Operating instructions IO-Link interface E30396 706334 / 00 01
Contents
1. the parameter setting and set up software for IO Link sensors LINERECORDER SENSOR order no ZGS210 the interface determines the correct communication mode and starts the exchange of data If the sensor does not have a suitable communication protocol no data is exchanged But the sensor continues to be supplied with operating voltage This enables operation for testing or demonstration purposes2. CE 01 2013 706334 00 ifm electronic Operating instructions IO Link interface E30396 1 Items supplied 10 Link interface e Operating instructions 2 System requirements 1 Current drivers can be found on the manufacturer s website PC or Laptop with Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Microsoft Windows 7 e One free USB 2 0 port e Accessory software FDT framework software ifm Container order no E30110 to be downloaded from the manufacturer s website e Parameter setting and set up software for IO Link sensors LINERECORDER SENSOR order no ZGS210 3 Functions and features The interface connects sensors with communication capability to a PC and provides the following options e Reading of the current parameter setting e Parameter setting of the sensor e Reading of the current measured value The interface supports IO Link and the ifm specific EPS protocol Requirements for communication with sensors e Option 1 Use of the ifm program library with available DTM objects which must be installed on the PC is part of the ifm Container e Option 2 Use of the parameter setting and set up software for IO Link sensors LINERECORDER SENSOR order no ZGS210 including the respective IO Link Device Description IODD 1 The interface with connected sensor requires the complete current provided by a USB port Therefore only operate it dire
3. ctly on a USB port or on an active USB hub If the interface is connected via a passive USB extension or a passive USB hub it is deactivated 1 The sensor must not be connected to an additional parallel power supply This can destroy the USB port Due to properties of the Windows operating systems correct functioning of UK several interfaces connected in parallel cannot be guaranteed 4 Installation The PC addresses the interface internally via a virtual COM port to ensure compatibility with older software You must have administrator rights for installation Installation gt Insert the CD ROM into the drive order no E30110 or open and execute the installation file downloaded from the manufacturer s website as an alternative connect a USB memory stick order no ZGS210 gt Connect the interface to a free USB port gt The Microsoft Windows hardware wizard is started gt Follow the instructions in the program Make sure to select the following options Search for locally available drivers Selection of the driver from the inserted CD ROM or the USB memory stick Automatic installation of the software 5 Operation gt Connect the interface to the sensor and to a USB 2 0 port of the PC gt After the initialisation time of approx 5 seconds the interface supplies the sensor with operating voltage gt lf the sensor is addressed via the FDT framework software ifm Container order no E30110 or
Download Pdf Manuals
Related Search