the TV you cannot select the BD DVD mode with the FUNCTION button Stop the playing contents on the TV first to select the BD DVD mode Rear Panel FM ANTENNA Rein AUX IN SPEAKER OUTPUT LAN TERMINAL CONNECTORS COOLING FAN ee eo JLB DIGITAL AUDIC IMPEDANCE 30 HDMI OUT HDMI IN EXTERNAL DIGITAL AUDIO IN OPTICAL POWER CORD Connecting the FM Antenna 1 Connect the FM antenna supplied to the FM ANT Jack 2 Slowly move the antenna wire around until you find a location where reception is good then fasten it to a wall or other rigid surface NOTES gt Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation Do not obstruct the cooling fan or ventilation holes gt This product does not receive AM broadcasts English 11 poues Bue zo Getting Started Toroidal Ferrite Core For the Power Cord lt Main Unit gt lt SWA 6000 gt If you attach a Toroidal ferrite core to the power cord it will help to prevent RF interference from radio signals 1 Pull the fixing tab of the Toroidal ferrite core to open it 2 Make a loop twice in the power cord 3 Attach the Toroidal ferrite core to th
76. nch the browser for the first time Pointer Browsing is active If you are using a mouse to navigate in the Web Browser we recommend leaving Pointer Browsing active If you are using your remote to navigate in the Web Browser we recommend that you replace Pointer Browsing with Link Browsing Link Browsing moves a highlight from one link to the next in the Web Browser and is much faster than Pointer Browsing if you are using your remote To activate Link Browsing follow these steps 1 Usethe AY lt P buttons on your remote to move the pointer to the Link Browser icon on the top right of the screen The Link Browser icon is the third icon from the right The pointer will be in the correct position if the icon turns blue and the words Link Browsing appear on the screen 2 Press the amp button Link Browsing is activated and will remain active whenever you bring up the Web Browser The Control Panel at a Glance The Control Panel which runs across the top of the screen has a series of icons which start a number of useful functions The icons are described below starting with the icon on the far left of the screen S Tr GUE eee EE 100 ex e 5 Moves to the previous page e E Moves to the next web page e 4 Displays the Bookmarks and History screen You can bookmark the current page select an existing bookmark and edit and delete bookmarks You can also view your browsing history and selec
77. ne memory device into a multi card reader may cause the reader to operate improperly The product does not support the PTP protocol Do not disconnect a USB device during a loading process The bigger the image resolution the longer the image takes to display This product cannot play MP3 files with DRM Digital Rights Management downloaded from commercial sites Your product only supports video that is under 30fos frame rate Your product only supports USB Mass Storage Class MSC devices such as thumb drives and USB HDD HUB is not supported Certain USB HDD Devices multi card readers and thumb drives may not be compatible with this product If some USB devices require excessive power they may be limited by the circuit safety device If playback from a USB HDD is unstable provide additional power by plugging the HDD into a wall socket If the problem continues contact the USB HDD manufacturer SAMSUNG is not responsible for any data file damage or data loss English 9 paves Bune zo Getting Started AVCHD Advanced Video Codec High Definition e This product can play back AVCHD format discs These discs are normally recorded and used in camcorders e The AVCHD format is a high definition digital video camera format e The MPEG 4 AVC H 264 format compresses images with greater efficiency than the conventional image compressing format e Some AVCHD discs use the x v Colour format This product can
78. nection To Download the AllShare Software AllShare makes it easy to retrieve and enjoy media files from computers and DLNA enabled devices However computers need to be installed with AllShare PC and mobile devices need to support AllShare For more information visit the Samsung Content amp Service portal nttp link samsung com NOTES gt You may experience compatibility issues when attempting to play media files via a third party DLNA server Playing Content Located on your PC or 1 Connect the product your PC and your DLNA compatible cellular phone to the same wireless DLNA Device through the Product none n oO PC 2 Follow the directions in the AllShare software m Product Installation Instruction manual to set up devices and files for playing or viewing Play back PC s files 3 On your computer using the AllShare software confirm your phone is connected Kejd eipe 4 Onthe phone select the file you want to view or play and then select the Home cinema system as AllShare Connection the playback device 5 On the phone start playback 1 Connect the product your PC and or your DLNA compatible device to the same wireless network z 2 Follow the directions in the AllShare software Controlling Video Playback e n a You can control the playback of video content located on os J a Blu ray DVD disc USB device mobile device or PC 3 Select Photos Videos amp Music on th
79. nterconnect with each other easily press the button The Ripping screen appears using a short wireless connection 4 Use the AY buttons to select a track and then e A Bluetooth device may hum or malfunction press the button A check appears to the left of When a part of your body is in contact with the the track receiving transmitting system of the Bluetooth device 5 Repeat Step 4 to select and check additional tracks or the Home Cinema When it is subject to electrical variation from 6 To remove a track from the list move to the track obstructions caused by a wall corner or office and then press the button again The check on partitioning neti aersls TENIQVEN When it is exposed to electrical interference from 7 When done select the Rip button using the A Y same frequency band devices including medical buttons and then press the gj button equipment microwave ovens and wireless LANs The Rip pop up appears e Pair the Home Cinema with the Bluetooth device while 8 Use the AY buttons to select the device to store the two are close together the ripped files on and then press the gj button e The further the distance is between the Home Cinema NOTES and the Bluetooth device the worse the quality is If the distance exceeds the Bluetooth operational gt Do not disconnect the device while ripping is in range the connection is lost progress In poor reception sensitivity areas the Bluetooth 9 Ifyou want to cancel
80. o an AC procedures other than those specified herein may result outlet with a protective grounding connection in hazardous radiation exposure e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore CAUTION eT PUEN ae Ceol OPATERE e INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM Wiring the Main Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BS1362 of the same rating must be used Never use the plug with the fuse cover removed If the cover is detachable and a replacement is required it must be of the same colour as the fuse fitted in the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitable safety approved extension lead or consult your dealer for assistance However if there is no alternative to cutting off the plug remove the fuse and then safely dispose of the plug Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord Never attempt to insert bare wires directly into a mains socket A plug and fuse must be used at all times IMPORTANT The wires in the
81. oment 4 You ve requested a title or chapter number or search time that is out of range Press and hold the J button on front panel for more than 5 seconds with no disc in the product All settings will revert to the factory settings Check the connection between the TV and the HDMI jack of the product Check if your TV supports 576p 480p 720p 1 080i 1080p HDMI input resolution If random noise appears on the screen it means that TV does not support HDCP High bandwidth Digital Content Protection English 59 xipueddy 0 Appendix Symptom Check Remedy AllShare function can see folders shared through AllShare but cannot see the files Video is played intermittently The AllShare connection between the product and PC is unstable BD LIVE cannot connect to the BD LIVE server When using the BD LIVE service an error occurs NOTES AllShare only shows Video Photo and Music files Other types of files are not displayed Check if the network is stable Check if the network cable is properly connected and if the network is not overloaded The wireless connection between the DLNA compatible device and the product is unstable Check the connection IP address under the same subnetwork should be unique otherwise IP collision can results in such a phenomenon Check if you have a firewall enabled If so disable the firewall function Test whether the network connection is active by us
82. ote Control CONNECTIONS 15 Connecting the Speakers 18 Connecting to TV External Devices 19 Connecting to a Network Router SETTINGS 20 The Initial Settings Procedure 20 The Home Screen 20 Accessing the Settings Screen 21 Settings Menu Functions 25 Auto Sound Calibration 26 Networks and the Internet 29 Upgrading Software 31 31 32 32 33 36 40 41 43 45 45 46 46 50 50 53 53 54 58 61 MEDIA PLAY The All Content Screen es Playing Commercial Discs Playing Files on a USB Device y Playing a Disc with User Recorded Content D Using the AllShare Network Function Controlling Video Playback o Controlling Music Playback 3 Playing Photo Contents 5 Listening to Radio Using the Special Effects Remote Control Buttons NETWORK SERVICES Logging In to Your Samsung Account Before Using Movies amp TV Shows or Apps Using Movies amp TV Shows Using Apps Screen Mirroring Using the Web Browser Linking your Internet Service Accounts to the Product BD LIVE APPENDIX Additional Information Troubleshooting Specifications Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual b you bring the unit to a repair centre and there is no defect in the
83. pending on the disc or contents some of the functions described in this manual may not be available Buttons on the Remote Control used for Music Playback PTY SEARCH PTY NUMBER buttons If numbered tracks are displayed press the number of a track The selected track is played o A buttons Move to the previous next track O button Stops a track Fast Play Audio CD CD DA only O During playback press the or O button Each time you press the 8 or button the playback speed will change button Pause a track O button Plays the currently selected track Music Screen Controls TRACK 001 ie ei Gc yasxyiEyv Advance the track Q Repeat one track or all tracks IE Play tracks in random order cy i cD im To access the controls play a track and then use the AY lt P buttons to move to the control of your choice NOTES gt The Music Screen controls are only accessible when a track is playing gt All controls do not appear at the same time TRACK 002 TRACK 003 TRACK 004 TRACK 005 TRACK 006 TRACK 007 TRACK 008 TRACK 009 TRACK 010 Pause a track Play a track Move to the previous track Move to the next track Rewind the track Display the Equaliser nets Adjust the equaliser manually sik Only when equaliser mode is on View Options Using the View amp Options
84. play back AVCHD discs that use the x v Colour format e x v Colour is a trademark of Sony Corporation e AVCHD and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co Ltd and Sony Corporation NOTES gt Some AVCHD format discs may not play depending on the recording conditions gt AVCHD format discs need to be finalised gt x v Colour offers a wider colour range than normal DVD camcorder discs gt Some DivX MKV and MP4 format discs may not play depending on their video resolution and frame rate Accessories Check for the supplied accessories below QQ For Power cord QQ For Speaker cable User Manual Toroidal Ferrite Core ASC microphone Se FM Antenna Power Cable Soft Cloth RRS MNIMINDAT O i Remote Control Batteries AAA size 10 English Front Panel VACUUM TUBE AMP PLAY PAUSE STOP FUNCTION OPEN CLOSE DISC TRAY REMOTE CONTROL SENSOR DISPLAY VOLUME CONTROL NOTES gt Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the product can cause audio noise or distortion gt When the product is on do not let children touch the product s surface It will be hot gt To upgrade the product s software through the USB jack you must use a USB flash drive gt When the product displays the Blu ray Disc menu you cannot start the
85. playing a 3D movie press the J button once The Blu ray menu appears Press the J button again then select 3D Settings in the Blu ray menu Depending on the content and the position of the picture on your TV screen you may see vertical black bars on the left side right side or both sides TV Aspect Ratio Depending on the disc type some aspect ratios may not be available If you select an aspect ratio and option which is different than the aspect ratio of your TV screen then the picture might appear to be distorted If you select 16 9 Original your TV may display 4 3 Pillarbox black bars on sides of picture BD Wise Samsung Products only When BD Wise is on the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu If the product is connected to a device that does not support BD Wise you can not use the BD Wise function For proper operation of BD Wise set the BD Wise option in both the product and the TV to On 54 English Digital Output Be sure to select the correct Digital Output or you will hear no sound or just loud noise If the HDMI device AV receiver TV is not compatible with compressed formats Dolby Digital DTS the audio signal outputs as PCM Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects Some Blu ray Discs do not have BONUSVIEW audio and Navigation Sound Effects This Digital Output setup does not affect the analogue L R
86. ponse S N Ratio Channel separation Input sensitivity 3 30 kg 430 00 W x 55 00 H x 314 50 D mm 5 C to 35 C 10 to 75 55 dB 12 dB 0 5 2D 2160p 1080p 1080i 720p 576p 480p 3D 1080p 720p PCM multichannel audio Bitstream audio PCM audio 165W x 2 30 165W x 2 30 170W 3Q 165W x 2 30 170W 3Q Analogue input 20HZ 20kHz 3dB Digital input 20HZ 40KHz 4dB 70dB 60dB AUX 500mV English 61 xipueddy 70 Appendix Speaker 7 1ch speaker system Speaker E Frequency Output sound Rated Maximum Dimensions Weights system p range pressure level input input W x H x D Unit mm Unit kg Front 90 0 x 1302 0 x 70 0 765 Front Top Stand base 250 x 250 140Hz 165W 330W Sound 20kHz 87dB W M Eoo y O x 1252 0 x 70 0 6 82 30 Stand base 250 x Eoo y Centre 360 0x70 0x65 9 O 360 0x70 0x65 9 70 0 x 65 9 0 98 40Hz 170W 340W 160Hz 88dB W M 205 6 x 390 6 x 350 6 6 33 e Network speeds equal to or below 10Mbps are not supported e Samsung Electronics Co Ltd reserves the right to change the specifications without notice e Weight and dimensions are approximate e Design and specifications are subject to change without prior notice e For the power supply and Power Consumption refer to the label attached to the product Subwoofer a SWA 6000 Weight 1 1 kg Dimensions W x H x D 76 2 x 228 6 x 152 4 mm Operating Temperature Range 5 C to 35 C Oper
87. ppears 5 Using the keyboard enter your password When finished select the Done button and then press the button The Log In screen re appears 6 To make the log in process easier next time select Sign me in automatically and then press the button 7 Select Log in and then press the J button The product logs you in to your account Your account e mail is displayed on the bottom left of the screen NOTES gt If you selected Sign me in automatically the next time you log in the product will automatically enter your e mail and password All you need to do is select Log In gt If your e mail address and password are not displayed when the Log In screen appears select the button with the down pointing arrow head next to the Email field and then press the button A drop down list of all your registered accounts will appear Select your account and then press the button The product will fill in the e mail and password fields gt If you press the RED A button after you have logged in the My Account pop up appears On the pop up you can select Logout Change Account Information Link Service Accounts Remove Accounts from the Device and Deactivate Account To rent movies and purchase for pay apps you must have a credit card registered in your account If you haven t registered a card select Change Account Information On the Change Account information page select Register Card press the button and then
88. product Reverts all settings to their defaults except for the network and Smart Hub settings and then starts the Setup function Requires that you enter your security PIN The default security PIN is 0000 Auto Sound Calibration By setting the Auto Sound Calibration ASC function just once when you relocate or install the product you can have the product automatically recognize the distance between speakers levels between channels and frequency characteristics to create a 7 1 channel sound field optimized for your environment Auto Sound Calibration Select whether to run and apply automatic sound calibration e Off Produces sound according to the speaker configuration specified in speaker settings e On Runs Auto Sound Calibration and produces sound according to the calibrated speaker settings Measurement Before running the calibration make sure no disc is left in the disc tray 1 Plug the ASC microphone into the ASC IN jack 2 Place the ASC microphone at the listening position e Auto Sound Calibration automatically sets up speakers in the following sequence Front L gt Centre gt Front R gt Surround R gt Front Top R gt Front Top L gt Surround L gt Subwoofer e Press the RETURN button to cancel the Auto Sound Calibration Setting English 25 sbuines po Settings When you connect this product to a network you can use network based applications and functions such as
89. product i e where you have failed to read this user manual The amount of such administration charge will be advised to you before any work or home visit is carried out English 5 Getting Started Disc Types and content your Product can Play Media Disc Type Details eee BD ROM or BD RE R disc recorded in the BD RE format 3D Blu ray Disc VIDEO DVD VIDEO DVD RW DVD VIDEO recorded DVD RW DVD RW V DVD R R discs that have DVD R DVD RW been recorded and finalised or a USB storage media containing Divx DVD R MKV MP4 contents D RW R 2 T Music recorded on CD RW R DVD RW R BD RE R discs or a USB MUSIC oe storage media containing MP3 or WMA contents BD RE R g g D RW R aa Photos recorded on CD RW R DVD RW R BD RE R discs or a USB PHOTO EAN storage media containing JPEG contents BD RE R g J NOTES The product may not play certain CD RW R and DVD R because of the disc type or recording conditions If a DVD RW R disc has not been recorded properly in DVD video format it will not be playable Your product will not play content that has been recorded on a DVD R at a bit rate that exceeds 10 Mbps Your product will not play content that has been recorded on a BD R or USB device at a bit rate that exceeds 30 Mbps gt Playback may not work for some types of discs or when you use specific operations such as angle change and aspect ratio adjustment Information about the discs is written in detail
90. pyright information for the Web Browser Web Browser Settings Provides basic information about Help the operation of the Web Browser NOTES gt Depending on the web site some of the Web Browser Setting functions may not be activated Functions that are not activated are greyed out and cannot be used Linking your Internet Service Accounts to the Product The Link Service Accounts function lets you link your product to your accounts with Internet services that the product can log you in to the service automatically when you start the app for that service To create a service account link follow these steps 1 On the Home screen press the RED A button on your remote to log in to your Samsung Account 2 After you have logged in press the RED A button on your remote again 3 Select Link Service Accounts in the My Account pop up and then press the button 4 Onthe Link Service Accounts screen select the service you want to link to the product and then press the J button 5 Select Register and then press the button 6 Inthe ID and Password screen enter the ID you use to log in to the service you selected using the pop up keyboard When finished select Done and then press the amp button 7 Repeat the same process for the password When finished select Done and then press the button 8 Select OK and then press the J button BD LIVE Once the product is connected to your
91. ront top and centre speakers the surround speakers are used mainly for sound effects Sound will not come from them all the time Subwoofer The position of the subwoofer is not so critical Place it anywhere you like Surround speakers must be connected to the wireless receiver module Speaker Components Centre Front Front Top x2 Surround x 2 Stand x 4 Stand Base x 4 Screw 5x20 x 16 Speaker Cable x 2 SWA 6000 Wireless Receiver Subwoofer Module English 15 Connections Installing the Speakers on the Tallboy Stand 1 Straighten the speaker cable and put it into the hole on the Stand Base Turn the Stand Base upside down and connect it to the Stand Use the driver to combine the screws on the 3 marked holes Connect the upper Speaker to the assembled Stand Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver This is the appearance after the speaker is installed Follow these steps to install other speaker Connecting The Speakers 1 Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker To attach speaker wire to each speaker a Press down the red tab on the back of the speaker insert the red wire and then release the tab b Press down the black tab on the back of the speaker insert the black wire and then release the tab Connect the
92. s move the highlight to the Caps key on the top left and then press the button Press the button again with the Caps key highlighted to access small letters again 4 To access symbols and additional punctuation marks highlight the 123 amp button on the left and then press the amp J button 5 To delete a character you entered move the highlight to the button and then press the button 6 To delete all the characters you entered move the highlight to the Clear button and then press the button 7 When finished entering move the highlight to the Done button and then press the J button NOTES gt If you have a wireless keyboard connected to your product you can use the wireless keyboard to enter letters numbers symbols and punctuation Note that the wireless keyboard will work only when the keyboard popup appears and can only be used to enter letters numbers symbols and punctuation English 51 SODINIBS YIOMJON 90 Network Services Options on the Keyboard Pop Up To access the keyboard pop up options highlight the ksd button on the bottom left of the keyboard and then press the J button Select the language for the Language keyboard You can select English French Russian etc The keyboard will suggest Recommended recommended words as you enter Text text You can turn this function On or Off The keyboard will predict the next letter as you enter letters The predictions app
93. scs 1 Place a user recorded disc into the disc tray with the disc s label facing up and then close the tray The Device Connected pop up appears 2 Use the AY buttons to select the type of content you want to view or play Photos Videos or Music and then press the J button NOTES gt Even though the product will display folders for all content types it will only display files of the Content Type you selected in Step 2 For example if you selected music you will only be able to see music files You can change this selection by returning to the Home screen and repeating Step 2 32 English 3 A screen appears listing the contents of the disc Depending on how the contents are arranged you will see either folders individual files or both 4 f necessary use the AV lt P buttons to select a folder and then press the J button 5 Usethe AV lt gt buttons to select a file to view or play and then press the amp button 6 Press the RETURN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the Exit button to return directly to the Home Screen 7 Goto pages 33 41 for instructions that explain how to control playback of videos music and pictures on a disc Using the AllShare Network Function AllShare lets you play Photos Videos or Music located on your PC or your DLNA compatible device through the product using a wireless network con
94. ser settings sites Picasa Facebook _ etc or devices To use Equaliser This function is only available when Send you need to Settings Equaliser Mode is On aciablichanaccountwin the on line site and then NOTES log in using the Log In gt Depending on the disc or storage device the Options function menu may differ All options may not be displayed gt To enable the background music function the photo NOTES file must be in the same storage media as the music gt Depending on the disc or storage device the Options file However the sound quality can be affected by the menu may differ All options may not be displayed bit rate of the MP3 file the size of the photo and the encoding method Listeni to Radi gt You can t enlarge the subtitle and PG graphic in the Istening to Radio full screen mode Using the View and Options Menus Using Buttons on the Remote Control When you See the Photo File List 1 Press the FUNCTION button to select FM 2 Tune to the desired station Photos e Preset Tuning 1 Press the E button to select Preset and then press the TUNING CH A V Groups all the photo files button to select the preset station on the media or storage Before you can tune to preset stations you device by Date Click a must add preset stations to the product s group to see the photos in memory See page 42 for instruction View that group Displays all the photo files Title on the media or storag
95. shortly on the Display part on the Front panel then change to D IN TV SOUND ON Output to Home theatre speakers TV SOUND OFF Output to Anynet connected TV Speaker Q Use in this case 1 If you want to listen to the sound via home cinema speaker when you watch a TV 2 lf you want to listen to the sound from the USB media that plugged to the TV via home cinema speaker a TV SOUND ON OFF support specification Anynet HDMI CEC Connected TV Anynet HDMI CEC supported TV Anynet HDMI CEC not No operation supported TV Network Seric You can enjoy various network services such as streaming video or on line apps by connecting the product to your network To use network services you must first 1 Connect the product to the network See page 19 2 Configure the network settings See pages 26 28 Logging In to Your Samsung Account Before you access Movies amp TV Shows or Apps we suggest you log in to your Samsung account To log in to your Samsung account follow these steps 1 With the Home screen displayed press the RED A button The Log In screen appears 2 Select the Email field and then press the button The keyboard pop up appears 3 Using the keyboard enter your e mail address When finished select the Done button and then press the button The Log In screen re appears 4 Select the Password field and then press the button The keyboard pop up a
96. software update server If this occurs contact your Internet Service Provider ISP for more information gt DSL users please use a router to make a network connection gt To use the AllShare function you must connect your PC to your network as shown in the illustrations on the above The connection can be wired or wireless Broadband service NOTES gt If your wireless IP router supports DHCP this product can use a DHCP or static IP address to connect to the wireless network gt Set your wireless IP router to Infrastructure mode Ad hoc mode is not supported gt The product supports only the following wireless security key protocols WEP OPEN SHARED WPA PSK TKIP AES WPA2 PSK TKIP AES gt Select a channel on the wireless IP router that is not currently being used If the channel set for the wireless IP router is currently being used by another device nearby it will result in interference and communication failure gt In compliance with the newest Wi Fi certification specifications Samsung home cinema do not support WEP TKIP or TKIP AES WPS2 Mixed security encryption in networks running in the 802 11n mode gt Wireless LAN by its nature may cause interference depending on the operating conditions AP performance distance obstacles interference by other radio devices etc English 19 SUOIJIBUU0D g0 Settings e The Home menu will not appear i
97. sound from the TV to the Home Cinema speakers Requires a HDMI connection and an Audio Return Channel ARC compatible TV e f Audio Return Channel is set to on and you are using an HDMI cable to connect the product to the TV digital optical input will not work e f Audio Return Channel is set to auto and you are using an HDMI Cable to connect the product to the TV ARC or digital optical input is selected automatically Lets you set the Digital Output to match the capabilities of the AV receiver you ve connected to the product For more details please refer to the digital output selection table See page 56 Lets you apply dynamic range control to Dolby Digital Dolby Digital Plus and Dolby TrueHD audio Y Auto Automatically controls the dynamic range of Dolby TrueHD audio based on information in the Dolby TrueHD soundtrack Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus V Off Leaves the dynamic range uncompressed letting you hear the original Sound Y On Turns dynamic range control on for all three Dolby formats Quieter sounds are made louder and the volume of loud sounds is reduced Lets you select the multi channel downmix method that is compatible with your stereo system You can choose to have the product downmix to normal stereo or in surround compatible stereo Smart Features When the product is attached to a digital TV lets you adjust the audio A
98. t and then press the button Depending on how the contents are EW ale Commercial Discs arranged you will see either folders individual files or both 1 Press the amp button to open the disc tray NOTES 2 Place a disc gently into the disc tray with the disc s gt Even though the product will display folders for all label facing up content types it will only display files of the Content Type you selected in Step 3 For example if you selected music you will only be able to see music files You can change this selection by returning to the Photos Videos amp Music screen and then going to Step 4 in Method 2 below 4 If necessary use the A lt P buttons to select a folder and then press the button 5 Select a file to view or play and then press the button 6 Press the RETURN button to exit a folder or the Exit button to return to the Home screen 3 Press the amp button to close the disc tray Playback starts automatically 4 If playback does not start automatically press the O button on the remote or see The All Content Screen above Go to pages 33 41 for instructions that explain how to control playback of videos music and pictures on a USB device Playing Files on a USB Device Method 2 There are two methods you can use to play or view 1 Turn the product on multimedia files located on a USB device through your 2 Connect the USB device to the USB port on the product front panel of
99. t a page to revisit Moves to the Home screen of the Web Browser o http www samsung com Lets you enter a page address manually using the keyboard pop up e J Reloads the current page so that it is refreshed on the screen e Adds the current page to your bookmarks ea Lets you search for information by entering words or characters using the keyboard pop up See Using the Keyboard Popup on this page Lets you enlarge or shrink the screen by various percentages e Turns on the PIP function e Lets you switch between Pointer Browsing and Link Browsing e E Lets you configure the Browser s settings See Using the Setting Menu on page 52 e 3 Closes the Web Browser Using the Keyboard Pop up When you click the http Awww samsung com the IQ or access a data or text entry field and then press the button the keyboard pop up appears oe ee O http www samsung com MmMMmmeAREeems ee As you enter characters recommended text will be shown caps 7 2 m o e e Br rg Clear q i 0 toy om aus ma EKS E Boy a b n Cancel w 123 amp a s za ER be e EE df c v To use the keyboard pop up with your remote follow these steps 1 Usethe AY lt P buttons on your remote to move the highlight to a letter or number of your choice 2 Press the button to enter the letter or number into the entry field 3 To access capital letter
100. t messages the station RadioText sends will be displayed lt NO RT gt appears if no signal is sent Frequency Station frequency non RDS service About characters shown in the display When the display shows PS or RT signals the following characters are used e The display window cannot differentiate upper case and lower case letters and always uses upper case letters e The display window cannot show accented letters lt A gt for instance may stands for accented lt A s gt like lt A A A A Aand A gt PTY Program Type indication and PTY SEARCH function One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes To search for a program using the PTY codes Before you start The PTY Search is only applicable to preset stations To stop searching any time during the process press O button while searching There is a time limit in doing the following steps If the setting is cancelled before you finish start from step 1 again When pressing the buttons on the primary remote control make sure that you have selected the FM station using the primary remote control RDS DISPLAY i 2 3 PTY PTY SEARCH PTY 4 5 6 Press the PTY SEARCH button while listening to an FM station Press the PTY or PTY button until the PTY code you want appears on the display e The display gives you the PTY codes described
101. t to listen to a 2CH sound source in 5 1CH surround sound with all soeakers active A specific speaker s may not output depending on the input signal Off Select for normal listening English 43 GO Aejd eipe Media Play a SFE Mode Symphony Hall in Boston Hall 1 gt Philharmonic Hall in Bratislava Hall 2 gt Jazz Club in Seoul B gt Church in Seoul gt Amphitheater Rock gt Off e Symphony Hall in Boston Hall 1 Provides a clear vocal as if listening in a concert hall e Philharmonic Hall in Bratislava Hall 2 Also provides a clear vocal as if listening in a concert hall but less powerful than HALL1 e Jazz Club in Seoul B Recommended setting for Jazz e Church in Seoul Gives the feel of being in a grand church e Amphitheater Rock Recommended setting for Rock e Off Select this for normal listening 3D Sound You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options Off gt High gt Low NOTES gt 3D Sound is not available in FM mode TV Sound You can listen via Home theatre speakers or TV Speaker with TV SOUND button 1 Connect the HDMI cable to TV and Home cinema See page 18 2 Set the connected Home cinema and TV to Anynet HDMI CEC On 3 Press the TV SOUND button on the remote control 144 English 4 Each time you press the TV SOUND button TV SOUND ON OFF flashes
102. t to other external components Before moving or installing the product be sure to turn off the power and disconnect the power cord Connecting the Speakers Front P 7 Subwoofer Surround R i Front Front Top L Surround L Wireless Receiver Modul 4 A Position of the product Place it on a stand or cabinet shelf or under the TV stand Selecting the Listening Position SUOIJ9UU0D g0 l The listening position should be located about 2 5 to 3 times the distance of the TV s screen size away from the TV For example if you have a 46 inch screen locate the listening position 2 92 to 3 50 meters from the screen Place these speakers in front of your listening position facing inwards about 45 toward you Front Front Top Place the front speakers so that their tweeters will be at the same height as your ear Align Speakers the front face of the front front top speakers with the front face of the centre speaker or place them slightly in front of the centre speakers It is best to install the Centre Speaker at the same height as the front front top speakers You Genie 2 nSe eh can also install it directly over or under the TV Place these speakers to the side of your listening position If there isn t enough room place these speakers so they face each other Position them about 60 to 90cm above your ear Surround facing slightly downward Speakers p Unlike the front f
103. tep mode e To return to normal speed playback press the D button oO Starts playback oO Stops playback Search Scene oO Pauses playback During playback press the BJ or O f button beat on Each time you press the K or D y button the playback speed will change Slow Motion In pause mode press the amp button Play Each time you press the E3 button the playback speed will change Search Titles Step Motion In pause mode press the JJ button Play Each time you press the JJ button a new frame appears During playback press the or GJ s button APA Each time you press the or y button the disc moves to the previous or next chapter or file Chapter Search Using the TOOLS Menu During playback press the TOOLS button Select to return to the beginning of BE ron Bie the movie and then press the Beginning button Use 3D menu to select Side by Side or Top Bottom option if the 3D content currently playing does not properly appear in 3D mode Search Time Bar 3D NOTES gt Use 3D menu only for 3D contents of Side by Side or Top Bottom format If applied to 2D contents it may not be displayed properly 134 English You can use the Search Scene function during playback to view or start a movie from the scene of your choice NOTES gt If the index information in the file is damaged or the file does not support indexing you will not be able to use the Search Scene function gt If you are using
104. tes and other countries Oracle and Java are registered trademarks __ of Oracle and or its affiliates Other names lt may be trademarks of their respective Java owners POWERED This ttem incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited Blu ray Disc Blu ray and the logos are trademarks of Blu ray Disc Association This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their soundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consumer Information Centre P O Box 86851 San Diego CA 92138 USA This product incorporates proprietary technology under licence from Verance Corporation and is protected by U S Patent 7 369 677 and other U S and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology Cinavia is a trademark of Verance Corporation Copyright 2004 2010 Verance Corporation All rights reserved by
105. to the duct hole of the subwoofer speaker gt Do not hang the subwoofer on the wall using the duct hole gt The wireless receiving antenna is built into the wireless receiver module Keep it away from water and moisture gt For optimal listening performance make sure that the area around the wireless receiver module location is clear of any obstructions gt If you hear no sound from the wireless surround speakers switch the mode to Dolby Pro Logic Il gt In 2 CH mode you will hear no sound from the wireless surround speakers NOTES gt If you place a speaker near your TV set the screen colour may be distorted because of the magnetic field gt Place the wireless receiver module at the rear of the listening position If the wireless receiver module is too close to the product sound from the speakers may be disrupted because of interference gt If you use a device such as a microwave oven wireless LAN Card Bluetooth equipment or any other device that uses the 2 4 5 8GHz frequencies near the product sound from the speakers may be disrupted because of interference gt The maximum transmission distance from the product to the wireless receiver module is about 10m but may vary depending on your operating environment If a steel concrete wall or metallic wall is between the product and the wireless receiver module the system may not operate at all because the radio wave cannot penetrate metal gt Ifthe product doesn t
106. to the right Press the PTY SEARCH button again while the PTY code selected in the previous step is still on the display e The centre unit searches 29 preset FM stations stops when it finds the one you have selected and tunes in that station Using the Special Effects Remote Control Buttons SOUND EFFECT Function SOUND EFFECT Lets you select a mode that optimizes the sound 1 Press the SOUND EFFECT button 2 Press the AY button to select the desired mode DSP Dolby Pro Logic II or SFE Mode 3 Press the lt gt buttons to select the desired sound effect a DSP MP3 Enhancer gt Power Bass gt Football gt Off MP3 Enhancer Helps enhance your sound experience ex mp3 music You can upscale your MP3 level sound 24 kHz 8bit to CD level sound 44 1 kHz 16bit Power Bass Increases the volume level of bass tones and provides thudding sound effects Football Creates a more dynamic realistic stadium like sound For listening to football soccer and other sporting events Off Select for normal listening Q Dolby Pro Logic Il Movie gt Music gt Game gt Matrix gt Pro Logic gt Off Movie Adds realism to a movie soundtrack Music When listening to music you can experience sound effects as if you are listening to the actual performance Game Enhances the excitement of a game s sound Matrix Select to hear multi channel surround sound Pro Logic Selec
107. to the screen size of your TV See page 54 BD Wise is Samsung s latest inter connectivity feature When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI and BD Wise is on in both the product and TV the product outputs video at the video resolution and frame rate of the Blu ray DVD Disc Lets you set the output resolution of the HDMI video signal to BD Wise Auto 1080p 1080i 720p 576p 480p The number indicates the number of lines of video per frame The i and p indicate interlaced and progressive scan respectively The more lines the higher quality Setting the Movie Frame 24Fs feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV e You can enjoy the Movie Frame 24Fs feature only on a TV supporting this frame rate e Movie Frame is only available when the product is in the HDMI 1080p output resolution modes English 21 sBuNesS po Settings DVD 24fps Conversion Smart Hub Screen Size HDMI Colour Format HDMI Deep Colour Progressive Mode Speaker Settings Auto Sound Calibration Equaliser Smart Volume 22 English Converts DVD playback to 24 frames per second and outputs it via HDMI This option is only available when Movie Frame 24Fs is set to on Speaker Selection Lets you select the optimal size for the Smart Hub Screen
108. to use the Equaliser English 35 Media Play Using the View amp Options Menus On the screen that lists the video files use the A Y 4 gt buttons to select View or Options in the upper right and then press the amp J button Videos Displays all the folders with videos by date If you select a folder and then press button displays all the videos in the folder by date new Displays all the video files on Title the media or storage device by title Folder Displays all the folders on the media or storage device Play Selected lets you create a playlist by selecting Play Selected NOTES specific files to play It works essentially the same way for all media See Creating a Playlist from a CD on page 38 gt Depending on the disc or storage device the Options View menus may differ All options may not be displayed gt The View and Options menus are usually available when you are viewing video files on a USB flash drive a PC a disc you recorded yourself or a mobile device They are usually not available if you are viewing a commercial Blu ray DVD or CD disc Options Select Send to upload selected files to apps Picasa Facebook etc or devices To use Send you need to establish an account with the on line site and then log in using the Log In function 36 English Controlling Music Playback You can control the playback of music content located on a DVD CD USB mobile device or PC De
109. udio Sync delay so that the audio syncs with Lets you configure App notification ae the video You can set the delay settings and view basic info about between 0 and 300 milliseconds your Apps on Agee Senge V Push Notification Settings z N Receive notifications from selected a etwork l services o Network Lets you check the current network v Properties See basic info about Status and Internet status Apps Configure the network connection You can lock access to Video on NetNOkK so you can enjoy various features Demand VOD content based on its such as Internet services or AllShare rating SALIGE Wi Fi functionality and perform VOD Rating NOTES software upgrades Lork gt The default security PIN is OOOO Lets you connect a Wi Fi Direct Depending on your country device to the product using a peer this menu function may not be to pear network without the need supported for a wireless router Note that if the product is connected Terms amp to a wireless network it may be Conditions Lets you oe me me oe oie ee disconnected when you use Wi Fi Privacy Policy and Conditions and Privacy Policy i Fi Direct Direct Resets all Smart Hub settings to NOTES Reset Smart Heir default settings gt Text files such as files with a TXT Hub NOTES or DOC extension will not display when you are using the Wi Fi gt The default security PIN is OOOO Direct function Lets you control which devices on cen AllShare your
110. uetooth device s manual 3 Select the Stereo headset menu on the Bluetooth device e You will see a list of devices 4 Select HTS Fxxxxx from the searched list e When the Home Cinema is connected to the Bluetooth device the device name of the connected Bluetooth device followed by the name of home cinema will appear on the front display of home cinema 5 Play music on the connected device e You can listen to the music playing on the connected Bluetooth device over the Home Cinema system NOTES gt The Home Cinema only supports Middle Quality SBC data up to 237kbps 48kHz and does not support High Quality SBC data 828kbps 44 1kHz gt The AVRCP feature is supported It s functionality will differ depending on the specifications of the connected device gt Connect only to a Bluetooth device that supports the A2DP Profile gt Only one Bluetooth device can be paired at a time gt The search or connection functions may not work properly in the following cases lf there a strong electric field near or around the home cinema lf several Bluetooth devices are simultaneously paired with product lf the Bluetooth device is turned off not in place or malfunctions Note that such devices as microwave ovens wireless LAN adapters fluorescent lights and gas stoves use the same frequency range as the Bluetooth device and can cause electric interference To disconnect the Bluetooth device from
111. ww samsung com FRANCE 01 48 63 00 00 www samsung com fr SPAIN 902172678 www samsung com 0180 6 SAMSUNG bzw SWEDEN 0771 726 7864 SAMSUNG www samsung com 0180 6 7267864 www samsung com ch GERMANY 0 20 Anruf aus dem dt Festnetz aus Samsung com swiTzeRLanp 0848 SAMSUNG 7267804 CHE 0 08 German dem Mobilfunk max 0 60 Anruf min www samsung com ch_fr CYPRUS 8009 4000 only from landline www samsung com gr French 80111 SAMSUNG 80111 726 7864 only U K 0330 SAMSUNG 7267864 www samsung com from land line EIRE 0818 717100 www samsung com GREECE 30 210 6897601 from mobile and lang W SASUnG comigr HUANA 8 800 77777 a samsung com ne LANA 8000 7267 wir samsung comiv HUNGARY 06 80 SAMSUNG 726 7864 www samsung com hu ESTONIA 800 7267 wwwsamsung com ee ITALIA 800 SAMSUNG 726 7864 www samsung com Correct disposal of batteries in this product Applicable in countries with separate collection systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separat
112. you selected are deleted NOTES gt You cannot immediately delete a locked app or folder If you select a locked app or folder to delete when you perform Step 7 the Lock Service pop up appears Enter the Security PIN into the pop up and then press the J button The lock will be released and the app or folder will be deleted English 49 S8DINIBS YIOMJON 90 Network Services Update Apps When the application require to update to the latest version select Apps and then select More Apps On the More Apps screen select Apps to update and then select application from the list The application starts updating to the latest version However Apps to update appears on the screen only when the update is required Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or smart device on the TV you have connected to the home cinema system 1 With the Blu ray s Home screen displayed press the BLUE D button on the remote The Screen Mirroring pop up appears 2 Launch AllShare Cast on your device 3 On your device find the name of the home cinema system in the list of available devices and then select it 4 The TV displays a connecting message for example Connecting to Android_92gpb and then displays the connected message 5 In a few moments the screen of your device appears on the TV screen NOTES gt When you are using the Screen Mirroring function vid

Samsung HT-F9750W User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents