ALL IN ONE SPYPHONE Introduction and User Guide
Contents
1. refer to example table Boot SIM Change The command 0000777 is related to activating deactivating the Boot SIM change feature To enable or disable the Boot SIM change feature send the command from the PDN to the TP Once a SIM is changed and the PDN is notified the new SIM will be considered as the default SIM TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Location The command 0000888 is related to requesting the location of the TP The TP will respond immediately and return the location information as stated above after receiving this command This feature is always enabled and cannot be disabled TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Restart The command 0000999 is related to refreshing and restarting the software This command has no significant use other than stabilizing the software TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Status The command 0000567 is related to the status report On receiving this command the TP will return the status of the software and whether the software is ON including which features are also activated TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Phone Dead Coming soon Contacts Coming soon Frequent2. ALL IN ONE SPYPHONE Introduction and User Guide Available model phones Nokia 3250 5500 E50 E60 E61 E61i E62 E65 E70 N73 N76 N77 N80 N91 N95 6110 6120 6121 OS9 series Terminology Target Phone TP Phone which the software is installed Pre defined Number PDN Phone number which the target phone will be controlled Target User TU Owner of the target phone Remote Party RP Person with whom the target phone is connected with at any time Introduction Spy phone is the trading name of us We are world leaders in Spy software development We manufacture and distribute the most advanced remote monitoring products and software for mobile phones in the world Our new software acts as a hidden security file that intelligently operates in its own environment without tampering or manipulating the normal operation of the handset whatsoever Years of development and a brand new GSM engine built from the ground upwards means our software is completely stable and flawless in operation and gives absolutely no indication of any installation logs pre defined number logging or any indication of connected calling An intelligent Remote Control Management Tool is implemented which allows the PDN to send invisible text commands to the TP These invisible commands control the software operation without any indication to the user of the handset including the activation deactivation of the software features and also change
3. CALL THROUGH In order to use the Call Through feature please ensure that Call Conferencing is activated on the network SIM card used inside the TP To activate Call Conferencing please call your network provider and ask them to activate this feature Call Conferencing is currently only available on contract SIM cards Please also ensure that the Call Waiting feature is activated on the TP and this is done by simply going to MENU gt SETTINGS gt CALL gt CALL WAITING OPTIONS and then activating Call Waiting If this feature is not enabled your call will go to voicemail answer phone PRECAUTIONS FOR OS 9 There are three ways by which the spy calll will be disconnected 1 When the TP presses any key 2 When there is another call coming through to the TP 3 When the PDN itself disconnects the call If the call is disconnected according to point 1 the PDN may call again immediately to listen in VERY IMPORTANT If the call is disconnected according to point 3 then the PDN must wait for 1 minute before making another spy call or sending any SMS command After 1 minute the backlight will automatically be turned ON over the TP and stability will be resumed VERY IMPORTANT Never leave the TP SIM card without topped up credit Failure to keep the TP SIM card topped up will result in the any forwarded texts being stored until sufficient credit is available Obviously this does not apply to contract SIM cards BLUETOOTH TRANSFE
4. R We recommend using Bluetooth in order to transfer the file from your desktop to your TP as this is the quickest and easiest method The description below is based on our Bluetooth device however this may differ slightly to your Bluetooth device 1 Turn ON Bluetooth on the TP This setting can be found in MENU gt CONNECTIONS gt BLUETOOTH 2 Turn ON Bluetooth on your PC If your PC is already equipped with Bluetooth you need do nothing as it will be ready to use If you do not have Bluetooth we recommend purchasing a Bluetooth dongle for approx 8 your local PC store 3 Hover your mouse button over the sis file on your desktop and right click A drop down list will appear with Send To Click SEND TO gt BLUETOOTH gt OTHER and a table will appear asking you to select a device If your phone model does not appear in the list simply click REFRESH and your PC will start searching for available devices 4 Once Bluetooth has found your phone model it will be added to the list of devices in your Bluetooth table from which you can simply highlight to transfer 5 For security and to ensure the file is sent to the correct handset if you have different devices that are also Bluetooth enabled your PC will ask you for a password Key in any password like 1234 into the Bluetooth on your PC 6 Next your handset will ask for the same password in order to accept a connection from the PC and transfer the file Also key 1234 into your hands
5. countries Free cell ID tracking websites include www cellspotting com or www celltrack sovdevelopers com Signal strength 86 if the phone is closer to a base station then signal strength will be greater Location street name this is the street address of the base station provided by the network through CB message Please Note When you request the location automatically the software will detect if the network supports this feature and therefore if no information is given next to the location data the network SIM does not support Cell ID The software can be restarted at any time by sending the reboot command from the PDN If this feature is applicable to your package by sending the Reboot command will help stabilize the software should it encounter any problems By sending the Status command will return a text message to your PDN to assure you that the software is working and which features you have activated Understanding Invisible Commands Invisible commands are case sensitive secret code s that you specify during the ordering process which allow you to activate deactivate any individual feature or ALL features together and also set up and change the pre defined number When you send a command from the PDN to the TP this will NOT be acknowledged by the TP and will silently perform the task you requested it to do Please Note You will also receive a confirmation text message of your request after sending any command to
6. credit on the TP the software will try to send a copy as usual but will fail because there is no credit to forward the original text message In this scenario the copy text will be logged in the drafts folder of the TP waiting to be sent when credit is available For this reason we strongly recommend that the TP is ALWAYS topped up with credit What if the phone is switched OFF when I send a command When the phone is switched back ON your command will then get through and perform your request When try to install the file my handset say s there is a security error or it will not accept unsigned files Please go to MENU gt TOOLS gt APP MGR gt APP DOWNLOADS gt OPTIONS gt SETTINGS and ensure SOFTWARE INSTALLATION is ON and ONLINE CERTIF CHECK is OFF Does the software work on all networks Our software is compatible with networks in any country in any language however it is impossible for us to test all networks worldwide We therefore cannot give any guarantees and advise you to be prepared to use a different network or SIM card inside the target phone in such circumstances Does the software work forever Operating systems 7 and 8 allow for lifetime operation without any updates Operating system 9 updates are required once per year Please do not purchase operating system 9 software if you will not have access to the target phone for a few minutes once per year Important Additional Information Please Do Not Ignore NOTES FOR
7. e to the mobile phone s normal operation 1 Save the file to your desktop and then transfer the file directly to the TP There are a few different ways to transfer the software file to the TP and this can be done either by Infra red Bluetooth or the cable supplied with the handset Please Note See BLUETOOTH TRANSFER located towards the end of this document 2 Once you have transferred the files simply follow the on screen prompts to install the software Please Note Read our disclaimer located towards the end of this document before you install our software a Run and install main sis b Run and install update sis c If you see the message saying Update complete then skip the d step below and go straight to f d If no message was displayed in the phone s main menu find the icon called upd9 run and install Now you can delete this icon if you want f Reboot the phone g Done The software is installed 3 Next the first thing to do after installing the software is to input a PDN The PDN will be your mobile number or any mobile number you wish to control the TP from Let s assume that your mobile phone number in the UK is 07745123456 By using the chart in this example the correct way to set the PDN is as follows 0000111 447745123456 You will notice the soace between the command and the country code 44 and also the first zero 0 is omitted from the mobile number 4 You will now receive a te
8. et 7 Your handset may ask if you wish to accept the file transfer of which you do YES 8 The transfer is now automatic You will see the file transfer invisibly via Bluetooth to the handset and arrive as a text message 9 Now refer back to INSTALLATION AND SCOPE OF COMMANDS to install and set up the software Disclaimer amp Legality Status We strongly recommend that you read this document again You are responsible for deciding on the suitability of the goods offered for any particular purpose and for the consequences arising from your purchase By purchasing or placing an order for any product through OUR website or any of our publications or any material connected directly with us you are acknowledging that you fully understand and have consulted the legality status through a respected governing body You are purchasing on the understanding that you have made all appropriate means to comply yourself and fully understand the applicable laws relating to such equipment used in this country or your own country and the consequences which may be implied by their misuse We will not be held responsible for failure or malfunction of any handset caused by using our software Use at your own risk
9. ly asked Questions amp Answers What is a Pre defined number and is it possible to change the number The pre defined number must be a mobile number where all the information from the target phone is forwarded to Our software allows you to change the pre defined number remotely at any time without any indication to the target phone We recommend using an anonymous PAYG SIM as the pre defined number When in spy call how sensitive is the microphone and how far from the phone can hear The microphone is that used to make a normal conversation located in the mouth piece of the phone Though the microphone is very sensitive there is no way to know how far you can hear the general rule is that you can hear the same as if someone forgot to press the END button on the keypad Can the target phone be used for everyday use as a normal mobile phone Yes absolutely Our software operates in its own environment and does not conflict in any way with the normal workings of the phone You can make and receive calls and texts as normal it will ring normally and perform according to the original manufacturer specifications There is no way to tell by holding or using the spyphone that it is packed with extra superb features What happens if somebody else calls the target phone whilst am listening in You will automatically be disconnected whenever the target phone makes or receives another call How long can I monitor the target phone This is onl
10. n using the Spy phone feature this is effectively a two way connected call IMPORTANT Please also read PRECAUTIONS FOR OS9 located towards the end of this document If an incoming call is made to the TP whilst in soy mode then you will be instantly disconnected allowing the other caller to dial in as normal Please Note See PRECAUTIONS FOR OS located at the bottom of this document for important details about disconnected calls Whenever the TP sends or receives a text message an exact duplicate copy will be immediately sent to the PDN Whenever the TP is switched on a notification is immediately sent to the PDN Whenever the TP SIM card is changed a notification is immediately sent to the PDN Whenever the TP makes or receives a call a notification is immediately sent to the PDN indicating the direction of call incoming or outgoing displaying the actual number of the RP At this moment the PDN has the option to make a call to the TP and listen to the actual conversation The TP will create a conference and allow the PDN to listen clearly to both sides of the call Please Note Important information about the CALL THROUGH feature is located towards the end of this document The TP will send its location and network details to the PDN on request This will include Network TIM current user network LAC 1432 location area code Cell ID 2141 current base station ID can be visualized on a map in some
11. text messages sent to the PDN For syntax help refer to example table Enable Disable ALL The command 00002272 is related to activating deactivating ALL the features To enable or disable all the features send the command from the PDN to the TP TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Spyphone The command 0000333 is related to activating deactivating the Soyphone feature To enable or disable the soyphone feature send the command from the PDN to the TP For syntax help refer to example table Text Forward The command 0000444 is related to activating deactivating the Text Forwarding feature To enable or disable the Text Forward feature send the command from the PDN to the TP TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Text Alert The command 0000555 is related to activating deactivating the Text Alert feature To enable or disable the Text Alert feature send the command from the PDN to the TP TP will be charged by the network the cost of any text messages sent to the PDN For syntax help refer to example table Call Through The command 0000666 is related to activating deactivating the Call Through feature To enable or disable the Call Through feature send the command from the PDN to the TP TP will be charged by the network the cost of any text messages sent to the PDN For syntax help
12. the TP Each command will be different for each feature A command is exactly 7 digits long There are a total of ten commands for the ALL in ONE package Feature Command Pre defined Number 0000111 Activate Deactivate ALL features 0000222 Direct Spyphone 0000333 Direct Text Forward 0000444 Direct Text Alert 0000555 Direct Call Through 0000666 Direct Boot SIM 0000777 Direct Location Info 0000888 Request Restart 0000999 Request Status 0000000 Request Direct commands commands which activate and deactivate the feature s must be followed by the binary number 1 or 0 after the command Example 0000222 1 will activate ALL features and 0000222 0 will deactivate ALL features Please Note A soace must be present between the command and the activation deactivation command and the binary number Request commands commands you request information NO binary number is required Direct Command Example 0000777 0 will deactivate the notifications you receive whenever the TP is switched ON and whenever the SIM card is changed in the TP Request Command Example 0000888 will return the location info of the TP Installation amp Scope of Invisible Commands Once we have generated your software files this will be emailed to you as an attachment There is no need to try and open the file it is ready to transfer and install immediately The file is harmless and non conflictiv
13. the pre defined number at any time Once the software is initially installed on the TP full control is governed by the remote control commands sent from your mobile phone silently and without indication NEW Receive confirmation texts after sending each command Never wonder if your command was actually received by the Target Phone You ll know for sure Features Spy Phone Listen in to surrounding sounds and conversations Text Forward Receive duplicate copies of all incoming outgoing text messages Text Alert Receive notifications when TP connects to an incoming outgoing call Call Through Listen to both sides of TP and RP conversations Boot SIM Receive notifications when TP changes SIM or turns phone ON Location Info Receive location info of TP to nearest phone mast Reboot Will refresh software and restart to eliminate problems Status Report Receive notifications of the software operating status Phone Dead Coming soon Contacts Coming soon What the Software Can Do Whenever the PDN dials the TP when the TU is not on a connected call the TP will automatically connect without any indication The software will immediately recognize the PDN and immobilize the ringing backlight and vibration functions whilst keeping the screen display perfectly normal on an incoming call from the PDN This allows the PDN to listen into the surrounding sounds and conversations without any indication Please Note Whe
14. xt message notification which says INFO PDN defined as 447745123456 If you do not receive this message then the TP has not received the PDN command which may be due to the busy network Please be patient and wait 5 Next activate ALL the features By using the chart in this example the correct way to activate alll features is as follows 0000222 1 6 You will now receive a text message notification which says INFO All features activated If you do not receive this message then the TP has not received the Activate Deactivate command which may be due to the busy network Please be patient and wait Please Note You may change the pre defined number at any time FROM ANY MOBILE PHONE by sending the pre defined command and following step 3 above in Installation And Scope Of Invisible Commanas For example let s assume you now wish to change the pre defined number to 07878654321 Simply send the pre defined command 0000111 447878654321 You will now receive a text notification which displays INFO PDN defined as 447878654321 This is now your new PDN Commands and Their Meanings Pre defined Number The command 0000111 is related to changing the PDN Send the PDN command to the TP from ANY phone and that will then become the new PDN At this point the software will only recognise the new PDN on further requests To change the PDN at any time send the PDN command from ANY mobile phone TP will be charged by the network the cost of any
15. y limited by the phone s battery life or credit on your phone Whilst monitoring it is considered Talk Time so please be aware the call is effectively connected We recommend using the Mute option on the pre defined phone It is also advisable to deactivate Call Summary on the phone menv gt tools gt settings gt call gt summary after call OFF Can install the software on other phones No The software file is based on the unique IMEI number of your handset therefore it will not work on any other handset Can I turn ON and OFF the features without touching the phone Yes Once the software has been initially installed on the handset the remote control feature allows you to change activate deactivate the software at any time Who pays for the forwarded texts The network provider of the target phone will be charged for any forwarded texts sent to the pre defined number If the user has itemized billing it may be the case the predefined number is displayed on their bill It is therefore advisable to use a different SIM card when spying on TP How do transfer the file to the phone You can transfer the file by either Infra red or by using the cable supplied with the handset We recommend using Bluetooth as this is the quickest and easiest method which takes seconds A guide to using Bluetooth can be found in the document Why am I not receiving any texts The most common problem is the TP does not have any credit left Without
Download Pdf Manuals
Related Search