OPERATING INSTRUCTIONS
Contents
1. OPERATING INSTRUCTIONS Model PWS WW Cn N NN PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE Thank you for purchasing an Earlex Steam Wallpaper Stripper In order to obtain the best results please read the instructions before commencing any work Please also make a special note of the safety rules EARLEX LTD WILL ACCEPT NO RESPONSIBILITY FOR THE USE OF THIS PRODUCT IF USED FOR ANY OTHER PURPOSES THAN THOSE DETAILED HEREIN RETAIN FOR FUTURE REFERENCE Safety Rules e Keep away from children and animals e Do not pull by the mains lead or the steam hose e Be careful of overhead dripping when using on overhead areas tilt the steam plate away from the face and body and regularly empty the steamplate of any collected condensation e Do not leave unattended e Do not point the steam plate at anyone e Do not allow water or steam to enter light switches or sockets e Always use and store upright e Always visually check that the hose and steam plate inlet are not blocked before attempting to use e Do not strain kink or trap the hose under heavy objects e Use only 4lb pressure cap as supplied It is also a safety valve NEVER BLOCK OFF THIS OUTLET e NEVER remove the filler cap when unit is boiling switch off and wait for 5 minutes Main Features This is a professional fast action steam wallpaper stripper It has many added features e Each tank is individually pressure tested e Storage for the2. is very hot wear a glove and keep face clear Refill to the level indicator as before and follow above instructions STEAM IS DANGEROUS Other Uses The stripper can also be used to e Sterilise soil e Remove Artex e Kill garden weeds e Lift stuck down vinyl tiles TROUBLE SHOOTING Unit Fails to Boil Unit keeps cutting out e The thermal cut out has operated Switch e Check that water is above minimum off allow to cool refill with water then level switch on again e Check that the extension lead is rated at e Check the fuse in the plug 13 amps minimum and fully unwound e f using an extension lead check that the e Check that no additives have been used thermal re set button on the extension lead has not tripped out Steam escaping from Pressure Cap e Check for blockages in hose or steam Check that the extension lead is rated at a plate minimum of 13 amps e Clean seating around cap area If the unit still will not operate return the unit to the dealer or authorised agent to check the thermal fuse link and element ONLY QUALIFIED ELECTRICIANS SHOULD UNDERTAKE THIS WORK Descaling We recommend that the tank is cleaned descaling products used as per the every three months using proprietary manufacturers instructions IF YOU REQUIRE ANY FURTHER ASSISTANCE PLEASE CALL OUR HELPLINE ON 01483 454666 Spare Parts The full range of spare parts is available from Earlex Despatch is available same day by first class po
3. our products leave the factory in good working order Earlex cannot under any circumstances accept liability for problems or damage caused by their subsequent use It is the responsibility of the user to ensure that surfaces to be treated cleaned or stripped are suitable for steam This guarantee does not affect your statutory rights In the event of a fault occuring please contact our helpline before returning the unit to our Service Department at the address below together with a copy of your purchase receipt All repairs will be dealt with speedily If the guarantee card is not returned within 14 days from the date of purchase the guarantee is limited to date of product manufacture Earlex Earlex Ltd Moorfield Road Slyfield Industrial Estate Guildford Surrey GU1 1RU England Tel 44 0 1483 454666 Fax 01483 454548 2005 Earlex Ltd PS2048 01 05
4. 0188 Steam Plate Label Euro not shown 1 Handles PS 0283 Switch and Covel ccceeeeeee 1 PS 2031 Handle for tank cover Black PS 0296 Short Earth Stud seccceeetereereeteees 1 PS 2044 Handle for tank cover Orange c0 0Sd 2200Sd 82L0Sd O G d OE NA o 6L00Sd y O NN La a AN 8z00Sd Z00Sd 9 96Z0Sd D o o A C bas i y LZ00Sd N 9L 0Sd ec00Sd AOE X MO0SZZ 9100Sd AN 6200Sd g000Sa A Oe gS00Sd OS Tes Z30054 9 00Sd 600ZSd V 8000Sd OvLOSd CLOZSd 7 7 7 N a 8EL0Sd Uf S a po 6v00S4 SLEOJE080Sd 500Sd 8 00Sd 8r00Sd oN c0Z0Sd v d L0S J NVYYXO v0ZSd P b MOVIE 0 0ZSd amp JONVYO vr0ZSd 00z0Sd MOVIE LEOZSd enh 6 0ZSd Mains connection The stripper is supplied fitted with a 13 amp plug earth top and fuse If a replacement fuse is required green amp yellow this must be rated at 13 amps If in doubt consult E A an electrician L EA WARNING THIS APPLIANCE MUST BE EARTHED For your total protection it is recommended that a residual current circuit breaker RCCB should be used in conjunction with the stripper Min 15 amp Max 20 amp neutral blue Mains connection 110V UK only The stripper is fitted with a 16 amp industrial plug for insertion into a suitable transformer or If this mains cable becomes damaged it must be generator supplying 110V a c outlet If this replaced with our Part No PS0029 mai
5. Elbow Steam Outlet ooooooccinncccnnncccom 1 PS 0047 Steamplate Assembly not shown 1 PS 0048 Steam Plate 2 conooccccnonnnnnnn ee 1 Elements PS 0049 Adaptor for HOSE cceee conoooncoos 1 PS 0016 Heating Element 2750W x 230V PS 0053 CliClPDeca iaa ed 1 PS 0088 Heating Element 2200W 2400W PS 0055 Taper Nuts cessecceeeseeeeeeeeeeeeeeeeeees 4 230V 240V PS 0077 Insulating Sleeve eee eeeeeeeeeees 3 PS 0093 Heating Element 2900W x 230V PS 0112 Mains Switch USA eects 1 PS 0094 Heating Element 1500W x 120V PS 0117 O Ring Tank Seal c cceeereeeeeees 1 PS 0156 Heating Element 1760W x 110V PS 0118 Gasket Tank Window cooccccooccccooo 1 PS 0123 Thermostat ccccccceesseeeeeeeeeeeeteeeeees 1 Tank Covers gt al ee E E PS 2030 Tank Cover Black PS 0128 Protective Cap M6 3 Po eoio Tank Gover Orangs PS 0134 Stainless Steam Pipe 1 PS 0136 Glass WindoW s coomoccnnnncnninonnnnnos 1 Cable Assemblies PS 0137 Glass Retaining Plate 1 PS 0029 Cable Assy UK PS 0138 Level Indicator Ball 1 PS 0075 Cable Assy Europe PS 0139 Screw for Retaining Plate 6 PS 0109 Cable Assy USA PS 0140 Screw for Tank JOINt csceeeeeeee 3 PS 0155 Cable Assy 110V PS 0176 Instruction Book USA not shown 1 PS 0213 Cable Assy Australia PS 0184 Steamplate label USA not shown 1 PS
6. hose and the mains lead e Neon mains On Off switch e Cooler running steam hose Caution Check the state of your plaster before starting work Steam can loosen weak porous or poorly bonded plaster which also loosens readily if cracked holed or if steam plate is held in one position for too long after the paper is soaked e Always disconnect power supply when filling the machine or when not in use e Do not use any caustic cleaners on the tank e Do not allow to boil dry e Do not overfill the reservoir DO NOT USE ADDITIVES e Never detach the hose whilst the unit is switched on e The tank becomes hot in use Do not touch Only move with the carrying frame e Steam is produced at 100 C Wear protective clothing and gloves when operating this stripper e DO NOT USE THIS STRIPPER FOR ANY OTHER PURPOSES THAN DETAILED IN THESE INSTRUCTIONS e Under no cirumstances should you attempt to repair a unit unless qualified and authorised to do so e Always use genuine Earlex replacement parts Weak plaster can normally be detected by tapping a few areas of the wall A hollow sound indicates that you should proceed only with extreme care stopping immediately if you hear a cracking sound or plaster starts to break loose The steam stripper is safe for drywall plaster board surfaces but whatever the material it is always wise to check a small area before starting work properly Protect your home The heat genera
7. ndicator and should not be allowed to fall below minimum Switch the unit off when this level has been reached If you require further use of the steamer ensure unit is switched off and has stopped boiling Wait for 5 minutes Slowly unscrew the cap any remaining trapped steam will be released from beneath cap Caution steam is very hot wear a glove and keep face clear Refill to the level indicator as before and follow above instructions YOU MUST NEVER ALLOW THE UNIT TO BOIL DRY There is a safety thermal cut out device fitted to the unit If the unit is allowed to boil dry this will operate and prevent further use Switch the unit off and allow it to cool for at least 5 minutes refill with water and then switch on again the thermal cut out should automatically re set If this has not re set allow a further cooling period When you have finished using the unit allow any remaining water to cool and then empty the unit We recommend flushing the tank out with clean water before storing NEVER LEAVE WATER IN THE UNIT WHILST BEING STORED Storage The hose steam plate and mains cable can all be stored in the pocket on the side of the unit Radiator Cap To fit screw onto the filler neck hand tight Do not overtighten To remove ensure unit is switched off and has stopped boiling Wait for 5 minutes Slowly unscrew the cap any remaining trapped steam will be released from the anti discharge valve Caution steam
8. ns cable becomes damaged it should be As the colours of the wires in the mains lead of eplaced with our Pt No PS0155 this appliance may not correspond with the coloured markings identifying the terminals in Extension Leads your plug proceed as follows If you are using an extension lead it must be rated at a minimum of 13 amps and e The wire which is coloured green and yellow fully unwound Do not operate with a lead must be connected to the terminal inthe plug rated at less than 13 amps as this will which is marked with the letter E or by the Cause premature failure of the element earth symbol or coloured green or green and Which is not covered by guarantee yellow e The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black e The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red EC Declaration of Conformity We declare that the units PWS conform to 73 23 EEC BSEN60335 1 BSEN60335 2 15 8 89 336 EEC EN55014 1 EN55014 2 EN61000 3 2 EN61000 3 3 le ER Tim Hopper Technical Director GUARANTEE This product is guaranteed for a period of 2 years for ordinary use and 1 year for hire purposes or where the unit is lent to other users The tank is guaranteed against corrosion for 3 years The guarantee is against faulty materials or workmanship Whilst every possible care is taken by Earlex to ensure that
9. onnect the mains lead from the unit to the socket and switch on The mains switch on the unit has a neon and will light when the unit is on It will take between 10 and 20 minutes for the unit to start producing steam depending on the temperature of the water used DO NOT LEAVE UNATTENDED Once steam is being produced at the steam plate you are ready to commence operation Prior to the steam being produced a small amount of bubbling will occur at the steam plate WARNING Beware of hot water discharge prior to steam emission When the steam has been produced lift the steam plate above the level of the tank outlet to allow condensed steam to run back down the hose and into the tank If you are right handed hold the steam plate in your left hand and place flat against the wall where you wish to commence removing Leave the plate against the wall for approximately 10 seconds If you are left handed you may find it easier to operate with the other hand Move the steam plate to the section immediately next to where you have just been working and use a wallpaper scraper to remove the section that has just been steamed By working in this way you should be able to remove paper continually You may have to leave the plate against the wall for longer periods with some papers or re steam if not completely removed The unit will operate for approximately 1hour before requiring refilling The water level is shown through the glass level i
10. st to Companies with credit facilities or for payment by credit card PART NO DESCRIPTION QTY PS 0303 0315 Pressure Cap Assembly with Chain 1 PS 0004 Tube Connector external 4 PS 03802 Switch UK on anae 1 PS 0008 A Steam Tank Anodised cccccceceenees 1 PS 2005 Nylon Capp Ring coocccncccinncconncnonncanccinnoos 4 PS 0019 Thermal Fuse consonancia 1 PS 2009 Washer Cover Fixing ceccoccconiconocnonnncnonoss 4 PS 0020 Sealing Ring for Element 1 PS 2010 Label Instruction USA not shown 1 PS 0021 Std ini 2 PS 2012 Tube tank moulding punched 1 PS 0022 Hexagon Nut coccccccocncocin n ereere 6 PS 2018 Label instruction Euro not shown 1 PS 0023 Shakeproof Washet 0 cocmoocccononnnos 4 2039 Handle Screw P e coriessseees 2 PS 0027 Cable Assembly Switch to Cut out 1 2042 Steam Plate Assembly With swivel joint y ch to Cut ou MO SHOWN Sauce does 1 PS 0028 Cable Assembly Switch to Element 1 PS 0284 Cap Warning Label Euro not shown 1 PS 0032 Element Cover isrener tetas 1 PS 0287 Instruction Booklet Euro PS 0036 C sk Screw Tank to Frame 1 French Dutch GerMaN oociociciociinocnoccoss 1 PS 0037 Lever Type Cap cocccnononcnnonnnnninnnnos 1 PS 0306 Cap Fitting Euro Models not shown 1 PS 0038 Steam Hose Assembly ceee 1 PS 3037 Foot Moulding cooconoccnnconoccnonnccncccnncoss 4 PS 0042
11. ted by the boiler unit can mark carpets soft furnishings table tops cabinets etc Dust sheets or newspapers are not suitable heat protectors for delicate surfaces Preparation To achieve fastest paper removal always gently score the areas to be stripped With heavily embossed vinyl coated or painted papers this is essential Either use a proprietary perforator tool or alternatively score the paper with the edge of a wall scraper in a criss cross pattern with 150mm 6 inch spacing As with all decorating work be sure to protect carpets and furniture with covers Operation STEAM IS HOT The unit is designed for safe fast removal of wallpaper but you myst be aware that steam is produced at 100 C so be careful wear protective clothing and protect your hands with heat resistant gloves or mitts Place the unit on a flat surface near to the area to be stripped Remove the steam plate FULLY UNCOIL the hose and mains lead Connect the thread on the steam plate to the end of the hose This only needs to be hand tight DO NOT OVERTIGHTEN If the steam plate is fitted with a metal swivel joint tighten hose nut to thread using two spanners The plate can remain permanently attached to the hose thererafter To fill the unit remove the filler cap and fill to the maximum water level as shown on the glass panel at the end of the tank This must be clean water preferably hot DO NOT USE ADDITIVES DO NOT OVERFILL C
Download Pdf Manuals
Related Search