BTH-300 User Manual
Contents
1. than 1 sec To place a call using voice dialing press the Power button once you will hear a tone If you are on a call using your phone handset you can transfer the call to your BTH 300 by a long press of the Power Talk button The following additional features may be available if your phone supports the Handsfree Profile Call Transfer back to phone To transfer a call from your BTH 300 back to your phone press and hold the Power Talk button When you hear a tone the transfer has been completed and you can release the button Call Reject To reject a call without answering when the handset is ringing press and hold the Power Talk button When you hear a tone the call has been rejected and you can release the button Last Number redial To redial the last number double short press the Power Talk button until you hear a tone the last number has been redialed During a call press the Volume button to adjust the volume During a call simultaneously press the Volume button once to mute the microphone When muted the red Status Indicator light will be on To take the microphone off mute simultaneously press the buttons again2. BTH 300 User Manual FEATURES 4 _ __ gt 1 Charging port 2 Power Talk button with Status Indicator light 3 Volume button 4 Microphone 5 Volume button CHARGING Connect the charger to AC power and then to your BTH 300 The red Status Indicator light will be steady on while charging and turn off when the BTH 300 is fully charged POWER ON OFF Press and hold the Power Talk Button for two seconds long press to turn the BTH 300 On When in Stand by press and hold the Power Talk Button for five seconds long press to turn the BTH 300 Off The Status Indicator flashes blue when the BTH 300 is on When the battery becomes low the red Status Indicator will be on and you hear the beep tones through the device PAIRING and CONNECTING 1 Place the BTH 300 in pairing mode by pressing and holding the Power Talk button for five seconds Release the buttons when the Status Indicator light begins to flash red then blue 2 Use your phone s menu to search for Bluetooth audio devices and select BTH 300 whenis appears on the display Note In some circumstances the pairing process can take up 2 minutes to complete 3 When then phone display asks for a passkey enter 0000 The Status Indicator flashes blue twice quickly once the BTH 300 is successfully paired and connected If pairing fails try again following the steps USING YOUR BTH 300 To answer or end a call short press the Power Talk button Less
Download Pdf Manuals
Related Search