User's Guide LRD6110 and LRD6110C Label Sensors Lion Precision
Contents
1. C 50mA max NPN Load Black Ground Connected to sensor body Green NPN Output 150mA max PNP Load Blue PNP Output 150mA max Brown Output Polarity V Dark light dark Switching NC switching Ground Light Switching NO Warning Brown wire must be connected to V or Ground for reliable operation LRD6110C with M12 Connector 11 to 28VDC NPN Output 150mA max PNP Output 150mA max Ground Polarity Invert Wire Connection Notes 1 Brown igaeane Color ro 1 Brown Vin 11 28VDC 50mA max celal eee eid 2 White NPN Output 150mA max 150mA max 3 Blue Ground Connected to patios sensor body PNP Load 4 Black PNP Output 150mA max Ground 5 Gray Output Polarity V Dark light dark Switching NC eal nyer switching Ground Light Switching NO x f Warning Gray wire pin 5 must be connected to e V or Ground for reliable operation amp 5 g Setup Procedure Web must remain in contact with the mounting plate Label must pass under the SENSOR indicator Small labels should be centered under the SENSOR indicator Feels When properly setup the lights will move between wEB and LABEL The lights in the X region should only light briefly during the transition between Wes and LABEL regions Sensor Setup 1 Turn Span at least four turns counter clockwise then two turns clockwise this i2. Output and Mechanical Detail Output Polarity V Dark Switching lt Outputs Output Polarity GND Light Switching __ __ lt Outputs 5 1mm 0 60 30 5mm 0 60 15 2mm gt le 15 2mm N z SE Gap 0 03 3 E on 0 76mm TN Specifications Voltage 11 28 VDC reverse polarity protected Power supply Current 50mA on or off 20us max Response time ae Switching Frequency 10kHz max faded Output Current sinking or sourcing 150mA max overload protected utpu j Switching output PNP or NPN dark or light switching Temperature Operating Range 40 F to 140 F 4 C to 60 C Supply Inverse Polarity Protection Protections Switching output Short Circuit and Overload Protection User s Guide for the LRD6110 and LRD6110C Label Sensors from Lion Precision Lion Precision 563 Shoreview Park Road St Paul MN 55126 651 484 6544 www lionprecision com Document Number M015 3380 016 Connecting to the Sensor Warnings Sensor body is connected to Ground Unused wires must be insulated from contact with other objects All power must be off when installing the sensor Brown wire Output Polarity must be connected to V or Ground for reliable operation LRD6110 with Integral Cable Wire Connection Notes Color Red Vin 11 28VD
3. s the mid point of the adjustment range Place web liner only in sensor Adjust Shift until LED 2 is on then adjust Shift just to the point where LED 1 is on 4 Slowly move a label gap through the sensor and verify that the indicator lights LED 1 as the gap passes through the sensor If it does not adjust Shift as necessary until it does 5 Setup complete If the setup does not give reliable results usually for labels less than 1 turn Span four turns clockwise maximum gain and repeat steps 2 5 It is important that the indicator only cross the X region during transition from web to label See the LRD6110 setup video at www labelsensors com Notes 1 The LRD6110 may not work reliably with solid foil labels Some inks usually black have a high carbon content If the label is flood coated 100 coverage with the ink it may behave like a solid foil label 2 For solid foil labels use the UltraLRD V2 Two Year Warranty details at www lionprecision com warranty html
Download Pdf Manuals
Related Search