Operating Instructions
Contents
1. 2 5 Initial Settings Before using the device we recommend you to enable the Automatic Record function and set up the correct date and time 18 2 5 1 Set Automatic Recording To enable the recording to start automatically after you turn on the power do the following PAR 1 Pressthe button to enter the OSD menu 2 Pressthe V button to select Automatic Record and press the OK button 3 Pressthe A W button to select On and press the OK button 4 Pressthe button to exit the menu 2 5 2 Set the Date and Time Date Time To set the correct date and time do the ED following 12 _o0 1 Press the gt button to enter the A eva 2 Press the amp V button to select Date Time and press the OK button 3 Pressthe W button to adjust the value and press the OK button to move to another field 4 Repeat step 3 until the date and time setting is complete Note When the battery is drained dry the user must reset the date time before the function automatic record is started If the user doesn t reset the date time the device will give you alert you can see the Gi as attached afterone minute andthe automatic record will be started but the video will not have date time 19 3 Using the Car Recorder 3 1 Recording Videos 3 1 1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled the camcorder automatically tur2. 3 Then tighten the knob to make sure the device is securely locked in place 16 2 3 Connecting to Power Use only the exclusive car adapter to power up the device and charge the built in battery 1 Connect one end of the car adapter to the USB connector of the camcorder 2 Plugthe other end of the car charger to the cigarette lighter socket of your vehicle Once the vehicle engine is started the camcorder automatically powers on Note 1 The orange LED lights up while the battery is charging 2 Please take note if the environment temperature reaches 45 C or above the car adapter still can supply power to camcorder but it will not charge the battery This is the characteristic of Lithium polymer battery and is not a malfunction 17 2 4 Powering the Camcorder On Off 2 4 1 Auto Power On Off Once the vehicle engine is started the device automatically turns on If the Automatic Record function is enabled the recording will automatically start right after the camcorder powers on See Set Automatic Recording 2 5 1 Once the vehicle engine shuts down the camcorder automatically saves the recording and turns off the power within 10 seconds See Delay Shutdown 4 2 2 4 2 Manual Power On Off To manually turn on the power press the POWER button To turn off press and hold the POWER button for at least 2 seconds To reset press and hold the POWER button for at least 4 seconds
3. Exif 2 2 Electronic shutter ad Auto 1 2 1 2000 sec 3 Axis G Force sensor 33 Description Speaker Interface Mini USB Mini C Type HDMI Built in 470mAH Li polymer rechargeable This battery is NOT replaceable Operating 10 60 C Temperature Battery Operating E Humidity 20 70 RH Storage 20 80 C Temperature Dimensions 63 x 70 x 28 7 mm Weight Approx 94g 3 302 34 Trouble Shooting Problem Function key can not work after the screen become blue color or after formatting the card or the screen show on the process Solution reset the device via press and hold the power key for over 4 seconds Problem why the device start Emergency Recording just due to slight vibration in the car Solution Please adjust the function of COLLISION DETECTION to LOW SENSITIVITY If you adjust to OFF then the device will NOT start to have EMERGENCY RECORDING when you happen to the car accident Problem Why the recording file is error or damage File can not playback Solution Please be sure the memory card speed is over Class 6 Also please format the memory card before you start to use it Problem The voice can not support after the device link with TV via HDMI Solution The device use the format of H 264 ADPCM not AAC The voice can not support if the TV support AAC format Problem The TV screen will have oil slick or unclear status Solution Please be sure the windshield c
4. Drive Priority 2 Scenery Priority S See section 4 2 Menu Tree for more details 4 Date and time Indicates the current recording date and time 5 Guide icon Press the button to enter the OSD Menu menu Guide icon Press the Abutton to switch to Playback Playback mode 7 1080P 1920x1080 720P 1280x720 EJ Battery Indicates the remaining battery power 22 Prompt im Prompt NOT reset of date time of date time uc D Press the W button to stop the recording Press the OK button to continuously record the video in one file until the recording is manually stopped Guide icon Emergency 3 1 6 Taking Photographs xp 201401101 12 0 0 00 You can also use this camcorder to take photos of the current scene LAIT uL S NE U E Dio da MEN From the standby screen press the VY button to take a photo E Note If recording is in progress press the W button to stop the recording first 3 2 Playback Videos and Photos 1 If recording is in progress press the W button to stop recording The standby screen is displayed 2 Pressthe button to enter the OSD menu 3 Press A W button the select File Playback and press the OK button 4 Pressthe A W button to select the file category that you want to browse and press the OK button 5 Pressthe A W button to view the bias previous or the next file and press EORR the OK button to view the file in full sc
5. is in the process of shutting down or operating Failure to comply could corrupt the files or damage the unit m AClass 6 Micro SD card with 8GB capacity or more is recommended Max support up to 32GB m Before using this unit format the Micro SD Card by this unit FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e HReorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio T V technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following t
6. to the unit but the lithium polymer battery will not be recharged This is a typical feature of lithium batteries and is not a malfunction The unit may be affected by RF interference from mobile phones If the interference is significant use mobile phone as far away from the unit as possible Safety Information A N Caution Observe the following cautions when installing this unit m tis recommended that the unit should be installation by a professional The installation requires specialty and technical experience to ensure safety entrust the dealer to carry out the installation m Make sure no wires are damaged Avoid damaging any wires while making the connection by keeping away from screws on the chassis or moving parts of seats Never twist the wires or position them near a heat source m Make sure the unit is installed correctly Avoid installing the unit at a location subject to vigorous vibrations The ideal installation location is near the back mirror where an optimal view can be obtained Make sure the lens is within range of the windshield wiper so that a clear view is ensured DO NOT install the unit on tinted window glass as that could damage the light colored film Make sure the unit is installed at a location that is free from any influence of thermal film and away from any device that may generate electronic interference Precautions when using a Micro SD Card m Never remove the SD card when the unit
7. 2 Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains 3 Do not touch the lens with your fingers Finger grease may be left on the lens and will result in unclear videos or snapshots Clean the lens on a regular basis 4 Donotinstall the device on a tinted window Doing so may damage the tint film 5 Make sure that the installation position is not hindered by the tinted window 6 In order to avoid the ripple in the LCD screen due to the car engine vibration suggest the driver to shift the gear to N Position for the temporary stop 10 Caution Use the authorized charger only Never disassemble by yourself Never short circuit the battery Exposing the camcorder to open flames can cause explosion Due to local laws and vehicles safety considerations do not manually operate the device while driving 11 1 1 1 Introduction Features Full HD Car Camcorder 1920x1080 O 30fps 2 4 LCD color screen 128 degree Wide angle lens Motion detection Automatic Emergency recording for collision detection Supports Micro SDHC up to 32GB Class 6 or greater speed required for HD video 1 2 Package Contents The package contains the following items In case there is any missing or damaged item contact your dealer immediately 12 Car Recorder Bracket a S a i L Car adapter Quick Start Guide CD ROM Warranty Card 1 3 P
8. Panasonic Driving Recorder Model CY VRP110T1 T2 T3 TA T5 Operating Instructions Please read this instructions carefully before using this product and keep this manual for future reference 24240482301 A PTW0813 0 Printed in China Contents Safety Information seei a EEE SKEE EEEE 3 ECC Slal Mi lil een ia se sme ni 8 WEEE NOMIC eres sien suc Ser Aerie succes cuca nid itk aan ce d 9 CE Regulatory Note es ioi iir eee Siete 10 Notes on Installation acea Lote aae tm uso aea et pocos dae Dope dete dna 10 GU ME 11 DENTE OCLC TION D MEN 12 1 1 fas gt mM ERE 12 1 2 Package Contents ccssssscccceeeeeeeeesseseseneeens 12 1 3 Product Overview essere 13 Getting St ft dsri s amati 14 2 1 Inserting the Memory Card 14 2 2 Installing in Vehicles 15 2 2 1 Mount to Windshield sssssssee 15 2 2 2 Adjust the device position 16 2 3 Connecting tO POWOF dx das ses stod ijas 17 2 4 Powering the Camcorder On Off 18 2 4 1 Auto Power On Off ccccccccccesseeeceseeeeeeseeeeeeeeeeees 18 2 4 2 Manual Power On Off eese 18 2 5 Mia Seting S enna taadaa 18 2 5 1 Set Automatic Recording ss 19 2 5 2 Set the Date and TimMe cccccccccccecececeeeeeeeeeeeee
9. Playback Screen Video Playback Screen Photo Playback Screen rmm LX Mem Desor ptiom 0000 Date and time Indicates the recorded date and time Guide icon Press the button to return to file selection Back display Guide icon Press the amp button to view the previous Previous video photo Guide icon Press the OK button to pause the video Pause playback Indicates the elapse time Battery Indicates the remaining battery power 4 Guide icon Bess the W button to view the next video photo Next 26 3 2 4 Deleting Files To delete file s do the following 1 If recording is in progress press the W button to stop recording 2 Pressthe gt button to enter the OSD menu 3 Press the A amp W button to select ENSEM File Deletion and press the OK button 4 Pressthe amp V button to select the file category and press the OK button 5 Pressthe A V button to select the file that you want to delete and press the OK button to enter the Delete menu Ut E Delete All II ti y R s 6 Pressthe A W button to select an option Wem Description Delete One Delete the current displayed file Delete All Deletes all files 7 Pressthe OK button to confirm delete Note Deleted files CANNOT be recovered Ensure the files have backup before deletion 4 Adjusting the Settings 4 1 You can customize the video recording and other general settings Using th
10. Please also verify warnings and precautions regarding the vehicle s air bag m Make sure the wiring does not hinder passengers from getting in out of the vehicle Make sure the wiring is properly fixed to ensure safe driving N This pictograph intends to alert you to the presence of important operating instructions and installation Caution instructions Failure to heed the instructions may result in injury or material damage AN Caution Observe the following cautions when using this unit m his uniti dessigned for use exclusively in vehicles m Never store the unit in a dusty or dirty place or near the vehicle s air con heater Long term exposure to said environment may damage the unit m Never install store the unit in a high temperature environment as it could result in damage Safety Information N Caution Observe the following cautions when using this unit m When disposing of the unit follow statutory regulations to recycle the built in lithium battery so as to prevent environmental pollution m For some vehicles the unit continues recording after the engine has being shut off In such a case the following measures shall be taken Manually shut off the cigarette lighter or remove the vehicle power connector from the cigarette lighter m Always keep the lens clean to ensure clear images of driving m Inthe event the ambient temperature reaches 45 C or higher the vehicle power connection will still supply power
11. amcorder len is clean before you attach the device on the windshield 35 36 Problem Why the sound of recording file can not heard when using other playback software Solution Please use the QUICKTIME PLAYER software from the CD in the gift box package Problem Why the right figure appears on screen when power on Solution Remind the user to reset the time before start to use the device Panasonic Corporation Web Site http panasonic net
12. e Menu via the on screen display OSD menus 28 Menu P 1 4 ELO Menu P 2 4 K ZZ Date Time Driver Fatigue Alert es js Y o Menu P 3 4 co Menu P 4 4 K ZZ sav Po a vo If recording is in progress press the W button to stop recording Press the gt button to enter the OSD menu Press the W button to select a menu option and press the OK button to enter the selected menu Press the W button to select the desired setting and press the OK button to confirm the setting Press the button to exit the menu 4 2 Menu Tree Hefer to the below table for details on menu items and available menu options Select the file category Video Emergency Kai ps that you want to view Picture Default Video Press W button to adjust the value press Date Time Set the date and time the OK button to switch the field and confirm Default On Time Stamp Enable Disable the date On Off stamp Default On 1080p 1920x1080 Resolution Set the video resolution 720p 1280x720 Default 1080p Press A W button to Set the exposure set the exposure level ad compensation You may customize it l between 1 0 1 0 Default 0 0 Driving Priority Calculates exposure based on the entire image area but provides greater exposure Driving Priority Scenery to the center of a subject Priority Scenery Priority Default Driving Priority Calculates exposure based on the entire image area W
13. ees 19 Using the Car Recorder eee 20 3 1 Recording Videos ccceeessseseeeeeeeeeeeeeesssseeeeeess 20 3 1 1 Record videos while driving 20 3 1 2 Driver Fatigue Alert ccccccceeeeeeeesesssseeeeeees 20 3 1 3 Record all other types of videos 21 3 1 4 Emergency Recording ssssss 21 3 1 5 The Recording Screen sesussse 22 3 1 6 Taking Photographs eeeeseeessssss 23 3 2 Playback Videos and Photos 24 3 2 1 Flayitig VIGO dio st oio a e eet lua san 25 3 2 2 Viewing POIDS uie c mette acu o a eat teas 25 3 2 3 The Playback Screen sssss 26 3 2 4 Beute 27 Adjusting the Settings eee 28 4 1 Jsa mhe Men s a 28 4 2 Men Tre Gerena a EE 29 Installing the Software 32 specificatonss s 2 33 Trouble Shooting ei gas gs 35 This pictograph intends to alert you to the presence of important operating instructions and installation Warning instructions Failure to heed the instructions may result in severe injury or death N Warning Observe the following warnings when operating this unit m Driver shall not watch the screen of the recorder or operate the device while d
14. hen enabled the Driver Fatigue camcorder sounds an On Off Alert audible tone after an hour Default Off of driving Smart Scene Mode Set the duration for the On Turn Off After 30 LCD Setting display to automatically sec Turn Off After 3 turn off right after video Menu option Available option recording starts min Off Default On Enable Disable the voice On Off Default On recording Enable Disable the beep On Off Default On Enable Disable the Automatic device to automatically On Off Record record video after the Default On device is turned on Set the recording duration Record Interval for each recorded video file 3 min 5 min Default 3 min Enable Disable the motion detection If this function is enabled and the power off button is pressed the system alert message Press OK Key to Power off or enter motion On Off detection after 10sec Default Off will pop on the screen Under motion detection mode the device will automatically start recording when any object movement is detected Enable Disable the collision detection If this High Sensitivity function is enabled and Normal Sensitivity any collision is detected Low Sensitivity off the device will Default Normal automatically trigger the Sensitivity emergency recording Motion Detection Collision Detection 30 Set the delay duration 10 sec Off Delay Shutdown before tu
15. ns on and starts recording Recording will automatically stop when the engine is switched off Or press the W button to stop recording manually Note On some cars the recording will continue when the engine is switched off If this happens do one of the following Manually turn off the cigarette lighter Remove the car adapter from the cigarette lighter 3 1 2 Driver Fatigue Alert 1 Press the lt button to enter the OSD menu 2 Press the A W button to select Driver Fatigue Alert and press the OK button 3 Press the amp W button to select On and press the OK button Driver Fatigue Alert function will remind the driver should take a rest after A continuing to drive for over one hour via bi bi sound from the device and also the alert picture as enclosed will be appear in the LCD screen The product will remind the driver again after 30 minutes as each interval But the product will recalculate the alert time If the car stop moving over 5 minutes 20 3 1 3 Record all other types of videos 1 Press the OK button to start recording 2 Pressthe W button to stop recording Note 1 One video file is saved for every 3 or 5 minutes of recording See Using the Menu 4 1 2 The device saves the recording in the memory card If the memory card capacity is full the oldest file in the memory card is overwritten 3 1 4 Emergency Recording During Video Recording press the OK button to en
16. reen Emergency Picture Note 1 From the standby screen you can directly enter Playback mode by pressing 4 amp button The last recorded video is displayed on the screen 2 There is no recording function if the device attach HDMI cable 3 If the device attach HDMI and then link to TV the TV screen will show the Preview tatus but the device screen show the red frame only 24 3 2 1 Playing Videos To play videos do the following 1 If recording is in progress press the W button to stop recording Press the gt button to enter the OSD menu Press the A W button to select File Playback and press the OK button Press the A W button to select Video or Emergency and press the OK button Press the 4 W button to browse for the desired video file and press the OK button to play D the video US oats Video 01 06 27a elu 12 00 00 Press the OK button to pause mens r the playback Press it again to kw 3 resume PESE EAS BV EK 3 2 2 Viewing Photos To view photos do the following 1 If recording is in progress press the W button to stop recording Press the gt button to enter the OSD menu Press the A W button to select File Playback and press the OK button Press the W button to select Picture and press the OK button Press the W button to browse for the desired photo file and press the OK button to view the file in full screen 25 3 2 3 The
17. riving Watching the screen or operating the unit prevents distracts from focusing on road safety and could result in a traffic accident Park the vehicle in a safe location before operating the device m Never power the unit via an extension cord directly connected to the battery as to do so runs the risk of a short circuit and burnt PCB Please use the cigarette lighter socket as a power connection point m Make sure a correct power supply is used This unit is suitable for a vehicle equipped with a negative ground 12V 24V battery DO NOT use on any other battery system m Never dismantle or modify the unit Never dismantle the unit or attempt to modify or repair it on your own to do so could damage the unit or result in electrocution If the product requires servicing please consult your dealer or our service station m Do not use this unit when it is out of order If the unit is out of order no power no sound etc or operates abnormally ingression of foreign objects soaked by rain or emits smoke or an odor immediately switch off the unit and disconnect the power supply then consult the dealer or service station for assistance Safety Information N Warning Observe the following warnings when installing this unit m Install the product so that it does not hinder the view of the vehicle m Never install the unit within the range of air bag movement or in a position that obstructs activation of the of air bag
18. rning off the power Present a crisp and clear picture quality with On Off WDR harmonious contrast in a high contrast high Default Off discrepancy environment English RE PX f j fx Seo AA Default 10 sec aa Pyccku Deutsch Francais Italiano Espanol Portugu s T rkce Bahasa Indonesia Bahasa Melayu RA Ine ng YkpaiHcbka Default English File Deletion Delete the file s ie asij aa Default Reset all settings to Yes NG factory default settings Set the on screen display Language menu language 31 5 Installing the Software 1 Place the CD disc bundled with the car camcorder in your PC Laptop optical drive 2 Ifthe CD does not execute automatically please use Windows File Manager to execute the Install CD exe file in the CD The following screen will be shown up QuickTime PDF Reader User Manual Exit 3 Press the Menu item to start the installation process according to the instructions on screen 32 6 Specifications em NN 1 3 CMOS sensor The device 5V gt 1A Car Charger 2 24V Recording with battery charging 4 4 W Consumption Preview with battery charging 3 7W Storage media Supports Micro SDHC up to 32GB class 6 or above LCD display 2 4 LCD color TFT 112K pixels pins Wide Angle Fixed Focus lens F2 4 f 3 0mm Resolution Full HD 1920 x 1080 30fps Movie Clip HD 1280 x 720 30fps 3M Format DCF JPEG
19. roduct Overview Top and Bottom Views F T Sims 6 HD Mini HDMI Connector Note To operate the device press the corresponding buttons 7 10 11 12 according to guide icons shown the screen 13 2 Getting Started 2 1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder Push the memory card until it clicks into place Use class 6 or above the micro SD cards for this camcorder It is recommended to format the micro SD cards before the initial use To remove the memory card Push to eject the memory card out of the slot Note 1 Do not remove or insert the memory card when the device is powered on This may damage the memory card 2 Please use a 8GB Class 6 or above Micro SD card Support to 32GB as the maximum 3 Please format the micro SD cards before the initial use 14 2 2 Installing in Vehicles 2 2 1 Mount to Windshield 1 Attach the bracket to the device Slide it into the bracket holder until you hear a click 2 With the suction cup laying flat position the suction cup on the windshield 3 Hold thebase firmly on the windshield and press down the clamp to mount the car holder to the windshield Make sure the base is securely locked in place I5 2 2 2 Adjust the device position 1 Loose the knob to swivel the device vertically 2 Loose the knob to swivel the device horizontally up to 360
20. ter emergency recording mode the Emergency message will be shown immediately on the upper left corner of the screen and the recorded file will be protected To stop the recording press the W button ret ra um MIHI T Boe 4 i y j AV X L4 DA 00 00 no T p Ss Ex c Oo c i cm A tl Note 1 If the Collision Detection function is enabled and a collision is detected the device will automatically trigger the emergency recording 2 If the Collision Detection function is enabled and a collision is detected the emergency recording function of the device will automatically be triggered The emergency recording file is created as a new file which will be protected to avoid being overwritten by normal cycling recording A 8 GB or above memory card can save up to 10 emergency video files The alert message of Emergency files are full will pop up on the screen when the emergency recording files are full and the oldest emergency file will be automatically deleted when a new emergency recording file is created 3 Emergency Recording can happen only in the normal recording status 21 3 1 5 The Recording Screen Ne tem lt Indicates the recording duration Indicates sound will not be recorded with the 2 Voice Record video Enter the OSD menu to enable Voice Hecord There are two options for the Smart Scene S Mode mart o 3 Scene Mode 1
21. uropean Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal CE Regulatory Notice Herewith confirm to comply with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio and Telecom device 1995 5 EC the Low Voltage Directive 2006 95 EC the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive 2002 95 EC Turkish EEE Directive the Commission Regulation EC No 1275 2008 implementing Directive 2005 32 EC of the European Parliament and of the Council with regard to eco design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment and the Directive 2009 125 EC of the European parliament and of the council establishing a framework for the setting of eco design requirements for energy related products Notes on Installation 1 Install the device near the rear view mirror to obtain the best open field view Do NOT install the camcorder in a location that will obstruct your required driving view
22. wo conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment WEEE Notice Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste E Eo proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the E
Download Pdf Manuals
Related Search