INSTALLATION MANUAL:
Contents
1. Horse INSTALLATION MANUAL BSA TRIUMPH NORTON HPI Kuilenstraat 97 3960 Bree Belgium Ignition TEL 0032 089 46 74 39 FAX 0032 089 47 33 28 GSM 0032 0495 53 90 21 Email hpi hpi be Website www hpi be 1 Included in this set are 3 screws that have a metric M8 thread To be able to fix the ground plate on the engine with these screws you will need to re tap the 3 holes in the engine for a metric M8 because they originally have english screw thread 2 Adjust the height of the groundplate using the bushes of 14mm for BSA and the bushes of 28mm for Triumph 3 Place the piston at 10 to 13 mm before its most upper position OT for trial BSA B40 B44 and 14 to 15 mm before its most upper position OT for cross BSA B50 see image 1 4 __ Fit the rotor and the stator so that both markings are aligned see image 2 Attention also mind the position of the HPI Logo on the rotor Don t tighten the screws yet 5 Make sure that the piston is in position and the markings are aligned If necessary make adjustments by rotating the base plate of the stator 6 Tighten all the screws 7 Connections gt the 3 pole connector of the stator to the 3 pole connector of the CDI gt the orange cable from the CDI to the HT coil the HT coil must be connected to the frame for mass gt the black white cable to the on off switch LOGO OT Image 1 Image 2
Download Pdf Manuals
Related Search